Documente Academic
Documente Profesional
Documente Cultură
BACHELOR OF TECHNOLOGY
IN
MECHANICAL ENGINEERING
KALASALINGAM UNIVERSITY
(Kalasalingam Academy of Research and Education) KRISHNANKOIL- 626 126
Academic Year (2011-2012)
1
KALASALINGAM UNIVERSITY
(Kalasalingam Academy of Research and Education) Krishnankoil- 626 126.
DECLARATION
We hereby declare that the project work done in EXPERIMENTAL STUDIES ON MECHANICAL PROPERTIES OF ALUMINIUM / RED MUD METAL MATRIX COMPOSITE FABRICATED BY STIR CASTING METHOD in partial fulfilment of requirements for the award of Bachelor of Technology in Mechanical Engineering, under the supervision of Mr.RAJESH.S, Assistant Professor-I, Department of Mechanical Engineering, Kalasalingam University, Krishnankoil.
BONAFIDE CERTIFICATE
Certified that this project report EXPERIMENTAL STUDIES ON MECHANICAL PROPERTIES OF ALUMINIUM / RED MUD METAL MATRIX COMPOSITE FABRICATED BY STIR CASTING METHOD is the bonafide work of PON SWARNA RAJA PANDIAN.S (9908009128), RAGHUNATH.K (9908009138), RAJKUMAR.D (9908009149) who carried out the project work under my supervision.
Internal Examiner
External Examiner
ACKNOWLEDGEMENT
A project of this magnitude and nature requires kind cooperation and support for successful completion. At the outset, we wish to express our sincere gratitude to our Vicechancellor Dr. S. Radhakrishnan for giving us kind permission to do this project. We express our deep sense of gratitude and indebtedness to Mr. S. Rajesh, Assistant Professor I, Department of Mechanical Engineering, Kalasalingam University, for his kind guidance and encouragement throughout this project work. We also express our hearty gratitude to Dr. S. Rajakarunakaran, Senior Professor and Head of the department, Department of Mechanical Engineering, Kalasalingam University, for his valuable suggestion. We express our deep sense of gratitude and indebtedness to Dr. J.T.Winowlin Jappes, Professor & Head of CENTER FOR COMPOSITE MATERIALS, Department of Mechanical Engineering, Kalasalingam University and Prof. N. Sureshkumar, Associate Professor, Department of Civil Engineering, Kalasalingam University, for their valuable suggestions and helping us in carrying out our experiments in the Tribometer and Brinell hardness testing Machine respectively during the course of our project. We also express our hearty gratitude to all the Faculty members of CENTER FOR COMPOSITE MATERIALS, Department of Mechanical Engineering, and Kalasalingam University, for their valuable advises in our progress. We also extend our sincere thanks to Mr. A. Marimuthu, Lab Technician (Machine Shop) Mr. R. Muthumani, Lab Technician (Machine Shop), Mr.B. Palmurugan, Lab Technician (Fitting Shop), Mr. C. Pandimuneeshwaran, Lab Technician (Center For Composite Materials) Mr. M. Suryakumar, Lab Technician (Strength of Materials Lab) for providing us help throughout the project.
Abstract
Red mud emerges as the major waste material during production of alumina from bauxite by the Bayers process. It comprises of oxides of iron, titanium, aluminium and silica along with some other minor constituents. Based on economics as well as environmental related issues, enormous efforts have been directed worldwide towards red mud management issues i.e. of utilization, storage and disposal. Different avenues of red mud utilization are more or less known but none of them have so far proved to be economically viable or commercially feasible. It is generally agreed that resistance to wear of MMCs is created by reinforcement and also the wear properties are improved remarkably by introducing hard inter metallic compound into the aluminium matrix. The reinforcing materials are generally SiC, Al2O3, TiB2 etc and are costly. The present research work has been undertaken with an objective to explore the use of red mud as a reinforcing material as a low cost option. This is due to the fact that red mud alone contains all these reinforcement elements and is plentifully available. Experiments have been conducted under laboratory condition to assess the wear characteristics of the aluminium red mud composite under different working conditions in pure sliding mode on a pin-on-disc machine. This has been possible by fabricating the samples through usual stir casting technique. The samples are fabricated with LM 25 matrix material with different % of red mud material. Dispersion of red mud particles in aluminium matrix improves the hardness of the matrix material and also the wear behaviour of the composite. While increasing the % of reinforcements of the material there is decrease in wear characteristic. Finally, Artificial Neural Network (ANN) was employed to develop mathematical model for wear prediction using Decision Prediction Tool 5.7.1. The accuracy of the developed model is 83%.
i 5
TABLE OF CONTENTS
CHAPTER NO
ABSTRACT LIST OF TABLE LIST OF FIGURE LIST OF SYMBOL 1 INTRODUCTION 1.1 Need of metal matrix composite 1.2 Application of metal matrix composite 1.3 Materials and structure 2 LITERATURE REVIEW
TITLE
PAGE NO
i ii iii iv 1 1 1 2 4 6 7 8 13 13 15 18 19 19 21 23 25 31 31 32 33 35 36 36 37 37 38
LIST OF EQUIPMENTS USED 7.1 Stir casting setup 7.2 Hardness testing machine 7.3 Center lathe 7.4 Pin on disc Tribometer 7.5 scanning electron microscope
39 39 40 41 42 43 44 45 45 48 48 48 50 50 51 52 53 54 54 55 56 63 65 66
EXPERIMENTAL METHODOLOGY 8.1 Material selection 8.2 Dispersion phase red mud
RAW MATERIAL PRE PROCESSING 9.1 Processing of raw material 9.2 Combination of raw materials
10
FABRICATION OF METAL MATRIX COMPOSITE 10.1 Preparation of mould 10.2 Melting and casting of specimen 10.3 Dispersion processing 10.4 Hardness test 10.5 Density of cast specimen 10.6 Wear test 10.7 composite fabricated by stir casting method on micro structure
11 12 13 14
Page No
30 45 45 47 49 59 59 59
Ii
Page No
2 3 11 11 14 15 22 33 35 39 40 41 42 43 44 47 49 51 53 56 58 58
iii
LIST OF SYMBOLS
Symbol
(sigma) (phi) (nu) (euro)
Explanation
Summation Activation function Threshold function Computation
iv
10
CHAPTER 1 1. INTRODUCTION
Material is anything made of matter, constituted of one or more substances. Wood, cement, hydrogen, air and water are all examples of materials. Sometimes the term "material" is used more narrowly to refer to substances or components with certain physical properties that are used as inputs to production or manufacturing. In this sense, materials are the parts required to make something else, from buildings and art to stars and computers.Metalmatrix composites (MMCs) are known as the most useful and high-tech composite materials in our world. MMCs are very important because of their high ratio of strength and weight, high Young modulus and high abrasive properties.
