Sunteți pe pagina 1din 1

BMW Group - WebTIS Page 1 of 1

51 47 000 Removing and installing/replacing


the front (inside) left or right rocker
panel strip

Caution!
Risk of breakage to connecting lug on B-pillar
trim panel. Do not raise entrance cover strip (1)
over entire length simultaneously.

Raise entrance cover strip (1) from front to rear and


detach with clips (2) from floor plate.
Detach entrance cover strip (1) from B-pillar trim
panel at bottom towards front.
If necessary, lift clips off floor plate.

Installation:
If necessary, replace defective clips (1).
Connecting lug (3) of entrance cover strip (2)
must not be damaged.

http://na-prod.bmw-serviceweb.de/NA/webtis/show_doc/doc.html?infoobj_id=1057478 1/1/2004

S-ar putea să vă placă și