Documente Academic
Documente Profesional
Documente Cultură
Model LPX
LOW PROFILE MINI DISK LOAD CELL 25, 50, 100, 250, 500, 1000kg 2.5, 5, 10, 25, 50t
APPLICATIONS
Low profile platforms Hoppers & tank weighing Process weighing Hostile environments Industrial weighing Mini disk applications
FEATURES
Miniature compression type Replaces similar low cost models Rugged tool steel construction
*25 & 50kg aluminium
Standard compression mount available Simple installation 3 year warranty Sealed to IP67 standards ISO 9001 certified manufacturing facilities
LO
AD
CE
Guarantee
RE
E YE
IP 67
http://www.pt-global.com
RS
LL
TH
Model LPX
LOW PROFILE MINI DISK LOAD CELL 25, 50, 100, 250, 500, 1000kg 2.5, 5, 10, 25, 50t
Ordering Information
Model LPX-25 LPX-50 LPX-100 LPX-250 LPX-500 LPX-1000 LPX-2500 LPX-5000 LPX-10000 LPX-25000 LPX-50000 Part Number LXM0025T000XXX LXM0050T000XXX LXM0100T000XXX LXM0250T000XXX LXM0500T000XXX LXM1000T000XXX LXM2500T000XXX LXM5000T000XXX LXM010TT000XXX LXM025TT000XXX LXM050TT000XXX
Accessories
The complete mount below is used with the LPX in compression load applications. This mount has convenient bolt holes located on both the top and bottom plates, integral side restraint is accomodated by the special restraining socket. B SQUARE
F
CABLE PROTECTOR (5t50t)
C SQUARE 4 Holes D E
D E C
C SQUARE 4 Holes D
B
B SQUARE
Cell fixing holes spaced at 90 A full range of accessories is available, please contact us for further details
Accessory Dimensions
Capacity 251000kg 2.5t 5.0t 10.0t 25.0t 50.0t A 55 58 76 81 100 115 B 100 100 125 125 150 180 C 65 65 100 100 115 135 D 14 14 14 14 17 17 E F 11.5 11.5 11.5 11.5 15 15 15 15 24 16 31 16
Specifications
Nominal capacity __________________ Nominal output at capacity _________ Factory calibration mode ___________ Linearity error ____________________ Repeatability ______________________ Zero return, creep (30 mins) ________ Temperature Effect on Span/10 C ___ Temperature Effect on Zero/10 C ___ Insulation Resistance - brg. to gnd ____ Insulation Resistance - cbl. to gnd _____ Compensated temp. range __________ Output Resistance _________________ 25kg to 50000kg 2.0 mV/V 0.1% compression 0.1% 0.07% 0.07% 0.01% 0.07% >5000 M ohms >1000 M ohms -10 C to 50 C 351 ohms nominal 410 ohms nominal 100% of capacity 150% of capacity >300% of capacity 5V to 20V ac/dc 25V dc 4 or 6 conductor screened 25kg2.5t 3 Metres 4 Core 5t10t 5 Metres 6 Core 25t50t 1 0 Metres 6 Core Environmental Protection ___________ IP67 Standard Input Resistance ___________________ Service Load ______________________ Safe Load ________________________ Mechanical Failure _________________ Recommended Excitation ___________ Maximum Excitation _______________ Cable Type ______________________ Cable Length _____________________
Note: All specifications are a maximum, as a % () of full load, unless otherwise stated.
Guarantee
RE
E YE
RS
LL
http://www.pt-global.com
Due to our policy of continuous development, these specifications are subject to change without notice.
TH
07/03 m