Sunteți pe pagina 1din 44

Technical and general information included in this document cannot engage in any way the responsibility of Clesse Industries.

- Gradiva s : 00 33 4 78 22 45 69

ClESSE INDUSTRIES with its world renowned brands CLESSE and NOVACOMET, designs, manufactures and supplies product serving the LP Gas industry. Part of the COMAP group, CLESSE INDUSTRIES is the division specialising in and dedicated to LP Gas. Our organisation revolves around 3 industrial sites with key facilities located in France, Italy and Brazil, coupled by a complete sales network boasting a leading presence on all continents. Our product range is based primarily on gas regulators, tank equipment, valves, and accessories for LP and other types of gases. For more than 50 years CLESSE INDUSTRIES has been recognised as the reference for professionals in the LP Gas industry, and is proud to offer the widest range of regulators and gas accessories available on the market.

Contents
This catalogue presents the basic range of Novacomet regulators and accessories. Upon request personalised products can be developped to satisfy any particular application.

REFERENCE

PAGE

REFERENCE

PAGE

REFERENCE

PAGE

USERSGUIDE TERMINOLOGY, ADVICE AND WARNINGS 4 TYPICAL INSTALLATIONS TABLES EXPLANATIONS INLET AND OUTLET CONNECTION TABLES 7 7 8 BP1803 BP1813

LOW PRESSURE REGULATORS 24 25 26 27 28 29 30 31

CYLINDER LOW PRESSURE REGULATORS AND ADAPTORS ZIPPY REGULATORS 36

ZP10 REGULATORS-ZIPPY ADAPTATORS 37 EUROPA 2S EUROPA 5 RVT - 425 38 39

RPBS 37/22 BP2202FV BP2205

HIGH PRESSURE REGULATORS APR85 - APR85EFV - LPR85 APR85R - APR8510 - APR8510EFV APO APZ120 - LPZ120 APZ120R - APZE APZ250 - APZ250R - LPZ250 APZ400 - APZ400V - APZ400R APZ400/OPSO 12 13 14 15 16 17 18

BP2210 - BP2210/OPSO BP2303 - BP2303R - BP2303/OPSO BP2402 - BP2402R - BP2402/OPSO

MULTI-CYLINDER SYSTEMS MCH6795-4100 - MCTR6700-6702 CTR6600 40

BP2402L - BP2402F - BP2402F/OPSO 32 ACCESSORIES HIGH AND LOW PRESSURE REGULATORS B2303AP - BP2303BP 33 FILTERS AND CARTRIDGES PRESSURE GAUGES CHANGEOVER INDICATORS BALL VALVES 620 - 627 - 621 LOW PRESSURE AUTOMATIC CHANGEOVERS 5165 - COMPACT80 - 9165BP22 34 41 42 42 43

AP40 - AP40V - AP40R - LP40 - AP40/OPSO 19 APS1000 - APS1000R - LPS100 APS1000/OPSO 20

HIGH PRESSURE AUTOMATIC CHANGEOVERS 155 - 165 - 2165 ACH2600 126 - 126CS 21 22 23

GOVERNORS STB 284-295-296-281 35

Users guide
TERMINOLOGY, ADVICE AND WARNINGS CONNECTIONS
The inlet or outlet connections are described by: - A code and a condensed description in the product tables. - A code and a full description in the connection table. - This provides the following benefits: continuous flow of gas, no more risk to run out of gas use of 100% of the gas in the cylinder high capacity with the minimum number of cylinders. - The automatic changeover device also provides a first stage regulation function. Some automatic changeover devices are equipped with an integral second stage regulator providing a single stage function.

There are so many types of connections that we recommend carefully checking the full description, using the connection code and the table.

LIMITORS
The limitor is a high pressure regulator mounted in series with the normal high pressure regulator (or the high pressure automatic changeover device) for safety purpose. Its outlet pressure is set to a pressure which is slightly above that of the latter. It allows continuous running of the installation even if the normal high pressure regulator(or automatic changeover device) is faulty. When the installation includes a limitor, the guaranteed flow rate of the assembly (regulator+limitor) is reduced (-35% approx.).

REGULATION STAGES
In an LPG installation, there can be one, two or three pressure regulation stages. Depending on the number of stages and on the relative position, the regulator or the automatic changeover function is called:

- SINGLE

STAGE :

The regulator or the automatic changeover reduces the pressure from the vessel pressure directly down to the appliance pressure.

INLET PRESSURE
The inlet pressure (Pe) can be expressed in minimum and maximum values. When supplied with whatever pressure within the declared range of inlet pressure, the regulator is able to deliver a stable outlet pressure with the specified type of gas and with whatever flow rate less than the declared one. For LPG first or single stage regulators, the maximum inlet pressure is often declared at 16bar (230psig), as defined in the EN standard, but all these LPG regulators withstand inlet pressures up to 20bar (290psig).

- FIRST

STAGE :

The regulator or the automatic changeover reduces the pressure from the vessel pressure down to an intermediate pressure.

- SECOND

STAGE :

The regulator reduces the pressure from the intermediate pressure down to the appliance pressure or to a second intermediate pressure.

- THIRD

STAGE :

The regulator reduces the pressure from the second intermediate pressure down to the appliance pressure.

TYPE OF NOMINAL OUTLET PRESSURE SETTING


The nominal outlet pressure (Pa.nom) can be: - FIXED: outlet pressure is factory preset, with no possibility of readjustment.

HIGH OR LOW PRESSURE REGULATOR, GOVERNORS


For LPG installations the regulators families are generally defined as follows:

- HIGH

PRESSURE REGULATORS :

Example: 37mbar - ADJUSTABLE: the outlet pressure is factory set; it can be readjusted internally, after having disassembled the cap. Example: 30(2040) mbar means preset at 30mbar, adjustable between 20 and 40mbar. The cap can be: - Hand screwed, non sealable - Hand screwed, sealable - Dismountable only with a special spanner

Regulators delivering an outlet pressure (fixed or variable) higher than 500mbar (7psig). They are defined as single or first stage regulators.

- LOW

PRESSURE REGULATORS :

Regulators delivering an outlet pressure (fixed, adjustable or variable) lower than 500mbar (7psig). They are defined as single, second or third stage regulators.

- GOVERNORS:
Special type of regulators installed close to or in a gas appliance. Supplied with a low pressure (less than 200mbar (3psig)) they deliver a very stable pressure to the gas appliance. They are normally defined as third stage regulators.

- adjustments cannot be used as a means of shutting off gas flow. - Adjusters shall not be removed or replaced.

AUTOMATIC CHANGEOVER DEVICES


- Automatic changeover devices are used mainly with 2 LPG cylinders or 2 LPG cylinder batteries. Large capacity models can also be used with 2 LPG tanks - The first cylinder (or cylinder battery) is called "service" the second is called "reserve". The automatic changeover firstly takes the gas from the "service" cylinder. When the "service" cylinder is empty or when its vaporising capacity is not sufficient (high flow rate during a long time, use of butane-propane mixture, low temperature, low level in the cylinder,...) it automatically changes to and takes the main flow from the reserve cylinder. An indicator (on the device or installed on the gas line) shows that the "service" cylinder is empty.

- VARIABLE: the outlet pressure can be set using external means.


Examples: - 20-300mbar means: minimum setting 20mbar, maximum setting 300mbar - (0)1-3bar: The recommended (for guaranteed performances) setting range is between 1 and 3 bar; in certain circumstances the outlet pressure can reach 0 bar (no flow). External means can be: - A multi-turn screw with hexagonal head Recommended when no frequent setting is requested. A manometer is recommended - A multi-turn screw with handwheel Recommended when frequent setting is requested. A manometer is recommended

M M M

Users guide
TERMINOLOGY, ADVICE AND WARNINGS
- A one-turn hand wheel with positioning figures Recommended when frequent setting is requested. A manometer is not necessary.

M M M

FOR

INTERMEDIATE LPG OUTLET PRESSURES LIMITS ARE :

Pa.min Pa.max Pa.o

= = =

Pa.nom x 0,7 Pa.nom x 1,2 Pa.nom x 1,3

W A R N I N G - Setting shall not be used to shut off the gas flow - Setting means must not be replaced.

FOR

FIRST STAGE AUTOMATIC CHANGEOVER DEVICES :

The outlet pressure is noted with service and reserve values. Example:1,50,8 bar means that the nominal outlet pressure are: - 1,5 bar when running on the service vessel - 0,8 bar when running on the reserve vessel

OUTLET PRESSURE GUARANTEED FLOW RATE


For whatever inlet pressure (Pe) within the declared range, for whatever flow rate less than the declared guaranted flow rate (Qg) and with the declared gas, the outlet pressure (Pa) is stabilised between the following limits:

GUARANTED FLOW RATE TYPE OF GAS


Most of the regulator guaranteed flow rates are declared using propane gas. To calculate the guaranteed flow rate (Q) with other gases, use these conversion formula: Qbutane (kg/h) = 1,14 x Qpropane (kg /h) Qnat.gas (m3/h) = 0,82 x Qpropane (kg /h) = 0,63 x Qpropane (kg/h) Qair (m3/h)

Pa.min: MINIMUM OUTLET PRESSURE Pa.max: MAXIMUM OUTLET PRESSURE Pao: LOCK-UP PRESSURE TYPICAL CURVES: HIGH PRESSURE REGULATORS
Pao Pa max Pa nom Pa min Pe min Pe max

RUBBER MATERIAL GAS QUALITY


All the regulators are built to withstand the use of LPG (liquefied petroleum gas) in vapour phase, NG (natural gas), air, nitrogen. In order to ensure correct operation and a long life expectancy, the gases employed should be sufficiently pure, and should contain no aggressive components (sulphurous compounds, phtalic compounds, etc.). In the case of suspicious presence of aggressive components, regulators using FPM rubber components (membrane, valve pad,...) are proposed or can be provided.

Pe nom

Qg

LOW

PRESSURE REGULATORS

TEMPERATURE
Pe max Pe nom Pe min

Pao Pa max Pa nom Pa min

Regulators equipped with membranes and valve pads made in NBR are suitable for temperatures (ambient or gas) between 20C (-4F) and +60C (+140F). Regulators equipped with membranes and valve pads made in FPM are suitable for temperatures (ambient or gas) between -10C (-4F) and +80C (+175F). Warning: gas temperature close downstream to an LPG vaporiser can reach high temperatures.

Qg

PRESSURE RELIEF VALVE


F OR
LOW PRESSURE

LPG

REGULATORS SUPPLYING DIRECTLY TO GAS

APPLIANCES COMPLYING WITH

EN437,

LIMITS ARE :

Regulator outlet pressure (mbar) Gas

Pa.nom

Pa.min

Pa.max

Pa.o

Max. pressure loss (1) (mbar)

Appliance Categories

It is a safety device for the relief of excess pressure. Excess pressure can result from: a- Thermal expansion of trapped gas b- Creeping lock-up pressure due to dirt between seat and pad c- Breakage of regulator components There are two types of relief valves: - Limited relief valve (LRV) which relieves a low flow (less than 10% of nominal regulator flow rate) and answers to excess pressures a & b. - Full relief valve (FRV) which relieves a high flow (100% of the nominal regulator flow rate), keeping the outlet pressure generally below 140mbar (2psig) for low pressure regulators. It answers to excess pressures a, b & c. Full relief valves are designed in accordance with US standards (UL-ANSI).

Butane Butane Butane LPG LPG Propane Propane Propane Propane


(1)

29 (28-30) 50 112 29 (28-30) 50 37 50 67 148

22 47,5 65 27 47,5 27 47,5 55 105

35 57,5 140 35 57,5 45 57,5 80 180

40 62,5 145 40 62,5 50 62,5 85 185

2 5 5 2 5 2 5 5 5

3B and 3+ 3+ 3+ 3B/P 3B/P 3P and 3+ 3P 3+ 3+

CONSTRUCTION

CAN BE :

- Internal (Int): relief through the vent. - External (Ext): special device fitted on the regulator.

M M M

maximum pressure loss between the regulator and the appliance

Users guide
TERMINOLOGY, ADVICE AND WARNINGS APZ400
M M M

VENT
- VENT
POSITION .

When necessary, the position of the regulator vent is defined by a clock position looking from the top and starting from the outlet connection. 0h = over the outlet connection, 6h= opposite to the outlet connection

- VENT

CONNECTION .

On certain regulators the vent can be connected to a pipe. The connection of a pipe is recommended (or mandatory, depending on local regulations) when the regulator is installed indoors, in order to convey any possible gas leakage outside.

- Welding / soldering on pipes must not be carried out when the regulator is installed. - The full gas piping must be carefully cleaned before the regulator is installed - It is recommended to install a filter upstream from the regulators. The dimension of the filter must be such to induce acceptable pressure loss. The filter must be cleaned periodically. - The regulator vent shall always be kept clear and protected from rain. Take the necessary precautions to prevent it from being obstructed by external elements such as ice, snow, etc.

OPSO SAFETY DEVICE


The OPSO (Over Pressure ShutOff) safety device, cuts off the gas flow in the event of abnormal overpressure that can be caused, for example, by an operating fault in a regulator (impurities on the valve seat or deterioration of a part) or by a defect in installation. OPSO safety devices can apply either on high or low pressure regulators. The triggering pressure of OPSO safety devices is adjustable. NOTE: In the event that the installation is pressurized but without any gas flow for a certain time, the temperature of the gas trapped in the tubes and regulators may rise, thus leading to an overpressure level that can trigger the OPSO safety valve. To avoid this problem, and provided that the solution is authorized, we recommend the use of a relief valve (separate or integrated in the regulator), especially for low pressure levels.

- LPG or Natural Gas leaks can cause death from fires or explosions. Install the regulators in a risk-free location. - All installation, adjustment and maintenance work must be carried out by persons who have acquired the necessary skills in relation to the type of gas and the function provided. - The installation must be fitted, adjusted, used and maintained in conformity with the regulations in force in the country concerned.

UPSO SAFETY DEVICE


The UPSO (Under Pressure ShutOff) function, cuts off the gas flow in the event of an abnormal fall in pressure that can be caused, for example, by: - Flow rate exceeding the capacity of the gas installation (tank, piping, regulator,...) - A leak into the open air, rupture of the pipe downstream, - A lack of pressure upstream. The UPSO safety device applies on low pressure regulators. The UPSO triggering pressure is not adjustable (except on BP2402F). On regulators provided with an adjustable outlet pressure, the triggering pressure is automaticaly adapted to the pressure setting.

CONFORMITY WITH STANDARDS AND REGULATIONS


- EUROPEAN PRESSURE EQUIPMENT DIRECTIVE - 97/23/CE (PED)
All the regulators and accessories used with pressures higher than 0,5bar (7,2psig) are manufactured in conformity with this directive. In accordance with this directive, only regulators with at least one connection with a dimension larger than DN25 (or 1) are marked.

- EUROPEAN GAS APPLIANCE DIRECTIVES 90/396/CEE (GAD)


Regulators and governors intended to be installed in a gas appliance, are manufactured in conformity with this directive.

MAINTENANCE AND DURABILITY


Normally the regulators do not require any maintenance. Functionality of the product and of the gas installation must be checked periodically. We recommend replacing the regulator after 10 years of use. The contents of this notice are provided for guidance purposes only and, although we have taken every precaution to ensure its accuracy, it should not be interpreted as representing any explicit or implicit guarantee covering the products or services described, or their use or applicability. We reserve the right to modify or improve the designs or the specifications of the products at any time and without notice. I

The UPSO safety device does not provide protection from all the risks stemming from leaks or ruptures in the installation downstream from the pressure regulator.

INSTALLATION
- Piping must be correctly sized in order to keep the pressure losses within acceptable limits. - The inlet pressure of a regulator must be kept within the declared limits taking into account: The vaporising capacity of LPG vessels or of the vaporiser The pressure loss of the pipes The pressure loss of the other gas equipment (meter, filter, valve,...)

