Documente Academic
Documente Profesional
Documente Cultură
Local Area connection Configuration using netsh utility and IP static routing in
Windows command line
Prepared By
Vignesh Ramachandran
Engineer – Server Management
Email ID:‐ vignesh.ramachandran@wipro.com
Command to Configure IP address, WINS address and DNS address to the interface Named NIC
(Default name is Local Area Connection)
Syntax:
netsh interface ip set address name=”<NIC card Name>” source=<static> or <dhcp> <Ip address>
<subnetmask> <gateway> <metric value>
Configuring Static IP
netsh interface ip set address NIC static 192.168.1.197 255.255.255.0 192.168.1.1 1
or
netsh interface ip set address name= NIC source=static addr=192.168.1.197 mask=255.255.255.0
gateway=192.168.1.1 gwmetric=1
Configuring DHCP
netsh interface ip set address NIC dhcp
or
netsh interface ip set address name=NIC source=dhcp
Configuring Primary DNS Address
netsh interface ip set dns name= NIC source=static addr=192.168.1.254 primary
Or
netsh interface ip set dns NIC static 192.168.1.254 primary
Obtain DNS address automatically
netsh interface ip set dns name= NIC source=dhcp
Or
netsh interface ip set dns NIC dhcp
Configuring WINS Address
netsh interface ip set wins name= NIC source=static addr=192.168.1.254
Or
netsh interface ip set wins NIC static 192.168.1.254
Obtain WINS address automatically
netsh interface ip set wins name= NIC source=dhcp
Or
netsh interface ip set wins NIC dhcp
Static IP Route
Adding a IP route
Syntax:
Route add <destination n/w> mask <destination n/w subnet mask> <gateway IP> metric <integer value>
if <interface number>
route add 192.168.2.0 mask 255.255.255.0 192.168.1.2 metric 3 if 1
Displaying the route table
route print
Changing the IP route
route change 192.168.2.0 mask 255.255.255.0 192.168.1.3 metric 2 if 1
Deleting the IP route
route delete 192.168.2.0