Documente Academic
Documente Profesional
Documente Cultură
Mesa Tactical is a manufacturer of tactical shotgun accessories for the professional operator. After starting out with telescoping shotgun stock systems in 2004, our SureShell shotshell carriers are rapidly becoming standard equipment among US law enforcement agencies. Our products are made in the USA of high quality materials. Mesa Tactical warrants that all products are free from defective material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of a product that proves defective by reason of improper workmanship or materials without charge for parts and labor.
WHATS NEW
We continue to expand our line of Urbino Tactical stocks for Benelli and Remington shotguns. By teaming with California-based Freedom Fighter Tactical, we are now able to offer complete stock and forend sets in coyote color for the Benelli M4. We are also offering Riser Ready versions of the Benelli M4 stock: ready to accept a cheek riser, but with the cheek riser sold separately (see page 4). Ever since we introduced our Saddle Mount SureShell carriers for the Remington platform, Mossberg owners have been beseeching us for integrated rail and shell carrier assemblies for Mossberg 500 and Mossberg 590 shotguns. We finally obliged them with our new SureShell Carrier and Rail for Mossberg 500 (see page 13). We are also responding to what we perceive as the increasing use of H&K style (dog leash) sling hooks by producing hook loops that replace the rear sling loops on Benelli tactical stocks (page 27) and the Urbino Tactical stocks(page 29), as well as versions for Benelli and Vang Comp magazine extensions (page 26). Meanwhile, we have finally retired our Low-tube stock adapters, as well as stock adapters for the Winchester 1300.
HOW TO ORDER
For the best service, purchases should be made through an authorized Mesa Tactical dealer in your local area or on the Internet. Please give us a call at 949642-3337 or visit our website to see if there is a dealer near you. We can also accommodate credit card sales and international orders by phone or by fax at 949642-3339. Products marked with a triangle () cannot be exported without a US State Department export license. We offer a liberal test and evaluation (T&E) program for law enforcement and military customers. Simply mail or fax us a T&E product request on department letterhead and we will send you the items you request for a limited time test. In the listings, Rem 870 typically refers to all Remington shotgun platforms, including the Remington 1100 and Remington 11-87 (except telescoping stock kits or PGO adapters, which do not fit on semi-automatic shotguns; or right-side mount SureShell carriers, which would interfere with the semi-auto operating handle).
2 Mesa Tactical Catalog #16
CONTENTS
Urbino Tactical Stock System ........................................................................... 4 Telescoping Stock and Adapter Kits ................................................................ 6 Telescoping Stock Adapter and Stock Kits......................................................7 Hydraulic recoil buffer ....................................................................................7 Butt Pads and recoil buffers ............................................................................8 PGO breaching grips .......................................................................................9 SureShell Shotshell Carriers ....................................................................... 10 Receiver Mount SureShell Shotshell Carriers...............................................10 Remington .............................................................................................10 Side mount ....................................................................................10 Saddle mount ................................................................................11 Mossberg ................................................................................................13 Side mount ....................................................................................13 Shell carrier with rail ....................................................................13 Benelli ....................................................................................................14 Side mount ....................................................................................14 Shell carrier with rail ....................................................................14 Stock mount ..................................................................................15 FN SLP ...................................................................................................16 M4 SOPMOD Buttstock Mount SureShell Shotshell Carriers ....................16 SureShell Shotshell Carriers for the Urbino Tactical stock..........................17 Adapter Mount SureShell Shotshell Carriers ...............................................17 Barrel and Magazine Clamps ......................................................................... 18 Picatinny Rails ................................................................................................. 19 Receiver mount Picatinny rails .....................................................................19 Remington saddle rails ..........................................................................19 Remington side-mount rail ..................................................................20 Rails for drilled and tapped receivers ...................................................21 Adapter Mount Picatinny Rails.....................................................................22 Sling Loop and Hook Loop Solutions ........................................................... 