Documente Academic
Documente Profesional
Documente Cultură
Feed back
It is nice programme and very useful for selection of proper valves for different application.
This will help in rectifying many of the hydraulic related problems also.
-Mr. P.V.Pillai
Senior General Manager, Mahindra Ugine Steel Co. Ltd., Raigad
-Mr. O.M.Kanna
Scientist B, V.R.D.E., Ahmednagar
It will be very helpful to understand the hydraulic system of our reheating furnace (Beam type) and
it will be helpful in maintenance.
This will beneficial for teaching students with 100 % confidence and I think this will helpful in Research and
Development application.
Dear Customers,
Year 2009 showed effect of economic slow down . This was an opportunity for many corporations to think for the
future course in terms of better processes, Knowledge enrichment, training, Quality systems. Every one realized that
Knowledge is power.
During the year Bosch Rexroth actively involved in supporting the customers in Knowledge enrichment with active
interaction in respect to training and tie ups for enhancing technical competencies in their organization.
We entered into many short term tie ups with customers and also signed MOU with a few for providing training to their
engineers and technicians on the subject of Hydraulics and Drive & Control topics. We involved ourselves in training
and spreading the base for an active industry institute partnership to lay a foundation to bridge the technological
gaps..
Our knowledge sharing activities have been well received by industries for 'Drive and Control' technologies. Our
initiatives in university education up gradation programme will help all our customers to source well trained technical
man power.
Our customers now understand “service quality”, “life cycle enhancement”, “lower running cost” and “improvement in
productivity” and hence proper knowledge to users is necessary to solve problems and achieve the objectives. We
are committed to enhance your knowledge in all 'Drive & Control' technologies.
Please do not hesitate to contact us for any special training needs on our Drive and Control technologies as Bosch
Rexroth are world leaders and only company to provide equipment and support on all Drives. Training for us is part of
our service organization SVH and hence we can offer our customers fields service, repairs and spare part support
from single window.
Yours sincerely
3
Training Calendar 2010
Contents
Sr.
No. Title Code Page No.
1 Forward - 3
2 Contents - 4
3 Monthwise training programme - 5, 6
4 Industrial hydraulics IH 7
5 Continuous control hydraulics CCH 8
6 Hydraulic contamination control and maintenance HCCM 9
7 Mobile hydraulics MH 10
8 Hydraulics and pneumatics for students HP 11
9 Customized training in industrial CIH 12
hydraulics at customer’s premises
10 Customized training program in advanced industrial CIHA 13
hydraulics at customer’s premises
11 Advanced hydraulics courses for 14
specific industry segment at our training centre
12 Steel mill hydraulics SP01 15
13 Machine tools hydraulics SP02 16
14 Hydraulic cylinders SP03 17
15 Hydraulics for Power generation SP04 18
16 Hydraulics for civil engineering SP05 19
applications
17 Press hydraulics SP06 20
18 Foundry hydraulics SP07 21
19 Axial piston pumps servicing SP08 22
20 Plastic machinery hydraulics SP09 23
21 Drill rig hydraulics SP10 24
22 Crane hydraulics SP11 25
23 Excavator and loader hydraulics SP12 26
24 Road construction machinery hydraulics SP13 27
25 Mechatronics SP14 28
26 Basic concepts of single axis Indra Drive & HMI IND001 29
27 Basic concepts of multi axis Indra Drive MLD-M & HMI IND002 30
28 Basic concepts of IndraControl PLC & HMI PLC001 31
4
Training Calendar 2010
5
Training Calendar 2010
Service Tax:
Service tax & CESS on service tax for all the courses will be extra on basic fees, as applicable at the time of
training/invoicing. Refer annexure for total cost Please send demand draft in favour of Bosch Rexroth (India) Ltd. payable at
Ahmedabad accordingly.
6
Training Calendar 2010
Industrial Hydraulics
IH
Learning Goals
< The participants should be able to
understand the physical parameters and
symbols, the construction and function
of hydraulic components.
< The participants should be able to read,
analyse and understand hydraulic circuits.
< The participants should be able to make
hydraulic assemblies on the Training Rig.