Aluminium MMCs exhibit an excellent combination of high specific strength and stiffness, high wear resistance, good seizure resistance, improved fatigue and creep strength as compared to the base alloy. The MMC finds various applications in different fields as follows MMCs represent the Next Generation of solutions for todays electronic requirements Prototyping for the Space Shuttle, Commercial airliners Bicycles & automobiles Electronic substrates and Aerospace
Comparable construction unit characteristics are attainable only with the application of powder metallurgical aluminium alloys or when using heavy iron pistons. The reason for the application of composite materials is, as already described the improved high temperature properties. Potential applications are in the area of undercarriages, e.g. transverse control arms and particle-strengthened brake disks, which can be also applied in the area of rail mounted vehicles, e.g. for undergrounds and railway (ICE).
12
The difference between a material and a structure is not clearly defined. Many draw the lines between what you understand as a homogeneous material when you see it with your bare eyes, and the inhomogeneous material structure that you clearly see is made up of a fixed geometry or mixing of materials. For instance an alloy is by this definition a material even though it consists of two or more components, but a honeycomb core built up of two different components is a structure. Materials are often classified into the six broad classes that are shown in figure 1.1; metals, ceramics, glasses, elastomers, polymers and composites. But, when we also include material structures, the number is bigger, and the classification of the term materials and structures, even though it is not a conventional way of making a classification, may look like the one purposed in figure 1.2.
13
In recent scenario, there is an increasing trend towards using composite materials in order to achieve better performance in engineering materials. Thus, production and application of metal matrix composites (MMC) have increased in recent years (Kok M, 2005). MMCs are very important because of their high strength to weight ratio, high Young modulus and wear resistance properties, when compared to most conventional materials (Degischer HP, 1997). It also possesses high thermal conductivity and corrosion resistance properties (Hossein Abdizadeh et al 2011). Therefore, MMC are being used for wide variety of application such as, connecting rod, automobile drive shafts, cylinder liner, cylinder block, rotors (Rasit Koker et al 2005), heat sink (Dobrzanski LA et al 2006, Torralba et al, 2003) , crane bearing and motor blocks (Liu HN et al 1999, Moustafa SF et al 1997).
To fabricate MMC, metallic matrix materials should be embedded with reinforced materials, which is in the form of continuous fibers, short fibers, chopped fibers, whiskers or particulates (Yusuf Sahin, 2010). In general, aluminium, copper, nickel, silver, zinc, magnesium will be used as matrix material and Silicon carbide (Yusuf Sahin, 2010), Alumina oxide (Sun Zhiqiang et al 2005, Arslan G et al 2001, Turan S et al 2001), boron nitride, graphite, beryllium oxides, graphite (F. Akhlaghi et al 2009) silicon nitride (Sun Zhiqiang et al 2005, Fujii Hidetoshi et al 1993, Jenfin Lin et al 2001) will be used as reinforcement material. Among the different matrix material aluminium and its alloys are promising materials in automobile and aerospace application owing to their excellent mechanical properties (F. Akhlaghi et al 2009), and other major advantage is better corrosion resistance properties, moreover aluminium cheaper than other light matrix materials. However, low wear resistance of pure aluminium is a serious drawback in using many applications. Addition of ceramic reinforcement materials in the aluminium matrix material would improve the strength, hardness, wear resistance and corrosion resistance of the matrix materials. (Mehdi Rehimian et al 2011, Toress B et al 2002, Sahin Y 1996). In order to embedded the reinforcement material with matrix material, there are different manufacturing methods are available.
14
The manufacturing methods are classified as: liquid state processing, solid state processing and deposition techniques. The liquid state processing includes, stir casting, semi solid processing (Bekir Sadik Unlu 2008), spray casting, infiltration and in situ processing. Solid state processing includes powder metallurgy (Bekir Sadik Unlu 2008,Liu B et al 1994), diffusion bonding, pultrusion, and attriter milling. Deposition technique includes chemical vapour deposition, and physical vapour deposition. In case of liquid state processing methods, the ceramic material are added in to the melt and stirred, because of stirring ceramic material with matrix material has some advantage ie better matrix and ceramic material bonding and easier control of micro structure. (Bekir Sadik Unlu 2008, Bermudez MD et al 2001,Mazeen AA et al 1992,Sahin Y et al 2003, Gahr KH et al 2000). However liquid state processing methods has two major drawbacks, firstly the ceramic particles are not wetted with matrix material and secondly, the particles tend to sink or float depending on their density relative to the liquid metal and so that dispersion of the particles are not uniform, where as solid state process, especially powder metallurgy process offers uniform distribution of reinforcement with matrix material.( Bekir Sadik Unlu 2008, Bai M et al 1995, Nesarikar AR et al 1991, Soliman FA et al 1997).
15
16
The key characteristics of composites is the Specific strength (the strength to weight ratio) Specific stiffness or specific modulus (the stiffness-to-weight ratio) Tailored material ( since composites are composed of 2 or morephases,
They can be formulated to meet the needs of a specific application with considerable ease) Composites are not a single material but a family of materials whose stiffness, strength, density, and thermal and electrical properties can be tailored. The matrix, the reinforcement material, the volume and shape of the reinforcement, the location of the reinforcement, and the fabrication method etc. can all be varied to achieve required properties
17
o DISPERSED PHASE
MATRIX PHASE
The matrix is the monolithic material into which the reinforcement is embedded, and is completely continuous. This means that there is a path through the matrix to any point in the material, unlike two materials sandwiched together. In structural applications, the matrix is usually a lighter metal such as aluminium, magnesium, or titanium, and provides a compliant support for the reinforcement. In high temperature applications, cobalt and cobalt-nickel alloy matrices are common. .
The second phase (or phases) is embedded in the matrix in a discontinuous form. This secondary phase is called dispersed phase. Dispersed phase is usually stronger than the matrix, therefore it is sometimes called reinforcing phase. Many of common materials (metal alloys, doped Ceramics and Polymers mixed with additives) also have a small amount of dispersed phases in their structures, however they are not considered as composite materials since their properties are similar to those of their base constituents (physical properties of steel are similar to those of pure iron).