23 Receiver Mount Sling Loops and Hook Loops.............................................23 Remington .............................................................................................23 Receiver-back Hook Loops ...........................................................24 Mossberg ................................................................................................24 Benelli ....................................................................................................25 Magazine Cap Sling Loops and Hook Loops ...............................................25 Magazine Extension Hook Loops .................................................................26 Rear Hook Loops for Benelli Tactical Stocks................................................27 Adapter Mount Sling Loops and Hook Loops .............................................27 Adapter Pocket Sling Loops and Hook Loops for Remington 870 .............28 Pocket Sling Loops and Hook Loops for Urbino Tactical stocks ................28 Rear Hook Loops for Urbino Tactical stocks ...............................................29 Gear and Accessories ..................................................................................... 30 Operators Caps .............................................................................................30 Tee Shirts ........................................................................................................31
1760 Monrovia Ave, #B1, Costa Mesa, CA 92627 Tel: 949-642-3337 Fax: 949-642-3339
www.mesatactical.com
#91550 Urbino Tactical Stock for Remington (Cheek Riser, Limbsaver, 12-GA)
Developed to meet the needs of law enforcement and military operators, the rugged Urbino Tactical stock features a tactical 12 inch length of pull (LoP), Santoprene rubber grip, optional Limbsaver butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options. The reduced LoP makes the Urbino the first truly tactical stock for the Benelli shotguns. A shorter stock is necessary for use in tactical applications, especially with body armor. The Urbino Tactical stock is durable, easy to shoulder and will not slip. The Urbino Tactical stock is also comfortable, thus reducing operator fatigue, especially during prolonged training and qualification sessions. The Santoprene grip is padded at the rear to reduce recoil impact against the web of the operators hand, and the optional Limbsaver buttpad substantially reduces felt recoil. The field-adjustable cheek riser was developed to provide superior cheek weld when using optics. The cheekpiece snaps onto rails molded into the sides of specially equipped Urbino stock armatures. In the event of optics failure, the cheek riser can be quickly removed or readjusted to a lower level. Specially-developed SureShell shotshell carriers can be fitted to the cheek riser (see page 17). While rail-equipped Urbino stocks can be used without the cheekpiece, cheek risers cannot be fitted to stocks that do not have the rails. All Urbino Tactical stocks are made in the USA, and include Benelli#91460 style rear sling loops for 1 inch sling Urbino Tactical Stock for Ben M4 (Limbsaver, 12-GA, Black) webbing. In addition, a hole at the lower rear of the stock accepts QD style sling swivels (not included). Urbino Tactical stocks can also be fitted with any of a variety of optional steel pocket sling mounts similar to those offered for our Remington telescoping stock adapters. Pocket sling loops, hook loops and push-button sling swivel mounts that fit securely between the Urbino stock and the shotgun receiver are listed on page 28. Urbino Tactical stocks for the Benelli M4 are available in black or coyote color. We also offer US-made forend halves from Freedom Fighter Tactical that match the coyote colored Urbino Tactical stocks. These forends can be purchased separately or as part of our new stock and forend sets. Riser Ready Urbino Tactical stocks, available for the Benelli M4, feature cheek riser stock armatures without the cheek risers. Cheek risers can be purchased separately at any time and fitted to Riser Ready stocks.
4 Mesa Tactical Catalog #16
#92740 Urbino Tactical Stock and Forend for Ben M4 (Riser, Standard Butt, 12-GA, Coyote)
ORDERING INFORMATION
Part No Item .........................................................................................................................................................MSRP
90070 90080 91540 91550 90050 90060 91500 91510 90030 90040 91460 91470 91650 91660 90090 90100 91580 91590 92730 92740 92750 92760 92410 92420 92430 92440
