Sunteți pe pagina 1din 9

#############################

#Samsung S8000 Tips & Tricks#


#############################
Last edited 20 April 2010 by pythonian4000
============================================================================
Summary of codes:
-----------------
All these codes (except Master key for service menu) automatically activate
when entered correctly. You don't need to press "Call" or anything, and
an incorrectly entered code will do nothing - you will stay on the keypad,
so can correct the code.
Check Firmware: *#1234#
Check IMEI: *#06#
Check Network, SIM lock etc: *#7465625#
Hard reset to factory settings: *2767*3855#
Test menu: *#0*#
Debug menu:
- *#7412359#, then press # four times to get to main menu.
- *#197328640# (goes straight to main menu)
Service menu:
- Old firmware: *#6984125*#
- New firmware (e.g. S8000XEJA1): *#5239870*#
From service menu, Master Key needed to enter Internals menu:
- Old firmware: *#9072641*#
- New firmware (e.g. S8000XEJA1): *#7092463*#
============================================================================
Turn on camera LEDs:
--------------------
1. Go to Test menu (see top of file for code)
2. Press 7 - "MegaCam"
~ thequark
============================================================================
Capture a screenshot of a video (e.g. YouTube):
-----------------------------------------------
1. Play or stream the video with Video Player
2. Pause the video
3. Press the camera button
~ inm
============================================================================
Use WiFi as internet for your Java apps:
----------------------------------------
1. In the main menu go to the games folder
2. Tap on "More"
3. Tap on "Connections"
4. Choose your WiFi connection
~ srujan
============================================================================
Use front (video call) camera instead of normal camera to take pictures:
------------------------------------------------------------------------
1. Go to Debug menu (see top of file for code)
2. Press 6 and enter video settings
3. Press 5 to use internal camera instead of the 5mp camera
Repeat the above to go back to using the normal camera.
~ danblack999
============================================================================
Run Java apps at native resolution, and remove the virtual keys at the bottom:
------------------------------------------------------------------------------
"Edit the Manifest file in the .jar (open the jar in Winrar, extract the file,
edit in notepad, drag back to the winrar window).
In the manifest file, add the following lines:
MIDlet-Scaleup-Support: False
LGE-MIDlet-Width: 480
LGE-MIDlet-Height: 800
If you also want to lose the 'soft buttons' at the bottom, add the following lin
e:
MIDlet-Touch-Support: True
Add all 4 to the new opera mini 5 .jar file for a lovely browser experience!"
~ craigbeat
============================================================================
Enable the Mirror Widget:
-------------------------
1. Connect your Jet to your PC via USB an start TKFileExplorer
2. Connect the Jet and TKFE
3. Browse to the REGISTRY-folder on your Jet
4. Download the following INI-file to your PC: SettingWidget.ini
5. Open the file with Notepad and search for this entry: MirrorValue=0
6. Change 0 to 1 and save the file
7. Copy SettingWidget.ini with TKFE back to the REGISTRY-folder on your Jet
8. Disconnect your phone and restart it
9. After booting up you'll have a new Widget in your Sidebar on the Desktop.
~ designoo
============================================================================
Disable the operator widgets on the three desktops:
---------------------------------------------------
1. Connect your Jet to your PC via USB an start TKFileExplorer
2. Connect the Jet and TKFE
3. Browse to the REGISTRY-folder on your Jet
4. Download the following INI-file to your PC: SettingWidget.ini
5. Open the file with Notepad and search for this entry: PLMN Value=1
6. Change 1 to 0 and save the file
7. Copy SettingWidget.ini with TKFE back to the REGISTRY-folder on your Jet
8. Disconnect your phone and restart it
9. After booting up you wont see those operator widgets on the Desktop anymore.
~ afiqq
============================================================================
Add a widget that links to any url you want:
--------------------------------------------
1. Open you browser
2. Surf to the page you want to create a link for
3. Click on "more" (icon beside the "back" button on the screen)
4. Select "add to bookmarks"
5. Fill in the info
6. Check "add to web clip"
"Now after doing so, go to your main screen and open the widgets bar.
You'll see a widget with the same name as the bookmark you've made.
If you click on it, it will open the browser and access that page instantly."
~ aridoasis
============================================================================
Add custom widget (.wgt) to phone:
----------------------------------
1. Upload the widget to http://innovator.samsungmobile.com/wgt/cp.do?platformId
=12
"Now you can send the link to your phone via sms."
~ sboulema
============================================================================
If you have problems streaming YouTube videos:
----------------------------------------------
1. Go to YouTube Mobile
2. Choose a video (click on the link, not the thumbnail)
3. Add "&mobileflash=1" without quotes to the end of the web address
4. Press "Go"
"Then you'll have the flash lite player.
Double click the player to watch fullscreen."
~ randyio
============================================================================
Delete locked Java apps:
------------------------
"Use Tkfile explorer (connect via usb and set phone to PC Studio)
---
Be warned! Tkfile for professionals! You can brick, i mean destroy your phone,
if you are not carefull!
---
Go to the locked folder:
USER\MASS\JAVA\LOCKED GAMES
and
USER\MASS\JAVA\LINKS
Right click on the folder of the locked app and select delete. (you may want =
to backup the folder first)
Disconnect from Tkfile."
Now on your phone:
1. Go to Service menu (see top of file for code)
2. Press 9 - "Internals" (see top of file for Master key)
"Now scroll down and choose Storage Settings. Then update Java DB.

