Documente Academic
Documente Profesional
Documente Cultură
for Iran’s Code of Practices (AP1384‐AD2005 Edition)
UBC 94 Seismic AutoLateral Load Parameters
Prepared for ISEA™, by V. Sarmast, Dey AP1384, December AD2005
Use “User Coefficient” for “Auto Lateral Load” in “Define Static Load Case Names” dialog box.
Use these parameters:
• Base Shear Coefficient,
(from Code)
• Building Height Exp., 1
Use UBC 94 for Auto Lateral Load in Define Static Load Case Names dialog box.
Use these parameters:
• Time Period: User Defined, (from Code)
Note: For 1.85, must control that 0.1 . If it’s not satisfied, the multiplier value of may be increased.
UBC 94 Factors for Approximate and Program Calculated Methods
Prepared for ISEA™, by V. Sarmast, Tir AP1385, July AD2006
(in feet)
Structural System (in metres) Empirical Method (Method A)* Program Calculated Method**
Not Increased 25% Increased Zone 4 Zone 1, 2, or 3
Steel Moment Resisting Frames 0.08 0.0328 0.0410 0.0316 0.0293
Concrete Moment Resisting Frames 0.07 0.0287 0.0359 0.0276 0.0256
Other Structural Systems 0.05 0.0205 0.0256 0.0197 0.0183
** min ,
Where
1.3, 0.35 Zone 4
and
1.4, 0.30 Zone 1, 2, or 3
Last Update Tir AP1387, July AD2008
Copyright © 2005–2008 Caevandish
All rights reserved.