Urbino Tactical Stock for Remington (Standard Butt, 12-GA, Black) ......................................100.00 Urbino Tactical Stock for Remington (Riser, Standard Butt, 12-GA, Black) ...........................130.00 Urbino Tactical Stock for Remington (Limbsaver, 12-GA, Black) ............................................. 125.00 Urbino Tactical Stock for Remington (Riser, Limbsaver, 12-GA, Black) ...................................155.00 Urbino Tactical Stock for Ben M1/M2 (Standard Butt, 12-GA, Black) .....................................115.00 Urbino Tactical Stock for Ben M1/M2 (Riser, Standard Butt, 12-GA, Black) ..........................145.00 Urbino Tactical Stock for Ben M1/M2 (Limbsaver, 12-GA, Black) .............................................140.00 Urbino Tactical Stock for Ben M1/M2 (Riser, Limbsaver, 12-GA, Black) ..................................170.00 Urbino Tactical Stock for Ben M4 (Standard Butt, 12-GA, Black) .............................................115.00 Urbino Tactical Stock for Ben M4 (Riser, Standard Butt, 12-GA, Black) ..................................145.00 Urbino Tactical Stock for Ben M4 (Limbsaver, 12-GA, Black) .....................................................140.00 Urbino Tactical Stock for Ben M4 (Riser, Limbsaver, 12-GA, Black) ..........................................170.00 Urbino Tactical Stock for Ben M4 (Riser Ready, Standard Butt, 12-GA, Black) .....................120.00 Urbino Tactical Stock for Ben M4 (Riser Ready, Limbsaver, 12-GA, Black) ............................145.00 Urbino Tactical Stock for Ben M4 (Standard Butt, 12-GA, Coyote) .........................................125.00 Urbino Tactical Stock for Ben M4 (Riser, Standard Butt, 12-GA, Coyote) ..............................155.00 Urbino Tactical Stock for Ben M4 (Limbsaver, 12-GA, Coyote) ..................................................150.00 Urbino Tactical Stock for Ben M4 (Riser, Limbsaver, 12-GA, Coyote).......................................180.00 Urbino Tactical Stock and Forend for Ben M4 (Standard Butt, 12-GA, Coyote) ................165.00 Urbino Tactical Stock and Forend for Ben M4 (Riser, Standard Butt, 12-GA, Coyote) .....195.00 Urbino Tactical Stock and Forend for Ben M4 (Limbsaver, 12-GA, Coyote) .........................190.00 Urbino Tactical Stock and Forend for Ben M4 (Riser, Limbsaver, 12-GA, Coyote) ..............220.00 Urbino Tactical Stock for SuperNova (Standard Butt, 12-GA, Black) .......................................115.00 Urbino Tactical Stock for SuperNova (Riser, Standard Butt, 12-GA, Black) ............................145.00 Urbino Tactical Stock for SuperNova (Limbsaver, 12-GA, Black) ..............................................140.00 Urbino Tactical Stock for SuperNova (Riser, Limbsaver, 12-GA, Black) ...................................170.00
91690 Cheek Riser for Urbino Tactical Stock (12-GA, Black) ....................................................................30.00 90570 Replacement Forend for Benelli M4 (12-GA, Coyote) ....................................................................50.00
www.mesatactical.com
LEO: LEO adapters feature a factory stock elevation for use with receiver-mounted sights or no sights at all. While all adapters are designed for installation on 12 gauge shotguns, the LEO Telescoping Stock Adapter for Remington 870 can also be fitted to 20 gauge Remington 870s.
91250 LEO Telescoping Stock Adapter for Rem 870 ..................................................................................70.00 91260 LEO Telescoping Stock Kit for Rem 870 ...........................................................................................190.00 92230 LEO Telescoping Recoil Stock Kit for Rem 870 ..............................................................................325.00 93170 LEO Telescoping Stock Adapter for Moss 500 ..................................................................................75.00 93180 LEO Telescoping Stock Kit for Moss 500 ...........................................................................................195.00 93220 LEO Telescoping Recoil Stock Kit for Moss 500..............................................................................330.00
www.mesatactical.com
High-tube: High-tube kits and adapters are designed for rail-mounted optics; all High-tube kits include a top Picatinny rail. Mossberg 500 kits are available with adapter-mount rail or receiver mount rail. The receiver mount rail is recommended. It can be installed on post-1996 Mossberg shotguns with factory-tapped mounting holes in the top of the receiver, and allows access to the #90500 High-tube Telescoping Stock Mossberg tang safety switch. and Rail Kit for Rem 870
Part No Item
#90740 High-tube Telescoping Stock and Rail Kit for Moss 500/590 (receiver rail)
MSRP
90630 High-tube Telescoping Stock Adapter and Rail Kit for Rem 870 ............................................160.00 90500 High-tube Telescoping Stock Kit for Rem 870 ..............................................................................280.00 92290 High-tube Telescoping Recoil Stock Kit for Rem 870 .................................................................415.00 90620 90780 90490 90740 92280 92220 High-tube Telescoping Stock Adapter and Rail Kit for Moss 500 (adapter rail) ................165.00 High-tube Telescoping Stock Adapter and Rail Kit for Moss 500 (receiver rail) ................165.00 High-tube Telescoping Stock Kit for Moss 500 (adapter rail) ...................................................285.00 High-tube Telescoping Stock Kit for Moss 500 (receiver rail) ..................................................285.00 High-tube Telescoping Recoil Stock and Adapter Rail for Moss 500 ....................................420.00 High-tube Telescoping Recoil Stock and Receiver Rail for Moss 500 ...................................420.00
#90180 commercial aftermarket buttstocks. Standard Buttpad for Urbino Purchase either a complete replaceTac Stock (Coyote) ment M4 SOPMOD recoil buttstock assembly, or the drop in hydraulic buffer alone (stock nut sold separately). Additional Limbsaver and standard rubber buttpads for the Urbino Tactical stocks can also be ordered separately.