Content Fees
< What is ‘Hydraulics’? Rs.12,500/- per participant + Service Tax and CESS as
< Physical fundamentals and principles applicable
< Hydraulic components (pumps, motors, cylinders, valves:
directional, pressure, flow; accessories) Training Centre
< Fluid power symbols as per DIN ISO 1219 Ahmedabad
< Basic hydraulic circuits
< Instructions, guidance, and review for practical hydraulic Schedule
aspects 04.01.2010 to 08.01.2010
< Techniques of assembly, disassembly and conversion; 15.02.2010 to 19.02.2010
possibilities for handling and setting of typical components 08.03.2010 to 12.03.2010
< Practice by self-trial of circuit making on demonstration 22.03.2010 to 26.03.2010
power pack 19.04.2010 to 23.04.2010
< Instructions on storage, commissioning, trouble shooting, 10.05.2010 to 14.05.2010
maintenance and safety 07.06.2010 to 11.06.2010
< Overview of proportional hydraulic technology 21.06.2010 to 25.06.2010
19.07.2010 to 23.07.2010
Prerequisites 16.08.2010 to 20.08.2010
Technical knowledge 06.09.2010 to 10.09.2010
20.09.2010 to 24.09.2010
Participant Profile 11.10.2010 to 15.10.2010
Operation, maintenance, assembly and planning personnel, 15.11.2010 to 19.11.2010
designers and all those interested in Hydraulic Technology 06.12.2010 to 10.12.2010
20.12.2010 to 24.12.2010
Teaching and Learning Media
< Multimedia presentation Information and Registration
< Cut sections/Transparent models Girish S. Joshi
< Sample units and power units Manager-Didactics & Training
< PC animations Phone: (0)79 6613 2388 / 6613 2187
< Circuits simulation on trainer kit Email: joshi.gs@boschrexroth.co.in
Evaluation
Test will be conducted post course session.
7
Training Calendar 2010
Learning Goals
< The participants should be able to
understand the theory, construction
and functioning of electro-hydraulic
proportioanl and servo valves.
< The participants should be able to read,
analyse and understand typical circuits
with proportional and servo valves.
Content Duration
< Brief review of conventional valves 3 days
< Theoretical aspects of proportional hydraulics
< Component design of: Timings
- proportional directional, pressure and flow control valves 1st day 10.00-17.00 hrs
- directional servo and pressure servo valves and electro- 2nd & 3rd day 09.30-17.00 hrs
hydraulic controls for pumps
< Symbols as per DIN ISO 1219 Fees
< Electronic controls, PLC applications Rs.10,000/- per participant + Service Tax and CESS as
< Typical continuous control hydraulic circuits applicable
< Instruction on commissioning, filtration, maintenance and
servicing Training Centre
(with videos on proportional valves and servo valves) Ahmedabad
and trouble shooting
< Lab session Schedule
18.01.2010 to 20.01.2010
Prerequisites 29.03.2010 to 31.03.2010
Prior attendance of our Industrial Hydraulics Program or 26.04.2010 to 28.04.2010
equivalent knowledge otherwise is necessary 26.07.2010 to 28.07.2010
22.11.2010 to 24.11.2010
Participant Profile
Operating, maintenance, assembly and planning Information and Registration
personnel, designers and all those who desire a deeper Girish S. Joshi
understanding of electro-hydraulics Manager-Didactics & Training
Phone: (0)79 6613 2388 / 6613 2187
Teaching and Learning Media Email: joshi.gs@boschrexroth.co.in
< Multimedia presentation
< Cut sections/Transparent models S.G. Kelshikar
< Sample units and power units General Manager-SVH
< PC animations Bosch Rexroth (India) Limited
< Circuits simulation on trainer kit Near Vatva Railway Station, Vatva
Ahmedabad - 382 445
Distribution Phone: (0)79 6613 2162
Training manual Fax: (0)79 6613 2423
Participation certificate Email: kelshikar.sg@boschrexroth.co.in
8
Training Calendar 2010
Learning Goals
< The participants should appreciate and
realize the criticality of hydraulic contamination.
< The participants should be able to apply
control technology for the maintenance of a healthy
hydraulic system.
