Documente Academic
Documente Profesional
Documente Cultură
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 October to 31 October 2011
JTC 2
ISO/IEC CD 13273
Joint Project Committee - Energy efficiency and renewable energy sources Common terminology
Energy efficiency and renewable energy sources Common international terminology
TC 20
ISO/NP 13832
TC 22
ISO/NP 8820-3 ISO/NP 11451-4 ISO/CD 14230-2 ISO/NP 12614-1 ISO/NP 12614-2
Road vehicles
Road vehicles Fuse-links Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature) Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI) Road vehicles Diagnostic systems Keyword Protocol 2000 Part 2: Data link layer Road vehicles Liquefied natural gas (LNG) fuel system components Part 1: General requirements and definitions Road vehicles Liquefied natural gas (LNG) fuel system components Part 2: Performance and general test methods
TC 23
ISO 730:2009/NP Amd 1
ISO/CD 3767-5 ISO/CD 13693-1 ISO/CD 16399-1 ISO/CD 16399-2 ISO/CD 16399-3
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 5: Symbols for manual portable forestry machinery Safety devices for chemigation Part 1: Small, non-metallic valves for chemigation Meters for irrigation water Part 1: General requirements Meters for irrigation water Part 2: Installation and conditions for use Meters for irrigation water Part 3: Test methods and equipment
TC 42
ISO/CD 12233 ISO/CD 15739
Photography
Photography Electronic still picture imaging Resolution and spatial frequency responses Photography Electronic still-picture imaging Noise measurements
TC 58
ISO/CD 5145
Gas cylinders
Cylinder valve outlets for gases and gas mixtures Selection and dimensioning
TC 79
ISO/WD 28340
TC 86
ISO/CD 16494
TC 91
ISO/NP 16560
TC 92
ISO/NP TR 16732-2
Fire safety
Fire Safety Engineering Fire risk assessment Part 2: Example of an office building
TC 96
ISO/CD 9926-2
Cranes
Cranes Training of operators Part 2: Mobile cranes
TC 106
ISO/CD 28888
Dentistry
Dentistry Screening method for erosion potential of oral rinses
TC 114
ISO/CD 3764
Horology
Timekeeping instruments Movements Types, dimensions and nomenclature
TC 130
ISO/CD 14298
Graphic technology
Graphic Technology Management of Security Printing Processes
TC 131
ISO/WD TR 17209
TC 150
ISO 8637:2010/CD Amd 1
TC 159
ISO/NP TR 12296
Ergonomics
Ergonomics Manual handling of people in the healthcare sector
TC 184
ISO/NP TS 15926-6
TC 198
ISO 116071:2006/NP Amd 1 ISO 116072:2006/NP Amd 1
TC 201
ISO/CD 16531
TC 204
ISO/NP 17444-1
TC 206
ISO/CD 14544 ISO/CD 14574
Fine ceramics
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compression properties Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties
TC 213
ISO/DTR 14638
TC 229
ISO/DTS 12901-1 ISO/NP TR 13329
Nanotechnologies
Nanotechnologies - Occupational risk management applied to engineered nanomaterials Part 1: Principles and approaches Nanomaterials Preparation of Material Safety Data Sheet (MSDS)
JTC 1
ISO/IEC PDTR 20002 ISO/IEC CD 22536 ISO/IEC 247272:2008/NP Amd 1 ISO/IEC 247273:2008/NP Amd 1 ISO/IEC 247274:2008/NP Amd 1 ISO/IEC PDTR
Information technology
Telecommunications and Information Exchange Between Systems Managed P2P: Framework Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol (NFCIP-1) RF interface test methods Identification cards Integrated circuit card programming interfaces Part 2: Generic card interface Amendment 1: Enhanced discovery mechanism to identify DER or XER encoding of SAL Identification cards Integrated circuit card programming interfaces Part 3: Application interface Amendment 1: Use of the 7816-15-based Registry and XML representation Identification cards Integrated circuit card programming interfaces Part 4: Application programming interface (API) administration Amendment 1: XML representation Information Technology Guide to on-card biometric comparison standards and applications
30117 ISO/IEC 197763:2007/NP Amd 1 ISO/IEC NP 17760-101 ISO/IEC 99952:2009/PDAM 1 ISO/IEC CD 999510 ISO/IEC CD 24752-2 ISO/IEC CD 24752-6 ISO/IEC PDTR 30102 Information technology Computer graphics, image processing and environmental data representation Extensible 3D (X3D) encodings Part 3: Compressed binary encoding Amendment 1 Information Technology AT Attachment 8 Part 101: ATA/ATAPI Command Set (ATA8-ACS) Information technology Keyboard layouts for text and office systems Part 2: Alphanumeric section Amendment 1: Numeric keypad emulation Conventional symbols and methods to represent graphic characters not uniquely recognizable by their glyph on a keyboard and in documentation Part 10: Information technology User interfaces Universal remote console Part 2: User interface socket description Information technology User interfaces Universal remote console Part 6: Web service integration General technical principles of Service Oriented Architecture (SOA)
DIS circulated
Period from 01 October to 31 October 2011 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. * Available in English only
Vote terminates
TC 4
ISO/DIS 3228 *
Rolling bearings
Rolling bearings Cast and pressed housings for insert bearings Boundary dimensions and tolerances (Revision of ISO 3228:1993) 2012-03-22
TC 6
ISO/DIS 6588-1 *
ISO/DIS 6588-2 *
Paper, board and pulps Determination of pH of aqueous extracts Part 2: Hot extraction (Revision of ISO 6588-2:2005)
2012-03-11
TC 8
ISO/DIS 30004 *
TC 17
ISO/DIS 16162 *
Steel
Cold-rolled steel sheet products Dimensional and shape tolerances (Revision of ISO 16162:2010) 2012-03-22
ISO/DIS 16163