ORDERING INFORMATION
Part No Item MSRP
90450 91850 92180 92170 90520 90530 92510 92520 90180 90190 92530 92540
M4 Rubber Butt Pad ............................................................................................................................... 16.00 LimbSaver Snap-on Recoil Pad for M4 SOPMOD Buttstocks .................................................. 40.00 M4 SOPMOD Telescoping Recoil Stock (Mil-spec) ....................................................................... 180.00 ITT Enidine Shot Stock Hydraulic Buffer (Mil-spec) ..................................................................... 150.00 Standard Buttpad for Urbino Tac Stock (Black)................................................................................25.00 Limbsaver Buttpad for Urbino Tac Stock (Black) ...........................................................................50.00 Standard Buttpad for Urbino Tac Stock (Riser) (Black) ..................................................................25.00 Limbsaver Buttpad for Urbino Tac Stock (Riser) (Black) .............................................................50.00 Standard Buttpad for Urbino Tac Stock (Coyote) ............................................................................35.00 Limbsaver Buttpad for Urbino Tac Stock (Coyote) .......................................................................60.00 Standard Buttpad for Urbino Tac Stock (Riser) (Coyote) ..............................................................35.00 Limbsaver Buttpad for Urbino Tac Stock (Riser) (Coyote)..........................................................60.00
92820 PGO Adapter for Rem 870 ...................................................................................................................... 60.00 92830 PGO w/ ERGO Grip for Rem 870 ........................................................................................................... 80.00
www.mesatactical.com
#92000 SureShell Carrier and Rail for Benelli SuperNova (4-Shell, 12-GA)
Our SureShell shotshell carriers retain ammunition reliably and, being metal, can withstand the rigors of daily use and abuse. Fabricated from aircraft aluminum, they feature an innovative rubber friction retention system and tough construction to endure years of use and abuse. Since their introduction in the spring of 2005, they have rapidly become our best-selling accessories, and an emerging industry standard. SureShell carrier yokes are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. SureShell yokes are secured to application-specific brackets, and some SureShell carriers include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotguns finish. #91630
REMINGTON
Mesa Tactical offers two methods for mounting SureShell shotshell carriers to Remington 870, Remington 1100 and Remington 11-87 shotguns. Our traditional side mount SureShell carriers attach via flat aluminum brackets to the sides of the shotgun receiver. We also offer unique saddle rail SureShell carriers that combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical sights. Saddle mount shell carriers are not yet available for the Remington 887 shotgun.
SIDE MOUNT
The receiver mounting scheme of our receiver mount SureShell carriers for the Remington shotguns depends on a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons.
10 Mesa Tactical Catalog #16
#90320 SureShell Carrier for Remington 870 (4-Shell, 12-GA) (left side)
#93250 Note that SureShell shotshell carriers canSureShell Carrier for not be installed on the right side of Remington Remington 870 (6-Shell, 20-GA) semi-auto shotguns. To use a six- and eight-shot SureShell carrier mounted on the left side of the Remington 870 shotgun, you must use a tactical forend that does not overlap the receiver, or a factory forend that is cut down appropriately. SureFire forends are fully compatible with our six-shot SureShell carriers, but will need about inch shaved off the end to be installed with our eight-shot SureShell carriers. The factory forend on the Remington 887 must be cut down in any case before installing any SureShell carrier. Remington side mount SureShell carriers are available in both 12 gauge and 20 gauge models (except Remington 887).
