Documente Academic
Documente Profesional
Documente Cultură
Setup Manuals
Philips C-arm BV Libra / Endura / Pulsera with LASER IMAGER Products
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
Philips C-Arm
- BV family:
Libra, Endura, Pulsera
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=8300, IP=accordingly, port nbr=104, Printer Type=Kodak 8300
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=8INx10IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=2, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=0,10
n to print select Target=DryView, Print page format=2x3-6 , click Ok&Export
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=2
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=Kodak, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=190, IP=accordingly, port nbr=5040, Printer Type=Kodak 190
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=14INx17IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnif=CUBIC, Smoothing=NORMAL, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=CS435\CN0
n to print select Target=Kodak, Print page format=3x4-12 , click Ok&Export
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
iew
00 DryV
3M 87
Philips C-Arm
Fiber Cable
- BV family:
Libra, Endura, Pulsera
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=9410, IP=accordingly, port nbr=1024, Printer Type=Kodak 8700
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=14INx17IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=11, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=Pmsv3k.w87,9
n to print select Target=DryView, Print page format=3x4-12 , click Ok&Export
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5
DICOM Network
iew
00 DryV
3M 87
Philips C-Arm
Fiber Cable
- BV family:
Libra, Endura, Pulsera
Fiber Cable
Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into 9410 Local Printers
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=9410, IP=accordingly, port nbr=1024, Printer Type=Kodak 8500
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=11INx14IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=11, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=Pmsv3k.w87,9
n to print select Target=DryView, Print page format=3x4-12 , click Ok&Export
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8500, Model=8500, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8500, AE Title= 9410, Port= 1024, Max Associations= 5
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips C-Arm
- BV family:
Libra, Endura, Pulsera
Data 37-pin
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=9410, IP=accordingly, port nbr=1024, Printer Type=Kodak 8100
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=14INx17IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=11, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=Pmsv3k.w87,9
n to print select Target=DryView, Print page format=3x4-12 , click Ok&Export
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
DICOM Network
Control 9 pin
Philips C-Arm COPCIL board
- BV family: Copper Cable
Libra, Endura, Pulsera
Data 37 pin
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=9410, IP=accordingly, port nbr=1024, Printer Type=Kodak 8300
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=8INx10IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=2, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=0,10
n to print select Target=DryView, Print page format=2x3-6 , click Ok&Export
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips C-Arm
- BV family: Kodak 160 camera
Crossed
Libra, Endura, Pulsera
Network Cable
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=Kodak, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=160, IP=accordingly, port nbr=5040, Printer Type=Kodak 160
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=14INx17IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnif=CUBIC, Smoothing=NORMAL, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=CS435\CN0
n to print select Target=Kodak, Print page format=3x4-12 , click Ok&Export
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
DICOM Network
Philips C-Arm
Kodak 2180 camera
- BV family:
Libra, Endura, Pulsera
Fiber Cable
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=Kodak, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=2180, IP=accordingly, port nbr=5040, Printer Type=Kodak 2180
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=14INx17IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnif=CUBIC, Smoothing=NORMAL, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=CS435\CN0
n to print select Target=Kodak, Print page format=3x4-12 , click Ok&Export
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips C-Arm
Kodak 1120 camera
- BV family:
Libra, Endura, Pulsera
Fiber Cable
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=Kodak, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=1120, IP=accordingly, port nbr=5040, Printer Type=Kodak 1120
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=14INx17IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnif=CUBIC, Smoothing=NORMAL, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=CS435\CN0
n to print select Target=Kodak, Print page format=3x4-12 , click Ok&Export
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Philips C-Arm
Crossed
- BV family:
Network
Libra, Endura, Pulsera
Cable
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=8200, IP=accordingly, port nbr=5040, Printer Type=Kodak 8200
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=14INx17IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=11, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=Pmsv3k.w87,9
n to print select Target=DryView, Print page format=3x4-12 , click Ok&Export
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
DICOM Network
iew
00 DryV
3M 87
Philips C-Arm
Fiber Cable
- BV family:
Libra, Endura, Pulsera
Fiber Cable
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=8700, IP=accordingly, port nbr=5040, Printer Type=Kodak 8700
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=14INx17IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=11, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=Pmsv3k.w87,9
n to print select Target=DryView, Print page format=3x4-12 , click Ok&Export
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
DICOM Network
iew
00 DryV
3M 87
Philips C-Arm
Fiber Cable
- BV family:
Libra, Endura, Pulsera
Fiber Cable
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=8500, IP=accordingly, port nbr=5040, Printer Type=Kodak 8500
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=11INx14IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=11, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=Pmsv3k.w87,9
n to print select Target=DryView, Print page format=3x4-12 , click Ok&Export
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set:
n General: Log.Name=8500
n General: Database Name=8500, Model=8500, Memory=32
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips C-Arm
- BV family:
Libra, Endura, Pulsera
Data 37-pin
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=8100, IP=accordingly, port nbr=5040, Printer Type=Kodak 8100
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=14INx17IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=11, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=Pmsv3k.w87,9
n to print select Target=DryView, Print page format=3x4-12 , click Ok&Export
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
DICOM Network
Control 9 pin
Philips C-Arm COPCIL board
- BV family: Copper Cable
Libra, Endura, Pulsera
Data 37 pin
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=8300, IP=accordingly, port nbr=5040, Printer Type=Kodak 8300
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=8INx10IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=2, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=0,10
n to print select Target=DryView, Print page format=2x3-6 , click Ok&Export
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips C-Arm
- BV family:
Libra, Endura, Pulsera
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=8900, IP=accordingly, port nbr=5040, Printer Type=Kodak 8900
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=14INx17IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=11, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=Pmsv3k.w87,9
n to print select Target=DryView, Print page format=3x4-12 , click Ok&Export
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
DICOM Network
Philips C-Arm
- BV family:
Libra, Endura, Pulsera
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=DryView, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=DV8150, IP=accordingly, port nbr=5040, Printer Type=Kodak 8100
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=14INx17IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=11, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=Pmsv3k.w87,9
n to print select Target=DryView, Print page format=3x4-12 , click Ok&Export
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
DICOM Network
Philips C-Arm
- BV family:
Libra, Endura, Pulsera
BV Setup:
n by using the BV Service Tool
n select Program Manual/DICOM Target Configuration/Printer Targets
n select Printer Target=no name
n set: Name=CMI1000, Type=Print, Order in list=eg 1, Enable=Yes
n AE title=CMI1000, IP=accordingly, port nbr=5040, Printer Type=Kodak 8300
n select next
n check that Priority=MED, Destination=PROCESSOR, Bin=1,
n Orientation=PORTRAIT, Film Size=8INx10IN, Medium Type=BLUE FILM
n Border Density=BLACK, Border Density Value=0, Copies=1
n Magnification=CUBIC, Smoothing=2, Min Density=20, Max Density=300
n Polarity=NORMAL, Trim=NO, Configuration Information=0,10
n to print select Target=CMI1000, Print page format=2x3-6, click Ok&Export
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
Merge
Philips C-Arm Keypad
- BV family:
Merge ExamWorks
Libra, Endura, Pulsera
- BV300
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
Video Cable
Image Video OUT
Merge Video Board
Kodak DryView 8300
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=0
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
Merge
Philips C-Arm Keypad
- BV family:
Merge ExamWorks
Libra, Endura, Pulsera
- BV300
25-to-25 pin
RS232 Cable Kodak 190 camera
Serial 232 Link OUT Merge Comm Board
Video Cable
Image Video OUT
Merge Video Board
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
Fiber Cable
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
Fiber Cable
Video Cable
Image Video OUT
Merge Video Board
Kodak 9410 PACS Link
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
- DEFAULT=YES
n into usr/home/merge/xpi/config/tk_app.ini under [9410] check:
- SERVICE_LIST=Grayscale_Print_Service_List
- HOST_NAME=IPaddress of 9410, PORT_NUMBER=1024
n into usr/home/merge/xpi/config/9410_PACS_LINK.prn under [AETITLE_OVERRIDE]
check:
- Magnification_Type=CUBIC, Smoothing_Type=11,
- Border_Density=BLACK, Max_Density=300, Trim=NO
- Configuration_ Information= LUT=0,9, Polarity=NORMAL
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
Fiber Cable
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
Fiber Cable
Video Cable
Image Video OUT
Merge Video Board
Kodak 9410 PACS Link
Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into 9410 Local Printers
- DEFAULT=YES
n into usr/home/merge/xpi/config/tk_app.ini under [9410] check:
- SERVICE_LIST=Grayscale_Print_Service_List
- HOST_NAME=IPaddress of 9410, PORT_NUMBER=1024
n into usr/home/merge/xpi/config/9410_PACS_LINK.prn under [AETITLE_OVERRIDE]
check:
- Magnification_Type=CUBIC, Smoothing_Type=11,
- Border_Density=BLACK, Max_Density=300, Trim=NO
- Configuration_ Information= LUT=0,9, Polarity=NORMAL
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8500, Model=8500, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8500, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8500, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
Merge
RS422
Philips C-Arm Keypad
- BV family: Control 9-pin 9-pole Plug
Merge ExamWorks COPCIL Board
Libra, Endura, Pulsera
Copper Cable
- BV300
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
Data 37-pin
Video Cable
Image Video OUT
Merge Video Board Kodak DryView 8100
Kodak 9410 PACS Link
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
Merge
Philips C-Arm Keypad
Control 9-pin
- BV family:
Merge ExamWorks COPCIL Board
Libra, Endura, Pulsera
Copper Cable
- BV300
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
Data 37-pin
Video Cable
Image Video OUT
Merge Video Board Kodak DryView 8300
Kodak 9410 PACS Link
- Medium_Type=CURRENT, Film_Destination=PROCESSOR,
- Film_Size=8INX10IN, Magnification_Type=CUBIC,
- Smoothing_Type=0, Border_Density=BLACK,
- Empty_Image_Density=BLACK, Max_Density=300
- Trim=NO, Configuration_ Information= LUT=0,10,
- Polarity=NORMAL
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Merge
Philips C-Arm Keypad
- BV family:
Merge ExamWorks
Libra, Endura, Pulsera
- BV300
25-to-25 pin
Kodak 160 camera
RS232 Cable Crossed
Serial 232 Link OUT Merge Comm Board
Network Cable
Video Cable
Image Video OUT
Merge Video Board
Kodak MIM 200
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation= Cubic, Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
DICOM Network
Merge
Philips C-Arm Keypad
- BV family:
Merge ExamWorks
Libra, Endura, Pulsera
- BV300
25-to-25 pin
Kodak 2180 camera
RS232 Cable Crossed
Serial 232 Link OUT Merge Comm Board
Network Cable
Video Cable
Image Video OUT
Merge Video Board
Kodak MIM 200
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
n Formatting: Pixel Pitch=12.6582
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic, Modality=OT (Always=N)
n Border=3.99 (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N)
n Negotiate Color Print=Off
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Merge
Philips C-Arm Keypad
- BV family:
Merge ExamWorks
Libra, Endura, Pulsera
- BV300
25-to-25 pin
Kodak 1120 camera
RS232 Cable Crossed
Serial 232 Link OUT Merge Comm Board
Network Cable
Video Cable
Image Video OUT
Merge Video Board
Kodak MIM 200
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.5
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic, Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Merge
Philips C-Arm Keypad
- BV family:
Merge ExamWorks
Libra, Endura, Pulsera
- BV300
25-to-25 pin
RS232 Cable Crossed
Serial 232 Link OUT Merge Comm Board
Network Cable
Video Cable
Image Video OUT
Merge Video Board
Kodak MIM 200 Kodak DryView 8200
- SERVICE_LIST=Grayscale_Print_Service_List
- HOST_NAME=IPaddress of MIM200, PORT_NUMBER=5040
n into usr/home/merge/xpi/config/9410_PACS_LINK.prn under [AETITLE_OVERRIDE]
check:
- Magnification_Type=CUBIC, Smoothing_Type=11,
- Border_Density=BLACK, Max_Density=300, Trim=NO
- Configuration_ Information= LUT=0,9, Polarity=NORMAL
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
n Supported Item: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnification=On, Bilin=On, Repl=On
n Interpolation: Cubic Spline=On, Cubic Convolution 2=On
n Format Types: Custom=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n SCU: Density Space= On, Variable Border=On, PLUT Service= On
n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=11 (Always=N), Border=3.99 (Always=N)
Fiber Cable
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
Fiber Cable
Video Cable
Image Video OUT
Merge Video Board
Kodak MIM 200
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=11 (Always=N), Border=3.99 (Always=N),
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
Fiber Cable
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
Fiber Cable
Video Cable
Image Video OUT
Merge Video Board
Kodak MIM 200
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set:
n General: Log.Name=8500
n General: Database Name=8500, Model=8500, Memory=32
n Media Info: Media=11x14in, 3388x4283, 4193, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=11 (Always=N), Border=3.99 (Always=N),
n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N)
DICOM Network
Merge
RS422
Philips C-Arm Keypad
- BV family: Control 9-pin 9-pole Plug
Merge ExamWorks COPCIL Board
Libra, Endura, Pulsera
Copper Cable
- BV300
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
Data 37-pin
Video Cable
Image Video OUT
Merge Video Board Kodak DryView 8100
Kodak MIM 200
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=11 (Always=N), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
n on COMMUNICATIONS Menu:
n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952
n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off
n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87
n on LOCAL PANEL Menu: Contrast=6, Density=3.00
n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361
n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
DICOM Network
Merge
Philips C-Arm Keypad
Control 9-pin
- BV family:
Merge ExamWorks COPCIL Board
Libra, Endura, Pulsera
Copper Cable
- BV300
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
Data 37-pin
Video Cable
Image Video OUT
Merge Video Board Kodak DryView 8300
Kodak MIM 200
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=11.9048
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3
n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=0 (Always=N), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N)
n Negotiate Color Print=Off
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Merge
Philips C-Arm Keypad
- BV family:
Merge ExamWorks
Libra, Endura, Pulsera
- BV300
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
Video Cable
Image Video OUT
Merge Video Board
Kodak DryView 8900
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4
n Formatting: Min Vert Sep=4, Trim Width Enabled=4
n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:
n Negotiate Presentation LUT=No, Negotiate Color Print=No
n TFT=Pmsv3k.w87 (Always=Y), Contrast=9 (Always=N)
n Smoothing Type=11 (Always=N), Image Polarity (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=No (Always=N), Warnings=No
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N)
n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No
n Modality ID=No, Annotation Override=No, Density Patch=No
n Image Resizing=Minify/Scale (Always=N)
n Text Box Location=None, Source ID=bv
DICOM Network
Merge
Philips C-Arm Keypad
- BV family:
Merge ExamWorks
Libra, Endura, Pulsera
- BV300
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
Video Cable
Image Video OUT
Merge Video Board
Kodak DryView 8150
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2
n Formatting: Min Vert Sep=2, Trim Width Enabled=2
n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:
n Negotiate Presentation LUT=No, Negotiate Color Print=No,
n TFT Set Name= Pmsb.w87 (Always=Y)
n Contrast=9 (Always=N), Smoothing Type=11 (Always=N)
n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N)
n Image Polarity=Normal (Always=N)
n NeventReports=No (Always=Y), Warnings=Yes
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
n 2mm Border=Yes, Film Clip Border=No,
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No,
n Modality ID=No, Annotation Override=No, Density Patch=No
n Image Resizing=Minify/Scale (Always=N),
n Text Box Location=None, Source ID=bv
DICOM Network
Merge
Philips C-Arm Keypad
- BV family:
Merge ExamWorks
Libra, Endura, Pulsera
- BV300
25-to-25 pin
RS232 Cable
Serial 232 Link OUT Merge Comm Board
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
n under More Quality Settings:
n Tonescaling=Presentation LUT (Always=N),
n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N)
n Smoothing=11 (Always=N), Polarity=Positive (Always=N)
n Interpolation=CUBIC (Always=N), Trim=No (Always=N)
n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults:
n Media Size=8.5x11 (Always=N), don’t care, this field plays no role
n Image Resizing=Minify (Always=N),
n Priority=Normal (Always=N), NeventReports=No (Always=Y),
n Warnings=Yes, Color=Yes
n (set Color=No when only b/w images are printed and set it to be sure
n to apply to the b/w images the Greyscale Image Quality settings)
n Page Annotation:
n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
5
setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Philips CT
Aura / Secura Philips 37-pin RS422 37-to-9 pin
Control Cable Host Adaptor Cable
Host Control 422 OUT Host UKEIB
Philips 37-pin
Data Cable
Image Data OUT DEIB
Fiber Cable
Fiber Cable
er
anag
putM
i-In
Mult
8800
3M
iew
00 DryV
3M 87
Fiber Cable
8700 Dual
8800 MIM
Fiber Cable
Fiber Cable
er
anag
putM
i-In
Mult
8800
3M
iew
00 DryV
3M 87
Fiber Cable
8700 Dual
iew
00 DryV
3M 87
Fiber Cable
8800 MIM
8700 Dual
Philips CT
Aura / Secura Philips 37-pin RS422 37-to-9 pin
Control Cable Host Adaptor Cable
Host Control 422OUT Host UKEIB
Philips 37-pin
Data Cable
Image Data OUT DEIB
Fiber Cable
Fiber Cable
iew
00 DryV
3M 87
8700 Plus
8700 Standard
Philips CT
Aura / Secura Philips 37-pin RS422 37-to-9 pin
Control Cable Host Adaptor Cable
Host Control 422 OUT
iew
00 DryV
Philips 37-pin 3M 87
Data Cable
Image Data OUT
Fiber Cable
Fiber Cable
3M H Q L a ser Im a g er
M969 HQ
M969 HQ Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST: Pixel Correction=No, Scale Format=No, Scale Magnif.=No, Slides=Super
n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Odd, Timeout=255
Philips 37-pin
Data Cable
Image Data OUT
Fiber Cable
Fiber Cable
3 M L a se r Im a g er
M959 XL
Setup:
n on XL Control Panel set Density & Contrast depending on chemistry
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
n on XL Input Module install LUT 322A0
M959 XL Setup:
n on COMM Menu: 959 Default
n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Odd, Timeout=255
DryView 8100
Philips CT
Aura / Secura Philips 37-pin RS422 37-to-9 pin
Control Cable Host Adaptor Cable
Host UKEIB
Host Control 422 OUT Imager
DPI4-to-DPC Cable
Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,
8800/8500 Dual and HQ cameras by basically using the correspondent
Model into 9410 Local Printers and in case of 8500 and HQ by installing
8500 and HQ into EasyVision/EasyRAD Camera Config.File
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=255, Parity=Odd, Memory=22
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=ev, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=Off
n TFT/ULUT=Pmsv3k.w87, Mem.Full =On, Image Size =On, Alarm Mode=On
n into Defaults: Dest.=Printer 1, Media Size=14x17, C=9, D=14, Bit=8
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=255, Parity=Odd, Memory=22
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=ev, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ctas,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst.:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ev,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst.:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ev,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
Fiber Cable
Host Control 422 OUT
RS422 37-to-50 pin
Philips 37-pin Fiber Cable
Digital Adaptor Cable
Data Cable
Image Data OUT
Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,
8800/8500 Dual and HQ cameras by basically using the correspondent
Model into MIM 200 Destinations and in case of 8500 and HQ
by installing 8500 and HQ into EasyVision/EasyRAD Camera Config.File
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst.:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ev,
n Mod.Name=ev, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=MOV
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst.:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= ev,
n Mod.Name=ev, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
DICOM Network
DryView 8300
Philips CT
Aura / Secura
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=1
n Film Layout : Format=1 on 1, Mode=Portrait
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
Philips CT
Fiber Cable
Aura / Secura 00 DryV
iew
3M 87
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,
8800/8500 Dual and HQ cameras by basically using the correspondent
Model into 9410 Local Printers and in case of 8500 and HQ by installing
8500 and HQ into EasyVision/EasyRAD DICOM Camera Config.File
(if HQ DICOM Camera Config.File not yet available it will also work with 8700)
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips CT
Aura / Secura
Data 37-pin
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title=9410, Port=1024, Max Associations=5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
Control 9 pin
Philips CT COPCIL board
Aura / Secura Copper Cable
Data 37 pin
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No, Print Always=Yes
n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Data 37 pin
EasyVision Setup:
n after power up select 4=Install Config, 2=Start Config
n below window containing list of Configured Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 9410, port=1024, AETitle=9410
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration i.e., do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Configured Nodes select the EV Node and click Edit
n the whole menu is called EasyVision Config, select Peripherals settings
n below window containing list of Printers defined for EV, click New
n set Interface=DICOM, Printer=3M 8610, Name=dv8610, AE title=9410
n into Config. Media List:
n 8x10 G8=On (8-bit-print), 8x10 G12=On (12-bit-print) (Off if 8600)
n Proceed, Exit, Proceed, Execute, Proceed, click on handle, click on triangle
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8610, Model=8600/8610, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=1, Installed TFT/ULUT=don’t care
n Max.Density=300, Contrast=5, Border Density=0
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8610, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8610, Copies=1, Contrast Table=5, Max.Density=300
n Border Density=0, Mag.Type=8, Smoothing=1
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Gamma Table=Linear in Transmittance, Contrast Group=1, Kernel Group=1
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:
n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0
n (if 8600: Imager=2.5, VRTX32=1.08, Contrast=6.G.7, Conv.Kernel=1.0.5)
n on 8610 Operator Menu into Configure User set:
n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P, 2:1P, 4:1P, 6:1P
n Gamma Table=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care
n on 8610 Service Menu into Configure User set:
n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255
n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
DICOM Network
Philips CT
Kodak 160 camera
Aura / Secura
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=3 i.e., 435 (Always=N), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
DICOM Network
Philips CT
Kodak 2180 camera
Aura / Secura
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
n Formatting: Pixel Pitch=12.6582
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic,
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N)
n Negotiate Color Print=Off
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips CT
Kodak 1120 camera
Aura / Secura
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.5
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic,
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Philips CT
Aura / Secura
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
DICOM Network
iew
00 DryV
3M 87
Philips CT
Fiber Cable
Aura / Secura
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=0 (Always=N)
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips CT
Aura / Secura
Data 37-pin
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
DICOM Network
Control 9 pin
Philips CT COPCIL board
Aura / Secura Copper Cable
Data 37 pin
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=11.811
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3
n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT=u1_109b.w8u (Always=Y), Contrast (dry)=10 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=0 (Always=N)
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Data 37 pin
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set:
n General: Log.Name=8610 (or 8600)
n General: Database=8610 (or 8600), Model=8610 (or 8600), Memory=32
n Media Info: Media=8x10in, 5025x6200, 6020, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12 (8 if 8600), Header/Line,Transfer=2000,Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=25.8065
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5
n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=5 (Always=N)
n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Transmittance
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n Smoothing Type=1 (Always=Y), Image Polarity=Normal (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N)
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N)
n Negotiate Color Print=Off
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:
n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0
n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)
n on 8610 Operator Menu into Configure User set:
n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P
n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care
n on 8610 Service Menu into Configure User set:
n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255
n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
DICOM Network
Philips CT
Aura / Secura
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
DICOM Network
Philips CT
Aura / Secura
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
DICOM Network
Philips CT
Aura / Secura
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
Philips CT Mx8000
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=DV8300 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=DV8300, AETitle=8300
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=104, Max PDU=16384
n into Expert Mode set: Port=104, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=DV8300
n select Options set Film Format=6 (2x3), Film Size=8x10 or 14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=0
