Sunteți pe pagina 1din 5

Investigating the effect of minerals on plant

growth
Introduction
All of these techniques involve a long-term project – prepared in one lesson, left for about a
month (see note 2), then with results gathered in one or more lessons after that time. There is
scope for focus on the scientific methods involved in planning, controlling variables, collecting and
analysing data, as well as on the biology of plant nutrient requirements. The methods include
several different dependent variables – percentage cover, harvested mass, dry mass, turbidity,
population count with haemocytometer. Each method produces a qualitative outcome as well.

Lesson Organisation
In the first lesson, present the biological problem – how to investigate the effects of different
minerals on plant growth. Give each group of students a different option for following plant growth
and ask each group to plan in detail how they would set up an investigation. Evaluate the
methods in terms of controlled variables, reliability, and ease of data collection. Decide which
method to work with. If you can manage the practicalities of two different investigations, choose
two.

In the next lesson, set up an investigation (or two). Get all students involved – for example, if
using the radish method, each student could set up one pot of seeds, for a particular culture
medium, all seeds could be grown together and results pooled.

In the final lesson, collect the results and collate for the group – showing how to calculate means
and discussing reliability of results and validity of any conclusions drawn.

Apparatus And Chemicals


For the class – set up by technician/ teacher:

Mineral nutrient mixes, see note 1

For each group of students:

Plant material to investigate and associated materials. Choose from A, B, C or D.

A: Germinating barley
Healthy barley seedlings, approximately 6, germinated a week in advance (note 3)
test tubes (1 per culture solution)
cotton wool
aluminium foil or black card/ polythene to surround test tubes
dropping pipette
B: Radish
Seeds – 2 per container
Growing medium – peat/ vermiculite mix (note 4)
Small container (for example a film canister) with hole cut in bottom, 1 per set of seeds
Wicks – a piece of capillary matting/ cloth cut into narrow diamond shape, 1 per container
Capillary matting and water reservoirs – one per culture medium (note 5)

C: Algal culture
Algal suspension – in full mineral salts medium (note 6)
Conical flask, 1 per culture solution
Cotton wool
Syringe to dispense 1 cm3 of algal suspension
Disinfectant for syringe
Measuring cylinder, 100 cm3
Microscope
Microscope slide
Cover slip

D: Lemna (“duckweed”)
Healthy Lemna plants of similar size, 10 per culture solution
Beakers or jam jars, 1 per culture solution
Plastic film to cover the beakers or jars

Health & Safety


Read our health and safety guidelines

Technical Notes
1 Solid media to prepare Long Ashton water culture or Sach’s water culture solutions are
available from Timstar or Philip Harris (see Suppliers). It can be cheaper (and is certainly much
easier) to buy the ready-prepared nutrient solutions if not all the chemicals are available in-house.
But you could make up your own solutions using these recipes from CLEAPSS Recipe card 73.

Sach’s culture solution (complete recipe): Dissolve the following salts in 1 litre of distilled
water.

 0.25 g of calcium sulfate(VI)-2-water (Hazcard 19B – Low hazard)


 0.25 g of calcium phosphate(V)-2-water (CaH4(PO4)2.2H2O) (Hazcard 72 – Low hazard)
 0.25 g of magnesium sulfate(VI)-7-water (Hazcard 59B – Low hazard)
 0.08 g of sodium chloride (Hazcard 47B – Low hazard)
 0.70 g of potassium nitrate(V) (Hazcard 82 – oxidising and dangerous with some metals and
flammable substances)
 0.005 g of iron(III) chloride-6-water (Hazcard 55C – harmful as a solid)
For Sach’s culture solution with mineral deficiencies, make the following changes.

 Deficient in calcium: 0.2 g of potassium sulfate(VI) (Hazcard 98B – low hazard) replaces calcium
sulfate(VI)-2-water and 0.71 g of sodium dihydrogenphosphate(V)-2-water replaces calcium
phosphate(V). (Hazcard 72 – low hazard.)
 Deficient in iron: Omit iron(III) chloride-6-water.
 Deficient in nitrogen: 0.52 g of potassium chloride (Hazcard 47B – low hazard) replaces
potassium nitrate(V).
 Deficient in phosphorus: 0.16 g of calcium nitrate(V)-4-water (Hazcard 19A – oxidising and
irritant) replaces calcium phosphate(V).
 Deficient in sulphur: 0.16 g of calcium chloride (Hazcard 19A – irritant as solid) replaces calcium
sulfate(VI) and 0.21 g of magnesium chloride-6-water (Hazcard 59B – low hazard) replaces
magnesium sulfate(VI).
 Deficient in magnesium: 0.17 g of potassium sulfate(VI) (Hazcard 98B – low hazard) replaces
magnesium sulfate(VI).
 Deficient in potassium: 0.59 g of sodium nitrate(V) (Hazcard 82 – oxidising and harmful as solid
and dangerous with some metals and flammable materials) replaces potassium nitrate(V).
2 Each system requires a different lead-in time, a different length of time for results to develop
and a different method for measuring the effects.

Plants used Lead-in time Development time Collecting results

A: Germinating Moisten seeds to Results can be Observe the growth.


barley germinate about a collected in about 3 Measure the mass of the
week before use – in a weeks seedling. Dry in a low oven
layer of damp (80-90 °C) until dry mass is
vermiculite in a constant.
margarine tub (or on
wet OASIS). (Note 3)

B: Radish – from No preparation of 18-21 days if grown Observe the growth.


seed seeds required under a light bank for Measure the mass of radish,
24 hour light. Longer and then dry in a low oven
if illuminated (at 80-90 °C) until dry mass
normally. (See note is constant.
5.)