ORDERING INFORMATION
Part No Item MSRP
SureShell Carrier for Remington (4-Shell, 12-GA) (Left Side) .....................................................65.00 SureShell Carrier for Rem 870 (4-Shell, 12-GA) (Right Side) .......................................................65.00 SureShell Carrier for Remington (6-Shell, 12-GA) ...........................................................................70.00 SureShell Carrier for Remington (8-Shell, 12-GA) ...........................................................................85.00 SureShell Carrier for Remington (4-Shell, 20-GA) (Left Side) ......................................................65.00 SureShell Carrier for Rem 870 (4-Shell, 20-GA) (Right Side) ........................................................65.00 SureShell Carrier for Remington (6-Shell, 20-GA) ...........................................................................70.00 SureShell Carrier for Remington (8-Shell, 20-GA) ...........................................................................85.00
92630 SureShell Carrier for Remington 887 (4-Shell, 12-GA) ..................................................................70.00 92640 SureShell Carrier for Remington 887 (6-Shell, 12-GA) ..................................................................75.00 92650 SureShell Carrier for Remington 887 (8-Shell, 12-GA) ..................................................................90.00
SADDLE MOUNT
Mesa Tactical Saddle Rails are aluminum brackets that wrap around the top of the shotgun receiver, with a Picatinny optics rail at the top. The factory trigger pins are replaced by an internally threaded steel pin (in the rear) and paired Chicago screws (up front), to which both sides of the saddle rail are securely bolted. SureShell Saddle Rails feature a MIL-STD-1913 (NATO STANAG 4694) Picatinny sight rail along the top, and a four-, six- or eight-shot SureShell shotshell carrier yoke on the left side of the receiver. The rail is notched at the rear to
www.mesatactical.com
#91950 SureShell Carrier and Rail for Remington w/ Barrel Clamp (6-Shell, 12-GA, 20 inch)
#91630 SureShell Carrier and Rail for Remington (6-Shell, 12-GA, 5 inch)
11
accommodate Scattergun/ #92130 SureShell Carrier and Wilson style ghost ring Rail for Remington w/ Mag Clamp sights, and extends to the (6-Shell, 12-GA, 20 inch) front of the shotgun receiver (5 inch rail), 2 inches past the front of the receiver (8 inch rail), or just beyond the barrels magazine lug (20 inch rail). The 20 inch rails are available with or without the required Magazine Clamp or Barrel Clamp. No gunsmithing is required to install the SureShell Saddle Rail, except for optional forend alterations as described above under side mount carriers. Saddle Rails are also available without the shell carriers (see page 19) Saddle mount shell carriers are not yet available for the Remington 887 shotgun.
ORDERING INFORMATION
Part No MSRP Item ...............................................................................................................................................................................................
92160 SureShell Carrier and Rail for Remington (4-Shell, 12-GA, 5 in)................................................120.00 91630 SureShell Carrier and Rail for Remington (6-Shell, 12-GA, 5 in)................................................125.00 91640 SureShell Carrier and Rail for Remington (8-Shell, 12-GA, 5 in)................................................140.00 92700 SureShell Carrier and Rail for Remington (4-Shell, 12-GA, 8 in) ...........................................135.00 92710 SureShell Carrier and Rail for Remington (6-Shell, 12-GA, 8 in) ............................................140.00 92720 SureShell Carrier and Rail for Remington (8-Shell, 12-GA, 8 in) ............................................155.00 91940 SureShell Carrier and Rail for Remington w/ Barrel Clamp (4-Shell, 12-GA, 20 in) ...........235.00 91950 SureShell Carrier and Rail for Remington w/ Barrel Clamp (6-Shell, 12-GA, 20 in) ...........240.00 91960 SureShell Carrier and Rail for Remington w/ Barrel Clamp (8-Shell, 12-GA, 20 in) ...........255.00 92120 SureShell Carrier and Rail for Remington w/ Mag Clamp (4-Shell, 12-GA, 20 in) ..............235.00 92130 SureShell Carrier and Rail for Remington w/ Mag Clamp (6-Shell, 12-GA, 20 in) ..............240.00 92140 SureShell Carrier and Rail for Remington w/ Mag Clamp (8-Shell, 12-GA, 20 in) ..............255.00 91970 SureShell Carrier and Rail for Remington (4-Shell, 12-GA, 20 in, no clamp).........................180.00 91980 SureShell Carrier and Rail for Remington (6-Shell, 12-GA, 20 in, no clamp).........................185.00 91990 SureShell Carrier and Rail for Remington (8-Shell, 12-GA, 20 in, no clamp).........................200.00
12
MOSSBERG
There are two mounting methods for SureShell carriers on the Mossberg platforms; side mount and top mount (with integrated optics rail).
SIDE MOUNT
The side mount scheme of our shotgun SureShell shotshell carriers for the Mossberg 500/590 substitutes two custom-machined steel Chicago screws for the trigger pin. At the front of the mounting plate, custom retaining steel hardware is used with an elongated extractor screw and a machined key hole in the plate. The Mossberg 930 mounting system is similar, except it uses two sets of Chicago screws in place of the two trigger pins. The mounting plate was designed not to obscure the receiver serial number to make it easier for armorers to inventory their weapons. SureShell shotshell carriers for the Mossberg fit on the left side of the receiver only. You must use a tactical forend that does not significantly overlap the receiver, or a factory forend that is cut down appropriately. SureFire forends will work fine with no alterations.
ORDERING INFORMATION
Part No Item MSRP
91240 SureShell Carrier for Moss 500 (4-Shell, 12-GA) ..............................................................................70.00 90390 SureShell Carrier for Moss 500 (6-Shell, 12-GA) ..............................................................................75.00 90340 SureShell Carrier for Moss 500 (8-Shell, 12-GA) ..............................................................................90.00 93020 SureShell Carrier for Moss 930 (4-Shell, 12-GA) ..............................................................................70.00 93030 SureShell Carrier for Moss 930 (6-Shell, 12-GA) ..............................................................................75.00 93040 SureShell Carrier for Moss 930 (8-Shell, 12-GA) ..............................................................................90.00
93620 SureShell Carrier and Rail for Moss 500 (4-Shell, 12-GA, 4 in)................................................115.00 93630 SureShell Carrier and Rail for Moss 500 (6-Shell, 12-GA, 4 in)................................................120.00 93640 SureShell Carrier and Rail for Moss 500 (8-Shell, 12-GA, 4 in)................................................135.00
www.mesatactical.com 13
BENELLI
As with the other receiver mount SureShell carriers, there are two mounting methods for SureShell carriers on the Benelli platforms; side mount and top mount (with integrated optics rail).
SIDE MOUNT
Our side mount shotgun SureShell shotshell carriers for the Benelli M1/M2 substitute custom-made steel Chicago screws for the trigger pin. The mounting plate is curved to hug the shotgun receiver, preventing movement of the SureShell assembly. SureShell shotshell carriers for the Benelli M1/M2 fit on the left side of the receiver only; they are known to fit onto Benelli M3 shotguns as well as M1 and M2 models. Extra weight on the weapon may adversely affect the reliable cycling of inertia-operated shotguns such as the Benelli M1 or M2 when used with lowrecoil ammunition.
ORDERING INFORMATION
Part No Item ..................................................................................................................................................................................... MSRP
90830 SureShell Carrier for Benelli M1/M2/M3 (4-Shell, 12-GA) ............................................................70.00 90840 SureShell Carrier for Benelli M1/M2/M3 (6-Shell, 12-GA) ............................................................75.00 90850 SureShell Carrier for Benelli M1/M2/M3 (8-Shell, 12-GA) ............................................................90.00
While the Benelli M2 Tactical semiautomatic and Benelli SuperNova pump-action shotgun feature factorytapped rail mounting holes in the top of the receiver, the Benelli M4 and M1014 are shipped with a top Picatinny sight rail. These provided us with an opportunity to develop SureShell shotshell carrier mounting solutions for Benelli shotguns that are streamlined and very robust. Receiver mount SureShell shotshell carriers for the Benelli M2, M4 and M1014 feature mounting brackets with integral top Picatinny sight rails. These brackets are secured to the weapon using the top mounting screw holes. The SureShell shotshell carriers are thus slung on the left side of the receiver, securely fastened at the top. No other shell carrier mounting method is as secure or looks as good. SureShell shotshell carriers for the Benelli M2 Tactical can be installed on Benelli M1 shotguns with round-top receivers by tapping the top of the shotgun receiver with #8-40 threads. Consult a gunsmith. Extra weight on the weapon may adversely affect the reliable cycling of inertia-
#90880 SureShell Carrier and Rail for Benelli M4/M1014 (6-Shell, 12-GA)
14
operated shotguns such as the Benelli M1 or M2 when used with low-recoil ammunition. The Benelli M4 is gas-operated and has no such sensitivity.