POLYMER MATRIX COMPOSITE Polymer Matrix Composite a polymer (resin) matrix combined (PMC) is the with a fibrous material reinforcing consisting dispersed of phase.
Polymer Matrix Composites are very popular due to their low cost and simple fabrication methods. Use of non-reinforced polymers as structure materials is limited by low level of their mechanical properties: tensile strength of one of the strongest polymers - epoxy resin is 20000 psi (140 MPa). In addition to relatively low strength, polymer materials possess low impact resistance.
18
CERAMIC MATRIX COMPOSITE Ceramic matrix composites (CMCs) are a subgroup of composite materials as well as a subgroup of technical ceramics. They consist of ceramic fibers embedded in a ceramic matrix, thus forming a ceramic fiber reinforced ceramic (CFRC) material. The matrix and fibers can consist of any ceramic material, whereby carbon and carbon fibers can also be considered a ceramic material. Ceramic Matrix Composite (CMC) is a material consisting of a ceramic matrix combined with a ceramic (oxides, carbides) dispersed phase. Ceramic Matrix Composites are designed to improve toughness of conventional ceramics, the main disadvantage of which is brittleness. Ceramic Matrix Composites are reinforced by either continuous (long) fibers or discontinuous (short) fibers. Generally, CMC names include a combination of type of fiber/type of matrix. For example, C/C stands for carbonfiber-reinforced carbon (carbon/carbon), or C/SiC for carbon-fiber-reinforced silicon carbide. Sometimes the manufacturing process is included, and a C/SiC composite manufactured with the liquid polymer infiltration (LPI) process (see below) is abbreviated as LPI-C/SiC.
METAL MATRIX COMPOSITE Metal Matrix Composites (MMCs) are increasingly found in the automotive industry. They consist of a metal such as aluminium as the matrix, and a reinforcement that could be continuous fibres such as silicon carbide, graphite or alumina, wires such as tungsten, beryllium, titanium and molybdenum, and discontinuous materials. Metals containing ceramic particles, whiskers or (short or long) fibers are also gaining importance. MMC are said to be materials for the demands of the future. When the demands for high thermal conductivity, reduced weight, heat dissipation, and high strength are factors for design.
19
ALUMINA AND ALUMINA-SILICA Alumina and alumina-silica (mullite) matrix composites are produced by sol-gel
method, direct metal oxidation or chemical bonding. Alumina and alumina-silica (mullite) matrix composites are used for manufacturing heat exchangers, filters for hot liquids, thermophotovoltaic burners, burner stabilizers, combustion liners of gas turbine engines.
CARBON-CARBON Carbon-Carbon Composites are fabricated by chemical vapour infiltration or infiltration methods of a matrix material into a preform prepared from carbon fibers. Carbon-Carbon Composites are used for manufacturing high performance braking systems, refractory components, hot-pressed dies, heating elements, turbojet engine components.
PARTICULATE REINFORCED MMC (PRM): Metal matrix composite with a particulate reinforcement occupying a volume fraction greater than 5% in the material (otherwise, the particulates are generally considered to be inclusions).
DISPERSOID REINFORCED MMC: Metal matrix composite with a dispersed reinforcement occupying a volume fraction greater than 5% in the material (otherwise, the material is considered to be a dispersion strengthened metal - which incidentally may form the matrix of any type of MMC, i.e., a MMC with dispersion-strengthened matrix).
20
CERMETS: A metal matrix with a three-dimensionally percolating ceramic reinforcement, typically with far more ceramic than metal (strictly speaking they contain less than 20% metal per volume and are thus not considered as MMC). According to the percolating structure of both
constituents cermets could thus be considered as both a ceramic and a metal matrix composite.
21
Particulates are the most common and cheapest reinforcement materials. These produce the isotropic property of MMCs, which shows a promising application in structural and in automobile fields. Reinforcement materials are metallic, non- metallic and ceramic materials such as; Red mud, Silicon carbide (SiC), Aluminium oxide (Al2O3), Boron nitride, Tungsten carbide, Titanium diboride, Titanium carbide, B4C, Silicon nitrate.
22
Infiltration Gas Pressure Infiltration Squeeze Casting Infiltration Pressure Die Infiltration Stir Casting
4.1.1 INFILTRATION
Infiltration is a liquid state method of composite materials fabrication, in which a preformed dispersed phase (ceramic particles, fibers, woven) is soaked in a molten matrix metal, which fills the space between the dispersed phase inclusions. The motive force of an infiltration process may be either capillary force of the dispersed phase (spontaneous infiltration) or an external pressure (gaseous, mechanical, electromagnetic, centrifugal or ultrasonic) applied to the liquid matrix phase (forced infiltration).
23
PRESSURE DIE INFILTRATION Pressure Die Infiltration is a forced infiltration method of liquid phase fabrication Metal matrix, using a Die casting technology, when a preformed dispersed phase (particles, fibers) is placed into a die (mould) which is then filled with a molten metal entering the die through a sprue and penetrating into the preform under the pressure of a movable piston (plunger).
24
Stir Casting is the simplest and the most cost effective method of liquid state fabrication. The liquid composite material is then cast by conventional casting methods and may also be processed by conventional metal forming technologies. Stir Casting is characterized by the following features:
Content of dispersed phase is limited (usually not more than 30 vol. %). Distribution of dispersed phase throughout the matrix is not perfectly homogeneous:
1. There are local clouds (clusters) of the dispersed particles (fibers); 2. There may be gravity segregation of the dispersed phase due to a difference in the densities of the dispersed and matrix phase.
Therefore the method selected for the fabrication of a component by powder metallurgy will depend on the level of performance required from the part. Many components are adequate when produced at 85-90% of theoretical full density (T.D.) whilst others require full density for satisfactory performance. Sintering is the process whereby powder compacts are heated so that adjacent particles fuse together, thus resulting in a solid article with improved mechanical strength compared to the powder compact. This fusing of particles results in an increase in the density of the part and hence the process is sometimes called densification. There are some processes such as hot isostatic pressing which combine the compaction and sintering processes into a single step. The density of the component can also change during sintering, depending on the materials and the sintering temperature. These dimensional changes can be controlled by an understanding and control of the pressing and sintering parameters, and components can be produced with dimensions that need little or no rectification to meet the dimensional tolerances. Note that in many cases all of the powder used is present in the finished product, scrap losses will only occur when secondary machining operations are necessary.
26
As with cold isostatic pressing only semi finished products are produced, either for subsequent working to smaller sizes, or for machining to finished dimensions.