Content Duration
< Origins and types of hydraulic 2 days
contamination
< Hydraulic filtration, beta-value and Timings
cleanliness classes - NAS and ISO 1st day 10.00-17.00 hrs
< Suction, pressure and return-line filters, 2nd day 09.30-17.00 hrs
special types of filters such as duplex,
spin on etc. Fees
< Special filtration requirements for Rs.7000/- per participant + Service Tax and CESS as
proportional and servo valves, centrifuges, applicable
electrostatic precipitation filters
< Filtration checking devices: Training Centre
Testing kit, continuous monitoring equipment Ahmedabad
< Hydraulic fluids: their types, properties,
viscosities & temperatures; mixing of Schedule
fluids, oil-condition monitoring 15.03.2010 to 16.03.2010
< Sealing elements 27.09.2010 to 28.09.2010
< Commissioning, practical hints for
maintenance, and trouble shooting Information and Registration
Girish S. Joshi
Prerequisites Manager-Didactics & Training
Technical knowledge Phone: (0)79 6613 2388 / 6613 2187
Email: joshi.gs@boschrexroth.co.in
Participant Profile
Operating, maintenance, assembly S.G. Kelshikar
and planning personnel, designers General Manager-SVH
Bosch Rexroth (India) Limited
Teaching and Learning Media Near Vatva Railway Station, Vatva
< Multimedia presentation Ahmedabad - 382 445
< Cut sections/Transparent models Phone: (0)79 6613 2162
< Sample units and power units Fax: (0)79 6613 2423
< PC animations Email: kelshikar.sg@boschrexroth.co.in
< Circuits simulation on trainer kit
Further Recommended Training
Distribution IH/CCH (see page 8)
Participation certificate
9
Training Calendar 2010
Mobile hydraulics
MH
Learning Goals
The participants should be able to:
< understand control types in mobile machines - throttle
and load sensing control
< construction and functioning of hydraulic units used
in mobile systems such as pumps, valves, etc.
< different types of mobile machines and typical circuits.
< fault finding
Content Duration
< What is mobile hydraulics? 3 days
< Hydraulic pumps and motors for mobile
applications Timings
Pumps for open and closed circuits, 1st day 10.00-17.00 hrs
controls 2nd & 3rd day 09.30-17.00 hrs
< Control methods:
Throttle control and load sensing control Fees
< Sandwich type mobile control valves, Rs.10,000/- per participant + Service Tax and CESS as
mobile control blocks, safety valves, applicable
mobile filters
< Proportional and servo valves for mobile Training Centre
application Ahmedabad
< Various types of mobile machines and
their typical circuits Schedule
< Hydraulic fluids and filtration, 03.05.2010 to 05.05.2010
maintenance tips and trouble shooting 04.10.2010 to 06.10.2010
10
Training Calendar 2010
Learning Goals
< Students should be able to understand basics of
Hydraulics and Pneumatics.
< Design simple circuits.
< Hands on experience on trainer kits.
Content Duration
Hydraulics 3 days
Fundamentals of hydraulics
Hydraulic pumps and motors Timings
Control valves 1st day 10.00-17.00 hrs
Cylinders 2nd & 3rd day 09.30-17.00 hrs
Circuit building
Maintenance Fees
Rs.3000/- per participant + Service Tax and CESS as
Pneumatics applicable
Fundamentals
Compressor and compressed air Training Centre
Electro pneumatic concept Ahmedabad
Circuit building
Maintenance Schedule
05.07.2010 to 07.07.2010
Prerequisites 27.12.2010 to 29.12.2010
Engineering student of diploma or degree level
Information and Registration
Participant Profile Girish S. Joshi
Students of undergraduate / post graduate Manager-Didactics & Training
Phone: (0)79 6613 2388 / 6613 2187
Teaching and Learning Media Email: joshi.gs@boschrexroth.co.in
< Multimedia presentation
< Cut sections S.G. Kelshikar
< Sample units and power units General Manager-SVH
< PC animations Bosch Rexroth (India) Limited
< Circuits Simulation on trainer kit Near Vatva Railway Station, Vatva
Ahmedabad - 382 445
Distribution Phone: (0)79 6613 2162
Course material Fax: (0)79 6613 2423
Participation certificate Email: kelshikar.sg@boschrexroth.co.in
Evaluation
Test will be conducted to evaluate learning performance
11
Training Calendar 2010
S.G. Kelshikar
General Manager-SVH
Bosch Rexroth (India) Limited
Near Vatva Railway Station, Vatva
Ahmedabad - 382 445
Phone: (0)79 6613 2162
Fax: (0)79 6613 2423
Email: kelshikar.sg@boschrexroth.co.in
12
Training Calendar 2010
S.G. Kelshikar
General Manager-SVH
Bosch Rexroth (India) Limited
Near Vatva Railway Station, Vatva
Ahmedabad - 382 445
Phone: (0)79 6613 2162
Fax: (0)79 6613 2423
Email: kelshikar.sg@boschrexroth.co.in
13
Training Calendar 2010
Objective
< Every industry segment wants to know more on
hydraulics specific to their field and new
development trends, our experts in the field shall
impart training and share experience with the group.
< The OEM/end users will find this training ideal for
optimum use of equipment.