Users guide
TYPICAL INSTALLATIONS AND TABLES EXPLANATIONS
Typical installations
Brazing, welding, roofing, road works and various hand craft applications. Radiant heater applications. Domestic or small commercial applications using a single cylinder. Domesctic or small commercial applications using a tank.

Multi-cylinder applications, not using automatic changeover devices.

Large commercial and industrial tank applications.

Automatic changeover applications.

Tables explanations
For complementary information, see Terminology, advice and warnings INLET CODE - INLET CONNECTION - OUTLET CODE - OUTLET CONNECTION
Code is from our own codification system. Connection is a condensed description. A complete description (type, dimensions, European Standard codes, gaskets,..) of the connection is given in chapter Connections table.

FLOW

RATE

This is the maximum flow rate for which a stable outlet pressure is guaranteed for whatever inlet pressure in the declared range. Flow rate is expressed in: kg/h and kBTU/hr for regulators mainly intended to be used for LPGas (n)m3/h and SCFH for regulators mainly intended to be used for Natural Gas.

PRV (TYPE)
When regulators are equipped with a Pressure Relief Valve, the type can be: LRV: Limited Relief Valve FRV: Full relief Valve

INLET PRESSURE (Pe)


Range of inlet pressure (Pe min Pe max) which allows the regulator to deliver a stable outlet pressure for whatever flow rate less than the declared one. For regulators provided with a variable outlet pressure, the minimum inlet pressure depends on the outlet pressure setting (Pa). Example: Pa+0,516bar means: minimum inlet pressure: 0,5bar in excess of Pa maximum outlet pressure: 16bar Inlet pressures are expressed in bar (or mbar) and psig (or inch water column).

VENT (POSITION CONNECTION)


When necessary, the position and the type of possible connection of the vent are indicated. Angular position is a clock reading, from the top of the regulator starting from the outlet. For example: 0h means on the outlet. Connection: DH means small holes on the cover, NC means non connectable.

UPSO
Y(yes) written when the regulator is equipped with an UnderPressure Shut Off safety device.

TYPE

OF ADJUSTMENT

When different types of outlet pressure adjustments are used on products of the same family, they are indicated: FIX: fixed setting, no possible adjustment VAR-HWMT: variable with a multiturn handwheel VAR-HEX: variable with a hexagonal bolt ADJ-NSL: adjustable internally, non sealable tap ADJ-SL: adjustable internally, sealable tap.

OPSO
The OverPressure Shut Off safety device can be equipped: to the entire family of regulators: it is written in the family title for example: BP2402-OPSO. to part of the product family: there is an OPSO column and Y/U (valve upstream) or Y/D (valve dowstream).

FILTER
Y(yes) written when the regulator is equipped with a filter on the inlet.

OUTLET PRESSURE (Pa)


For the regualtors, the type of writing depends on the type of pressure setting: Fixed setting: one single value. Example: 37mbar Adjustable (internal adjustment mean): preset value and range of adjustment ,between brackets. Example: 30(25-45)mbar Variable (external setting mean): range of settings. Example 1: 0,54bar, possible setting between 0,5 and 4bar Example 2: (0)13bar, recommended setting for guaranteed performances between 1 and 3bar, in certain circumstances setting can be between 0 and 1bar. For the automatic changeover devices the couple of values refers to service and reserve nominal outlet pressures. Outlet pressures are expressed in bar (or mbar) and psig (or inch water column).

MANOMETER/ INLET

OR

OUTLET (CONNECTION-TYPE)

For regulators: Mano: the regulator is equipped with a manometer. The manometer type can be: Dry or Oil (filled with oil). Plug: the regulator is equipped with a plug which allows further mounting of a manometer. The type of plug or manometer connection is written at the end, for example: G1/4. For automatic changeovers: MAGISCOPE or VIS are indicators for empty service cylinders.

PAD

MATERIAL

- DIAPHRAGM

MATERIAL

When different materials are used on products of the same family, they are indicated: NBR: nytril rubber, NBR-R: reinforced nytril rubber, FPM: fluoropolymer elastomer, FPM-R: reinforced fluoropolymer elastomer.

Users guide
INLET AND OUTLET CONNECTION TABLES
- CODE
From our own codification system.

- TYPE
Complementary information about the connection.

- D-H-S-C-L
Dimensions of the sketches.
CODE AND

- DESIGNATION
Condensed description of the connection.

- EN INLET

EN OUTLET

CODE

- GASKET
Describes, when appropriate, the material of the gasket: . NBR: nytril rubber . SALPA: non elastomeric compound. D H S C L (mm) (mm) (mm) (mm) GASKET

- DRAWING
Sketch of the connection for positioning the dimensions.

Codes of connections described in the European Standards: EN12864, EN13785 and EN13786. Not all the world-wide connections are described in these standards. TYPE EN EN Inlet Outlet code code

CODE

CONNECTION

DRAWING

C1A C1C C1D

CLIP-20 CLIP-21 CLIP-22

For Clip cylinder valve

G.52 G.53 G.54

-------

20 mm 21 mm 22 mm

-------

-------

-------

-------

-------

C1K

CLIP-27

For Clip cylinder valve

G.59

---

27 mm

---

---

---

---

---

C3A C3C

CLIP-16 CLIP-35 JUMBO

For Clip cylinder valve

G.50 G.56

-----

16 mm 35 mm

-----

-----

-----

-----

-----

E1A E1B E1D E1E

MAL-G1/8RH MAL-G1/4RH MAL-G1/2RH MAL-G3/4RH

ISO 228

-------

-------

G1/8RH-ISO228 G1/4RH-ISO228 G1/2RH-ISO228 G3/4RH-ISO228

---

---

---

---

---

E2A E2B E2D

MAL-R1/8 MAL-R1/4 MAL-R1/2

BSP-ISO7(conical)

-------

-------

R1/8-ISO7 R1/4-ISO7 R1/2-ISO7

-------

-------

-------

-------

-------

E5A E5B E5D

MAL-1/8NPT MAL-1/4NPT MAL-1/2NPT

NPT

-------

-------

1/8NPT 1/4NPT 1/2NPT

-------

-------

-------

-------

-------

E6A

MAL-M10X1RH

Conical pipe fitting

---

---

M10X1RH

---

---

---

---

---

E6B

MAL-M20x1,5RH

French Type

G.13

H.1

M20x1,5RH

---

---

---

---

---

E6D

MAL-M26x1,5RH

NTC type

---

---

M26x1,5RH

---

---

---

---

---

CODE

CONNECTION

DRAWING

TYPE

EN EN Inlet Outlet code code

H S C L (mm) (mm) (mm) (mm)

GASKET

E7A E7B E7C

MAL-1/4LH-DIN MAL-3/8LH-DIN MAL-1/2LH-DIN

German type

G.20 G.11 G.24

H.4 H.6 H.5

1/4LH-DIN 3/8LH-DIN 1/2LH-DIN

-------

-------

-------

-------

-------

F1B F1D

FEM-G1/4RH FEM-G1/2RH

ISO 228

-----

-----

G1/4RH-ISO228 G1/2RH-ISO228

-----

-----

-----

-----

-----

F2A F2B F2C F2D F2E F2F F3B F3C F3D F3E F3F F3J F5A F5B F5C F5D F5E F5F F5J

FEM-Rp1/8 FEM-Rp1/4 FEM-Rp3/8 FEM-Rp1/2 FEM-Rp3/4 FEM-Rp1 FEM-Rc1/4 FEM-Rc3/8 FEM-Rc1/2 FEM-Rc3/4 FEM-Rc1 FEM-Rc1.1/4 FEM-1/8NPT FEM-1/4NPT FEM-3/8NPT FEM-1/2NPT FEM-3/4NPT FEM-1NPT FEM-1.1/4NPT

BSP-ISO7-Cylindrical

G.14 G.14 G.14 G.14 G.14 G.14 G.23 G.23 G.23 G.23 G.23 G.23 G.18 G.18 G.18 G.18 G.18 G.18 G.18

H.7 H.7 H.7 H.7 H.7 H.7 H.56 H.56 H.56 H.56 H.56 H.56 H.11 H.11 H.11 H.11 H.11 H.11 H.11

Rp1/8-ISO7 Rp1/4-ISO7 Rp3/8-ISO7 Rp1/2-ISO7 Rp3/4-ISO7 Rp1-ISO7 Rc1/4-ISO7 Rc3/8-ISO7 Rc1/2-ISO7 Rc3/4-ISO7 Rc1-ISO7 Rc1.1/4-ISO7 1/8NPT 1/4NPT 3/8NPT 1/2NPT 3/4NPT 1NPT 1.1/4NPT

---------------------------------------

---------------------------------------

---------------------------------------

---------------------------------------

---------------------------------------

BSP-ISO7-Conical

NPT

F6D

FEM-M14x1,5RH

Small cylinder valve

---

---

M14x1,5

---

---

---

---

---

F6L

FEM-M24X1,5RH

Special

---

---

M24X1,5RH

---

---

---

---

---

K2B

PIPE-1/4-INV. FLARE

Inverted Flare

---

---

1/4

---

---

---

---

---

K3E

PIPE-12-CTS

Copper Tube

---

---

M20x1,5RH

---

23

---

---

NBR

K4C

PIPE-8-OG

Biconical compression fitting

---

---

8 mm

---

---

---

---

---

CODE

CONNECTION

DRAWING

TYPE

EN EN Inlet Outlet code code

H S C L (mm) (mm) (mm) (mm)

GASKET

L1A L2A

MAL-W20LH-UNI MAL-NF21,7LH

For cylinder valve Italian type

G.1 G.2

--H.17

W20LH-UNI NF21,7LH

-----

-----

-----

-----

-----

N1A

NUT-W20LH-25-UNI

For cylinder valve Italian type

---

---

W20x1/14L.H.

16

25

---

---

---

N1B

NUT-W20LH-25x13,5

For cylinder valve Italian type

---

---

W20x1/14L.H.

13,5

25

-------

-------

-------

N1C NUT-W20LH-25x13,5-G/G N1D NUT-W20LH-25x13,5-G/S

For cylinder valve Italian type

-----

-----

W20x1/14L.H.

13,5 13,5

25 25

-----

-----

NBR SALPA

N1E

NUT-W20LH-UNI-G/G

For cylinder valve Italian type

G.1

---

W20x1/14L.H.

16

25

---

---

NBR

N2A NUT-NF21,8LH-27x14-G/G N2B NUT-NF21,8LH-27x14-G/S

For cylinder valve French type

-----

-----

NF21,8x1/14L.H.

14 14

27 27

-----

-----

NBR SALPA

N2C

NUT-NF21,8LH-R5NF

For cylinder valve French type

G.2

---

NF21,8x1/14L.H.

13

---

32,5

---

NBR

N3A

NUT-M21,8LH-30,5BS

For cylinder valve UK Butane type

G.8

---

M21,8x1/14L.H.

17

30,5

---

---

NBR

N4B NUT-W21,8LH-R5DIN/KLF

For cylinder valve German type KLF

G.12

---

W21,8x1/14L.H.

18

---

32

---

---

N4D

NUT-W21,8LH-30x21KBI

For cylinder valve German Kombi type

G.5

---

W21,8x1/14L.H.

21

30

---

---

NBR

N4J NUT-W21,8LH-28x16,5CH N4K NUT-W21,8LH-27x17MSZ

For cylinder valve Swiss type For cylinder valve Hungarian type

-----

-----

W21,8x1/14L.H.

16,5 17

28 27

-----

-----

NBR NBR

N5E

NUT-G3/4RH

ISO 228

G.17

---

G3/4RH-ISO228

18

32

---

---

NBR

10

CODE

CONNECTION

DRAWING

TYPE

EN EN Inlet Outlet code code

H S C L (mm) (mm) (mm) (mm)

GASKET

N6A

NUT-M20x1,5RH

French Type

---

---

M20x1,5RH

14,5

23

---

---

NBR

P1A P2A

POLM-5/8LH-BS-HN POLM-USA-25x23,5-HN

POL UK hard nose POL USA hard nose

G.7 ---

-----

G5/8LH-ISO228 0,880-14NGO-L.H

-----

30 25

-----

28,5 23,5

-----

P2C

POLS-USA-R2-SN

POL USA soft nose

---

---

0,880-14NGO-L.H

---

---

---

24,5

NBR

P2D

POLS-USA-R6-SN

POL USA soft nose

---

---

0,880-14NGO-L.H

---

---

47

27

NBR

P5C

MAL-M14x1,5RH

For small cylinder type

---

---

M14x1,5RH

---

---

---

11

NBR

P5D

MAL-M16x1,5RH

For small cylinder type

G.3

---

M16x1,5RH

---

---

---

13,5

NBR

P7B POLM-DIN-24X28,5-HN

POL Germany hard nose

---

---

0,880-14NGO-L.H

---

24

---

28,5

---

Q9A

FEM-5/8-18 UNF

Conical pipe fitting

---

---

5/8-18 UNF

17,5

19

---

---

---

Z1D

HNZ-10-EN

Hose nozzle France-UK type

---

H.50

10 mm

---

---

---

23,5

---

Z1E

HNZ-10-UNI

Hose nozzle UNI

---

H.53

10 mm

---

---

---

29

---

Z2A

HNZ-13,5-DS

Conical hose nozzle

---

H.51

13,5 mm

---

---

---

23

---

Z9A

HNZ-11,7-MSZ

Hose nozzle Hungary type

---

---

11,7 mm

---

---

---

28,5

---

11

High pressure regulators


APR85 - APR85EFV - LPR85

Application

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These compact products with fixed pressure are used in applications up to 10 kg/h (475kBTU/hr) maximum. - They are intended to be used as: Single stage regulators for high pressure craft use (blowtorches, warm air heaters gas-fired...). First stage regulators in small domestic or commercial installations Limitors (LPR85) in the same type of installations, after a first stage regulator or an automatic changeover. - The APR85EFV are provided with an excess flow valve with manual reset, which cuts the gas flow in case of rupture of the hose, for example. - The LPR85-2E are limitors with two inlets provided with mounting bracket.

002007XX

Construction
Body and cover: die cast zinc alloy Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

APR85
002011AX

LPR85-2E
006760

APR85EFV
004740GA

Code

Inlet code F5B F2B F2B N2C F2B F2B N2C N1C N4D N4D P1A P1A P1A P1A N4D P1A N6A E6B

Inlet connection FEM-1/4NPT FEM-Rp1/4 FEM-Rp1/4 NUT-NF21,8LH-R5NF FEM-Rp1/4 FEM-Rp1/4 NUT-NF21,8LH-R5NF NUT-W20LH-25x13.5-G/G NUT-W21,8LH-30x21KBI NUT-W21,8LH-30x21KBI POLM-5/8LH-BS-HN POLM-5/8LH-BS-HN POLM-5/8LH-BS-HN POLM-5/8LH-BS-HN NUT-W21,8LH-30x21KBI POLM-5/8LH-BS-HN NUT-M20x1,5RH MAL-M20x1,5RH

Outlet code F5B F2B F2B E7B F2B E7B Z1D Z1D E7B E7B E1B F2B E1B Z1D E7B E7B E6B E6B

Outlet connection

Inlet pressure (Pe) bar psig 2,516 1,510 2,516 216 216 216 2,516 2,516 2,516 316 216 216 2,516 2,416 0,716 216 2,516 2,516 36230 22145 36230 29230 29230 29230 36230 36230 36230 43230 29230 29230 36230 35230 10230 29230 36230 36230

Outlet pressure (Pa) Flow rate (LPG) Filter bar psig kg/h kBTU/hr 1,5 0,5 1,5 1 1 1 1,5 1,5 1,5 2 1,5 1 2 1,4 0,5 1,5 1,75 1,75 22 7 22 14 14 14 22 22 22 29 22 14 29 20 7 22 25 25 8 8 8 8 8 8 8 8 8 8 5,5 8 6,5 8 3 8 8 8 380 380 380 380 380 380 380 380 380 380 260 380 310 380 140 380 380 380 Y Y Y Y Y Y Y Y Y -

APR85
002152PX 002007CB 002007XX 002048BA 002007C 002048B 002013CA 002011XZ 002045D 002048S 002032B 002032XZ 002032C 002011AX 004740GA 004740GB 002040XX 006760 FEM-1/4NPT FEM-Rp1/4 FEM-Rp1/4 MAL-3/8LH-DIN FEM-Rp1/4 MAL-3/8LH-DIN HNZ-10-EN HNZ-10-EN MAL-3/8LH-DIN MAL-3/8LH-DIN MAL-G1/4RH FEM-Rp1/4 MAL-G1/4RH HNZ-10-EN

APR85EFV
MAL-3/8LH-DIN MAL-3/8LH-DIN

LPR85
MAL-M20x1,5RH

LPR85-2E
MAL-M20x1,5RH

12

High pressure regulators


APR85R - APR8510 - APR8510EFV

Application
43 mm

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These variable pressure compact products are used in applications up to 8 kg/h (380 kBTU/hr) maximum. - They are intended to be used as single stage regulators for high pressure craft (blowtorches, warm air heaters, roofing...), agricultural (poultry, weed control, thermal weeding...) or commercial (restaurants...) use. - The APR85R pressure is adjusted by a multi-turn handwheel. The setting can be blocked using the locking nut. Certain models are equipped with a plug which can be replaced by a manometer. - The APR8510 pressure is adjustable on full rotation of the handwheel which is indexed for better control. - The APR8510EFV are provided with an excess flow valve with manual reset, which cuts the gas flow in case of rupture of the hose, for example.

