M Clear Height of Opening M Top of the Gate El. Sill Level El. Height of each Stoplog Unit M Number of Units Provided Nos. Location of Skinplate U/S or D/S Location of Seals U/S or D/S C/c of Tracks M C/c of Side Seals M Type of Stoplog Fixed Wheel Type or Sliding Type No. of Horizontal Girders in Each Unit Are the units interchangeable Type of Side Seal Type of Bottom Seal Weight of Each Stoplog Unit Ton Weight of Embedded Parts Ton Operation under balance/ unbalance load Top of track plate EL
Tender for Civil and Hydro-Mechanical
works
VOLUME - III
CONTRACTOR Data
Section: 4.15 -
Bidders Stamp and Signature
TDS Penstock Intake Stoplog and Gantry
Crane Sheet No. 1 of 2
Alaknanda Hydro Power Company Limited
330 MW Shrinagar Hydro Electric Project
in Uttaranchal State
3.0
DATA SHEET FOR GANTRY CRANE
Description 1. 2. 3. 4. 5. 6. 7. 8. 8 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. i. ii. iii. iv. v. vi. vii. viii. ix.
CONTRACTOR Data
HOIST Capacity including 20 %
Reserve Hoisting and Travelling Speed Total lift of gate considered. H P and type of motor for hoist and Long Travel Size and type of brake for hoist and Long Travel Size and type of standard gear box for hoist and Long Travel No. of rope falls and the size, construction of wire rope , its breaking strength Nos of rope drum and no. of layers of rope on drum Size and no. Spur gear reduction provided. Size and type of flexible couplings provided. Type of position indcator provided. Is there facility for manual operation of the hoist. No. and Size of Long Travel Wheels Type and no. of antifriction bearing provided for wheels. Section and length of long travel rails Height of crane from top of rail to the bottom of main girders. C/c of L T rails. Wheel base. Type of buffer provided. Material specification for Rope drum Spur gears pinions. Shafts Wire rope sockets Bush bearings. Make of plummer blocks. L T wheels. L T wheel bearing.