Course Content
< Hydraulic circuits for equipment specific Number of Participants
to the industry, design criteria, Preferably limited to 20
functioning
< Product training specific to the industry
< Hands on experience on products like
assembly/disassembly, testing, failure
analysis
< Trouble shooting and maintenance tips
Prerequisite Education/Experience
< Equivalent to graduate engineer/
diploma holders with a few years of
experience/senior technicians with
several years of experience
Please Note
If necessary the training course can be conducted at a convenient place other than our training centre,
provided the number of participants meets the norm.
14
Training Calendar 2010
Learning Goals
< To obtain industry specific knowledge of
hydraulic applications and usage.
Content Duration
< Hydraulics for various applications like 2 days
melting furnaces, rolling mills, AGC,
continuous casting, etc. Timings
< Components selection for steel hydraulics: 1st day 10.00-17.00 hrs
- Pumps 2nd day 09.30-17.00 hrs
- Valves, Proportional & Servo
- Accessories Fees
< Servo valves applications for steel mills Rs.7000/- per participant + Service Tax and CESS as
< Typical circuits and operations applicable
< Fluids and contamination control in
steel mills Training Centre
< Trouble shooting and maintenance tips Ahmedabad
for steel mills
Schedule
Prerequisites 05.04.2010 to 06.04.2010
Technical knowledge 02.08.2010 to 03.08.2010
15
Training Calendar 2010
Learning Goals
< To obtain industry specific knowledge of
hydraulic applications and usage.
Content Duration
< Hydraulics for machine tools, various 2 days
applications like GPM, SPM, CNC.
< Design parameters and products Timings
selection for machine tools: 1st day 10.00-17.00 hrs
- Pumps 2nd day 09.30-17.00 hrs
- Valves
- Electro hydraulic proportional and servo valves Fees
- Controls Rs.7000/- per participant + Service Tax and CESS as
- Filters applicable
< Standard power units
- Clamping Training Centre
- Filters Ahmedabad
< Trouble shooting and maintenance tips
Schedule
Prerequisites 02.03.2010 to 03.03.2010
Technical knowledge 13.12.2010 to 14.12.2010
16
Training Calendar 2010
Hydraulic cylinders
SP03
Learning Goals
< To obtain industry specific knowledge of
hydraulic applications and usage.
Content Duration
< Types of cylinders 1 day
- Tie rod construction
- Welded type Timings
- Mill duty 10.00 to 17.00 hrs
< Design criteria of cylinders
< Seals selection Fees
< Mounting styles Rs.4000/- per participant + Service Tax and CESS as
< Applications: industrial, mobile, steel plants, servo applicable
cylinders
< Trouble shooting and maintenance tips Training Centre
Ahmedabad
Prerequisites
Technical knowledge Schedule
12.04.2010
Participant Profile 05.08.2010
Operating, maintenance, assembly and planning
personnel, designers Information and Registration
Girish S. Joshi
Teaching and Learning Media Manager-Didactics & Training
< Multimedia presentation Phone: (0)79 6613 2388 / 6613 2187
< Cut sections/Transparent models Email: joshi.gs@boschrexroth.co.in
< Sample units and power units
< PC animations S.G. Kelshikar
< Circuits simulation on trainer kit General Manager-SVH
Bosch Rexroth (India) Limited
Distribution Near Vatva Railway Station, Vatva
Participation certificate Ahmedabad - 382 445
Phone: (0)79 6613 2162
Fax: (0)79 6613 2423
Email: kelshikar.sg@boschrexroth.co.in
17
Training Calendar 2010
Learning Goals
< To obtain industry specific knowledge of
hydraulic applications and usage.
Content Duration
< Hydraulic applications for power 1 day
generation like turbine governor control,
oil supply units, etc. Timings
< Typical circuits and design parameters 10.00 to 17.00 hrs
< Component selection for power generation hydraulics
- Pumps Fees
- Valves Rs.4000/- per participant + service tax and CESS as
- Servo and proportional valves applicable
- Logic elements
- Accessories - filters, accumulators, etc. Training Centre
< Trouble shooting and maintenance tips Ahmedabad
Prerequisites Schedule
Technical knowledge 15.06.2010
25.10.2010
Participant Profile
Operating, maintenance, assembly and planning personnel, Information and Registration
designers Girish S. Joshi
Manager-Didactics & Training
Teaching and Learning Media Phone: (0)79 6613 2388 / 6613 2187
< Multimedia presentation Email: joshi.gs@boschrexroth.co.in
< Cut sections/Transparent models
< Sample units and power units S.G. Kelshikar
< PC animations General Manager-SVH
< Circuits simulation on trainer kit Bosch Rexroth (India) Limited
Near Vatva Railway Station, Vatva
Distribution Ahmedabad - 382 445
Participation certificate Phone: (0)79 6613 2162
Fax: (0)79 6613 2423
Email: kelshikar.sg@boschrexroth.co.in
18
Training Calendar 2010
Learning Goals
< To obtain industry specific knowledge of
hydraulic applications and usage.
