0 evaluări0% au considerat acest document util (0 voturi)
13 vizualizări1 pagină
To zero your M14 / M1A with a 250 meter battle zero: 1) Locate this target 25 meters downrange 2) Aim at the center of the black dots 3) Adjust sights. 4) Loosen the sight adjustment screw and rotate the elevation drum without moving the rear sight until the 250 meter mark is lined up with the index mark. Tighten the screw.
To zero your M14 / M1A with a 250 meter battle zero: 1) Locate this target 25 meters downrange 2) Aim at the center of the black dots 3) Adjust sights. 4) Loosen the sight adjustment screw and rotate the elevation drum without moving the rear sight until the 250 meter mark is lined up with the index mark. Tighten the screw.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca PDF, TXT sau citiți online pe Scribd
To zero your M14 / M1A with a 250 meter battle zero: 1) Locate this target 25 meters downrange 2) Aim at the center of the black dots 3) Adjust sights. 4) Loosen the sight adjustment screw and rotate the elevation drum without moving the rear sight until the 250 meter mark is lined up with the index mark. Tighten the screw.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca PDF, TXT sau citiți online pe Scribd
To zero your M14 / M1A with a 250 meter battle zero:
1) Locate this target 25 meters downrange
2) Aim at the center of the black dots 3) Adjust sights and repeat step 2 until groups are on the line, directly above the center of the dots. 4) Loosen the sight adjustment screw and carefully rotate the elevation drum without moving the rear sight until the 250 meter mark (the line between the 200 and 400 meter lines) is lined up with the index mark. Tighten the screw.