14,5 mm

29 mm 58 mm

Construction
Body and cover: die cast zinc alloy Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

APR85R
002010XZ

APR8510EFV APR8510
002060XZ 004740AB

Code

Inlet code F5B F5B F5B F2B F2B F2B N2A N2A N1C P1A F5B F5B F2B P1A F2B F2B N2A N1D P1A P1A P1A P1A P1A N2C

Inlet connection FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-Rp1/4 FEM-Rp1/4 FEM-Rp1/4 NUT-NF21,8LH-27x14 NUT-NF21,8LH-27x14 NUT-W20LH-25x13.5-G/G POLM-5/8LH-BS-HN FEM-1/4NPT FEM-1/4NPT FEM-Rp1/4 POLM-5/8LH-BS-HN FEM-Rp1/4 FEM-Rp1/4 NUT-NF21,8LH-27x14-G/G NUT-W20LH-25x13.5-G/S POLM-5/8LH-BS-HN POLM-5/8LH-BS-HN POLM-5/8LH-BS-HN POLM-5/8LH-BS-HN POLM-5/8LH-BS-HN NUT-NF21,8LH-R5NF

Outlet code F5B F5B F5B F2B F2B F2B Z1D Z1D Z1D F2B F5B F5B F2B E7B E7B F2B E7B E7B E7B F2B F2B F2B E7B E7B

Outlet connection FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-Rp1/4 FEM-Rp1/4 FEM-Rp1/4 HNZ-10-EN HNZ-10-EN HNZ-10-EN FEM-Rp1/4 FEM-1/4NPT FEM-1/4NPT FEM-Rp1/4 POLM-5/8LH-BS-HN MAL-3/8LH-DIN FEM-Rp1/4 MAL-3/8LH-DIN MAL-3/8LH-DIN MAL-3/8LH-DIN FEM-Rp1/4 FEM-Rp1/4 FEM-Rp1/4 MAL-3/8LH-DIN MAL-3/8LH-DIN

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) bar psig (0)0,51,5 (0)0,51,5 (0)13 (0)13 (0)13 (0)13 (0)13 (0)13 (0)13 (0)14 0,41,5 0,54 0,41,5 0,52 0,52 0,54 0,52 0,52 0,351 0,352 0,54 0,351 1,53 1,53 (0)722 (0)722 (0)1444 (0)1444 (0)1444 (0)1444 (0)1444 (0)1444 (0)1444 (0)1458 622 758 622 729 729 758 729 729 514 529 758 514 2251 2251

Flow rate (LPG) kg/h kBTU/hr 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380

Manometer/Outlet (Connection -Type) PLUG 1/8NPT MANO-DRY G1/8 PLUG 1/8NPT MANO-DRY G1/8 PLUG G1/8 MANO-DRY G1/8 -

71 mm

002060XZ

Filter

APR85R
002150BX 002005N 002150AX 002000XZ 002005 002005AX 002012 002020B 002010XZ 002037XZ 002070CX 002050CX 002070XX 002058AA 002086B 002050XX 002086H 002095AA 002077XX 002055XZ 002056XZ 002077AA 004740AB 004740FD Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+110 Pa+116 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+7230 Pa+7230 Y Y Y Y Y Y Y Y Y Y Y Y

APR8510
Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+0,516 Pa+0,516

APR8510EFV
610 285475 610 285475

13

High pressure regulators


APO

Application
63 mm

54,3 mm

002100XZ

Construction
Body and cover: hot stamped brass Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

APO
002100XZ

APO
002110XZ

Code

Inlet code N2C N1D N1D

Inlet connection NUT-NF21,8LH-R5NF NUT-W20LH-25x13.5G/S NUT-W20LH-25x13.5G/S

Outlet code F2A Z1D Z1D

Outlet connection FEM-Rp1/8 HNZ-10-EN HNZ-10-EN

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) bar psig (0)13 (0)13 (0)13 (0)1444 (0)1444 (0)1444

Flow rate (LPG) kg/h kBTU/hr 610 610 610 285475 285475 285475

Manometer/Outlet (Connection -Type) MANO-DRY G1/8 PLUG G1/8 MANO-DRY G1/8

120-128 mm

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These extremely robust products with variable pressure are used in applications up to 10 kg/h (475 kBTU/hr) maximum - They are intended to be used as single stage regulators for high pressure craft (blowtorches, roofing, road works...), agricultural (thermal weeding...) or commercial (restaurants...) use. - Thanks to its robust design, this regulator can operate in harsh conditions.

Filter

AP0
002141BA 002100XZ 002110XZ Pa+116 Pa+116 Pa+116 Pa+14230 Pa+14230 Pa+14230 Y Y Y

14

High pressure regulators


APZ120 - LPZ120

Application
70mm

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These products with fixed pressure are used in applications up to 12 kg/h (570 kBTU/hr) maximum. - They are intended to be used as: First stage regulators for small domestic or commercial installations supplied with multi cylinders or a tank. Limitors (LPZ120) in the same type of installations, after a first stage regulator or an automatic changeover. Single stage regulators for high pressure craft use (blowtorches, warm air heaters gas-fired...). - They are equipped with a plug which can be replaced by a manometer. - The APZ120 regulator can be equipped, on request, with a safety relief valve. - Models equipped with diaphragm and pad made of FPM are recomended when gas may contain agressive components.

89 mm

29,5 mm 59 mm

002285

Construction
Body and cover: die cast zinc alloy Diaphragm: reinforced NBR or FPM (NBR-R or FPM-R) synthetic rubber Valve pad: FPM or NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

APZ120
002285

LPZ120
002288

Code

Inlet code F5B F5B F5B F3B N6A F5B F3B

Inlet connection FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-Rc1/4 NUT-M20x1,5RH FEM-1/4NPT FEM-Rc1/4

Outlet code F5B F5B F5B F3B E6B F5B F3B

Outlet connection FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-Rc1/4 MAL-M20x1,5RH FEM-1/4NPT FEM-Rc1/4

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) Flow rate (LPG) Manometer/Outlet PAD Diaphragm Filter material material bar psig kg/h kBTU/hr (Connection -Type) 0,5 1,5 1,5 1,5 1,7 1,7 1,7 7 22 22 22 25 25 25 8,5 12 12 12 12 12 12 400 570 570 570 570 570 570 PLUG G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 Y FPM FPM NBR NBR NBR FPM NBR FPM-R FPM-R NBR-R NBR-R NBR-R FPM-R NBR-R

APZ120
002281MX 002283MX 002283PX 002285 002288 002207MX 002207 1,516 2,516 2,516 2,516 2,516 2,516 2,516 22232 36230 36230 36230 36230 36230 36230

LPZ120

15

High pressure regulators


APZ120R - APZE

Application
70 mm

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These variable pressure products are used in applications up to 18 kg/h (850 kBTU/hr) maximum. - They are intended to be used as: Single stage regulators for craft (burners, road works...) and agricultural (poultry, weeding...) use. First stage regulators for small domestic or commercial installations - The APZE is particularly adapted to certain types of commercial installations (restaurants...) - Certain models are equipped with an internal limited flow safety relief valve (LRV). - Certain models are equipped with a dry manometer or with a plug for manometer. - Models equipped with diaphragm and pad made of FPM are recomended when gas may contain agressive components.

29,5 mm 59 mm

Construction
Body and cover: die cast zinc alloy Diaphragm: reinforced NBR or FPM (NBR-R or FPM-R) synthetic rubber Valve pad: FPM or NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

APZE APZ120R
002201 002211

APZ120R
002230

Code

Inlet code F3B F5B F5B F5B F5B F5B F3B F3B F3B F3B F3B N6A N1B N1B N1B N1B P1A N1B N1B

Inlet connection FEM-Rc1/4 FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-Rc1/4 FEM-Rc1/4 FEM-Rc1/4 FEM-Rc1/4 FEM-Rc1/4 NUT-M20x1,5RH NUT-W20LH-25x13.5 NUT-W20LH-25x13.5 NUT-W20LH-25x13.5 NUT-W20LH-25x13.5 POLM-5/8LH-BS-HN NUT-W20LH-25x13.5 NUT-W20LH-25x13.5

Outlet code F3B F5B F5B F5B F5B F5B F3B F3B F3B F2C F2C E6B F2C Z1D F3B Z1D E7B Z1D Z1D

Outlet connection FEM-Rc1/4 FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-Rc1/4 FEM-Rc1/4 FEM-Rc1/4 FEM-Rp3/8 FEM-Rp3/8 MAL-M20x1,5RH FEM-Rp3/8 HNZ-10-EN FEM-Rc1/4 HNZ-10-EN MAL-3/8LH-DIN HNZ-10-EN HNZ-10-EN

Inlet pressure (Pe) bar psig Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230

Outlet pressure (Pa) Type of Outlet pressure bar psig

Flow rate (LPG) kg/h kBTU/hr 1218 1218 1218 1218 1218 1218 1218 1218 1218 1218 1218 1218 1218 1218 1218 1218 1218 12 12 570850 570850 570850 570850 570850 570850 570850 570850 570850 570850 570850 570850 570850 570850 570850 570850 570850 570 570

PAD Diaphragm PRV Manometer/Outlet (type) (Connection -Type) Filter material material LRV LRV PLUG G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 PLUG G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-DRY G1/4 PLUG G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-DRY G1/4 Y Y Y Y Y Y Y Y NBR NBR NBR NBR FPM FPM NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR-R NBR-R NBR-R NBR-R FPM-R FPM-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R

APZ120R
002216AT 002217AX 002217AA 002217BX 002220MX 002221MX 002201 002200 002205 002209 002222 002293RX 002223 002210XZ 002230 002240 002201B 002211 002212 VAR-HWMT VAR-HWMT VAR-HWMT VAR-HWMT VAR-HWMT VAR-HWMT VAR-HWMT VAR-HWMT VAR-HWMT VAR-HWMT VAR-HWMT VAR-HWMT VAR-HEX VAR-HWMT VAR-HWMT VAR-HWMT VAR-HWMT (0)0,51,4 (0)0,52 (0)13 (0)13 (0)13 (0)13 (0)0,52 (0)13 (0)13 (0)13 (0)13 (0)13 (0)0,52 (0)13 (0)13 (0)13 (0)0,52 (0)13 (0)13 (0)720 (0)729 (0)1444 (0)1444 (0)1444 (0)1444 (0)729 (0)1444 (0)1444 (0)1444 (0)1444 (0)1444 (0)729 (0)1444 (0)1444 (0)1444 (0)729 (0)1444 (0)1444

APZE
VAR-HWMT VAR-HWMT

16

121 max mm

002201

High pressure regulators


APZ250 - APZ250R - LPZ250

Application
68 mm

- Mainly used for LPG, can also be used for NG, nitrogen and air - These fixed or variable pressure products are used in applications up to 50 kg/h (2400 kBTU/hr) maximum. - They are intended to be used as: First stage regulators (APZ250 and APZ250R) in domestic or commercial tank installations. Limitors (LPZ250) in the same type of installations, after a first stage regulator. - They can also be used in agricultural or industrial installations. - Certain models are equipped with an internal limited flow safety relief valve (LRV). - The internal construction of the safety relief valve allows a very precise setting of operating pressure. - Certain models are equipped with a dry manometer or with a plug for manometer.

29,7 mm

35,5 mm 71 mm

002307AB

Construction
Body and cover: die cast zinc alloy Diaphragm: reinforced NBR or FPM (NBR-R or FPM-R) synthetic rubber Valve pad: FPM or NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

APZ250
002307AB

APZ250R
002300AA

APZ250R
002311AD

Code

Inlet code F2B F2B F2B N1A N1A N1A F2B F2B N1A F2B F2B F2B F2B N6A N1A N1A F2B N6A

Inlet connection FEM-Rp1/4 FEM-Rp1/4 FEM-Rp1/4 NUT-W20LH-25-UNI NUT-W20LH-25-UNI NUT-W20LH-25-UNI FEM-Rp1/4 FEM-Rp1/4 NUT-W20LH-25-UNI FEM-Rp1/4 FEM-Rp1/4 FEM-Rp1/4 FEM-Rp1/4 NUT-M20x1,5RH NUT-W20LH-25-UNI NUT-W20LH-25-UNI FEM-Rp1/4 NUT-M20x1,5RH

Outlet code F2C F2C F2C F2C F2C F2C F2C F2C F2C F2C F2C F2C F2C E6B F2C F2C F2C E6B

Outlet connection FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 MAL-M20x1,5RH FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 MAL-M20x1,5RH

Inlet pressure (Pe) bar psig 216 216 216 216 216 216 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 216 216 29230 29230 29230 29230 29230 29230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 29230 29230

Outlet pressure (Pa) Flow rate (LPG) Type of Outlet pressure bar psig kg/h kBTU/hr

PRV Manometer/Outlet PAD Diaphragm (type) (Connection -Type) material material LRV LRV LRV LRV LRV PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-DRY G1/4 PLUG G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 PLUG G1/4 NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR FPM NBR NBR NBR NBR NBR FPM NBR NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R FPM-R NBR-R NBR-R NBR-R NBR-R NBR-R FPM-R NBR-R

APZ250
002313AA 002313AC 002307AB 002307AC 002307AD 002313AB 002311AC 002311AD 002311AE 002300AE 002300AH 002300AL 002311AA 002300AM 002300AA 002300AB 002313AE 002313AF FIX FIX FIX FIX FIX FIX VAR-HEX VAR-HEX VAR-HEX VAR-HEX VAR-HWMT VAR-HWMT VAR-HEX VAR-HEX VAR-HEX VAR-HEX FIX FIX 1,5 1,5 1,5 1,5 1,5 1,5 0,51,4 0,52 0,52 13 13 13 13 13 13 13 1,75 1,75 22 22 22 22 22 22 720 729 729 1444 1444 1444 1444 1444 1444 1444 25 25 30 30 30 30 30 30 2540 2540 2540 3050 3050 3050 3050 3050 3050 3050 30 30 1400 1400 1400 1400 1400 1400 11201900 11201900 11201900 14002400 14002400 14002400 14002400 14002400 14002400 14002400 1400 1400

APZ250R

LPZ250

17

80 mm

High pressure regulators


APZ400 - APZ400V - APZ400R - APZ400/OPSO

Application

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These fixed or variable pressure products are used in applications up to 80 kg/h (3800 kBTU/hr) maximum. - They are intended to be used as first stage regulators in domestic or commercial tank installations. - They can also be used in agricultural or industrial installations. - The APZ400V regulator is equipped with a vertical inlet for assembly on a tank with a vertical outlet valve. 002713AC - Certain models are equipped with an internal limited flow safety relief valve (LRV). - Certain models are equipped with a dry manometer or with a plug for a manometer. - The APZ400/OPSO regulators are equipped with a safety device protecting against overpressure.