Content Duration
< Hydraulic applications for civil engineering like 1 day
- Hydraulic operated dam gates
- Radial gates Timings
- Vertical gates 10.00 to 17.00 hrs
< Typical circuits and design parameters
< Component selection for civil engineering application: Fees
- Pumps Rs.4000/- per participant + Service Tax and CESS as
- Valves applicable
- Logic valves
- Proportional valves and controls Training Centre
- Cylinders Ahmedabad
< Trouble shooting and maintenance tips
< Electrical interfacing Schedule
14.06.2010
Prerequisites 26.10.2010
Technical knowledge
Information and Registration
Participant Profile Girish S. Joshi
Operating, maintenance, assembly and planning Manager-Didactics & Training
personnel, designers Phone: (0)79 6613 2388 / 6613 2187
Email: joshi.gs@boschrexroth.co.in
Teaching and Learning Media
< Multimedia presentation S.G. Kelshikar
< Cut sections/Transparent models General Manager-SVH
< Sample units and power units Bosch Rexroth (India) Limited
< PC animations Near Vatva Railway Station, Vatva
< Circuits simulation on trainer kit Ahmedabad - 382 445
Phone: (0)79 6613 2162
Distribution Fax: (0)79 6613 2423
Participation certificate Email: kelshikar.sg@boschrexroth.co.in
19
Training Calendar 2010
Press hydraulics
SP06
Learning Goals
< To obtain industry specific knowledge of
hydraulic applications and usage.
Content Duration
< Types of press applications and typical circuits 1 day
< Design parameters for press hydraulics
< Component selection for press hydraulics: Timings
- Pumps 10.00 to 17.00 hrs
- Valves
- Logic elements Fees
- Proportional valves Rs.4000/- per participant + service tax and CESS as
- Cylinders applicable
- Press manifolds
< Trouble shooting and maintenance tips Training Centre
Ahmedabad
Prerequisites
Technical knowledge Schedule
04.08.2010
Participant Profile
Operating, maintenance, assembly and planning personnel, Information and Registration
designers Girish S. Joshi
Manager-Didactics & Training
Teaching and Learning Media Phone: (0)79 6613 2388 / 6613 2187
< Multimedia presentation Email: joshi.gs@boschrexroth.co.in
< Cut sections/Transparent models
< Sample units and power units S.G. Kelshikar
< PC animations General Manager-SVH
< Circuits simulation on trainer kit Bosch Rexroth (India) Limited
Near Vatva Railway Station, Vatva
Distribution Ahmedabad - 382 445
Participation certificate Phone: (0)79 6613 2162
Fax: (0)79 6613 2423
Email: kelshikar.sg@boschrexroth.co.in
20
Training Calendar 2010
Foundry hydraulics
SP07
Learning Goals
< To obtain industry specific knowledge
of hydraulic applications and usage.
Content Duration
< Applications of hydraulics in foundry equipment 1 day
< Typical circuits and design criteria
< Component selection for foundry applications: Timings
- Pumps 10.00 to 17.00 hrs
- Valves
- Proportional valves and controls Fees
- Cylinders Rs.4000/- per participant + service tax and CESS as
- Filters applicable
< Trouble shooting and maintenance tips
Training Centre
Prerequisites Bangalore
Technical knowledge
Schedule
Participant Profile 27.08.2010
Operating, maintenance, assembly and planning
personnel, designers Information and Registration
Girish S. Joshi
Teaching and Learning Media Manager-Didactics & Training
< Multimedia presentation Phone: (0)79 6613 2388 / 6613 2187
< Cut sections/Transparent models Email: joshi.gs@boschrexroth.co.in
< Sample units and power units
< PC animations S.G. Kelshikar
< Circuits simulation on trainer kit General Manager-SVH
Bosch Rexroth (India) Limited
Distribution Near Vatva Railway Station, Vatva
Participation certificate Ahmedabad - 382 445
Phone: (0)79 6613 2162
Fax: (0)79 6613 2423
Email: kelshikar.sg@boschrexroth.co.in
21
Training Calendar 2010
Learning Goals
< To obtain knowledge of servicing axial piston pumps
< Failue analysis
Content Duration
< Principles of hydraulic pumps and applications 2 days
< Axial piston pumps:
- Bent axis design Timings
- Swash plate design 1st day 10.00-17.00 hrs
- Various controls DR/DFR/DFLR/DFE, etc. 2nd day 09.30-17.00 hrs
< Installation tips
< Failure analysis and trouble shooting Fees
< Assembly, disassembly Rs.7000/- per participant + service tax and CESS as
< Testing and hands on experience in Service Centre applicable
22
Training Calendar 2010
Learning Goals
< To obtain industry specific knowledge of
hydraulic applications and usage.
