Documente Academic
Documente Profesional
Documente Cultură
com
Put this information in the glove box with the vehicle owner's manual.
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. All 30220 (0509) 08P13-SNA-1000-91 1 of 3
1. Slide the driver’s seat all the way back. 4. Install the driver’s side rubber mat by placing the
rings in the rubber mat over the anchor pins.
2. Under the front of the driver’s seat cushion,
extend the slits in the floor carpet with a utility
knife (two places). PASSENGER’S SIDE
RUBBER MAT
UTILITY
KNIFE
FLOOR SLIT
CARPET
SQUARE
HOLE DRIVER’S SIDE
RUBBER MAT
PIN
RING
5311040S
RUBBER MAT
ANCHOR
5311010S
5311050S
2 of 3 All 30220 (0509) © 2005 American Honda Motor Co., Inc. - All Rights Reserved.
2-Door
• Using a utility knife, cut the rear rubber mat
along the cut line.
REAR
RUBBER MAT
UTILITY
KNIFE
5404050S
REAR
RUBBER MAT
ANCHOR
PIN
RING
5404061S
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. All 30220 (0509) 3 of 3