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=190 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=190, AETitle=190
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=5040, Max PDU=16384
n into Expert Mode set: Port=5040, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=190
n select Options set Film Format=20 (4x5), Film Size=14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
iew
00 DryV
3M 87
Philips CT Mx8000
Fiber Cable
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,
8800/8500 Dual and HQ cameras by basically using the correspondent
Model into 9410 Local Printers
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=DV8700 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=DV8700, AETitle=9410
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=1024, Max PDU=16384
n into Expert Mode set: Port=1024, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=DV8700
n select Options set Film Format=20 (4x5), Film Size=14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips CT Mx8000
Data 37-pin
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=DV8100 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=DV8100, AETitle=9410
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=1024, Max PDU=16384
n into Expert Mode set: Port=1024, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=DV8100
n select Options set Film Format=20 (4x5), Film Size=14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
DICOM Network
Control 9 pin
Philips CT Mx8000 COPCIL board
Copper Cable
Data 37 pin
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=DV8300 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=DV8300, AETitle=8300
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=1024, Max PDU=16384
n into Expert Mode set: Port=1024, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=DV8300
n select Options set Film Format=6 (2x3), Film Size=8x10 or 14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips CT Mx8000
Kodak 160 camera
Crossed
Network Cable
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=160 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=160, AETitle=160
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=5040, Max PDU=16384
n into Expert Mode set: Port=5040, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=160
n select Options set Film Format=20 (4x5), Film Size=14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
DICOM Network
Philips CT Mx8000
Kodak 2180 camera
Fiber Cable
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=2180 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=2180, AETitle=2180
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=5040, Max PDU=16384
n into Expert Mode set: Port=5040, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=2180
n select Options set Film Format=20 (4x5), Film Size=14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips CT Mx8000
Kodak 1120 camera
Fiber Cable
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=1120 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=1120, AETitle=1120
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=5040, Max PDU=16384
n into Expert Mode set: Port=5040, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=1120
n select Options set Film Format=20 (4x5), Film Size=14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Philips CT Mx8000
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=DV8200 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=DV8200, AETitle=8200
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=5040, Max PDU=16384
n into Expert Mode set: Port=5040, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=DV8200
n select Options set Film Format=20 (4x5), Film Size=14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
DICOM Network
iew
00 DryV
3M 87
Philips CT Mx8000
Fiber Cable
Fiber Cable
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=DV8700 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=DV8700, AETitle=8700
n set Capability file=Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=5040, Max PDU=16384
n into Expert Mode set: Port=5040, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=DV8700
n select Options set Film Format=20 (4x5), Film Size=14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
MIM200 Setup:
n on Configure, Network:
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips CT Mx8000
Data 37-pin
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=DV8100 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=DV8100, AETitle=8100
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=5040, Max PDU=16384
n into Expert Mode set: Port=5040, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=DV8100
n select Options set Film Format=20 (4x5), Film Size=14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
DICOM Network
Control 9 pin
Philips CT Mx8000 COPCIL board
Copper Cable
Data 37 pin
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=DV8300 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=DV8300, AETitle=8300
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=5040, Max PDU=16384
n into Expert Mode set: Port=5040, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=DV8300
n select Options set Film Format=6 (2x3), Film Size=8x10 or 14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips CT Mx8000
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=DV8900 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=DV8900, AETitle=8900
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=5040, Max PDU=16384
n into Expert Mode set: Port=5040, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=DV8900
n select Options set Film Format=20 (4x5), Film Size=14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
DICOM Network
Philips CT Mx8000
CT Setup:
n login as Configuration
n select Network/Add Node=Other
n set Name=DV8150 and click OK
n set IP addr.=accordingly, Add Device=Printer, Name=DV8150, AETitle=DV8150
n set Capability file= Kodak190_DICOM
n into Expert Mode set: Enable_AutoDisconnect=On, Port=5040, Max PDU=16384
n into Expert Mode set: Port=5040, ARTIM=5, click OK, OK, Exit, OK (reboot)
n login as MD
n select images to be printed, select File/Film, select Tasks/Master Film
n into Master Film:
n select File/Printer=DV8150
n select Options set Film Format=20 (4x5), Film Size=14x17 (Inch)
n select Options set Film Orientation=Portrait, Print Priority=High, Nbr.Copies=1
n select Options set Medium Type=Blue Film, Film Destination=Processor
n select Options set Magnif.Type=Cubic, Smoothing=Printer Default
n select Options set Border Density=Black, Empty Image Density=Black
n select Options set Trim=No, Polarity=Normal
n select File/Print
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
DICOM Network
Philips CT
- Mx8000
- Brilliance
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
n under More Quality Settings:
n Tonescaling=Presentation LUT (Always=N),
n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N)
n Smoothing=13 (Always=N), Polarity=Positive (Always=N)
n Interpolation=CUBIC (Always=N), Trim=No (Always=N)
n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults:
n Media Size=8.5x11 (Always=N), don’t care, this field plays no role
n Image Resizing=Minify (Always=N),
n Priority=Normal (Always=N), NeventReports=No (Always=Y),
n Warnings=Yes, Color=Yes
n (set Color=No when only b/w images are printed and set it to be sure
n to apply to the b/w images the Greyscale Image Quality settings)
n Page Annotation:
n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
5
setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Fiber Cable
Fiber Cable
er
nag
ut Ma
-Inp
ulti
0M
880
3M
iew
0 DryV
3M 870
Fiber Cable
8700 Dual
8800 MIM
Requirements: Tomoscan M/EG rel. 3.0, 8800 rel. 4.2, 8700 rel. 1.15
Setup:
n on Philips Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
Fiber Cable
Fiber Cable
iew
0 DryV
3M 870
8700 Plus
Setup:
n on Philips Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
8700 Standard
Philips 25-pin 25-to-25 Null RS232 25-to-9 pin
Philips CT Tomoscan M/EG
Control Cable Modem Cable Host Adaptor Cable
Host Control 232 OUT
iew
00 DryV
3M 87
Philips 37-pin
I mage Data OUT Data Cable
Fiber Cable
Fiber Cable
er
nag
ut Ma
-Inp
ulti
0M
880
3M
iew
0 DryV
3M 870
Fiber Cable
8500 Dual
8800 MIM
Requirements: Tomoscan M/EG rel. 3.0, 8800 rel. 5.1, 8500 rel. 1.22
Setup:
n on Philips Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
Fiber Cable
Fiber Cable
iew
0 DryV
3M 870
8500 Plus
Setup:
n on Philips Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
8500 Standard
Philips 25-pin 25-to-25 Null RS232 25-to-9 pin
Philips CT Tomoscan M/EG
Control Cable Modem Cable Host Adaptor Cable
Host Control 232 OUT
iew
00 DryV
3M 87
Philips 37-pin
I mage Data OUT Data Cable
Setup:
n on Philips Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
Fiber Cable
Fiber Cable
8300 Dual
er
Manag
put
ulti-In
Fiber Cable
00M
3M88
8800 MIM
Requirements: Tomoscan M/EG rel. 3.0, 8800 rel. 5.1, 8300 rel. 4.2
Setup:
n on Philips Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
8300 Setup:
n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=None, Modality Group=0
8800 Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: Density=16, Contrast=10
n on HOST Menu: Pixel Corr.=Yes, Scale Format=Yes, Scale Mag.=Yes
n on EIB Menu: Parity=Disable, Timeout=60
8300
Philips 25-pin 25-to-25 Null RS232 25-to-9 pin
Philips CT Tomoscan M/EG
Control Cable Modem Cable Host Adaptor Cable
Host Control 232 OUT
Setup:
n on Philips Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
8300 Setup:
n on 8300 Operator Menu set:
n Density=16, Contrast=10, Sharp/Smooth=Auto
n Film Layout : Format=6 on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Delimiter=Comma, Protocol=3M
n Digital Interface: Parity=None, Modality Group=0
Philips 37-pin
Data Cable
I mage Data OUT DEIB
Fiber Cable
Fiber Cable
3 M H Q L a ser Im a g e r
M969 HQ
Setup:
n on Philips Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
M969 HQ Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes
n on EIB Menu: Parity=Disable, Timeout=60
M969 HQT
Philips 25-pin 25-to-25 Null RS232 25-to-9 pin
Philips CT Tomoscan M/EG
Control Cable Modem Cable Host Adaptor Cable 3M H Q L a ser Im a g er
Philips 37-pin
I mage Data OUT Data Cable
Setup:
n on Philips Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
Philips 37-pin
Data Cable
I mage Data OUT DEIB
Fiber Cable
Fiber Cable
3 M L a se r I m a g er
M959 XL
Setup:
n on Philips Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
n on XL Control Panel set Density & Contrast depending on chemistry
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
n on XL Input Module install LUT 322A0
M959 XL Setup:
n on COMM Menu: 959 Default
n on EIB Menu: Parity=Disable, Timeout=60
Philips 37-pin
Image Data OUT Data Cable
DryView 8100
Philips CT Tomoscan M/EG Philips 25-pin 25-to-25 Null RS232 25-to-9 pin
Control Cable Modem Cable Host Adaptor Cable UKEIB
Host Control 232 OUT Host
Imager
DPI4-to-DPC Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Setup:
n on Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=60, Parity=None, Memory=7
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
Philips 25-pin
25-to-25 Null
Control Cable RS232 25-to-9 pin
Philips CT Tomoscan M/EG Modem Cable
Host Adaptor Cable
Host UKEIB
Host Control 232 OUT Imager
Setup:
n on Tomoscan M/EG install Camera Config.File 3M-LASER 952(EPROM)
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=60, Parity=None, Memory=7
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=ctm, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On
n TFT/ULUT=Pmsb.w87, Mem.Full =On, Image Size =On, Alarm Mode=On
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Tomoscan M/EG CT:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ctm,
n Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=512, Lines=512, Parity=None, Timer=59, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup:
n Select Destination=KELI 160, Media Size Select=35x43
n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:
n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline
n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On
n Curve Shape=3.0, Auto Study=Off, Console=On
n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:
n into Machine Setup Menu set: Tonescaling=CurveShape
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Tomoscan M/EG CT:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ctm,
n Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=512, Lines=512, Parity=None, Timer=59, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Tomoscan M/EG CT:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ctm,
n Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=512, Lines=512, Parity=None, Timer=59, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
25-to-15 pin
Host Control Fiber Cable
Converter Box
232 OUT
Philips 37-pin RS422 37-to-50 pin Fiber Cable
Image Data OUT Data Cable Digital Adaptor Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM200 Destination
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Tomoscan M/EG CT:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ct,
n Mod.Name=ct, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=512, Lines=512, Parity=None, Timer=59, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
Data 37 pin
Kodak MIM 200
Kodak DryView 8100
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Tomoscan M/EG CT:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ct,
n Mod.Name=ct, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=512, Lines=512, Parity=None, Timer=59, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
DICOM Network
DryView 8300
CT M/EG Setup:
- log as sa in Service Menu and go to Database Modification/Printer Device/Apply
- set Name=Kodak 8300, AE=8300, IP=accordingly, Port=104
- set Medium=Blue Film, Orient.=Portrait, Interpolation=Cubic, Density=300
- select in Film Formats: 8x10 1,1; 2,1; 2,2; 3,2
- press Add, press Set Current
- log as oper in Main Menu and go to Configure/Print and select 8300
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=0 ie Auto
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
8700 Plus
Fiber Cable
Requirements: Philips CT Tomoscan M/EG rel. 4.0, 9410 v1.6, 8700 v1.34
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Philips CT Tomoscan M/EG Setup:
n log as sa in Service Menu and go to Database Modification/Printer Device/Apply
n set Name=Kodak 8700, AE=9410, IP=accordingly, Port=1024
n set Medium=Blue Film, Orient.=Portrait, Interpolation=Cubic, Density=300
n select in Film Formats: 14x17 1,1; 2,1; 2,2; 3,2; 3,3; 4,3; 5,3; 4,4; 5,4
n press Add, press Set Current
n log as oper in Main Menu and go to Configure/Print and select 8700
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No, Print Always=Yes
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips CT Tomoscan M/EG
Data 37-pin
Requirements: Philips CT Tomoscan M/EG rel. 4.0, 9410 v1.6, 8100 v2.4.1
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title=9410, Port=1024, Max Associations=5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=13
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No, Print Always=Yes
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
DryView 8300
Control 9 pin
Philips CT Tomoscan M/EG COPCIL board
Copper Cable
Data 37 pin
Requirements: Tomoscan M/EG v4.0, 9410 v1.6, 8300 v 4.9.1, 8300 LUT v3.0.3B
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No, Print Always=Yes
n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e.,Auto
n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
DICOM Network
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
n Supported Item: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnification=On, Bilin=On, Repl=On
n Interpolation: Cubic Spline=On, Cubic Convolution 2=On
n Format Types: Custom=On, Row Symmetric=On
DICOM Network
iew
00 DryV
3M 87
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=13 (Always=N)
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips CT Tomoscan M/EG
Data 37-pin
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
DICOM Network
Control 9 pin
Philips CT COPCIL board
Tomoscan M/EG Copper Cable
Data 37 pin
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e.,Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips CT
Tomoscan M/EG
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4
DICOM Network
Philips CT
Tomoscan M/EG
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2
n Formatting: Min Vert Sep=2, Trim Width Enabled=2
DICOM Network
Philips CT
Tomoscan M/EG
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
n under More Quality Settings:
n Tonescaling=Presentation LUT (Always=N),
n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N)
n Smoothing=13 (Always=N), Polarity=Positive (Always=N)
n Interpolation=CUBIC (Always=N), Trim=No (Always=N)
OEM Data
Manufacturer Philips
Modality DR
Model Digital Diagnost
sw version v1.4
Implement. Class UID 1.3.46.670589.26.1.4
Implement. Version Name DigiDiagnost1.4
Kodak Data
DICOM-interface MIM internal / external or 9410 as below reported
DICOM-intf sw version as below reported
Printer model All cameras as below reported
Printer sw version as below reported
What’s new:
The setup of a Kodak printer for a given OEM Modality was split in 2 separate documents:
Therefore, as first step, setup the printer as per the correspondent page of the Setup Catalog for Kodak Cameras
(ie go to the Setup Catalog doc and do that first, then come back
here and finish install as per this Specific Setup Manual doc).
Therefore, as second and final step, setup the printer as per the indications reported here into the Setup Manual
for that particular OEM Modality.
Note that the Setup Manual has 2 sections ie the DryView section and the Wet section.
Note: MIM setup is basically also valid for 9410 by using AE=9410, Port=1024
Note: for each DryView camera select into the Modality the correspondent Prototype,
in particular for 8900 choose the Kodak 8900 standard
(or 3M / Kodak 8900 and in this case 2mm Border=No, or 3M 8200),
in particular for CMI1000 choose the Kodak CMI1000 or Codonics 1660MD.
DryView section:
Setup for Kodak DryView cameras ie
8900, 8700, 8610, 8600, 8500, 8300, 8200, 8150, 8100, 1000
Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic,
ie common to all DICOM connections independently from the Specific modality connected.
Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup
Catalog, and then, as second and final step, setup the Image Quality parameters as per the
Setup Manual for the Specific OEM Modality here below reported.
MIM external 8700, 8500 8100 8300 8610 (8600) 8200 1000
into Kodak catalog 15 16 17 18 14 21
see Setup as per page
MIM sw version 6.1 6.1 6.1 6.1 6.1 2.0.b3
Printer sw version 1.34 2.4.1 3.5 2.4 (2.5) 4.9.1 1.0.b8
Image Quality setup into MIM (or 9410) for DryView cameras:
Which are the Image Quality parameters sent out by the OEM Modality:
DICOM Sent out by Value sent out for Value sent out Value sent out
Parameters Modality 8900, 8150, 8700, for 8300 for 8610, 8600
(Yes/No) 8500, 8200, 8100,
1000
Config. Information Yes LUT=0,9 LUT=0,10 LUT=0,3
(LUT=TFT,Contrast)
Max. Density Yes 300 300 300
Magnification Yes NONE NONE NONE
Smoothing No
PLUT No
Illumination (PLUT) No
Reflective Ambient No
Light (PLUT)
Wet section:
Setup for Kodak Wet cameras ie 160, 2180, 1120, 190
Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic,
ie common to all DICOM connections independently from the Specific modality connected.
Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup
Catalog, and then, as second and final step, setup the Image Quality parameters as per the
Setup Manual for the Specific OEM Modality here below reported.
Note: in regards to 969 parameters use the same as per 8700 setup.
Image Quality setup into MIM (or 190) for Wet cameras:
Note: reported setup was tested eg for 160 and tentatively is valid also for other cameras ie
2180, 1120, 190.
Which are the Image Quality parameters sent out by the OEM Modality:
DICOM Sent out by Value sent out for
Parameters Modality 160, 2180, 1120,
(Yes/No) 190
Config. Information Yes CS435\CN0
(CurveShape\Contrast)
Max. Density Yes 300
Magnification Yes NONE
Smoothing No
PLUT No
Illumination (PLUT) No
Reflective Ambient No
Light (PLUT)
Miscellaneous:
Notes:
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
5
setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Fiber Cable
Fiber Cable
er
anag
tM
Inpu
ulti-
0M
880
3M
iew
00 DryV
3M 87
Fiber Cable
8700 Dual
8800 MIM
Requirements: Digital Diagnost rel. 1.1, 8800 rel. 5.1, 8700 rel. 1.22
Fiber Cable
Fiber Cable
iew
00 DryV
3M 87
8700 Plus
8700 Standard
Data Cable
Image Data OUT
Fiber Cable
Fiber Cable
3M H Q L aser Im ager
M969 HQ
M969 HQ Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST Menu:
n Frame=No,Pxl Corr.=No,Scale Format=No,Scale Magnif.=No,Slides=Super
n Override 952 Beta=No (interpolation curve=11 sent from modality)
n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Odd, Timeout=60
M969 HQT
Philips 37-pin RS422 37-to-9 pin
Philips Digital Diagnost Host Adaptor Cable
Control Cable
Host Control 422 OUT 3 M H Q L aser Im a ger
Philips 37-pin
Data Cable
Image Data OUT
RS422 9-pole
Philips 37-pin RS422 37-to-9 pin plug
Philips Digital Diagnost Host Adaptor Cable
Control Cable
Host Control 422 OUT
Philips 37-pin
Data Cable
Image Data OUT
DryView 8100
DPI4-to-DPC Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
and if HQ by installing HQ into Digital Diagnost Camera Config.File
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=255, Parity=Odd, Memory=22
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=digdiag, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=Off
n TFT/ULUT=Pmsv3k.w87, Mem.Full =On, Image Size =On, Alarm Mode=On
n into Defaults: Dest.=Printer 1, Media Size=14x17, C=9, D=14, Bit=8
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=60, Parity=Odd, Memory=22
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=digdiag, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=Off
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Direct Connect, Config.Add, Digital, Unqualified:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=dd,
n Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1024, Lines=1024, Parity=Odd, Timer=10, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup:
n Select Destination=KELI 160, Media Size Select=35x43
n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:
n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline
n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On
n Curve Shape=4.0, Auto Study=Off, Console=On
n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:
n into Machine Setup Menu set: Tonescaling=CurveShape
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Direct Connect, Config.Add, Digital, Unqualified:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=dd,
n Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1024, Lines=1024, Parity=Odd, Timer=10, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Direct Connect, Config.Add, Digital, Unqualified:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=dd,
n Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1024, Lines=1024, Parity=Odd, Timer=10, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
Fiber Cable
Host Control 422 OUT
RS422 37-to-50 pin
Philips 37-pin Fiber Cable
Digital Adaptor Cable
Data Cable
Image Data OUT
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM200 Destination
and if HQ by installing HQ into Digital Diagnost Camera Config.File
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Unqualified:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=dd,
n Mod.Name=dd, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1024, Lines=1024, Parity=Odd, Timer=10, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Unqualified:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=dd,
n Mod.Name=dd, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1024, Lines=1024, Parity=Odd, Timer=10, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Requirements: Digital Diagnost v1.1, Merge DPI v2.4, 190 rel. 1.7.29
Philips Digital Diagnost Setup:
n on Digital Diagnost into System/Service/Configuration:
- ItemName=SystemOptions check OptHCU=Yes
- ItemName=Unstructured Items/printerAttached check Value=Yes
- ItemName=Imager Definitions verify DPI is defined
- ItemName=SiteInformation set Preferred Printer=DPI
Merge DPI Setup:
n into usr/home/merge/xpi/config/xpi_digital_952.ini under [HOST_PORT] set:
- BAUD=1200, PARITY=EVEN, DATA_BITS=8, STOP_BITS=1
- RS_232_422=RS-422, DTE_DCE=DTE
n into usr/home/merge/xpi/config/xpi_digital_952.ini under [MACH] set: PARITY=ODD
n into usr/home/merge/xpi/config/xpi_digital_952.ini under [SC] set: ACQ_TYPE=DI
n into /etc/hosts set: IP addr. of 190=NER_ANY
n into usr/home/merge/xpi/config/targets.ini under [TARGET_2] set:
- NAME=190, ADDRESS=NER_ANY, PROTOCOL=DICOM BASIC PRINT
- FORMAT_FILE=default.fm, DEFAULT=YES
n into usr/home/merge/xpi/config/tk_app.ini under [NER_ANY] set:
- PORT_NUMBER=5040, HOST_NAME=NER_ANY
- SERVICE_LIST=MergeXPI_Service_List
n into usr/home/merge/xpi/config/dbp.ini under [SOURCE_OVERRIDE] set:
- Medium_Type=ANY, Film_Orientation=PORTRAIT
- Film_Size=14INX17IN, Magnification_Type=CUBIC
- Smoothing_Type=NORMAL, Border_Density=BLACK
- Empty_Image_Density=BLACK, Max_Density=300, Trim=NO
- Configuration_ Information=CS575\CN0\PD1.2, Polarity=NORMAL
190 Setup: On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
Fiber Cable
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
9410 PACS Link
DryView 8700 Plus
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Philips Digital Diagnost Setup:
n on Digital Diagnost into System/Service/Configuration:
- ItemName=SystemOptions check OptHCU=Yes
- ItemName=Unstructured Items/printerAttached check Value=Yes
- ItemName=Imager Definitions verify DPI is defined
- ItemName=SiteInformation set Preferred Printer=DPI
Merge DPI Setup:
n into usr/home/merge/xpi/config/xpi_digital_952.ini under [HOST_PORT] set:
- BAUD=1200, PARITY=EVEN, DATA_BITS=8, STOP_BITS=1
- RS_232_422=RS-422, DTE_DCE=DTE
n into usr/home/merge/xpi/config/xpi_digital_952.ini under [MACH] set: PARITY=ODD
n into usr/home/merge/xpi/config/xpi_digital_952.ini under [SC] set: ACQ_TYPE=DI
n into /etc/hosts set: IP addr. of 9410=IMN_9410
n into usr/home/merge/xpi/config/targets.ini under [TARGET_2] set:
- NAME=9410, ADDRESS=IMN_9410, PROTOCOL=DICOM BASIC PRINT
- FORMAT_FILE=default.fm, DEFAULT=YES
n into usr/home/merge/xpi/config/tk_app.ini under [IMN_9410] set:
- PORT_NUMBER=1024, HOST_NAME=IMN_9410
- SERVICE_LIST=MergeXPI_Service_List
n into usr/home/merge/xpi/config/dbp.ini under [SOURCE_OVERRIDE] set:
- Film_Destination=PROCESSOR, Film_Orientation=PORTRAIT
- Film_Size=14INX17IN, Magnification_Type=CUBIC, Smoothing_Type=11
- Border_Density=BLACK, Empty_Image_Density=BLACK, Max_Density=300
- Trim=NO, Configuration_ Information=LUT=0,9 , Polarity=NORMAL
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title=IMN_9410, Port=1024, Max Associations=5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=MERGE_XPI1, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
RS422
Control 9-pin 9-pole Plug
COPCIL Board
Philips Philips 37-pin RS422 37-to-25 pin Merge DPI
Copper Cable
Digital Diagnost Control Cable Merge Adaptor Cable
Merge Comm Board
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title=IMN_9410, Port=1024, Max Associations=5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=MERGE_XPI1, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=4 i.e.,575 (Always=N), Contrast (wet)=0 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
n Formatting: Pixel Pitch=12.6582
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=4 i.e.,575 (Always=N), Contrast (wet)=0 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.5
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=4 i.e.,575 (Always=N), Contrast (wet)=0 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Requirements: Philips Digital Diagnost v1.1, Merge DPI rel. 2.4, MIM200 v6.1, 8200 v3.5
Note: This setup is basically also valid for 25 PS computer
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
DICOM Network
Fiber Cable
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Kodak MIM 200
Kodak DryView 8700 Plus
MIM200 Setup:
n on Configure, Network
n Node=MIM, IPAddr=accordingly, Subnet=accordingly, Gateway=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=11 (Always=N)
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
RS422
Control 9-pin 9-pole Plug
COPCIL Board
Philips Philips 37-pin RS422 37-to-25 pin Merge DPI
Copper Cable
Digital Diagnost Control Cable Merge Adaptor Cable
Control 422OUT Merge Comm Board
Requirements: Philips Digital Diagnost v1.1, Merge DPI rel. 2.4, MIM200 v6.1, 8100 v2.4.1
Note: This setup is basically also valid for 25 PS computer
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
DICOM Network
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
DICOM Network
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Kodak DryView 8150
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
DICOM Network
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
5
setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Fiber Cable
Fiber Cable
ger
Mana
nput
ulti-I
0M
880
3M
yView
00 Dr
3M 87
Fiber Cable
8700 Dual
8800 MIM
Requirements: V3000 rel. 4.3.3, 8800 rel. 4.2, 8700 rel. 1.15
Setup:
n on Philips V3000 rel. 4.3.3 install Camera Config.File 3M M952
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
yView
00 Dr
3M 87
8700 Plus
Setup:
n on Philips V3000 rel. 4.3.3 install Camera Config.File 3M M952
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8700 Standard
Data Cable
I mage Data OUT
n on TDB/C board:
n Jumpers=RS422, Switch=Center
n on COMM Menu:
n 959 Default
n on IMAGE Menu:
n TFT=PMSV3K, Dmax=3.00, Contrast=15, Density=14
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n on SYSTEM Menu:
