Documente Academic
Documente Profesional
Documente Cultură
I) Preliminary Design Report consists of Max. 9 Pages. Teams are required to fill these 9 pages with max. word limit
of 500 per page.
. Page 1) Rule book – all important parameters to be captured in one page in brief
This should broadly cover important dimensions of the vehicle, wheel base, track widths, approx weight
distribution, sub system specs such as - engine , transmission, brakes, steering, suspension , tyres etc
Teams are expected to provide target specs such as speed, gradability, acceleration, braking performance,
turning circle, ground clearance, suspension parameters, wheel geometry etc based on which the teams would
take up the detailed design.
This must cover all design considerations such as driver ergonomics, intended placement of the aggregates,
rule book conformance parameters to be highlighted, load values and locations of loads applied for various
analysis, stress/deformation, impact factors considered for various simulation tests and results, roll cage
material and section finalized, 3D view, weight of the roll cage, number of weld joints and total weld length of
the basic roll cage, estimated cost of manufacturing.
II) Teams can attach max. of 4 Images per Page. Upload Image and attach it to desired place.
III) Teams shall have to Save each page Separately by Clicking Save Page Button at the bottom of each page.