Documente Academic
Documente Profesional
Documente Cultură
Notice: The default NE ID is 3,or 4. when commissioning links, We must modify NE ID as designed.But no need modify Ext
different sites with unique NE ID.
1+1 Protection
NE Time Synchronization
Notice: When commissioning links, we usually select "NM" as Synchronous Mode. It means NE time will be isochronous with N
laptop which we used for configurature. When NMS system installed in OMC, all NEs should synchronize with this system.
NE Clock Setting
Notice: Create an external clock source. First priority source must be on the top. There is a rule : all Nes should trace BSC cloc
Notice: Set modulation as required in design file. If there is 1+1 link and you already config protection group, then only set "R
board, the other board will be automatically change work mode as same as working board.
Notice: Set Transmit Frequency as same as design doc.T/R data is "0" means it'll recognise T/R spacing from ODU hardware p
cinfig T/R Spacing.
Power Attributes
l 3.Equipment information
l 4.Advanced attributes
Notice: Set the tranmission power according design. Query "Actual Receive Power" to inspect quality of link.
Advanced Attributes
Notice: Query "Actual Transmission Status" of ODUs, working ODU should be unmute, and Protection ODU shoud be mute.(
Service Configuration
Notice: According design there should be services configured.
NE Performance Monitor
Notice: First click the item and check the Monitor time is started or not. Before start monitoring, ensure NE already synchron
function will be failed.
ECC Management
Notice: Each NE should be configured as "Auto mode".