0 evaluări0% au considerat acest document util (0 voturi)
18 vizualizări1 pagină
The Cable Distribution Spool is designed for use with the double-sided vertical rack cabling section, Part Number 11729-xxx. The spools promote a gradual bend radius to comply with the ANSI / TIA / EIA-568-a bend requirements (4X the cable diameter) they route all types of cable - from copper to fiber - to provide slack management and to help route from horizontal to vertical or vice versa.
The Cable Distribution Spool is designed for use with the double-sided vertical rack cabling section, Part Number 11729-xxx. The spools promote a gradual bend radius to comply with the ANSI / TIA / EIA-568-a bend requirements (4X the cable diameter) they route all types of cable - from copper to fiber - to provide slack management and to help route from horizontal to vertical or vice versa.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca PDF, TXT sau citiți online pe Scribd
The Cable Distribution Spool is designed for use with the double-sided vertical rack cabling section, Part Number 11729-xxx. The spools promote a gradual bend radius to comply with the ANSI / TIA / EIA-568-a bend requirements (4X the cable diameter) they route all types of cable - from copper to fiber - to provide slack management and to help route from horizontal to vertical or vice versa.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca PDF, TXT sau citiți online pe Scribd
● Made of high-impact, flame The Cable Distribution Spool is
retardant composite material. designed for use with the double-sided (6" wide) vertical rack cabling section, ● 5.9” deep x 2.75” diam. part number 11729-xxx. CPI Cable Distribution Spool. Distribution Spools promote a gradual bend radius to comply with the ● Mounts to ports in double- ANSI/TIA/EIA-568-A bend require- sided cabling section or can ments (4X the cable diameter). They be wall-mounted. route all types of cable – from copper to fiber – to provide slack manage- ● Large obround flange fea- ment and to help route from horizontal ture for extra cable capacity. to vertical or vice-versa.
● Offered in black or white The Cable Distribution Spool is 5.9"
finish. long and 2.75" in diameter, and is made of a high impact, flame retardant com- posite material. The spools are attached to the vertical cabling section by mounting the supplied adapter into one of the holes in the center of the An Employee Owned Corporation rack (after removing the grommet). The spools are then easily attached to the screw heads on either side of the adapter. Or, they may all be used on one side of the section. Alternatively, the spools can be attached virtually anywhere by inserting the proper screw through the center spool hole.