n Memory Management=First Fit
n on EIB Menu:
n Parity=Enable Odd, Timeout=10
Fiber Cable
Fiber Cable
ger
Mana
nput
ulti-I
0M
880
3M
yView
00 Dr
3M 87
Fiber Cable
8500 Dual
8800 MIM
Requirements: V3000 rel. 4.3.3, 8800 rel. 5.1, 8500 rel. 1.22
Setup:
n on Philips V3000 rel. 4.3.3 install Camera Config.File 3M M952
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
yView
00 Dr
3M 87
8500 Plus
Setup:
n on Philips V3000 rel. 4.3.3 install Camera Config.File 3M M952
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8500 Standard
Data Cable
I mage Data OUT
Setup:
n on Philips V3000 rel. 4.3.3 install Camera Config.File 3M M952
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
8300 Dual
er
nag
ut Ma
lti-Inp
00 Mu
8800 MIM
Requirements: V3000 rel. 4.3.3, 8800 rel. 5.1, 8300 rel. 4.2
Setup:
n on Philips V3000 rel. 4.3.3 install Camera Config.File 3M M952
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8300 Setup:
n on 8300 Operator Menu set:
n Film Layout: Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=None
n Modality Group=0
8800 Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: Density=16, Contrast=10
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n on EIB Menu: Parity=Enable Odd, Timeout=10
8300
Philips 37-pin RS422 37-to-9 pin
Philips V3000
Control Cable Host Adaptor Cable
Host Control 422 OUT
Setup:
n on Philips V3000 rel. 4.3.3 install Camera Config.File 3M M952
8300 Setup:
n on 8300 Operator Menu set:
n Density=16
n Contrast=10
n Film Layout: Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=Odd
n Modality Group=0
Fiber Cable
Fiber Cable
3 M H Q L a ser Im ag er
M969 HQ
Setup:
n on Philips V3000 rel. 4.3.3 install Camera Config.File 3M M952
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
M969 HQ Setup:
n on COMM Menu:
n 959 Default
n on IMAGE Menu:
n TFT=PMSV3K, Dmax=3.00, Contrast=15, Density=14
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n on EIB Menu:
n Parity=Enable Odd, Timeout=10
M969 HQT
Philips 37-pin RS422 37-to-9 pin
Philips V3000 Host Adaptor Cable
Control Cable
Host Control 422 OUT 3 M H Q L a s er Im a g e r
Philips 37-pin
Data Cable
I mage Data OUT
Setup:
n on Philips V3000 rel. 4.3.3 install Camera Config.File 3M M952
Fiber Cable
Fiber Cable
3 M L a s e r I m a g er
M959 XL
Setup:
n on Philips V3000 rel. 4.3.3 install Camera Config.File 3M M952
n on XL Control Panel set Density & Contrast depending on chemistry
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
n on XL Input Module install LUT 322A0
M959 XL Setup:
n on COMM Menu: 959 Default
n on EIB Menu: Parity=Enable Odd, Timeout=10
DryView 8100
RS422 9-pole
Philips 37-pin RS422 37-to-9 pin plug
Philips V3000 Host Adaptor Cable
Control Cable
Host Control 422 OUT
Philips 37-pin
Data Cable
Image Data OUT
DPI4-to-DPC Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=Kodak Ektascan 100, HCU=Laser
n cycle power V3000
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Integris V/H DF:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=v3000,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1280, Lines=960, Parity=Odd, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 2400, RS422, 8, 1, None
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=Kodak Ektascan 100, HCU=Laser
n cycle power V3000
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Integris V/H DF:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=v3000,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1280, Lines=960, Parity=Odd, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 2400, RS422, 8, 1, None
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=Kodak Ektascan 100, HCU=Laser
n cycle power V3000
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Integris V/H DF:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=v3000,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1280, Lines=960, Parity=Odd, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 2400, RS422, 8, 1, None
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
Fiber Cable
Host Control 422 OUT
RS422 37-to-50 pin
Philips 37-pin Fiber Cable
Digital Adaptor Cable
Data Cable
Image Data OUT
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM 200 Destinations
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Integris V/H DF:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=v3000,
n Mod.Name=v3000, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1280, Lines=960, Parity=Odd, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
Note: same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Integris V/H DF:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=v3000,
n Mod.Name=v3000, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1280, Lines=960, Parity=Odd, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
DICOM Network
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Kodak DryView 8300
Note: same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
DICOM Network
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Requirements: Philips V3000 rel. 4.3.3, Merge DPI v2.4, 190 rel. 1.7.29
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
Fiber Cable
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
9410 PACS Link
DryView 8700 Plus
Requirements: Philips V3000 rel. 4.3.3, Merge DPI rel. 2.2, 9410 v1.6, 8700 v1.34
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
Merge DPI Setup:
n into usr/home/merge/xpi/config/xpi_digital_952.ini under [HOST_PORT] set:
- BAUD=1200, PARITY=EVEN, DATA_BITS=8, STOP_BITS=1
- RS_232_422=RS-422, DTE_DCE=DTE
n into usr/home/merge/xpi/config/xpi_digital_952.ini under [MACH] set: PARITY=ODD
n into usr/home/merge/xpi/config/xpi_digital_952.ini under [SC] set: ACQ_TYPE=DI
n into /etc/hosts set: IP addr. of 9410=IMN_9410
n into usr/home/merge/xpi/config/targets.ini under [TARGET_2] set:
- NAME=9410, ADDRESS=IMN_9410, PROTOCOL=DICOM BASIC PRINT
- FORMAT_FILE=default.fm, DEFAULT=YES
n into usr/home/merge/xpi/config/tk_app.ini under [IMN_9410] set:
- PORT_NUMBER=1024, HOST_NAME=IMN_9410
- SERVICE_LIST=MergeXPI_Service_List
n into usr/home/merge/xpi/config/dbp.ini under [SOURCE_OVERRIDE] set:
- Film_Destination=PROCESSOR, Film_Orientation=PORTRAIT
- Film_Size=14INX17IN, Magnification_Type=CUBIC, Smoothing_Type=11
- Border_Density=BLACK, Empty_Image_Density=BLACK, Max_Density=300
- Trim=NO, Configuration_ Information=LUT=0,15 , Polarity=NORMAL
RS422
Control 9-pin 9-pole Plug
COPCIL Board
Philips 37-pin RS422 37-to-25 pin Merge DPI
Philips V3000 Copper Cable
Control Cable Merge Adaptor Cable
Control 422OUT Merge Comm Board
Requirements: Philips V3000 rel. 4.3.3, Merge DPI rel. 2.2, 9410 v1.6, 8100 v2.4.1
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
Control 9-pin
COPCIL Board
Philips V3000 Philips 37-pin RS422 37-to-25 pin Merge DPI
Copper Cable
Control Cable Merge Adaptor Cable
Control 422OUT Merge Comm Board
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e.,Auto
n on Operator Menu set: Film Layout: 1 on 1=Landscape, 2:1L, 4:1L
n Note: due to V3000 matrix 1024x1280, 4:1 allowed only with Film Layout: 4:1L
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
Note: Same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
Fiber Cable
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Kodak MIM 200
Kodak DryView 8700 Plus
RS422
Control 9-pin 9-pole Plug
COPCIL Board
Philips 37-pin RS422 37-to-25 pin Merge DPI
Philips V3000 Copper Cable
Control Cable Merge Adaptor Cable
Merge Comm Board
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
MIM200 Setup:
n on Configure, Network:
Control 9-pin
COPCIL Board
Philips V3000 Philips 37-pin RS422 37-to-25 pin Merge DPI
Copper Cable
Control Cable Merge Adaptor Cable
Control 422OUT Merge Comm Board
V3000 Setup:
n on service terminal press shift-s during booting to enter the Service Mode
n on Service software select 2 (Servicesoftware) / Run / Config / Hardware
n set: Remote control HCU=3M M952, HCU=Laser
n cycle power V3000
DICOM Network
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Kodak DryView 8900
Note: same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
- on service terminal press shift-s during booting to enter the Service Mode
- on Service software select 2 (Servicesoftware) / Run / Config / Hardware
- set: Remote control HCU=3M M952, HCU=Laser
- cycle power V3000
8900 Setup:
DICOM Network
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Kodak DryView 8150
Note: same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
- on service terminal press shift-s during booting to enter the Service Mode
- on Service software select 2 (Servicesoftware) / Run / Config / Hardware
- set: Remote control HCU=3M M952, HCU=Laser
- cycle power V3000
8150 Setup:
DICOM Network
Note: same setup valid for Integris H/V2000, H/V3000, H/V4000, H/V5000
V3000 Setup:
- on service terminal press shift-s during booting to enter the Service Mode
- on Service software select 2 (Servicesoftware) / Run / Config / Hardware
- set: Remote control HCU=3M M952, HCU=Laser
- cycle power V3000
OEM Data
Manufacturer Philips
Modality DSA
Model Allura Xper
sw version FD20
Implement. Class UID 1.3.46.670589.7.28.2.0.1
Implement. Version Name AlluraXper20ACP
Kodak Data
DICOM-interface MIM internal / external or 9410 as below reported
DICOM-intf sw version as below reported
Printer model All cameras as below reported
Printer sw version as below reported
What’s new:
The setup of a Kodak printer for a given OEM Modality was split in 2 separate documents:
Therefore, as first step, setup the printer as per the correspondent page of the Setup Catalog for Kodak Cameras
(ie go to the Setup Catalog doc and do that first, then come back
here and finish install as per this Specific Setup Manual doc).
Therefore, as second and final step, setup the printer as per the indications reported here into the Setup Manual
for that particular OEM Modality.
Note that the Setup Manual has 2 sections ie the DryView section and the Wet section.
Note: MIM setup is basically also valid for 9410 by using AE=9410, Port=1024
Note: for each DryView camera select into the Modality the correspondent Prototype,
in particular for 8900 choose the Kodak 8900 standard,
in particular for CMI1000 choose the Kodak CMI1000 or Codonics 1660MD.
DryView section:
Setup for Kodak DryView cameras ie
8900, 8700, 8610, 8600, 8500, 8300, 8200, 8150, 8100, 1000
Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic,
ie common to all DICOM connections independently from the Specific modality connected.
Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup
Catalog, and then, as second and final step, setup the Image Quality parameters as per the
Setup Manual for the Specific OEM Modality here below reported.
MIM external 8700, 8500 8100 8300 8610 (8600) 8200 1000
into Kodak catalog 15 16 17 18 14 21
see Setup as per page
MIM sw version 6.1 6.1 6.1 6.1 6.1 2.0.b3
Printer sw version 1.34 2.4.1 3.5 2.4 (2.5) 4.9.1 1.0.b8
Image Quality setup into MIM (or 9410) for DryView cameras:
Which are the Image Quality parameters sent out by the OEM Modality:
DICOM Sent out by Value sent out for Value sent out Value sent out
Parameters Modality 8900, 8150, 8700, for 8300 for 8610, 8600
(Yes/No) 8500, 8200, 8100,
1000
Config. Information Yes LUT=0,9 LUT=0,10 LUT=0,3
(LUT=TFT,Contrast)
Max. Density Yes 300 300 300
Magnification Yes NONE NONE NONE
Smoothing No
PLUT No
Illumination (PLUT) No
Reflective Ambient No
Light (PLUT)
Wet section:
Setup for Kodak Wet cameras ie 160, 2180, 1120, 190
Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic,
ie common to all DICOM connections independently from the Specific modality connected.
Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup
Catalog, and then, as second and final step, setup the Image Quality parameters as per the
Setup Manual for the Specific OEM Modality here below reported.
Note: in regards to 969 parameters use the same as per 8700 setup.
Image Quality setup into MIM (or 190) for Wet cameras:
Note: reported setup was tested eg for 160 and tentatively is valid also for other cameras ie
2180, 1120, 190.
Which are the Image Quality parameters sent out by the OEM Modality:
DICOM Sent out by Value sent out for
Parameters Modality 160, 2180, 1120,
(Yes/No) 190
Config. Information Yes CS435\CN0
(CurveShape\Contrast)
Max. Density Yes 300
Magnification Yes NONE
Smoothing No
PLUT No
Illumination (PLUT) No
Reflective Ambient No
Light (PLUT)
Miscellaneous:
Notes:
Connection POINT-TO-POINT:
n Kodak DryView 8800 MULTI-INPUT MANAGER /
Kodak DryView 8700 LASER IMAGER / Dual.............................................................. 3
n Kodak DryView 8700 LASER IMAGER / Plus............................................................... 4
n Kodak DryView 8700 LASER IMAGER / Standard ....................................................... 5
n Kodak DryView 8800 MULTI-INPUT MANAGER /
Kodak DryView 8500 LASER IMAGER / Dual.............................................................. 6
n Kodak DryView 8500 LASER IMAER / Plus ................................................................. 7
n Kodak DryView 8500 LASER IMAGER / Standard ....................................................... 8
n Kodak DryView 8800 MULTI-INPUT MANAGER /
Kodak DryView 8300 LASER IMAGER / Dual.............................................................. 9
n Kodak DryView 8300 LASER IMAGER / Standalone.................................................... 10
n Kodak Digital Science 969 HQ LASER IMAGER...................................................... 11
n Kodak Digital Science 969 HQT LASER IMAGER ................................................... 12
n Kodak Digital Science 959 XL LASER IMAGER ...................................................... 13
n Kodak DryView 8100 LASER IMAGER......................................................................... 14
n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 15
n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER (1).................................................................... 17
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 19
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 21
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 23
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) . 25
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER (4).................................................................... 27
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
5
setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Fiber Cable
Fiber Cable
ger
Mana
nput
ulti-I
0M
880
3M
yView
00 Dr
3M 87
Fiber Cable
8700 Dual
8800 MIM
Requirements: DSI rel. R4.2.1, 8800 rel. 4.2, 8700 rel. 1.15
Setup:
n on Philips DSI rel. R4.2.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
yView
00 Dr
3M 87
8700 Plus
Setup:
n on Philips DSI rel. R4.2.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8700 Standard
Data Cable
I mage Data OUT
Fiber Cable
Fiber Cable
ger
Mana
nput
ulti-I
0M
880
3M
yView
00 Dr
3M 87
Fiber Cable
8500 Dual
8800 MIM
Requirements: DSI rel. R4.2.1, 8800 rel. 5.1, 8500 rel. 1.22
Setup:
n on Philips DSI rel. R4.2.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
yView
00 Dr
3M 87
8500 Plus
Setup:
n on Philips DSI rel. R4.2.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8500 Standard
Data Cable
I mage Data OUT
Setup:
n on Philips DSI rel. R4.2.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
8300 Dual
er
nag
ut Ma
lti-Inp
00 Mu
8800 MIM
Requirements: DSI rel. R4.2.1, 8800 rel. 5.1, 8300 rel. 4.2
Setup:
n on Philips DSI rel. R4.2.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8300 Setup:
n on 8300 Operator Menu set:
n Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=None
n Modality Group=0
8800 Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: Density=16, Contrast=10
n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes
n on EIB Menu: Parity=Enable Odd, Timeout=10
8300
Philips 37-pin RS422 37-to-9 pin
Philips DSI
Control Cable Host Adaptor Cable
Host Control 422 OUT
Setup:
n on Philips DSI rel. R4.2.1 install Camera Config.File 3M
8300 Setup:
n on 8300 Operator Menu set:
n Density=16
n Contrast=10
n Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=Odd
n Modality Group=0
Fiber Cable
Fiber Cable
3 M H Q L a ser Im ag er
M969 HQ
Setup:
M969 HQ Setup:
n on COMM Menu:
n 959 Default
n on IMAGE Menu:
n TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n on EIB Menu:
n Parity=Enable Odd, Timeout=10
M969 HQT
Philips 37-pin RS422 37-to-9 pin
Philips DSI Host Adaptor Cable
Control Cable
Host Control 422 OUT 3 M H Q L a s er Im a g e r
Philips 37-pin
Data Cable
I mage Data OUT
Setup:
n on Philips DSI rel. R4.2.1 install Camera Config.File 3M
Fiber Cable
Fiber Cable
3 M L a s e r I m a g er
M959 XL
Setup:
n on Philips DSI rel. R4.2.1 install Camera Config.File 3M
n on XL Control Panel set Density & Contrast depending on chemistry
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
n on XL Input Module install LUT 322A0
M959 XL Setup:
n on COMM Menu:
n 959 Default
n on EIB Menu:
n Parity=Enable Odd, Timeout=10
DryView 8100
RS422 9-pole
Philips 37-pin RS422 37-to-9 pin plug
Philips DSI Host Adaptor Cable
Control Cable
Host Control 422 OUT
Philips 37-pin
Data Cable
Image Data OUT
DPI4-to-DPC Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=10, Parity=Odd, Memory=7
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=dsi, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=Kodak,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=DSI DF 50Hz:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=dsi,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1280, Lines=1024, Parity=Odd, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 2400, RS422, 8, 1, None
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=Kodak,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=DSI DF 50Hz:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=dsi,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1280, Lines=1024, Parity=Odd, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 2400, RS422, 8, 1, None
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=Kodak,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=DSI DF 50Hz:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=dsi,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1280, Lines=1024, Parity=Odd, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 2400, RS422, 8, 1, None
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
Fiber Cable
Host Control 422 OUT
RS422 37-to-50 pin
Philips 37-pin Fiber Cable
Digital Adaptor Cable
Data Cable
Image Data OUT
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM 200 Destinations
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=DSI DF 50Hz:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=dsi,
n Mod.Name=dsi, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1280, Lines=1024, Parity=Odd, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:
n into Machine Setup Menu set: Tonescaling=Perception LUT
n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup
n Select Destination=8700, Media Size Select=35x43
n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:
n Orientation=P, Copies=01, Smoothing Type=11, Film Contrast=9
n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On
n TFT/ULUT=Pmsv3k.w87, Auto Study=Off, Console=On, Annotation=Off
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=DSI DF 50Hz:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=dsi,
n Mod.Name=dsi, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1280, Lines=1024, Parity=Odd, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
DICOM Network
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Kodak DryView 8300
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=0 i.e., Auto
DICOM Network
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Requirements: Philips DSI rel. 4.2.1, Merge DPI v2.4, 190 rel. 1.7.29
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
Fiber Cable
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
9410 PACS Link
DryView 8700 Plus
Requirements: Philips DSI rel. 4.2.1, Merge DPI rel. 2.2, 9410 v1.6, 8700 v1.34
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title=IMN_9410, Port=1024, Max Associations=5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No, Print Always=Yes
n Contrast Test Mode=No, Contrast Test Mode Density=0
RS422
Control 9-pin 9-pole Plug
COPCIL Board
Philips DSI Philips 37-pin RS422 37-to-25 pin Merge DPI
Copper Cable
Control Cable Merge Adaptor Cable
Control 422OUT Merge Comm Board
Requirements: Philips DSI rel. 4.2.1, Merge DPI rel. 2.2, 9410 v1.6, 8100 v2.4.1
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title=IMN_9410, Port=1024, Max Associations=5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, Contrast Group=0
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Req.Image Size=0, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No, Print Always=Yes
n Contrast Test Mode=No, Contrast Test Mode Density=0
Control 9-pin
COPCIL Board
Philips DSI Philips 37-pin RS422 37-to-25 pin Merge DPI
Copper Cable
Control Cable Merge Adaptor Cable
Control 422OUT Merge Comm Board
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type =831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title=IMN_9410, Port=1024, Max Associations=5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No, Print Always=Yes
n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto
n on Operator Menu set: Film Layout: 1 on 1=Landscape, 2:1L, 4:1L
n Note: due to DSI matrix 1024x1280, 4:1 allowed only with Film Layout: 4:1L
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=3 i.e., 435 (Always=N), Contrast (wet)=0 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
n Formatting: Pixel Pitch=12.6582
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N)
n Negotiate Color Print=Off
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.5
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
n Supported Item: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnification=On, Bilin=On, Repl=On
n Interpolation: Cubic Spline=On, Cubic Convolution 2=On
n Format Types: Custom=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n SCU: Density Space=On, Variable Border=On, PLUT Service=On
n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=11 (Always=N)
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
DICOM Network
Fiber Cable
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Kodak MIM 200
Kodak DryView 8700 Plus
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
RS422
Control 9-pin 9-pole Plug
COPCIL Board
Philips DSI Philips 37-pin RS422 37-to-25 pin Merge DPI
Copper Cable
Control Cable Merge Adaptor Cable
Control 422OUT Merge Comm Board
DSI Setup:
n on DSI press F4 and select Service, Start Service Mode
n on TCOP software select 2 (Testsoftware) / Run / Config / HCU
n set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
n HCU with remote control=yes, filmsize=17x14, film feedback=yes
n cycle power DSI
MIM200 Setup:
n on Configure, Network:
Control 9-pin
COPCIL Board
Philips DSI Philips 37-pin RS422 37-to-25 pin Merge DPI
Copper Cable
Control Cable Merge Adaptor Cable
Control 422OUT Merge Comm Board
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=11.9048
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3
n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT=u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=2 (Always=N)
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Kodak DryView 8900
DSI Setup:
- on DSI press F4 and select Service, Start Service Mode
- on TCOP software select 2 (Testsoftware) / Run / Config / HCU
- set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
- HCU with remote control=yes, filmsize=17x14, film feedback=yes
- cycle power DSI
8900 Setup:
n on Configuration, System, Network:
DICOM Network
Philips 37-pin
Data Cable
Image Data OUT Merge Data Board
Kodak DryView 8150
DSI Setup:
- on DSI press F4 and select Service, Start Service Mode
- on TCOP software select 2 (Testsoftware) / Run / Config / HCU
- set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
- HCU with remote control=yes, filmsize=17x14, film feedback=yes
- cycle power DSI
8150 Setup:
n on Configuration, System, Network:
DICOM Network
Philips 37-pin
Data Cable Kodak CMI 1000
Image Data OUT Merge Data Board
DSI Setup:
- on DSI press F4 and select Service, Start Service Mode
- on TCOP software select 2 (Testsoftware) / Run / Config / HCU
- set: HCU board=yes, hardcopy=local copy, HCU protocol=3M,
- HCU with remote control=yes, filmsize=17x14, film feedback=yes
- cycle power DSI
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
n under More Quality Settings:
n Tonescaling=Presentation LUT (Always=N),
n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N)
n Smoothing=11 (Always=N), Polarity=Positive (Always=N)
n Interpolation=CUBIC (Always=N), Trim=No (Always=N)
n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults:
n Media Size=8.5x11 (Always=N), don’t care, this field plays no role
n Image Resizing=Minify (Always=N),
n Priority=Normal (Always=N), NeventReports=No (Always=Y),
n Warnings=Yes, Color=Yes
n (set Color=No when only b/w images are printed and set it to be sure
n to apply to the b/w images the Greyscale Image Quality settings)
n Page Annotation:
n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
Philips MR Infinion
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description=8300,
n Remote AE=8300, Remote Host=IPaddr.accordingly, Port=104, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config=LUT=0,10
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=8300, Format=6 on 1
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=0
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description=190,
n Remote AE=190, Remote Host=IPaddr.accordingly, Port=5040, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config= CS435\CN0
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=190, Format=20 on 1
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
iew
00 DryV
3M 87
Philips MR Infinion
Fiber Cable
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=9410, Remote description=8700,
n Remote AE=9410, Remote Host=IPaddr.accordingly, Port=1024, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config=LUT=Pmsv3k.w87,9
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=8700, Format=20 on 1
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips MR Infinion
Data 37-pin
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=9410, Remote description=8100,
n Remote AE=9410, Remote Host=IPaddr.accordingly, Port=1024, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config=LUT=Pmsv3k.w87,9
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=8100, Format=20 on 1
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
DICOM Network
Control 9 pin
Philips MR Infinion COPCIL board
Copper Cable
Data 37 pin
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=9410, Remote description=8300,
n Remote AE=9410, Remote Host=IPaddr.accordingly, Port=1024, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config=LUT=0,10
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=8300, Format=6 on 1
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips MR Infinion
Kodak 160 camera
Crossed
Network Cable
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description=160,
n Remote AE=160, Remote Host=IPaddr.accordingly, Port=5040, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config= CS435\CN0
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=160, Format=20 on 1
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
DICOM Network
Philips MR Infinion
Kodak 2180 camera
Fiber Cable
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description=2180,
n Remote AE=2180, Remote Host=IPaddr.accordingly, Port=5040, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config= CS435\CN0
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=2180, Format=20 on 1
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
n Formatting: Pixel Pitch=12.6582
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic, Modality=OT (Always=N)
n Border=3.99 (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N)
n Negotiate Color Print=Off
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips MR Infinion
Kodak 1120 camera
Fiber Cable
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description=1120,
n Remote AE=1120, Remote Host=IPaddr.accordingly, Port=5040, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config= CS435\CN0
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=1120, Format=20 on 1
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.5
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic, Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Philips MR Infinion
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description=8200,
n Remote AE=8200, Remote Host=IPaddr.accordingly, Port=5040, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config=LUT=Pmsv3k.w87,9
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=8200, Format=20 on 1
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
n Supported Item: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnification=On, Bilin=On, Repl=On
DICOM Network
iew
00 DryV
3M 87
Philips MR Infinion
Fiber Cable
Fiber Cable
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description=8700,
n Remote AE=8700, Remote Host=IPaddr.accordingly, Port=5040, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config=LUT=Pmsv3k.w87,9
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=8700, Format=20 on 1
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips MR Infinion
Data 37-pin
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description=8100,
n Remote AE=8100, Remote Host=IPaddr.accordingly, Port=5040, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config=LUT=Pmsv3k.w87,9
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=8100, Format=20 on 1
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
DICOM Network
Control 9 pin
Philips MR Infinion COPCIL board
Copper Cable
Data 37 pin
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description=8300,
n Remote AE=8300, Remote Host=IPaddr.accordingly, Port=5040, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config=LUT=0,10
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=8300, Format=6 on 1
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips MR Infinion
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description=8900,
n Remote AE=8900, Remote Host=IPaddr.accordingly, Port=5040, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config=LUT=Pmsv3k.w87,9
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=8900, Format=20 on 1
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
DICOM Network
Philips MR Infinion
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description=8150,
n Remote AE=DV8150, Remote Host=IPaddr.accordingly, Port=5040, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config=LUT=Pmsv3k.w87,9
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera=8150, Format=20 on 1
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2
n Formatting: Min Vert Sep=2, Trim Width Enabled=2
n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:
n Negotiate Presentation LUT=No, Negotiate Color Print=No,
n TFT Set Name=Pmsb.w87 (Always=Y)
n Contrast=9 (Always=N), Smoothing Type=2 (Always=N)
n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N)
n Image Polarity=Normal (Always=N)
n NeventReports=No (Always=Y), Warnings=Yes
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
n 2mm Border=Yes, Film Clip Border=No,
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No,
n Modality ID=No, Annotation Override=No, Density Patch=No
n Image Resizing=Minify/Scale (Always=N),
n Text Box Location=None, Source ID=mr
DICOM Network
Philips MR Infinion
MR Infinion Setup:
n login as service to go to Unix level
n at Unix level type: cd /Picker/commands
n at Unix level type: dicom_manager, click OK, click New
n set Manufacturer=Kodak, Model=190, Remote description= CMI1000,
n Remote AE= CMI1000, Remote Host=IPaddr.accordingly, Port=5040, PDU=4
n click Previous, under DICOM Print SCU set Min.Density=20,
n Max.Density=300, Manufacturer’s Config=LUT=Pmsv3k.w87,9
n click Save, click Yes, click Exit, click OK
n at Unix level type: logout
n enter MR Application, select Film, set Camera= CMI1000, Format=6 on 1
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
n under More Quality Settings:
n Tonescaling=Presentation LUT (Always=N),
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
5
setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Philips MR NT with
Kodak DryView 8800 MULTI-INPUT MANAGER /
Kodak DryView 8700 LASER IMAGER / Dual
Fiber Cable
Fiber Cable
ger
ana
putM
ulti-In
0M
880
3M
iew
0 DryV
3M 870
Fiber Cable
8700 Dual
8800 MIM
Setup:
n on Philips MR NT rel. 4.5 install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Philips MR NT with
Kodak DryView 8700 LASER IMAGER / Plus
Fiber Cable
Fiber Cable
iew
0 DryV
3M 870
8700 Plus
Setup:
n on Philips MR NT rel. 4.5 install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Philips MR NT with
Kodak DryView 8700 LASER IMAGER / Standard
8700 Standard
Data Cable
I mage Data OUT
Philips MR NT with
Kodak DryView 8800 MULTI-INPUT MANAGER /
Kodak DryView 8500 LASER IMAGER / Dual
Fiber Cable
Fiber Cable
ger
ana
putM
ulti-In
0M
880
3M
iew
0 DryV
3M 870
Fiber Cable
8500 Dual
8800 MIM
Setup:
n on Philips MR NT rel. 4.5 install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Philips MR NT with
Kodak DryView 8500 LASER IMAGER / Plus
Fiber Cable
Fiber Cable
iew
0 DryV
3M 870
8500 Plus
Setup:
n on Philips MR NT rel. 4.5 install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Philips MR NT with
Kodak DryView 8500 LASER IMAGER / Standard
8500 Standard
Data Cable
I mage Data OUT
Setup:
n on Philips MR NT rel. 4.5 install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Philips MR NT with
Kodak DryView 8800 MULTI-INPUT MANAGER /
Kodak DryView 8300 LASER IMAGER / Dual
Philips 37-pin RS422 37-to-9 pin
Philips MR NT Host Adaptor Cable
Control Cable
Host Control 422 OUT Host UKEIB
Philips 37-pin
Data Cable
I mage Data OUT DEIB
Fiber Cable
Fiber Cable
8300 Dual
r
age
Man
put
ulti-In
Fiber Cable
00M
3M88
8800 MIM
Philips MR NT with
Kodak DryView 8300 LASER IMAGER / Standalone
8300
Philips 37-pin RS422 37-to-9 pin
Philips MR NT
Control Cable Host Adaptor Cable
Host Control 422 OUT
Setup:
n on Philips MR NT rel. 4.5 install Camera Config.File 3M +
8300 Setup:
n on 8300 Operator Menu set:
n Density=16
n Contrast=10
n Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=Even
n Modality Group=0
Philips MR NT with
Kodak Digital Science 969 HQ LASER IMAGER
Fiber Cable
Fiber Cable
3 M H Q L a ser Im a g er
M969 HQ
Setup:
n on Philips MR NT rel. 4.5 install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
M969 HQ Setup:
n on COMM Menu:
n 959 Default
n on IMAGE Menu:
n TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n on EIB Menu:
n Parity=Enable Even, Timeout=60
Philips MR NT with
Kodak Digital Science 969 HQT LASER IMAGER
M969 HQT
Philips 37-pin RS422 37-to-9 pin
Philips MR NT Host Adaptor Cable
Control Cable
Host Control 422 OUT 3 M H Q L a ser Im ag er
Philips 37-pin
Data Cable
I mage Data OUT
Setup:
n on Philips MR NT rel. 4.5 install Camera Config.File 3M +
Philips MR NT with
Kodak Digital Science 959 XL LASER IMAGER
Fiber Cable
Fiber Cable
3 M L a se r I m ag er
M959 XL
Setup:
n on Philips MR NT rel. 4.5 install Camera Config.File 3M +
n on XL Control Panel set Density & Contrast depending on chemistry
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
n on XL Input Module install LUT 322A0
M959 XL Setup:
n on COMM Menu:
n 959 Default
n on EIB Menu:
n Parity=Enable Even, Timeout=60
Philips MR NT with
Kodak DryView 8100 LASER IMAGER
RS422 9-pole
Philips 37-pin RS422 37-to-9 pin plug
Philips MR NT Host Adaptor Cable
Control Cable
Host Control 422 OUT
Philips 37-pin
Data Cable
Image Data OUT
DryView 8100
Philips MR NT with
Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus
(see also 8800/8700 Dual and HQ)
DPI4-to-DPC Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Setup:
n on MR NT rel. 4.5 install Camera Config.File 3M+
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=60, Parity=Even, Memory=10
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=mrnt, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
Philips MR NT with
Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER
Philips 37-pin RS422 37-to-9 pin
Philips MR NT Host Adaptor Cable
Control Cable
Host UKEIB
Host Control 422 OUT Imager
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=60, Parity=Even, Memory=10
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=mrnt, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On
n TFT/ULUT=Pmsb.w87, Mem.Full =On, Image Size =On, Alarm Mode=On
n into Defaults: Destination=Printer 1, Media Size=14x17, C=9, D=14
MR NT / Intera with
Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER
Kpad / Host Control
RS422 37-to-15 pin
Philips MR NT / Intera Philips 37-pin Octopus Adaptor Cable
Control Adaptor Cable
Control Cable
Crossed Kodak 160 camera
Host Control 422 OUT
Network Cable
RS422 37-to-50 pin
Philips 37-pin
Digital Adaptor Cable
Data Cable
Image Data OUT
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Gyroscan NT-5/10/15:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=mrnt,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=720, Lines=528, Parity=Even, Timer=5, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 9600, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
MR NT / Intera with
Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER
Kpad / Host Control
RS422 37-to-15 pin
Philips MR NT / Intera Philips 37-pin Octopus Adaptor Cable
Control Adaptor Cable
Control Cable
Kodak 2180 camera
Host Control 422 OUT
Fiber Cable
RS422 37-to-50 pin
Philips 37-pin
Digital Adaptor Cable
Data Cable
Image Data OUT
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Gyroscan NT-5/10/15:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=mrnt,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=720, Lines=528, Parity=Even, Timer=5, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 9600, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
MR NT / Intera with
Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 1120 LASER PRINTER
Kpad / Host Control
RS422 37-to-15 pin
Philips MR NT / Intera Philips 37-pin Octopus Adaptor Cable
Control Adaptor Cable
Control Cable
Kodak 1120 camera
Host Control 422 OUT
Fiber Cable
RS422 37-to-50 pin
Philips 37-pin
Digital Adaptor Cable
Data Cable
Image Data OUT
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Gyroscan NT-5/10/15:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=mrnt,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=720, Lines=528, Parity=Even, Timer=5, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 9600, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
MR NT / Intera with
Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus
(see also 8800/8700 Dual and HQ)
Fiber Cable
Host Control 422 OUT
RS422 37-to-50 pin
Philips 37-pin Fiber Cable
Digital Adaptor Cable
Data Cable
Image Data OUT
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM 200 Destinations
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Gyroscan NT-5/10/15:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=mr,
n Mod.Name=mr, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=720, Lines=528, Parity=Even, Timer=5, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
MR NT / Intera with
Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER
RS422
Kpad / Host Control 9-pole Plug
RS422 37-to-15 pin
Philips 37-pin Octopus Adaptor Cable COPCIL Board
Philips MR NT / Intera Control Adaptor Cable Control 9-pin
Control Cable Copper Cable
Host Control 422 OUT
RS422 37-to-50 pin
Philips 37-pin
Digital Adaptor Cable
Data Cable
Image Data OUT
Data 37 pin
Kodak MIM 200
Kodak DryView 8100
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Gyroscan NT-5/10/15:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=mr,
n Mod.Name=mr, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=720, Lines=528, Parity=Even, Timer=5, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4, 1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
MR NT / Intera with
Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER
Kpad / Host Control
RS422 37-to-15 pin
Philips 37-pin Octopus Adaptor Cable COPCIL Board Control 9-pin
Philips MR NT / Intera Control Adaptor Cable
Control Cable Copper Cable
Host Control 422 OUT
RS422 37-to-50 pin
Philips 37-pin
Digital Adaptor Cable
Data Cable
Image Data OUT
Data 37 pin
Kodak MIM 200
Kodak DryView 8300
Requirements: MR NT rel. 4.5, MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Gyroscan NT-5/10/15:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=nt,
n Mod.Name=nt, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=720, Lines=528, Parity=Even, Timer=5, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=11.9048
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
190 Setup:
n On 190 Control Panel press Menu, Setup:
DICOM Network
8700 Plus
Philips MR NT
Fiber Cable
iew
00 DryV
3M 87
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Note: on MR (Unix platform) only a DICOM camera could be installed
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title=9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips MR NT
Data 37-pin
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
Control 9 pin
Philips MR NT / Intera COPCIL board
Copper Cable
Data 37 pin
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
DICOM Network
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
n Formatting: Pixel Pitch=12.6582
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips MR NT / Intera
Kodak 1120 camera
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.5
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Philips MR NT / Intera
Crossed
Network Cable
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
n Supported Item: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnification=On, Bilin=On, Repl=On
n Interpolation: Cubic Spline=On, Cubic Convolution 2=On
n Format Types: Custom=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n SCU: Density Space= On, Variable Border=On, PLUT Service= On
n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=11 (Always=N), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
DICOM Network
iew
00 DryV
3M 87
Philips MR NT / Intera
Fiber Cable
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips MR NT / Intera
Data 37-pin
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
DICOM Network
Control 9 pin
Philips MR NT / Intera COPCIL board
Copper Cable
Data 37 pin
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=11.9048
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3
n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= u1_109b.w8u (Always=Y), Contrast (dry)=10 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=0 (Always=N), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N)
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips MR NT / Intera
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4
n Formatting: Min Vert Sep=4, Trim Width Enabled=4
n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:
n Negotiate Presentation LUT=No, Negotiate Color Print=No
n TFT= Pmsv3k.w87 (Always=Y), Contrast=9 (Always=Y)
n Smoothing Type=11 (Always=N), Image Polarity=Normal (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=No (Always=Y), Warnings=Yes
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
DICOM Network
Philips MR NT / Intera
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2
n Formatting: Min Vert Sep=2, Trim Width Enabled=2
n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:
n Negotiate Presentation LUT=No, Negotiate Color Print=No,
n TFT Set Name=Pmsb.w87 (Always=Y)
n Contrast=9 (Always=N), Smoothing Type=11 (Always=N)
n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N)
n Image Polarity=Normal (Always=N)
n NeventReports=No (Always=Y), Warnings=Yes
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
n 2mm Border=Yes, Film Clip Border=No,
DICOM Network
Philips MR
- NT
- Intera
- Achieva
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y),TFT Set (From list)=Pmsv3k.w87 (Always=Y)
n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
n under More Quality Settings:
n Tonescaling=Presentation LUT (Always=N),
n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N)
n Smoothing=11 (Always=N), Polarity=Positive (Always=N)
n Interpolation=CUBIC (Always=N), Trim=No (Always=N)
n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults:
n Media Size=8.5x11 (Always=N), don’t care, this field plays no role
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
Philips MR Panorama
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=DryView, Property Template=None
n Remote Host Name=IP addr. of 8300, Remote Host Port=104
n Calling AE Title=Panorama, Called AE Title=8300
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=DryView, Format=6, Copies=1
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=2
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=Kodak, Property Template=None
n Remote Host Name=IP addr. of 190, Remote Host Port=5040
n Calling AE Title=Panorama, Called AE Title=190
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=Kodak, Format=20, Copies=1
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
iew
00 DryV
3M 87
Philips MR Panorama
Fiber Cable
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=DryView, Property Template=None
n Remote Host Name=IP addr. of 9410, Remote Host Port=1024
n Calling AE Title=Panorama, Called AE Title=9410
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=DryView, Format=20, Copies=1
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips MR Panorama
Data 37-pin
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=DryView, Property Template=None
n Remote Host Name=IP addr. of 9410, Remote Host Port=1024
n Calling AE Title=Panorama, Called AE Title=9410
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=DryView, Format=20, Copies=1
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
Control 9 pin
Philips MR Panorama COPCIL board
Copper Cable
Data 37 pin
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=DryView, Property Template=None
n Remote Host Name=IP addr. of 9410, Remote Host Port=1024
n Calling AE Title=Panorama, Called AE Title=9410
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=DryView, Format=6, Copies=1
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup:
DICOM Network
Philips MR Panorama
Kodak 160 camera
Crossed
Network Cable
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=Kodak, Property Template=None
n Remote Host Name=IP addr. of MIM, Remote Host Port=5040
n Calling AE Title=Panorama, Called AE Title=160
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=Kodak, Format=20, Copies=1
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
DICOM Network
Philips MR Panorama
Kodak 2180 camera
Fiber Cable
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=Kodak, Property Template=None
n Remote Host Name=IP addr. of MIM, Remote Host Port=5040
n Calling AE Title=Panorama, Called AE Title=2180
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=Kodak, Format=20, Copies=1
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips MR Panorama
Kodak 1120 camera
Fiber Cable
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=Kodak, Property Template=None
n Remote Host Name=IP addr. of MIM, Remote Host Port=5040
n Calling AE Title=Panorama, Called AE Title=1120
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=Kodak, Format=20, Copies=1
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Philips MR Panorama
Crossed
Network
Cable
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=DryView, Property Template=None
n Remote Host Name=IP addr. of MIM, Remote Host Port=5040
n Calling AE Title=Panorama, Called AE Title=8200
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=DryView, Format=20, Copies=1
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
n Supported Item: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnification=On, Bilin=On, Repl=On
n Interpolation: Cubic Spline=On, Cubic Convolution 2=On
n Format Types: Custom=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n SCU: Density Space= On, Variable Border=On, PLUT Service= On
n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsb.w87 (Always=N), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=11 (Always=N), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
DICOM Network
iew
00 DryV
3M 87
Philips MR Panorama
Fiber Cable
Fiber Cable
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=DryView, Property Template=None
n Remote Host Name=IP addr. of MIM, Remote Host Port=5040
n Calling AE Title=Panorama, Called AE Title=8700
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=DryView, Format=20, Copies=1
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips MR Panorama
Data 37-pin
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=DryView, Property Template=None
n Remote Host Name=IP addr. of MIM, Remote Host Port=5040
n Calling AE Title=Panorama, Called AE Title=8100
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=DryView, Format=20, Copies=1
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
DICOM Network
Control 9 pin
Philips MR Panorama COPCIL board
Copper Cable
Data 37 pin
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=DryView, Property Template=None
n Remote Host Name=IP addr. of MIM, Remote Host Port=5040
n Calling AE Title=Panorama, Called AE Title=8300
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=DryView, Format=6, Copies=1
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips MR Panorama
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=DryView, Property Template=None
n Remote Host Name=IP addr. of 8900, Remote Host Port=5040
n Calling AE Title=Panorama, Called AE Title=8900
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=DryView, Format=20, Copies=1
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
DICOM Network
Philips MR Panorama
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name=DryView, Property Template=None
n Remote Host Name=IP addr. of 8150, Remote Host Port=5040
n Calling AE Title=Panorama, Called AE Title=DV8150
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera=DryView, Format=20, Copies=1
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2
n Formatting: Min Vert Sep=2, Trim Width Enabled=2
DICOM Network
Philips MR Panorama
MR Panorama Setup:
n into Tools/Options/DICOM/Printer/New set:
n Printer Name= CMI1000, Property Template=None
n Remote Host Name=IP addr. of CMI1000, Remote Host Port=5040
n Calling AE Title=Panorama, Called AE Title= CMI1000
n click OK/Close/OK/Exit (to restart)
n to print into HardCopy set Camera= CMI1000, Format=6, Copies=1
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
n under More Quality Settings:
n Tonescaling=Presentation LUT (Always=N),
n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N)
n Smoothing=11 (Always=N), Polarity=Positive (Always=N)
n Interpolation=CUBIC (Always=N), Trim=No (Always=N)
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
Philips Nuc.Med.
Odyssey
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=104, Remote Applic.Title=8300, Remote node name=MIM
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=8300,
n Printer type=Kodak MLP190, Printer’s queue name=8300
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=8300, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=0
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=5040, Remote Applic.Title=190, Remote node name=MIM
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=190,
n Printer type=Kodak MLP190, Printer’s queue name=190
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=190, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
iew
00 DryV
3M 87
Philips Nuc.Med.
Fiber Cable
Odyssey
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=1024, Remote Applic.Title=9410, Remote node name=9410
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=8700,
n Printer type=Kodak MLP190, Printer’s queue name=8700
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=8700, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips Nuc.Med.
Odyssey
Data 37-pin
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=1024, Remote Applic.Title=9410, Remote node name=9410
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=8100,
n Printer type=Kodak MLP190, Printer’s queue name=8100
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=8100, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
DICOM Network
Control 9 pin
Philips Nuc.Med. COPCIL board
Odyssey Copper Cable
Data 37 pin
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=1024, Remote Applic.Title=9410, Remote node name=MIM
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=8300,
n Printer type=Kodak MLP190, Printer’s queue name=8300
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=8300, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips Nuc.Med.
Odyssey Kodak 160 camera
Crossed
Network Cable
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=5040, Remote Applic.Title=160, Remote node name=MIM
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=160,
n Printer type=Kodak MLP190, Printer’s queue name=160
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=160, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation= Cubic, Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
DICOM Network
Philips Nuc.Med.
Kodak 2180 camera
Odyssey
Fiber Cable
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=5040, Remote Applic.Title=2180, Remote node name=MIM
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=2180,
n Printer type=Kodak MLP190, Printer’s queue name=2180
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=2180, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips Nuc.Med.
Kodak 1120 camera
Odyssey
Fiber Cable
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=5040, Remote Applic.Title=1120, Remote node name=MIM
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=1120,
n Printer type=Kodak MLP190, Printer’s queue name=1120
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=1120, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=5040, Remote Applic.Title=8200, Remote node name=MIM
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=8200,
n Printer type=Kodak MLP190, Printer’s queue name=8200
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=8200, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
DICOM Network
iew
00 DryV
3M 87
Philips Nuc.Med.
Fiber Cable
Odyssey
Fiber Cable
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=5040, Remote Applic.Title=8700, Remote node name=MIM
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=8700,
n Printer type=Kodak MLP190, Printer’s queue name=8700
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=8700, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips Nuc.Med.
Odyssey
Data 37-pin
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=5040, Remote Applic.Title=8100, Remote node name=MIM
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=8100,
n Printer type=Kodak MLP190, Printer’s queue name=8100
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=8100, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
DICOM Network
Control 9 pin
Philips Nuc.Med. COPCIL board
Odyssey Copper Cable
Data 37 pin
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=5040, Remote Applic.Title=8300, Remote node name=MIM
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=8300,
n Printer type=Kodak MLP190, Printer’s queue name=8300
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=8300, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips Nuc.Med.
Odyssey
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=5040, Remote Applic.Title=8900, Remote node name=DV8900
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=8900,
n Printer type=Kodak MLP190, Printer’s queue name=8900
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=8900, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
DICOM Network
Philips Nuc.Med.
Odyssey
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=5040, Remote Applic.Title=DV8150, Remote node name=DV8150
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=8150,
n Printer type=Kodak MLP190, Printer’s queue name=8150
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=8150, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
DICOM Network
Philips Nuc.Med.
Odyssey
NM Odyssey Setup:
n with the pointer on the screen background, middle-click on the mouse
n select Configure/DICOM Print/Add
n set Port=5040, Remote Applic.Title=CMI1000, Remote node name=CMI1000
n click Done, click Yes-proceed, set IP=accordingly, click Done, OK
n type Unix root password and note assigned Dest.Number, click Done
n select Imprint Configuration/Add a printer, set Menu name for printer=CMI1000,
n Printer type=Kodak MLP190, Printer’s queue name=CMI1000
n click Update, Yes-proceed, OK, type Unix root password, Done, Done
n with the pointer on the screen background, middle-click on the mouse
n select Imprint Film, select Printer=CMI1000, select Options/set Printer controls
n Polarity=Positive, Border=Black, Trim=Off, Orient=Landscape, Mag=Cubic
n Smooth=Current, Copies=1, Density Min=0.2, Density Max=3.0, click Done
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
Philips Nuc.Med.
Pegasys
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=8300, IP=accordingly and click again Add Host
n Printer Name=8300, Port=104, Called AE Title=8300, Copies=1,
n Config.Info=LUT=0,10, Min.Density=20, Max.Density=300, Smoothing=0
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=8INX10IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 8300 printer, press Return, Return
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=0
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=190, IP=accordingly and click again Add Host
n Printer Name=190, Port=5040, Called AE Title=190, Copies=1,
n Config.Info=CS435\CN0, Min.Dens.=20, Max.Dens.=300, Smoothing=NORMAL
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=14INX17IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 190 printer, press Return, Return
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
iew
00 DryV
3M 87
Philips Nuc.Med.
Fiber Cable
Pegasys
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=8700, IP=accordingly and click again Add Host
n Printer Name=8700, Port=1024, Called AE Title=9410, Copies=1,
n Config.Info=LUT=Pmsv3k.w87,9, Min.Dens.=20, Max.Dens.=300, Smoothing=2
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=14INX17IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 8700 printer, press Return, Return
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips Nuc.Med.
Pegasys
Data 37-pin
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=8100, IP=accordingly and click again Add Host
n Printer Name=8100, Port=1024, Called AE Title=9410, Copies=1,
n Config.Info=LUT=Pmsv3k.w87,9, Min.Dens.=20, Max.Dens.=300, Smoothing=2
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=14INX17IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 8100 printer, press Return, Return
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
DICOM Network
Control 9 pin
Philips Nuc.Med. COPCIL board
Pegasys Copper Cable
Data 37 pin
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=8300, IP=accordingly and click again Add Host
n Printer Name=8300, Port=1024, Called AE Title=9410, Copies=1,
n Config.Info=LUT=0,10, Min.Dens.=20, Max.Dens.=300, Smoothing=0
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=8INX10IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 8300 printer, press Return, Return
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips Nuc.Med.
Pegasys Kodak 160 camera
Crossed
Network Cable
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=160, IP=accordingly and click again Add Host
n Printer Name=160, Port=5040, Called AE Title=160, Copies=1,
n Config.Info=CS435\CN0, Min.Dens.=20, Max.Dens.=300, Smoothing=NORMAL
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=14INX17IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 160 printer, press Return, Return
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
DICOM Network
Philips Nuc.Med.
Kodak 2180 camera
Pegasys
Fiber Cable
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=2180, IP=accordingly and click again Add Host
n Printer Name=2180, Port=5040, Called AE Title=2180, Copies=1,
n Config.Info=CS435\CN0, Min.Dens.=20, Max.Dens.=300, Smoothing=NORMAL
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=14INX17IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 2180 printer, press Return, Return
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips Nuc.Med.
Kodak 1120 camera
Pegasys
Fiber Cable
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=1120, IP=accordingly and click again Add Host
n Printer Name=1120, Port=5040, Called AE Title=1120, Copies=1,
n Config.Info=CS435\CN0, Min.Dens.=20, Max.Dens.=300, Smoothing=NORMAL
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=14INX17IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 1120 printer, press Return, Return
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=8200, IP=accordingly and click again Add Host
n Printer Name=8200, Port=5040, Called AE Title=8200, Copies=1,
n Config.Info=LUT=Pmsv3k.w87,9, Min.Dens.=20, Max.Dens.=300, Smoothing=2
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=14INX17IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 8200 printer, press Return, Return
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
DICOM Network
iew
00 DryV
3M 87
Philips Nuc.Med.
Fiber Cable
Pegasys
Fiber Cable
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=8700, IP=accordingly and click again Add Host
n Printer Name=8700, Port=5040, Called AE Title=8700, Copies=1,
n Config.Info=LUT=Pmsv3k.w87,9, Min.Dens.=20, Max.Dens.=300, Smoothing=2
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=14INX17IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 8700 printer, press Return, Return
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips Nuc.Med.
Pegasys
Data 37-pin
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=8100, IP=accordingly and click again Add Host
n Printer Name=8100, Port=5040, Called AE Title=8100, Copies=1,
n Config.Info=LUT=Pmsv3k.w87,9, Min.Dens.=20, Max.Dens.=300, Smoothing=2
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=14INX17IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 8100 printer, press Return, Return
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
DICOM Network
Control 9 pin
Philips Nuc.Med. COPCIL board
Pegasys Copper Cable
Data 37 pin
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=8300, IP=accordingly and click again Add Host
n Printer Name=8300, Port=5040, Called AE Title=8300, Copies=1,
n Config.Info=LUT=0,10, Min.Dens.=20, Max.Dens.=300, Smoothing=0
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=8INX10IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 8300 printer, press Return, Return
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips Nuc.Med.
Pegasys
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=8900, IP=accordingly and click again Add Host
n Printer Name=8900, Port=5040, Called AE Title=8900, Copies=1,
n Config.Info=LUT=Pmsv3k.w87,9, Min.Dens.=20, Max.Dens.=300, Smoothing=2
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=14INX17IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 8900 printer, press Return, Return
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4
n Formatting: Min Vert Sep=4, Trim Width Enabled=4
n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:
n Negotiate Presentation LUT=No, Negotiate Color Print=No
n TFT=Pmsv3k.w87 (Always=Y), Contrast=9 (Always=N)
n Smoothing Type=2 (Always=N), Image Polarity (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=No (Always=N), Warnings=No
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N)
n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No
n Modality ID=No, Annotation Override=No, Density Patch=No
n Image Resizing=Minify/Scale (Always=N)
n Text Box Location=None, Source ID=nm
DICOM Network
Philips Nuc.Med.
Pegasys
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=8150, IP=accordingly and click again Add Host
n Printer Name=8150, Port=5040, Called AE Title=DV8150, Copies=1,
n Config.Info=LUT=Pmsv3k.w87,9, Min.Dens.=20, Max.Dens.=300, Smoothing=2
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=14INX17IN, Color=Grayscale, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to 8150 printer, press Return, Return
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
DICOM Network
Philips Nuc.Med.
Pegasys
NM Pegasys Setup:
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select Patient Utilities/DICOM Utilities/DICOM Config
n click Configure=Printer, click Add,
n click Add Host and set Host=CMI1000, IP=accordingly and click again Add Host
n Printer Name= CMI1000, Port=5040, Called AE Title= CMI1000, Copies=1,
n Config.Info=LUT=Pmsv3k.w87,9, Min.Dens.=20, Max.Dens.=300, Smoothing=2
n Format=STANDARD\2,2, Orientation=LANDSCAPE, Maedia=BLUE FILM,
n Film Size=8INX10IN, Color=Color, Border=BLACK, Empty=BLACK,
n Transpose=NO, Magnif=CUBIC, Trim=NO, Dest=PROCESSOR, Priority=MED
n Save All & Exit
n with the pointer on the screen background, right-click on the mouse
n with further right-clicks select System Maintenance/Set Default Devices
n with further right-clicks select Change Default Settings/Change Default Formatter
n choose the number corresponding to CMI1000 printer, press Return, Return
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
Philips Ultrasound
Envisor
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=DryView, AE Title=8300, IP Addr.=accordingly, Port=104
n click Done
n under Roles section, click Modify, select B&W Printer SCP=DryView
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=2, Rows=3, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=8in x 10in, Media=Blue Film,
n Config.Printer Specific Data=LUT=1,2, Max Density=260,
n Page Size: sizeX=2256, sizeY=2676, Resolution=11.81, click OK
n click Done, click OK, click Close
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=0
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=K190, AE Title=190, IP Addr.=accordingly, Port=5040
n click Done
n under Roles section, click Modify, select B&W Printer SCP=K190
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=3, Rows=5, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=14in x 17in, Media=Blue Film,
n Config.Printer Specific Data=CS435\CN0, Max Density=260,
n Page Size: sizeX=4096, sizeY=5120, Resolution=12.67, click OK
n click Done, click OK, click Close
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
iew
00 DryV
3M 87
Philips Ultrasound
Fiber Cable
Envisor
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=DryView, AE Title=9410, IP Addr.=accordingly, Port=1024
n click Done
n under Roles section, click Modify, select B&W Printer SCP=DryView
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=3, Rows=5, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=14in x 17in, Media=Blue Film,
n Config.Printer Specific Data=LUT=Pmsv3k.w87,5, Max Density=260,
n Page Size: sizeX=4096, sizeY=5216, Resolution=12.82, click OK
n click Done, click OK, click Close
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips Ultrasound
Envisor
Data 37-pin
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=DryView, AE Title=9410, IP Addr.=accordingly, Port=1024
n click Done
n under Roles section, click Modify, select B&W Printer SCP=DryView
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=3, Rows=5, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=14in x 17in, Media=Blue Film,
n Config.Printer Specific Data=LUT=Pmsv3k.w87,5, Max Density=260,
n Page Size: sizeX=4096, sizeY=5216, Resolution=12.82, click OK
n click Done, click OK, click Close
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2
DICOM Network
Control 9 pin
Philips Ultrasound COPCIL board
Envisor Copper Cable
Data 37 pin
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=DryView, AE Title=9410, IP Addr.=accordingly, Port=1024
n click Done
n under Roles section, click Modify, select B&W Printer SCP=DryView
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=2, Rows=3, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=8in x 10in, Media=Blue Film,
n Config.Printer Specific Data=LUT=upmsv3k.w8u,2, Max Density=260,
n Page Size: sizeX=2256, sizeY=2676, Resolution=11.81, click OK
n click Done, click OK, click Close
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips Ultrasound
Envisor Kodak 160 camera
Crossed
Network Cable
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=K160, AE Title=160, IP Addr.=accordingly, Port=5040
n click Done
n under Roles section, click Modify, select B&W Printer SCP=K160
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=3, Rows=5, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=14in x 17in, Media=Blue Film,
n Config.Printer Specific Data=CS435\CN0, Max Density=260,
n Page Size: sizeX=4360, sizeY=5348, Resolution=12.82, click OK
n click Done, click OK, click Close
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
DICOM Network
Philips Ultrasound
Kodak 2180 camera
Envisor
Fiber Cable
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=K2180, AE Title=2180, IP Addr.=accordingly, Port=5040
n click Done
n under Roles section, click Modify, select B&W Printer SCP=K2180
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=3, Rows=5, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=14in x 17in, Media=Blue Film,
n Config.Printer Specific Data=CS435\CN0, Max Density=260,
n Page Size: sizeX=4096, sizeY=5156, Resolution=12.67, click OK
n click Done, click OK, click Close
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips Ultrasound
Kodak 1120 camera
Envisor
Fiber Cable
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=K1120, AE Title=1120, IP Addr.=accordingly, Port=5040
n click Done
n under Roles section, click Modify, select B&W Printer SCP=K1120
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=3, Rows=5, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=14in x 17in, Media=Blue Film,
n Config.Printer Specific Data=CS435\CN0, Max Density=260,
n Page Size: sizeX=4096, sizeY=5132, Resolution=12.67, click OK
n click Done, click OK, click Close
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=DryView, AE Title=8200, IP Addr.=accordingly, Port=5040
n click Done
n under Roles section, click Modify, select B&W Printer SCP=DryView
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=3, Rows=5, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=14in x 17in, Media=Blue Film,
n Config.Printer Specific Data=LUT=Pmsv3k.w87,5, Max Density=260,
n Page Size: sizeX=4360, sizeY=5216, Resolution=12.82, click OK
n click Done, click OK, click Close
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
DICOM Network
iew
00 DryV
3M 87
Philips Ultrasound
Fiber Cable
Envisor
Fiber Cable
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=DryView, AE Title=8700, IP Addr.=accordingly, Port=5040
n click Done
n under Roles section, click Modify, select B&W Printer SCP=DryView
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=3, Rows=5, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=14in x 17in, Media=Blue Film,
n Config.Printer Specific Data=LUT=Pmsv3k.w87,5, Max Density=260,
n Page Size: sizeX=4096, sizeY=5216, Resolution=12.82, click OK
n click Done, click OK, click Close
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips Ultrasound
Envisor
Data 37-pin
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=DryView, AE Title=8100, IP Addr.=accordingly, Port=5040
n click Done
n under Roles section, click Modify, select B&W Printer SCP=DryView
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=3, Rows=5, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=14in x 17in, Media=Blue Film,
n Config.Printer Specific Data=LUT=Pmsv3k.w87,5, Max Density=260,
n Page Size: sizeX=4096, sizeY=5216, Resolution=12.82, click OK
n click Done, click OK, click Close
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
DICOM Network
Control 9 pin
Philips Ultrasound COPCIL board
Envisor Copper Cable
Data 37 pin
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=DryView, AE Title=8300, IP Addr.=accordingly, Port=5040
n click Done
n under Roles section, click Modify, select B&W Printer SCP=DryView
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=2, Rows=3, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=8in x 10in, Media=Blue Film,
n Config.Printer Specific Data=LUT=upmsv3k.w8u,2, Max Density=260,
n Page Size: sizeX=2256, sizeY=2676, Resolution=11.81, click OK
n click Done, click OK, click Close
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips Ultrasound
Envisor
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=DryView, AE Title=8900, IP Addr.=accordingly, Port=5040
n click Done
n under Roles section, click Modify, select B&W Printer SCP=DryView
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=3, Rows=5, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=14in x 17in, Media=Blue Film,
n Config.Printer Specific Data=LUT=Pmsv3k.w87,5, Max Density=260,
n Page Size: sizeX=4488, sizeY=5464, Resolution=12.82, click OK
n click Done, click OK, click Close
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
DICOM Network
Philips Ultrasound
Envisor
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=DryView, AE Title=DV8150, IP Addr.=accordingly, Port=5040
n click Done
n under Roles section, click Modify, select B&W Printer SCP=DryView
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=3, Rows=5, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=14in x 17in, Media=Blue Film,
n Config.Printer Specific Data=LUT=Pmsv3k.w87,5, Max Density=260,
n Page Size: sizeX=4438, sizeY=5390, Resolution=12.82, click OK
n click Done, click OK, click Close
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
DICOM Network
Philips Ultrasound
Envisor
Envisor Setup:
n press Setup-button
n by pressing Enter-button go into System/DICOM/Servers & Roles
n under Servers section, click New and set:
n Name=CMI1000, AE Title=CMI1000, IP Addr.=accordingly, Port=5040
n click Done
n under Roles section, click Modify, select Color Printer SCP=CMI1000
n click Advanced
n into Basic set: Copies=1, Orient.=Portrait, Cols=2, Rows=3, click OK
n click Advanced
n into Advanced set: Dest.=Processor, Size=8in x 10in, Media=Blue Film,
n Config.Printer Specific Data=LUT=Pmsv3k.w87,5, Max Density=260,
n Page Size: sizeX=2508, sizeY=2954, Resolution=12.35, click OK
n click Done, click OK, click Close
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
Philips Ultrasound
HDI 5000
8300 Setup:
n on 8300 Operator Menu into Configure User set: D=16, C=10, Sharp/Smooth=0
n on 8300 Service Menu into Configure User set: Modality Group=0
DICOM Network
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
iew
00 DryV
3M 87
Philips Ultrasound
Fiber Cable
HDI 5000
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=260, Border Density=0, Mag.Type=8, Smoothing=2
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips Ultrasound
HDI 5000
Data 37-pin
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=260, Border Density=0, Mag.Type=8, Smoothing=2
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
Control 9 pin
Philips Ultrasound COPCIL board
HDI 5000 Copper Cable
Data 37 pin
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips Ultrasound
HDI 5000 Kodak 160 camera
Crossed
Network Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation= Cubic, Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
DICOM Network
Philips Ultrasound
Kodak 2180 camera
HDI 5000
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
n Formatting: Pixel Pitch=12.6582
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic, Modality=OT (Always=N)
n Border=3.99 (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N)
n Negotiate Color Print=Off
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips Ultrasound
Kodak 1120 camera
HDI 5000
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.5
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic, Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
n Close
n To print press Patient Data, press Print for every image, press End Exam
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
n Supported Item: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnification=On, Bilin=On, Repl=On
n Interpolation: Cubic Spline=On, Cubic Convolution 2=On
n Format Types: Custom=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n SCU: Density Space= On, Variable Border=On, PLUT Service= On
n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=2 (Always=Y), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
DICOM Network
iew
00 DryV
3M 87
Philips Ultrasound
Fiber Cable
HDI 5000
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=2 (Always=Y), Border=3.99 (Always=N),
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips Ultrasound
HDI 5000
Data 37-pin
n Close
n To print press Patient Data, press Print for every image, press End Exam
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=2 (Always=Y), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
DICOM Network
Control 9 pin
Philips Ultrasound COPCIL board
HDI 5000 Copper Cable
Data 37 pin
n Close
n To print press Patient Data, press Print for every image, press End Exam
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=11.9048
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3
n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=0 (Always=Y), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N)
n Negotiate Color Print=Off
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips Ultrasound
HDI 5000
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4
n Formatting: Min Vert Sep=4, Trim Width Enabled=4
n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:
n Negotiate Presentation LUT=No, Negotiate Color Print=No
n TFT=Pmsv3k.w87 (Always=Y), Contrast=9 (Always=N)
n Smoothing Type=2 (Always=Y), Image Polarity (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N)
n NeventReports=No (Always=Y), Warnings=Yes
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N)
n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No
n Modality ID=No, Annotation Override=No, Density Patch=No
n Image Resizing=Minify/Scale (Always=N)
n Text Box Location=None, Source ID=us
DICOM Network
Philips Ultrasound
HDI 5000
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2
n Formatting: Min Vert Sep=2, Trim Width Enabled=2
n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:
n Negotiate Presentation LUT=No, Negotiate Color Print=No,
n TFT Set Name=Pmsb.w87 (Always=Y)
n Contrast=9 (Always=N), Smoothing Type=2 (Always=N)
n Dmin=0.00 (Always=N), Dmax=2.60 (Always=N)
n Image Polarity=Normal (Always=N)
n NeventReports=No (Always=Y), Warnings=Yes
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
n 2mm Border=Yes, Film Clip Border=No,
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No,
n Modality ID=No, Annotation Override=No, Density Patch=No
n Image Resizing=Minify/Scale (Always=N),
n Text Box Location=None, Source ID=us
DICOM Network
Philips Ultrasound
HDI 5000
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
n under More Quality Settings:
n Tonescaling=Presentation LUT (Always=N),
n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N)
n Smoothing=2 (Always=Y), Polarity=Positive (Always=N)
n Interpolation=CUBIC (Always=N), Trim=No (Always=N)
n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults:
n Media Size=8.5x11 (Always=N), don’t care, this field plays no role
n Image Resizing=Minify (Always=N),
n Priority=Normal (Always=N), NeventReports=No (Always=Y),
n Warnings=Yes, Color=Yes
n (set Color=No when only b/w images are printed and set it to be sure
n to apply to the b/w images the Greyscale Image Quality settings)
n Page Annotation:
n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit
OEM Data
Manufacturer Philips
Modality US
Model iU22
sw version v1.1.0.138
Implement. Class UID 1.3.46.670589.5.2.10
Implement. Version Name ACP1.1L4
Kodak Data
DICOM-interface MIM internal / external or 9410 as below reported
DICOM-intf sw version as below reported
Printer model All cameras as below reported
Printer sw version as below reported
What’s new:
The setup of a Kodak printer for a given OEM Modality was split in 2 separate documents:
Therefore, as first step, setup the printer as per the correspondent page of the Setup Catalog for Kodak Cameras
(ie go to the Setup Catalog doc and do that first, then come back
here and finish install as per this Specific Setup Manual doc).
Therefore, as second and final step, setup the printer as per the indications reported here into the Setup Manual
for that particular OEM Modality.
Note that the Setup Manual has 2 sections ie the DryView section and the Wet section.
Note: MIM setup is basically also valid for 9410 by using AE=9410, Port=1024
Note: for each DryView camera select into the Modality the correspondent Prototype,
in particular for 8900 choose the Kodak 8900 standard,
in particular for CMI1000 choose the Kodak CMI1000 or Codonics 1660MD.
iU22 Setup:
n on keyboard sliding out from below iU22 console press Setups-button
n by pressing Enter-button go into PrintNetwork/Global Config./Devices
n click New Device
n into Step1 select Device Type=DICOM BW Printer
n into Step2 select Printer Type=Kodak-DryView-8150 (or 8200)-DICOM and set:
n Name=DryView, AE Title=DV8150, Port#=5040, IP Addr.=accordingly
n click OK
n by pressing Enter-button go into PrintNetwork/Device Selection/Printer
n highlight DryView and click Edit and set:
n Copies=1, Size=14x17, MediumType=Blue Film, Format=2x3, Orient.=Portrait
n click OK
n under Associate to Print select DryView
n at the bottom click Done to end the configuration
DryView section:
Setup for Kodak DryView cameras ie
8900, 8700, 8610, 8600, 8500, 8300, 8200, 8150, 8100, 1000
Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic,
ie common to all DICOM connections independently from the Specific modality connected.
Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup
Catalog, and then, as second and final step, setup the Image Quality parameters as per the
Setup Manual for the Specific OEM Modality here below reported.
MIM external 8700, 8500 8100 8300 8610 (8600) 8200 1000
into Kodak catalog 15 16 17 18 14 21
see Setup as per page
MIM sw version 6.1 6.1 6.1 6.1 6.1 2.0.b3
Printer sw version 1.34 2.4.1 3.5 2.4 (2.5) 4.9.1 1.0.b8
Image Quality setup into MIM (or 9410) for DryView cameras:
Which are the Image Quality parameters sent out by the OEM Modality:
DICOM Sent out by Value sent out for Value sent out Value sent out
Parameters Modality 8900, 8150, 8700, for 8300 for 8610, 8600
(Yes/No) 8500, 8200, 8100,
1000
Config. Information Yes LUT=0,9 LUT=0,10 LUT=0,3
(LUT=TFT,Contrast)
Max. Density Yes 300 300 300
Magnification Yes NONE NONE NONE
Smoothing No
PLUT No
Illumination (PLUT) No
Reflective Ambient No
Light (PLUT)
Wet section:
Setup for Kodak Wet cameras ie 160, 2180, 1120, 190
Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic,
ie common to all DICOM connections independently from the Specific modality connected.
Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup
Catalog, and then, as second and final step, setup the Image Quality parameters as per the
Setup Manual for the Specific OEM Modality here below reported.
Note: in regards to 969 parameters use the same as per 8700 setup.
Image Quality setup into MIM (or 190) for Wet cameras:
Note: reported setup was tested eg for 160 and tentatively is valid also for other cameras ie
2180, 1120, 190.
Which are the Image Quality parameters sent out by the OEM Modality:
DICOM Sent out by Value sent out for
Parameters Modality 160, 2180, 1120,
(Yes/No) 190
Config. Information Yes CS435\CN0
(CurveShape\Contrast)
Max. Density Yes 300
Magnification Yes NONE
Smoothing No
PLUT No
Illumination (PLUT) No
Reflective Ambient No
Light (PLUT)
Miscellaneous:
Notes:
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Philips EasyVision DX
Workstation
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=0
n on 8300 Service Menu into Configure User set: Modality Group=0
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
iew
00 DryV
3M 87
Philips EasyVision DX
Fiber Cable
Workstation
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips EasyVision DX
Workstation
Data 37-pin
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
DICOM Network
Data 37 pin
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips EasyVision DX
Workstation Kodak 160 camera
Crossed
Network Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
Philips EasyVision DX
Kodak 2180 camera
Workstation
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
n Formatting: Pixel Pitch=12.6582
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic, Modality=OT (Always=N)
n Border=3.99 (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N)
n Negotiate Color Print=Off
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips EasyVision DX
Kodak 1120 camera
Workstation
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.5
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic, Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
n Supported Item: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnification=On, Bilin=On, Repl=On
n Interpolation: Cubic Spline=On, Cubic Convolution 2=On
n Format Types: Custom=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n SCU: Density Space= On, Variable Border=On, PLUT Service= On
n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=2 (Always=N), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
8200 Setup on CONFIGURATION Menu:
n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87
n on LOCAL PANEL Menu: Contrast=6, Density=3.00
n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smooth=0
n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025
iew
00 DryV
3M 87
Philips EasyVision DX
Fiber Cable
Workstation
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=2 (Always=N), Border=3.99 (Always=N),
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips EasyVision DX
Workstation
Data 37-pin
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=2 (Always=N), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
DICOM Network
Control 9 pin
Philips EasyVision DX COPCIL board
Workstation Copper Cable
Data 37 pin
MIM200 Setup:
n on Configure, Network:
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips EasyVision DX
Workstation
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4
n Formatting: Min Vert Sep=4, Trim Width Enabled=4
n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:
n Negotiate Presentation LUT=No, Negotiate Color Print=No
n TFT=Pmsv3k.w87 (Always=Y), Contrast=9 (Always=N)
n Smoothing Type=0 (Always=Y), Image Polarity (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=No (Always=N), Warnings=No
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N)
n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No
n Modality ID=No, Annotation Override=No, Density Patch=No
n Image Resizing=Minify/Scale (Always=N)
n Text Box Location=None, Source ID=ws
DICOM Network
Philips EasyVision DX
Workstation
8150 Setup:
DICOM Network
Philips EasyVision DX
Workstation
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
Connection POINT-TO-POINT:
n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual... 3
n Kodak DryView 8800 MULTI-INPUT MANAGER /
2 x Kodak DryView 8700 LASER IMAGER / Dual .................................................................................. 4
n Kodak DryView 8700 LASER IMAGER / Plus......................................................................................... 5
n Kodak DryView 8700 LASER IMAGER / Standard ................................................................................. 6
n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual... 7
n Kodak DryView 8500 LASER IMAGER / Plus......................................................................................... 8
n Kodak DryView 8500 LASER IMAGER / Standard ................................................................................. 9
n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual... 10
n Kodak DryView 8300 LASER IMAGER / Standalone.............................................................................. 11
n Kodak DryView 8300 LASER IMAGER / Standard via SCSI .................................................................. 12
n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual /
Kodak DryView 8300 LASER IMAGER / Dual........................................................................................ 13
n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual /
Kodak DryView 8500 LASER IMAGER / Dual........................................................................................ 14
n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual /
Kodak DryView 8300 LASER IMAGER / Dual........................................................................................ 15
n Kodak Digital Science 969 HQ LASER IMAGER ................................................................................ 17
n Kodak Digital Science 969 HQT LASER IMAGER ............................................................................. 18
n Kodak Digital Science 959 XL LASER IMAGER ................................................................................ 19
n Kodak DryView 8100 LASER IMAGER................................................................................................... 20
n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus
(see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) ( 1) ......................................................... 21
n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER ( 1).............................................................................................. 23
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER ( 2,3,4) ........................................................................................... 25
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER (2,3,4) ........................................................................................ 27
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 1120 LASER PRINTER (2,3,4) ........................................................................................ 29
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus
4
(see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) ( )................................................ 31
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
4
Kodak DryView 8100 LASER IMAGER ( )............................................................................... 33
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
4
Kodak DryView 8300 LASER IMAGER ( )............................................................................... 35
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
4
Kodak DryView 8200 LASER IMAGER ( )............................................................................... 37
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
5
setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Philips
EasyVision / EasyRAD Philips 37-pin RS422 37-to-9 pin
Control Cable Host Adaptor Cable
Host Control 422 OUT Host UKEIB
Philips 37-pin
Data Cable
Image Data OUT DEIB
Fiber Cable
Fiber Cable
er
anag
putM
i-In
Mult
8800
3M
iew
00 DryV
3M 87
Fiber Cable
8700 Dual
8800 MIM
Requirements: EasyVision 4.2 or EasyRAD 2.3, 8800 rel. 4.2, 8700 rel. 1.15
Fiber Cable
Fiber Cable
er
anag
putM
i-In
Mult
8800
3M
iew
00 DryV
3M 87
Fiber Cable
8700 Dual
iew
00 DryV
3M 87
Fiber Cable
8800 MIM
8700 Dual
Requirements: EasyVision 4.2 or EasyRAD 2.3, 8800 rel. 5.1, 8700 rel. 1.22
EasyVision / EasyRAD Setup (so the 2 cameras are treated independently):
n after power up select 4=Install Config, 2=Start Config
n inside window containing list of Configured Nodes select the EV Node and click Edit
n the whole menu is called EasyVision Config, select Peripherals settings
n below window containing list of Printers defined for EV, click New
n set Interface type=PCI/SBus, Printer type=3M 8700, Name=dv8700nbr1
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=Off (12-bit-print)
n into Advanced Printer Properties: Shared Interface=On, Dest. Nbr=0, Proceed, Exit
n inside window containing list of Configured Nodes select the EV Node and click Edit
n the whole menu is called EasyVision Config, select Peripherals settings
n below window containing list of Printers defined for EV, click New
n set Interface type=PCI/SBus, Printer type=3M 8700, Name=dv8700nbr2
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=Off (12-bit-print)
n into Advanced Printer Properties: Shared Interface=On, Dest. Nbr=1
n Proceed, Exit, Proceed, Execute, Proceed, click on handle, click on triangle
Setup: on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8800/8700 Dual Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST: Pixel Correct=No, Scale Format=No, Scale Magnif.=No, Slides=Super
n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Odd, Timeout=255
Fiber Cable
Fiber Cable
yView
00 Dr
3M 87
8700 Plus
8700 Standard
Data Cable
I mage Data OUT
Fiber Cable
Fiber Cable
ger
Mana
nput
ulti-I
0M
880
3M
yView
00 Dr
3M 87
Fiber Cable
8500 Dual
8800 MIM
Requirements: EasyVision 4.2 or EasyRAD 2.3, 8800 rel. 5.1, 8500 rel. 1.22
Fiber Cable
Fiber Cable
yView
00 Dr
3M 87
8500 Plus
8500 Standard
Data Cable
I mage Data OUT
Fiber Cable
Fiber Cable
8300 Dual
er
nag
ut Ma
lti-Inp
00 Mu
8800 MIM
Requirements: EasyVision 4.2 or EasyRAD 2.3, 8800 rel. 5.1, 8300 rel. 4.2
8300 Setup:
n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=None, Modality Group=0
8800 Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: Density=16, Contrast=10
n on HOST: Pixel Correct=No, Scale Format=No, Scale Magnif.=No, Slides=Super
n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Odd, Timeout=255
8300
Philips 37-pin RS422 37-to-9 pin
Philips EasyVision
Control Cable Host Adaptor Cable
Host Control 422 OUT
8300 Setup:
n on 8300 Operator Menu set:
n Density=16
n Contrast=10
n Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=Odd
n Modality Group=0
Philips
SCSI Cable to be
EasyVision/EasyRAD
connected in P4 P4
SCSI OUT
SCSI Termination
to be plugged in P5
P5
8300 Setup:
n on 8300 Operator Menu into User Nbr. & Params (User nbr.=2) set:
n Nbr. B&W copies=1, Nbr. Color copies=1
n Density=16, Contrast=10, Sharp/Smooth=1
n Polarity=Positive, Print Options=Print All
n B&W Format=1 on 1, Color Format=1 on 1
n Film Numbering=Off, Autoprint=On, Print Aspect Ratio=1.00
n on 8300 Service Menu into Configure User set:
n SCSI Interface: Role=Target, Unit ID=4, Bus Termination=On
n Modality Group=0
Fiber Cable
Fiber Cable
9-to-9-pin Copper Cable
Fiber Cable
37-pin Digital Cable POEIB nag
er
ut Ma
lti-Inp
0 Mu
880
3M
Fiber Cable
iew
0 DryV
3M 870
8300 Dual
8800 MIM
8700 Dual
Requirements: EasyVision 4.2 or EasyRAD 2.3, 8800 v.5.1, 8700 v.1.22, 8300 v.4.2
8300 Setup:
n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu: Serial: Baud=1200, Data=8, Stop=1, Parity=Even, Protocol=3M
n on 8300 Service Menu set: Digital Interface: Parity=None, Modality Group=0
Fiber Cable
Fiber Cable
Fiber Cable
8700 Dual 3M 87
00 Dr
yView
ger
Mana
nput
ulti-I
0M
880
3M
Fiber Cable
yView
00 Dr
3M 87
8800 MIM
8500 Dual
Fiber Cable
Fiber Cable
9-to-9-pin Copper Cable
Fiber Cable
37-pin Digital Cable POEIB nag
er
ut Ma
lti-Inp
0 Mu
880
3M
Fiber Cable
iew
0 DryV
3M 870
8300 Dual
8800 MIM
8500 Dual
Requirements EasyVision 4.2 or EasyRAD 2.3, 8800 v.5.1, 8500 v.1.22, 8300 v.4.2
8300 Setup:
n on 8300 Operator Menu set:
n Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=None
n Modality Group=0
Fiber Cable
Fiber Cable
3 M H Q L a ser Im ag er
M969 HQ
M969 HQ Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST: Pixel Correction=No, Scale Format=No, Scale Magnif.=No, Slides=Super
n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Odd, Timeout=255
M969 HQT
Philips 37-pin RS422 37-to-9 pin
Philips EasyVision Host Adaptor Cable
Control Cable
Host Control 422 OUT 3 M H Q L a s er Im a g e r
Philips 37-pin
Data Cable
I mage Data OUT
Fiber Cable
Fiber Cable
3 M L a s e r I m a g er
M959 XL
Setup:
n on XL Control Panel set Density & Contrast depending on chemistry
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
n on XL Input Module install LUT 322A0
M959 XL Setup:
n on COMM Menu: 959 Default
n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Odd, Timeout=255
DryView 8100
RS422 9-pole
Philips 37-pin RS422 37-to-9 pin plug
Philips EasyVision Host Adaptor Cable
Control Cable
Host Control 422 OUT
Philips 37-pin
Data Cable
Image Data OUT
DPI4-to-DPC Cable
Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,
8800/8500 Dual and HQ cameras by basically using the correspondent
Model into 9410 Local Printers and in case of 8500 and HQ by installing
8500 and HQ into EasyVision/EasyRAD Camera Config.File
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=255, Parity=Odd, Memory=22
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=ev, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=Off
n TFT/ULUT=Pmsv3k.w87, Mem.Full =On, Image Size =On, Alarm Mode=On
n into Defaults: Dest.=Printer 1, Media Size=14x17, C=9, D=14, Bit=8
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=255, Parity=Odd, Memory=22
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=ev, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor)
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst.:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ev,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst.:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ev,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst.:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ev,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
Fiber Cable
Host Control 422 OUT
RS422 37-to-50 pin
Philips 37-pin Fiber Cable
Digital Adaptor Cable
Data Cable
Image Data OUT
Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,
8800/8500 Dual and HQ cameras by basically using the correspondent
Model into MIM 200 Destinations and in case of 8500 and HQ
by installing 8500 and HQ into EasyVision/EasyRAD Camera Config.File
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst.:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ev,
n Mod.Name=ev, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=MOV
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
RS422
Kpad / Host Control 9-pole Plug
RS422 37-to-15 pin
Philips 37-pin Octopus Adaptor Cable COPCIL Board
Philips EasyVision Control Adaptor Cable Control 9-pin
Control Cable Copper Cable
Host Control 422 OUT
RS422 37-to-50 pin
Philips 37-pin
Digital Adaptor Cable
Data Cable
Image Data OUT
Data 37 pin
Kodak MIM 200
Kodak DryView 8100
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst.:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ev,
n Mod.Name=ev, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=MOV
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst.:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ev,
n Mod.Name=ev, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=MOV
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=EasyVision Wkst.:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=ev,
n Mod.Name=ev, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2048, Parity=Odd, Timer=59, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=MOV
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
n Supported Item: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnification=On, Bilin=On, Repl=On
n Interpolation: Cubic Spline=On, Cubic Convolution 2=On
n Format Types: Custom=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
DICOM Network
DryView 8300
Philips EasyVision
Requirements: EasyVision or EasyRAD v4.2, 8300 v4.9.1, 8300 DICOM board v3.3
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16
n Contrast=10
n Sharp/Smooth=1
n Film Layout : Format=1 on 1, Mode=Portrait
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
Requirements: Philips EasyVision rel. 4.2 or EasyRAD rel. 4.2, 190 rel. 1.7.29
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
Philips EasyVision
Fiber Cable
iew
00 DryV
3M 87
Fiber Cable
Requirements: EasyVision rel. 4.2 or EasyRAD rel.4.2, 9410 v1.6, 8700 v1.34
Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,
8800/8500 Dual and HQ cameras by basically using the correspondent
Model into 9410 Local Printers and in case of 8500 and HQ by installing
8500 and HQ into EasyVision/EasyRAD DICOM Camera Config.File
(if HQ DICOM Camera Config.File not yet available it will also work with 8700)
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
Philips EasyVision
Fiber Cable 00 DryV
iew
nag
er 3M87
ut Ma
lti-Inp
Mu
8800
Fiber Cable
3M
Fiber Cable
iew
00 DryV
3M 87
8700 Dual
Requirements: EasyVision 4.2 or EasyRAD 4.2, 9410 v1.6, 8800 v5.2, 8700 v1.34
n inside window containing list of Configured Nodes select the EV Node and click Edit
n the whole menu is called EasyVision Config, select Peripherals settings
n below window containing list of Printers defined for EV, click New
n set Interface=DICOM, Printer=3M 8700, Name=8700nbr2, AE title=9411
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=Off (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on handle, click on triangle
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700_1, Model=8800/8700 Dual, Output=Fiber, 8800 Setup=Printer1
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700_1, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8700_1, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700_2, Model=8800/8700 Dual, Output=Fiber, 8800 Setup=Printer2
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700_2, AE Title=9411, Port=1025, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8700_2, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips EasyVision
Data 37-pin
Requirements: EasyVision rel. 4.2 or EasyRAD rel. 4.2, 9410 v1.6, 8100 v2.4.1
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title=9410, Port=1024, Max Associations=5
on Device Setup, SCP PRINTERS, Registered Users:
DICOM Network
DryView 8300
Control 9 pin
Philips EasyVision COPCIL board
Copper Cable
Data 37 pin
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title=9410, Port=1024, Max Associations=5
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Data 37 pin
EasyVision Setup:
n after power up select 4=Install Config, 2=Start Config
n below window containing list of Configured Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 9410, port=1024, AETitle=9410
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration i.e., do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Configured Nodes select the EV Node and click Edit
n the whole menu is called EasyVision Config, select Peripherals settings
n below window containing list of Printers defined for EV, click New
n set Interface=DICOM, Printer=3M 8610, Name=dv8610, AE title=9410
n into Config. Media List:
n 8x10 G8=On (8-bit-print), 8x10 G12=On (12-bit-print) (Off if 8600)
n Proceed, Exit, Proceed, Execute, Proceed, click on handle, click on triangle
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8610, Model=8600/8610, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=1, Installed TFT/ULUT=don’t care
n Max.Density=300, Contrast=5, Border Density=0
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8610, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly
n SCP=8610, Copies=1, Contrast Table=5, Max.Density=300
n Border Density=0, Mag.Type=8, Smoothing=1
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Gamma Table=Linear in Transmittance, Contrast Group=1, Kernel Group=1
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
n Contrast Test Mode=No, Contrast Test Mode Density=0
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:
n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0
n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)
n on 8610 Operator Menu into Configure User set:
n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P
n Gamma Table=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care
n on 8610 Service Menu into Configure User set:
n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255
n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
DICOM Network
Philips EasyVision
Kodak 160 camera
Crossed
Network Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=3 i.e., 435 (Always=N), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic,
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
DICOM Network
Philips EasyVision
Kodak 2180 camera
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
n Formatting: Pixel Pitch=12.6582
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic,
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N)
n Negotiate Color Print=Off
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips EasyVision
Kodak 1120 camera
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.5
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=Curve Shape (Always=Y)
n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Interpolation=Cubic,
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Philips EasyVision
Kodak DMI 3600 camera
Crossed
Network Cable
Requirements: Philips EasyVision rel. 4.2, MIM200 v6.1, DMI 3600 rel. 2.0
Important: set 3600 Media Menu correctly, respecting which size in which tray
EasyVision Setup:
n after power up select 4=Install Config, 2=Start Config
n below window containing list of Configured Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle=3600
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration i.e., do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Configured Nodes select the EV Node and click Edit
n the whole menu is called EasyVision Config, select Peripherals settings
n below window containing list of Printers defined for EV, click New
n set Interface=DICOM, Printer Type=Kodak DMIS DICOMRGB
n Name=DMI3600, AE title=3600
n into Config. Media List: 8x10 G8=On (8-bit-print), 8x10 G12=Off (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on handle, click on triangle
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., KodakDMI3600, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM5
n on Configure, Destination, Add, Print, Direct, Qualified, DMI 3600:
n General: Log.Name=DMI3600, IPAddr=100.100.100.20
n General: Database Name=DMI3600, Model=DMI3600
n Media=11x14in, 3128x3854, 3778, Film
DICOM Network
Philips EasyVision
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
DICOM Network
iew
00 DryV
3M 87
Philips EasyVision
Fiber Cable
Fiber Cable
Requirements: EasyVision rel. 4.2 or EasyRAD rel.4.2, MIM200 v6.1, 8700 v1.34
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=0 (Always=N)
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8800
Fiber Cable
3M
Fiber Cable
iew
00 DryV
3M 87
n inside window containing list of Config.Nodes select the EV Node and click Edit
n the whole menu is called EasyVision Config, select Peripherals settings
n below window containing list of Printers defined for EV, click New
n set Interface=DICOM, Printer= 3M 8700, Name=8700nbr2, AE title=8700B
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=Off (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on handle, click on triangle
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips EasyVision
Data 37-pin
Requirements: EasyVision rel. 4.2 or EasyRAD rel. 4.2, MIM200 v6.1, 8100 v2.4.1
Note: This setup is basically also valid for 25 PS computer
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
DICOM Network
Control 9 pin
Philips EasyVision COPCIL board
Copper Cable
Data 37 pin
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Data 37 pin
EasyVision Setup:
n after power up select 4=Install Config, 2=Start Config
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle=8610
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the EV Node and click Edit
n the whole menu is called EasyVision Config, select Peripherals settings
n below window containing list of Printers defined for EV, click New
n set Interface=DICOM, Printer= 3M 8610, Name=dv8610, AE title=8610
n into Config. Media List:
n 8x10 G8=On (8-bit-print), 8x10 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on handle, click on triangle
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set:
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:
n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0
n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)
n on 8610 Operator Menu into Configure User set:
n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P
n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care
n on 8610 Service Menu into Configure User set:
n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255
n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
DICOM Network
Philips
EasyVision / EasyRAD
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
DICOM Network
Philips
EasyVision / EasyRAD
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
DICOM Network
Philips
EasyVision / EasyRAD
workstation
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
OEM Data
Manufacturer Philips
Modality workstation
Model ENsphere
sw version v1.1
Implement. Class UID 1.2.276.0.7230010.3.0.3.4.1
Implement. Version Name OFFIS_DCMTK_341
Kodak Data
DICOM-interface MIM internal / external or 9410 as below reported
DICOM-intf sw version as below reported
Printer model All cameras as below reported
Printer sw version as below reported
What’s new:
The setup of a Kodak printer for a given OEM Modality was split in 2 separate documents:
Therefore, as first step, setup the printer as per the correspondent page of the Setup Catalog for Kodak Cameras
(ie go to the Setup Catalog doc and do that first, then come back
here and finish install as per this Specific Setup Manual doc).
Therefore, as second and final step, setup the printer as per the indications reported here into the Setup Manual
for that particular OEM Modality.
Note that the Setup Manual has 2 sections ie the DryView section and the Wet section.
Note: MIM setup is basically also valid for 9410 by using AE=9410, Port=1024
Ensphere Setup:
n enter PreferencesConfiguration//Administrator/Site Configuration
n into Printer set:
n Name=DryView, Type=DICM, Spool Directory=accordingly,
n Color=MONO2, IP Address=accordingly, port=5040, AETitle=DV8150
n Click Exit, click Yes
n When you print set Film Type=Blue Film, Filmsize=14x17, Magnification=Cubic
DryView section:
Setup for Kodak DryView cameras ie
8900, 8700, 8610, 8600, 8500, 8300, 8200, 8150, 8100, 1000
Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic,
ie common to all DICOM connections independently from the Specific modality connected.
Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup
Catalog, and then, as second and final step, setup the Image Quality parameters as per the
Setup Manual for the Specific OEM Modality here below reported.
MIM external 8700, 8500 8100 8300 8610 (8600) 8200 1000
into Kodak catalog 15 16 17 18 14 21
see Setup as per page
MIM sw version 6.1 6.1 6.1 6.1 6.1 2.0.b3
Printer sw version 1.34 2.4.1 3.5 2.4 (2.5) 4.9.1 1.0.b8
Image Quality setup into MIM (or 9410) for DryView cameras:
Which are the Image Quality parameters sent out by the OEM Modality:
DICOM Sent out by Value sent out for Value sent out Value sent out
Parameters Modality 8900, 8150, 8700, for 8300 for 8610, 8600
(Yes/No) 8500, 8200, 8100,
1000
Config. Information No
(LUT=TFT,Contrast)
Max. Density No
Magnification Yes CUBIC CUBIC CUBIC
Smoothing No
PLUT No
Illumination (PLUT) No
Reflective Ambient No
Light (PLUT)
Wet section:
Setup for Kodak Wet cameras ie 160, 2180, 1120, 190
Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic,
ie common to all DICOM connections independently from the Specific modality connected.
Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup
Catalog, and then, as second and final step, setup the Image Quality parameters as per the
Setup Manual for the Specific OEM Modality here below reported.
Note: in regards to 969 parameters use the same as per 8700 setup.
Image Quality setup into MIM (or 190) for Wet cameras:
Note: reported setup was tested eg for 160 and tentatively is valid also for other cameras ie
2180, 1120, 190.
Which are the Image Quality parameters sent out by the OEM Modality:
DICOM Sent out by Value sent out for
Parameters Modality 160, 2180, 1120, 190
(Yes/No)
Config. Information No
(CurveShape\Contrast)
Max. Density Yes
Magnification Yes CUBIC
Smoothing No
PLUT No
Illumination (PLUT) No
Reflective Ambient No
Light (PLUT)
Miscellaneous:
Notes:
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
5
setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
DryView 8300
Philips 3D RA
Workstation
Note: on 3D RA image matrix=512, possible formats 1:1, 2:1, 4:1, 6:1 only
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=0 ie Auto
n Film Layout : Format= 1 on 1, Mode= Portrait
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
Note: on 3D RA image matrix=512, possible formats 1:1, 2:1, 4:1, 6:1 only
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
8700 Plus
Philips 3D RA
Fiber Cable
Workstation 00 DryV
iew
3M 87
Fiber Cable
Note: on 3D RA image matrix=512, possible formats 1:1, 2:1, 4:1, 6:1 only
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips 3D RA
Workstation
Data 37-pin
Note: on 3D RA image matrix=512, possible formats 1:1, 2:1, 4:1, 6:1 only
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
DICOM Network
Data 37 pin
Note: on 3D RA image matrix=512, possible formats 1:1, 2:1, 4:1, 6:1 only
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips 3D RA
Kodak 160 camera
Workstation
Note: on 3D RA image matrix=512, possible formats 1:1, 2:1, 4:1, 6:1 only
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
DICOM Network
Philips 3D RA
Kodak 2180 camera
Workstation
Fiber Cable
Note: on 3D RA image matrix=512, possible formats 1:1, 2:1, 4:1, 6:1 only
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips 3D RA
Kodak 1120 camera
Workstation
Fiber Cable
Note: on 3D RA image matrix=512, possible formats 1:1, 2:1, 4:1, 6:1 only
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Philips 3D RA
Workstation
Crossed
Network Cable
Note: on 3D RA image matrix=512, possible formats 1:1, 2:1, 4:1, 6:1 only
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
DICOM Network
iew
00 DryV
3M 87
Philips 3D RA
Fiber Cable
Workstation
Fiber Cable
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=11 (Always=N)
n Border=Black (Always=N), Film Base=Blue Film (Always=N)
n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips 3D RA
Workstation
Data 37-pin
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
DICOM Network
Control 9 pin
Philips 3D RA COPCIL board
Workstation Copper Cable
Data 37 pin
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips 3D RA
Workstation
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
DICOM Network
Philips 3D RA
Workstation
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
DICOM Network
Philips 3D RA
Workstation
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
n under More Quality Settings:
n Tonescaling=Presentation LUT (Always=N),
n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N)
n Smoothing=11 (Always=N), Polarity=Positive (Always=N)
n Interpolation=CUBIC (Always=N), Trim=No (Always=N)
n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults:
n Media Size=8.5x11 (Always=N), don’t care, this field plays no role
n Image Resizing=Minify (Always=N),
n Priority=Normal (Always=N), NeventReports=No (Always=Y),
n Warnings=Yes, Color=Yes
n (set Color=No when only b/w images are printed and set it to be sure
n to apply to the b/w images the Greyscale Image Quality settings)
n Page Annotation:
n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
Philips ViewForum
workstation
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 8300, port=104, AETitle=8300
n click Automatic Config., after a while the result should be Print as SCP,
n (note: in case of DICOM connection problem set Max PDU=4K or 16K), Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= 3M 8300 DICOM, Name=dv8300, AE title=8300
n into Config. Media List: 8x10 G8=On (8-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=1
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 190, port=5040, AETitle=190
n click Automatic Config., after a while the result should be Print as SCP,
n (note: in case of a DICOM connection problem set Max PDU=65536), Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= Kodak MLP-190 DICOM, Name=k190,
n AE title=190, into Config. Media List: 14x17 G8=On (8-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
iew
00 DryV
3M 87
Philips ViewForum
Fiber Cable
workstation
Fiber Cable
Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into 9410 Local Printers
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 9410, port=1024, AETitle=9410
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= 3M 8500 DICOM, Name=dv8500, AE title=9410
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8500, Model=8500, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
DICOM Network
iew
00 DryV
3M 87
Philips ViewForum
Fiber Cable
workstation
Fiber Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 9410, port=1024, AETitle= 9410
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= 3M 8700 DICOM, Name=dv8700, AE title= 9410
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips ViewForum
workstation
Data 37-pin
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 9410, port=1024, AETitle=9410
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= 3M 8100 DICOM, Name=dv8100, AE title=9410
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
DICOM Network
Control 9 pin
Philips ViewForum COPCIL board
workstation Copper Cable
Data 37 pin
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 9410, port=1024, AETitle= 9410
n click Automatic Config., after a while the result should be Print as SCP,
n (note: in case of a DICOM connection problem set Max PDU=65536), Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= 3M 8300 DICOM, Name=dv8300, AE title=9410
n into Config. Media List: 8x10 G8=On (8-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Data 37 pin
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 9410, port=1024, AETitle=9410
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= 3M 8610 DICOM, Name=dv8610, AE title=9410
n into Config. Media List:
n 8x10 G8=On (8-bit-print), 8x10 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8610, Model=8600/8610, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=1, Installed TFT/ULUT= don’t care
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:
n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0
n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)
n on 8610 Operator Menu into Configure User set:
n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P
n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care
n on 8610 Service Menu into Configure User set:
n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127
n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
DICOM Network
Philips ViewForum
workstation Kodak 160 camera
Crossed
Network Cable
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle=160
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= Kodak KELI-160 DICOM, Name=k160
n AE title=160, into Config. Media List: 14x17 G8=On (8-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
DICOM Network
Philips ViewForum
Kodak 2180 camera
workstation
Fiber Cable
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle=2180
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= Kodak KELP2180 DICOM, Name=k2180,
n AE title=2180, into Config. Media List: 14x17 G8=On (8-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Philips ViewForum
Kodak 1120 camera
workstation
Fiber Cable
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle=1120
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= Kodak KELP1120 DICOM, Name=k1120,
n AE title=1120, into Config. Media List: 14x17 G8=On (8-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Philips ViewForum
workstation
Crossed
Network Cable
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle=8200
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer=3M 8200 DICOM, Name=k8200, AE title=8200
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
DICOM Network
iew
00 DryV
3M 87
Philips ViewForum
Fiber Cable
workstation
Fiber Cable
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle=8500
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= 3M 8500 DICOM, Name=dv8500, AE title=8500
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
DICOM Network
iew
00 DryV
3M 87
Philips ViewForum
Fiber Cable
workstation
Fiber Cable
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle=8700
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= 3M 8700 DICOM, Name=dv8700, AE title=8700
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips ViewForum
workstation
Data 37-pin
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle=8100
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= 3M 8100 DICOM, Name=dv8100, AE title= 8100
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
DICOM Network
Control 9 pin
Philips ViewForum COPCIL board
workstation Copper Cable
Data 37 pin
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle= 8300
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= 3M 8300 DICOM, Name=dv8300, AE title=8300
n into Config. Media List: 8x10 G8=On (8-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Data 37 pin
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle=8610
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM, Printer= 3M 8610 DICOM, Name=dv8610, AE title=8610
n into Config. Media List:
n 8x10 G8=On (8-bit-print), 8x10 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set:
n General: Log.Name=8610 (or 8600)
n General: Database=8610 (or 8600), Model=8610 (or 8600), Memory=32
n Media Info: Media=8x10in, 5025x6200, 6020, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12 (8 if 8600), Header/Line,Transfer=2000,Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=25.8065
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5
n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=5 (Always=N)
n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Transmittance
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n Smoothing Type=1 (Always=Y), Image Polarity=Normal (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N)
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N)
n Negotiate Color Print=Off
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:
n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0
n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)
n on 8610 Operator Menu into Configure User set:
n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P
n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care
n on 8610 Service Menu into Configure User set:
n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127
n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
DICOM Network
Philips ViewForum
workstation
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 8900, port=5040, AETitle=8900
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM,
n Printer= 3M 8900-Standard DICOM (or 3M 8200 DICOM),
n Name=dv8900, AE title=8900
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
DICOM Network
Philips ViewForum
workstation
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 8150, port=5040, AETitle=DV8150
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM,
n Printer= Kodak 8150 DICOM (or 3M 8200),
n Name=dv8150, AE title=DV8150
n into Config. Media List: 14x17 G8=On (8-bit-print), 14x17 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
DICOM Network
Philips ViewForum
workstation
ViewForum Setup:
n enter into Configuration
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of CMI-1000, port=5040, AETitle=CMI1000
n click Automatic Config., after a while the result should be Print as SCP,
n (Note: in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Print SOP Classes set:
n Basic Greyscale=On, Basic Color=On, Presentation LUT=Off
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the VF Node and click Edit
n the whole menu is called VF Config, select Peripherals settings
n below window containing list of Printers defined for VF, click New
n set Interface=DICOM,
n Printer= Kodak CMI-1000 DICOM (or Codonics-NP1660MD-DICOM),
n Name=CMI1000, AE title=CMI1000
n into Config. Media List:
n if Kodak CMI-1000 was choosed then, depending on what inside CMI-1000, set:
n if A4 inside CMI-1000 Paper Tray, A4 Paper RGB_8=On, all others Off
n if Letter inside CMI-1000 Tray, 8_5INx11IN Paper RGB_8=On, others=Off
n if Codonics-NP1660 was choosed then, depending on what inside CMI-1000, set:
n if A4 inside CMI-1000 Paper Tray, set A4 Paper RGB_8=On, others=Off
n if Letter inside CMI-1000 Paper Tray, set A Paper RGB_8=On, others=Off
n Proceed, Exit, Proceed, Execute, Proceed, click on triangle
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
1
Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
Philips Xcelera
cardiac PACS workstation
for images coming from
Nuc.Med. / Ultrasound
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=8300, Port number=104
n Display Format (cols x rows)=2x3, Orientation=Portrait, Annotation=Off
n (Note: Annot.=Off means no patient name, Annot.=On could cause problems)
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
8300 Setup:
n on 8300 Operator Menu into Configure User set:
n Density=16, Contrast=10, Sharp/Smooth=2
n on 8300 Service Menu into Configure User set:
n Modality Group=0
DICOM Network
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=190, Port number=5040
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=Off
n (Note: Annot.=Off means no patient name, Annot.=On could cause problems)
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
190 Setup:
n On 190 Control Panel press Menu, Setup:
n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2
n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly
n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
iew
00 DryV
3M 87
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=9410, Port number=1024
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=Off
n (Note: Annot.=Off means no patient name, Annot.=On doesn’t work)
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
DICOM Network
iew
00 DryV
3M 87
Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into 9410 Local Printers
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=9410, Port number=1024
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=Off
n (Note: Annot.=Off means no patient name, Annot.=On doesn’t work)
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8500, Model=8500, Output=Fiber
n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8500, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8500, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips Xcelera
cardiac PACS workstation
for images coming from
Nuc.Med. / Ultrasound
Data 37-pin
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=9410, Port number=1024
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=Off
n (Note: Annot.=Off means no patient name, Annot.=On doesn’t work)
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5
on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
DICOM Network
Control 9 pin
COPCIL board
Philips Xcelera
Copper Cable
cardiac PACS workstation
for images coming from
Nuc.Med. / Ultrasound Data 37 pin
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=9410, Port number=1024
n Display Format (cols x rows)=2x3, Orientation=Portrait, Annotation=Off
n (Note: Annot.=Off means no patient name, Annot.=On doesn’t work)
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers:
n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly
n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u
n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2
n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
n Trim=No, Attribute Warning=No
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips Xcelera
Kodak 160 camera
cardiac PACS workstation Crossed
for images coming from Network Cable
Nuc.Med. / Ultrasound
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=160, Port number=5040
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=On
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
DICOM Network
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=2180, Port number=5040
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=On
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
DICOM Network
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=1120, Port number=5040
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=On
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
DICOM Network
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=8200, Port number=5040
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=On
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40,
n General: Database Name=8200, Model=8200, Memory=32
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)
n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)
n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)
n Supported Item: Collation=On, Common Text=On, Tonescaling=On
n Supported Item: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnification=On, Bilin=On, Repl=On
n Interpolation: Cubic Spline=On, Cubic Convolution 2=On
DICOM Network
iew
00 DryV
3M 87
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=8700, Port number=5040
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=On
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
DICOM Network
iew
00 DryV
3M 87
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=8500, Port number=5040
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=On
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set:
n General: Log.Name=8500
n General: Database Name=8500, Model=8500, Memory=32
n Media Info: Media=11x14in, 3388x4283, 4193, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
DICOM Network
RS422
COPCIL Board 9-pole Plug
Copper Cable Control 9-pin
Philips Xcelera
cardiac PACS workstation
for images coming from
Nuc.Med. / Ultrasound
Data 37-pin
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=8100, Port number=5040
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=On
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= Pmsb.w87 (Always=N), Contrast (dry)=9 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=11 (Always=N), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
n Negotiate Color Print=Off
DICOM Network
Control 9 pin
COPCIL board
Philips Xcelera
Copper Cable
cardiac PACS workstation
for images coming from
Nuc.Med. / Ultrasound Data 37 pin
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=8300, Port number=5040
n Display Format (cols x rows)=2x3, Orientation=Portrait, Annotation=On
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:
n General: Log.Name=8300
n General: Database Name=8300, Model=8300, Memory=32
n Media Info: Media=8x10in, 2256x2676, 2596, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=11.9048
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3
n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify:
n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)
n TFT/ULUT= u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=Off (Always=Y), Warning Status=On
n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
n Modality ID=Off, Annotation Override=Off (Always=N)
n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
n Smoothing Type=2 (Always=N), Border=3.99 (Always=N)
n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N)
n Negotiate Color Print=Off
8300 Setup:
n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto
n on Operator Menu set: Film Layout: 1 on 1=Portrait
n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16
n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
DICOM Network
Philips Xcelera
cardiac PACS workstation
for images coming from
Nuc.Med. / Ultrasound
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=8900, Port number=5040
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=On
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
DICOM Network
Philips Xcelera
cardiac PACS workstation
for images coming from
Nuc.Med. / Ultrasound
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=DV8150, Port number=5040
n Display Format (cols x rows)=3x4, Orientation=Portrait, Annotation=On
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
8150 Setup:
n on Configuration, System, Network:
n Host Name=DV8150DRE, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n AE Title: Log.Name=DV8150
n Media Types: Media=35x43cm, 4438x5390, 5262, Any
n Media Types: Media=35x35cm, 4438x4414,4286, Any
n Media Types: Media=11x14in, 3440x4438, 4310, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
DICOM Network
Philips Xcelera
cardiac PACS workstation
for images coming from
Nuc.Med. / Ultrasound
Kodak CMI 1000
Xcelera Setup:
n enter File/Preferences/Hardcopy printer and set:
n Hostname= IP Address accordingly, AETitle=CMI1000, Port number=5040
n Display Format (cols x rows)=2x3, Orientation=Portrait, Annotation=On
n click OK
n to print select a study, if it is a run click the stop-button below the image
n drag-and-drop the wanted image into the image folder
n point on the image into the image folder and right-click on the mouse
n select Hardcopy Print
CMI-1000 Setup:
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):
at Local Panel, under Menu, Imager Setup:
n Network Setup:
n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly
n under More Settings: DICOM Port=5040
n Edit Host Name/AE Title=CMI1000
n Modality (SCU) Config (or after modality recognition):
n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No
n Note: Color IQ settings used when images sent with Color DICOM SOP
n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm
n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y)
n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
n under More Quality Settings:
n Tonescaling=Presentation LUT (Always=N),
n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N)
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
Fiber Cable
Fiber Cable
ger
ana
tM
npu
l ti- I
Mu
0
88
3M
DryView
3M 8700
Fiber Cable
8700 Dual
8800 MIM
Requirements: Thoravision rel. 3.3.1, 8800 rel. 4.2, 8700 rel. 1.15
Setup:
n on Philips Thoravision rel. 3.3.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
Dr yView
3M 8700
8700 Plus
Setup:
n on Philips Thoravision rel. 3.3.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8700 Standard
Data Cable
Image Data OUT
Fiber Cable
Fiber Cable
ger
ana
tM
npu
l ti- I
Mu
0
88
3M
DryView
3M 8700
Fiber Cable
8500 Dual
8800 MIM
Requirements: Thoravision rel. 3.3.1, 8800 rel. 5.1, 8500 rel. 1.22
Setup:
n on Philips Thoravision rel. 3.3.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/O FF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
Dr yView
3M 8700
8500 Plus
Setup:
n on Philips Thoravision rel. 3.3.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8500 Standard
Data Cable
Image Data OUT
Setup:
n on Philips Thoravision rel. 3.3.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
8300 Dual
er
ng
a
t Ma
npu
l ti- I
Mu
Fiber Cable
800
M8
3
8800 MIM
Requirements: Thoravision rel. 3.3.1, 8800 rel. 5.1, 8300 rel. 4.2
Setup:
n on Philips Thoravision rel. 3.3.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
RS422 37-to-9 Host 37 pin side 2 20 3 21 1
Adaptor Cable pinout 9 pin side 8 3 7 2 1
8300 Setup:
n on 8300 Operator Menu set:
n Film Layout: Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=None
n Modality Group=0
8800 Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: Density=16, Contrast=10
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n 831 Cmd Set Beta Tables: Horiz.Smooth=11, Vert.Smooth=11
n on EIB Menu: Parity=Enable Odd, Timeout=255
8300
Philips 37-pin RS422 37-to-9 pin
Philips Thoravision
Control Cable Host Adaptor Cable
Host Control 422 OUT
8300 Setup:
n on 8300 Operator Menu set:
n Density=16
n Contrast=10
n Film Layout: Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Delimiter=Comma, Protocol=3M
n Memory=20 Meg
n Digital Interface: Parity=None
n Modality Group=0
Fiber Cable
Fiber Cable
3M H Q L a se r Im a g e r
M969 HQ
Setup:
n on Philips Thoravision rel. 3.3.1 install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
M969 HQ Setup:
n on COMM Menu:
n 959 Default
n on IMAGE Menu:
n TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n 831 Cmd Set Beta Tables: Horiz.Smooth=11, Vert.Smooth=11
n on EIB Menu:
n Parity=Enable Odd, Timeout=255
M969 HQT
Philips 37-pin RS422 37-to-9 pin
Philips Thoravision Host Adaptor Cable
Control Cable
Host Control 422 OUT 3M H Q L a se r I m a g e r
Philips 37-pin
Data Cable
Image Data OUT
Setup:
n on Philips Thoravision rel. 3.3.1 install Camera Config.File 3M
Fiber Cable
Fiber Cable
3 M L a se r I ma g er
M959 XL
Setup:
n on Philips Thoravision rel. 3.3.1 install Camera Config.File 3M
n on XL Control Panel set Density & Contrast depending on chemistry
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
n on XL Input Module install LUT 322A0
M959 XL Setup:
n on COMM Menu:
n 959 Default
n on COMM Menu:
n 831 Cmd Set Beta Tables: Horiz.Smooth=11, Vert.Smooth=11
n on EIB Menu:
n Parity=Enable Odd, Timeout=255
RS422 9-pole
Philips 37-pin RS422 37-to-9 pin plug
Philips Thoravision Host Adaptor Cable
Control Cable
Host Control 422 OUT
Philips 37-pin
Data Cable
Image Data OUT
DryView 8100
Thoravision with
Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus
(see also 8800/8700 Dual and HQ)
DPI4-to-DPC Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Thoravision Setup:
n on Thoravision into System/Service/Configuration/Complete System:
- ItemName=SystemOptions check OptHCU=Yes
- ItemName=Unstructured Items/printerAttached check Value=Yes
- ItemName=Imager Definitions verify 3M is defined
- ItemName=SiteInformation set Preferred Printer= 3M
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=255, Parity=Odd, Memory=10
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=thorav, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On
n TFT/ULUT=Pmsv3k.w87, Mem.Full =On, Image Size =On, Alarm Mode=On
n into Defaults: Dest.=Printer 1, Media Size=14x17, C=9, D=14, Bit=8
n into Defaults: Beta Y =11
Thoravision Setup:
n on Thoravision into System/Service/Configuration/Complete System:
- ItemName=SystemOptions check OptHCU=Yes
- ItemName=Unstructured Items/printerAttached check Value=Yes
- ItemName=Imager Definitio ns verify 3M is defined
- ItemName=SiteInformation set Preferred Printer= 3M
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=255, Parity=Odd, Memory=10
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=thorav, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On
n TFT/ULUT=Pmsb.w87, Mem.Full =On, Image Size =On, Alarm Mode=On
n into Defaults: Destination=Printer 1, Media Size=14x17, C=9, D=14, Bit=8
n into Defaults: Beta Y =11
Thoravision with
Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER
Requirements: Thoravision rel. 3.3.1, MIM 200 v6.1, KELI 160 v7.2
Thoravision Setup:
n on Thoravision into System/Service/Configuration/Complete System:
- ItemName=SystemOptions check OptHCU=Yes
- ItemName=Unstructured Items/printerAttached check Value=Yes
- ItemName=Imager Definitions verify Kodak is defined
- ItemName=SiteInformation set Preferred Printer=Kodak
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=ThoraVision:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=thorav,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2560, Parity=Odd, Timer=5, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
Thoravision with
Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER
Requirements: Thoravision rel. 3.3.1, MIM 200 v6.1, KELP 2180 v2.17H
Thoravision Setup:
n on Thoravision into System/Service/Configuration/Complete System:
- ItemName=SystemOptions check OptHCU=Yes
- ItemName=Unstructured Items/printerAttached check Value=Yes
- ItemName=Imager Definitions verify Kodak is defined
- ItemName=SiteInformation set Preferred Printer=Kodak
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=ThoraVision:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=thorav,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2560, Parity=Odd, Timer=5, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
Thoravision with
Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 1120 LASER PRINTER
Requirements: Thoravision rel. 3.3.1, MIM 200 v6.1, KELP 1120 v2.40/032
Thoravision Setup:
n on Thoravision into System/Service/Configuration/Complete System:
- ItemName=SystemOptions check OptHCU=Yes
- ItemName=Unstructured Items/printerAttached check Value=Yes
- ItemName=Imager Definitions verify Kodak is defined
- ItemName=SiteInformation set Preferred Printer=Kodak
MIM200 Setup:
n on Configure, Network:
n Computer Name=e.g., Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=ThoraVision:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=thorav,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2560, Parity=Odd, Timer=5, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM200 Destination
Thoravision Setup:
n on Thoravision into System/Service/Configuration/Complete System:
- ItemName=SystemOptions check OptHCU=Yes
- ItemName=Unstructured Items/printerAttached check Value=Yes
- ItemName=Imager Definitions verify 3M is defined
- ItemName=SiteInformation set Preferred Printer= 3M
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=ThoraVision:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=thorav,
n Mod.Name=thorav, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2560, Parity=Odd, Timer=5, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
RS422
Kpad / Host Control 9-pole Plug
RS422 37-to-15 pin
Philips 37 -pin Octopus Adaptor Cable COPCIL Board
Philips Thoravision Control Adaptor Cable Control 9-pin
Control Cable Copper Cable
Host Control 422 OUT
RS422 37 -to-50 pin
Philips 37-pin
Digital Adaptor Cable
Data Cable
Image Data OUT
Data 37 pin
Kodak MIM 200
Kodak DryView 8100
Thoravision Setup:
n on Thoravision into System/Service/Configuration/Complete System:
- ItemName=SystemOptions check OptHCU=Yes
- ItemName=Unstructured Items/printerAttached check Value=Yes
- ItemName=Imager Definitions verify 3M is defined
- ItemName=SiteInformation set Preferred Printer= 3M
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=ThoraVision:
n Board/Channel=Digital Board 1 Channel 1, Logical Name=thorav,
n Mod.Name=thorav, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=2048, Lines=2560, Parity=Odd, Timer=5, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
Fiber Cable
Fiber Cable
ger
ana
tM
npu
l ti- I
Mu
0
88
3M
DryView
3M 8700
Fiber Cable
8700 Dual
8800 MIM
Requirements: Tomoscan SR rel. 1.4F, 8800 rel. 4.2, 8700 rel. 1.15
Setup:
n on Philips Tomoscan SR rel. 1.4F install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
Dr yView
3M 8700
8700 Plus
Setup:
n on Philips Tomoscan SR rel. 1.4F install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8700 Standard
Data Cable
Image Data OUT
Fiber Cable
Fiber Cable
ger
ana
tM
npu
l ti- I
Mu
0
88
3M
DryView
3M 8700
Fiber Cable
8500 Dual
8800 MIM
Requirements: Tomoscan SR rel. 1.4F, 8800 rel. 5.1, 8500 rel. 1.22
Setup:
n on Philips Tomoscan SR rel. 1.4F install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
Dr yView
3M 8700
8500 Plus
Setup:
n on Philips Tomoscan SR rel. 1.4F install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8500 Standard
Data Cable
Image Data OUT
Setup:
n on Philips Tomoscan SR rel. 1.4F install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
Fiber Cable
Fiber Cable
8300 Dual
er
ng
a
t Ma
npu
l ti- I
Mu
Fiber Cable
800
M8
3
8800 MIM
Requirements: Tomoscan SR rel. 1.4F, 8800 rel. 5.1, 8300 rel. 4.2
Setup:
n on Philips Tomoscan SR rel. 1.4F install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
8300 Setup:
n on 8300 Operator Menu set:
n Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=None
n Modality Group=0
8800 Setup:
n on COMM Menu:
n 4800, 8, Enable Even, 1, 959 Command Set, CR, ACK/NACK, Pace=0
n on IMAGE Menu: Density=16, Contrast=10
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=15
n on EIB Menu: Parity=Enable Odd, Timeout=10
8300
Philips 37-pin RS422 37-to-9 pin
Philips CT Tomoscan SR
Control Cable Host Adaptor Cable
Host Control 422 OUT
Setup:
n on Philips Tomoscan SR rel. 1.4F install Camera Config.File 3M
8300 Setup:
n on 8300 Operator Menu set:
n Density=16
n Contrast=10
n Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=4800, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=Odd
n Modality Group=0
Fiber Cable
Fiber Cable
3M H Q L a se r Im a g e r
M969 HQ
Setup:
n on Philips Tomoscan SR rel. 1.4F install Camera Config.File 3M
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
M969 HQ Setup:
n on COMM Menu:
n 4800, 8, Enable Even, 1, 959 Command Set, CR, ACK/NACK, Pace=0
n on IMAGE Menu:
n TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=15
n on EIB Menu:
n Parity=Enable Odd, Timeout=10
M969 HQT
Philips 37-pin RS422 37-to-9 pin
Philips CT Tomoscan SR Host Adaptor Cable
Control Cable
Host Control 422 OUT 3M H Q L a se r I m a g e r
Philips 37-pin
Data Cable
Image Data OUT
Setup:
n on Philips Tomoscan SR rel. 1.4F install Camera Config.File 3M
Fiber Cable
Fiber Cable
3 M L a se r I ma g er
M959 XL
Setup:
n on Philips Tomoscan SR rel. 1.4F install Camera Config.File 3M
n on XL Control Panel set Density & Contrast depending on chemistry
n on UKEIB set OFF/ON/OFF/ON/ON/ON, Switch=Center
n on XL Input Module install LUT 322A0
M959 XL Setup:
n on COMM Menu:
n 4800, 8, Enable Even, 1, 959 Command Set, CR, ACK/NACK, Pace=0
n on EIB Menu:
n Parity=Enable Odd, Timeout=10
RS422 9-pole
Philips 37-pin RS422 37-to-9 pin plug
Philips CT Tomoscan SR Host Adaptor Cable
Control Cable
Host Control 422 OUT
Philips 37-pin
Data Cable
Image Data OUT
DryView 8100
DPI4-to-DPC Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Note: same setup valid for Tomoscan CT of SR series and AV series
Tomoscan SR Setup:
n on ALIIF board set switch DSW3 (1-8)=OFF/ON/OFF/ON/ON/OFF/ON/ON (3M)
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=10, Parity=Odd, Memory=7
n Serial Port: Protocol=952, Parity=Even, Baud Rate=4800
on Device Setup, HOST KEYPADS:
n Kpad=sr, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On
n TFT/ULUT=Pmsv3k.w87, Mem.Full =On, Image Size =On, Alarm Mode=On
n into Defaults: Dest.=Printer 1, Media Size=14x17, C=9, D=14
Tomoscan SR Setup:
n on ALIIF board set switch DSW3 (1-8)=OFF/ON/OFF/ON/ON/OFF/ON/ON (3M)
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=10, Parity=Odd, Memory=7
n Serial Port: Protocol=952, Parity=Even, Baud Rate=4800
on Device Setup, HOST KEYPADS:
n Kpad=sr, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On
Tomoscan SR Setup:
on ALIIF board set switch DSW3 (1-8)=ON/OFF/ON/ON/ON/OFF/ON/ON (Kodak)
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add, Dig.,Qual.=Tomoscan Expanded:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= ctsr,
n Primary Control: Type= Hitachi, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1024, Lines=1024, Parity=Odd, Timer=10, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 4800, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: C ustom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup:
n Select Destination=KELI 160, Media Size Select=35x43
n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:
n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline
n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On
n Curve Shape=3.0, Auto Study=Off, Console=On
n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:
n into Machine Setup Menu set: Tonescaling=CurveShape
Tomoscan SR Setup:
on ALIIF board set switch DSW3 (1-8)=ON/OFF/ON/ON/ON/OFF/ON/ON (Kodak)
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add, Dig.,Qual.=Tomoscan Expanded:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= ctsr,
n Primary Control: Type= Hitachi, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1024, Lines=1024, Parity=Odd, Timer=10, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 4800, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
Tomoscan SR Setup:
on ALIIF board set switch DSW3 (1-8)=ON/OFF/ON/ON/ON/OFF/ON/ON (Kodak)
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add, Dig.,Qual.=Tomoscan Expanded:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= ctsr,
n Primary Control: Type= Hitachi, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio =1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1024, Lines=1024, Parity=Odd, Timer=10, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 4800, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
1120 Setup:
n Optic al Interface board will automatic configure into 1120, no setup needed
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM200 Destination
Note: same setup valid for Tomoscan CT of SR series and AV series
Tomoscan SR Setup:
on ALIIF board set switch DSW3 (1-8)=OFF/ON/OFF/ON/ON/OFF/ON/ON (3M)
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add, Dig.,Qual.=Tomoscan Expanded:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= ct,
n Mod.Name=ct, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1024, Lines=1024, Parity=Odd, Timer=10, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4, 4800, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
Tomoscan SR Setup:
on ALIIF board set switch DSW3 (1-8)=OFF/ON/OFF/ON/ON/OFF/ON/ON (3M)
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add, Dig.,Qual.=Tomoscan Expanded:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= ct,
n Mod.Name=ct, Primary Control: Type=M952/P831, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=1024, Lines=1024, Parity=Odd, Timer=10, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4, 4800, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
Keypad
RS422 9-pole
Keypad 9-to-9-pin plug
Philips CT Tomoscan SR UKEIB
Copper Cable
Imager
Video Cable
Image Video OUT
DryView 8100
Imagraph Card
Octopus Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Note: same setup valid for Tomoscan CT of SR series and AV series
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, IMAGRAPH Video Menu:
n Vert.Tot=1125, Frame Period=36, Interlace=ON, Vert.Back Porch=41.0
n Image Height=1024, Horiz.Tot=1792, Horiz.Back Sync=436
n Image Width=1294, Horiz.Sync Width=2518, Horiz.Back Porch=421
on I/O CARD SETUP, SERIAL Ports Menu:
n COM3: Protocol=Superset, Parity=None, Baud Rate=19200
on Device Setup, IMS KEYPADS:
n Kpad=sr, Hosp=philips, Serial Port=COM3, Image Card=Imagraph, Channel=A1
Philips CT Tomoscan SR
UKEIB
Keypad Keypad
Imager
Copper Cable
Video Cable
ImageVideo OUT
Imagraph Card
DryView 8100 Octopus Cable
RS422
9-pole Plug Control 9-pin
COPCIL Board
Copper Cable RS422 Copper
Converter Cable
Data 37 pin
9410 PACS Link
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, IMAGRAPH Video Menu:
n Vert.Tot=1125, Frame Period=36, Interlace=ON, Vert.Back Porch=41.0
n Image Height=1024, Horiz.Tot=1792, Horiz.Back Sync=436
n Image Width=1294, Horiz.Sync Width=2518, Horiz.Back Porch=421
on I/O CARD SETUP, SERIAL Ports Menu:
n COM3: Protocol=Superset, Parity=None, Baud Rate=19200
on Device Setup, IMS KEYPADS:
n Kpad=sr, Hosp=philips, Serial Port=COM3, Image Card=Imagraph, Channel=A1
n Available Printers=8100, Film Destination=Processor, TFT/ULUT=Ver693c0.w87
n into Defaults: Dest=8100, Size=14x17, C=9, D=14, Dmax=3.0, Bit=8
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config., Input, Direct Connect, Config.Add,Video,Qual.=Tomoscan SR6000:
n Board/Channel=Video60 Board 1 Channel 1, Logical Name= ctsr,
n Primary Control Type= Conv.Kpad, Com Port=9
n Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n HL=31.36, HD=22.75, Clk=57.14, Tot.Pxls=1792, Image Pxls=1300
n HS=3, HFP=0.61, HBP=5, HB=9.61
n Image Lines=1024, Tot.Lines=1124, VBP=38, VS=4, PreE=PostE=4
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
Fiber Cable
Video Card
Octopus Cable
Video Cable
ImageVideo OUT
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gate way Addr=accordingly
n on Config., Input, Direct Connect, Config.Add,Video,Qual.=Tomoscan SR6000:
n Board/Channel=Video60 Board 1 Channel 1, Logical Name= ctsr,
n Primary Control Type= Conv.Kpad, Com Port=9
n Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n HL=31.36, HD=22.75, Clk=57.14, Tot.Pxls=1792, Image Pxls=1300
n HS=3, HFP=0.61, HBP=5, HB=9.61
n Image Lines=1024, Tot.Lines=1124, VBP=38, VS=4, PreE=PostE=4
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
n Formatting: Pixel Pitch=12.6582
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup:
n Select Destination= KELP 2180, Media Size Select=35x43
n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:
n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline
n Image Dmax=3.00, Border=Bla ck, Collation=Off, Auto Print=On
n Curve Shape=3.0, Auto Study=Off, Console=On
n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:
n into Machine Setup Menu set: Tonescaling=CurveShape
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
Fiber Cable
Video Card
Octopus Cable
Video Cable
ImageVideo OUT
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config., Input, Direct Connect, Config.Add,Video,Qual.=Tomoscan SR6000:
n Board/Channel=Video60 Board 1 Channel 1, Logical Name= ctsr,
n Primary Control Type= Conv.Kpad, Com Port=9
n Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n HL=31.36, HD=22.75, Clk=57.14, Tot.Pxls=1792, Image Pxls=1300
n HS=3, HFP=0.61, HBP=5, HB=9.61
n Image Lines=1024, Tot.Lines=1124, VBP=38, VS=4, PreE=PostE=4
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.5
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup:
n Select Destination= KELP 1120, Media Size Select=35x43
n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:
n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline
n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On
n Curve Shape=3.0, Auto Study=Off, Console=On
n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:
n into Machine Setup Menu set: Tonescaling=CurveShape
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
Fiber Cable
Video Card
Fiber Cable
Octopus Cable
Video Cable
ImageVideo OUT
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM200 Destination
Note: same setup valid for Tomoscan CT of SR series and AV series
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config., Input, Direct Connect, Config.Add,Video,Qual.=Tomoscan SR6000:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= ct,
n Primary Control Type= Conv.Kpad, Com Port=9
n Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n HL=31.36, HD=22.75, Clk=57.14, Tot.Pxls=1792, Image Pxls=1300
n HS=3, HFP=0.61, HBP=5, HB=9.61
n Image Lines=1024, Tot.Lines=1124, VBP=38, VS=4, PreE=PostE=4
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config., Input, Direct Connect, Config.Add,Video,Qual.=Tomoscan SR6000:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= ct,
n Primary Control Type= Conv.Kpad, Com Port=9
n Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n HL=31.36, HD=22.75, Clk=57.14, Tot.Pxls=1792, Image Pxls=1300
n HS=3, HFP=0.61, HBP =5, HB=9.61
n Image Lines=1024, Tot.Lines=1124, VBP=38, VS=4, PreE=PostE=4
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.8205
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:
n into Machine Setup Menu set: Tonescaling=Perception LUT
n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup
n Select Destination= 8100, Media Size Sele ct=35x43
n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:
n Orientation=P, Copies=01, Smoothing Type=13, Film Contrast=9
n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On
n TFT/ULUT=Pmsb.w87, Auto Study=Off, Console=On, Annotation=Off
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
3
setup valid also for Kodak PACS LINK 25 PRINT SERVER.
DICOM Network
EasyRAD Setup:
n after power up select 4=Install Config, 2=Start Config
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 9410, port=1024, AETitle=9410
n click Automatic Config., after a while the result should be Print as SCP,
n (Note : in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the EV Node and click Edit
n the whole menu is called EasyVision Config, select Peripherals settings
n below window containing list of Printers defined for EV, click New
n set Interface=DICOM, Printer= 3M 8610, Name=dv8610, AE title=9410
n into Config. Media List:
n 8x10 G8=On (8-bit-print), 8x10 G12=On (12-bit-print) (Off if 8600)
n Proceed, Exit, Proceed, Execute, Proceed, click on handle, click on triangle
9410 Setup:
n on Device Setup, LOCAL PRINTERS:
n Printer=8610, Model=8600/8610, Output=Copper
n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:
n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0
n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)
n on 8610 Operator Menu into Configure User set:
n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P
n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care
n on 8610 Service Menu into Configure User set:
n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255
n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
DICOM Network
EasyRAD Setup:
n after power up select 4=Install Config, 2=Start Config
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of MIM200, port=5040, AETitle=8610
n click Automatic Config., after a while the result should be Print as SCP,
n (Note : in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the EV Node and click Edit
n the whole menu is called EasyVision Config, select Peripherals settings
n below window containing list of Printers defined for EV, click New
n set Interface=DICOM, Printer= 3M 8610, Name=dv8610, AE title=8610
n into Config. Media List:
n 8x10 G8=On (8-bit-print), 8x10 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on handle, click on triangle
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add:
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:
n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0
n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)
n on 8610 Operator Menu into Configure User set:
n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P
n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care
n on 8610 Service Menu into Configure User set:
n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255
n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
DICOM Network
Philips
Mammo Diagnost
PCR-reader
EasyRAD workstation
EasyRAD Setup:
n after power up select 4=Install Config, 2=Start Config
n below window containing list of Config.Nodes, click New, choose DICOM Node
n set IP addr.=addr.of 8900, port=5040, AETitle=8900
n click Automatic Config., after a while the result should be Print as SCP,
n (Note : in case of a DICOM connection problem set Max PDU=65536,
n on SCP Settings: do not run Automatic Configuration ie do not click on it
n on SCP Settings: de-click all others possibilities, leave selected only Print as SCP
n on SCP Settings, Extended Settings, on SCP Transfer Syntaxes:
n de-click all others possibilities, leave selected only Implicit Little Endian, Exit)
n Proceed
n inside window containing list of Config.Nodes select the EV Node and click Edit
n the whole menu is called EasyVision Config, select Peripherals settings
n below window containing list of Printers defined for EV, click New
n set Interface=DICOM, Printer= Kodak 8900 double (or 3M HQ 969),
n Name=dv8900, AE title=8900
n into Config. Media List: 8x10 G8=On (8-bit-print), 8x10 G12=On (12-bit-print)
n Proceed, Exit, Proceed, Execute, Proceed, click on handle, click on triangle
8900 Setup:
n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr= accordingly
n on Configuration, System, Software License:
n License Status=Mammo Key is ON
n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination:
n General: Log.Name=8900
n Media Types: Media=35x43cm, 9100x11037, 10781, Any
n Media Types: Media=35x35cm,9100x9087, 8831, Any
n Media Types: Media=11x14in, 7137x9100, 8844, Any
n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On
n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On
n Formatting: DICOM Annotation Box=On, Req.Image Size=On
n Formatting: Req.Size Scale=On, Req.Size Mix Page=On
n Formatting: Req.Size Mix Row=On, Trim=On,
n Formatting: True Landscape=On, Rotation=On
n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On
n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0
n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4
n Formatting: Min Vert Sep=4, Trim Width Enabled=4
n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:
n Negotiate Presentation LUT=No, Negotiate Color Print=No
n TFT=Pmsv3k.w87 (Always=Y), Contrast=9 (Always=N)
n Smoothing Type=0 (Always=N), Image Polarity (Always=N)
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)
n NeventReports=No (Always=Y), Warnings=Yes
n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
n 2mm Border=Yes, Film Clip Border=No, Film Base=Mammo Blue Film (Always=Y)
n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=Y)
n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No
n Modality ID=No, Annotation Override=No, Density Patch=No
n Image Resizing=Minify/Scale (Always=N)
n Text Box Location=None, Source ID=ws
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
Fiber Cable
r
na
ge
Ma
put
ti -I n
ul
00M
88
3M
ry Vie w
700 D
3M8
Fiber Cable
8700 Dual
8800 MIM
Requirements: Gyroscan T5 rel. R3.6.2, 8800 rel. 4.2, 8700 rel. 1.15
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
Fiber Cable
Fiber Cable
View
0 0 Dry
3 M 87
8700 Plus
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
8700 Standard
Philips 25-pin RS232 25-to-9 pin
Philips MR Gyroscan T5
Control Cable Host Adaptor Cable
Host Control 232 OUT
yView
700 D r
3M 8
Philips 37-pin
Image Data OUT Data Cable
n on TDB/C board:
n Jumpers=RS232, Switch=Center
n on COMM Menu:
n 959 Default
n on IMAGE Menu:
n TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n on SYSTEM Menu:
n Memory Management=Best Fit
n on EIB Menu: Parity=Enable Even, Timeout=5
Fiber Cable
Fiber Cable
er
ag
n
t Ma
npu
lti I-
0Mu
88
0
3M
ie w
0Dr yV
3 M870
Fiber Cable
8500 Dual
8800 MIM
Requirements: Gyroscan T5 rel. R3.6.2, 8800 rel. 5.1, 8500 rel. 1.22
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
Fiber Cable
Fiber Cable
View
0 0 Dry
3 M 87
8500 Plus
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
8500 Standard
Philips 25-pin RS232 25-to-9 pin
Philips MR Gyroscan T5
Control Cable Host Adaptor Cable
Host Control 232 OUT
yView
700 D r
3M 8
Philips 37-pin
Image Data OUT Data Cable
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
Fiber Cable
Fiber Cable
8300 Dual
ager
an
pu
tM
i- In
ult
Fiber Cable
00M
88
3M
8800 MIM
Requirements: Gyroscan T5 rel. R3.6.2, 8800 rel. 5.1, 8300 rel. 4.2
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
8300 Setup:
n on 8300 Operator Menu set:
n Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=None
n Modality Group=0
8800 Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: Density=16, Contrast=10
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n on EIB Menu: Parity=Enable Even, Timeout=5
8300
Philips 25-pin RS232 25-to-9 pin
Philips MR Gyroscan T5
Control Cable Host Adaptor Cable
Host Control 232 OUT
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
8300 Setup:
n on 8300 Operator Menu set:
n Density=16
n Contrast=10
n Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=Even
n Modality Group=0
Philips 37-pin
Data Cable
Image Data OUT DEIB
Fiber Cable
Fiber Cable
3 M H Q L as e r I m a ge r
M969 HQ
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
M969 HQ Setup:
n on COMM Menu:
n 959 Default
n on IMAGE Menu:
n TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n on EIB Menu:
n Parity=Enable Even, Timeout=5
M969 HQT
Philips 25-pin RS232 25-to-9 pin
Philips MR Gyroscan T5
Control Cable Host Adaptor Cable 3 M H Q L a ser I m ag e r
Philips 37-pin
Image Data OUT Data Cable
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
Philips 37-pin
Data Cable
Image Data OUT DEIB
Fiber Cable
Fiber Cable
3M L a s er I m ag er
M959 XL
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
n on XL Control Panel set Density & Contrast depending on chemistry
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
n on XL Input Module install LUT 322A0
M959 XL Setup:
n on COMM Menu:
n 959 Default
n on EIB Menu:
n Parity=Enable Even, Timeout=5
RS232 9-pole
Philips 25-pin RS232 25-to-9 pin plug
Philips MR Gyroscan T5 Host Adaptor Cable
Control Cable
Host Control 232 OUT
Philips 37-pin
Data Cable
Image Data OUT
DryView 8100
DPI4-to-DPC Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=5, Parity=Even, Memory=7
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=mrt5, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On
n TFT/ULUT=Pmsv3k.w87, Mem.Full =On, Image Size =On, Alarm Mode=On
n into Defaults: Destination=Printer 1, Media Size=14x17, C=9, D=14
Philips 25-pin
RS232 25-to-9 pin
Philips MR Gyroscan T5 Control Cable
Host Adaptor Cable
Host UKEIB
Host Control 232 OUT Imager
Philips 37-pin
Image Data OUT Data Cable DPC DPC-to-UKEIB Cable
Setup:
n on Gyroscan T5 install Camera Config.File LI3M Plus, LUT=NONE
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=5, Parity=Even, Memory=7
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=mrt5, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On
n TFT/ULUT=Pmsb.w87, Mem.Full =On, Image Size =On, Alarm Mode=On
n into Defaults: Destination=Printer 1, Media Size=14x17, C=9, D=14
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add,Dig.,Qual.=Gyroscan ACS T5 MRI:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= mrt5,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=722, Lines=528, Parity=Even, Timer=5, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add,Dig.,Qual.=Gyroscan ACS T5 MRI:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= mrt5,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=722, Lines=528, Parity=Even, Timer=5, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=2
n Formatting: Pixel Pitch=12.6582
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup:
n Select Destination= KELP 2180, Media Size Select=35x43
n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:
n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline
n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On
n Curve Shape=3.0, Auto Study=Off, Console=On
n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:
n into Machine Setup Menu set: Tonescaling=CurveShape
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add,Dig.,Qual.=Gyroscan ACS T5 MRI:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= mrt5,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=722, Lines=528, Parity=Even, Timer=5, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 1200, RS422, 8, 1, Even
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
n Formatting: Trim Width Enabled=0, Trim Width Disabled=0
n Formatting: Pixel Pitch=12.5
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup:
n Select Destination= KELP 1120, Media Size Select=35x43
n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:
n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline
n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On
n Curve Shape=3.0, Auto Study=Off, Console=On
n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:
n into Machine Setup Menu set: Tonescaling=CurveShape
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
Philips MR
Philips 25-pin 25-to-25 Null Kpad / Host Control
Gyroscan T5 RS23-to-RS422 Dry Vie
w
25-to-15 pin
Fiber Cable
Host Control Converter Box
232 OUT
RS422 37-to-50 pin Fiber Cable
Philips 37-pin
Digital Adaptor Cable
Data Cable
Image Data OUT
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM 200 Destinations
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add,Dig.,Qual.=Gyroscan ACS T5 MRI:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= mr,
n Mod.Name= mr, Primary Control: Type=M952/P831 , Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=722, Lines=528, Parity=Even, Timer=5, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add,Dig.,Qual.=Gyroscan ACS T5 MRI:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= mr,
n Mod.Name= mr, Primary Control: Type=M952/P831 , Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=722, Lines=528, Parity=Even, Timer=5, Sync=On, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4,1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media =35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=O n, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
1
Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1.
2
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1.
3
Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0.
4
setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.
Fiber Cable
Fiber Cable
er
ag
n
t Ma
npu
lti I-
0Mu
88
0
3M
ie w
0Dr yV
3 M870
Fiber Cable
8700 Dual
8800 MIM
Requirements: Gyroview rel. 2.1.2, 8800 rel. 4.2, 8700 rel. 1.15
Setup:
n on Gyroview install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
Fiber Cable
Fiber Cable
View
0 0 Dry
3 M 87
8700 Plus
Setup:
n on Gyroview install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
8700 Standard
Philips 25-pin RS232 25-to-9 pin
Philips Gyroview
Control Cable Host Adaptor Cable
Host Control 232 OUT
yView
700 D r
3M 8
Philips 37-pin
Image Data OUT Data Cable
Fiber Cable
r
na
ge
Ma
put
ti -I n
ul
00M
88
3M
ry Vie w
700 D
3M8
Fiber Cable
8500 Dual
8800 MIM
Requirements: Gyroview rel. 2.1.2, 8800 rel. 5.1, 8500 rel. 1.22
Setup:
n on Gyroview install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
Fiber Cable
Fiber Cable
View
0 0 Dry
3 M 87
8500 Plus
Setup:
n on Gyroview install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
8500 Standard
Philips 25-pin RS232 25-to-9 pin
Philips MR Gyroscan T5
Control Cable Host Adaptor Cable
Host Control 232 OUT
yView
700 D r
3M 8
Philips 37-pin
Image Data OUT Data Cable
Setup:
n on Gyroview install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
Fiber Cable
Fiber Cable
8300 Dual
ager
an
pu
tM
i- In
ult
Fiber Cable
00M
88
3M
8800 MIM
Requirements: Gyroview rel. 2.1.2, 8800 rel. 5.1, 8300 rel. 4.2
Setup:
n on Gyroview install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
8300 Setup:
n on 8300 Operator Menu set:
n Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=None
n Modality Group=0
8800 Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: Density=16, Contrast=10
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n on EIB Menu: Parity=Enable Even, Timeout=5
8300
Philips 25-pin RS232 25-to-9 pin
Philips Gyroview
Control Cable Host Adaptor Cable
Host Control 232 OUT
Setup:
n on Gyroview install Camera Config.File 3M +
8300 Setup:
n on 8300 Operator Menu set:
n Density=16
n Contrast=10
n Film Layout : Format=1on 1, Mode=Portrait
n on 8300 Service Menu set:
n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,
Nbr. of Stop bits=1, Parity=Even, Protocol=3M
n Digital Interface: Parity=Even
n Modality Group=0
Philips 37-pin
Data Cable
Image Data OUT DEIB
Fiber Cable
Fiber Cable
3 M H Q L as e r I m a ge r
M969 HQ
Setup:
n on Gyroview install Camera Config.File 3M +
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
M969 HQ Setup:
n on COMM Menu: 959 Default
n on IMAGE Menu: TFT=PMSV3K, Dmax=3.00, Contrast=9, Density=14
n on HOST Menu:
n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes
n on EIB Menu: Parity=Enable Even, Timeout=5
M969 HQT
Philips 25-pin RS232 25-to-9 pin
Philips Gyroview
Control Cable Host Adaptor Cable 3 M H Q L a ser I m ag e r
Philips 37-pin
Image Data OUT Data Cable
Setup:
n on Gyroview install Camera Config.File 3M +
Philips 37-pin
Data Cable
Image Data OUT DEIB
Fiber Cable
Fiber Cable
3M L a s er I m ag er
M959 XL
Setup:
n on Gyroview install Camera Config.File 3M +
n on XL Control Panel set Density & Contrast depending on chemistry
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
n on XL Input Module install LUT 322A0
M959 XL Setup:
n on COMM Menu:
n 959 Default
n on EIB Menu:
n Parity=Enable Even, Timeout=5
Philips 37-pin
Image Data OUT Data Cable
DryView 8100
DPI4-to-DPC Cable
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers
Setup:
n on Gyroview install Camera Config.File 3M+
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber
n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=5, Parity=Even, Memory=7
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=gv, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
Philips 25-pin
RS232 25-to-9 pin
Philips Gyroview Control Cable
Host Adaptor Cable
Host UKEIB
Host Control 232 OUT Imager
Philips 37-pin
Image Data OUT Data Cable DPC DPC-to-UKEIB Cable
Setup:
n on Gyroview install Camera Config.File 3M+
n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center
9410 Setup:
on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper
n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz
n Film Mismatch=Print Always, Interpolation Type=831
n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0
n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on I/O CARD SETUP, DPI4 Digital Menu:
n Image Data Port: Header, 8 bit, Timeout=5, Parity=Even, Memory=7
n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200
on Device Setup, HOST KEYPADS:
n Kpad=gv, Hosp=philips, Serial=DPI4 A Host, Image=DPI4 A DATA
n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor)
n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On
n TFT/ULUT=Pmsb.w87, Mem.Full =On, Image Size =On, Alarm Mode=On
n into Defaults: Destination=Printer 1, Media Size=14x17, C=9, D=14
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak160, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add,Dig.,Qual.=Gyroview Workstation:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= gv,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=720, Lines=540, Parity=Even, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 9600, RS422, 8, 1, None
n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30,
n General: Database Name=KELI 160, Model=KELI 160
n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)
n Supported Item: Collation=On, Text=On, Tonescaling on Image=On
n Supported Item: Pivot Density=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak2180, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add,Dig.,Qual.=Gyroview Workstation:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= gv,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=720, Lines=540, Parity=Even, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 9600, RS422, 8, 1, None
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180
n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)
n Media Info:Media=35x35cm,4136x4136,4006, (Blue)
n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)
n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
n Format Types: Custom=On, Slide=On, Row Symmetric =On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
2180 Setup:
n Optical Interface board will automatic configure into 2180, no setup needed
MIM200 Setup:
n on Configure, Network:
n Computer Name=eg Kodak1120, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add,Dig.,Qual.=Gyroview Workstation:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= gv,
n Primary Control: Type=KCL, Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=720, Lines=540, Parity=Even, Timer=1, Sync=O ff, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n 9600, RS422, 8, 1, None
n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120
n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly
n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)
n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)
n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)
n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0
1120 Setup:
n Optical Interface board will automatic configure into 1120, no setup needed
25-to-15 pin
Fiber Cable
Host Control Converter Box
232 OUT
RS422 37-to-50 pin Fiber Cable
Philips 37-pin
Digital Adaptor Cable
Data Cable
Image Data OUT
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM 200 Destinations
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add,Dig.,Qual.=Gyroview Workstation:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= gv,
n Mod.Name=gv, Primary Control: Type=M952/P831 , Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=720, Lines=540, Parity=Even, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4, 1200, RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700
n General: Database Name=8700, Model=8700, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
MIM200 Setup:
n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly
n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Config, Input, Direct Connect,Config.Add,Dig.,Qual.=Gyroview Workstation:
n Board/Channel=Digital Board 1 Channel 1, Logical Name= gv,
n Mod.Name=gv, Primary Control: Type=M952/P831 , Com Port=4
n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off
n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:
n Pixels=720, Lines=540, Parity=Even, Timer=1, Sync=Off, Pixel=8
n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set:
n COM4, 1200 , RS422, 8, 1, Even, Mem Full=BSY
n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100
n General: Database Name=8100, Model=8100, Memory=32
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue
n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even
n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On
n Format Types: Custom=On, Slide=On, Row Symmetric=On
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Req.Size Scale=On
n Formatting: Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On
n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2