Continuously hot-dipped coated steel sheet products Dimensional and shape tolerances (Revision of ISO 16163:2010)
2012-03-22
TC 22
ISO/DIS 22900- * 3
Road vehicles
Road vehicles Modular vehicle communication interface (MVCI) Part 3: Diagnostic server application programming interface (D-Server API) (Revision of ISO 22900-3:2009) 2012-03-29
TC 23
ISO/DIS 11783- * 14.2
TC 34
ISO/DIS 5526 *
Food products
Cereals, pulses and other food grains Nomenclature (Revision of ISO 5526:1986) 2012-03-21
Microbiology of food and animal feeding stuffs General requirements and guidance for microbiological examinations Amendment 1
2012-03-14
Animal feeding stuffs Determination of lysine, methionine and threonine in commercial amino acid products and premixtures Foodstuffs General requirements for molecular biology analysis for detection and identification of destructive organisms in plants and derived products
2012-03-14
ISO/DIS 13484
2012-03-11
TC 35
ISO/DIS 16482- * 1 ISO/DIS 16482- * 2
2012-04-01
TC 38
ISO/DIS 13015 *
Textiles
Woven fabrics Distortion Determination of skew and bow 2012-03-21
TC 41
ISO/DIS 5294 *
TC 59
ISO/DIS 21929- * 2
TC 61
ISO * 17282:2004/DA md 1
Plastics
Plastics Guide to the acquisition and presentation of design data Amendment 1 2012-03-11
TC 67
ISO/DIS 13628- * 14
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
Petroleum and natural gas industries Design and operation of subsea production systems Part 14: Subsea high integrity pressure protection systems (HIPPS) 2012-03-14
TC 70
ISO/DIS 8528-5 *
TC 84
ISO/DIS 10555- * 4
ISO/DIS 10555- * 5
Intravascular catheters Sterile and single-use catheters Part 5: Over-needle peripheral catheters (Revision of ISO 10555-5:1996, ISO 10555-5:1996/Amd 1:1999, ISO 105555:1996/Cor 1:2002)
2012-03-07
TC 92
ISO/DIS 19701 *
Fire safety
Methods for sampling and analysis of fire effluents (Revision of ISO 19701:2005) 2012-03-26
TC 94
ISO/DIS 16900- * 3.3
TC 106
ISO/DIS 1797-3 *
Dentistry
Dentistry Shanks for rotary instruments Part 3: Shanks made of ceramics 2012-03-28
TC 108
ISO/DIS 21940- * 21
TC 118
ISO/DIS 3857-4 *
TC 121
ISO 73961:2007/DAmd 3 *
TC 126
ISO/DIS 10315 *
* *
Cigarettes Determination of menthol in smoke condensates Gaschromatographic method Tobacco and tobacco products Determination of water content Gas-
2012-03-12 2012-03-08
TC 131
ISO/DIS 6358-3 *
TC 145
ISO 7010:2011/DA md 109 ISO 7010:2011/DA md 110 ISO 7010:2011/DA md 111 ISO 7010:2011/DA md 112 ISO 7010:2011/DA md 113 ISO 7010:2011/DA md 114 ISO 7010:2011/DA md 115 ISO 7010:2011/DA md 116 ISO 7010:2011/DA md 117 ISO 7010:2011/DA md 118 *
Graphical symbols
Graphical symbols Safety colours and safety signs Registered safety signs Amendment 109: Safety sign M033: Close safety bar of chairlift Graphical symbols Safety colours and safety signs Registered safety signs Amendment 110: Safety sign M034: Open safety bar of chairlift Graphical symbols Safety colours and safety signs Registered safety signs Amendment 111: Safety sign M035: Immediately leave the tow-track in the event of falling Graphical symbols Safety colours and safety signs Registered safety signs Amendment 112: Safety sign M036: Lift ski tips Graphical symbols Safety colours and safety signs Registered safety signs Amendment 113: Safety sign P037: Do not leave the tow-track Graphical symbols Safety colours and safety signs Registered safety signs Amendment 114: Safety sign P038: Do not swing the chair Graphical symbols Safety colours and safety signs Registered safety signs Amendment 115: Safety sign E024: Evacuation temporary refuge Graphical symbols Safety colours and safety signs Registered safety signs Amendment 116: Safety sign E025: Emergency call point Graphical symbols Safety colours and safety signs Registered safety signs Amendment 117: Safety sign E026: First aid call point Graphical symbols Safety colours and safety signs Registered safety signs Amendment 118: Safety sign F007: Fire alarm sounder 2012-03-28
2012-03-28
2012-03-28
2012-03-28
2012-03-28
2012-03-28
2012-03-05
2012-03-05
2012-03-05
2012-03-05
TC 146
ISO/DIS 16911- * 1 ISO/DIS 16911- * 2 ISO/DIS 14382 *
Air quality
Stationary source emissions Determination of velocity and volume flow rate in ducts Part 1: Manual reference method Stationary source emissions Determination of velocity and volume flow rate in ducts Part 2: Automated measuring systems Workplace atmospheres Determination of toluene diisocyanate vapours using 1-(2-pyridyl)piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors 2012-03-14 2012-03-14 2012-03-05
TC 147
ISO/DIS 14189
Water quality
Water quality Enumeration of Clostridium perfringens Method using membrane filtration 2012-03-22
TC 150
ISO/DIS 14708- * 7
TC 156
ISO/DIS 7539-1 *
ISO/DIS 16701
Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (Revision of ISO 16701:2003)
2012-03-21
TC 168
ISO * 10328:2006/DA md 1 ISO * 22675:2006/DA md 1
2012-03-28
TC 172
ISO/DIS 9211-4 *
ISO/DIS 8980-3 *
Ophthalmic optics Uncut finished spectacle lenses Part 3: Transmittance specifications and test methods (Revision of ISO 8980-3:2003)
2012-03-14
ISO/DIS 14889
Ophthalmic optics Spectacle lenses Fundamental requirements for uncut finished lenses (Revision of ISO 14889:2003)
2012-03-21
ISO/DIS 22665
Ophthalmic optics and instruments - Instruments to measure axial distances in the eye
2012-03-14
TC 184
ISO/DIS 14306
ISO/DIS 22400- * 2
Automation systems and integration Key performance indicators for manufacturing operations management Part 2: Definitions and descriptions