27
28
Compressive strength Density Ductility Fatigue limit Flexural modulus Flexural strength Fracture toughness Hardness Plasticity (physics) Poisson's ratio
Shear modulus Shear strain Shear strength Softness Specific modulus Specific weight Tensile strength Yield strength Young's modulus
TENSILE STRESSES: Tension (or tensile) stresses develop when a material is subject to a pulling load; for example, when using a wire rope to lift a load or when using it as a guy to anchor an antenna. "Tensile strength" is defined as resistance to longitudinal stress or pulls and can be measured in pounds per square inch of cross section. Shearing stresses occur within a material when external forces are applied along parallel lines in opposite directions. Shearing forces can separate material by sliding part of it in one direction and the rest in the opposite direction. A material that is stressed repeatedly usually fails at a point considerably below its maximum strength in tension, compression, or shear. For example, a thin steel rod can be broken by hand by bending it back and forth several times in the same place; however, if the same force is applied in a steady motion (not bent back and forth), the rod cannot be broken.
29
The tendency of a material to fail after repeated bending at the same point is known as fatigue. HARDNESS Hardness is the measure of how resistant solid matter is to various kinds of permanent shape change when a force is applied. Macroscopic hardness is generally characterized by strong intermolecular bonds, but the behaviour of solid materials under force is complex; therefore there are different measurements of hardness: scratch hardness, indentation hardness, and rebound hardness. Hardness is dependent on ductility, elasticity, plasticity, strain, strength, toughness, viscoelasticity, and viscosity.
IMPACT STRENGTH The Charpy impact test, also known as the Charpy v-notch test, is a standardized high strainrate test which determines the amount of energy absorbed by a material during fracture. This absorbed energy is a measure of a given material's toughness and acts as a tool to study temperature-dependent brittle-ductile transition. It is widely applied in industry, since it is easy to prepare and conduct and results can be obtained quickly and cheaply. But a major disadvantage is that all results are only comparative. TOUGHNESS: Toughness is the property that enables a material to withstand shock and to be deformed without rupturing. Toughness may be considered as a combination of strength and plasticity. ELASTICITY: When a material has a load applied to it, the load causes the material to deform. Elasticity is the ability of a material to return to its original shape after the load is removed. Theoretically, the elastic limit of a material is the limit to which a material can be loaded and still recover its original shape after the load is removed.
30
PLASTICITY: Plasticity is the ability of a material to deform permanently without breaking or rupturing. This property is the opposite of strength. By careful alloying of metals, the combination of plasticity and strength is used to manufacture large structural members. For example, should a member of a bridge structure become overloaded, plasticity allows the overloaded member to flow allowing the distribution of the load to other parts of the bridge structure. BRITTLENESS: Brittleness is the opposite of the property of plasticity. A brittle metal is one that breaks or shatters before it deforms. White cast iron and glass are good examples of brittle material. Generally, brittle metals are high in compressive strength but low in tensile strength. As an example, you would not choose cast iron for fabricating support beams in a bridge. DUCTILITY AND MALLEABILITY: Ductility is the property that enables a material to stretch, bend, or twist without cracking or breaking. This property makes it possible for a material to be drawn out into a thin wire. In comparison, malleability is the property that enables a material to deform by compressive forces without developing defects. A malleable material is one that can be stamped, hammered, forged, pressed, or rolled into thin sheets.
31
THERMAL CONDUCTIVITY: Thermal conductivity, k, is the property of a material's ability to conduct heat. It appears primarily in Fourier's Law for heat conduction. Heat transfer across materials of high thermal conductivity occurs at a faster rate than across materials of low thermal conductivity. Correspondingly materials of high thermal conductivity are widely used in heat sink applications and materials of low thermal conductivity are used as thermal insulation. Thermal conductivity of materials is temperature dependent. In general, materials become more conductive to heat as the average temperature increases. The reciprocal of thermal conductivity is thermal resistivity. DENSITY The density of a material is given by the ratio of mass per unit volume. The density of MMC varies due to infiltration of Red mud in to the Aluminium alloy. The density of a material can be found using Archimedes principle which states that the weight of the displaced fluid is directly proportional to the volume of the displaced fluid (if the surrounding fluid is of uniform density). In simple terms, the principle states that the buoyant force on an object is going to be equal to the weight of the fluid displaced by the object, or the density of the fluid multiplied by the submerged volume times the gravitational constant, g. Thus, among completely submerged objects with equal masses, objects with greater volume have greater buoyancy.
32
the reinforcement. Non-uniform distributions of reinforcement in the early stages of processing was observed to persist to the final product in the forms of streaks or clusters of uninfiltrated reinforcement with their attendant porosity, all of which lowered ductility, strength and toughness of the material.
FRACTURE The fracture behaviour of MMCs has been identified not only for extending their applications but also for improving mechanical properties, especially strength and ductility. Better understandings of the underlying mechanisms affecting composite properties are essential if the properties of the composite material are to be improved. Tensile fracture of conventional alloys is considered in terms of the micro void coalescence model (MVC). Void nucleation in unreinforced alloys occurs at constituent particles, either through particle failure, through interface decohesion. Decohesion is most common, but particle cracking occurs with elongated particles. In composites, there are three possible mechanisms for void nucleation particle cracking, interface decohesion, and matrix void nucleation is the same mechanism as occurs in the unreinforced alloys
MICROSTRUCTURE The most important aspects of the microstructure is the distribution of the reinforcing particles, and this depends on the processing and fabrication routes involved. The oxides of reinforcing particles used in the composites have a varying density. Density of the particles is one of the important factors determining the distribution of the particles in molten metal. Particles having higher density than molten metal can settle at the bottom of the bath slowly and particles of lower density can segregate at the top. During subsequent pouring of the composite melt, the particle content may vary from one casting to another or even it can vary in the same casting from one region to another. Therefore uniform distribution of the particles in the melt is a necessary condition for uniform distribution of particles in the castings. The properties of composites are finally dependent on the distribution of the particles. Hence the study of the distribution of the particles in the composite is of great significance. Several investigators have examined the fracture samples of different metal matrix composites; it was observed that the fracture occurred mainly through the matrix in a ductile manner.