Go to Menu>Applications/Apps & Games. Your locked app is gone.


PS:
- If Tkfile can t see your phone, than restart phone without unpluging from USB.
(Tkfile sould be closed during restart)"
~ Peetiboy
============================================================================
Open exported Contacts or SMS in Microsoft Access:
--------------------------------------------------
"When exporting contacts or sms to PC using New PC Studio, it saves file in *.np
f
or *.nef format respectively.
These are actually saved in Microsoft Access Database format... hence one can
change their extension to .mdb like
phonebook.npf ==> phonebook.mdb or
sms.nef ==> sms.mdb
and then open them in MS Access."
~ parabola
============================================================================
Change the params for the WOWHD preset in music player:
-------------------------------------------------------
1. Go to Debug menu (see top of file for code)
2. Press 5 for 'Audio'
3. Press 5 again 'AP Solution.Config
4. Press 4 'SRS WOW EAR Configuraion'
"now to explain every function u can see on the menu..
- TB_SIZE = sets how much voice will be heard on your earphones that is less b
ass,
less treble, more midrange. max 0x7
- [1]SPK_SIZE = sets the size of your headphones, large or small
- [2]SRS_MODE = always set this to 0 or 0x0...
- [3]WOW_CTL= voice will be adjusted like in TB_SIZE but doesn't affect the tre
ble
and bass level.
- [4]DEF_CTL = adjustment for treble or the sharp sound(high frequency)
- [5]TRUBASS_CTL= control the bass level or the thump sound...
- [6]FOCUS = controls the level for both midrange and treble sound. as the word
explains,
this function virtually focuses to one direction...counterpart for
stereo widening
- [7]IN_GAIN = adjust to change the gain level at the input side. In otherwords
,
this changes the volume on all levels(from 0 to 14).
- [8]OUT_GAIN = adjust to change the gain level at the output side.
list down the default settings before tampering if you dont want to reset the ph
one
to regain the original parameters.
note that the parameters above are changed by using decimals instead of hexadeci
mal.
0x3333=13107 in decimal.... use scientific calculator to make conversions easier
!
as you have noticed, i have not given any decimal values for the above parameter
s
since it's totally dependent on your earphones... if bass levels are too high, y
ou
will notice the midrange and treble levels to depreciate and vice versa. This is
beacause earphones only have a single speaker and it can never accommodate both
high
and low frequencies at the same time. adjust accordingly.
to make it easier, its best to increment or decrement parameter values by 500 de
cimal
units except for the 3 first parameters.
if parameter values given are too high, parameters will be automatically set to
minimum values.
--------
now, here's a simple trick to use the same modified SRS WOWHD EAR parameters for
your
bluetooth stereo headset....
this process is actually a function override using hardware and not software...
steps:
1. find an unused or damaged headphone with a 3.5mm jack.
2. plug it into the Jet's 3.5mm jack and select "Headset" if its a three connect
or type.
3. pair your stereo bluetooth headset and your phone and connect.
4. start the jet's music player and use WOWHD preset.
that's it!! its the sound you want out from your bluetooth headset!
>> it tricks the phone to using a wired headset when a bluetooth headset is actu
ally used.
the sound processor then streams the music with modified WOWHD params instead of
the
default.(this better be a proramming issue and not a hardware design fault..)
>> try removing the 3.5mm jack out and the sound gets crappy again. reinsert it
and all is good!
now the wired headphone is a bother so u can just cut the wire closest to the 3.
5mm jack.
leaving no wire hanging from the male jack is ok as long as you can pull the plu
g out
when not needed. better yet, cut everything that sways!! haha"
~ ivanrussell
============================================================================
Turn off EDGE network:
----------------------
1. Go in Settings/Network Settings/Network mode, and select GSM 900/1800
(switches off 3G)
2. Go to Service menu (see top of file for code)
3. Press 3 - "Network & call settings"
4. Press 4 - "Service domain"
5. Select "CS"
"The Edge logo has disappeared, and when you want use it ( to send MMS, to go
Internet) It is activated automatically."
~ nicollivier
============================================================================
Adjust the touch-screen hardware settings:
------------------------------------------
1. Go to Service menu (see top of file for code)
2. Press 9 - "Internals" (see top of file for Master key)
3. Press 5 - "Test cases"
4. Press 2 - "Test Touch Config"
5. WRITE DOWN ALL ORIGINAL SETTINGS BEFORE CHANGING!!
Incorrect new settings can make touch-screen very hard to use, and you will
need to do this again and put in original values.
"You can change the following settings to improve touch-sensibility and movility
:
MOVE 5
FLICK 150
PRESS 2
LONG 35
DOUBLE PRESS 800
DOUBLE PRESS 25
POLLING TIME 5
Any options not displayed above please leave them as they are."
In order to test the touch-screen you can enter the test mode:
1. Go to test menu (see top of file for code)
2. Press 9 - "Touch test"
~ Star13
============================================================================
Set phone to static 800MHz:
---------------------------
" Your phone right now is not running at a constant 800mhz speed.
The default mode that the phone comes with, is the Dynamic mode.
This mode is constantly switching between frequencies. From 800mhz to 700mhz and
so on,
but never above 800. This makes the phone slower than it should be.
What we will do, is completely safe and u do not have to open your phone or to m
odify
any software from it. U will NOT lose your warranty. You will simply have the ph
one
running at it's standard speed. I am very sure that this phone can reach higher
speeds
than 800mhz, but we will not go into that right now.
Ok what you need:
A Samsung Jet phone, no matter the carrier.
2 minutes, of your time. =)
Here we go:"
1. Go to Service menu (see top of file for code)
2. Press 9 - "Internals" (see top of file for Master key)
"If everything went well, you should have menu with different options.
Select option number 3 (Test Mode)
Now select option number 8 (Common)
Select option number 8 again (DVFS Configuration)
On the pad, press number 1
Press number 1 again
Press the "#" key
Press the back key
Now press the Cube button and you should be back to the interface.
U don't have to reset the phone. If you reset it, the speed will be back to dyna
mic.
You're done ! =P
You should notice a speed difference when zooming and navigate on pictures and w
hen
switching between the menu."
~ Ernet
============================================================================
Show All Current active Apps:
-----------------------------
Just hold down the cube Button (between The Call buttons) to show all current ac
tive applications.
~ John
============================================================================
TIP 1: Add Words first in T9 editor
-----------------------------
If you scroll using the little up and down arrows until you get the "Add word" b
ar
and then add the word you want to appear, this will then be displayed first by d
efault.

