Documente Academic
Documente Profesional
Documente Cultură
6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445 (2)MOUNTING
www . quoizel . com SCREWS 1 . Before beginning the installation , carefully unpack and identify all parts , referring
UNIVERSAL
to the illustration.
CROSSBAR
( 2)OUTLET BOX SCREWS 2 . Turn the electrical power to installation point OFF at the circuit breaker .
SUPPLY WIRE and
GROUND WIRE 3.Locate NIPPLE with HEX NUT. Thread beaded end of NIPPLE into HEX COUPLING
underside of SOCKET CLUSTER. Hand tighten until snug. Locate PLAIN WASHER,
FIXTURE CANOPY SHADE, SHADE STOP over end of NIPPLE in turn, secure them by threading HEX
( 2)MOUNTING BALLS NUT onto the end of NIPPLE and tighten until snug. Locate CAP over end of NIPPLE,
thread HEX NUT onto the end of NIPPLE to secure it. Hand tighten until snug. Proceed
to thread FINIAL onto the end of NIPPLE and tighten until snug.
4 . Locate the ( 2 ) MOUNTING SCREWS and thread them into the back of the
UNIVERSAL CROSSBAR , making sure that they match the holes in the FIXTURE
PAN . Using ( 2 ) OUTLET BOX SCREWS ( not supplied ) , fasten the UNIVERSAL
CROSSBAR to the OUTLET BOX .
6 . Carefully tuck all of the wiring up into the outlet box and fit the FIXTURE PAN
over the MOUNTING SCREWS . Secure the FIXTURE PAN to the ceiling with the
( 2 ) MOUNTING BALLS , making sure that the balls are fully threaded onto the
MOUNTING SCREWS before tightening .
7 . Install bulbs referring to fixture markings and / or labels for maximum wattage .
SHADE
8. Restore power to installation point ON . Retain this sheet for future reference .
SHADE STOP
HEX NUT
CAP
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
HEX NUT CONSULT A LICENSED ELECTRICIAN!
FINIAL
IS-VESL1716
2006-10-26