Documente Academic
Documente Profesional
Documente Cultură
1. 2 3. 4. 5.
KKS-INTRODUCTION.. ..............................3 PROJECT RELATED RULES, AGREEMENTS AND PROCEDURES.................................12 KKS EQUIPMENT UNIT KEY ..............................16 KKS COMPONENT KEY ...............................20 KKS FUNCTION KEY. ...............................25 A GRID AND DISTRIBUTION SYSTEMS.. .................................25 B POWER TRANSMISSION AND AUXILIARY POWER SUPPLY. ...........................................................32 C INSTRUMENTATION AND CONTROL EQUIPMENT.............................................................................39 E CONVENTIONAL FUEL SUPPLY AND RESIDUES DISPOSAL............................................................46 G WATER SUPPLY AND DISPOSAL...........................................................................................................48 H CONVENTIONAL HEAT GENERATION (HRSG)....................................................................................58 L STEAM-WATER CYCLE. ..........................................................................................................................61 M MAIN MACHINE SETS. .............................................................................................................................65 P COOLING WATER SYSTEMS..................................................................................................................70 Q AUXILIARY SYSTEMS. .............................................................................................................................74 S ANCILLARY SYSTEMS.............................................................................................................................79 U STRUCTURES AND BUILDINGS FOR COMBINED CYCLE POWER PLANTS. .................................86 X HEAVY MACHINERY (NOT MAIN MACHINE SETS)............................................................................100 Z WORKSHOP AND OFFICE EQUIPMENT. ............................................................................................102
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
2/102
Rev. A
1.
KKS-INTRODUCTION
(Identification System for Power Stations)
1.1.
1.2.
Requirements
In order to perform the set tasks the identification system must be capable of satisfying the following requirements: Uniform identification for all types of power stations and any connected processes Sufficient capacity and detail for identification of all systems, components and structures Sufficient capacity for extension to accommodate new technologies Consistent identification for planning, licensing, construction, operation, maintenance and waste management Interdisciplinary applicability to mechanical engineering, civil engineering, electrical and instrument & control engineering combined with ability to identify according to process functions, points of installation and locations Consideration of national and international standards, Non-language-based coding to ensure international usability, Application in computer data processing
1.3.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
04.08.2011
En
3/102
Rev. A A uniform identification structure, with a maximum of four breakdown levels, was created for all three types; the units referred to becoming smaller from left to right.
3 Component Pump
PI
1.3.1.
Table 1 summarizes the identification and type of data characters of the breakdown levels for all three different types of identification appearing in the KKS.
0
Total Plant G (A) or (N)
1
Function F0 F1 F2 F3 FN (N) A A A NN
2
Equipment Unit A1 A2 AN A A NNN
3
component A3 (A) B1 B2 A A BN NN
A = Alphabetical symbols (letters, special symbols) N = Numerical symbols (digits) ( ) = These data characters may be omitted
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
4/102
Rev. A 1.3.2. Process-Related Identification In this type of identification the entire system is subdivided according to the function or process, since, whether for mechanical, electrical, control or civil engineering, the equipment units and components must be identifiable in relation to the process. The process-related identification is for many applications the most important identification, since it permits, for example, locations of electrical and controls equipment, rooms, signals, and the identification in circuit diagrams related to particular functions. In the electrical and instrumentation control engineering sectors, the equipment for auxiliary services, power supply, open-loop-control, instrumentation, protection, etc., is treated as a process engineering function. The same applies to structures in civil engineering work. The process-related identification corresponds to the identification block "Plant" in DIN 40719, part 2. This block has the prefix sign "=". According to the standard, the prefix sign can be omitted provided that the identification remains unambiguous. 1.3.3. Point of Installation Identification As with the Process-Related Identification, the KKS is also used to identify locations, principally of electrical and instrumentation and control equipment, but also of mechanical equipment. Locations -for example, coordinates, racks and positions in cubicles etc. - are identified in the breakdown level EQUIPMENT UNIT. The identification letters now used for the Point of installation identification in the breakdown level FUNCTION are the same as those for the process-related identification. This improves recognition of the identification in the overall system. In order to prevent possible confusion between Process-Related Identification and Point of Installation Identification the prefix sign + must be added to the Point of Installation Code (according to DIN 40719, part 2). Resp. the breakdown symbols "full stop" between breakdown Level 1 and 2 must be added. This prefix sign is omitted when there is absolutely no ambiguity - for example, in layout documents. 1.3.4. Location identification In order to clearly identify the position of plant, sub-systems and equipment in the power station, the building structure and floor is entered at the breakdown level FUNCTION, and the rooms on the various floors of the building structure at the breakdown level EQUIPMENT UNIT. The breakdown level COMPONENT is omitted in such cases. Fire protection sections are identified according to the room identification.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
5/102
Process-related Code
Total plant System code Mechanical engineering Civil engineering Unit Unit Unit Control and instrumentation (for mechanical and civil engineering) System Structure, floor Structure, floor Equipment unit code Pump unit Rolling door Fan unit Component code (Pump) (Motor) (Fan)
System Structure, floor System Unit coordinate level Switchgear Transformer Transformer Transformer Elect. Equipment cab. Structure, floor
Measuring circuit Measuring circuit Open-loop-control Closed-loop-control Switchgear assembly Fan unit Measuring circuit Terminal box Measuring circuit Junction box
Transducer Temp. sensor Push-button Controller Fuse Motor Indicator Terminal block Smoke detector Telephone jack
Point of Installation
Total plant Installation unit code Electrical and control and instrumentation engineering Unit Unit Unit Switchgear Elect. Equipment cab. Control console Installation space code Tier/Space Tier/Space Coordinate
Location code
Total plant Civil engineering Unit Unit Structure-code Structure, floor Outdoor area Room-code Room/coordinates Coordinates
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
6/102
Rev. A
1.4.
1.4.1.
The KKS is divided into different BREAKDOWN LEVELS and codes from left to right in diminishing order of the units of a complete power plant: 0 Total Plant G A or N F0 N 1 Function F1F2F3 AAA Fn N N 2 Equipment Unit A1A2 AA An NNN A3 A 3 Component B1B2 AA Bn N N
Overall plant prefix No. (Chapter 2.1) Function level prefix No. (Chapter 2.1) Function code (Chapter 5) Equipment unit code (Chapter 3) Component code (Chapter 4) Systems and sub-systems limit descriptions in the breakdown level Function are part of the function code list. Where they are not defined, the beginning of a new system is at branch-off or outlet of other system or at a point where unequivocal allocation of a component to a system is possible. Legend for the limits:
from incl. from excl. to excl. to incl.
"from incl." means "including" the mentioned component "from excl." means "excluding" the mentioned component "to excl." means "excluding" the mentioned component "to incl." means "including" the mentioned component
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
7/102
F1 F1/F2 F1/F2/F3
Identification
GRID AND DISTRIBUTION SYSTEMS POWER TRANSMISSION AND AUXILIARY POWER SUPPLY INSTRUMENTATION AND CONTROL EQUIPMENT (Identification on a priority basis according to main, instrumentation and control function also acceptable in composite structure hardware packaging systems.)
E G H L M P Q S T U Z
CONVENTIONAL FUEL SUPPLY AND RESIDUES DISPOSAL WATER SUPPLY AND DISPOSAL CONVENTIONAL HEAT GENERATION STEAM, WATER, GAS CYCLES MAIN MACHINE SETS COOLING WATER SYSTEMS AUXILIARY SYSTEMS ANCILLARY SYSTEMS - blocked STRUCTURES WORKSHOP AND OFFICE EQUIPMENT
For complete function code list including system limits of function groups F1F2 and function subgroups F1F2F3 see Function code key (chapter 5).
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
8/102
Rev. A
A1 A1A2
Identification
MECHANICAL EQUIPMENT MECHANICAL EQUIPMENT DIRECT MEASURING CIRCUITS CLOSED-LOOP-CONTROL CIRCUITS ANALOG AND BINARY SIGNAL CONDITIONING INDIRECT MEASURING CIRCUITS ELECTRICAL EQUIPMENT SUB-ASSEMBLIES OF MAIN AND HEAVY MACHINERY
For complete Equipment Units of sub-groups A1A2 see Equipment Unit code Key (chapter 3) 1.4.3. Breakdown level Component Component identification:
Serial No. of breakdown level Name of the breakdown level Identification of data character Type of data character 3 Component B 1B 2 AA Bn NN
B1 B1B2
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
9/102
Rev. A For complete Components of the sub-groups B1B2 see Component Code Key (chapter 4). In P&I diagrams breakdown level 3 is NOT used. In other documents it may be used according to separate agreements. Overview
Serial No. of breakdown level Name of breakdown level 0 Total Plant Identification of data character Type of data character = G A or N F0 (N) F1F2F3 AAA Fn NN A 1A 2 AA 1 Function 2 Equipment Unit An NNN A3 (A) 3 Component B 1B 2 AA Bn NN
Identification of power station units and non-unit specific plants Prefix No. of the function code Counting of similar systems and plants System-classifying Classifying sub-division of systems and plants of a unit System-counting Counting sub-division of systems and plants into system sections and sub-systems Equipment-classifying Classifying sub-division of mechanical equipment, open loop-control Equipment-counting Counting of similar mechanical equipment, electrical and control & instrumentation equipment Additional identification of breakdown level 2 Identification of pilot valves, multiple drives/ el. loads, measuring points with multiple output/operating points Component-classifying Classifying sub-division of components, signals or signal-applications Component-counting Counting of components or signals or signal-applications
The data character marked ( ) and the prefix sign can be omitted if the identification remains unequivocal.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
10/102
Rev. A
1.5.
In P&I diagrams the following symbols to indicate KKS code and limit functions and piping sections are recommended
The symbol "pin with empty head" is used to identify the limits of functions and sub-functions The symbol "pin with full head" is used to identify the limits of piping sections
DN600
DN800
Reducers are assigned to the piping with the larger diameter. They need not be shown on P&ID`s. (See KKS Application Commentaries Part B1, page 52)
NNAAANN AANNN
The symbol "flag" is used for the identification of pipings, The direction of the flag shows the direction of the medium flow.
NNAAANN AANNN
The extended "flag" symbol is used for the identification of a pipe where medium flow direction alters according to the operating conditions
NNAAANN
The symbol "I & C - circuits" (DIN 19227, sheet 1) is used to represent measuring circuits. KKS-code for measuring circuits
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
11/102
Rev. A
2.
2.1.
2.2.
2.2.1.
Agreement on breakdown level "G" and prefix number for system code "F0" numbering.
G and F0 for process related and point of installation identification (example). Total plant "G" 3 3 3 4 4 4 9 System code prefix No. "F0" 1 8 9 1 8 9 9 Contents
Unit1,Gas Turbine1, HRSG1, El. Generator1 and all related systems Unit1,Steam Turbine, Steam Water Cycle and all related systems Unit1- Related common equipment Unit2,Gas Turbine1, HRSG1, El. Generator1 and all related systems Unit2,Steam Turbine, Steam Water Cycle and all related systems Unit2- Related common equipment Non-unit specific plants and systems*)
2.2.2.
G and F0 for location identification (example). Total plant "G" 3 3 4 4 9 Z System code prefix No. "F0" 0 1-9 0 1-9 0, 1 - 9 0, 1 - 9 Contents
Structure appears only once in unit 1 Counting more than one structures with the same structure code (F1, F2, F3) in unit 1 Structure appears only once in unit 2 Counting more than one structures with the same structure code (F1, F2, F3) in unit 2 Non-unit specific structures*) Temporary structures
*) Also plants, systems, structures and equipment considered to occur only once when extension to 2 or more units takes place.
2.3.
Originator
AMA/00/M/-------PMF/NA/252
04.08.2011
En
12/102
Rev. A
An application-specific scheme of numbering may be established. However, it has to be valid throughout all project disciplines in order of an unequivocal understanding of the code. Management systems (e.g. computer checking programs, allocation sheets) have to assure, that no double KKS numbers occur in the project and that no multiple KKS numbers are assigned to one item. If necessary, subdivisions of number ranges in FN and AN according to the division of work could be made. They have to be written down directly in the Function key code and must be respected by the partners.
2.4.
2.5.
2.6.
2.7.
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
13/102
Rev. A
For other engineering activities (e.g. component engineering), KKS code must always be taken from the above mentioned basic documents. In basic KKS documents (P&IDs, single line diagrams and site layouts) the breakdown level 3 (component code) is never used. The detailed KKS coding in process-related identification has to be made according to the KKS-Application Commentaries, Part B1, B3 and B4 by VGB Kraftwerkstechnik GmbH.
2.8.
*) Main media / system = in F1, F2, F3 (FN) identified system with its media; e.g. LAB(95) = High pressure feedwater piping system Note: Special rules on point of installation identification and location identification have to be established within the relevant engineering disciplines (electrical, I&C and civil engineering) according to the KKS-Application Commentaries, Part B2, B3 and B4 by VGB Kraftwerkstechnik GmbH. The KKS basic documents for these types of KKS code have to be identified as well.
2.9.
Comments
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
14/102
Rev. A
LBA51 LBC30 LCQ21 LCQ41 LCQ61 LCQ80 till 82 QFH50 till 69 QEH50 till 69 GHA50 till 69
HP Steam Cold reheat LP Blow down IP Blow down HP Blow down Blow down Instrument air Service air Service water
2.10.
2.10.1.
Responsibilities
KKS Project Guidelines & Keys Responsible for publishing, updating and for co-ordination of KKS identification between project partners (external and internal): Name: Shahroz Ali Khan Email: shahroz.ali-khan@power.alstom.com
2.10.2.
Responsibility for KKS Identification of Systems and Equipment Units Engineering teams responsible for development of basic KKS documents (see chapter 2.1) are the creators of the KKS identification and, therefore, responsible for a correct detailed identification according to this document. They should allocate KKS numbers only in the number range they have been allowed (see chapter 5 - KKS Function code, column <<Workflow>>).
2.11.
Explanation of abbreviations
In chapter 5 KKS Function Key following abbreviations are used in the column <<Rev>>: A means Revision A (B,C etc) A# means Revision A Text deleted A@ means Revision A Text inserted new. In chapter 5 KKS Function Key following abbreviations are used in the column <<Workflow>>: ARR_PL Arrangement planning WSC Steam water cycle (SWC) WSC_Supl Subsuppliers SWC (HRSG, TWP) BOP Balance of Plant systems (BOP) BOP_Supl Subsuppliers of BOP CIVIL Civil engineering constructions (concrete, steel a.s.o.) BLDG_FAC Ancillary systems (HVAC, Fire extinguishing a.s.o.) EL Electrical engineering IC Instrumentation & Control GT_A_SYS Gas Turbine Gas Turbine Auxiliary System GT_CMBST Gas Turbine Combuster GT_T_BLK Gas Turbine Thermal Block GEN El. Generator Plant ST Steam Turbine Plant NOTDEFINED More than one system owner
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
15/102
Rev. A
3.
3.1.
3.2.
B Mechanical equipment
BA BB BC BD BE BF BG BH BJ BK BL BM BN BP BQ BR BS BT BU BV BW BX BY BZ -blockedStorage equipment (tanks) -blocked-blockedShafts (for erection and maintenance only) Foundations -blocked-blocked-blocked-blocked-blocked-blockedJet pumps, ejectors, injectors Flow restrictors, limiters, orifices (not metering orifices) Hangers, supports, racks, piping penetrations Piping, ductwork, chutes, compensators Silencers Flue gas catalytic converter modules Insulation, sheathing -blocked-blocked-blocked-blocked-blockedIdentification number Rev. Date Lang. Sheet
Originator
AMA/00/M/-------PMF/NA/252
04.08.2011
En
16/102
Rev. A
3.3.
3.4.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
17/102
Rev. A
3.5.
3.6.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
18/102
Rev. A
3.7.
G Electrical equipment
GA Junction boxes and cable/bus bar penetrations (free for use) GB Junction boxes and cable/bus bar penetrations (free for use) GC Junction boxes and cable/bus bar penetrations (free for use) GD Junction boxes and cable/bus bar penetrations (free for use) GE Junction boxes and cable/bus bar penetrations (free for use) GF Junction boxes and cable/bus bar penetrations (free for use) GG Junction boxes and cable/bus bar penetrations (free for use) GH Electrical and instrumentation and control installation units identified as per process system (e.g. cubicles, boxes) GJ -blockedGK Information display and operator control equipment for process computers and automation systems GL -blockedGM Junction boxes for light-current systems of national telecommunication services GN -blockedGP Subdistribution/junction boxes for lighting GQ Subdistribution/junction boxes for power sockets GR DC generating equipment, batteries GS Switchgear equipment if not identified under process equipment GT Transformer equipment GU Converter equipment GV Structure-related earthing and lightning protection equipment, surge arrestors GW Cabinet power supply equipment GX Actuating equipment for electrical variables GY Junction boxes for light-current systems (not of national telecommunication services) GZ Hangers, supports and racks for electrical and instrumentation and control equipment
3.8.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
19/102
Rev. A
4.
4.1.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
20/102
Rev. A
4.2. 4.3. 4.4. 4.5. 4.6. 4.7. 4.8. 4.9. 4.10. 4.11.
A -blockedB -blockedC -blockedD -blockedE -blockedF -blockedG -blockedH -blockedJ -blockedK Mechanical components
KA KB KC KD KE KF KG KH KJ KK KL KM KN KP KQ KR KS KT KU KV KW KX KY KZ Gate valves, globe valves, dampers, cocks, rupture disks, orifices Gates, doors, dam boards Heat exchangers, coolers Vessels/tanks, pools, surge tanks (fluid systems) Turning, driving, lifting and slewing gear Continuous conveyors, feeders -blocked-blockedSize reduction machines Compacting, packaging machines -blockedMixers, agitators Compressors, blowers, fans Pumps -blocked-blocked-blockedCleaning machines, dryers, separators, filters -blockedBurners, grates Stationary tooling and treatment machines for maintenance -blocked-blocked-blocked-
4.12. 4.13.
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
21/102
Rev. A
MC MD ME MF MG MH MJ MK ML MM MN MP MQ MR MS MT MU MV MW MX MY MZ
-blocked-blocked-blockedFoundations Gearboxes -blocked-blockedClutches, couplings -blockedEngines, not electrical -blocked-blocked-blockedPiping components, ductwork components Positioners, not electrical Turbines Transmission gear, non electrical, converters and boosters other than couplings and gearboxes -blocked-blocked-blocked-blocked-blocked-
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
22/102
Rev. A
4.24.
Y Signal applications
(Subgroups are established as appropriate to the type of instrumentation and control system and are therefore subject to agreement between the parties to the project.) YA Signal applications (free for use) YB Signal applications (free for use) YC Signal applications (free for use) YD Signal applications (free for use) YE Signal applications (free for use) YF Signal applications (free for use) YG Signal applications (free for use) YH Signal applications (free for use)
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
23/102
Rev. A
YJ YK YL YM YN YP YQ YR YS YT YU YV YW YX YY YZ
Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use) Signal applications (free for use)
4.25.
Z Gated signals
(Subgroups are established as appropriate to the type of instrumentation and control system and are therefore subject to agreement between the parties to the project.) ZA Gated signals (free for use) ZB Gated signals (free for use) ZC Gated signals (free for use) ZD Gated signals (free for use) ZE Gated signals (free for use) ZF Gated signals (free for use) ZG Gated signals (free for use) ZH Gated signals (free for use) ZJ Gated signals (free for use) ZK Gated signals (free for use) ZL Gated signals (free for use) ZM Gated signals (free for use) ZN Gated signals (free for use) ZP Gated signals (free for use) ZQ Gated signals (free for use) ZR Gated signals (free for use) ZS Gated signals (free for use) ZT Gated signals (free for use) ZU Gated signals (free for use) ZV Gated signals (free for use) ZW Gated signals (free for use) ZX Gated signals (free for use) ZY Gated signals (free for use) ZZ Gated signals (free for use)
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
24/102
Rev. A
5.
Key
A
AD ADA ADB ADC ADD ADM ADN ADZ AK AKA AKB AKC AKD AKM AKN AKZ AL ALA ALB ALC ALD
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
04.08.2011
En
25/102
Rev. A
Description 6 - 9 kV systems (busbar section). 6 - 9 kV systems (busbar section). 6 - 9 kV systems (Line/transformer feeder). < 1 kV system Low voltage switchgear 500-1000 V, Three-phase/single phase alternating current. (free for use). Low voltage switchgear 500-1000 V, Three-phase/single phase alternating current. (free for use). Low voltage switchgear 500-1000 V, Three-phase/single phase alternating current. (free for use). < 1 kV system (free for use). Low voltage switchgear < 500 V, Three-phase/single phase alternating current. (free for use). Low voltage switchgear < 500 V, Three-phase/single phase alternating current. (free for use). Low voltage switchgear < 500 V, Three-phase/single phase alternating current. (free for use). Low voltage switchgear < 500 V, Three-phase/single phase alternating current. (free for use). Direct current switchgear 220/125 V. (free for use). Direct current switchgear 220/125 V. (free for use). Direct current switchgear 220/125 V. (free for use). Direct current switchgear 220/125 V. (free for use). Direct current switchgear 60/48 V. (free for use). Direct current switchgear 60/48 V. (free for use). Direct current switchgear 60/48 V. (free for use). Direct current switchgear 24/12 V. (free for use). Direct current switchgear 24/12 V. (free for use). Direct current switchgear 24/12 V. (free for use). < 1 kV systems (line).
Identification number Rev. Date Lang. Sheet
ANB
ANC
AND ANE
ANF
ANG
ANH
ANK ANL ANM ANN ANQ ANR ANS ANU ANV ANW ANZ
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
26/102
Rev. A
Key AP APA APB APC APD AQ AQA AQB AQC AQD AQZ AR ARA ARB ARC ARD ARZ AS ASA ASB ASC ASD ASJ ASL ASM ASN
Originator
Description Control consoles. Control consoles. (free for use). Control consoles. (free for use). Control consoles. (free for use). Control consoles. (free for use). Measuring and metering equipment. Measuring and metering equipment. (free for use). Measuring and metering equipment. (free for use). Measuring and metering equipment. (free for use). Measuring and metering equipment. (free for use). Measuring and metering equipment. (Line) Protection equipment. Protection equipment. (free for use). Protection equipment. (free for use). Protection equipment. (free for use). Protection equipment. (free for use). Protection equipment (line). Decentralized panels and cabinets. Circuit breaker appurtenances. Multiplication, conversion, decoupling. Transducer appurtenances. Compressed air, hydraulics. Automated controls, closed-loop control. Grid simulation, voltage group selection. Measuring equipment. Auxiliary power supply.
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
27/102
Rev. A
Key ASP ASQ ASR ASS AST ASU ASV ASW ASX AT ATA ATB ATC ATD ATZ AU AUA AUA AUB AUC AUD AUE AUF AUG AUH AV
Originator
Description Recording. Metering. Protection. Synchronization. Transformation. Panels and cabinets for auxiliary equipment. Group, intermediate and general terminal blocks. Indication, manual operation, monitoring. Alarm annunciation. Transformer equipment. Transformer equipment. (free for use). Transformer equipment. (free for use). Transformer equipment. (free for use). Transformer equipment. (free for use). Transformer equipment. (free for use). Open-loop control, checkback and auxiliary equipment Open-loop control, checkback and auxiliary equipment. (free for use) Open-loop control, checkback and auxiliary equipment. (free for use). Open-loop control, checkback and auxiliary equipment. (free for use). Open-loop control, checkback and auxiliary equipment. (free for use). Open-loop control, checkback and auxiliary equipment. (free for use). Open-loop control, checkback and auxiliary equipment. (free for use). Open-loop control, checkback and auxiliary equipment. (free for use). Open-loop control, checkback and auxiliary equipment. (free for use). Open-loop control, checkback and auxiliary equipment. (free for use). Marshalling racks.
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
28/102
Rev. A
Key AVA AVB AVC AVD AVE AVF AVG AVH AW AWA AWB AWC AWD AX AXA AXB AXC AXD AXE AXF AXG AXH AXJ AXK AXL AXM
Originator
Description Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Instrument panels. Instrument panels. (free for use). Instrument panels. (free for use). Instrument panels. (free for use). Instrument panels. (free for use). Central equipment. Battery chargers. Battery plant. Uninterruptible power supply system (UPS). Low voltage distribution. Compressed air generation system. Central equipment. (free for use). Central equipment. (free for use). Central equipment. (free for use). Central equipment. (free for use). Central equipment. (free for use). Central equipment. (free for use). Central equipment. (free for use).
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
29/102
Rev. A
Key AXN AXP AXR AXS AXT AXU AXV AXW AXX AXY AXZ AY AYA AYB AYC AYD AYE AYF AYG AYH AYJ AYK AYL AYM AYN AYP
Originator
Description Central equipment. (free for use). Central equipment. (free for use). Central equipment. (free for use). Central equipment. (free for use). Auxiliary power transformer. Central equipment. (free for use). Central equipment. (free for use). Central equipment. (free for use). Central equipment. (free for use). Central equipment. (free for use). Central equipment. (free for use). Communication equipment. Telephone system (PABX). Control console telephone system. Alarm system (acoustic). Alarm system (optical). Fire alarm system. Clock system. Remote control system. Telemetry system. Remote metering system. HF carrier telephone system. Staff paging system, wireless. Staff paging system, inductive. Staff paging system, hardwired. Optical monitoring system.
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
30/102
Rev. A
Description General gas alarm system (if not assigned to specific system). Radiotelephone system.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
31/102
Rev. A
Key
Description
B
BA BAA
BAB BAC BAT BAU BAW BAX BAY BB BBA BBB BBC BBD BBE BBF BBG BBH BBT BBX BBY BF
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
32/102
Rev. A
Key BFA BFB BFC BFD BFE BFF BFG BFH BFT BH BHA BHB BHC BHD BHE BHF BHG BHH BHR
Description Low voltage main distribution boards, normal system. (free for use). Low voltage main distribution boards, normal system. (free for use). Low voltage main distribution boards, normal system (ACC). Low voltage main distribution boards, normal system. (free for use). Low voltage main distribution boards, normal system. (free for use). Low voltage main distribution boards, normal system (option e.g. for heating & freezing protection). Low voltage main distribution boards, normal system. (free for use). Low voltage main distribution boards, normal system. (free for use). Low voltage auxiliary power transformer. Low voltage main distribution boards and transformers, general-purpose. Low voltage main distribution boards, general purpose. (free for use). Low voltage main distribution boards, general purpose. (free for use). Low voltage main distribution boards, general purpose. (free for use). Low voltage main distribution boards, general purpose. (free for use). Low voltage main distribution boards, general purpose. (free for use). Low voltage main distribution boards, general purpose. (free for use). Low voltage main distribution boards, general purpose. (free for use). Low voltage main distribution boards, general purpose. (free for use). Low voltage auxiliary distribution boards, general-purpose. NORMAL. Lighting, ventilation, air conditioning. Low voltage auxiliary power transformers. (free for use according to voltage level). Low voltage auxiliary power transformers. (free for use according to voltage level). Low voltage auxiliary power transformers. (free for use according to voltage level). Low voltage auxiliary power transformers. (free for use according to voltage level). Fluid supply system for control and protection equipment. Control and protection equipment.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
33/102
Rev. A
Key BJ BJA
Description Low voltage subdistribution boards and transformers, normal system. Low voltage subdistribution boards and transformers, normal system. (free for use). Low voltage subdistribution boards and transformers, normal system. (free for use). Low voltage subdistribution boards and transformers, normal system. (free for use). Low voltage subdistribution boards, normal system. Low voltage subdistribution boards, normal system. Low voltage subdistribution boards, normal system. Water treatment. Low voltage subdistribution boards, normal system. Fluid supply system for control and protection equipment. Control and protection equipment. Low voltage subdistribution boards and transformers, general-purpose. Low voltage subdistribution boards, general-purpose. (free for use). Low voltage subdistribution boards, general-purpose. (free for use). Low voltage subdistribution boards, general-purpose. (free for use). Low voltage subdistribution boards, general-purpose. (free for use). Low voltage subdistribution boards, general-purpose. (free for use). Low voltage subdistribution boards, general-purpose. (free for use). Low voltage subdistribution boards, general-purpose. (free for use). Low voltage subdistribution boards, general-purpose. (free for use). Low voltage auxiliary power transformer. Fluid supply system for control and protection equipment. Control and protection equipment. Low voltage distribution boards and transformers, (diesel) emergency power system 1. Low voltage emergency distribution boards. (free for use).
BJB
BJC
BJD BJE BJH BJT BJX BJY BL BLA BLB BLC BLD BLE BLF BLG BLH BLT BLX BLY BM BMA
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
34/102
Rev. A
Key BMB BMC BMD BME BMF BMG BMH BMR BMT BMU BMV BMW BMX BMY BP
Description Low voltage emergency distribution boards. (free for use). Low voltage emergency distribution boards. (free for use). Low voltage emergency distribution boards. (free for use). Low voltage emergency distribution boards. (free for use). Low voltage emergency distribution boards. (free for use). Low voltage emergency distribution boards. (free for use). Low voltage emergency distribution boards. (free for use). Low voltage auxiliary distribution boards, general-purpose. ESSENTIAL.Lighting, ventilation, air conditioning. Low voltage auxiliary power transformers. (free for use according to voltage level). Low voltage auxiliary power transformers. (free for use according to voltage level). Low voltage auxiliary power transformers. (free for use according to voltage level). Low voltage auxiliary power transformers. (free for use according to voltage level). Fluid supply system for control and protection equipment. Control and protection equipment. Power installations for large variable-speed drives (e.g.for feedwater pump,excitation equipment, gt starting equipment, not power adjusters in switchgear) (e.g. for feedwater pump, excitation equipment, not power adjusters in switchgear). Power installations for large variable-speed drives. (free for use). Power installations for large variable-speed drives. (free for use). Power installations for large variable-speed drives. (free for use). Power installations for large variable-speed drives. (free for use). Transformer for large variable-speed drives (free for use). Fluid supply system for control and protection equipment. Control and protection equipment. Low voltage distribution boards, converter, uninterruptible power system (UPS) and stand-by diesel power system Low voltage (UPS) distribution boards (free for use).
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
35/102
Rev. A
Key BRB BRC BRD BRE BRF BRG BRH BRR BRT BRU BRV BRX BRY BT BTA BTB BTC BTD BTE BTF BTL BTM BTN BTP BTQ BTR
Originator
Description Low voltage (UPS) distribution boards (free for use). Low voltage emergency distribution boards. (free for use). Low voltage emergency distribution boards. (free for use). Low voltage (UPS) distribution boards (free for use). Low voltage emergency distribution boards. (free for use). Low voltage emergency distribution boards. (free for use). Low voltage emergency distribution boards. (free for use). Low voltage (UPS) distribution boards. SAFETY. (free for use). Converter (rotary). Converter (static), inverter. Stand-by power generation equipment Fluid supply system for control and protection equipment. Control and protection equipment. Battery and charger systems Batteries 125 V or 220 V DC. Batteries 125 V or 220 V DC. Batteries. Batteries. Batteries 24 V DC. Batteries 24 V DC. Battery chargers 125 V or 220 V DC. Battery chargers 125 V or 220 V DC. Battery chargers. Battery chargers. Battery chargers 24V DC. Battery chargers 24 V DC.
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
36/102
Rev. A
Key BTS BTT BTW BTX BTY BTZ BU BUA BUB BUC BUD BUE BUF BUG BUH BUL BUM BUX BV BVA BVB BVC BVD BVE BVF BVG
Originator
Description DC/DC converter 125 or 220/48 V DC. DC/DC converter 125 or 220/48 V DC. Common equipment. Common equipment. Common equipment. Common equipment. Direct current distribution boards (free for use). Direct current distribution boards 125 V or 220 V (free for use). Direct current distribution boards 125 V or 220 V (free for use). Direct current distribution boards 125 V or 220 V (free for use). Direct current distribution boards (free for use). Direct current distribution boards 24 V (free for use). Direct current distribution boards 24 V (free for use). Direct current distribution boards 24 V (free for use). Direct current distribution boards (free for use). Direct current distribution boards 48 V (free for use). Direct current distribution boards 48 V (free for use). Fluid supply system for control and protection equipment. Direct current distribution boards Direct current distribution boards 125 V or 220 V (free for use). Direct current distribution boards 125 V or 220 V (free for use). Direct current distribution boards 125 V or 220 V (free for use). Direct current distribution boards (free for use). Direct current distribution boards 24 V (free for use). Direct current distribution boards 24 V (free for use). Direct current distribution boards 24 V (free for use).
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
37/102
Rev. A
Key BVH BVL BVM BVX BVY BY BYA BYB BYC BYD
Description Direct current distribution boards (free for use). Direct current distribution boards 48 V . (free for use). Direct current distribution boards 48 V . (free for use). Fluid supply system for control and protection equipment. Control and protection equipment. Control and protection equipment. Control and protection equipment. (free for use). Control and protection equipment. (free for use). Control and protection equipment. (free for use). Control and protection equipment. (free for use).
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
38/102
Rev. A
Key
Description
CA CAA CAB CAC CAD CB CBA CBP CBQ CC CCA CCB CCC CCD CD CDA CDB CDC CDD CE CEA CEB
Protective interlocks. Cabinets for protective interlocks. (free for use). Cabinets for protective interlocks. Cabinets for protective interlocks. Cabinets for protective interlocks. Functional group control, subloop control Cabinets for DCS cubicles. (free for use). Cabinets for synchronization. (free for use). Cabinets for auxiliary power changeover (free for use). Binary signal conditioning. Cabinets for binary signal conditioning. (free for use). Cabinets for binary signal conditioning. (free for use). Cabinets for binary signal conditioning. (free for use). Cabinets for binary signal conditioning. (free for use). Drive control interface. Cabinets for drive control interface. (free for use). Cabinets for drive control interface. (free for use). Cabinets for drive control interface. (free for use). Cabinets for drive control interface. (free for use). Annunciation. Cabinets for annunciation systems. (free for use). Cabinets for annunciation systems. (free for use).
Identification number Rev. Date Lang. Sheet
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
39/102
Rev. A
Key CEC CED CEK CF CFA CFB CFC CFD CFQ CG CGA CGB CGC CGD CH CHA CHB CHC CHD CHE CHF CJ CJA CJD CJF CJJ
Originator
Description Cabinets for annunciation systems. (free for use). Cabinets for annunciation systems. (free for use). Fault recording. Measurement, recording. Cabinets for measurement. (free for use). Cabinets for measurement. (free for use). Cabinets for measurement. (free for use). Cabinets for measurement. (free for use). Cabinets for recording (meters, pen recorders). Closed-loop control (excl. power section). Cabinets for closed-loop control. (free for use). Cabinets for closed-loop control. (free for use). Cabinets for closed-loop control. (free for use). Cabinets for closed-loop control. (free for use). Protection (excl. reactor protection). Cabinets for generator and transformer protection (free for use). Cabinets for generator and transformer protection (free for use). Cabinets for generator and transformer protection (free for use). Cabinets for generator and transformer protection (free for use). Protection (excl. reactor protection). (free for use). Protection (excl. reactor protection). (free for use). Unit coordination level. Unit control system (including cabinets). Start-up control, setpoint control (unit) (incl. cabinets). Boiler control system (incl. cabinets). Instrumentation and control cabinets for steam turbine set. (free for use).
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
40/102
Rev. A
Description Instrumentation and control cabinets for steam turbine set. (free for use). Instrumentation and control cabinets for gas turbine set. Instrumentation and control cabinets for gas turbine set. (free for use). Instrumentation and control cabinets for other main and heavy machinery. (free for use). Process computer system. Online supervisory and diagnostic computer. (free for use). Online supervisory and diagnostic computer. (free for use). Online supervisory and diagnostic computer. (free for use). Online supervisory and diagnostic computer. (free for use). Online supervisory and diagnostic computer. (free for use). Access control computer. (free for use). Access control computer. (free for use). Access control computer.(free for use). Access control computer. (free for use). Process computer system. (free for use). Instrumentation and control equipment. Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination).
CK CKA CKB CKC CKD CKE CKJ CKK CKL CKM CKN CM CMA CMB CMC CMD CN CNA CNB CNC CND
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
41/102
Rev. A
Key CNT CP CPA CPB CPC CPD CQ CQA CQB CQC CQD CR CRA CRB CRC CRD CS CSA CSB CSC CSD CT CTB CU CUA CUB
Originator
Description Instrumentation and control equipment (network cubicles). Instrumentation and control equipment. Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Instrumentation and control equipment. (free for use for system combination). Auxiliary cabinets and combinated cabinets. Generator, complete, incl. stator, rotor and all integral cooling equipment. Closed-loop control (power section). Static excitation system or generator voltage regulator. (free for use). Closed-loop control (power section).
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
42/102
Rev. A
Key CUC CUG CV CVA CVB CVC CVD CVE CVF CVG CVH CVP CW CWA CWB CWC CWD CWE CWF CWG CWH CWJ CWP CWQ CWS CWT
Originator
Description Closed-loop control (power section). Closed-loop control (power section). Marshalling racks. Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Marshalling racks. (free for use). Control rooms. Main control consoles. (free for use). Main control consoles. (free for use). Main control consoles. (free for use). Main control consoles. (free for use). Main control consoles. (free for use). Main control consoles. (free for use). Main control consoles. (free for use). Main control consoles. (free for use). Main control consoles. (free for use). Main control consoles. (free for use). Control rooms. (free for use). Control rooms. (free for use). Control rooms. (free for use).
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
43/102
Rev. A
Key CWU CX
Description Control rooms.(free for use). Local control stations (e.g. for coal handling plants, ash handling plants, cooling watersystems, diesel units, supervision of generator cooling, remote shutdown station). Local control stations. (free for use). Local control stations. (free for use). Local control stations. (free for use). Local control stations. (free for use). Local control stations. (free for use). Local control stations. (free for use). Local control stations. (free for use). Local control stations. (free for use). Local control stations. (free for use). Communication equipment. Telephone system (PABX). Control console telephone system. Alarm system (acoustic). Alarm system (optical). Fire alarm system. Fire Control Unit FCU (BMA). Clock system. CYF00 Time system. CYF50-90 Personal access system. Remote control system. Telemetry system. CYH80 Plant emission monitoring system, CYH90 Weather station. Remote metering system. HF carrier telephone system. Staff paging system, wireless. Local area network (LAN).
CXA CXB CXC CXD CXE CXF CXG CXH CXQ CY CYA CYB CYC CYD CYE CYF
CYG CYH
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
44/102
Rev. A
Description Staff paging system, hardwired. (e.g.Loudspeaker) Optical monitoring system. General gas alarm system (if not assignet to a specific system). Pneumatic tube conveyor. Radiotelephone system.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
45/102
Rev. A
Key
Description
E
EK EKA
EKB
EKC
EKD
EKE
EKF
EKG
EKH
EKR
EKT
EKU
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
46/102
Rev. A
Key EKY EL ELA ELB ELC ELD ELV ELW ELX ELY EY EYA EYB EYC EYD
Description Control and protection equipment. Chemical treatment of gaseous fuels incl. residues removal. Chemical treatment of gaseous fuels incl. residues removal. (free for use). Chemical treatment of gaseous fuels incl. residues removal. (free for use). Chemical treatment of gaseous fuels incl. residues removal. (free for use). Chemical treatment of gaseous fuels incl. residues removal. (free for use). Lubricant supply system. Sealing fluid supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Control and protection equipment. Control and protection equipment. (free for use). Control and protection equipment. (free for use). Control and protection equipment. (free for use). Control and protection equipment. (free for use).
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
47/102
Rev. A
Key
Description
G
GA GAA
GAC
GAD
GAF
GBB
GBC
GBE
GBK
GBL
GBN
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
48/102
Rev. A
Key
GBQ
GBR
GBS
GBT
Injection system for main fluid (for hardness stablisation). from incl. injection equipment from excl. branch off chemicals supply system to excl. inlet to other system. Flushing water and residues removal system incl. neutralization. from excl. outlet of respective system to excl. discharge into disposal system. Sludge thickening system. from excl. outlet of respective system to excl. discharge into other system. Heating, cooling and flushing fluid distribution system. from incl. heating, cooling, flushing fluid generation equipment or from excl. branch off heating, cooling, flushing fluid supply system to excl. user and from excl. user. Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Treatment system (demineralization). Filtering, mechanical cleaning system. from incl. separation equipment inlet to incl. separation equipment outlet. Aeration, gas injection system. from excl. atmosphere or from incl. gas supply. Acid proportioning system (e.g. for carbonate hardness removal). from incl. acid proportioning equipment or from excl. branch off chemicals supply system to excl. inlet to other system. Ion exchange, reverse osmosis system (e.g. for demineralization). from incl. ion exchanger inlet from incl. isolating valve of chemicals supply system or auxiliary fluid supply system upstream of ion exchanger. Deaeration system. from incl. deaerator or tank inlet to incl. tank outlet incl. warm-up equipment of vapour condenser. Preheating, cooling system. from incl. preheater or cooler inlet to incl. preheater or cooler outlet. Piping system, temporary storage system, pump system for main fluid. Piping system: from excl. intake or from excl. outlet of other system to excl. inlet to other system
Identification number Rev. Date Lang. Sheet
GCC
GCE
GCF
GCH
GCJ
GCK
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
49/102
Rev. A
Key
Description to incl. fluid treatment system outlet. Temporary storage system: from incl. temporary storage system inlet to incl. temporary storage system outlet. Pump System: from incl. pump system suction nozzle to incl. pump system discharge nozzle. Storage system outside fluid treatment system (if not part of another system). from incl. inlet storage system to incl. outlet storage system incl. intake and outfall. Chemicals supply system. from incl. intake or from incl. storage tank to excl. discharge into other system. Regeneration, flushing equipment. from incl. system inlet to excl. inlet to other system from excl. chemicals or auxiliary fluid supply system and flushing air supply system to incl. regenerating, flushing equipment. Injection system for main fluid. from incl. injection equipment or from excl. branch off chemicals supply system to excl. inlet to other system. Flushing water and residues removal system incl. neutralization. from excl. outlet of respective system to excl. discharge into disposal system. Sludge thickening system. from excl. outlet of respective system to excl. discharge into other system. Heating, cooling and flushing fluid distribution system. from incl. heating, cooling and flushing fluid generation equipment or from excl. branch off heating, cooling, flushing fluid supply system to excl. user and from excl. user. Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Distribution systems (not drinking water). Distribution systems (not drinking water). (free for use for other kinds of water). Distribution systems after treatment (demineralization). to excl. inlet into other system. Distribution systems after treatment (others). to excl. inlet into other system. Distribution systems for fuel supply purposes. (free for use for other kinds of water).
Identification number Rev. Date Lang. Sheet
GCL
GCN
GCP
GCQ
GCR
GCS
GCT
AMA/00/M/-------PMF/NA/252
14.09.2011
En
50/102
Rev. A
Description Distribution systems for "G" group systems. (free for use for other kinds of water). Distribution systems for "H" group systems. (free for use for other kinds of water). Distribution systems for "L" group systems. (free for use for other kinds of water). Distribution systems for main machines sets, "M" group systems. (free for use for other kinds of water). Distribution systems for "N" group systems. (free for use for other kinds of water). Distribution systems for "P" group systems. (free for use for other kinds of water). Distribution systems for "Q" group systems. (free for use for other kinds of water). Distribution systems for "S" group systems. (free for use for other kinds of water). Drinking water supply. Receiving point. Storage, forwarding, distribution system. Drinking water supply in structures for switchgear. Drinking water -Treatment. 10-19 Chlorination 20-29 Ozone treatment 30-39 Ion exchange Drinking water supply in structures for conventional fuel supply and residue disposal. Drinking water supply in structures for water supply and waste water disposal. Drinking water supply in structures for conventional heat generation. Drinking water supply in structures for steam water cycle. Drinking water supply in structures for main machine sets. Drinking water supply in structures for process energy supply systems. Drinking water supply in structures for circulation (cooling) water systems. Drinking water supply in structures for circulatig (cooling) water systems (e.g. circulating water pumps and outfall). Drinking water supply in structures for ancillary systems. Drinking water supply for auxiliary systems. Drinking water supply in general service structures: transport, traffic, fencing, gardens and other purposes.
GKE GKG GKH GKL GKM GKN GKP GKQ GKS GKT GKU
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
51/102
Rev. A
Key GKX GKY GM GMA GMB GMC GMD GME GMG GMH GML GMM GMN GMP GMQ GMS GMT GMU GMX GMY GN GNB
Description Fluid supply system for control and protection equipment. Control and protection equipment. Process drainage system. Central process drainage system. -(free for use)-. Process drainage system in structures for switch gear. -(free for use)-. Process drainage system in structures for conventional fuel supply and residue disposal. Process drainage system in structures for water supply and discharge. Process drainage system in structures for conventional heat generation. Process drainage system in structures for steam water cycle. Process drainage system in structures for main machine sets. Process drainage system in structures for process energie supply. Process drainage system in structures for circulating (cooling) water systems. Process drainage system in structures for circulatig (cooling) water systems (e.g. circulating water pumps and outfall). Process drainage system in structures for ancillary systems. Process drainage system in structures for auxiliary systems. Process drainage system in general service structures: transport, traffic, fencing, gardens and other purposes. Fluid supply system for control and protection equipment. Control and protection equipment. Process drains treatment system. Filtering mechanical cleaning system. from incl. separation equipment inlet to incl. separation equipment outlet. Aeration, gas injection system. from excl. atmosphere or from incl. gas supply. Precipitation system (e.g. for carbonate hardness removal). from incl. precipitation equipment inlet to incl. precipitation equipment outlet.
GNC
GND
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
52/102
Rev. A
Key GNE
Description Acid proportioning system (e.g. for carbonate hardness removal). from incl. acid proportioning equipment or from excl. branch off chemicals supply system to excl. inlet to other system. Ion exchange, reverse osmosis system (e.g. for demineralization). from incl. ion exchanger inlet from incl. isolating valve of chemicals supply system or auxiliary fluid supply system upstream of ion exchanger. Evaporation system (e.g. for demineralization). from incl. feedwater inlet to incl. steam outlet and from incl. heating steam inlet to incl. condensate outlet. Deaeration system. from incl. deaerator or tank inlet to incl. tank outlet incl. warm-up equipment of vapour condenser. Preheating, cooling system. from incl. preheater or cooler inlet to incl. preheater or cooler outlet. Piping system, temporary storage system, pump system for main fluid. Piping system: from excl. intake or from excl. outlet of other system to excl. inlet to other system to incl. fluid treatment system outlet. Temporary storage system: from incl. temporary storage system inlet to incl. temporary storage system outlet. Pump System: from incl. pump system suction nozzle to incl. pump system discharge nozzle. Storage system outside fluid treatment system (if not part of another system). from incl. inlet storage system to incl. outlet storage system incl. intake and outfall. Chemicals supply system. from incl. intake or from incl. storage tank to excl. discharge into other system. Regeneration, flushing equipment. from incl. system inlet to excl. inlet to other system from excl. chemicals or auxiliary fluid supply system and flushing air supply system to incl. regenerating, flushing equipment. Injection system for main fluid. from incl. injection equipment or from excl. branch off chemicals supply system to excl. inlet to other system.
GNF
GNG
GNH
GNJ
GNK
GNL
GNN
GNP
GNQ
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
53/102
Rev. A
Key GNR
Description Flushing water and residues removal system incl. neutralization. from excl. outlet of respective system to excl. discharge into disposal system. Sludge thickening system. from excl. outlet of respective system to excl. discharge into other system. Heating, cooling and flushing fluid distribution system. from incl. heating, cooling and flushing fluid generation equipment or from excl. branch off heating, cooling, flushing fluid supply system to excl. user and from excl. user. Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Domestic waste water collection and drainage systems. Central domestic waste water collection and drainage systems. Domestic waste water collection and drainage systems in structures for switch gear. Domestic waste water collection and drainage systems in structures for conventional fuel supply. Domestic waste water collection and drainage systems in structures for water supply and waste water disposal. Domestic waste water collection and drainage systems in structures for conventional heat generation. Domestic waste water collection and drainage systems in structures for steam water cycle. Domestic waste water collection and drainage systems in structures for main machine sets. Domestic waste water collection and drainage systems in structures for process energy supply. Domestic waste water collection and drainage systems in structures for circulating (cooling). Domestic waste water collection and drainage systems in structures for circulating (cooling) water systems (e.g. circulating water pumps and outfall). Domestic waste water collection and drainage systems in structures for ancillary systems. Domestic waste water collection and drainage systems in structures for auxiliary systems. Domestic waste water collection and drainage systems in general service structures: transport, traffic, fencing, gardens and other purposes. Fluid supply system for control and protection equipment. Control and protection equipment.
Identification number Rev. Date Lang. Sheet
GNS
GNT
GNV GNX GNY GQ GQA GQC GQE GQG GQH GQL GQM GQN GQP GQQ
GQX GQY
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
54/102
Rev. A
Key GR GRB
Description Domestic waste water treatment system. Filtering, mechanical cleaning system. from incl. separation equipment inlet to incl. separation equipment outlet. Aeration, gas injection system.from excl. atmosphere or from incl. gas supply. Precipitation system (e.g. for carbonate hardness removal). from incl. precipitation equipment inlet to incl. precipitation equipment outlet. Acid proportioning system (e.g. for carbonate hardness removal). from incl. acid proportioning equipment or from excl. branch off chemicals supply system to excl. inlet to other system. Deaeration system. from incl. deaerator or tank inlet to incl. tank outlet incl. warm-up equipment of vapour condenser. Preheating, cooling system. from incl. preheater or cooler inlet to incl. preheater or cooler outlet. Piping system, temporary storage system, pump system for main fluid. Piping system: from excl. intake or from excl. outlet of other system to excl. inlet to other system to incl. fluid treatment system outlet. Temporary storage system: from incl. temporary storage system inlet to incl. temporary storage system outlet. Pump System: from incl. pump system suction nozzle to incl. pump system discharge nozzle. Storage system outside fluid treatment system (if not part of another system). from incl. inlet storage system to incl. outlet storage system incl. intake and outfall. Chemicals supply system. from incl. intake or from incl. storage tank to excl. discharge into other system. Regeneration, flushing equipment. from incl. system inlet to excl. inlet to other system from excl. chemicals or auxiliary fluid supply system and flushing air supply system to incl. regenerating, flushing equipment. Injection system for main fluid. from incl. injection equipment or from excl. branch off chemicals supply system to excl. inlet to other system. Flushing water and residues removal system incl. neutralization. from excl. outlet of respective system
Identification number Rev. Date Lang. Sheet
GRC GRD
GRE
GRH
GRJ
GRK
GRL
GRN
GRP
GRQ
GRR
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
55/102
Rev. A
Key
GRS
GRT
Sludge thickening system. from excl. outlet of respective system to excl. discharge into other system. Heating, cooling and flushing fluid distribution system. from incl. heating, cooling and flushing fluid generation equipment or from excl. branch off heating, cooling, flushing fluid supply system to excl. user and from excl. user. Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Rainwater collection and drainage systems incl. treatment system. Central rainwater collection and drainage system. Central rainwater treatment system. Rainwater collection and drainage systems incl. treatment system in structures for switchgear. Rainwater collection and drainage systems incl. treatment system in structures for conventional fuel supply and residue disposal. Rainwater collection and drainage systems incl. treatment system in structures for water supply and waste water disposal. Rainwater collection and drainage systems incl. treatment system in structures for conventional heat generation. Rainwater collection and drainage systems incl. treatment system in structures for steam water cycle. Rainwater collection and drainage systems incl. treatment system in structures for main machine sets. Rainwater collection and drainage systems incl. treatment system in structures for process energy supply. Rainwater collection and drainage systems incl. treatment system in structures for circulation. Rainwater collection and drainage systems incl. treatment system in structures for circulating (cooling) water systems (e.g. circulating water pumps and outfall). Rainwater collection and drainage systems incl. treatment system in structures for ancillary systems. Rainwater collection and drainage systems incl. treatment system in general service structures: transport, traffic, fencing, gardens and other purposes. Fluid supply system for control and protection equipment. Control and protection equipment. Control and protection equipment.