2012-03-05
TC 190
ISO/DIS 17380 *
Soil quality
Soil quality Determination of total cyanide and easily liberatable cyanide Continuous-flow analysis method (Revision of ISO 17380:2004) 2012-03-14
TC 201
ISO/DIS 11952 *
TC 206
ISO/DIS 22197- *
Fine ceramics
Fine ceramics (advanced ceramics, advanced technical ceramics) Test 2012-03-04
4 ISO/DIS 22197- * 5
method for air-purification performance of semiconducting photocatalytic materials Part 4: Removal of formaldehyde Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 5: Removal of methyl mercaptan 2012-03-04
TC 211
ISO/DIS 19153 *
Geographic information/Geomatics
Geospatial Digital Rights Management Reference Model (GeoDRM RM) 2012-03-19
TC 213
ISO/DIS 25178- * 605
TC 219
ISO/DIS 4919.2 *
Floor coverings
Carpets Determination of tuft withdrawal force (Revision of ISO 4919:1978) 2011-12-18
* *
Resilient floor coverings Specification for rubber sheet floor coverings with backing Resilient floor coverings Specification for rubber sheet floor coverings without backing
2011-12-19 2011-12-19
TC 223
ISO/DIS 22311 *
Societal security
Societal security - Video-surveillance - Export interoperability 2012-03-11
TC 228
ISO/DIS 28621
JTC 1
ISO/IEC DIS 17826 ISO/IEC DIS 27037 ISO/IEC 197949:2011/DAmd 1
Information technology
Information technology Cloud Data Management Interface (CDMI) Information technology Security techniques Guidelines for identification, collection, acquisition and preservation of digital evidence Information technology Biometric data interchange formats Part 9: Vascular image data Amendment 1: Conformance testing methodology 2012-03-22 2012-04-01 2012-03-11
FDIS circulated
Period from 01 October to 31 October 2011
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
Vote terminates
CIE
ISO/FDIS 11664-3 ISO/FDIS 17731
TC 6
ISO/FDIS 5628
TC 39
ISO/FDIS 230-1
Machine tools
* Test code for machine tools Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions (Revision of ISO 230-1:1996) 2011-12-18
TC 43
ISO/FDIS 28961
Acoustics
* Acoustics Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions * Acoustics Measurement of room acoustic parameters Part 3: Open plan offices 2011-12-14
ISO/FDIS 3382-3
2011-12-14
TC 44
ISO/FDIS 14174
ISO 156141:2004/FDAmd 2
* Specification and qualification of welding procedures for metallic materials Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys Amendment 2
2012-01-21
TC 45
ISO/FDIS 14932
TC 92
ISO/FDIS 16732-1
Fire safety
* Fire safety engineering Fire risk assessment Part 1: General (Revision of ISO/TS 16732:2005) 2011-12-29
TC 94
ISO/FDIS 20347
TC 106
ISO/FDIS 20126
Dentistry
* Dentistry Manual toothbrushes General requirements and test methods (Revision of ISO 20126:2005) 2011-12-28
TC 114
ISO/FDIS 10552
Horology
* Timekeeping instruments Crowns and sealed tubes Designs and dimensions (Revision of ISO 10552:1999) 2011-12-12
TC 127
ISO/FDIS 15817
Earth-moving machinery
* Earth-moving machinery Safety requirements for remote operator control systems (Revision of ISO 15817:2005) 2012-01-01
TC 146
ISO/FDIS 13138
Air quality
* Air quality Sampling conventions for airborne particle deposition in the human respiratory system 2011-12-21
TC 150
ISO/FDIS 14242-1
TC 156
ISO/FDIS 17474
TC 204
ISO/FDIS 12855
TC 205
ISO/FDIS 16817
TC 211
ISO/FDIS 19148
Geographic information/Geomatics
* Geographic information Linear referencing 2011-12-21
IULTCS
ISO/FDIS 2419
JTC 1
Information technology
2011-12-29
ISO/IEC FDIS 20000- * Information technology Service management Part 2: Guidance on the 2 application of service management systems (Revision of ISO/IEC 20000-2:2005) ISO/IEC 7810:2003/FDAmd 2 ISO/IEC FDIS 145435-3 ISO/IEC FDIS 28360 Identification cards Physical characteristics Amendment 2: Opacity Information technology Home electronic system (HES) architecture Part 5-3: Intelligent grouping and resource sharing for HES Class 2 and Class 3 Basic application * Information technology Office equipment Determination of chemical emission rates from electronic equipment (Revision of ISO/IEC 28360:2007, ISO/IEC 28360:2007/Cor 1:2008)
2011-12-29 2012-01-05
2011-12-28
* Information technology Coding of audio-visual objects Part 12: ISO base media file format Amendment 3: DASH support and RTP reception hint track processing * Information technology JPEG 2000 image coding system Part 12: ISO base media file format Amendment 3: DASH support and RTP reception hint track processing * Information technology Rich media user interfaces Part 1: Widgets Amendment 1: Widget extensions * Information technology Mobile item identification and management Mobile AIDC application programming interface
2011-12-08
2011-12-08
2011-12-18 2012-01-01
Standards published
New International Standards published between 01 October and 31 October 2011 * Available in English only ** French version of standard previously published in English only
Price group
TC 2
ISO 4753:2011
Fasteners
Fasteners Ends of parts with external ISO metric thread C
TC 6
ISO 3035:2011
TC 8
ISO/PAS 30004:2011 ISO 11674:2006 *
TC 17
ISO 16172:2011 *
Steel
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe E
TC 20
ISO/PAS 21100:2011 *
TC 22
Road vehicles
Road vehicles 60 V and 600 V single-core cables Part 1: Dimensions, test methods and requirements for copper conductor cables Road vehicles Open Test sequence eXchange format (OTX) Part 1: General information and use cases Road vehicles Diagnostic communication over Internet Protocol (DoIP) Part 1: General information and use case definition Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 1: General information and use case definition
