Documente Academic
Documente Profesional
Documente Cultură
Construct a power amplifier, which conducts the 360 degree of input signal, and determine power efficiency, frequency response curve 2. Design and construct an audio frequency amplifier for the given specifications VCC= 15V, RS=600 , RL=120K , fL=100HZ and BETA= 100 using BJT and plot the frequency response curve.
3. Design and construct an emitter follower for the given specifications VCC=15V, RS=600 , RL=120 , BETA=100, fL=100HZ, VIN=100 mv. And plot the frequency response
4. Construct a very large current gain amplifier and determine the frequency response, input impedance.
5. Design and construct a base bias circuit for a given specification s VCC=18V, VCE=9.9V, IC=3.68 mA and hfe=100 and plot the frequency response curve.
6. Construct a differential amplifier using BJT and calculate the common mode rejection ratio.
7. Construct a power supply circuit using a full wave rectifier with filter and find out the load regulation.
8. Design a half wave rectifier with, without filter and calculate the ripple factor
9. Design a power supply circuit using a half wave rectifier with filter and find out the load regulation
10.Design a full wave rectifier with, without filter and calculate the ripple factor
11.Design and construct a high voltage gain BJT amplifier using self bias for the given specifications VCC= 15V, RS=600 , RL=120K , BETA= 100 , fL=100HZ and plot the frequency response curve?
12.Design and construct a BJT voltage source amplifier using voltage divider bias for the given specifications VCC=15V, RS=600 , RL=120 , BETA=100, fL=100HZ, VIN=100 mv. And determine the frequency response.
13.Construct a emitter coupled pair amplifier and plot the frequency response curve.
14.Construct a two CC stage driver circuit, determine the frequency response and input impedance.
15.Design and construct a BJT voltage gain amplifier using SELF bias for the given specifications VCC=15V, RS=600 , RL=120 , BETA=100, FL=100HZ, VIN=100 mv. And determine the frequency response
16.Design and construct a high voltage gain BJT amplifier using potential divider bias for the given specifications VCC= 15V, RS=600 , RL=120K , BETA= 100 and plot the frequency response curve?
17.Construct a source follower with bootstrapping and plot the frequency response.
18.Construct a class B amplifier which avoids the cross over distortion and find power efficiency.