Documente Academic
Documente Profesional
Documente Cultură
Ans :>
The special feature of screw thread micrometer is that it has a
wedge shaped anvil and a complimentary wedge shaped spindle. The
angle of the wedge is the same as the angle of the thread profile to be
measured, i.e. 55° for BSW and 60° for metric. The anvil of this type of
micrometer can be moved sideways by means of a screw.
The screw thread micrometer measures the effective diameter of a
thread.
D en o tin g
d ia m te o
r f th eb e sts iz e w ireb y db
P α
d b = sec
2 2
P α α P α
N o w ,E = M - sec cosec + 1 + cot
2 2 2 2 2
α α
1 + sin cos
P 2 + 2
= M-
α
2 sin ⋅ cos α α
sin
2 2 2
α α
1 + sin + cos
P 2 2
= M- ⋅
2 sinα ⋅ cosα
2 2
P α α α
⇒ E = M − 1 + cosec 2 sec − tan
2 2 2 2
Compression correction :
In the three wire method, the micrometer exerts some force on
the wires while measuring the total diameter of the system consisting
if the wire and the thread. Due to this force some compression occurs
in the wires and to correct the error due to this, we need to add some
correction factor called ‘compression correction factor’.
This correction can be formulated as:
A 23
e = 0.001 −
E 13
Ans :>
• Two wire method :
1. The two wire method the job is carried in the
floating carriage measuring machine with
fiducial indicator.
2. Only a single diameter can be measured.
: SAMPLE CALCULATION: