Documente Academic
Documente Profesional
Documente Cultură
Engineers around the world have been using the PDA to verify the
bearing capacity of all types of deep foundations for more than 30 years.
High strain dynamic tests, as tests performed with PDAs are commonly
known, are carried out quickly and are non-destructive. Properly
interpreted dynamic test results (after PDA data are analyzed with
CAPWAP software) correlate very well with foundation capacities
obtained from conventional static load tests. The test also confirms the
integrity of the foundation element. When dynamic testing is performed
during initial driving of piles, it also provides information on driving
hammer performance and driving stresses.
High Strain Dynamic Tests are standardized by ASTM D4945. All models
of PDA, as well as Pile Dynamics strain transducers and accelerometers,
conform to those standards.
www.pile.com
www.pile.com