C: Algal culture, Culture about a litre Results can be Compare turbidity by eye.
e.g.Scenedesmus of algal suspension collected at any time Measure turbidity with a
quadricauda for about 4 weeks in from 1 to 4 weeks – colorimeter, or estimate
advance (See note 6.) or over a longer population of alga using a
investigation period. microscope and
haemocytometer.

D: Duckweed Collect healthy plants 4-8 weeks to achieve Make notes of any
(Lemna) from a pond. Only distinct results. differences in colour or
possible at a time of other qualities of growth –
the year when such as root length. Estimate
duckweed is area covered on surface of
available! water in container.

3 If you germinate barley seeds on cotton wool or blotting paper, the roots may stick in the damp
medium. Using OASIS or vermiculite avoids this – although it costs a little more. Refresh the
mineral solution every couple of days by tipping out and replacing. Aerating the solution before
applying to the roots may improve the general uptake of solution and reduce the risk of the barley
seedlings rotting.

4 The peat/ vermiculite mix must be low in nutrients – for example a seed compost, rather than
multipurpose (which has added nutrients).

5 Water reservoirs and wicks: Set up a series of ice-cream containers containing each culture
medium to be tested. Cut slots in the lids of the containers. Cut pieces of capillary matting as
shown in diagram. Insert the capillary matting and pour enough culture medium into the ice-
cream container to ensure that the matting remains moist at all times.

Place the wicks in the bottom of the small containers before filling (to within 5 mm of the top) with
growing medium. Add 2 seeds to each container. Add 2-3 mm more growing medium and firm
gently. Place the container on the capillary matting so that the wick can draw liquid mineral salts
medium from the container.

6 Inoculate 500 cm3 of complete medium with Scenedesmus quadricaudus or Micrasterias


thomasiana var. notata or Chlorella – about one week before required. Aerate continuously using
a filter pump, or aquarium airstone and pump and keep in a light place or illuminate 24 hours a
day. Sciento and Blades Biological provide suitable algae to culture. Do not use algae cultured on
agar slopes.

Procedure
SAFETY: Follow good hygiene practice after handling pond water or plants removed from ponds.

Preparation:

If using barley seedlings, germinate about one week before use.


If using algal suspension, start culturing alga about 4 weeks before use.

Method A and B:

a Set up the plants (barley in liquid culture solution, or radish watered with culture solution) and
allow to grow for about 3 weeks (for radish with 24 hour illumination or for barley).

b After 3 weeks, make qualitative observations of plant growth in each medium.

c Collect sample plant material, remove any adhering growth medium (radish) or blot off any
liquid (barley). Measure the mass of the living material.
d Place the material in an oven at 80 – 90 °C to dry. Measure the mass every day until 3 readings
are constant.

e Record the dry mass of plant material in each culture medium.

Method C:

f Observe the algal suspension by eye and make qualitative observations of which has grown
best.

g Measure the turbidity of each sample using a colorimeter.

h Estimate the population of algae using a microscope and a small grid square, or a
haemocytometer.

Method D:

i Make qualitative observations of the growth of each sample.

j Estimate the area of cover in each beaker/ jar by placing a grid underneath and counting the
number of squares covered.

Teaching Notes
In summary, any mineral deficiency will result in poor plant growth. It may be difficult for
inexperienced botanists/ horticulturists to appreciate the subtle differences between one kind of
poor growth and the next. Overall productivity is a simple measure of growth. You could also
measure the total height (or length) of a plant leaf or stem (radish/ barley), and note the colour,
and the pattern of loss of colour. Several deficiencies result in death of leaf tissue – so you may
also notice different patterns of damage to the leaves. It is worth identifying veins and leaf
margins and noting any changes in those areas.

Calcium deficiency shows in soft, dead, necrotic tissue at rapidly growing areas – such as on
fruits, the tips of leaves and the heart of crops such as celery. If the margins of the leaves grow
more slowly, the leaf tends to cup downwards. Calcium deficiency also leaves plants with a
greater tendency to wilt than non-stressed plants.

Iron deficiency shows in strong chlorosis at the base of leaves – leading to completely bleached
leaves. Bleached areas may develop necrotic spots.

Nitrogen deficiency results in generally poor growth – short, spindly plants – and general
chlorosis (lack of chlorophyll). Plants show more tendency to wilt under water stress and die more
quickly. Young leaves at the growing point may still be green but will be small. Other leaves may
lack colour entirely. In some plants, the underside of the leaves, the petioles and midribs may
develop a purple colour.

Phosphorus deficiency produces dwarfed or stunted plants – perhaps with some necrotic spots
on the leaves. They grow more slowly than similar plants that are not lacking phosphorus.

Sulfur deficiency shows in an overall chlorosis with veins and petioles gaining a reddish
colouration. This includes young leaves. Leaves may be twisted and brittle.

Magnesium is an essential part of the chlorophyll molecule. Plants deficient in magnesium


frequently show interveinal chlorosis (a lack of chlorophyll).

Potassium deficiency shows first in marginal chlorosis (loss of colour at the tips of the leaves).
As this progresses, the leaves may curl and crinkle. Potassium is required for formation of healthy
flowers and fruit (beyond the timescale of this investigation).

S-ar putea să vă placă și