34
A number of different wear phenomena are also commonly encountered and presented in the literature. Impact-, cavitations-, diffusive- and corrosive- wear are all such examples. These wear mechanisms, however, do not necessarily act independently and wear mechanisms are not mutually exclusive. "Industrial Wear" are commonly described as incidence of multiple wear mechanisms occurring in unison. Another way to describe "Industrial Wear" is to define clear distinctions in how different friction mechanisms operate, for example distinguish between mechanisms with high or low energy density. Wear mechanisms and/or sub-mechanisms frequently overlap and occur in a synergistic manner, producing a greater rate of wear than the sum of the individual wear mechanisms.
35
ADHESIVE WEAR
Adhesive wear can be found between surfaces during frictional contact and generally refers to unwanted displacement and attachment of wear debris and material compounds from one surface to another. Two separate mechanisms operate between the surfaces. 1. Adhesive wear are caused by relative motion, "direct contact" and plastic deformation which create wear debris and material transfer from one surface to another. 2. Cohesive adhesive forces, holds two surfaces together even though they are separated by a measurable distance, with or without any actual transfer of material. The above description and distinction between "adhesive wear" and its counterpart "cohesive adhesive forces" are quite common. Usually cohesive surface forces and adhesive energy potentials between surfaces are examined as a special field in physic departments. The adhesive wear and material transfer due to direct contact and plastic deformation are examined in engineering science and in industrial research. Two aligned surfaces may always cause material transfer and due to overlaps and symbiotic relations between relative motional wear and chemical cohesive attraction. Generally, adhesive wear occurs when two bodies slide over or are pressed into each other, which promote material transfer. This can be described as plastic deformation of very small fragments within the surface layers. The asperities or microscopic high points or surface roughness found on each surface, define the severity on how fragments of oxides are pulled off and adds to the other surface, partly due to strong adhesive forces between atoms but also due to accumulation of energy in the plastic zone between the asperities during relative motion. The outcome can be a growing roughening and creation of protrusions (i.e., lumps) above the original surface, in industrial manufacturing referred to as galling , which eventually breaches the oxidized surface layer and connects to the underlying bulk material which enhance the possibility for a stronger adhesion and plastic flow around the lump. The geometry and the nominal sliding velocity of the lump defines how the flowing material will be transported and accelerated around the lump which is critical to define contact pressure and developed temperature during sliding. The mathematical function for acceleration of flowing material is thereby defined by the lumps surface contour.
36
Its clear, given these prerequisites, that contact pressure and developed temperature is highly dependent on the lumps geometry. Flow of material exhibits an increase in energy density, because initial phase transformation and displacement of material demand acceleration of material and high pressure. Low pressure is not compatible with plastic flow; only after deceleration may the flowing material be exposed to low pressure and quickly cooled. In other words, you cant deform a solid material using direct contact without applying a high pressure and somewhere along the process must acceleration and deceleration take place, i.e., high pressure must be applied on all sides of the deformed material. Flowing material will immediately exhibit energy loss and reduced ability to flow due to phase transformation, if ejected from high pressure into low pressure. This ability withholds the high pressure and energy density in the contact zone and decreases the amount of energy or friction force needed for further advancement when the sliding continues and partly explain the difference between the static and sliding coefficient of friction () if the main fracture mechanisms are equal to the previous. Adhesive wear is a common fault factor in industrial applications such as sheet metal forming (SMF) and commonly encountered in conjunction with lubricant failures and are often referred to as welding wear or galling due to the exhibited surface characteristics, phase transition and plastic flow followed by cooling. The type of mechanism and the amplitude of surface attraction vary between different materials but are amplified by an increase in the density of surface energy. Most solids will adhere on contact to some extent. However, oxidation films, lubricants and contaminants naturally occurring generally suppress adhesion and spontaneous exothermic chemical reactions between surfaces generally produce a substance with low energy status in the absorbed species.
ABRASIVE WEAR
Abrasive wear occurs when a hard rough surface slides across a softer surface. ASTM (American Society for Testing and Materials) defines it as the loss of material due to hard particles or hard protuberances that are forced against and move along a solid surface. Abrasive wear is commonly classified according to the type of contact and the contact environment. The type of contact determines the mode of abrasive wear. The two modes of abrasive wear are known as two-body and three-body abrasive wear. Two-body wear occurs when the grits or hard particles remove material from the opposite surface. The common analogy is that of material being removed or displaced by a cutting or plowing operation.
37
Three-body wear occurs when the particles are not constrained, and are free to roll and slide down a surface. The contact environment determines whether the wear is classified as open or closed. An open contact environment occurs when the surfaces are sufficiently displaced to be independent of one another There are a number of factors which influence abrasive wear and hence the manner of material removal. Several different mechanisms have been proposed to describe the manner in which the material is removed. Three commonly identified mechanisms of abrasive wear are: 1. Plowing 2. Cutting 3. Fragmentation Plowing occurs when material is displaced to the side, away from the wear particles, resulting in the formation of grooves that do not involve direct material removal. The displaced material forms ridges adjacent to grooves, which may be removed by subsequent passage of abrasive particles. Cutting occurs when material is separated from the surface in the form of primary debris, or microchips, with little or no material displaced to the sides of the grooves. This mechanism closely resembles conventional machining. Fragmentation occurs when material is separated from a surface by a cutting process and the indenting abrasive causes localized fracture of the wear material. These cracks then freely propagate locally around the wear groove, resulting in additional material removal by spalling.
SURFACE FATIGUE
Surface fatigue is a process by which the surface of a material is weakened by cyclic loading, which is one type of general material fatigue. Fatigue wear is produced when the wear particles are detached by cyclic crack growth of micro cracks on the surface. These micro cracks are either superficial cracks or subsurface cracks.
FRETTING WEAR
Fretting wear is the repeated cyclical rubbing between two surfaces, which is known as fretting, over a period of time which will remove material from one or both surfaces in contact. It occurs typically in bearings, although most bearings have their surfaces hardened to resist the problem. Another problem occurs when cracks in either surface are created, known as fretting fatigue. It is the more serious of the two phenomena because it can lead to
38
catastrophic failure of the bearing. An associated problem occurs when the small particles removed by wear are oxidised in air. The oxides are usually harder than the underlying metal, so wear accelerates as the harder particles abrade the metal surfaces further. Fretting corrosion acts in the same way, especially when water is present. Unprotected bearings on large structures like bridges can suffer serious degradation in behaviour, especially when salt is used during winter to deice the highways carried by the bridges.