Content Duration
< Applications of hydraulics in plastic machineries like: 2 days
- Injection moulding
- Blow moulding Timings
- Extrusion machine 1st day 10.00-17.00 hrs
< Typical circuits and design parameters 2nd day 09.30-17.00 hrs
< Component selection for plastic machineries:
- Pumps Fees
- Valves Rs.7000/- per participant + service tax and CESS as
- P/Q controls applicable
- Proportional valves
- Logic elements Training Centre
< Axial piston pumps and type of control for Ahmedabad
power saving modern controls
< Trouble shooting and maintenance tips Schedule
< Hands-on experience in Service Centre 03.06.2010 to 04.06.2010
01.11.2010 to 02.11.2010
Prerequisites
Technical knowledge Information and Registration
Girish S. Joshi
Participant Profile Manager-Didactics & Training
Operating, maintenance, assembly and planning Phone: (0)79 6613 2388 / 6613 2187
personnel, designers Email: joshi.gs@boschrexroth.co.in
23
Training Calendar 2010
Learning Goals
< To obtain industry specific knowledge of
hydraulic applications and usage.
Content Duration
< Applications of hydraulics in drilling rigs 1 day
< Component selection:
- Pumps Timings
- Mobile valves 10.00 to 17.00 hrs
- Accessories
< Typical circuits and operation Fees
< Trouble shooting Rs.4000/- per participant + service tax and CESS as
applicable
Prerequisites
Technical knowledge Training Centre
Ahmedabad
Participant Profile
Operating, maintenance, assembly and planning personnel, Schedule
designers 26.08.2010
24
Training Calendar 2010
Crane hydraulics
SP11
Learning Goals
< To obtain industry specific knowledge of
hydraulic applications and usage.
Content Duration
< Applications and types of crane 1 day
< Circuits of operation
- Open loop Timings
- Closed loop 10.00 to 17.00 hrs
- Throttle control
- Load sensing/LUDV Fees
< Components selection Rs.4000/- per participant + service tax and CESS as
- Pumps `applicable
- Control valves
- Accessories Training Centre
< Trouble shooting and maintenance tips Ahmedabad
Prerequisites Schedule
Technical knowledge 12.07.2010
25
Training Calendar 2010
Learning Goals
< To obtain industry specific knowledge of
hydraulic applications and usage.
Content Duration
< Application of hydraulics in excavators and loaders 1 day
< Types of circuits and operations
- Pumps Timings
- Control valves 10.00 to 17.00 hrs
- Accessories
< Maintenance tips and trouble shooting Fees
Rs.4000/- per participant + service tax and CESS as
Prerequisites applicable
Technical knowledge
Training Centre
Participant Profile Ahmedabad
Operating, maintenance, assembly and planning personnel,
designers Schedule
16.06.2010
Teaching and Learning Media
< Multimedia presentation Information and Registration
< Cut sections/Transparent models Girish S. Joshi
< Sample units and power units Manager-Didactics & Training
< PC animations Phone: (0)79 6613 2388 / 6613 2187
< Circuits simulation on trainer kit Email: joshi.gs@boschrexroth.co.in
26
Training Calendar 2010
Learning Goals
< To obtain industry specific knowledge of
hydraulic applications and usage.
