Documente Academic
Documente Profesional
Documente Cultură
LNB with Rubber gasket and 4 x screws BUC with Rubber gasket and 4 x screws Co-Pol Feed horn
Tools Required:
1 x 7mm flat spanner
1 x Allen Key (provided)
1 x Philips (Star) Screwdriver
1 x Pliers
Connect the LNB and BUC to the Feed horn as shown using 4 supplied screws on each item
supplied, ensure the rectangular holes are aligned. Remember to insert the rubber gasket in the
groove on the LNB and BUC. If you cannot use the Allen key or screwdriver, you may need to cut the
Allen key to allow you to tighten the screws.
Completed Feed
Horn Assembly