EROSIVE WEAR
Erosive wear can be described as an extremely short sliding motion and is executed within a short time interval. Erosive wear is caused by the impact of particles of solid or liquid against the surface of an object. The impacting particles gradually remove material from the surface through repeated deformations and cutting actions. It is a widely encountered mechanism in industry. A common example is the erosive wear associated with the movement of slurries through piping and pumping equipment. The rate of erosive wear is dependent upon a number of factors. The material characteristics of the particles, such as their shape, hardness, and impact velocity and impingement angle are primary factors along with the properties of the surface being eroded. The impingement angle is one of the most important factors and is widely recognized in literature. For ductile materials the maximum wear rate is found when the impingement angle is approximately 30, whilst for non ductile materials the maximum wear rate occurs when the impingement angle is normal to the surface.
39
40
6.1. BACKGROUND
The original inspiration for the term Artificial Neural Network came from examination of central nervous systems and their neurons, axons, dendrites, and synapses, which constitute the processing elements of biological neural networks investigated by neuroscience. In an artificial neural network, simple artificial nodes, variously called "neurons", "neurodes", "processing elements" (PEs) or "units", are connected together to form a network of nodes mimicking the biological neural networks hence the term "artificial neural network. Because neuroscience is still full of unanswered questions, and since there are many levels of abstraction and therefore many ways to take inspiration from the brain, there is no single formal definition of what an artificial neural network is. Generally, it involves a network of simple processing elements that exhibit complex global behaviour determined by connections between processing elements and element parameters. While an artificial neural network does not have to be adaptive per se, its practical use comes with algorithms designed to alter the strength (weights) of the connections in the network to produce a desired signal flow. These networks are also similar to the biological neural networks in the sense that functions are performed collectively and in parallel by the units, rather than there being a clear delineation of subtasks to which various units are assigned. Currently, the term Artificial Neural Network (ANN) tends to refer mostly to neural network models employed in statistics, cognitive psychology and artificial intelligence.
41
Neural network models designed with emulation of the central nervous system (CNS) in mind are a subject of theoretical neuroscience and computational neuroscience. In modern software implementations of artificial neural networks, the approach inspired by biology has been largely abandoned for a more practical approach based on statistics and signal processing. In some of these systems, neural networks or parts of neural networks (such as artificial neurons) are used as components in larger systems that combine both adaptive and non-adaptive elements. While the more general approach of such adaptive systems is more suitable for real-world problem solving, it has far less to do with the traditional artificial intelligence connectionist models. What they do have in common, however, is the principle of non-linear, distributed, parallel and local processing and adaptation.
42
From this model the interval activity of the neuron can be shown to be:
The output of the neuron, yk, would therefore be the outcome of some activation function on the value of vk.
43
Secondly, there is the Piecewise-Linear function. This function again can take on the values of 0 or 1, but can also take on values between that depending on the amplification factor in a certain region of linear operation.
Thirdly, there is the sigmoid function. This function can range between 0 and 1, but it is also sometimes useful to use the -1 to 1 range. An example of the sigmoid function is the hyperbolic tangent function.
The artificial neural networks which we describe are all variations on the parallel distributed processing (PDP) idea. The architecture of each neural network is based on very similar building blocks which perform the processing and is shown in figure 6.2
44
45
6.5 LEARNING
What has attracted the most interest in neural networks is the possibility of learning. Given a specific task to solve, and a class of functions, learning means using a set of observations to find f*f which solves the task in some optimal sense. This entails defining a cost function C: FR such that, for the optimal solution f*, C (f*) C (f) f F, (i.e., no solution has a cost less than the cost of the optimal solution).The cost function is an important concept in learning, as it is a measure of how far away a particular solution is from an optimal solution to the problem to be solved. Learning algorithms search through the solution space to find a function that has the smallest possible cost. There are three major learning paradigms, each corresponding to a particular abstract learning task. These are supervised learning, unsupervised learning and reinforcement learning.
46
6.8 APPLICATIONS
The utility of artificial neural network models lies in the fact that they can be used to infer a function from observations. This is particularly useful in applications where the complexity of the data or task makes the design of such a function by hand impractical. The tasks artificial neural networks are applied to tend to fall within the following broad categories: Function, or analysis, including time series prediction, fitness approximation and modeling. Classification, including pattern and sequence recognition, novelty detection and sequential decision making. Application areas include system identification and control (vehicle control, process control), quantum chemistry, game-playing and decision making (backgammon, chess, racing), pattern recognition (radar systems, face identification, object recognition and more), sequence recognition (gesture, speech, handwritten text recognition), medical diagnosis, financial applications (automated trading systems), data mining (or knowledge discovery in databases, "KDD"), visualization and e-mail spam filtering.
47
6.9 TYPES OF ARTIFICIAL NEURAL NETWORKS An artificial neural network is a computational simulation of a biological neural network. These models mimic the real life behaviour of neurons and the electrical messages they produce between input, processing by the brain and the final output from the brain. The systems can be hardware and software based specifically built systems or purely software based and run in computer models.
o Feed forward neural network o Radial basis function (RBF) network o Kohonen self-organizing network o Learning Vector Quantization o Recurrent neural network
48
49
SPECIFICATION DC Motor
Make Model Speed : : : Crompton Greaves Commercial Manufacturer JLG52586 1400 rpm
SPECIFICATIONS
Make Model Maximum Load : : : SE Udyog Private Ltd., B/3000/8 3000 kgf
SPECIFICATIONS
Make Model Bed length : : : Sona Industries PL4 Lathe 42
1
51
by magnum engineers is primarily intended for determining the Tribological characteristics of wide range of materials under conditions of various normal loads & temperatures. A stationary pin mounted on a pin holder is brought into contact against a rotating disc at a specified speed as the pin is sliding, resulting frictional force acting between the pin and disc are measured by arresting the deflecting pin holder against a load cell. Both normal load and speed can be set as desired.
SPECIFIACTION
Make Normal load range Frictional force range Wear measurement range Pin length Wear Disc material : : : : : : Magnum engineers up to 200N up to 200N with a resolution of 1N with tare facility 0-4mm with tare facility 25-30mm EN32 Steel
52
SPECIFICATION Resolution Magnification Display Filament Accelerating voltage 3.0nm X5 to 300,000 20 inch, high resolution FPD Pre-centered W hairpin filament 0.5 to 30 kv
53
The processing of Aluminium Red mud metal matrix composite involves various step by step processes. Each and every step was planned in the aspect of safety, accuracy and cost. The steps to be carried out are shown in the flow chart below.
