Documente Academic
Documente Profesional
Documente Cultură
DM54LS373/DM74LS373, DM54LS374/DM74LS374
May 1992
DM54LS373/DM74LS373,
DM54LS374/DM74LS374
TRI-STATEÉ Octal D-Type Transparent
Latches and Edge-Triggered Flip-Flops
General Description Features
These 8-bit registers feature totem-pole TRI-STATE outputs Y Choice of 8 latches or 8 D-type flip-flops in a single
designed specifically for driving highly-capacitive or relative- package
ly low-impedance loads. The high-impedance state and in- Y TRI-STATE bus-driving outputs
creased high-logic level drive provide these registers with Y Full parallel-access for loading
the capability of being connected directly to and driving the Y Buffered control inputs
bus lines in a bus-organized system without need for inter- Y P-N-P inputs reduce D-C loading on data lines
face or pull-up components. They are particularly attractive
for implementing buffer registers, I/O ports, bidirectional
bus drivers, and working registers. (Continued)
Connection Diagrams
Dual-In-Line Packages
’LS373
Order Number
DM54LS373J,
DM54LS373W,
DM74LS373N or
DM74LS373WM
See NS Package Number
J20A, M20B, N20A or
W20A
TL/F/6431 – 1
’LS374
Order Number
DM54LS374J,
DM54LS374W,
DM74LS374WM or
DM74LS374N
See NS Package Number
J20A, M20B, N20A or
W20A
TL/F/6431 – 2
Function Tables
DM54/74LS373 DM54/74LS374
H e High Level (Steady State), L e Low Level (Steady State), X e Don’t Care
u e Transition from low-to-high level, Z e High Impedance State
Q0 e The level of the output before steady-state input conditions were established.
Logic Diagrams
DM54/74LS373 DM54/74LS374
Transparent Latches Positive-Edge-Triggered Flip-Flops
TL/F/6431–3 TL/F/6431 – 4
2
Absolute Maximum Ratings (See Note)
If Military/Aerospace specified devices are required, Note: The ‘‘Absolute Maximum Ratings’’ are those values
please contact the National Semiconductor Sales beyond which the safety of the device cannot be guaran-
Office/Distributors for availability and specifications. teed. The device should not be operated at these limits. The
Supply Voltage 7V parametric values defined in the ‘‘Electrical Characteristics’’
table are not guaranteed at the absolute maximum ratings.
Input Voltage 7V
The ‘‘Recommended Operating Conditions’’ table will define
Storage Temperature Range b 65§ C to a 150§ C
the conditions for actual device operation.
Operating Free Air Temperature Range
DM54LS b 55§ C to a 125§ C
DM74LS 0§ C to a 70§ C
IOL e 12 mA DM74
0.4
VCC e Min
II Input Current @ Max VCC e Max, VI e 7V
0.1 mA
Input Voltage
IIH High Level Input Current VCC e Max, VI e 2.7V 20 mA
IIL Low Level Input Current VCC e Max, VI e 0.4V b 0.4 mA
IOZH Off-State Output Current VCC e Max, VO e 2.7V
with High Level Output VIH e Min, VIL e Max
20 mA
Voltage Applied
IOZL Off-State Output Current VCC e Max, VO e 0.4V
with Low Level Output VIH e Min, VIL e Max b 20 mA
Voltage Applied
IOS Short Circuit VCC e Max DM54 b 20 b 100
mA
Output Current (Note 2) DM74 b 50 b 225
ICC Supply Current VCC e Max, OC e 4.5V,
24 40 mA
Dn, Enable e GND
3
‘LS373 Switching Characteristics at VCC e 5V and TA e 25§ C
(See Section 1 for Test Waveforms and Output Load)
From RL e 667X
Symbol Parameter (Input) CL e 45 pF CL e 150 pF Units
To
(Output) Min Max Min Max
4
’LS374 Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Typ
Symbol Parameter Conditions Min Max Units
(Note 1)
VI Input Clamp Voltage VCC e Min, II e b18 mA b 1.5 V
VOH High Level Output Voltage VCC e Min DM54 2.4 3.4
IOH e Max DM74 2.4 3.1
VIL e Max V
VIH e Min
VOL Low Level Output Voltage VCC e Min DM54 0.25 0.4
IOL e Max DM74 0.35 0.5
VIL e Max
VIH e Min V
IOL e 12 mA DM74
0.25 0.4
VCC e Min
II Input Current @ Max VCC e Max, VI e 7V
0.1 mA
Input Voltage
IIH High Level Input Current VCC e Max, VI e 2.7V 20 mA
IIL Low Level Input Current VCC e Max, VI e 0.4V b 0.4 mA
IOZH Off-State Output VCC e Max, VO e 2.7V
Current with High VIH e Min, VIL e Max
20 mA
Level Output
Voltage Applied
IOZL Off-State Output VCC e Max, VO e 0.4V
Current with Low VIH e Min, VIL e Max b 20 mA
Level Output
Voltage Applied
IOS Short Circuit VCC e Max DM54 b 50 b 225
mA
Output Current (Note 2)
DM74 b 50 b 225
ICC Supply Current VCC e Max, Dn e GND, OC e 4.5V 27 45 mA
5
Physical Dimensions inches (millimeters)
6
Physical Dimensions inches (millimeters) (Continued)
7
DM54LS373/DM74LS373, DM54LS374/DM74LS374
TRI-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops
Physical Dimensions inches (millimeters) (Continued)
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.