Documente Academic
Documente Profesional
Documente Cultură
Installation:
If necessary, make a note of number of shims on
screws (2) and (3) and refit them during installation
at same position.
Tighten screw (3) first.
Tightening torque 51 71 2AZ.
Vertical adjustment,
refer to Gap dimensions, body.
Installation:
Threads (1) on rear spoiler (3) must not be
damaged.
If necessary, replace faulty tapes (2) (dual-lock
tape).
http://na-prod.bmw-serviceweb.de/NA/webtis/show_doc/doc.html?infoobj_id=1057513 1/1/2004