FABRICATION
COKE FEEDING SPEED SETTING DIE PREPARATI ON
MATERIAL SELECTION
SIZING OF SPECIMENS
Wear charecteristi cs of Al RM Composite is optimized using Artficial Neural Network tool in MATLab
EXPERIMENTAL PROCEDURE
COKE FEEDING MELTING OF ALUMINIUM PRE HEATING OF RED MUD SOLIDIFICATION IN AIR PROCESS DIMENSIONING THE SPECIMEN
54
Table 8.1 CHEMICAL COMPOSITION OF Al LM25 Al 98.45 Si 0.7 Fe 0.5 Mg 0.40 Mn 0.3 Cu 0.2 Ti 0.2 Ni 0.1 Zn 0.1 Pb 0.1 Sn 0.05
Table 8.2 MECHANICAL PROPERTIES OF ALUMINIUM LM25 Density 0.2% Proof Stress (N/mm2) Tensile stress (N/mm ) Elongation (0%) Brinell Hardness Number Endurance Limit (5 X 108 Cycles + N/mm2) Modulus of elasticity ( X 103 N/mm2) 71
2
55
carbide). Here selected reinforcement material is Red Mud which posses very heavy/ dense having low porosity. It is beyond doubt that activity of primary industries often yields substantial amounts of by-products. The disposal in the original industrial site is favoured by economic reasons though traditional storage in nearby dumps can be impractical owing to the considerable masses involved and environmental restrictions. The local exploitation of these by-products is therefore a growing technological aspect of basic industries and one tenable option is their reuse as starting materials for other productions.
This huge amount of industrial by-products / wastes which is becoming a client for increasing environmental pollution & generation of a huge amount of unutilized resources. An emblematic case is the red mud discharged by industry producing alumina from bauxite: alkaline digestion of 2.5 t of bauxite affords alumina and 1.5 t of red mud. The chosen Red Mud was in the size of 150 microns, and was bought from Madras Aluminium Company Ltd., (MALCO) The red mud finds good properties to be used as the reinforcement material. Some of the advantages are Mechanical compatibility (a thermal expansion coefficient which is low but adapted to the matrix), Chemical compatibility, High Youngs modulus, High compression and tensile strength, Good process ability, economic efficiency. Thermal stability,
56
CHEMICAL COMPOSITION OF RED MUD The X-Ray diffraction image of the selected Red Mud is studied and the composition of the RM were listed out
Fig 8.2 XRD Image of Red mud Table 8.3: Chemical Composition of Red Mud Constituents Al2O3 TiO2 Na2O P2O5 Ga2O3 Zn Organic C % Weight 15.0 3.7 4.8 0.67 0.096 0.018 0.088 Constituents Fe2O3 SiO2 CaO V2O5 Mn Mg L.O.I % Weight 54.8 8.44 2.5 0.38 1.1 0.056 Balance
57
The fabrication of Al RM metal matrix composite requires certain pre processing in order to make the process more effective and legible. The processes involved are explained briefly.
The aluminum pieces were sized to the requirement i.e. to full fill the weight combination criteria. After sizing and weighing the raw material it is need to be cleaned for impurities. Aluminium pieces were washed in the bath of Sodium Hydroxide solution (NaOH) for 10 minutes. The quantity of the bath was 20ml in a glass beaker. The Red mud was crushed in Ball mill for about two hours in order to get the even sizing of the material. Then the milled red mud was sieved using three different sieves such as 150 microns, 90 microns and 75 microns. The sieved red mud were taken and the RM with 150 microns were taken for further processing
58
Table 9.1 Combination of Raw materials S No. 1 2 3 4 5 Combination In Terms of Percentage Al 100 95 90 85 80 RED MUD 0 5 10 15 20 Combination In terms of Weight (gm) Al 1000 950 900 850 800 RED MUD 0 50 100 150 200
60
overall mechanical properties of MMC. Also, when more than one particle is considered, the particles are generally assumed to be the uniform random spatial arrangement and identical shape. In reality, the particle microstructure is quite complex.
63
64
Experiments have been conducted in the Pin-on-disc type Friction and Wear monitor Pin On Disc Friction & Wear Testing Machine (19238622)with data acquisition system, which was used to evaluate the wear behaviour of the composite, against hardened ground steel disc (En32) having hardness 65 HRC and surface roughness (Ra) 0.5 m. It is versatile equipment designed to study wear under sliding condition only. Sliding generally occurs between a stationary Pin and a rotating disc. The disc rotates with the help of a D.C. motor; having speed range 0-2000 rev/min with wear track diameter 10-140 mm which could yield sliding speed 0.26 to 10m/s. Load is to be applied on pin (specimen) by dead weight through pulley string arrangement. The system has a maximum loading capacity of 200N. The tests have been carried out under the following conditions: The specimens under tests were fixed to the collect. The collect along with the specimen (Pin) is positioned at a particular track diameter 90mm. This track diameter is to be changed after each tests i.e. a fresh track is to be selected for each specimen. During experiment the specimens remains fixed and disc rotates. Load is applied through a dead weight loading system to press the pin against the disc. Frictional force arises at the contact can be read out from the controller. The speed of the disc or motor rpm can be varied through the controller. For a particular type of composite 27 sets of test pieces were tested. Each set of test was carried out for a period of 6 hrs run. After each one hour run the test pieces were removed from the machine and weighted accurately to determine the loss in weight.
65
The conclusions drawn from this study are Pure aluminium matrix is preferred to various alloy matrices due to the high temperature stability of the aluminium as compared with aluminium alloys. Lower working temperatures in case of alloy matrices is attributed to lower stability of the alloy matrix and coarsening of the grains. In addition, the load transfer in case of pure aluminium matrix is more effective due to the clean interface. There exists a wide range of database in the literature for different types of reinforcements in Aluminium Metal Matrix Composites. In particle reinforced composites, the fracture mode was observed to depend on reinforcement purity, reinforcement particle size, and nature of interface, volume fraction of reinforcement, fabrication route adopted, and extent of hot working, presence of any intermetallic precipitates and extent of coherency of second phase with the matrix. There are varieties of techniques available for production of metal matrix composite. Each having its own merits and demerits.. In particular, some are far more expensive than others. The manufacturer generally prefers the lowest cost route. Therefore, stir-casting technique represents a substantial proportion of the MMCs in commercial sectors today.
Thus the priority of this work will be to prepare MMC using red mud (an industrial waste from Bayers process) as reinforcement material and to study its wear characteristics. The effect of different dependant factors primarily sliding velocity, normal load, effect of heat treatment temperature and cooling media are also to be studied.