Content Duration
< Application of hydraulics in road construction machinery 1 day
- Road compactors
- Pavers Timings
- Concrete mixers 10.00 to 17.00 hrs
< Concrete pumps
< Types of circuits and operation: Fees
- Open loop Rs.4000/- per participant + service tax and CESS as
- Closed loop applicable
- Throttle control
< Load sensing/LUDV Training Centre
< Components selection and functioning Ahmedabad
- Pumps
- Mobile valves Schedule
- Accessories 07.05.2010
< Maintenance tips and trouble shooting
Information and Registration
Prerequisites Girish S. Joshi
Technical knowledge Manager-Didactics & Training
Phone: (0)79 6613 2388 / 6613 2187
Participant Profile Email: joshi.gs@boschrexroth.co.in
Operating, maintenance, assembly and planning
personnel, designers S.G. Kelshikar
General Manager-SVH
Teaching and Learning Media Bosch Rexroth (India) Limited
< Multimedia presentation Near Vatva Railway Station, Vatva
< Cut sections/Transparent models Ahmedabad - 382 445
< Sample units and power units Phone: (0)79 6613 2162
< PC animations Fax: (0)79 6613 2423
< Circuits simulation on trainer kit Email: kelshikar.sg@boschrexroth.co.in
27
Training Calendar 2010
Mechatronics
SP14
Learning Goals
< To impart knowledge of mechatronics i.e. combination of
mechanical and electronic systems.
Content Duration
< Overview of hydraulics, pneumatics, electronics 3 days
< Concept of assembly and conveying systems
< Configuring of mechanical equipment and Timings
electronic controls for assembly and 1st day 10.00-17.00 hrs
conveying systems 2nd & 3rd day 09.30-17.00 hrs
< PLC technology and programming
Fees
Prerequisites Rs.6000/- per participant + service tax and CESS as
Technical knowledge and aptitude for applicable
control Technology
Training Centre
Participant Profile Ahmedabad
Operating, maintenance, assembly and planning personnel,
designers Schedule
14.07.2010 to 16.07.2010
Teaching and Learning Media 01.12.2010 to 03.12.2010
< Multimedia presentation
< Sample units Information and Registration
Girish S. Joshi
Distribution Manager-Didactics & Training
Participation certificate Phone: (0)79 6613 2388 / 6613 2187
Email: joshi.gs@boschrexroth.co.in
S.G. Kelshikar
General Manager-SVH
Bosch Rexroth (India) Limited
Near Vatva Railway Station, Vatva
Ahmedabad - 382 445
Phone: (0)79 6613 2162
Fax: (0)79 6613 2423
Email: kelshikar.sg@boschrexroth.co.in
28
Training Calendar 2010
Learning Goals
< To impart basic knowledge of
electric drives and controls.
Content Duration
Programming & parameterization of IndraDrive in 3 days
29
Training Calendar 2010
Learning Goals
< To impart basic knowledge of
electric drives and controls.
Content Duration
Programming & parameterization of IndraDrive using 3 days
30
Training Calendar 2010
Learning Goals
< To impart basic knowledge of PLC & HMI
controls.
Content Duration
< Interface of I/O modules with PLC 3 days
< Programming of PLC
< VCP communication with PLC Timings
< VCP Screen development 09.30-16.30 hrs
Fees
Prerequisites Rs.6000/- per participant + service tax and CESS as
Technical knowledge in Electronics applicable
31
Training Calendar 2010
32
1. TTT programme for CMTI faculty 2. Training session at Qatar Steel, Qatar
3. TTT programme for C.V.Raman faculty for Pneumatics 4. CCH Lab session at Ahmedabad
5. Hydraulic & Pneumatics training for students 6. Training session at Hindustan Zinc Ltd., Rajasthan
Registration
Please Note
< The enclosed registration format (or photocopy thereof), along with full payment (fees + service tax and
CESS as applicable) in advance by Demand Draft in favor of ‘Bosch Rexroth (India) Ltd.’, Payable at
Ahmedabad, must be forwarded at least two weeks in advance and confirmation of registration obtained
ten days before the start of the course. The acknowledged confirmation-slip will have to be produced by
the participant at the time of joining the program.
< We reserve the right to prepone/postpone/cancel any of the programs, and also to transfer the registration
of candidates to another program, for which intimation will be given one week in advance to the candidates
to whom written confirmation has been given.
< During correspondence for training kindly send us your “address for invoicing” as well as “address for
correspondence” separately with all contact telephone and fax numbers.
< Kindly provide following details without fail, once training programme/participation by any of your
candidates is finalized.
Your company’s TIN No./ Date
Your company’s C.S.T.No./ Date
Your company’s TAN No./ Date
Your company’s PAN No./ Date
34
Electric Drives Linear Motion and
and Controls Hydraulics Assembly Technologies Pneumatics Service
Registration/Confirmation (Use seperate form for each participant. Photocopies can be used)
Course Selection:
£ IH : Industrial Hydraulics £ IND1 : Basic concepts of Single axis
IndraDrive & HMI
£ CCH : Continuous Control Hydraulics £ IND2 : Basic concepts of Multi axis
IndraDrive MLD-M & HMI
£ HCCM : Hydraulic Contamination Control & Maintenance £ PLC : Basic concepts of PLC & HMI
£ MH : Mobile Hydraulics
£ HP : Hydraulics and Pneumatics for students
£ SP (Please mention the no. of the course)
Course duration: From to Venue: £ Ahmedabad / £ Bangalore
Confirmation of Registration:
M/s.