S K H D
TC 23
ISO/TR 22521:2005
TC 34
ISO 7700-2:2011 ISO 7301:2011 ISO 7970:2011 ISO 12779:2011 ISO 27871:2011 ISO 3972:2011 ISO 6666:2011 *
Food products
Food products Checking the performance of moisture meters in use Part 2: Moisture meters for oilseeds Rice Specification Wheat (Triticum aestivum L.) Specification Lactose Determination of water content Karl Fischer method Cheese and processed cheese Determination of the nitrogenous fractions Sensory analysis Methodology Method of investigating sensitivity of taste Coffee sampling Triers for green coffee or raw coffee and parchment coffee D K F E E E B
TC 35
ISO 1518-2:2011 ISO 7783:2011 ISO 12137:2011
TC 38
ISO 105B10:2011 ISO 2959:2011
Textiles
Textiles Tests for colour fastness Part B10: Artificial weathering Exposure to filtered xenon-arc radiation Textiles Woven fabric descriptions G A
TC 42
ISO 18934:2011 *
Photography
Imaging materials Multiple media archives Storage environment E
TC 44
ISO 5173:2009/Amd 1:2011
TC 45
ISO 8331:2007 ISO 30013:2011 ISO 34-2:2011
Small (Delft) test pieces ISO 248-1:2011 ISO 2921:2011 ISO 13226:2011 ISO 2475:2011 ISO 8511:2011 ISO 11852:2011 Rubber, raw Determination of volatile-matter content Part 1: Hot-mill method and oven method Rubber, vulcanized Determination of low-temperature retraction (TR test) Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers Chloroprene rubber (CR) General-purpose types Evaluation procedure Rubber compounding ingredients Carbon black Determination of pellet size distribution Rubber Determination of magnesium content of field and concentrated natural rubber latex by titration G D N F C E
TC 61
ISO * 14898:1999/Amd 1:2011
Plastics
Plastics Aromatic isocyanates for use in the production of polyurethane Determination of acidity Amendment 1 XZ
TC 67
ISO 20312:2011 ISO 135031:2011 ISO 13678:2010 * *
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
Petroleum and natural gas industries Design and operating limits of drill strings with aluminium alloy components Petroleum and natural gas industries Completion fluids and materials Part 1: Measurement of viscous properties of completion fluids Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements U K T
TC 76
ISO 15378:2011
Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
Primary packaging materials for medicinal products Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) V
TC 85
ISO 178743:2011
TC 86
ISO 15042:2011
TC 92
ISO 56582:2006/Amd 1:2011 ISO 12949:2011 *
Fire safety
Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration Amendment 1 Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets XZ
TC 107
ISO 6370-2:2011 *
TC 110
ISO 2291511:2011
Industrial trucks
Industrial trucks Verification of stability Part 11: Industrial variable-reach trucks C
TC 121
ISO 8835-7:2011 * ISO 80601-212:2011/Cor 1:2011
TC 123
ISO 4381:2011 *
Plain bearings
Plain bearings Tin casting alloys for multilayer plain bearings C
TC 127
ISO 3450:2011
Earth-moving machinery
Earth-moving machinery Wheeled or high-speed rubber-tracked machines Performance requirements and test procedures for brake systems M
TC 130
ISO/TR 12705:2011 *
Graphic technology
Graphic technology Laboratory test method for chemical ghosting in lithography C
TC 131
ISO 15524:2011 ISO 4397:2011 ISO 16873:2011 *
TC 135
ISO/TS 11774:2011 *
Non-destructive testing
Non-destructive testing Performance-based qualification F
TC 138
ISO 112967:2011 ISO 13272:2011
B B
TC 142
ISO 294631:2011 ISO 294632:2011 ISO 294633:2011 ISO 294634:2011 ISO 294635:2011 * * * * *
TC 146
ISO 160003:2011
Air quality
Indoor air Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air Active sampling method N
TC 147
ISO 13162:2011
Water quality
Water quality Determination of carbon 14 activity Liquid scintillation counting method L
TC 156
ISO 7539-6:2011
TC 164
ISO 262032:2011
TC 165
ISO 8969:2011
Timber structures
Timber structures Testing of punched metal plate fasteners and joints L
TC 184
ISO 1553144:2010 ISO/TS 159267:2011 ISO/TS 159268:2011 *
TC 201
ISO 20903:2011 *
TC 202
ISO 13067:2011 ISO 22309:2011 *
Microbeam analysis
Microbeam analysis Electron backscatter diffraction Measurement of average grain size Microbeam analysis Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above J L
TC 204
ISO 14906:2011
XA
XB
TC 211
Geographic information/Geomatics
ISO 19118:2011
TC 212
ISO 15193:2009 *
TC 213
ISO 155303:2011
TC 215
ISO/TS 14265:2011 *
Health informatics
Health Informatics - Classification of purposes for processing personal health information G
TC 229
ISO/TS 10798:2011 ISO/TS 13278:2011 *
Nanotechnologies
Nanotechnologies Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis Nanotechnologies Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry M
TC 230
ISO 106671:2011 ISO 106672:2011 *
JTC 1
ISO/IEC 144432:2010/Amd 1:2011 ISO/IEC 144433:2011/Amd 1:2011 ISO/IEC 180134:2011 ISO/IEC TR 24733:2011 ISO/IEC 14776372:2011 ISO/IEC 2934119-10:2011 ISO/IEC TR 27008:2011 ISO/IEC 144963:2009/Cor 2:2011 ISO/IEC 144964:2004/Amd 40:2011 *
Information technology