66
Table 11.1 Hardness values of Casted specimens Load: 750 kgf Indenter Ball diameter : 5 mm S.No SPECIMEN Indentation Time : 10 Sec HARDNESS (BHN) 1 2 3 4 5 6 7 0 5 10 15 20 25 30 116.854 136.657 139.0031 162.854 169.261 172.072 175.300
Table 11.2 Density values of Casted Specimens S.No 1 2 3 4 5 6 7 SPECIMEN 0 5 10 15 20 25 30 DENSITY (g/cc) 2.68 2.96 2.98 2.99 2.96 2.95 2.97
S.No
SPECIMEN
LOAD (N)
VELOCITY (m/s) 2 3 4 2 3 4 2
67
WEIGHT Frictional LOSS (g) 0.0133 0.0268 0.0596 0.0054 0.0671 0.0627 0.0110 force(N) 2.1 6 6.2 5.3 17.8 27.4 3.7
1 2 3 4 5 6 7
Pure 5 10 15 20 25 30
30 50 70 30 50 70 30
BHN
200 180 160
Hardnesss in BHN
3.05 3 2.95 2.9 Density in g/cc 2.85 2.8 2.75 2.7 2.65 2.6 2.55 2.5 Density
10
15
% of Red Mud
20
25
30
68
Artificial Neural Network (ANN) was employed to develop mathematical model for wear prediction using Decision Prediction Tool 5.7.1. The accuracy of the developed model is 83%. The image of output obtained during the operation of Neural Network tool were given below
69
70
CHAPTER-12 12 .REFERENCE
1. Kok M. Production and mechanical properties of Al2O3 particle-reinforced 2024 aluminium alloy composites. Journal Material Processing Technology (2005); 161:381 7. 2. Degischer HP. Innovative light metals: metal matrix composites and foamed aluminium. Material Design (1997);18 :2216. 3. Rasit Koker , Necat Altinkok , Adem Demir, Neural network based prediction of mechanical properties of particulate reinforced metal matrix composites using various training algorithms, Materials and Design 28 (2007) 616627. 4. Dobrzanski LA, Wlodarczyk A, Adamiak M. The structure and properties of PM composite materials based on EN AW-2124 aluminium alloy reinforced with the BN or Al2O3 ceramic particles. J Mater Process Technology, (2006); 175: 18691. 5. Torralba JM, daCost CE, Velasco F. P/M aluminium matrix composites: an overview. J Material Processing Technology 2003-133:2036. 6. Liu HN, Ogi K. Dry sliding wear on Al2O3 continuous fibre reinforced AlCu alloy against steel counterface. J Mater Sci 1999-34:55939. 7. Moustafa SF, Soliman FA. Wear resistance of d-type alumina fibre reinforced Al4% Cu matrix composite. Tribol Lett 1997-3-3115. 8. Hossein Abdizadeh , Maziar Ashuri , Pooyan Tavakoli Moghadam , Arshia Nouribahadory , Hamid Reza Baharvandi, Improvement in physical and mechanical properties of aluminium/zircon composites fabricated by powder metallurgy method, Materials and Design, xxx (2011) xxxxxx. 9. Yusuf S-ahin, Abrasive wear behavior of SiC/2014 aluminium composite, Tribology International 43 (2010) 939943.
71
10. Mehdi Rahimian, Nader Parvin, Naser Ehsani, The effect of production parameters on microstructure and wear resistance of powder metallurgy AlAl2O3 composite, Materials and Design 32 (2011) 10311038.
11. Mehdi Rahimian, Nader Parvin, Naser Ehsani, The effect of particle size, sintering temperature and sintering time on the properties of AlAl2O3 composites, made by powder metallurgy, Journal of Materials Processing Technology 209 (2009) 53875393. 12. Mazahery A, Abdizadeh H, Baharvandi HR. Development of high-performance A356/nano-Al2O3 composites. Mater Sci Eng A 2009;518:614. 13. Ansary Yar A, Montazerian M, Abdizadeh H, Baharvandi HR. Microstructure and mechanical properties of aluminium alloy matrix composite reinforced with nanoparticle MgO. J Alloy Compd 2009;484:4004.
14. Ansary Yar A, Montazerian M, Abdizadeh H, Baharvandi HR. Microstructure and mechanical properties of aluminium alloy matrix composite reinforced with nanoparticle MgO. J Alloy Compd 2009;484:4004. 15. Sahin Y, Murphy S. The effect of fibre orientation of the dry sliding wear of borsicreinforced 2014 aluminium alloy. J Mater Sci 1996;34:5399407. 16. Metals handbook, powder metallurgy. 9th ed. vol. 7. American Society for Metals; 1993. 17. Sahin Y. Preparation and some properties of SiC particle reinforced aluminium alloy composites. Mater Des 2003; 24:6719.
72
CHAPTER-13 ANNEXURE
List of Publications: This project work was presented in the National level students conference on DESIGN, MATERIAL & CONSTRUCTION on 25th & 26th August 2011 conducted by VEL TECH DR.RR & DR.SR TECHNICAL UNIVERSITY, Avadi, Chennai. We were awarded with the First best paper award, under the stream MECHANICAL.
73
CHAPTER 14 CONCLUSION Form the experimentation; it was found that while using low particle size reinforcement material the possibility of float or tend to sink will be more depends upon their density liquid metal and so that dispersion of the particles are not uniform. Therefore it is decided to use different stirrer model with varying speed and timing. Finally it is decided to use four blades with 90 degree angle, stirring speed 550 rpm and time is 60 sec to get proper distribution of the reinforcement material. Red mud, the waste generated from alumina plant can be successfully used as a reinforcing material to produce Metal-Matrix Composite (MMC) component in aluminum matrix to be used in wear environment. It can be successfully used in place of conventional aluminum intensive material. Increase in % of reinforcement of the material increases the hardness of the work piece, since reinforcement material harder than the matrix material. The density of the composite will obviously increases since increase in reinforcement increases the density of the material as per the rule of mixture. The wear rate of the composite decrease with increases in % of reinforcement materials. Finally, the wear property of the composite depends on many factors, such as sliding velocity, sliding distance and load. Computation through neural networks is one of the recently growing areas of artificial intelligence. Neural networks are promising due to their ability to learn highly non-liner relationship. It can also be gainfully employed to simulate property-parameters correlation ship in a space larger than the experimental domain. It is evident from the present study that the artificial neural technique has the potential to predict and analyze the wear behavior of metal matrix composites if it is properly trained.
74