Identification number Rev. Date Lang. Sheet
GUG
GUS GUU
GUX GUY GY
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
56/102
Rev. A
Description Control and protection equipment. (free for use). Control and protection equipment. (free for use). Control and protection equipment. (free for use). Control and protection equipment. (free for use).
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
57/102
Rev. A
Key
Description
H
HA HAC
HAD
HAG
HAH
HAJ
HAN
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
58/102
Rev. A
Description Enclosures, insulations. Platforms, stairways. Steam generator interior. from excl. inlet duct to excl. flue gas exhaust. Flue gas exhaust (without flue gas treatment). Ducting system. from excl. boiler outlet or from excl. outlet of other system to excl. smoke stack, excl. air heater, flue gas dust handling system, induced-draught fan system, gas scrubber system, chemical flue gas treatment system. Smoke stack system (chimney). from incl. inlet. Lubricant supply system. Sealing fluid supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Lubricant supply system. Lubricant supply system. Lubricant supply system. (free for use). Lubricant supply system. (free for use). Lubricant supply system. (free for use). Fluid supply system for control and protection equipment. Fluid supply system for control and protection equipment. (free for use). Fluid supply system for control and protection equipment. (free for use). Fluid supply system for control and protection equipment. (free for use). Fluid supply system for control and protection equipment. (free for use). Fluid supply system for control and protection equipment. (free for use). Control and protection equipment. Control and protection equipment. (free for use). Control and protection equipment. (free for use).
Identification number Rev. Date Lang. Sheet
HN HNA
HNE HNV HNW HNX HNY HV HVA HVB HVC HVD HX HXA HXB HXC HXD HXV HY HYA HYB
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
59/102
Rev. A
Description Control and protection equipment. (free for use). Control and protection equipment. (free for use). Control and protection equipment. Dummies for El. consumer No.91-99 eg. HYS91 GH001.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
60/102
Rev. A
Key
Description
L
LA LAA
STEAM-WATER CYCLE.
Feedwater system. Storage, deaeration (incl. feedwater tank). from incl. deaerator or tank inlet to incl. tank outlet incl. warm-up equipment and vapour condenser. LAA50,60 FWT heating. Feedwater piping system (excl. feedwater pump and feedwater heating system). from excl. feedwater tank outlet to excl. boiler inlet header or heat exchanger. LAB46&96 reserved for HRSG. Low pressure: LAB01 - 19 Intermediate pressure: LAB20 - 49 High pressure: LAB50 - 99. Feedwater pump system. from incl. pump system suction nozzles to incl. pump system discharge nozzles. Low pressure: LAC01 - 19 Intermediate pressure: LAC20 - 49 High pressure: LAC50 - 99. HP desuperheating spray system. from excl. branch off feedwater piping system to excl. user. LAE50 reserved for HRSG. IP desuperheating spray system. from excl. pump system discharge nozzle or from excl. branch off other system to excl. user. LAF40 reserved for HRSG. Lubricant supply system. Sealing fluid supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Steam system. Main steam piping system. from excl. boiler outlet or from excl. heat exchanger to excl. turbine main stop valve or HP reducing station or turbine bypass or other user (system). LBA11,30,41,51 reserved for HRSG Low pressure: LBA01 - 19 Intermediate pressure: LBA20 - 49 High pressure: LBA50 - 99. Hot reheat piping system. from excl. reheater steam outlet limit of supply to excl. intercept valve or turbine inlet or turbine bypass (MAN),
Identification number Rev. Date Lang. Sheet
LAB
LAC
LAE
LAF
LBB
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
61/102
Rev. A
Key
Description or other user (system). Low pressure: LBA01 - 19 Intermediate pressure: LBA20 - 49 High pressure: LBA50 - 99. Cold reheat piping system. from excl. turbine outlet or high pressure reducing station to excl. reheater inlet excl. moisture separator or user (system). LBC30 reserved for HRSG. Overpressure limitation and safety equipment incl. water injection and pressure meassuring device (HP reducing station). from excl. branch off *LAE* / *LAF*, *LBA* to excl. inlet to *LBC*. Auxiliary steam piping system. from excl. receiving point from other system to excl. user (system). e.g. LBG40- antiicing, NOx; LBG50 foging. Start-up steam system, shutdown steam system. from excl. boiler outlet or from excl. branch off main steam line,incl. start-up condenser or from excl. outlet of other system to excl. inlet to other systems. Low pressure: LBH01 - 19 Intermediate pressure: LBH20 - 49 High pressure: LBH50 - 99. Extraction steam piping system for main condensate heating. from excl. turbine outlet or branch off other system to excl. LP feedwater heating system or deaerator or user (system). Common dump line. eg. Blow-out. Lubricant supply system. Sealing fluid supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Condensate system. Main condensate piping system (excl. main condensate pump system, LP feedwater heating system, condensate polishing plant). from excl. condenser outlet to excl. deaerator inlet or to excl. feedwater pump system (in plants without feedwater tank). Main condensate pump system. from incl. pump system suction nozzle to incl. pump system discharge nozzle. Main condensate heating system. from incl. heater inlet to incl. heater outlet incl.desuperheater and cooler.
Identification number Rev. Date Lang. Sheet
LBC
LBF
LBG
LBH
LBS
LCB
LCC
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
62/102
Rev. A
Key LCE
Description Condensate desuperheating spray system. from excl. branch off main condensate piping system or from excl. branch off auxiliary steam turbine condensate piping system to excl. user. LP heater drains system. from excl. heater outlet to excl. inlet to other systems. Steam generator drain system. from excl. branch off pressure system or from incl. start-up flash tank to excl. inlet to other systems. Clean drains system (collecting and return system). from incl. collecting tank or from excl. final drain valve or from excl. inlet from other collecting system to excl. inlet to other systems. Auxiliary steam condensate system (collecting and return system). from excl. (steam) user to excl. inlet to other systems. Standby condensate system, incl. storage and pump system. from excl. branch off other system to excl. inlet to other systems. Steam generator blowdown system. from excl. steam generator outlet from incl. blowdown flash tank (caustic flash tank) to excl. inlet to other systems. LCQ21,41,61, 80,81,82 reserved for HRSG. Standby condensate distribution system. from excl. branch off other system to excl. inletto other systems. Lubricant supply system. Sealing and cooling condensate system. from excl. branch off other system to excl. user, incl. recirculation. Fluid supply system for control and protection equipment. Control and protection equipment. Dummies for El. consumer No.91-99 eg.LCY91 GH001. Common installations for steam-water cycle. Steam generator layup system. Proportioning system for feedwater, condensate system, incl. proportioning in boiler and turbine area. e.g. LFN01-phosphate/hydraz., LFN20-ammonia, LFN40oxygen/scaveng. Control and protection equipment. Control and protection equipment. (free for use). Control and protection equipment. (free for use).
Identification number Rev. Date Lang. Sheet
LCJ
LCL
LCM
LCN
LCP
LCQ
LCR
LCV LCW
LY LYA LYB
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
63/102
Rev. A
Description Control and protection equipment. (free for use). Control and protection equipment. (free for use). Control and protection equipment. (free for use).
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
64/102
Rev. A
Key
Description
M
MA MAA
MAB
MAC
MAD MAG
MAJ
MAK MAL
MAN
MAV
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
65/102
Rev. A
Key MAW
Description Sealing, heating and cooling steam system. from excl. branch to excl. casing nozzle of seal steam user and leak-off to excl. condenser or to incl. gland steam condenser or to excl. heating/cooling steam user. Non-electric control and protection equipment, incl. fluid supply system. Electrical control and protection equipment. Gas turbine plant. Turbine, compressor rotor with common casing.from incl. compressor inlet to incl. compressor outlet from incl. turbine inletto incl. turbine outlet, incl. exhaust gas diffuser. MBA30 BQ Holding devices (Holding plate) MBA30 HA Casing parts MBA30 HB Rotor parts MBA80 HA Casing parts MBA30 HB Rotor parts. Turbine casing and rotor. from incl. turbine inlet to incl. turbine outlet, incl. exhaust gas diffuser. Compressor casing and rotor. from incl. compressor inlet to incl. compressor outlet. Bearings. Cooling mediun system. from excl. branch-off cooling medium supply Cooling and sealing gas system. from incl. extraction point to excl. user and from excl. user, incl. leak-off to incl. inlet to other system Start-up unit. Transmission gear between prime mover and driven machine, incl. turning gear, barring gear. MBK10 HA Gear casing parts. Intake air, cold gas system (open cycle). from excl. atmosphere to excl. combustion chamber or to excl. compressor inlet or to incl. exhaust gas heat exchanger, excl. compressor. MBL70 - 99 Antiicing & air prewarming system. Combustion chamber (gas heating, combustion). from incl. cold gas, fuel inlet to incl. hot gas outlet. MBM30 Combustion chamber, MBM30 HA Combustion chamber casing parts MBM31 Burner. Fuel supply system (liquid). from excl. branch off main supply line or from incl. temporary (day) tank to excl. combustion chamber or to excl. motive gas generating unit, incl. fuel return system. MBN32 BF Fuel supply pump foundation.
Identification number Rev. Date Lang. Sheet
MBB
MBJ MBK
MBL
MBM
MBN
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
66/102
Rev. A
Key MBP
Description Fuel supply system (gaseous). from excl. branch off main supply line to excl. combustion chamber or to excl. motive gas generating unit. Ignition fuel supply system (if separate). from excl. branch off main supply line or from incl. storage tank to excl. combustion chamber or to excl. motive gas generating unit. Exhaust gas system (open cycle). from excl. combustion chamber or from excl. exhaust gas diffuser to excl. discharge into atmosphere, excl. turbine or to excl. inlet to other system (e.g. combustion air system). Additive system. from incl. Supply to incl. injection. MBU70 - 79 Gas turbine air cooling system. Lubricant supply system. from incl. dedicated lubricant tank or common lubricant and control fluid tank or from excl. branch off control fluid supply system to excl. user and from excl. user. Sealing oil supply system. from incl. dedicated seal oil tank or from excl. seal oil pump suction line to excl. user and from excl. user. Non-electric control and protection equipment, incl. fluid supply system. Electrical control and protection equipment. Lubricant and control fluid treatment system. Generator plant. Generator, complete, incl. stator, rotor and all integral cooling equipment. to incl. generator bushing. Generator exciter set, including set with electrical braking system. (use only if *MKC* is not sufficient for identification). Exciter set. Bearings. Stator/rotor liquid cooling system, incl. coolant supply system (Note: for cooling oil see *MKU*). Task: dissipate heat produced by stator/rotor to coolant from excl. stator/rotor outlet to excl. stator/rotor inlet. Stator/rotor gas cooling system. incl. coolant supply system (Note: for nitrogen cooling see *MKH*).
Identification number Rev. Date Lang. Sheet
MBQ
MBR
MBU
MBV
MBW
MKB
MKG
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
67/102
Rev. A
Key
Description Task: dissipate heat produced by stator/rotor to coolant from excl. stator/rotor outlet to excl. stator/rotor inlet. Secondary cooling water system. from excl. cooling water system (*PC*, *PG*) to excl. users incl. blowdown, discharge, venting from excl. users to excl. inlet into other system. Exhaust gas system (if separate from *MKG* and *MKH*). Stator/rotor cooling oil cooling system, incl. coolant supply system (Note: for other liquid cooling see *MKF*). Task: dissipate heat produced by stator/rotor to coolant from excl. stator/rotor outlet to excl. stator/rotor inlet. Lubricant supply system (if separate system for generator). Sealing fluid supply system (Sealing oil system incl. supply and treatment). from excl. branch off sealing oil supply system to excl. stator inlet and from excl. stator outlet to excl. inlet to other system or in closed systems from excl. stator outlet to excl. stator inlet. Fluid supply system for control and protection equipment. Control and protection equipment. Common installations for main machine sets. Foundation. Sheathing. Frame, support structure. Forced cooling system. Lubricant supply system. Lubricant supply system. (free for use). Lubricant supply system. (free for use). Control and protection equipment. Control and protection equipment. (free for use). Control and protection equipment. (free for use). Control and protection equipment. (free for use).
Identification number Rev. Date Lang. Sheet
MKP
MKQ MKU
MKV MKW
MKX MKY MP MPA MPB MPG MPR MV MVC MVD MY MYA MYB MYC
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
68/102
Rev. A
Key MYD
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
69/102
Rev. A
Key
Description
P
PA PAA
PAB
PAC
PAD
PAE PAH
PAR
PAS
PBQ
PBV
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
70/102
Rev. A
Description Fluid supply system for control and protection equipment. Control and protection equipment. Service (secondary cooling) water system, conventional area. Extraction, mechanical cleaning for direct cooling. from incl. intake system to incl. mechanical cleaning system outlet. Piping and culvert system. from excl. outlet of service (secondary cooling) extraction system or from excl. branch off circulating water system to excl. inlet to other system, excl. respective user and from excl. make-up water treatment and distribution system. Pump system. from incl. pump system suction nozzle to incl. pump system discharge nozzle. Recirculation cooling system, outfall cooling system. from incl. hot water riser to incl. basin outlet. Heat exchanger cleaning system. Attention! The number range N50 - N99 in breakdown level An (Equipment unit) is reserved. Service (secondary cooling) water system for generator, motor generator cooling. from excl. branch off *PCB* to excl. generator cooler and from excl. generator cooler to excl. inlet to *PCB* or other systems. Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Closed cooling water system. Closed cooling water piping system (forward). from excl. discharge nozzle of closed cooling water pump system to excl. user, incl. blowdown, discharge, venting to excl. inlet into other system excl. intercooler (see *PGD*). Closed cooling water piping system (return). from excl. outlet user to excl. closed cooling water pump system suction nozzles incl. blowdown, discharge, venting to excl. inlet to other system. Closed cooling water pump system. from incl. pump system suction nozzles to incl. pump system discharge nozzles incl. discharge, flushing, venting to excl. inlet into other system.
Identification number Rev. Date Lang. Sheet
PCB
PCC
PCD
PCH
PCM
PGB
PGC
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
71/102
Rev. A
Key PGD
Description Intercooler. from incl. intercooler inlet nozzle to incl. intercooler discharge nozzle, incl. discharge, venting to excl. inlet to other system incl. safety valves with their blow-off lines to excl. inlet to other system (secondary cooling water side safety valves only when fitted directly to the cooler, otherwise on system *PCB*). Pressure system. from excl. branch of piping system forward (*PGA*) from incl. first shut-off valve of control station in make-up water supply to excl. inlet to piping system return (*PGB*) incl. head tank with associated eguipment incl. control station in make-up watersupply incl. discharge, venting to excl. inlet to other system. Closed cooling water system for main groups *E* and *H*. Closed cooling water system for main groups *G*, *L* and *P*. Closed cooling water system for main groups *B*, *M*, and *X*. Closed cooling water system for main group *N*. Closed cooling water system for main groups "Q" and "S". Fluid supply system for control and protection equipment. Control and protection equipment. Cooling tower blowdown system (if separate from *PAB*). Cooling tower blowdown system. (free for use). Cooling tower blowdown system. (free for use). Common equipment for cooling water systems. Defrosting equipment. Fish barrier. Boat barrier. Debris filter equipment. Attention! The number range N50 - N99 in breakdown level 2 (Equipment unit) is reserved. Cooling water biocide treatment. Proportioning equipment. Lubricant supply system.
Identification number Rev. Date Lang. Sheet
PGF
PGH PGL PGM PGN PGQ PGX PGY PS PSA PSB PU PUC PUD PUE PUG
PUK PUN PV
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
72/102
Rev. A
Key PVA PVB PVC PVD PX PXA PXB PXC PXD PY PYA PYB PYC PYD
Description Lubricant supply system. (free for use). Lubricant supply system. (free for use). Lubricant supply system. (free for use). Lubricant supply system. (free for use). Fluid supply system for control and protection equipment. Fluid supply system for control and protection equipment. (free for use). Fluid supply system for control and protection equipment. (free for use). Fluid supply system for control and protection equipment. (free for use). Fluid supply system for control and protection equipment. (free for use). Control and protection equipment. Control and protection equipment. (free for use). Control and protection equipment. (free for use). Control and protection equipment. (free for use). Control and protection equipment. (free for use).
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
73/102
Rev. A
Key
Description
Q
QC QCA QCB QCC QCD QCE QCF QCG QCH QCJ QCK QCV QCX QCY QE QEA QEB QEE QEG QEH
AUXILIARY SYSTEMS.
Central chemicals supply. Common filling equipment for liquid chemical products. Common filling equipment for solid chemical products. Hydrazine supply and distribution. Phosphate supply and distribution. Ammonia supply and distribution. Iron-sulphate supply and distribution. Sodium-nitrite supply and distribution. Sulphuric acid supply and distribution. Ammonia storage and feed for HRSG catalytic converter *HSJ*. Hypochlorite generation, supply and distribution. Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. General compressed air and carrier air supply. Central compressed air and carrier air generation system. Central compressed air and carrier air distribution system. Compressed air and carrier air supply system for main group *E*. Compressed air and carrier air supply system for main group *G*. Compressed air and carrier air supply system for main group *H*. QEH50-69 reserved for HRSG. Compressed air and carrier air supply system for main group *L*. Compressed air and carrier air supply system for main groups *B*, "X" and *M*. Central compressed air and carrier air supply for main group *N*. Compressed air and carrier air supply system for main group *P*.
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
74/102
Rev. A
Key QEQ QES QEV QEW QEX QEY QF QFA QFB QFE QFF QFG QFH QFL QFM QFN QFP QFQ QFS QFV QFW QFX QFY QH QHA QHB
Originator
Description Compressed air and carrier air supply system for main groups *Q*. Compressed air and carrier air supply system for main group *S*. Lubricant supply system. Sealing fluid supply system. Fluid supply system for control and protection equipment. Control and protection equipment. General control air supply. Central control air generation system. Central control air distribution system. Control air supply system for main group *E*. Control air treatment system. Control air supply system for main group *G*. Control air supply system for main group *H*. QEH50-69 reserved for HRSG. Control air supply system for main groups *L*. Control air supply system for main groups *B*, *M* and *X*. General control air supply for main group *N*. Control air supply system for main group *P*. Control air supply system for main group *Q*. Control air supply system for main group *S*. Lubricant supply system. Sealing fluid supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Auxiliary steam generating system. Pressure system. Support structure, enclosure, steam generator interior.
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
75/102
Rev. A
Key QHC QHD QHE QHF QHG QHH QHJ QHL QHM QHN QHP QHQ QHR QHS QHT QHU QHV QHX QHY QJ QJB QJD QJE QJF QJH QJK
Originator
Description Fireside heat transfer surface cleaning equipment. Ash and slag removal. Blowdown system, flash drain system. Bunker, feeder and pulverizing system. Boiler water circulation system (also for electrode steam boiler). Main firing system (also for electric heating). Ignition firing equipment (if separate). Combustion air system (primary air, secondary air). Gas heating system (for closed cycle). Flue gas exhaust (without flue gas treatment). Mechanical dust handling system. Electrostatic precipitator. Chemical flue gas treatment system incl. residues removal adsorptive process. Chemical flue gas treatment system incl. residues removal catalytic process. Chemical flue gas treatment system incl. residues removal absorptive process. Flue gas reheating system. Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Central gas supply, also inert gas. Gas supply and distribution system O2 (oxygen). Gas supply and distribution system N2 (nitrogen). QJD70-79 reserved for HRSG. Gas generation system N2 (nitrogen). Gas supply and distribution system H2 (hydrogen). Gas supply and distribution system CH4 (methane). Gas supply and distribution system CO2 (carbon dioxide).
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
76/102
Rev. A
Key QJM QJP QJV QJW QJX QJY QK QKA QKB QKC QKD QKE QKF QKG QKH QLJ QKK QKL QKM QKN QKP QKQ QKR QKS QKT QKU
Originator
Description Gas supply and distribution system C2H2 (acetylene). Gas supply and distribution system C3H8 (propane gas). Lubricant supply system. Sealing fluid supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Chilled water systems for conventional area Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific). Chilled water systems for conventional area. (free for use e.g. building specific).
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
77/102
Rev. A
Key QKV QKX QKY QL QLA QLB QLC QLD QLF QLV QLX QLY QU QUE QUH QUL QUN QUP QUQ QUS QUX QUY
Description Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Feedwater, steam, condensate cycle of auxiliary steam generating and distribution system. Feedwater system. Steam system. Condensate system. Condensate polishing plant. Common equipment for auxiliary steam generation and distribution systems. Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Sampling systems for conventional area. Sampling systems for main group *E*. Sampling systems for main group *H* (gas-side). Sampling systems for main group *H* (steam-water-side), *L* and *M*. Sampling system for main group *N*. Sampling systems for main groups *G* and *P*. Sampling systems for main group *Q*. Sampling systems for main group *S*. Fluid supply system for control and protection equipment. Control and protection equipment.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
78/102
Rev. A
Key
Description
S
SA SAA SAB SAC SAD SAE SAG SAH SAK SAL SAM SAN SAP SAQ SAS SAU SAV SAX SAY SB SBA SBC SBE SBG
ANCILLARY SYSTEMS.
Heating, ventilation, air-conditioning (HVAC) systems for conventional area. Refrigeration plant (if not part of *QK*). Air humidifying systems (if not part of *QM*). Heating, ventilation, air-conditioning (HVAC) systems in structures for switch-gear. Heating. ventilation. air-conditioning (HVAC) systems in structures for electro modules Heating, ventilation, air-conditioning (HVAC) systems in structures for conventional fuel supply and residue disposal. Heating, ventilation, air-conditioning (HVAC) systems in structures for water supply and waste water disposal. Heating, ventilation, air-conditioning (HVAC) systems in structures for conventional heat generation. Heating, ventilation, air-conditioning (HVAC) systems for general service structures. Heating, ventilation, air-conditioning (HVAC) systems in structures for steam- water cycle. Heating. ventilation. air-conditioning (HVAC) systems in structures for main machine sets Heating. ventilation. air-conditioning (HVAC) systems in structures for process energy supply. Heating, ventilation, air-conditioning (HVAC) systems in structures for circulating (cooling) water systems. Heating, ventilation, air-conditioning (HVAC) systems in structures for auxiliary systems. Heating, ventilation, air-conditioning (HVAC) systems in structures for ancillary systems. Heating, ventilation, air-conditioning (HVAC) systems in general service structures. Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Space heating systems. Central heating station. Space heating systems in structures for switch-gear. Space heating systems in structures for conventional fuel supply and residue disposal. Space heating systems in structues for water supply and waste water disposal.
Identification number Rev. Date Lang. Sheet
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
79/102
Rev. A
Key SBH SBL SBM SBN SBP SBQ SBS SBU SBX SBY SC SCA SCB SCC SCD SCE SCF SCG SCH SCJ SCK SCL SCM SCN SCP
Description Space heating systems in structures for conventional heat generation. Space heating systems in structures for steam-water cycle. Space heating systems in structures for main machine sets. Space heating system in structures for process energy supply systems. Space heating systems in structures for circulating (cooling) water systems. Space heating systems in structures for auxiliary systems. Space heating systems in structures for ancillary systems. Space heating systems in general service structures. Fluid supply system for control and protection equipment. Control and protection equipment. Stationary compressed air supplies. Compressed air generation system. Compressed air distribution system. Stationary compressed air supplies. (free for use). Stationary compressed air supplies. (free for use). Stationary compressed air supplies. (free for use). Stationary compressed air supplies. (free for use). Stationary compressed air supplies. (free for use). Stationary compressed air supplies. (free for use). Stationary compressed air supplies. (free for use). Stationary compressed air supplies. (free for use). Stationary compressed air supplies. (free for use). Stationary compressed air supplies. (free for use). Stationary compressed air supplies. (free for use). Stationary compressed air supplies in structures for circulating (cooling) water systems (e.g. circulating water intake).
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
80/102
Rev. A
Key SCQ
Description Stationary compressed air supplies in structures for circulating (cooling) water systems (e.g. circulating water pumps and outfall). Stationary compressed air supplies. (free for use). Stationary compressed air supplies in structures for ancillary systems. Stationary compressed air supplies for auxiliary systems. (free for use). Stationary compressed air supplies: transport, traffic, fencing, gardens and other purposes. Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Cleaning system (see *FK* for decontamination systems). Cleaning system (see *FK* for decontamination systems). Cleaning system (see *FK* for decontamination systems). Cleaning system (see *FK* for decontamination systems). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use).
SCR SCS SCT SCU SCV SCX SCY SD SDA SDB SDC SDD SDE SDF SDG SDH SDJ SDK SDL SDM SDN SDP SDQ SDR
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
81/102
Rev. A
Key SDS SDT SDU SDV SDX SDY SF SFA SFB SFC SFD SFE SFF SFG SFH SFJ SFK SFL SFM SFN SFP SFQ SFR SFS SFT SFU
Originator
Description Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Cleaning system (see *FK* for decontamination systems). (free for use). Lubricant supply system. (free for use). Fluid supply system for control and protection equipment. (free for use). Control and protection equipment. (free for use). Heating and fuel gas systems. Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use). Heating and fuel gas systems. (free for use).
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
82/102
Rev. A
Key SFY SG SGA SGC SGE SGF SGG SGJ SGK SGL SGV SGX SGY SM SMA SMC SME
Description Control and Protection equipment. Stationary fire protection systems. Fire water system, conventional area. Spray deluge systems, conventional area. Sprinkler systems. Foam fire-fighting systems. Tank roof, tank shell cooling systems. CO2 fire-fighting systems (e.g. NFPA 12). Clean agent fire-fighting systems (e.g. NFPA 2001). Powder/aerosol fire-fighting systems (e.g. NFPA 2010). Lubricant supply system. Fluid supply system for control and protection equipment. Control and protection equipment. Cranes, stationary hoists and conveying appliances. Central equipment. Cranes, stationary hoists and conveying appliances in structures for switch-gear. Cranes, stationary hoists and conveying appliances in structures for conventional fuel supply and residues discharge. Cranes, stationary hoists and conveying appliances in structures for flue gas chemical treatment. Cranes, stationary hoists and conveying appliances in structures for water supply and waste water disposal. Cranes, stationary hoists and conveying appliances in structures for conventional heat generation. Cranes, stationary hoists and conveying appliances in structures for steam-water cycle. Cranes, stationary hoists and conveying appliances in structures for main machine sets. Cranes, stationary hoists and conveying appliances in structures for process energy supply for external users. Cranes, stationary hoists and conveying appliances in structures for circulating (cooling) water systems. Cranes, stationary hoists and conveying appliances in structures for auxiliary systems.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
83/102
Rev. A
Key SMS SMU SMX SMY SN SNC SNE SNG SNH SNL SNM SNN SNP SNQ SNS SNT SNU SNY SP SPA SPB SPC SPD SQ SQA SQB
Originator
Description Cranes, stationary hoists and conveying appliances in structures for ancillary systems. Cranes, stationary hoists and conveying appliances in general service structures. Fluid supply system for control and protection equipment. Control and protection equipment. Elevators. Elevators in structures for switch-gear Elevators in structures for conventional fuel supply and residue disposal. Elevators in structures for water supply and waste water disposal. Elevators in structures for conventional heat generation. Elevators in structures for steam-water cycle. Elevators in structures for main machine sets. Elevators in structures for process energy supply for external users. Elevators in structures for circulating (cooling) water systems (e.g. circulating water intake) Elevators in structures for circulating (cooling) water systems (e.g. circulating water outfall) Elevators in structures for ancillary systems Elevators in structures for auxiliary systems Elevators in general service structures. Control and protection equipment. Railway installations. Railway installations. (free for use). Railway installations. (free for use). Railway installations. (free for use). Railway installations. (free for use). Road installations. Road installations. (free for use). Road installations. (free for use).
Identification number Rev. Date Lang. Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
84/102
Rev. A
Key SQC SQD SQE SQF SQG SQH SQJ SQK SQL SQM SQN SQP SQQ SQR SQS SQT SQU SQY SR ST STA STC STE STG STP
Description Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations. (free for use). Road installations.(free for use). Road installations. (free for use). Road installations. (free for use). Control and protection equipment. Workshop, stores, laboratory equipment and staff amenities inside controlled area. Workshop, stores, laboratory equipment and staff amenities outside controlled area. Workshop equipment outside controlled area. Maintenance areas outside controlled area. Stores and filling station equipment. Laboratory equipment. Staff amenities.
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
85/102
Rev. A
Key
Description
U
UA UAA UAB UAC UAE UAF UAG UAH UAJ UAM UAT UAU UAV UAW UAX UAY
UAZ
UB UBA
UBB
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
86/102
Rev. A
Key UBC UBD UBE UBF UBG UBH UBJ UBK UBL UBM UBN UBP UBQ
Description Structure for back-up transformers. Foundations / pit / building. Structure for station service transformer. Foundations / pit / building. Structure for unit service transformer. GT, ST, GT/ST unit; foundations / pit / building. Structure for transformer area. Foundation / pit / building. Structure for start-up transformer. Foundation / pit / building. Structure for common oil collecting pit. Foundation / pit. Structure for transformer rail system. Foundation / excavation work. Transformer assembly building. Shelter / building. Structure for busbars. GT, ST, GT/ST unit; foundations, steel construction. Structure for transformer cooling system. GT, ST, GT/ST unit; foundations / pit / building. Structure for standby / emergency generator set. (Diesel / turbine). Structure for blackstart generating set. (Diesel / turbine). Structure for standby / emergency / black start generating set fuel supply. Diesel / gas / kerosene etc. Structure for power transmission and auxiliary power supply. (free for use). Structure for MV/LV auxiliary transformer. Foundation / shelter / building. Structure for LV/LV auxiliary transformer. Foundation / shelter / building. Ground grid outside *UA* area. Ground grid outside UA area. Various mesh sizes. Special structure (plant specific). Power cable bridge structure for main and auxiliary distribution ROP area. Power cable ducting structure for main and auxiliary distribution ROP area. Structures for instrumentation and control (I&C). Unit control building. Central control building. Local control modules. GT local control module - container / room / annex. ST local control module - container.
Identification number Rev. Date Lang. Sheet
UBR UBS UBT UBU UBW UBX UBY UBZ UC UCA UCB UCC
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
87/102
Rev. A
Description Local (decentralized) control buildings. Building / container / shelter. Structure for water supply / waste water disposal control system. Building / container / shelter. Structure for HRSG control system. Building / container / shelter. Structure for local metering equipment - steam water cycle. Building / container / shelter. Structure for conrol system of air cooled condenser. Building / container / shelter. Structure for metering & control system of process steam / process hot water. Building / container / shelter. Structure for cooling water measuring equipment. Building / container / shelter. Structure for cooling tower control system. Building / container / shelter. Structure for sea water desalination plant control system. Building / container / shelter. Special structure (plant specific). Control cable bridge structure for main and auxiliary distribution ROP area. Control cable ducting structure for main and auxiliary distribution ROP area. General items. General items (mobilisation and demobilisation). Provisional sum (PI/ROP). Site dewatering (PI/ROP). Site survey (PI/ROP). Soil improvement (PI/ROP). Piling (PI/ROP). UDK Soil investigation (PI/ROP). Site clearing and tree cutting (PI/ROP). Demolition work (PI/ROP). Structure for modification, repair and renovation of existing structures (PI/ROP). Structures for conventional fuel supply and residues disposal. Structures for coal gasification / liquefaction. Structures for unloading and reception of liquid fuels. Oil discharge station - lorry / train / ship
Identification number Rev. Date Lang. Sheet
UCP UCR UCV UCX UCY UCZ UD UDA UDD UDE UDF UDG UDH UDL UDM UDN UE UEG UEH
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
88/102
Rev. A
Key
UEJ
UEK
UEM
UEN
UEP
UEQ
UEJ Structures for storage of liquid fuels. CIVIL Tank foundation / containment - diesel oil / dirty oil / heavy oil / naphta / kerosene etc. UEK Structure for oil separator at oil unloading station and storage. CIVIL UEL Structure for oil forwarding pump station. CIVIL Building / shelter. UEM Structure for treatment and handling of liquid fuels. CIVIL Oil conditioning plant, oil additive supply and store UEN NG/LG/BFG - gas terminal and treatment station. CIVIL Gas terminal (metering, control etc.), discharge station, pressure reduction station gas conditioning plant (filters, condensers, separators etc.), booster plant incl. cooling. UEP LG/BFG - condensate collection tank (residue disposal). CIVIL Foundations / shelter / building for gas condensate collection tank. UEQ LG (liquid gas) treatment plant. CIVIL incl. heating / cooling medium system foundation / shelter / building. Structures for forwarding of gaseous fuels. Foundations / supports for gas pipeline. Structure for oil sludge disposal. Building / shelter / pit. Structure for combustion residues handling. Foundation / shelter / building. Special structure (plant specific). Pipe & cable bridge structure for fuel distribution ROP area. Pipe & cable ducting structure for fuel distribution ROP area. Structures for water supply and disposal. Structures for raw water supply, cleaning and treatment. Raw / city / ground water pumping station incl. mech. cleaning and transport structures. Structure for raw water system. Structure for storage tank / pond / pumping station. Structure for raw and de-mineralised water storage and forwarding. Structure for storage tank / pond / pumping station. Structure for water demineralization system. Structures for treatment plant, water storage tank / pond / pumping station incl. dosing, electrical and control systems. Structure for neutralization system incl. dosing plant. Structures for neutralization tank / pit / dosing plant.
UGB UGC
UGD
UGE
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
89/102
Rev. A
Description Structure for fire extinguishing water storage and forwarding. Structures for storage tank / pond / pumping station. Potable water treatment plant, storage incl. pumping station. Structures for storage tank / pond / pumping station. Structures for rainwater collecting and treatment system. Structures for surface water catchment pond incl. sand trap and pumping station sand and residue disposal, rain and fire fighting retention pond. Structure for sand trap / settling pond. Structures for biological and chemical raw water treatment plant. Structure for settling pond incl. pumping station, dosing and outlet control equipment used in domestic water treatment. Flocculator structure. Structure for flocculation plant incl. inlet and outlet channels used in process drains precleaning plant and sludge disposal / domestic waste water treatment. Structures for filters, dosing, electrical and control systems. used in process drains precleaning plant and sludge disposal / domestic waste water treatment. Structures for clean water storage incl. pumping station. used in process drains precleaning / treatment plant and sludge disposal / domestic waste water treatment. Structure for sludge treatment system. incl. inlet and outlet channels. Sludge dewatering building. Structures for sludge press incl. auxiliaries / waste water collection and return ponds. Sludge storage structure. used in process drains precleaning plant and sludge disposal / domestic waste water treatment. Structure for operational / chemical waste water treatment incl. pumping station. collection pond incl. pumping station, cooler etc. structures for (chemical) treatment plant and residue storage / disposal. Calming pond incl. outlet regulation. used in process drains precleaning plant and sludge disposal / domestic waste water and rainwater teratment / disposal. Oil separator pit incl. oil sludge collection. used in process drains precleaning plant and sludge disposal / domestic waste water and rainwater teratment / disposal. Structure for sanitary waste water treatment incl. pumping station. Structure for septic tank incl. pumping station / BioGest plant / disposal. Storm water evaporation pond. Sewage collecting pond and treatment incl. sludge pit, clean water return channels, pure water return / inlet structures. Special structure (plant specific).
UGJ UGK
UGL
UGM
UGN
UGP
UGQ
UGR
UGS
UGT
UGU
UGV
UGW
UGX
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
90/102
Rev. A
Description Pipe bridge structure for water distribution / waste water collecting - ROP area. Pipe & cable ducting structure for water distribution / waste water collecting - ROP area. Potable water system. Demineralized water system. Surface / storm water system. Sanitary water drainage. Oily water drainage. Boiler blowdown drainage. Structures for conventional heat generation. Structure for HRSG / HRSG housing. Foundation / pit / shelter / building. Foundations for HRSG auxiliaries.Foundation / pit / shelter / building. Structure for exhaust gas ducts / housing (GT to HRSG). Foundation / pit / shelter / building. (if in HRSG scope of supply). Structure for bypass stack / housing. Foundation / pit / shelter / building. (if in HRSG scope of supply). Structure for boiler compressed air supply. Foundation / shelter / building. Structure for exhaust gas ducts (HRSG to stack). Foundation / pit / shelter / building. Structure for exhaust gas stack (free standing). Foundation / pit. Structure for flue gas treatment system (mechanical). Foundation / pit / shelter / building. Structure for flue gas treatment system (catalytic process). Foundation / pit / shelter / building. Structure for flue gas treatment system (catalytic process). Foundation / pit / shelter / building. Structure for emission monitoring station. CEMS container. Structures for HRSG blowdown equipment. Foundation / shelter / building. Structure for HRSG enclosure and housing. Foundation / shelter / building. Bridge structure. Ducting structures. Structures for steam-, water-, gas cycles. Structure for feedwater system. Foundation / shelter / building for feedwater tank / pumping system. Structure for condensate system. Fondation / shelter / building for condenser, condensate pumps, ADV, clean condensate collecting tank etc.
Identification number Rev. Date Lang. Sheet
UHH
UHL UHM UHN UHQ UHR UHS UHT UHW UHX UHY UHZ UL ULA
ULC
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
91/102
Rev. A
Description Structure for condensate polishing plant. Foundation / shelter / building. Structure for exhaust steam pipes (steam turbine - air cooled condenser). Foundation / shelter / building. Structure for ACC (air cooled condenser) area. Foundation / support / shelter / building. Structure for air cooled condenser auxiliaries. Foundation / shelter / building. Structure for atmospheric drains vessel (ADV) (*LCM*). Foundation / shelter / building. Structure for clean drains pumps (*LCM*). Foundation / shelter / building. Structure for auxiliary condensate collecting tank (*LCN*). Foundation / shelter / building. Structure for auxiliary condensate pumps (*LCN*). Foundation / shelter / building. Structure for chemical dosing system (*LFN*). Foundation / shelter / building. Structure for sampling system (*QUL*). Foundation / shelter / building. Special structures (plant specific). Bridge structures. Pipe ditch & cable duct structure for W/S cycle - outside power island. Structures for main machine sets. Steam turbine building / ST outdoor area incl. crane support structure. Table / floor construction, foundations for crane rails in ST outdoor area, foundations for ST auxiliaries. Complete ST foundations: *MPA*. Gas turbine building / GT outdoor area incl. crane support structure. Table / floor construction, foundations for crane rails in GT outdoor area, foundations for GT auxiliaries. Complete GT foundations: *MPA*. GT/ST building and outdoor area incl. crane support structure (single shaft). Table / floor construction, foundations for crane rails in GT / ST outdoor area, foundations for GT / ST auxiliaries. Complete GT / ST foundations: *MPA*. Common GT/ST building and outdoor area incl. crane support structure(multi shaft). Table / floor construction, foundations for crane rails in GT / ST outdoor area, foundations for GT / ST auxiliaries. Complete GT / ST foundations: *MPA*. Structure for exhaust gas duct / housing (GT to HRSG). Foundation / shelter / building. (if in GT scope of supply).
ULG ULH ULJ ULK ULS ULT ULV ULW ULX ULY ULZ UM UMA
UMB
UMC
UMD
UMF
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
92/102
Rev. A
Description Structure for bypass stack / housing. Foundation / shelter / building (if in GT scope of supply). Annex structure to *UMA*, *UMC* or *UMD* for process energy supply. (if annex only and no separate structure for process energy supply *UN*). Annex for circulating (main cooling) and service (secondary cooling) water pipes. (structures for main and secondary cooling water pipes in *UMA*, *UMC*, *UMD*). Air storage structure (GT combustion air reservoir plant). cavern / building. Annex for components of blast furnace gas supply. (only if annex to *UMB*, *UMC* or *UMD*). Connecting structures between main machine set halls. (subways, gangways, covered paths etc.). Special structure (plant specific). Pipe bridge & cable rack structure for main machine set systems ROP area. ( not *ULY*, *UNY*). Pipe ditch & cable duct structure for maim machine set system - ROP area. Structures for process energy / media supply for external users. Structure for process steam station. e.g. for metering and control station, distribution; foundation / shelter / building. Structure for process steam condensate return. e.g. storage tank, forwarding station; foundation / shelter / building. Structure / annex for hot water pumping station. (e.g. for district heating); foundation / shelter / building. Structure / annex for process heat transfer. (e.g. heater / heater-condenser for hot water processing); foundation / shelter / building. Structure / foundation for hot water pond. Foundation / shelter / building. Containment for hot water pond. Fundation / shelter / building. Structures for chilled water supply. Special structure (plant specific). Pipe bridge & cable rack structure for process steam/hot water - ROP area (not *ULY*). Pipe ditch & cable duct structure for process steam/hot water ROP area (not *ULY*). Structures for cooling water systems (water intake and cleaning). Circulating (main cooling) water intake structure. (intake head, shaft etc.); underwater structures.
Identification number Rev. Date Lang. Sheet
UMP
UMZ UN UNA
UNB
UNC UND
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
93/102
Rev. A
Description Service (secondary cooling) water intake structure. (intake head, shaft etc.); underwater structures. Circulating (main cooling) water intake structure. channel / pipe. Service (secondary cooling) water intake structure. channel / pipe. Circulating (main cooling) water source. Intake underwater and shore / bank structures. Service (secondary cooling) water source. Intake underwater and shore / bank structures. Shore structure and embankment. Shore structure and bank works. Circulating (main cooling) water treatment structures. for mechanical cleaning, chemical dosing equipment, settling pond for main cooling water. Service (secondary cooling) water treatment structures. for mechanical cleaning, chemical dosing equipment, settling pond for secondary cooling water. Circulating (main cooling) water feed inlet culvert. from mechanical cleaning (*UPE*) to pump house (*UQA*). Service (secondary cooling) water feed culvert. from mechanical cleaning (*UPF*) to pump house (*UQB*). Biocide treatment building. Annex building / structure for chlorine dosing plant incl. storage. Structure for electro-chlorination plant. Foundation / shelter / building. Flushing water system. channel from mechanical cleaning to return. Screen wash water cleaning structure. Building, space / pit for dirt container. Foundation / shelter / building. Structure for waste storage and disposal. Foundation / pit. Structure. storage space for insulating closure slabs. Foundation. Special structure (plant specific). Cooling water pipe bridge - between pumphouse and turbine building. Cooling water pipe/duct/channel - between pumphouse and turbine building. Structures for cooling water systems (forwarding and outfall). Circulating (main cooling) water pump station (direct cooling). incl. mech. cleaning structures, direct cooling Underwater / pit / shelter / building. Service (secondary cooling) water pump station. incl. mech. cleaning structures, direct cooling Underwater / pit / shelter / building.
Identification number Rev. Date Lang. Sheet
UPJ
UPN UPP UPQ UPR UPS UPT UPU UPV UPW UPX UPY UPZ UQ UQA
UQB
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
94/102
Rev. A
Key UQC
Description Circulating (main cooling) water pump station. excl. mechanical cleaning structure, cooling tower Underwater / pit / shelter / building. Service (secondary cooling) water pump station. excl. mechanical cleaning structure, cooling tower Underwater / pit / shelter / building. Cooling water overflow structure, surge tank / chamber. Underwater / pit. Screen wash water discharge culvert / channel. Underwater / channel. Cooling water seal pit, aeration, incl. outfall. Underwater / pit. Cooling water de-aeration structure. Underwater / pit. Service (secondary cooling) water surge pond. Underwater / pit. Service (secondary cooling) water collecting pond. Underwater / pit. Circulating (main cooling) water return channel. Underwater / channel. Service (secondary cooling) water return channel. Underwater / channel. Circulating (main cooling) water outfall / return structure. Underwater / pit. Service (secondary cooling) water outfall / return structure. Underwater / pit. Circulating (main cooling) water discharge structure. Undervater. Service (secondary cooling) water discharge culvert. Undervater. Circulating (main cooling) water spillway structure incl. aeration structure. Underwater / bank / shore structure. Structure for artifical circulating (main cooling) water aeration. Underwater / pit. Routing structure for circulating (main cooling) water discharge. Underwater / bank / shore structure. Special structure (plant specific). Main / secondary cooling water return/discharge pipe bridge. Ducting structure. Structures for circulating (cooling) water systems (recirculation). Cooling tower structure for circulating (main cooling) water. Foundation / pit / basin / structure. Cooling tower structure for service (secondary cooling) water. Foundation / pit / basin / structure.
Identification number Rev. Date Lang. Sheet
UQD
UQG UQH UQJ UQK UQL UQM UQN UQP UQQ UQR UQS UQT UQU
UQV
UQW
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
95/102
Rev. A
Key URG URH URJ URK URL URM URN URP URQ URR URX URY URZ US USA USB
Description Cooling tower connecting structure. Foundation / channel. Cooling tower outlet structure. Foundation / pit / channel. Cooling tower outfall culvert. Foundation / channel. Cooling tower return structure. Foundation / pit / channel. Cooling tower return culvert. Foundation / pit / channel. Circulating (main cooling) water distribution structure. Foundation / pit / channel. Cooling tower bypass structure. Foundation / pit / channel. Cooling tower blowdown structure. Foundation / pit / channel. Cooling tower blowdown culvert. Foundation / pit / channel. Structure for closed cooling water system. e.g. foundation / support for air blast intercoolers. Special structure (plant specific). Bridge structures. Ducting structure. Structures for ancillary systems. Structure for central HVAC system and compressed air plant. Foundation / shelter / building. Structure for space heating systems. e.g. boiler house / foundations / shelters for space heating units etc. Structure for stationary compressed air supply system (not *UTF*). Foundation / shelter / building. Fire extinguishing water pumping station. Foundation / shelter / building. Structure for waterway facilities. Underwater / pit / shore- / bank-structure / foundation / shelter etc. Combined workshop and storage building. Shelter / building. Workshop building. Shelter / building. Storage building, covered storage area, warehouse. Shelter / building. Laboratory building. Building. Special structure Bridge structure.
USC
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
96/102
Rev. A
Description Ducting structure. Structures for auxiliary systems. Common / central structure for auxiliary systems (processrelated). Foundation / shelter / building. Structure for central water chilling plant. Foundation / shelter / building. Structure for central compressed and control air supply (*QE*, *QF*). Foundation / shelter / building. Structure for central gas supply (not fuel gas). Foundation / shelter / building. e.g. hydrogen / nitrogen bottle / tank stored. Auxiliary steam generator building. Foundation / shelter / building. Structure for auxiliary steam generator stack (not *UHN*). Foundations. Structures for hydrogen production plant. Foundation / shelter / building. Structure for chemicals storage. Foundation / pit / shelter / building. Containment in the chemicals unloading area. Foundation / pit / shelter / building. Special structure. Bridge structure. Ducting structure. Structures for external systems (power plant-specific). Structure for seawater desalination plant (in general). Foundation / shelter / building. Structures for brine storage and conditioning system. incl. blowdown pit and pumping station. Structure for seawater desalination plant auxiliaries. Foundation / shelter / building. Structure for storage and forwarding of desalinated sea water. Foundation / pit / shelter / building. Structure for desalinated seawater storage tanks. Foundation / pit. Structure for desalinated seawater pump station. Foundation / shelter / building. Cathodic protection (ROP). Foundation / shelter / building. Grounding (PI), (ROP). Foundation / shelter / building. Structure for seawater supply. Seawater intake head channel / pipe, structure and embankment, supply channel from mechanical cleaning.
Identification number Rev. Date Lang. Sheet
UTB UTF
UTG
UTH UTJ UTM UTS UTT UTX UTY UTZ UX UXA UXB UXC UXD
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
97/102
Rev. A
Key UXQ
Description Structure for seawater cleaning and forwarding. Mechanical cleaning and chemical dosing plant. structures for chlorination plant, pump station. Special structure for bridge and duct (ROP). eg. Structure for bridge and duct (PI), (ROP). Foundation / shelter / building. Bridge structure. Ducting structure. General service structures. Office and staff amenities building. Building. Staff amenities building. Building. Administration building. Building. Canteen. Building. Gate house. Building. Security gate house, guard tower. Building. Information center. Building. Training facilities. Building. Medical center. Building. Railway engine shed. Foundation / shelter / building. Fire station. Foundation / shelter / building. Garage. Foundation / shelter / building. Automobile workshop. Vehicle repair shop; Foundation / shelter / building. Petrol station. Foundation / shelter / building. Special structure (plant specific). Bridge structures. Ducting structures. Structures for transport, traffic, fencing, gardens and other purposes. Structure for roads, parking and fences (infrastructure). Road construction, parking, fences, hard standing area. Open areas and yards (general). e.g. helicopter landing area, deposit area, storage area, scrap
Identification number Rev. Date Lang. Sheet
UXX
UXY UXZ UY UYA UYB UYC UYD UYE UYF UYG UYH UYJ UYN UYP UYQ UYR UYS UYX UYY UYZ UZ UZA UZC
Originator
AMA/00/M/-------PMF/NA/252
14.09.2011
En
98/102
Rev. A
Key
UZD UZE UZF UZJ UZK UZL UZM UZN UZP UZQ UZR UZS UZT
Parking areas, incl. associated structures. Road construction / shelter. Railway structure incl. acces railway and internal rail system. Track construction. Lifting gear structure. Track construction / foundation. Fencing and gates. Foundation. Structure for landscaping, gardening and outdoor work. Green areas / landscaping / fountains etc. Noise abatement structures. Protective structures against external impact. e.g. security walls etc. Structure for shore protection and jetty. Structure for bank / shoreline stabilization. e.g. fender wall etc. Structure for river regulation. Hydraulic engineering. Jetty, quay. Hydraulic engineering. Breakwater. Hydraulic engineering. Open land, building lots, site owner rights Building site preparation, power plant site, recreation area, meteo station etc. Site security structure. Structure for site stabilization / slope protection. Site preparation (PI/ROP). Site surveying, soil investigation, site dewatering structures, soil improvement, piling. Structure for independent buildings and residential area. Building. Special structures (plant specific). Bridge structures. Ducting structures.
UZU UZV
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
99/102
Rev. A
Key
Description
X
XJ XJA
XJB
XJG
XJH
XJK XJN
XJP XJQ
XJR
XJV
AMA/00/M/-------PMF/NA/252
14.09.2011
En
100/102
Rev. A
Description Exciter set (use only if *XKC* is not sufficient for identification). Exciter set. Bearings. Stator/rotor liquid cooling system, incl. coolant supply system (Note: for cooling oil see *XKU*). Task: dissipate heat produced by stator/rotor to coolant from excl. stator/rotor outlet to excl. stator/rotor inlet. Stator/rotor gas cooling system, incl. coolant supply system (Note: for nitrogen cooling see *XKH*). Task: dissipate heat produced by stator/rotor to coolant from excl. stator/rotor outlet to excl. stator/rotor inlet. Stator/rotor nitrogen cooling system, incl. coolant supply system (Note: for other gas cooling see *XKG*). Task: dissipate heat produced by stator/rotor to coolant from excl. stator/rotor outlet to excl. stator/rotor inlet. Exhaust gas system (if separate from *XKG* and *XKH*). Stator/rotor cooling oil cooling system, incl. coolant supply system (Note: for other liquid cooling see *XKF*). Task: dissipate heat produced by stator/rotor to coolant from excl. stator/rotor outlet to excl. stator/rotor inlet. Lubricant supply system (if separate system for generator). Sealing fluid supply system (Sealing oil system, incl. supply and treatment). from excl. branch off sealing oil supply system to excl. stator inlet and from excl. stator outlet to excl. inlet to other system or in closed systems from excl. stator outlet to excl. stator inlet. Fluid supply system for control and protection equipment. Control and protection equipment. Common installations for heavy machinery. Foundations. Sheating. Frame, support structure. Forced cooling system. Drying and layup system.
XKG
XKH
XKQ XKU
XKV XKW
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
101/102
Rev. A
Key
Description
Z
ZA ZB ZC ZM ZMB ZZ
Originator
Identification number
Rev.
Date
Lang.
Sheet
AMA/00/M/-------PMF/NA/252
14.09.2011
En
102/102