We confirm registration of
in the Hydraulic Training Program from to
Please report between 09.30AM to 09.45AM at Training Centre, Bosch Rexroth (India) Ltd., Ahmedabad /
Bangalore.
S.G. Kelshikar
35
General Manager-SVH
Training Calendar 2010
Automobiles
Educational Institutes
General Engineering
37
Training Calendar 2010
Mobile Equipment
Ports
38
Training Calendar 2010
Power Genaration
Rubber
39
Training Calendar 2010
40
Training Calendar 2010
Ahmedabad City
Not to Scale
To Mahesana
N
Jagatpur
Cherpur
Gujarat
Kali Stadium
Gota
Kotarpur
Sabarmati Hansol
Ranip
Chandalodia Sardar Nagar
Sabarmati
Sola
r KuberNagar
New Wadaj
r i ve
ati
Camp
Hanuman
Sabarmati rm Naroda
Ghatalodia Asharam ba
Silaj
Naranpura Sa Circuit
House
Memnagar Krishna
Hatheesing Nagar Kathwada
Tample
Gujarat Vidyapeeth Dudheswar
Thaltej
Asarwa
Kasurba Gandhi Rd.
Bodakdav
Gujarat University High Court Nikol
Vastrapur CPO Daripur
PRI Gandhigram Saraspur
Satellite Lal Darwaja Shastri Stadium
Gujarat Gandhi Marg
IIM AHMEDABAD Odhav
Collage Town Hall
RakhialRoad Odhav Road
Ambli Old City
Ambawadi Muscum
Gomtipur
S. T. Bus Stand Ram Rajya Nagar Singarava
N.I.D. Zoo Shaking Minarates
Jodhpur Paldi
Kankaria Lake Satyamnagar
Vasna Balvatika
Vejalpur Amraiwadi
L. G. Hospital Khokhara
Shah Alam Mahemdabad
Maninagar C. T. C.M Vastral
Makarba Chandola
iv er Lake Ghodasar
a ti r Isanpur
Sarkhaj a rm
S ab Ramol
Gyaspur
Shahwadi
Gopalpur
Narol
Pipalaj
Vatva Vindol
Barejadi
Lambha
Asalali
To Vadodara
41
For reaching our Training Centre,
Bangalore city map for your reference
Ahmedabad
Near Vatva Railway Station,
Vatva, Ahmedabad - 382 445
Phone : +91 (0)79 6613 2388
Fax : +91 (0)79 6613 2423
Bangalore
Plot 96, Phase lll,
Peenya Industrial Area,
Bangalore - 560 058
Phone : +91 (0) 80 4117 0211
Fax : +91 (0) 80 2839 4021
Delhi
S-10, Green Park Extension,
Production
Near Uphaar Cinema,
New Delhi - 110 016 Sales Office
Phone : +91 (0) 11 2656 6525
Training center
Fax : +91 (0) 11 2656 6887
Service center
Jamshedpur
System Integrator
10, Circuit House Area (North), / sales partners-
Road No.5, Jamshedpur - 831 001 Not shown-
more than 46
Phone : +91 (0) 657 2222957
Fax : +91 (0) 657 2220398
Kolkata
Merlin Surabhi, 2nd Floor,
8/1/2 Loudon Street
(Dr.U.N. Brahmachari Street),
Kolkata - 700 017
Phone : +91 (0) 33 4002 0175
Fax : +91 (0) 33 4002 0199
Mumbai
Advance House, 2nd Floor,
Marol Naka, Makwana Road,
Andheri (East), Mumbai - 400 059
Phone : +91 (0) 22 2856 3290 / 2856 3291
Fax : +91 (0) 22 2856 3293 / 4
Pune
18/4 & 19/4, Hadapsar Industrial Estate
Pune - 411 013.
Phone : +91 (0) 20 2681 3841 / 42
Fax : +91 (0) 20 2681 3844
43
Bosch Rexroth (India) Ltd.
Near Vatva Railway Station
Vatva
Ahmedabad - 382 445, India
www.boschrexroth.co.in
44