Documente Academic
Documente Profesional
Documente Cultură
The three new versions of the tried-and-tested level sensor can be used
in aqueous media, coolants and cleaning solutions or oils. Thus they are
suitable for continuous level monitoring of almost all liquids. ifm electronic
offers the efector gwr with two (order no. LR700s) or four (order no.
LR8000) switching outputs or with switching and analogue output (order
no. LR3000).
The modular sensor system consists of the sensing head, the probe and
optionally the coaxial pipe. The microwave pulses are transmitted by the
sensor head and guided along the probe. If the microwave pulse hits the
medium to be detected, it is reflected and evaluated by the sensor. The
sensor is installed in the tank using a process connection or flange. The
user can shorten the probes and thus adapt them individually between
100 mm and 1600 mm. A coaxial pipe is required for the unit to function
correctly in low dielectric media.
wpi_390_print.jpg Contact
ifm electronic gmbh
Level sensor efector gwr Friedrichstr. 1
45128 Essen
www.ifm.com
Tel.: 0201 / 24 22-0
Fax: 0201 / 24 22-1200
e-mail: info@ifm.com
Simone Felderhoff
Press officer
Tel. 0201 / 24 22-1411
Texts / photos can be found on our website. www.ifm.com
simone.felderhoff@ifm.com