Documente Academic
Documente Profesional
Documente Cultură
RC Series
K Series
B type (3505360) Kg
BASE isolators (avms) range is made keeping in mind the height requirements for different applications. These isolators cater to a wide range of applications, are non ageing, and offer consistent performance lifelong. BASE offers engineered solutions for vibration isolation through an optimum use of flexibility and damping. The desired flexibility can be achieved using Helical Steel Springs or Elastomers or Natural Rubber and the damping from Elastic Sleeve or Highly Viscous Damping medium depending on case. BASE mounts work both ways - isolating equipments that would spread vibrations to surrounding or isolating a precision equipment to be installed in a high vibration zone.
C type (9002800) Kg
E type (800020000)
J type (125450) Kg
Levelling Attachment
Vibration isolators are important devices designed to decrease the effects and consequences of shock and vibration. A well-made system usually has two parts: a spring that is aimed to support the load and a damping element to disperse input energy. It works as a mechanical filter, and its efficiency typically changes with frequency. Additionally, the effectiveness of vibration isolation is also reliant on the isolation system's natural frequency, or the frequency at which the system will vibrate. For intense shock and vibration, the coil spring isolators are very useful because this kind of isolator isn't influenced by intense temperature and can withstand the assault of oils, chemicals, solvents, and many others.
P type (480058000)
R type (2001000) Kg
Vibration isolation efficiency >90%. Adequate damping for minimum amplitudes. Maintenance-free, life long consistent performance. High efficiency isolation of even very low frequencies. Highly cost effective.
T type (150800) Kg