0 evaluări0% au considerat acest document util (0 voturi)
77 vizualizări6 pagini
Composite INSULATORS ore made by molding the weothersheds and housing directly onto the core and metal end fittings in a single step. The bond assuresthat even under high pressure water washing the interface of the insulator - the metal fitting / covering material -to be as strong as the polymer itself. The fibergl.assrod core remains encapsulated and protected from any ingression for a long termmechanical performance.
Composite INSULATORS ore made by molding the weothersheds and housing directly onto the core and metal end fittings in a single step. The bond assuresthat even under high pressure water washing the interface of the insulator - the metal fitting / covering material -to be as strong as the polymer itself. The fibergl.assrod core remains encapsulated and protected from any ingression for a long termmechanical performance.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca PDF, TXT sau citiți online pe Scribd
Composite INSULATORS ore made by molding the weothersheds and housing directly onto the core and metal end fittings in a single step. The bond assuresthat even under high pressure water washing the interface of the insulator - the metal fitting / covering material -to be as strong as the polymer itself. The fibergl.assrod core remains encapsulated and protected from any ingression for a long termmechanical performance.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca PDF, TXT sau citiți online pe Scribd
tl SEDIVER tl
SEDIVER COMPOSITE SUSPENSION INSULATORS :
an impenetrable design
a)
ySEDIVER COMPOSITE SUSPENSION INSULATORS
an impenetrable design
IMPENETRABLE DESIGN :
By moulding the weathersheds directly onto the core and over the end fittings under
Pressure and high temperature, SEDIVER created the unique complete composite insulator
that is impenetrable to humicity and moisture.
This perfect bond assures that even under high pressure water washing the sole interface
of the insulator - the metal fiting/covering material - to be as strong as the polymer
itself. The fiberglass rod core remains encapsulated and protected from any ingression
{or a long tem mechanical perfomance.
Sexier sce ol e-arcomposie ravctos ow
“made by molding he westhesheds ord housing
drecty ono the core and metal end fing ino
sing ip, The resus on imeneable dion
‘hat gies uate protecon forthe coe.
High srengh, op foergoss cores
‘ompley ected Fom he elements cle
its length by a jointless, seamless, molded
rubber housing.
= Voltage application
1SKV Up 10 765 kV
= Mechanical strength
AOKN up fo 600 EN
“Tiree diferent shed profies
giving necessary’
Teckage distance to
‘answer pollution
conditions
= Two types of covering
materials :
~ ARMOURSILg Slicone
rubber which minimises
leckage current and prevents
arcing even in very polluted and salt water
environments,
= ARMOURLITEg EPDM rubber which has proven
ils efficiency over a wide range of climates,
contamination level and line voltage since 1975.SEDIVER ARMOURSIL @
COMPOSITE SUSPENSION INSULATORS
‘most curantrequremants*
sorrzs kv
rszpasky
s0/r7O KW
Bes za a8
Rose 1m ca os 5
Ending yee Speciied —Shedprofie Numberofshecs Molec
‘mectaricl oad Designation
ini
SferSocket " Strsiconenober
BforBal wt Fler POM ber
Yior¥ Cvs a
Ter Tongue
Clorcews
EforOval je
“For epplcation beyond the rongeIsed het, please contact us for deta.