002730AA

Construction
Body and cover: die cast zinc alloy Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

APZ400V
002730AA

APZ400
002713AC

APZ400/OPSO
002711AF

Code

Inlet code

Inlet connection

Outlet code F5C F2C F5C F2C F2C F2C F2C F2C F2C F5C F5C F2D F2C F2C F2C F2C F2C F3E F3E F2D

Outlet connection FEM-3/8NPT FEM-Rp3/8 FEM-3/8NPT FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-3/8NPT FEM-3/8NPT FEM-Rp1/2 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rc3/4 FEM-Rc3/4 FEM-Rp1/2

Inlet pressure (Pe) bar psig 1,516 1,516 216 216 1,516 216 1,2516 216 216 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 Pa+0,516 1,2516 1,2516 1,2516 22230 22230 29230 29230 22230 29230 19230 29230 29230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 Pa+7230 19230 19230 19230

Outlet pressure (Pa) bar psig 1 0,5 1,5 1,5 1 1,5 0,75 1,5 1,5 0,52 13 13 0,52 0,52 13 0,52 0,52 0,75(0,52) 0,75(0,52) 0,75(0,52) 14 7 22 22 14 22 11 22 22 729 1444 1444 729 729 1444 729 729 11(729) 11(729) 11(729)

Kg/h 40 30 40 40 40 40 40 40 40 3060 4080 4080 3060 3060 4080 3060 3060 40 40 40

Flow rate (LPG) kBTU/hr 1900 1400 1900 1900 1900 1900 1900 1900 1900 14002850 19003800 19003800 14002850 14002850 19003800 14002850 14002850 1900 1900 1900

PRV type LRV LRV LRV LRV LRV LRV LRV -

Manometer/Outlet (Connection -Type) PLUG G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-DRY G1/8 MANO-DRY G1/8 -

APZ400
002713AC 002707AC 002713AB 002707AB 002713AD 002707AD 002713AE 002730AA 002730AB F5B FEM-1/4NPT N1A NUT-W20LH-25-UNI F5B FEM-1/4NPT N1A NUT-W20LH-25-UNI P2F POLM-USA-28x28,5-HN N1A NUT-W20LH-25-UNI P2F POLM-USA-28x28,5-HN N5E N5E NUT-G3/4RH NUT-G3/4RH FEM-1/4NPT FEM-1/4NPT FEM-Rp1/2 FEM-Rp1/4 FEM-Rp1/4 FEM-Rp1/4 NUT-W20LH-25-UNI POLM-USA-25x23,5-HN FEM-Rp1/2 MAL-3/4NPT FEM-Rp1/4

APZ400V APZ400R
002700AF F5B 002700AH F5B 002700AM F2D 002700AB F2B 002711AF F2B 002700AD F2B 002711AE N1A 002700AP P2A 006861MA 006861MC 006865AE F2D E5E F2B

APZ400/OPSO

18

High pressure regulators


AP40 - AP40V - AP40R - LP40 - AP40/OPSO

Application
82 mm

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These fixed or variable pressure products are used in applications up to 40 kg/h (1900 kBTU/hr) maximum. - They are intended to be used as: First stage regulators (AP40, AP40V and AP40R) in domestic or commercial tank installations. Limitors (LP40) in the same type of installations. - They can also be used in agricultural or industrial installations. - These robust products made in aluminium alloy are recommanded when resistance to high temperature is requested. - Certain models are equipped with a dry manometer or with a plug for a manometer. - The AP40V regulator is equipped with a vertical inlet for assembly on a tank with a vertical gas valve. - Certain models are equipped with a limited flow safety relief valve. - The AP40/OPSO regulators are equipped with a safety device protecting against overpressure.

106,5 mm

002820

Construction
Body and cover: die cast aluminium alloy Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

AP40R AP40
002820 002800

AP40/OPSO
006863

Code

Inlet code F3B F3B N6A N1A N1A P7B N5E N5E F3B F3B F3B F3B N6A N1A N1A P2A F3B N6A

Inlet connection FEM-Rc1/4 FEM-Rc1/4 NUT-M20x1,5RH NUT-W20LH-25-UNI NUT-W20LH-25-UNI POLM-DIN-24X28,5-HN NUT-G3/4RH NUT-G3/4RH FEM-Rc1/4 FEM-Rc1/4 FEM-Rc1/4 FEM-Rc1/4 NUT-M20x1,5RH NUT-W20LH-25-UNI NUT-W20LH-25-UNI POLM-USA-25x23,5-HN FEM-Rc1/4 NUT-M20x1,5RH FEM-Rp1/4 NUT-W20LH-25-UNI POLM-USA-25x23,5-HN

Outlet code F2C F2C E6B F2C F2C F2C F2C E2D F2C F2C F2C F2C E6B F2C F2C F2D F2C E6B F2D F2C F2D

Outlet connection FEM-Rp3/8 FEM-Rp3/8 MAL-M20x1,5RH FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 MAL-R1/2 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 MAL-M20x1,5RH FEM-Rp3/8 FEM-Rp3/8 FEM-Rp1/2 FEM-Rp3/8 MAL-M20x1,5RH FEM-Rp1/2 FEM-Rp3/8 FEM-Rp1/2

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) bar psig 0,75 1,5 0,8 1,5 1,5 0,8 1,5 1,5 (0)0,51,8 (0)0,51,8 (0)13 (0)13 (0)13 (0)0,51,8 (0)13 (0)0,52 1,7 1,7 0,75 0,5 0,75 11 22 12 22 22 12 22 22 (0)726 (0)726 (0)1444 (0)1444 (0)1444 (0)726 (0)1444 (0)729 25 25 11 7 11

Flow rate (LPG) PRV kg/h kBTU/hr (type) 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 25 1900 1900 1900 1900 1900 1900 1900 1900 1900 1900 1900 1900 1900 1900 1900 1900 1900 1900 1900 1900 1200 LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV

Manometer/Outlet (Connection -Type) PLUG G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-DRY G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 MANO-DRY G1/8 -

AP40
002833 002802 002842 002820 002821 002851 002855AB 002855M 002801 002811 002800 002810 002843 002834 002836 002838PL 002805 002841 1,516 2,516 1,516 2,516 2,516 1,816 22230 36230 22230 36230 36230 26230 36230 36230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 36230 36230 22230 22230 22230

AP40V
2,516 2,516

AP40R
Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 Pa+116

LP40
2,516 2,516

AP40/OPSO
006864 F2B 006861BM N1A 006863 P2A 1,516 1,516 1,516

19

104 mm

High pressure regulators


APS1000 - APS1000R - LPS1000 - APS1000/OPSO

Application

- Used for LPG, NG, nitrogen and air. - These fixed and variable pressure products are used in applications up to 120 kg/h (5700 kBTU/hr) maximum. - They are intended to be mainly used as: First stage regulators (APS1000-APS1000R) in commercial, industrial or agricultural installations and also in networked LPG installations. Limitors (LPS1000) in the same type of installations after the first stage. The vent hole can be connected to a 6mm diameter tube. - Certain models are equipped with a pressure gauge, in the inlet, the outlet or both. - Manometers are either dry or oiled filled. - They can be equipped with an external safety relief valve. - The 002512AR model is specialy designed for natural gas. - The APS1000/OPSO regulators are equipped with a safety device protecting against overpressure.

002500

Construction
Body and cover: die cast aluminium alloy Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

APS1000
002506

APS1000R
002500

APS1000/OPSO
006869CB

Code

Inlet code F3E F5E F3E F3E F3E F3E F3E F3E E5E F2D

Inlet connection FEM-Rc3/4 FEM-3/4NPT FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 MAL-3/4NPT FEM-Rp1/2

Outlet Outlet code connection F3E F5E F3E F3E F3E F3E F3E F3E F3E F3E FEM-Rc3/4 FEM-3/4NPT FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4

Inlet pressure (Pe) bar psig 2,516bar 36230psig Pa+116 Pa+116 Pa+116 Pa+116 Pa+116 2,516 2,516 2,516 2,516 Pa+14230 Pa+14230 Pa+14230 Pa+14230 Pa+14230 36230 36230 36230 36230

Outlet pressure (Pa) bar psig

kg/h 100 80120 80120 80120 80120 80120 100 100 68 68

Flow rate kBTU/hr 4750 38005700 38005700 38005700 38005700 38005700 4750 4750 3200 3200

MANOMETER/INLET (Connection -Type) PLUG G1/4 PLUG 1/4NPS PLUG G1/4 PLUG G1/4 MANO-DRY G1/4 MANO-OIL G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4 PLUG G1/4

MANOMETER/OUTLET (Connection -Type) PLUG G1/4 PLUG 1/4NPS PLUG G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-OIL G1/4 PLUG G1/4 PLUG G1/4 MANO-DRY G1/8 MANO-DRY G1/8

APS1000
002506 002500BX 002500 002510 002530 002540 002512CB 002505 006869CB 006869CC 1,5bar 22psig (0)1444 (0)1444 (0)1444 (0)1444 (0)1444 1429 25

APS1000R
(0)13 (0)13 (0)13 (0)13 (0)13 12 1,75

LPS1000 APS1000/OPSO
1,5(12) (22)1429 1,5(12) (22)1429

20

High pressure automatic changeovers


155 - 165 - 2165

Application
160 mm

- These first stage automatic changeovers are used with 2 LPG cylinders or 2 batteries of LPG cylinders. - These product are used in domestic and commercial applications up to 20kg/h (950kBTU/hr). - They also provide the first stage regulation function and must be used together with a second stage regulator. - They are equipped with a built-in empty service cylinder indicator. Certain models are supplied with a complementary remote indicator Magiscope (to be installed on the downstream line). - All products are equipped with integral non return valves (in the inlet connections), to avoid any leakage during the cylinder change. - All products are equipped with a filter in the inlet connections. - The 2165 models integrate a limitor which maintains the outlet pressures at a safe level in case of failure of the first stage regulation function. - Most of the products are equipped with a plastic mounting plate which includes the instructions of use.

75 mm

158 mm

31 mm

0165C12

Construction
Body and cover: die cast zinc alloy Handwheel: reinforced polyamide Wall bracket: ABS Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

2165C 165
0165C12 2165C00

Code

Inlet code E6B E6B E6B E6B E6B E6B F5B F1B E6B F5B E6B F1B K2B K3E E6B E6B

Inlet connection MAL-M20x1,5RH MAL-M20x1,5RH MAL-M20x1,5RH MAL-M20x1,5RH MAL-M20x1,5RH MAL-M20x1,5RH FEM-1/4NPT FEM-G1/4RH MAL-M20x1,5RH FEM-1/4NPT MAL-M20x1,5RH FEM-G1/4RH PIPE-1/4-INV. FLARE PIPE-12-CTS MAL-M20x1,5RH MAL-M20x1,5RH

Outlet code K3E E6B E6B K3E E6B E6B F5D F1D K3E F5D E6B F1B F5D K3E E6B E6B

Outlet connection PIPE-12-CTS MAL-M20x1,5RH MAL-M20x1,5RH PIPE-12-CTS MAL-M20x1,5RH MAL-M20x1,5RH FEM-1/2NPT FEM-G1/2RH PIPE-12-CTS FEM-1/2NPT MAL-M20x1,5RH FEM-G1/4RH FEM-1/2NPT PIPE-12-CTS MAL-M20x1,5RH MAL-M20x1,5RH

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) bar psig 1,50,8 1,50,8 1,50,8 0,50,3 0,50,3 32 32 32 1,50,8 1,20,6 1,50,8 1,20,6 10,5 1,50,8 1,50,8 1,50,8 2212 2212 2212 74 74 4429 4429 4429 2212 179 2212 179 147 2212 2212 2212

Flow rate (LPG) kg/h kBTU/hr 6 6 6 2,6 6 20 20 20 10 10 10 10 10 8 8 8 285 285 285 125 285 950 950 950 475 475 475 475 475 380 380 380

Accessories

155C
0155C00 0155C02 0155C20 0165B00 0165BS2 0165CS1 0165CS4 0165CS5 0165C00 0165C01 0165C02 0165C12 0165C13 2165C00 2165C01 2165C05 220 220 220 0,47,5 0,812,5 420 420 420 220 1,720 220 1,720 217 220 220 220 29290 29290 29290 6110 12180 58290 58290 58290 29290 25290 29290 25290 29250 29290 29290 29290 MAGISCOPE P95 MAGISCOPE P95 No plastic plate

165B - 165BS - 165CS - 165C

No plastic plate

2165C
MAGISCOPE P95 MAGISCOPE P95 -

21

70 mm

High pressure automatic changeovers


ACH2600

Application

- These first stage automatic changeovers are used with 2 LPG cylinders or 2 batteries of LPG cylinders. - These products are used in domestic or commercial applications up to 10 kg/h (475 kBTU/hr). - Certain models are equipped with a visual indicator VIS to show empty cylinder. - Certain models are equipped with a plug which allows a visual indicator to be mounted later on. - All these automatic changeovers are equipped with non return valves in the inlet connections to avoid any leakage during the cylinder change. - All products are equipped with a filter in the inlet connections. - All products are equipped with a metal mounting bracket.

Construction
Body and cover: die cast aluminium alloy Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber

002600

Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

ACH2600
002600

ACH2600
002603

Code

Inlet code L1A E6B L1A L1A E6B E6B

Inlet connection MAL-W20LH-UNI MAL-M20x1,5RH MAL-W20LH-UNI MAL-W20LH-UNI MAL-M20x1,5RH MAL-M20x1,5RH

Outlet code L1A E6B L1A L1A E6B E6B

Outlet connection MAL-W20LH-UNI MAL-M20x1,5RH MAL-W20LH-UNI MAL-W20LH-UNI MAL-M20x1,5RH MAL-M20x1,5RH

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) bar psig 1,50,8 1,50,8 1,50,8 10,6 1,50,8 1,50,8 2212 2212 2212 149 2212 2212

Flow rate (LPG) kg/h kBTU/hr 10 10 10 10 10 10 475 475 475 475 475 475

Indicator

ACH2600
002600 002601 002602 002602P 002603 002603M 2,516 2,516 2,516 216 2,516 2,516 36230 36230 36230 29230 36230 36230 VIS VIS VIS VIS

22

High pressure automatic changeovers


126 - 126CS

Application

175 mm

99 mm

52 mm

Construction
Body and cover: brass Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

126
0126002

Code

Inlet code E1E E1E E1E

Inlet connection MAL-G3/4RH MAL-G3/4RH MAL-G3/4RH

Outlet code E1E E1E E1E

Outlet connection MAL-G3/4RH MAL-G3/4RH MAL-G3/4RH

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) bar psig 1,50,8 1,20,6 32 2212 179 4429

Flow rate (LPG) kg/h kBTU/hr 50 50 50 2400 2400 2400

126
0126002 0126003 0126CS2 216 1,720 416 29230 25290 MAGISCOPE P96 MANO S/R MANO S/R Y Y Y Y Y

126CS
58230

23

PA RO N

- These first stage automatic changeovers are used with 2 batteries of LPG cylinders or 2 LPG tanks. - These products are used in industrial or commercial applications up to 50 kg/h (2400 kBTU/hr). - These extremely robust products made of brass can be used in the most heavy duty applications. - They are equipped with a visual indicator to show empty vessel. - Certain models are equipped with a remote indicator (to be installed on the downstream line). - Certain models are equipped with an internal non return valve (NRV) in the inlet connections to avoid any leakage whilst cylinders are changed.