TIP 2:
------
Again in the T9 editor, to quickly get a new line, hold down the bar space!
(rather than go through the symbols pages etc).
~ Falkenburg
============================================================================
Quickly change into Silent Profile:
-----------------------------------
To quickly select Silent profile just go to the keypad and hold the # key
~ kkkk22
============================================================================
Reject callnumbers:
-------------------
menu --> settings --> application settings --> call --> all calls --> auto rejec
t --> Activation On
just put the number or contacts you want to reject..
~ Pentagram
===========================================================================
Show signal when writing a message:
-----------------------------------
When you are writing a message, just hit the volume up or down button to show ho
w much signal you have
sometimes usefull in some places where your signal is very bad
~ sollie
===========================================================================
Show only desktop pages with Dolphin browser:
---------------------------------------------
1) Enter Admin setting menu *#5239870*#
2) Internals
3) Enter Internal menu Master key *#7092463*#
4) Protocol settings
5) goto number 7, UAgent
should look something like this
SAMSUNG-S8000/S8000
XEII2 SHP/VPP/R5
Jasmine/1.0
Nextreaming
SMM-MMS/1.2.0
profile/MIDP-2.1
configuration/CLDC-1.1
SS-Widget/S8000-FM
now edit that to look exactly like this
Mozilla/5.0
(Windows/U/Windows
NT6.0/en-US)
AppleWebkit/533.3
(KHTML Gecho)
Chrome/5.0.356.2
Safari/533.3
Now when you go to any website using Dolphin, the site will display the Desktop
page
rather than redirect to its WAP mobile site.
~ Eoghan_2t7
===========================================================================

S-ar putea să vă placă și