Identification cards Contactless integrated circuit cards Proximity cards Part 2: Radio frequency power and signal interface Amendment 1: Limits of electromagnetic disturbance levels parasitically generated by the PICC Identification cards Contactless integrated circuit cards Proximity cards Part 3: Initialization and anticollision Amendment 1: Electromagnetic disturbance handling and single-size unique identifier Information technology Personal identification ISO-compliant driving licence Part 4: Test methods Information technology Programming languages, their environments and system software interfaces Extensions for the programming language C++ to support decimal floating-point arithmetic Information technology Small Computer System Interface (SCSI) Part 372: SCSI Enclosure Services - 2 (SES-2) Information technology UPnP Device Architecture Part 19-10: Solar Protection Blind Device Control Protocol Two Way Motion Motor Service Information technology Security techniques Guidelines for auditors on information security controls Information technology Coding of audio-visual objects Part 3: Audio Technical Corrigendum 2 Information technology Coding of audio-visual objects Part 4: Conformance testing Amendment 40: ExtendedCore2D conformance XZ
XZ
* *
XH U
* * * *
XA J R free
XZ
ISO/IEC 144965:2001/Amd 29:2011 ISO/IEC 144965:2001/Amd 5:2004/Cor 1:2011 ISO/IEC 144965:2001/Amd 10:2007/Cor 5:2011 ISO/IEC 1449615:2010/Amd 1:2011 ISO/IEC 1449616:2011 ISO/IEC 1449626:2010/Cor 4:2011 ISO/IEC TR 159388:2002/Amd 6:2011 ISO/IEC 210008:2008/Amd 2:2011 ISO/IEC 230031:2007/Amd 1:2008/Cor 1:2011 ISO/IEC 230031:2007/Amd 2:2008/Cor 2:2011 ISO/IEC 230057:2011 ISO/IEC 180461:2011 ISO/IEC 247912:2011 ISO/IEC TR 29158:2011 ISO/IEC 29176:2011 ISO/IEC 1975711:2011 ISO/IEC TR 24754-2:2011 ISO/IEC 197944:2005/Cor 1:2011
Information technology Coding of audio-visual objects Part 5: Reference software Amendment 29: Reference software for LASeR presentation and modification of structured information (PMSI) tools Information technology Coding of audio-visual objects Part 5: Reference software Amendment 5: Reference software extensions for error resilient simple scalable profile Technical Corrigendum 1 Information technology Coding of audio-visual objects Part 5: Reference software Amendment 10: SSC, DST, ALS and SLS reference software Technical Corrigendum 5 Information technology Coding of audio-visual objects Part 15: Advanced Video Coding (AVC) file format Amendment 1: Sub-track definitions Information technology Coding of audio-visual objects Part 16: Animation Framework eXtension (AFX) Information technology Coding of audio-visual objects Part 26: Audio conformance Technical Corrigendum 4 Information technology Multimedia content description interface Part 8: Extraction and use of MPEG-7 descriptions Amendment 6: Extraction and matching of video signature tools Information technology Multimedia framework (MPEG-21) Part 8: Reference software Amendment 2: Reference software for media value chain ontology (MVCO) Information technology MPEG audio technologies Part 1: MPEG Surround Amendment 1: Conformance testing Technical Corrigendum 1
XZ
free
free
XZ
* *
XJ free
XZ
XZ
free
Information technology MPEG audio technologies Part 1: MPEG Surround Amendment 2: Reference software Technical Corrigendum 2
free
* * * * * * *
Information technology Media context and control Part 7: Conformance and reference software Information technology Radio frequency identification device performance test methods Part 1: Test methods for system performance Information technology Radio frequency identification (RFID) for item management Software system infrastructure Part 2: Data management Information technology Automatic identification and data capture techniques Direct Part Mark (DPM) Quality Guideline Information technology Mobile item identification and management Consumer privacy-protection protocol for Mobile RFID services Information technology Document Schema Definition Languages (DSDL) Part 11: Schema association Information technology Document description and processing languages Minimum requirements for specifying document rendering systems Part 2: Formatting specifications for document rendering systems Information technology Biometric data interchange formats Part 4: Finger image data Technical Corrigendum 1
S V K J E C M
free
Standards confirmed
The following International Standards are confimred for a five year period:
TC 23
ISO 789-1:1990 ISO 789-5:1983 ISO 789-11:1996 ISO 5696:1984 ISO 12003-1:2008 ISO 12003-2:2008 ISO 9911:2006
TC 25
ISO 2892:2007 ISO 17804:2005
TC 34
ISO 1739:2006 ISO 5550:2006 ISO/TS 6733:2006 ISO 11815:2007 ISO 3509:2005 ISO 6668:2008 ISO 10470:2004 ISO 20481:2008 ISO/TS 21098:2005
Food products
TC 41
ISO 255:1990 ISO 1604:1989 ISO 3410:1989 ISO 4183:1995 ISO 4184:1992
ISO 9608:1994
(reconfirmed)
TC 42
ISO 732:2000 ISO 1007:2000 ISO 1012:1998 ISO 1203:1998 ISO 1230:2007 ISO 2240:2003 ISO 2827:1988 ISO 5989:1995 ISO 7004:2002 ISO 7589:2002 ISO 7766:2003 ISO 9236-1:2004 ISO 9378:1993 ISO 9848:2003 ISO 10330:2002 ISO 10349-1:2002 ISO 10349-8:2002 ISO 10349-13:2002 ISO 12232:2006 ISO 14548:1998 ISO 16067-1:2003 ISO 17531:2002 ISO 18055-1:2004 ISO 18916:2007 ISO 18922:2003 ISO 18935:2005 ISO 20462-1:2005 ISO 20462-2:2005
Photography
(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)
(reconfirmed) (reconfirmed)
(reconfirmed)
(reconfirmed)
TC 45
ISO 1434:1995 ISO 1420:2001 ISO 1798:2008 ISO 2439:2008
ISO 3302-1:1996 ISO 3302-2:2008 ISO 4637:1979 ISO 6447:1983 ISO 6916-2:2001 ISO 7617-1:2001 ISO 8067:2008 ISO 11193-2:2006 ISO 24999:2008
(reconfirmed)
TC 47
ISO 739:1976 ISO 740:1976 ISO 746:1976 ISO 758:1976 ISO 904:1976 ISO 918:1983 ISO 979:1974 ISO 981:1973 ISO 1552:1976 ISO 1686:1976 ISO 1689:1976 ISO 1690:1976 ISO 1691:1976 ISO 1692:1976 ISO 2096:1972 ISO 2120:1972 ISO 2121:1972 ISO 2122:1972 ISO 2227:1972 ISO 2479:1972 ISO 2480:1972 ISO 2481:1973 ISO 2482:1973 ISO 2483:1973 ISO 2762:1973 ISO 2831:1973 ISO 2832:1973
Chemistry
(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)
ISO 2833:1973 ISO 2997:1974 ISO 3137:1974 ISO 3139:1976 ISO 3165:1976 ISO 3195:1975 ISO 3196:1975 ISO 3357:1975 ISO 3360:1976 ISO 3428:1976 ISO 3696:1987 ISO 3706:1976 ISO 3707:1976 ISO 4281:1977 ISO 4285:1977 ISO 5373:1981 ISO 5440:1978 ISO 5444:1978 ISO 5993:1979 ISO 6206:1979 ISO 8213:1986 (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)
TC 63
ISO 9008:1991 ISO 9009:1991 ISO 9885:1991
Glass containers
(reconfirmed) (reconfirmed) (reconfirmed)
TC 89
ISO 2426-1:2000 ISO 2426-2:2000 ISO 2426-3:2000
Wood-based panels
(reconfirmed) (reconfirmed) (reconfirmed)
TC 94
ISO 9185:2007
TC 108
ISO 5349-2:2001
TC 126
ISO 12194:1995 ISO 12195:1995
TC 130
ISO 2834-3:2008
Graphic technology
ISO 2846-4:2000 ISO 12635:2008 ISO 12637-2:2008 ISO 12637-4:2008 ISO 12644:1996 ISO 15930-1:2001
(reconfirmed)
(reconfirmed) (reconfirmed)
TC 131
ISO 6150:1988
TC 138
ISO/TS 21003-7:2008
TC 149
ISO 6697:1994
Cycles
(reconfirmed)
TC 160
ISO 16293-1:2008
Glass in building
TC 164
ISO 20482:2003
TC 165
ISO 16572:2008
Timber structures
TC 171
ISO 3272-6:2000 ISO 9878:1990 ISO 11962:2002 ISO 12650:1999 ISO 24517-1:2008
(reconfirmed)
TC 172
ISO 9022-5:1994 ISO 9022-18:1994 ISO 9022-21:1998
TC 214
ISO 16369:2007 ISO 16653-1:2008
TC 219
ISO 25620:2008 ISO 26985:2008
Floor coverings
JTC 1
ISO/IEC 9834-6:2005
Information technology
ISO/IEC 11572:2000 ISO/IEC 11574:2000 ISO/IEC 17309:2000 ISO/IEC 17310:2000 ISO/IEC 17311:2000 ISO/IEC 17875:2000 ISO/IEC 17877:2000 ISO/IEC 22534:2005 ISO/IEC 23915:2005 ISO/IEC 23916:2005 ISO/IEC 19794-1:2006 ISO/IEC 19794-9:2007
Standards withdrawn
Period from 01 October to 31 October 2011
TC 35
ISO 7783-1:1996 ISO 7783-2:1999 ISO 12137-1:1997 ISO 12137-2:1997
TC 45
ISO 8580:1987 ISO 11758:1995 ISO 248:2005
TC 213
ISO/TS 15530-3:2004
JTC 1
ISO/IEC 18046:2006
Information technology
(replaced by ISO/IEC 18046-3:2007, ISO/IEC 18046-1:2011, ISO/IEC 18046-2:2011)
Meeting calendar
(update at 01 October 2011) Meetings called for the month of September are not in this edition. * Information definite but meeting not yet formally convened ** Provisional
November 2011
2-3 2-3 2-3 3 3-4 4 4 4 4 Houston (USA) Pirmasens (Germany) Winterthur (Switzerland) Kyoto (Japan) Washington, D.C * (USA) Troy (USA) Troy (USA) Detroit (USA) Cincinnati (USA) TC 67/SC 7 TC 137 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures Footwear sizing designations and marking systems
TC 172/SC 6 Optics and photonics/Geodetic and surveying instruments TC 33 TC 85/SC 6 Refractories Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
TC 22/SC 10 Road vehicles/Impact test procedures TC 22/SC 12 Road vehicles/Passive safety crash protection systems TC 22/SC 21 Road vehicles/Electrically propelled road vehicles TC 60 Gears
7-11 Osaka (Japan) 7-11 Beijing (China) 7-12 San Diego (USA) 10 10 1011 11 14 1418 1517 Gaithersburg (USA) Sao Paulo (Brazil) Washington, D.C (USA) Venice (Italy) Tel Aviv (Israel) Auckland (New Zealand) London (United Kingdom) *
TC 94/SC 13 Personal safety -- Protective clothing and equipment/Protective clothing TC 223 JTC 1 TC 30/SC 7 TC 250 TC 260 TC 227 Societal security Information technology Measurement of fluid flow in closed conduits/Volume methods including water meters Project committee: Sustainability in event management Human resource management Springs
TC 23/SC 18 Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems TC 217 TC 189 Cosmetics Ceramic tile
Pau (France) Munich (Germany) Pretoria (South Africa) Johannesburg (South Africa) Berlin (Germany) Rome (Italy) London (United Kingdom) Boulogne sur Mer (France) Berlin (Germany) Stellenbosch (South Africa) Stellenbosch (South Africa) London (United Kingdom) Stellenbosch (South Africa) London (United Kingdom) La Plaine StDenis (France) *
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements
TC 44/SC 12 Welding and allied processes/Soldering materials TC 211 TC 229 TC 44/SC 8 TC 34/SC 4 Geographic information/Geomatics Nanotechnologies Welding and allied processes/Equipment for gas welding, cutting and allied processes Food products/Cereals and pulses
TC 59/SC 14 Buildings and civil engineering works/Design life TC 234 TC 259 TC 98/SC 2 TC 98/SC 3 TC 59/SC 2 TC 98 TC 20 Fisheries and aquaculture Project committee: Outsourcing Bases for design of structures/Reliability of structures Bases for design of structures/Loads, forces and other actions Buildings and civil engineering works/Terminology and harmonization of languages Bases for design of structures Aircraft and space vehicles
November-December 2011
29-1 Vancouver (Canada) TC 252 Project committee: Natural gas fuelling stations for vehicles
December 2011
1-2 2 2 2 7-8 8-9 1216 1314 Troy (USA) Linz (Austria) Brussels (Belgium) La Plaine StDenis (France) La Plaine StDenis (France) Kingston (Jamaica) Sydney (Australia) Heidelberg (Germany) TC 22/SC 11 Road vehicles/Safety glazing materials TC 44/SC 6 TC 94/SC 3 TC 158 TC 17/SC 3 TC 93 Welding and allied processes/Resistance welding and allied mechanical joining Personal safety -- Protective clothing and equipment/Foot protection Analysis of gases Steel/Steels for structural purposes Starch (including derivatives and by-products)
TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machines TC 23/SC 15 Tractors and machinery for agriculture and forestry/Machinery for forestry
15 16
TC 197
Hydrogen technologies
January 2012
1112 1213 1620 Paris (France) Buenos Aires (Argentina) Tokyo (Japan) TC 257 TC 58/SC 4 TC 247 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions Gas cylinders/Operational requirements for gas cylinders Fraud countermeasures and controls Dimensional and geometrical product specifications and verification
January-February 2012
30-4 Paris (France) TC 236 Project Committee: Project Management
February 2012
2 Paris (France) * TC 258 TC 251 Project, programme and portfolio management Project committee: Asset management
6-10 Cape Town (South Africa) 1314 1314 1317 1516 2024 2024 21 2123 2223 Orlando (USA) Orlando (USA)
TC 184/SC 2 Automation systems and integration/Robots and robotic devices TC 219 TC 262 TMB JTC 1/SC 6 * JTC 1/SC 35 TC 23/SC 2 Floor coverings Project committee: Risk management Technical Management Board Information technology/Telecommunications and information exchange between systems Information technology/User interfaces Tractors and machinery for agriculture and forestry/Common tests
Dublin (Ireland) * Geneva (Switzerland) Guangzhou (China) Kyoto (Japan) Paris (France) Nara (Japan) Courbevoie, Paris (France) Florida (USA)
TC 172/SC 9 Optics and photonics/Electro-optical systems TC 23/SC 14 Tractors and machinery for agriculture and forestry/Operator controls, operator symbols and other displays, operator manuals ** TC 115 Pumps
February-March 2012
28-2 Berlin (Germany)** TC 107 Metallic and other inorganic coatings
March 2012
1316 2023 2627 2830 29 Milan (Italy) Buenos Aires (Argentina) * TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments JTC 2 Joint Project Committee - Energy efficiency and renewable energy sources Common terminology
TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually portable forest machinery TC 23/SC 13 Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment TC 23/SC 19 Tractors and machinery for agriculture and forestry/Agricultural electronics
(Germany)
April 2012
1520 1520 1520 16 1617 1620 1620 1620 17 18 1920 20 2327 2327 2327 2328 2526 (Unknown) (Unknown) (Unknown) ** TC 110 Industrial trucks
** TC 110/SC 1 Industrial trucks/General terminology ** TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks Control and protective devices for gas and/or oil burners and appliances Particle characterization including sieving/Particle characterization Sterilization of health care products Intelligent transport systems Project committee: Sustainability criteria for bioenergy Fans Welding and allied processes/Health and safety
Berlin (Germany)** TC 161 Graz (Austria) La Plaine StDenis (France) Melbourne (Australia) Chicago (USA) Senlis (France) Milan (Italy) Toulouse (France) Durban (South Africa) * * TC 24/SC 4 TC 198
** TC 204 * TC 248
** TC 117 ** TC 44/SC 9 *
** TC 59/SC 14 Buildings and civil engineering works/Design life ** TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures ** TC 130 Graphic technology Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems Hydrometry
May 2012
6-10 Haifa (Israel) * TC 184/SC 5 Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications Information and documentation Information and documentation/Technical interoperability
7-11 Berlin (Germany)** TC 46 7-11 Berlin (Germany)** TC 46/SC 4 7-11 Berlin (Germany)* 8 Chicago (USA)
** TC 68/SC 7 * *
TC 145/SC 1 Graphical symbols/Public information symbols TC 68 TC 24/SC 8 Financial services Particle characterization including sieving/Test sieves, sieving and industrial
Berlin (Germany)*
11 1415 1415 1516 1517 2025 2025 2123 2125 22 22 Stockholm (Sweden) Rio de Janeiro (Brazil) Luzern (Switzerland) Buenos Aires (Argentina) Jeju (Korea, Republic of) Seoul (Korea, Republic of) Daejon (Korea, Republic of) * JTC 1/SC 27
screens Information technology/IT Security techniques Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment Tractors and machinery for agriculture and forestry/Safety and comfort Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe Information technology/Software and systems engineering Tourism and related services Traditional chinese medicine Information technology/Distributed application platforms and services (DAPS) Building construction machinery and equipment
** TC 228 * TC 249
Berlin (Germany)** JTC 1/SC 38 Delft (Netherlands) Delft (Netherlands) (Australia) ** TC 195 *
TC 195/SC 1 Building construction machinery and equipment/Machinery and equipment for concrete work Graphical symbols
** TC 145
June 2012
4-8 4-8 6-7 1112 1113 1115 1115 1115 1116 1213 1314 14 1415 Paris (France) ** TC 85 TC 94/SC 6 Nuclear energy, nuclear technologies, and radiological protection Personal safety -- Protective clothing and equipment/Eye and face protection Committee on consumer policy Welding and allied processes/Equipment for gas welding, cutting and allied processes Tobacco and tobacco products Anaesthetic and respiratory equipment
St Paul, * Minnesota (USA) Geneva (Switzerland) Paris (France) Dresden (Germany) Kyoto (Japan) Kyoto (Japan) Prague (Czech Republic) La Plaine StDenis (France) (France) Geneva (Switzerland) Westminster, Colorado (USA) (Europe)
** TC 121/SC 1 Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic machines ** TC 251 * TC 147 Project committee: Asset management Water quality
** TC 17/SC 17 Steel/Steel wire rod and wire products * TMB Technical Management Board Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements Surface active agents
** TC 67/SC 3 ** TC 91
Tokyo (Japan)