23 mm

85 mm

PA RO N

98 mm

0126002

126CS
0126CS2

MANOMETER/OUTLET (Connection -Type)

Filter

133 mm

E
P

NRV

Low pressure regulators


BP1803

Application

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These products with fixed or adjustable pressure are used in applications up to 5 kg/h (240 kBTU/hr) maximum. - They are intended to be used as: Single stage regulators in domestic or commercial installations. Second stage regulators in the same type of installations. - Models with inlet connections for cylinder valves are equipped with a filter. - Models equipped with diaphragm and pad made of FPM are recommended when gas may countain agressive components.
001820AC

Construction
Body and cover: die cast zinc alloy Diaphragm: reinforced NBR (NBR-R) or NBR or FPM synthetic rubber Valve pad: NBR or FPM synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +120F / +50C

BP1803
001820AC

BP1803
001821AN

Code

Inlet code
N3A F2B F5B N1B N1B N2A F2B F2B P1A F5B N6A F2B F5B N6A F5B F5B F5B F5B F5B N6A N6A

Inlet connection
NUT-M21,8LH-30,5BS FEM-Rp1/4 FEM-1/4NPT NUT-W20LH-25x13,5 NUT-W20LH-25x13,5 NUT-NF21,8LH-27x14-G/G FEM-Rp1/4 FEM-Rp1/4 POLM-5/8LH-BS-HN FEM-1/4NPT NUT-M20x1,5RH FEM-Rp1/4 FEM-1/4NPT NUT-M20x1,5RH FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT NUT-M20x1,5RH NUT-M20x1,5RH

Outlet code
F2C F2C F5C F2C Z1D Z1D F2C F2C F2C F5B E6B F2C F5B E6B F5B F5B F5B F5B F5B E6B E6B

Outlet connection

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) mbar ''wc


29 30 30 30 30 30 30(2070) 37 37 37 37 50 50 50 67 100 150 200 300 400 800 11 12 12 12 12 12 12(828) 15 15 15 15 20 20 20 26 40 60 80 120 160 315

Flow rate (LPG) Filter kg/h kBTU/hr


4 4 4 4 4 4 4 5 5 5 5 4 4 4 5 5 5 5 5 4 4 190 190 190 190 190 190 190 240 240 240 240 190 190 190 240 240 240 240 240 190 190 Y Y Y Y Y Y Y Y Y

PAD Diaphragm material material


NBR NBR NBR NBR NBR NBR NBR NBR NBR FPM NBR NBR FPM NBR FPM FPM FPM FPM FPM NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR FPM NBR NBR FPM NBR FPM NBR-R NBR-R NBR-R NBR-R NBR-R NBR-R

BP1803
001820AD 001820AC 001820AA 001820AG 001820AH 001820AE 001823AB 001821AG 001821AN 001821AA 001821AL 001823AC 001823AA 001823AD 001821AB 001821AC 001821AD 001821AE 001821AF 001821AM 001821AP FEM-Rp3/8 FEM-Rp3/8 FEM-3/8NPT FEM-Rp3/8 HNZ-10-EN HNZ-10-EN FEM-Rp3/8 FEM-Rp3/8 FEM-Rp3/8 FEM-1/4NPT MAL-M20x1,5RH FEM-Rp3/8 FEM-1/4NPT MAL-M20x1,5RH FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT FEM-1/4NPT MAL-M20x1,5RH MAL-M20x1,5RH 0,37,5 max 16 max 16 max 16 max 16 max 16 116 116 116 0,54 0,54 116 0,54 0,54 0,54 0,54 0,54 0,54 0,54 0,94 1,34 4110 max 230 max 230 max 230 max 230 max 230 14230 14230 14230 758 758 14230 758 758 758 758 758 758 758 1358 1958

24

Low pressure regulators


BP1813

Application

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These products with variable pressure are used in applications up to 4 kg/h (190 kBTU/hr) maximum. - They are intended to be mainly used as single or second stage regulator for agricultural (poultry heating), industrial or craft (radiant panels, air heaters) use. - The BP1813 pressure is adjustable on full rotation of the handweel which is indexed for better control.

000780AC

Construction
Body and cover: die cast zinc alloy Diaphragm: NBR or reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +120F / +50C

BP1813
000780AC

BP1813
000780AR

Code

Inlet code
F2B N6A F2B F2B F5B P1A F2B F2B F5B N1B N2A N2A N6A P1A P2A F2B P2C

Inlet connection
FEM-Rp1/4 NUT-M20x1,5RH FEM-Rp1/4 FEM-Rp1/4 FEM-1/4NPT POLM-5/8LH-BS-HN FEM-Rp1/4 FEM-Rp1/4 FEM-1/4NPT NUT-W20LH-25x13,5 NUT-NF21,8LH-27x14-G/G NUT-NF21,8LH-27x14-G/G NUT-M20x1,5RH POLM-5/8LH-BS-HN POLM-USA-25x23,5-HN FEM-Rp1/4 POLS-USA-R2-SN

Outlet code
F2C E6B F2C F2C F5C Z1D F2C F2C F5C F2C F2C E6B E6B Z1D F2C F2C Z1D

Outlet connection

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) mbar ''wc


5200 5200 5300 20300 20300 20300 2090 50150 50150 50150 50150 50150 50150 50150 50150 50200 50200 280 280 2-120 8120 8120 8120 835 2060 2060 2060 2060 2060 2060 2060 2080 2080 2080

Flow rate (LPG) Filter kg/h kBTU/hr


4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 Y Y Y Y Y Y Y Y Y

PAD Diaphragm material material


NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR-R NBR-R NBR-R NBR-R NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR

BP1813
000780AD 000780AL 000780AH 000780AG 000780AB 000780AR 000780AC 000780AE 000780AA 000780AQ 000780AN 000780AP 000780AM 000780AS 000780AT 000780AF 000780AV FEM-Rp3/8 MAL-M20x1,5RH FEM-Rp3/8 FEM-Rp3/8 FEM-3/8NPT HNZ-10-EN FEM-Rp3/8 FEM-Rp3/8 FEM-3/8NPT FEM-Rp3/8 FEM-Rp3/8 MAL-M20x1,5RH MAL-M20x1,5RH HNZ-10-EN FEM-Rp3/8 FEM-Rp3/8 HNZ-10-EN 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 14230 14230 14230 14230 14230 14230 14230 14230 14230 14230 14230 14230 14230 14230 14230 14230 14230

25

Low pressure regulators


MPB15 RPBS 37/22

Application
- This System is particularly dedicated to the canalized installations with individual metering. - It allows to switch from propane to natural gas without changing the regulators. - These products are used in domestic or commercial applications up to 4 kg/h (190 kBTU/hr) of LPG or 4 (n)m3/h (140 SCFH) of NG.

MPB15
- This second stage regulator is installed upstream from the meter. It has an integral OPSO (Over Pressure Shut Off) safety device to protect the meter. The OPSO is set at 300 mbar.

77 mm

Construction
Body and cover: Integral opso: die cast aluminium alloy Regulator: die cast zinc alloy. Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber

203 mm

Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

004660XX

Code

Inlet code

Inlet connection NUT-M20x1,5RH

Outlet code E6B

Outlet connection MAL-M20x1,5RH

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) mbar psig 150 2

Flow rate (LPG) Type kg/h (or (n)m3/h kBTU/hr or SCFH of gas 4kg/h 4(n)m3/h 190kBTU/hr 140 SCFH Prop. NG

OPSO

MPB15
004660XX N6A 15 1472 300mbar Y

RPBS 37/22
This third stage regulator is designed to be installed upstream from the appliance. It has 3 special features: - Low pressure regulator designed to provide 37 mbar for LPG or 22 mbar for Natural gas. - To switch the pressure from 37 to 22mbar, you only need to remove the special part integrated in the cap. - Integral turn shut off valve - UPSO (Under Pressure Shut Off) safety device which cuts off the gas flow in case of disconnection or breakage of the hose or in case of lack of gas pressure.
116,5 mm

Construction
Body and cover: die cast zinc alloy Plastic cover and handweel: polyamide Diaphragm: NBR synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

6455600

Code

Inlet code E6B

Inlet connection MAL-M20x1,5RH

Outlet code E6B

Outlet connection MAL-M20x1,5RH

Inlet pressure (Pe) bar psig 0,10,4 1,5 5,8

Outlet pressure (Pa) mbar ''wc 37 22 15 9

Flow rate (LPG) Type kg/h (or (n)m3/h kBTU/hr or SCFH of gas 4kg/h 4(n)m3/h 190kBTU/hr 140 SCFH Prop. NG

79 mm

OPSO

RPBS37/22
6455600 -

26

60 mm

Filter

Filter

Low pressure regulators


BP2202FV

Application

98,5 mm

- Mainly used for NG and LPG, can also be used for nitrogen and air. - These products with adjustable pressure are used in installations of: Natural gas up to 15 (n)m3/h (530SCFH) maximum, LPG up to 12 kg/h (570 kBTU/hr) - They are intended to be used as: Second stage regulator for LPG First and single or second stage for NG. - They are all equipped with a full relief valve which ensures that the outlet pressure cannot exceed 140 mbar (2 psig) in the event of malfunction or if something breaks. - On certain models, the vent hole can be connected to a tube. - On all products the outlet pressure is adjustable internaly after unscrewing the cap. The cap is sealable. - On most of the products the cap is sealable. - Certain products are equipped with a filter.

86 mm

143 mm

000815BH

Construction
Body and cover: die cast aluminium alloy Diaphragm: NBR or reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

BP2202FV
000815BH

BP2202FV
000815AD

Code

Inlet code F5B F5E F5D F5D E6D F5D F5D F2D F5B F5E F5E F5E E6D E6D

Inlet connection FEM-1/4NPT FEM-3/4NPT FEM-1/2NPT FEM-1/2NPT MAL-M26X1,5RH FEM-1/2NPT FEM-1/2NPT FEM-Rp1/2 FEM-1/4NPT FEM-3/4NPT FEM-3/4NPT FEM-3/4NPT MAL-M26X1,5RH MAL-M26X1,5RH

Outlet code F5D F5D F5D F5D F5D F5D F5D F2D F5D F5E F5E F5E F5D F5D

Outlet connection FEM-1/2NPT FEM-3/4NPT FEM-1/2NPT FEM-1/2NPT FEM-1/2NPT FEM-1/2NPT FEM-1/2NPT FEM-Rp1/2 FEM-1/2NPT FEM-3/4NPT FEM-3/4NPT FEM-3/4NPT FEM-1/2NPT FEM-1/2NPT

Inlet pressure (Pe) bar psig 1,717,2 14 0,210,3 1,44 1,74 0,210,3 1,44 14 0,74 0,21 1,74 1,74 1,74 1,74 25250 1458 34 2058 2558 34 2058 1458 1058 314 2558 2558 2558 2558

Outlet pressure (Pa) mbar psig -''wc

Flow rate (LPG) Kg/h or (n)m3/h SCFH or kBTU/hr 17kg/h 10(n)m3/h 3,2(n)m3/h 3,2(n)m3/h 4(n)m3/h 5,2(n)m3/h 5,2(n)m3/h 4(n)m3/h 4(n)m3/h 5(n)m3/h 15(n)m3/h 10(n)m3/h 6(n)m3/h 3,5(n)m3/h 800kBTU/hr 353SCFH 110SCFH 110SCFH 140SCFH 182SCFH 182SCFH 140SCFH 140SCFH 175SCFH 530SCFH 353SCFH 210SCFH 125SCFH

Type Vent Filter of gas (Position-Connection) LPG NG NG NG NG NG NG NG NG NG NG NG NG NG 6h-NC 6h-NC 6h-NC 6h-NC 6h-NC 6h-NC 6h-NC 6h-NC 6h-NC 6h-NC 6h-NC 6h-NC 6h-NC 6h-NC Y Y Y Y Y Y Y Y Y Y Y Y Y

Diaphragm material NBR-R NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR

BP2202FV
000815EB 000815AR 000815CA 000815CB 000815AD 000815AG 000815BH 000815BR 000816AB 000815MA 000815AM 000815AF 000815AC 000815AE 700(350850) 22(1823) 100(90110) 100(90110) 21(1926) 23(1823) 23(1826) 22(1823) 17,5(1623) 19(1823) 21(1626) 21(1926) 21(1623) 98(70115) 10(512)psig 8,8(6,410,4)''wc 1,5(1,31,6)psig 1,5(1,31,6)psig 8,4,(7,810,4)''wc 9,2(7,29,2)''wc 9,2(7,210,4)''wc 8,8(6,410,4)''wc 7(69)''wc 7,6(7,29,2)''wc 8,4(6,410,4)''wc 8,4(7,810,4)''wc 8,4(6,49,2)''wc 1,4(11,6)psig

27

Low pressure regulators


BP2205

Application

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These products with adjustable pressure are used in applications up to 10 kg/h (475 kBTU/hr) maximum. - They are intended to be used as: Second stage regulators in domestic or commercial installations (tanks or cylinders) Single stage regulators in domestic or commercial installations (cylinders) - The BP2205-G regulators are provided with a rotating special device called GIRO which protects the vent and allows the regulator to be installed in all positions. - The vent can be positionned after installation. - Certain models are equipped with an internal relief valve (LRV).

000860

Construction
Body and cover: die cast zinc alloy Diaphragm: NBR or reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR or FPM synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

BP2205 GIRO
000860ZX

BP2205
000880BS

Code

Inlet code F5B F3B F3B F2D F2D F2D N1A F5B F3B N1A F3B P1A P1A F3B

Inlet connection FEM-1/4NPT FEM-Rc1/4 FEM-Rc1/4 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 NUT-W20LH-25-UNI FEM-1/4NPT FEM-Rc1/4 NUT-W20LH-25-UNI FEM-Rc1/4 POLM-5/8LH-BS-HN POLM-5/8LH-BS-HN FEM-Rc1/4

Outlet code F5D F2D F2D F2D F2D F2D F2D F5D F2D F2D F2D F2D F2D F2D

Outlet connection FEM-1/2NPT FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-1/2NPT FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) mbar wc 30(2545) 30(2545) 37(3345) 30(2545) 30(2545) 37(3345) 30(2545) 37(3345) 30(2545) 30(2545) 37(3345) 37(3345) 37 37 12(1018) 12(1018) 15(1318) 12(1018) 12(1018) 15(1318) 12(1018) 15(1318) 12(1018) 12(1018) 15(1318) 15(1318) 15 15

Flow rate (LPG) PRV Vent kg/h kBTU/hr (type) (Position-Connection) 10 10 10 10 10 10 10 10 10 10 4 4 5 5 475 475 475 475 475 475 475 475 475 475 190 190 240 240 LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV 0h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 GIRO tube 6 0h-tube 6 0h-tube 6 GIRO tube 6 GIRO tube 6 GIRO tube 6 DH-NC DH-NC DH-NC DH-NC

PAD Diaphragm material material NBR FPM NBR NBR NBR NBR NBR FPM NBR NBR NBR NBR FPM FPM NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR-R NBR-R NBR NBR

BP2205
000876AX 000860 000862 000861 000861ZX 000868 000865 000860AA 000860ZX 000865ZX 000880AB 000880BS 000880AE 000880AF 0,54 0,54 0,54 0,54 0,54 0,82,5 0,57,5 0,54 0,54 0,57,5 116 116 116 116 758 758 758 758 758 1236 7110

BP2205-G
758 758 7110

BP2205-C
14230 14230

BP2205-CR
14230 14230

28

Low pressure regulators


BP2210 - BP2210/OPSO

Application

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These products with fixed or adjustable outlet pressure are used in applications up to 12 kg/h (570 kBTU/hr) maximum. - They are intended to be used as: Second stage regulators in domestic or commercial installations (tanks or cylinders). Single stage regulators in domestic or commercial installations (cylinders). - The vent hole can be connected with a tube. - Certain models integrate an UPSO (Under Pressure Shut Off) safety device.
000900

Construction
Body and cover: die cast aluminium alloy Diaphragm: NBR or reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR or FPM synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C
105 mm 112,5 mm 143 mm 16 mm 197 mm 116,5 mm

BP2210
000900

006825

BP2210/OPSO
006825

Code

Inlet code

Inlet connection

Outlet code F2D F5D E6B F2D F2D F2D F2D F2D E6B E6B F2D E6B F2D F2D F2D F3E

Outlet connection FEM-Rp1/2 FEM-1/2NPT MAL-M20x1,5RH FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 MAL-M20x1,5 MAL-M20x1,5 FEM-Rp1/2 MAL-M20x1,5 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rc3/4

Inlet pressure (Pe) bar psig 0,52 0,54 0,51,75 0,54 0,52 0,511 0,511 0,57,5 0,54 0,54 0,54 0,51,75 0,54 0,54 0,64 0,64 729 758 725 758 729 7160 7160 7110 758 758 758 725 758 758 858 858

Outlet pressure (Pa) mbar ''wc

Flow rate (LPG) Kg/h kBTU/hr 10 10 10 12 10 12 12 12 12 12 12 10 12 10 10 10 475 475 475 570 475 570 570 570 570 570 570 475 570 475 475 475

PRV Vent PAD Diaphragm UPSO FILTER material material (type) (Position-Connection) LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV 6h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 0h-tube 6 6h-tube 6 8h-tube 6 Y Y Y Y Y Y Y Y Y Y NBR NBR NBR NBR NBR FPM FPM NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR

BP2210
000980AB 000978AX 000982C2 000900 000980 000918MX 000917MX 000950 000974 000975 000930 000982 006820 006825 006826AA 006826AB F3B FEM-Rc1/4 F5B FEM-1/4NPT N6A NUT-M20x1,5RH F3B FEM-Rc1/4 F3B FEM-Rc1/4 F5B FEM-1/4NPT F5B FEM-1/4NPT F2D FEM-Rp1/2 N6A NUT-M20x1,5RH N6A NUT-M20x1,5RH N1A NUT-W20LH-25-UNI N6A NUT-M20x1,5RH F2D F2D F2D F2D FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 30(2545) 30(2545) 148 30(2545) 30(2545) 37(3345) 67(40100) 30(2545) 37(3345) 50(40100) 30(2545) 37(3345) 30(2545) 30(2545) 37 37 12(1018) 12(1018) 2 psig 12(1018) 12(1018) 15(1318) 27(1640) 12(1018) 15(1318) 20(1640) 12(1018) 15(1318) 12(1018) 12(1018) 15 15

BP2210/OPSO
NBR NBR NBR NBR NBR NBR-R NBR NBR-R

29

Low pressure regulators


BP2303 - BP2303R - BP2303/OPSO

Application

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These products with adjustable or variable outlet pressure are used in applications up to 30 kg/h (1400 kBTU/hr) maximum. - They are intended to be used as second or single stage regulators for domestic, commercial or industrial use. - The adjustable regulators BP2303R are equipped with a double spring wich ensures a stable minimum pressure in all conditions. - Certain models integrate an UPSO (Under Pressure Shut Off) safety device. - All products are equipped with an internal limited flow safety relief valve (LRV).

001050AA

Construction
Body and cover: die cast aluminium alloy Diaphragm: Reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR or FPM synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C
RP1/2 RC3/4

251 mm

006835AA

BP2303
001050AA

BP2303/OPSO
006835AA

Code

Inlet code F5D F2D F2D F2D F2D F2D F2D F2D F2D F5D F2D F2D F2D F2D F5D F2D F2D F2D F3E

Inlet connection FEM-1/2NPT FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-1/2NPT FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-1/2NPT FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rc3/4

Outlet code F5E F3E F3E F3E F3E F3E F3E F3E F3E F5E F3E F3E F3E F3E F5E F3E F3E F3E F3E

Outlet connection FEM-3/4NPT FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-3/4NPT FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-3/4NPT FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4 FEM-Rc3/4

Inlet pressure (Pe) bar psig 0,54 0,54 0,54 0,54 0,54 0,54 0,54 0,57,5 0,57,5 758 758 758 758 758 758 758 7110 7110

Outlet pressure (Pa) mbar ''wc 30(2736) 30(2736) 30(2736) 37(3345) 37(3345) 50(4560) 50(4560) 30(2736) 30(2736) 20300 10200 10200 20300 30(2736) 30(2736) 30(2736) 30(2736) 37(3345) 37 12(1114) 12(1114) 12(1114) 15(1318) 15(1318) 20(1824) 20(1824) 12(1114) 12(1114) 8125 480 480 8125 12(1114) 12(1114) 12(1114) 12(1114) 15(1318) 15

Flow rate (LPG) Kg/h kBTU/hr 30 30 30 30 30 30 30 20 18 30 20 30 30 30 25 18 25 25 25 1400 1400 1400 1400 1400 1400 1400 950 850 1400 950 1400 1400 1400 1200 850 1200 1200 1200

Vent (Position-Connection) 0h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 4h-G1/4-tube 8 0h-G1/4-tube 8 3h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 0h-G1/4-tube 8 6h-G1/4-tube 8

UPSO

PAD material FPM NBR FPM NBR NBR NBR NBR NBR NBR FPM NBR NBR NBR NBR NBR NBR NBR NBR NBR

BP2303
001053AA 001050AA 001050AB 001051AA 001051AB 001052AA 001052AB 001050BA 001060CA 001071AA 001070BA 001070AA 001070AB 006830AA 006835AB 006836AD 006835AA 006836AB 006836RA Y Y Y Y Y Y

BP2303R
Pa+14 Pa+1458 Pa+17,5 Pa+14110 Pa+14 Pa+1458 Pa+14 Pa+1458 0,54 0,54 0,57,5 0,54 0,54 0,64 758 758 7110 758 758 858

BP2303/OPSO

30

31 mm

133,5 mm

105 mm

High & low pressure regulators


2303AP - 2303BP

Application

- Mainly used in LPGas Two Stage systems for residential or commercial installations. Can also be used with Natural Gas and other non-aggressive gases - 2303AP are high pressure first stage regulators - 2303BP are low pressure second stage regulators

Features
- High capacity integral relief valve UL - 3/4 '' NPT vent pipe connection - Manometer or plug for manometer connection LISTED - Models for Two-Stage LPGas systems complying with NFPA 58 requirements: 2303AP - UL listed 10 psig first stage regulators - Propane flow rate capacity: up to 2 200 000 BTU/hr (46 kg/h) flow rate capacities are based on 30 psig inlet pressure and 8 psig outlet pressure - Set point: 10 psig outlet pressure, at 100 psig inlet pressure and 200 scfh flow rate 2303BP - UL listed 11 '' wc second stage regulators - Propane flow rate capacity: up to 1 200 000 BTU/hr (25 kg/h) flow rate capacities are based on 10 psig inlet pressure and 9 ''wc outlet pressure - Set point: 11 wc outlet pressure at 10 psig inlet pressure and 80 scfh flow rate

001080CC

Construction
Body and cover: die cast zinc alloy Inlet connection and orifice: brass Diaphragm: reinforced NBR Valve pad: NBR Minimum working temperature: -40F / -40C Maximum working temperature: 130F / 55C

2303BP
001090BC

2303AP
001080CC

Code

Inlet code F5B F5B F5D F5D Q2A Q2A F5D F3E F5D F5D F5E F5D

Inlet connection FEM-1/4NPT FEM-1/4NPT FEM-1/2NPT FEM-1/2NPT FEM-POL-USA FEM-POL-USA FEM-1/2NPT FEM-Rc3/4 FEM-1/2NPT FEM-1/2NPT FEM-3/4NPT FEM-1/2NPT

Outlet code F5D F5E F5D F5E F5E F5D F5D F3E F5D F5E F5E F5E

Outlet connection FEM-1/2NPT FEM-3/4NPT FEM-1/2NPT FEM-3/4NPT FEM-3/4NPT FEM-1/2NPT FEM-1/2NPT FEM-Rc3/4 FEM-1/2NPT FEM-3/4NPT FEM-3/4NPT FEM-3/4NPT

Inlet pressure (Pe) bar psig 217,2 217,2 217,2 217,2 217,2 217,2 217,2 116 0,351,05 0,351,05 0,351,05 0,351,05 30250 30250 30250 30250 30250 30250 30250 14230 515 515 515 515

Outlet pressure (Pa) bar-mbar psig -''wc 0,7(0,550,72)bar 0,7(0,550,72)bar 0,7(0,550,72)bar 0,7(0,550,72)bar 0,7(0,550,72)bar 0,7(0,550,72)bar 10(8-10,5)psig 10(8-10,5)psig 10(8-10,5)psig 10(8-10,5)psig 10(8-10,5)psig 10(8-10,5)psig 10(8-10,5)psig 7psig 11(10-14)''wc 11(10-14)''wc 11(10-14)''wc 11(10-14)''wc

Flow rate (LPG) kg/h kBTU/hr 46 46 46 46 46 46 60 80 19 25 25kg/h 30 2200 2200 2200 2200 2200 2200 2850 3800 890 1200 1200 1400

Vent (Position-Connection) 0h-FEM3/4NPT 0h-FEM3/4NPT 0h-FEM3/4NPT 0h-FEM3/4NPT 0h-FEM3/4NPT 0h-FEM3/4NPT 0h-FEM3/4NPT 3h-FEM3/4NPT 6h-FEM3/4NPT 6h-FEM3/4NPT 6h-FEM3/4NPT 6h-FEM3/4NPT

Manometer/Outlet (Connection - Type) Filter PLUG 1/8NPT PLUG 1/8NPT PLUG 1/8NPT PLUG 1/8NPT PLUG 1/8NPT PLUG 1/8NPT PLUG 1/8NPT MANO-DRY G1/4 PLUG 1/8NPT PLUG 1/8NPT PLUG 1/8NPT PLUG 1/8NPT Y Y Y Y Y Y Y -

2303AP - UL listed
001080AA 001080BB 001080CB 001080DB 001080FB 001080EB 001080CC 001081FB 001090AA 001090BB 001090CB 001090BC

2303AP
0,7(0,550,72)bar 0,5bar 28(2536)mbar 28(2536)mbar 28(2536)mbar

2303BP - UL listed

2303BP
28(2536)mbar

31

Low pressure regulators


BP2402 - BP2402R - BP2402/OPSO

Application

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These products with adjustable or variable outlet pressure are used in applications up to 50 kg/h (2400 kBTU/hr) maximum. - They are intended to be used as second stage regulators for commercial or industrial use. - Certain models integrate an UPSO (Under Pressure Shut Off) safety device. - Most of the products are equipped with an internal limited flow safety relief valve (LRV).
001100XX

Construction
Body and cover: die cast aluminium alloy Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR or FPM synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C
006845

BP2402
001100XX

BP2402/OPSO
006840

BP2402R
001111AX

Code

Inlet code F5D F2D F2D F2D F2D F5D N6A N6A F5D F2D F2D F2D F3E F2D F2D F2D F5D

Inlet connection FEM-1/2NPT FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-1/2NPT NUT-M20x1,5RH NUT-M20x1,5RH FEM-1/2NPT FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-Rc3/4 FEM-Rp1/2 FEM-Rp1/2 FEM-Rp1/2 FEM-1/2NPT

Outlet code F5F F3F F3F F3F F3F F5F F3F F3F F5F F3F F3F F3F F3F F2F F2F F2F F5F

Outlet connection FEM-1NPT FEM-Rc1 FEM-Rc1 FEM-Rc1 FEM-Rc1 FEM-1NPT FEM-Rc1 FEM-Rc1 FEM-1NPT FEM-Rc1 FEM-Rc1 FEM-Rc1 FEM-Rc1 FEM-Rp1 FEM-Rp1 FEM-Rp1 FEM-1NPT

Inlet pressure (Pe) bar psig 0,54 0,54 0,54 0,54 0,54 0,52 0,54 0,54 Pa+14 Pa+14 Pa+14 Pa+14 0,64 0,54 0,54 0,54 0,54 758 758 758 758 758 729 758 758 Pa+1458 Pa+1458 Pa+1458 Pa+1458 858 758 758 758 758

Outlet pressure (Pa) mbar psig -''wc 30(2545) 30(2545) 30(2545) 37(2545) 37(2545) 30(2545) 37(2545) 50(40100) 20300 10200 100300 20300 37 100(80120) 30(2545) 30(2545) 30(2545) 12(1018)''wc 12(1018)''wc 12(1018)''wc 15(1018)''wc 15(1018)''wc 12(1018)''wc 15(1018)''wc 20(1640)''wc 8125''wc 480''wc 1,44,4psig 8125''wc 15''wc 1,4(1,21,6)psig 12(1018)''wc 12(1018)''wc 12(1018)''wc

Flow rate (LPG) PRV kg/h kBTU/hr (type) 40 40 35 40 40 35 40 40 50 40 40 50 35 35 40 35 35 1900 1900 1660 1900 1900 1660 1900 1900 2400 1900 1900 2400 1660 1660 1900 1660 1660 LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV

Vent (Position-Connection) 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 4h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10 0h-G3/8-tube 10

PAD UPSO material Y Y Y Y NBR NBR FPM NBR NBR FPM NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR

BP2402
001130PX 001100XX 001120 001105 001107AA 001124PX 001117 001118 001111AX 001110 001112AA 001111XX 006846RA 006845LS 006840 006845 006848PX

BP2402R

BP2402/OPSO

32

Low pressure regulators


BP2402L - BP2402F - BP2402F/OPSO

Application

- Mainly used for LPG, can also be used for NG, nitrogen and air. - These products with adjustable or variable pressure are used in applications up to 120 kg/h (5700 kBTU/hr) maximum. - They are intended to be used as second stage regulators for commercial or industrial use. - The BP2402F OPSO range integrates models also equipped with the UPSO safety device. - Most of the products are equipped with an internal limited flow safety relief valve (LRV).

001200

Construction
Body and cover: die cast aluminium alloy Diaphragm: reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR or FPM synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C
133 mm 133 mm 260 mm 180 mm

39 mm

006898XX

BP 2402L
001200

BP2402F/OPSO
006898XX

Code

Inlet code F5F F5F F5F F3F F3F F3F F3F F3F F3F F3F F3F F5F F5F F3F F3F F3F F5F F5F F3F F3F

Inlet connection FEM-1NPT FEM-1NPT FEM-1NPT FEM-Rc1 FEM-Rc1 FEM-Rc1 FEM-Rc1 FEM-Rc1 FEM-Rc1 FEM-Rc1 FEM-Rc1 FEM-1NPT FEM-1NPT FEM-Rc1 FEM-Rc1 FEM-Rc1 FEM-1NPT FEM-1NPT FEM-Rc1 FEM-Rc1

Outlet code F5J F5J F5J F3J F3J F3J F3J F3J F3J F3J F3J F5J F5J F3J F3J F3J F5J F5J F3J F3J

Outlet connection FEM-1.1/4NPT FEM-1.1/4NPT FEM-1.1/4NPT FEM-Rc1.1/4 FEM-Rc1.1/4 FEM-Rc1.1/4 FEM-Rc1.1/4 FEM-Rc1.1/4 FEM-Rc1.1/4 FEM-Rc1.1/4 FEM-Rc1.1/4

Inlet pressure (Pe) bar psig Pa+0,54 Pa+0,54 1,44 Pa+0,54 Pa+0,54 0,54 0,54 0,54 0,84 0,54 0,54 Pa+758 Pa+758 2058 Pa+758 Pa+758 758 758 758 1258 758 758 Pa+758 758 758 Pa+758 1258 758 1258 958 758

Type of Outlet pressure

Outlet pressure (Pa) mbar psig -''wc

Flow rate (LPG) Kg/h or (n)m3/h kBTU/hr

Type PRV of gas (type) LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV LRV

Vent (Position-Connection) 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 7h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10 3h-G3/8-tube 10

56 mm

UPSO

PAD material FPM NBR FPM NBR NBR NBR NBR FPM NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR

BP2402L
001210AX 001230PX 001211AR 001210 001210XX 001215AA 001200 001200V 001216AA 001205 001212AA 001253XX 001251XX 001250XX 001253AX 001254AA 006898XX 006898AA 006897 006895 VAR-HWMT 20300 8125''wc ADJ-NSL 30(2545) 12(1018)''wc ADJ-NSL 350 5,1psig VAR-HWMT 10200 480''wc VAR-HWMT 20300 8125''wc ADJ-NSL 148(130180) 2,2(1,92,6)psig ADJ-NSL 30(2545) 12(1018)''wc ADJ-NSL 30(2545) 12(1018)''wc ADJ-NSL 300(270360) 4,4(3,95,2)psig ADJ-NSL 37(2545) 15(1018)''wc ADJ-NSL 37(2545) 15(1018)''wc 60kg/h 2850 LPG 60kg/h 2850 LPG 100(n)m3/h 3530SCFH NG 60kg/h 2850 LPG 60kg/h 2850 LPG 60kg/h 2850 LPG 60kg/h 2850 LPG 60kg/h 2850 LPG 60kg/h 2850 LPG 60kg/h 2850 LPG 60kg/h 2850 LPG 120kg/h 120kg/h 120kg/h 120kg/h 120kg/h 120kg/h 120kg/h 120kg/h 120kg/h 5700 5700 5700 5700 5700 5700 5700 5700 5700 LPG LPG LPG LPG LPG LPG LPG LPG LPG Y Y Y Y

BP2402F
FEM-1.1/4NPT Pa+0,54 FEM-1.1/4NPT 0,54 FEM-Rc1.1/4 0,54 FEM-Rc1.1/4 Pa+0,54 FEM-Rc1.1/4 0,84 FEM-1.1/4NPT FEM-1.1/4NPT FEM-Rc1.1/4 FEM-Rc1.1/4 0,54 0,84 0,64 0,54 VAR-HWMT 20300 8125''wc ADJ-NSL 30(2545) 12(1018)''wc ADJ-NSL 30(2545) 12(1018)''wc VAR-HWMT 20300 8125''wc ADJ-NSL 300(210300) 4,4(34,4)psig

BP2402F/OPSO
ADJ-NSL ADJ-NSL ADJ-NSL ADJ-NSL 30(2545) 12(1018)''wc 300(210300) 4,4(34,4)psig 100(80120) 1,5(1,21,7)psig 30(2545) 12(1018)''wc

33

Low pressure automatic changeovers


5165 - COMPACT80 - 9165BP22

Application
160 mm

75 mm

- These double stage low pressure automatic changeovers are used with 2 LPG cylinders or 2 LPG batteries of cylinders (see functioning and benefits in the users guide). - They are used in domestic or commercial applications up to 5 kg/h (240 kBTU/hr). - These products integrate both an automatic changeover and a low pressure regulator. They supply directly the gas appliance. They are all equipped with a visual indicator to show empty cylinder. - All these changeovers have an internal non return valve in the inlet connections to avoid any leakage whilst the cylinders are changed. - The Compact80 changeover is equipped with an OPSO (Over Pressure Shut Off) safety device, an OPSO indicator and a seal for OPSO reset button. - The 5165CV3 model fullfils the requirement of the standard EN12864 Annex D for gas installation in caravans and motorhomes following EN1949.

172 mm

30 mm

85 mm

5165C07
160 mm

130 mm

Construction
Body and cover: die cast zinc alloy Diaphragm: NBR and reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR or FPM synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

243 mm

41,5 mm

135 mm

8436005

COMPACT80
8436005

119 mm

002656AB

5165
5165C07

9165BP22
002656AB

Code

Inlet code E6B E6B F5B E6B E6B E6B F5B

Inlet connection MAL-M20x1,5RH MAL-M20x1,5RH FEM-1/4NPT MAL-M20x1,5RH MAL-M20x1,5RH MAL-M20x1,5RH FEM-1/4NPT PIPE-1/4-INV.FLARE

Outlet code E6B E6B F5D E7A K4C E7C F5D F5D

Outlet connection MAL-M20x1,5RH MAL-M20x1,5RH FEM-1/2NPT MAL-1/4LH-DIN PIPE-8-OG MAL-1/2LH-DIN FEM-1/2NPT FEM-1/2NPT

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) mbar ''wc 28 28 30 50 30 50 30 27,4 (25-35) 11 11 12 20 12 20 12 11 (10-14)

kg/h 2,6 4 45 1,5 1,5 4 5 10

Flow rate (LPG) kBTU/hr 125 190 190240 71 71 190 240 475

PRV OPSO (type) LRV LRV LRV LRV FRV Y/U Y/U -

5165
5165B02 5165BS1 5165C07 5165C09 5165CV3 8436005 8436014 0,47,5 116 116 0,516 0,316 116 0,720 1,717,2 6110 14230 14230 7230 4230 14230 10290 25250

COMPACT80 9165BP22
002656AB K2B

34

218 mm

Governors
STB 284-295-296-281

Application
- Pressure governors are designed to work with Natural Gas, Town Gas, LPG in gas phase and Air with temperature range between 10 C and + 60 C (40 F to 140 F). - They are widely used either in domestic or industrial installations where an accurate pressure regulation is required in particular for boilers, burners, industrial furnaces, in canalised distribution or as third stage pressure regulators in LPG installations.
46 mm

81,5 mm

52 mm

48 mm 72 mm

Construction
Body and cover: die cast aluminium alloy Diaphragm: NBR synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

001357

001710

107 mm 60 mm

296
001357
69 mm 81 mm

295
001745 001745 001314

284
001710

70,5 mm

70,5 mm

281
001314

Code 001710 001715 001719P 001727 001745 001766 001789H 001789L 001789S 001795 001796 001796AA 001796AY 001797P 001357 001367AX 001314 001315 001318 001318AA 001318AB

Inlet code F2A F2A F2A F2B F3C F3D F6L F6L F6L F3D F5C F5D F5D F3D F6L F6L F2E F3E F2E F2E F5E

Inlet connection FEM-Rp1/8 FEM-Rp1/8 FEM-Rp1/8 FEM-Rp1/4 FEM-Rc3/8 FEM-Rc1/2 FEM-M24X1,5RH FEM-M24X1,5RH FEM-M24X1,5RH FEM-Rc1/2 FEM-3/8NPT FEM-1/2NPT FEM-1/2NPT FEM-Rc1/2 FEM-M24X1,5RH FEM-M24X1,5RH FEM-Rp3/4 FEM-Rc3/4 FEM-Rp3/4 FEM-Rp3/4 FEM-3/4NPT

Outlet code F2A F2A F2A F2B F3C F3D F3D F3D F3D F3D F5D F5D F5D F3D F6L F6L F2E F3E F2E F2E F5E

Outlet connection FEM-Rp1/8 FEM-Rp1/8 FEM-Rp1/8 FEM-Rp1/4 FEM-Rc3/8 FEM-Rc1/2 FEM-Rc1/2 FEM-Rc1/2 FEM-Rc1/2 FEM-Rc1/2 FEM-1/2NPT FEM-1/2NPT FEM-1/2NPT FEM-Rc1/2 FEM-M24x1,5RH FEM-M24x1,5RH FEM-Rp3/4 FEM-Rc3/4 FEM-Rp3/4 FEM-Rp3/4 FEM-3/4NPT

Nominal Inlet pressure (Pe) mbar ''wc 30 50 50 28 18 25 20 20 13 30 24 2835 85 4550 1825 1523 50 30 12 815 2535

Type of Outlet pressure ADJ-NSL ADJ-NSL ADJ-NSL ADJ-NSL ADJ-NSL ADJ-NSL ADJ-NSL ADJ-NSL ADJ-NSL ADJ-NSL FIX ADJ-NSL FIX ADJ-NSL ADJ-NSL ADJ-NSL ADJ-SL ADJ-SL ADJ-SL ADJ-SL ADJ-SL

Outlet pressure (Pa) mbar ''wc 18 30 28 13 10 12 14 17 11 18 15 22 30 28 15,6 12,6 30 16 6 7 10 7,1 12 11 5,1 3,9 4,7 5,5 6,7 4,3 7,1 5,9 8,7 12 11 6,1 4,9 12 6,3 2,4 2,8 3,9

Flow rate Type of kg/h or (n)m3/h kBTU/hr or SCFH gas 0,4(n)m3/h 1,5kg/h 2kg/h 0,4(n)m3/h 0,5(n)m3/h 2(n)m3/h 2,7(n)m3/h 2,7(n)m3/h 3,1(n)m3/h 2(n)m3/h 2,7(n)m3/h 2,7(n)m3/h 4kg/h 4kg/h 2,75(n)m3/h 2,7(n)m3/h 8kg/h 7(n)m3/h 7(n)m3/h 7(n)m3/h 3,2(n)m3/h 14SCFH 71kBTU/hr 95kBTU/hr 14SCFH 18SCFH 70CFH 95SCFH 95SCFH 105SCFH 70CFH 95SCFH 95SCFH 190kBTU/hr 190kBTU/hr 97SCFH 95SCFH 380kBTU/hr 250SCFH 250SCFH 250SCFH 110SCFH NG LPG LPG NG NG NG NG NG NG NG NG NG LPG LPG NG NG

Vent Connection DH-NC DH-NC DH-NC DH-NC DH-NC DH-NC DH-NC DH-NC DH-NC DH-NC DH-NC DH-NC tube 6 DH-NC DH-NC DH-NC

STB284
12 20 20 11

STB295
7 10 9 9 5,1 12 8 1114 33 1820 710 69

STB296 STB281
20 12 4,7 36 1014

LPG tube 6 NG G1/8 tube 6 NG G 1/8 NG G 1/8 NG G 1/8

35

Cylinder low pressure regulators and adaptors


ZIPPY REGULATORS

Application

82,4 mm

- Used for LPG cylinders with automatic connecting valve. - The Zippy regulators with fixed outlet pressure are used in applications up to 1.5 kg/h (71kBTU/hr). - They are intended to be used as single stage regulators for low pressure domestic gas appliances (stoves, cookers, cabinet heaters, patio heaters, BBQ). - Certain models are equipped with an excess flow safety device (EFV) with manual (M) or automatic (A) reset. - All products are equipped with a thermal safety device which switches off cylinder valve in case of abnormal temperature rise.

59 mm

86,5 mm

001590AE

Construction
Body and cover: die cast zinc alloy Diaphragm: NBR or reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

001557XD

001590AE

001580PF

Code

Inlet code C1A C1A C1A C1A C1C C1C C1C C1C C1C C1D C1K C1K

Inlet connection CLIP-20 CLIP-20 CLIP-20 CLIP-20 CLIP-21 CLIP-21 CLIP-21 CLIP-21 CLIP-21 CLIP-22 CLIP-27 CLIP-27

Outlet code Z2A Z1D E6B E6B Z1D Z1D Q9A Q9A Q9A E6B Z1D Z2A

Outlet connection HNZ-13,5-DS HNZ-10-EN MAL-M20x1,5RH MAL-M20x1,5RH HNZ-10-EN HNZ-10-EN FEM-5/8-18 UNF(1) FEM-5/8-18 UNF(2) FEM-5/8-18 UNF(3) MAL-M20x1,5RH HNZ-10-EN HNZ-13,5-DS

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) mbar ''wc 30 29 (28-30) 29 (28-30) 37 29 (28-30) 29 (28-30) 29 (28-30) 29 (28-30) 29 (28-30) 29 (28-30) 37 30 12 11-12 11-12 15 11-12 11-12 11-12 11-12 11-12 11-12 15 12

Flow rate (LPG) kg/h kBTU/hr 1,5 1,3 1,3 1,5 1,3 1,3 1,3 1,3 1,3 1,3 1,5 1,5 71 62 62 71 62 62 62 62 62 62 71 71

EFV

Diaphragm material NBR NBR NBR NBR NBR-R NBR NBR NBR NBR NBR NBR-R NBR

CLIP20 - 21 - 22 - 27
001580PF 001590AF 001557XD 001557YD 001590AD 001590AG 001590CA 001590CB 001590CC 001557XE 001590AE 001580AC 0,512 0,37,5 0,37,5 116 0,37,5 0,37,5 0,37,5 0,37,5 0,37,5 0,37,5 116 116 7180 4110 4110 14230 4110 4110 4110 4110 4110 4110 14230 14230 A M M A

(1-2-3): Regulators equipped with a none dismountable hose BS 3212 - (1): 60 cm - (2): 70 cm - (3):75 cm

36

Cylinder low pressure regulators and adaptors


ZP10 REGULATORS

Application

- They are used on LPG cylinders with automatic connecting valve in applications up to 2kg/h (95kBTU/hr). - Main applications are agricultural (poultry heating), industrial or craft (radiant or air heaters). - Their outlet pressure is adjustable on full rotation of the handwheel which is indexed for a better control.

Construction
Body and cover: die cast zinc alloy Inlet connection and orifice: brass Diaphragm: reinforced NBR Valve pad: NBR Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

001520AB 001520AB

Code

Inlet code C1A C1C C1K

Inlet connection CLIP-20 CLIP-21 CLIP-27

Outlet code Z1D Z1D Z1D

Outlet connection

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) mbar ''wc 50150 50150 50150 2060 2060 2060

Flow rate (LPG) kg/h kBTU/hr 2 2 2 95 95 95

ZP10
001520AA 001520AB 001520AC HNZ-10-EN HNZ-10-EN HNZ-10-EN 116 116 116 14230 14230 14230

ZIPPY ADAPTORS
- The Zippy adaptors are mainly used to connect a hose for high pressure applications. - They can withstand pressures up to 20 bar (290 psig). - They are equipped with a thermal safety device which switches off cylinder valve in case of abnormal temperature rise. - Certain models are equiped with a non-return valve. Horizontal
003250

Vertical
003251AB

46 mm

ucts These prodlators, gu are not re t provide they don reduction re any pressu

62 mm

Code

Inlet code C1A C1A C1A C1A C1A C1C C1C C1C C1C C1K C1K

Inlet connection CLIP-20 CLIP-20 CLIP-20 CLIP-20 CLIP-20 CLIP-21 CLIP-21 CLIP-21 CLIP-21 CLIP-27 CLIP-27

Outlet code L2A E6B F1B F6D L2A E6B F6D L2A L2A E6B L2A

Outlet connection MAL-NF21,7LH MAL-M20x1,5RH FEM-G1/4RH FEM-M14x1,5RH MAL-NF21,7LH MAL-M20x1,5RH FEM-M14x1,5RH MAL-NF21,7LH MAL-NF21,7LH MAL-M20x1,5RH MAL-NF21,7LH

Outlet position Horizontal Horizontal Horizontal Vertical Vertical Horizontal Vertical Vertical Horizontal Horizontal Horizontal

Non return valve Y Y Y Y Y Y Y Y


50 mm

67 mm

ADC 20H - 20V - 21H - 21V - 27H


003250 003250AF 003250BC 003251AA 003251AB 003250AG 003251AC 003251AD 003250AR 003257AB 003257AE

46 mm

79 mm

37

56,5 mm

Cylinder low pressure regulators and adaptors


EUROPA 2S

Application

- Used for LPG cylinders with a handwheel type cylinder valve. - These products with variable outlet pressure are used in applications up to 1.1 kg/h (52kBTU/hr). - They are intended to be used as single stage regulators for low pressure domestic gas appliances. - They are equipped with a filter in the inlet connection.

000200SC

Construction
Body and cover: die cast zinc alloy Diaphragm:NBR synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

EUROPA 2S
000200SC

Code

Inlet code
N1D N2B

Inlet connection
NUT-W20LH-25x13,5-G/S NUT-NF21,8LH-27x14-G/S

Outlet code
Z1D Z1D

Outlet connection

Inlet pressure (Pe) bar psig


0,27,5 0,27,5 3110 3110

Outlet pressure (Pa) mbar ''wc


2080 2080 832 832

Flow rate (LPG) kg/h kBTU/hr


1,1 1,1 52 52

EUROPA 2S
000200SC 000230SC HNZ-10-EN HNZ-10-EN

38

Cylinder low pressure regulators and adaptors


EUROPA 5 RVT - 425

Application
97,5 mm

- Used for LPG cylinders with a handwheel type cylinder valve. - These products with fixed outlet pressure are used in applications up to 1.8 kg/h (85kBTU/hr). - They are intended to be used as single stage regulators for low pressure domestic gas appliances. - The RVT regulator is equipped with a thermal safety and a pressure gauge in the inlet. - The 425 regulator is equipped with an excess flow safety device (EFV)with manual reset (M).

97,5 mm

97,5 mm

97,5 mm

001614

Construction
Body and cover: die cast zinc alloy Diaphragm: NBR synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C

001900Z

EUROPA5
001651

425
001955BS

RVT
001900Z

Code

Inlet code N1E P2D N4D N2A N4J N4B N1D N4B N4K N4K N3A P1A P1A P2C N2C N2C N4B N2C N2C

Inlet connection NUT-W20LH-UNI-G/G POLS-USA-R6-SN NUT-W21,8LH-30x21KBI NUT-NF21,8LH-27x14-G/G NUT-W21,8LH-28x16,5CH NUT-W21,8LH-R5DIN/KLF NUT-W20LH-25x13,5-G/S NUT-W21,8LH-R5DIN/KLF NUT-W21,8LH-27x17MSZ NUT-W21,8LH-27x17MSZ NUT-M21,8LH-30,5BS POLM-5/8LH-BS-HN POLM-5/8LH-BS-HN POLS-USA-R2-SN NUT-NF21,8LH-R5NF NUT-NF21,8LH-R5NF NUT-W21,8LH-R5DIN/KLF NUT-NF21,8LH-R5NF NUT-NF21,8LH-R5NF

Outlet code Z1E Z1D E7A E7A Z1D E7A Z1D E7A Z1D Z1D Z1D Z1D Z1D Z1D Z1D Z1D E7A E6B E6B

Outlet connection HNZ-10-UNI HNZ-10-EN MAL-1/4LH-DIN MAL-1/4LH-DIN HNZ-10-EN MAL-1/4LH-DIN HNZ-10-EN MAL-1/4LH-DIN HNZ-10-EN HNZ-10-EN HNZ-10-EN HNZ-10-EN HNZ-10-EN HNZ-10-EN HNZ-10-EN HNZ-10-EN MAL-1/4LH-DIN MAL-M20x1,5RH MAL-M20x1,5RH

Inlet pressure (Pe) bar psig

Outlet pressure (Pa) mbar ''wc 29(28-30) 30 29(28-30) 30 50 50 30 50 30 30 29(28-30) 37 50 30 28 37 50 28 37 1112 12 1112 12 20 20 12 20 12 12 1112 15 20 12 11 15 20 11 15

Flow rate (LPG) kg/h kBTU/hr 1 1,1 1,3 1 1 1 1 1 1,2 1 1,3 1,3 1,1 1,1 1,3 1,5 1,5 1,3 1,5 47 52 62 47 47 47 47 47 57 47 62 62 52 52 62 71 71 62 71

EFV Manometer/Outlet Filter (Connection type) M M MANO-DRY G1/8 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y

EUROPA 5
001610AA 001660FE 001668 001604AA 001608N 001630CD 001614 001630C 001643AA 001644 001650 001651 001652 001660 001600CL 001601CL 001900Z 001955BS 001955CS 0,37,5 0,37,5 0,37,5 0,37,5 0,57,5 0,510 0,37,5 116 18 18 0,37,5 116 116 0,37,5 0,37,5 116 4110 4110 4110 4110 7110 7145 4110 14230 14115 14115 4110 14230 14230 4110 4110 14230 14230 4110 14230

RVT
116

425
0,37,5 116

39

Multi-cylinder systems
MCH6795-4100 MCTR6700-6702 - CTR6600

Application

- These systems are used for domestic and commercial multi-cylinder applications up to 10kg/h (475 kBTU/hr). - These products are all equipped with a bracket for a correct and safe installation on a wall. - The MCTR6700 and CTR6600 are equipped with an internal non return valve in the inlet connections to avoid any leakage whilst the cylinders are changed.

Construction
Regulators body and cover: die cast zinc alloy Valves: brass Diaphragm: NBR or reinforced NBR (NBR-R) synthetic rubber Valve pad: NBR synthetic rubber Minimum working temperature: -4F / -20C Maximum working temperature: +140F / +60C
006708 006728AB

MCH4100
004160

MCTR6700
006708

MCH6795
006795AA

uct This prod lator, not a regu ovide is pr it doesnt reduction re any pressu

r, a regulato ction uct is not redu This prod ide any pressure prov it doesnt

CTR6600
006625

MCTR6702
006728AB

Code

Inlet code E6B L1A L1A L1A L1A E6B E6B L1A L1A L2A L2A L1A L1A L1A L1A L2A L1A L1A L2A

Inlet connection MAL-M20x1,5RH MAL-W20LH-UNI MAL-W20LH-UNI MAL-W20LH-UNI MAL-W20LH-UNI MAL-M20x1,5RH MAL-M20x1,5RH MAL-W20LH-UNI MAL-W20LH-UNI MAL-NF21,7LH MAL-NF21,7LH MAL-W20LH-UNI MAL-W20LH-UNI MAL-W20LH-UNI MAL-W20LH-UNI MAL-NF21,7LH MAL-W20LH-UNI MAL-W20LH-UNI MAL-NF21,7LH

Outlet code F2D F2C F2D F2C L1A E6B E2B L1A L1A L2A L2A L1A L1A L1A L1A L2A L1A L1A L3A

Outlet connection FEM-Rp1/2 FEM-Rp3/8 FEM-Rp1/2 FEM-Rp3/8 MAL-W20LH-UNI MAL-M20x1,5RH MAL-R1/4 MAL-W20LH-UNI MAL-W20LH-UNI MAL-NF21,7LH MAL-NF21,7LH MAL-W20LH-UNI MAL-W20LH-UNI MAL-W20LH-UNI MAL-W20LH-UNI MAL-NF21,7LH MAL-W20LH-UNI MAL-W20LH-UNI MAL-M21,8LH-BS

Inlet pressure (Pe) Type of bar psig Outlet pressure

Outlet pressure (Pa) mbar wc 37 30(2545) 30(2545) 29(2830) =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe 15 12(1018) 12(1018) 1112 =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe =Pe

Flow rate (LPG) PRV kg/h kBTU/hr (Type) 6 4 10 4 285 190 475 190 LRV LRV LRV LRV LRV LRV LRV LRV LRV

Manometer/Outlet (Connection -Type) Test point PLUG G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-DRY G1/4 PLUG G1/4 MANO-DRY G1/4 PLUG G1/4 MANO-DRY G1/4 MANO-DRY G1/4 MANO-DRY G1/4 PLUG G1/4 MANO-DRY G1/4

Diaphragm material NBR-R NBR NBR NBR -

Notes

MCH6795
006795AA 006708 006726 006728AB 004160 004161 004162 006624 006625 006627 006643 006652 006653 006682 006683 006684 006692 006693 006694 116 0,511 0,511 0,3516 max20 max20 max20 max20 max20 max20 max20 max20 max20 max20 max20 max20 max20 max20 max20 14230 7160 7160 4230 max290 max290 max290 max290 max290 max290 max290 max290 max290 max290 max290 max290 max290 max290 max290 FIX Ball valve + pressure test point 2Cyl-3Outlets 2Cyl-3Outlets 2Cyl-3Outlets 3Cyl-3Outlets 3Cyl-3Outlets 3Cyl-3Outlets 4Cyl-3Outlets 4Cyl-3Outlets 4Cyl-3Outlets 5Cyl-3Outlets 5Cyl-3Outlets 5Cyl-3Outlets

MCTR6700
ADJ-NSL ADJ-NSL FIX -

MCTR6702 MCH4100

CTR6600
-

40

Accessories
FILTERS AND CARTRIDGES

Application
- Used with LPG, natural gas, nitrogen and air. - They are intended to be installed upstream to the regulator in order to protect them from dirt entering. - Their robust construction allows the products to withstand pressures above 20 bar (290 psig). Test pressure 50 bar. - Certain models are equipped with a magnet which traps magnetic metalic swarfs. - The cartridges are delivered with an Oring.
65 mm

004400

99 mm

Construction
68,5 mm

Body in hot stamped brass.

Minimum working temperature: Maximum working -4F / -20C temperature: +140F / +60C

004401

FT44-41
004410
106,5 mm

004452

004405AC

004410 004451

FT44-16
004400NP

004450

Code

Inlet code F2B F2B F5B E6B N6A E6B F2D F5D E1D E1E

Inlet connection FEM-Rp1/4 FEM-Rp1/4 FEM-1/4NPT MAL-M20x1,5RH NUT-M20x1,5RH MAL-M20x1,5RH FEM-Rp1/2 FEM-1/2NPT MAL-G1/2RH MAL-G3/4RH FEM-Rp1 FEM-1NPT

Outlet code

Outlet connection MAL-R1/4 MAL-R1/4 MAL-1/4NPT MAL-M20x1,5RH MAL-M20x1,5RH MAL-M20x1,5RH MAL-R1/2 MAL-1/2NPT MAL-G1/2RH MAL-G3/4RH FEM-Rp1 FEM-1NPT

Filter

Code

Filtration

To be used with the model

F44-16
004400 004400M 004400NP 004405 004405AB 004405M 004401 004401NP 004405AC 004405AE E2B E2B E5B E6B E6B E6B 80 m 80 m +MAGNET 80 m 80 m 50 m 80 m +MAGNET 80 m 80 m 80 m 80 m 80 m 80 m 004450 004451 004452 004454

CARTRIDGES
80 m 80 m 80 m 50 m F44-16 F44-34 F44-52 F44-16

F44-34
E2D E5D E1D E1E

F44-41
004410 F2F 004410NP F5F F2F F5F

41

93 mm

FT44-34

50 mm

Accessories
PRESSURE GAUGES - CHANGEOVER INDICATORS MANO HP - PRESSURE GAUGES

Application
These high pressure gauges can be mounted on the high pressure regulators, in place of the plugs (when available-see tables) or in replacement of an existing pressure gauge. - They can also be installed on the piping. - Scales are in double units: bar and psig. - For a better reliability, certain models have the housing filled with oil.
Inlet code E2B E5B E2B E5B E2A E5A E2B E5B Inlet connection MAL-R1/4 MAL-1/4NPT MAL-R1/4 MAL-1/4NPT MAL-R1/8 MAL-1/8NPT MAL-R1/4 MAL-1/4NPT Inlet pressure (Pe) bar psig MANOMETER/OUTLET (Connection -Type) OIL OIL DRY DRY DRY DRY OIL OIL

Code

Diameter

MANO-HP
006956BX 006956XX 006958BX 006958XX 006959BX 006959XX 006960BX 006960XX 04 04 04 04 04 04 016 016 058 058 058 058 058 058 0230 0230 68mm (2 11/16'') 68mm (2 11/16'') 52mm (2 1/16'') 52mm (2 1/16'') 42mm (1 10/16'') 42mm (2 10/16'') 68mm (2 11/16'') 68mm (2 11/16'')

006956BX

MAGISCOPE P95 - P96 INDICATORS

Application
- These indicators allow a remote observation of the empty "service" cylinder. - They are installed on the pipe, between the high-pressure automatic changeover and the second stage (low-pressure) regulator.

Code

Inlet code E6B E6A

Inlet connection MAL-M20x1,5RH MAL-M10X1RH

Outlet code E6B -

Outlet connection MAL-M20x1,5RH -

Inlet pressure bar S:1,5-R:0,8 S:1,5-R:0,8 psig

MAGISCOPE P95
P009502 P009600 S:22-R:12 S:22-R:12

P95

MAGISCOPE P96

VZ2600D - VZ2600L INDICATORS

P96

Application
- The VZ2600L indicators allow a remote control of the empty "service" cylinder. They are installed on the pipe, between the high-pressure automatic changeover and the second stage (low-pressure) regulator. - The VZ2600D indicators are used as spare part on the ACH2600 automatic changeovers. They can also be installed on the pipe, between the high-pressure automatic changeover and the second stage (low-pressure) regulator.
VZ2600D
psig S:22-R:12 S:14-R:9 S:22-R:12 S:22-R:12

Code

Inlet code E1A E1A L1A E6B

Inlet connection MAL-G1/8RH MAL-G1/8RH MAL-W20LH-UNI MAL-M20x1,5RH

Outlet code L1A E6B

Outlet connection

Inlet pressure (Pe) bar S:1,5-R:0,8 S:1-R:0,6 S:1,5-R:0,8 S:1,5-R:0,8

VZ2600D
002610 002612 002620 002621 -

VZ2600L
MAL-W20LH-UNI MAL-M20x1,5RH

VZ2600L

42

Accessories
BALL VALVES 620 - 627 - 621

Construction
Body and end connection material: stamped brasss CW617N (EN 12165) Body and end connections coating: nickel plated (for 620 and 621) Ball: stamped brass chrome plated CW617N (EN12165) Stem: brass bar stock CW614N (EN12164) Handle: - chrome plated steel with yellow PVC coating (for 620 and 621) - die cast aluminium alloy with yellow painting (for 627) Ball seat: PTFE Thermal expansion joint: NBR Stem Oring: NBR Handle screw: steel Anti-friction disc: PTFE (for 620 and 621)

620
Used for LPG, natural gas, nitrogen, air Pressure: from 6 mbar to 20 bar (2,4 wc to 290 psig) MOP 5-20 Working temperature: from -20C to +60C (-4F/+ 140F)
1/4
8 85 43 Rp1/4 51,5 Rp1/4

BSP RANGE
CODE

3/8
10 85 43 Rp3/8 51,5 Rp3/8

1/2
15 85 46 Rp1/2 62 Rp1/2

3/4
20 85 50 Rp3/4 69 Rp3/4

1
25 85 53 Rp 1 83 Rp 1

1/4

1/2

2
50 135 94 Rp2 126 Rp2

6200120 6200130 6200140 6200160 6200180 6200200 6200220 6200260 32 110 68 Rp1 Rp1
1/4

DN A (mm) H (mm)

40 110 73 Rp1 Rp1


1/2

62000140

T
L (mm)

96
1/4

108
1/2

BSP connections

627
Used for LPG, natural gas, nitrogen, air Pressure: 20 bar (290 psig) max. MOP 5-20 Working temperature: from -20C to +60C (-4F/+ 140F)
RANGE CODE

Rp 1/2
6276004 Rp 1/2 40 47 75 Rp 1/2 10

M20x1,5
6276014 M20x1,5 40 47 75 Rp 1/2 10

U
H (mm) A (mm) L (mm)

6210040

T
DN

621
Used for LPG, natural gas, nitrogen, air UL approved Pressure: 17,25 bar (250 psig) max. 600 WOG - listed UL 61 WL Working temperature: from -10C to +60C (4F/+ 140F)
1/4
8 65 40 1/4 40,3 1/4

NPT RANGE
CODE

3/8
10 88 47 3/8 43,3 3/8

1/2
15 90 55 1/2 53 1/2

3/4
20 91 57 3/4 61 3/4

1
25 116 58 1 73 1

1/4

1/2

2
50 149 94 2 108 2

6210020 6210030 6210040 6210060 6210080 6210100 6210120 6210160 32 137 79 1


1/4

DN A (mm) H (mm)

40 139 85 1
1/2

6276014

T
L (mm)

86 1
1/4

95 1
1/2

NPT connections

43

CLESSE INDUSTRIES 16, avenue Paul Santy - 69008 Lyon - FRANCE - Phone + 33 4 78 78 15 00 Fax + 33 4 78 78 15 25 - e-mail: commercial@clesse-industries.com

Iso N: T.60.22.05.002.A - 02.2007 - Clesse Industries Technical and general information included in this document cannot engage in any way the responsibility of Clesse Industries. - Gradivas : 00 33 4 78 22 45 69

S-ar putea să vă placă și