** TC 69 REMCO
Vienna (Austria) * Milan (Italy) Madrid (Spain) Brussels (Belgium) Madrid (Spain) Buffalo (USA) Buffalo (USA) Buffalo (USA) Orlando (USA) Brugge (Belgium)
** TC 29/SC 10 Small tools/Assembly tools for screws and nuts, pliers and nippers * * * * * * TC 37 TC 34/SC 9 TC 37/SC 2 TC 108 Terminology and other language and content resources Food products/Microbiology Terminology and other language and content resources/Terminographical and lexicographical working methods Mechanical vibration, shock and condition monitoring
TC 108/SC 3 Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock measuring instruments TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems Technical product documentation Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
** TC 10 ** TC 86/SC 6
July 2012
21 Stockholm (Sweden) ** JTC 1/SC 29 Information technology/Coding of audio, picture, multimedia and hypermedia information
August 2012
2731 Montreal (Canada) ** JTC 1/SC 35 Information technology/User interfaces
September 2012
3-7 3-7 3-8 La Rochelle (France) La Rochelle (France) Zurich (Switzerland) ** TC 163 ** TC 205 ** TC 142 * * * JTC 1/SC 36 TC 21/SC 2 TC 67 Thermal performance and energy use in the built environment Building environment design Cleaning equipment for air and other gases Information technology/Information technology for learning, education and training Equipment for fire protection and fire fighting/Manually transportable fire extinguishers Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries General Assembly Council
8-16 Busan (Korea, Republic of) 10 1920 1921 22 Milan (Italy) Rio de Janeiro (Brazil)
Rio de Janeiro (Brazil) Rio de Janeiro (Brazil) Rio de Janeiro (Brazil) Rio de Janeiro (Brazil)
** TC 164
** TC 164/SC 1 Mechanical testing of metals/Uniaxial testing ** TC 164/SC 3 Mechanical testing of metals/Hardness testing ** TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T) TAG 8 TC 54 Building Essential oils Information technology/Distributed application platforms and services (DAPS) Equipment for fire protection and fire fighting/Fire detection and alarm systems Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas Sizing systems and designations for clothes Fine ceramics Dimensional and geometrical product specifications and verification Timber Materials for the production of primary aluminium
Ottawa (Canada) * Sydney (Australia) Stockholm (Sweden) Milan (Italy) Milan (Italy) Milan (Italy) *
(Korea, Republic ** TC 133 of) Zibo city (China) ** TC 206 Cadiz (Spain) Rotorua (New Zealand) (Switzerland) ** TC 213 ** TC 218 ** TC 226
September-October 2012
30-6 Paris (France) 30-6 Chicago (USA) * TC 106 Dentistry Graphic technology
** TC 130
October 2012
1-2 5 Ottawa (Canada) * Berlin (Germany)* TC 34/SC 11 Food products/Animal and vegetable fats and oils TC 79/SC 2 TC 92 TC 199 TC 167 Light metals and their alloys/Organic and anodic oxidation coatings on aluminium Fire safety Safety of machinery Steel and aluminium structures Tractors and machinery for agriculture and forestry/Equipment for crop protection
8-12 Sapporo (Japan) * 9-10 Montreal (Canada) 1011 1017 1419 1419 *
** TC 23/SC 6 *
TC 59/SC 14 Buildings and civil engineering works/Design life TC 127 Earth-moving machinery
* * *
TC 6 TC 146
TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works TC 92/SC 1 Fire safety/Fire initiation and growth Fire safety/Fire containment Fire safety/Fire threat to people and environment
Sapporo (Japan) *
Sapporo (Japan) ** TC 92/SC 2 Sapporo (Japan) ** TC 92/SC 3 Jeju (Korea, Republic of) Sydney (Australia) Florida (USA)
TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices ** TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels ** TC 201 Surface chemical analysis
October-November 2012
29-1 Saitama (Japan) TC 34/SC 17 Food products/Management systems for food safety
November 2012
12 (Japan) Tokyo (Japan) ** TC 244 ** TC 17/SC 1 Industrial furnaces and associated processing equipment Steel/Methods of determination of chemical composition Tractors and machinery for agriculture and forestry/Equipment for harvesting and conservation Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements
** TC 118/SC 6 Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air systems
(Korea, Republic ** TC 28 of) Chicago (USA) (South Africa) Sydney (Australia) Sydney (Australia) (Europe) ** TC 68/SC 4 ** TC 102 ** TC 138
** TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage) ** TC 146/SC 6 Air quality/Indoor air
September 2012
2328
January 2013
(Unknown) ** TC 34/SC 16 Food products/Horizontal methods for molecular biomarker analysis
February-March 2013
25-1 (South America) ** JTC 1/SC 35 Information technology/User interfaces
April 2013
1011 Helsinki (Finland)** TC 117 Paris (France) ** TC 29/SC 5 Fans Small tools/Grinding wheels and abrasives Graphic technology
May 2013
1316 1317 1317 1317 2731 Chicago (USA) (Italy) (Italy) Guangzhou (China) ** TC 195 ** TC 29 ** TC 29/SC 8 * TC 68 Building construction machinery and equipment Small tools Small tools/Tools for pressing and moulding Financial services Rolling bearings Information technology/Distributed application platforms and services (DAPS) Technical product documentation
June 2013
Washington, D.C ** TC 67/SC 3 (USA) Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements
August 2013
2630 (South America) ** JTC 1/SC 35 Information technology/User interfaces