ORDERING INFORMATION
Part No Item MSRP
91210 SureShell Carrier and Rail for Benelli M2 Tactical (4-Shell, 12-GA, 4 in)..............................105.00 91220 SureShell Carrier and Rail for Benelli M2 Tactical (6-Shell, 12-GA, 4 in)..............................110.00 91230 SureShell Carrier and Rail for Benelli M2 Tactical (8-Shell, 12-GA, 4 in)..............................125.00 90870 SureShell Carrier and Rail for Benelli M4 (4-Shell, 12-GA, 5 in) .............................................105.00 90880 SureShell Carrier and Rail for Benelli M4 (6-Shell, 12-GA, 5 in) .............................................110.00 90890 SureShell Carrier and Rail for Benelli M4 (8-Shell, 12-GA, 5 in) .............................................125.00 92000 SureShell Carrier and Rail for Benelli SuperNova (4-Shell, 12-GA, 5 in)..............................105.00 92010 SureShell Carrier and Rail for Benelli SuperNova (6-Shell, 12-GA, 5 in)..............................110.00 92020 SureShell Carrier and Rail for Benelli SuperNova (8-Shell, 12-GA, 5 in)..............................125.00
STOCK MOUNT
Our Stock Mount SureShell carriers fit on most Benelli pistol grip fixed stocks. The rugged stamped steel SureShell bracket replaces the stocks sling loop and mounts four additional shells securely on the side of the stock (does not fit on Benelli M4 stocks, nor will this shell carrier fit on the Urbino Tactical stock). This assembly is also available with an H&K style (dog leash) hook loop opposite the shell carrier instead of the webbing loop.
ORDERING INFORMATION
Part No Item
#91840 Stock Mount SureShell Carrier for Benelli M1/M2 (4-Shell, 12-GA)
#91830 Stock Mount SureShell Carrier for Benelli Tac Stocks (except Ben M4) (Hook Loop, 4-Shell, 12-GA)
MSRP
91840 Stock Mount SureShell Carrier for Benelli Tac Stocks (except Ben M4) (4-Shell, 12-GA) ..55.00 91830 Stock Mount SureShell Carrier for Benelli Tac Stocks (Hook Loop, 4-Shell, 12-GA) .............60.00
www.mesatactical.com
15
FN SLP
The mounting system for the SureShell carrier for the FN Self-loading Police shotgun is similar to that of the Mossberg 930, with two sets of Chicago screws in place of the two trigger pins. SureShell shotshell carriers for the FN SLP fit on the left side of the receiver only, and will not interfere with the forend.
ORDERING INFORMATION
Part No Item MSRP
90110 SureShell Carrier for FN SLP (4-Shell, 12-GA) ...................................................................................75.00 90120 SureShell Carrier for FN SLP (6-Shell, 12-GA) ...................................................................................80.00 90130 SureShell Carrier for FN SLP (8-Shell, 12-GA) ...................................................................................95.00
#93340 SureShell Carrier for M4 SOPMOD Stock (4-Shell, 12-GA) (Right Side)
SureShell carriers are also available for the M4 SOPMOD buttstocks (the kind that we supply with our telescoping stock kits). Offered in four- and six-shell versions, these fit securely to standard M4 SOPMOD style stocks from Mesa Tactical as well as other suppliers. Though designed to be installed on the right side of the buttstock, they can be inverted and installed on the left side if necessary.
ORDERING INFORMATION
Part No Item MSRP
93340 SureShell Carrier for M4 SOPMOD Stock (4-Shell, 12-GA) (Right Side)....................................65.00 93350 SureShell Carrier for M4 SOPMOD Stock (6-Shell, 12-GA) (Right Side)....................................70.00
16
#90160 SureShell Carrier for Urbino Cheek Riser (4-Shell, 12-GA) (Left Side)
MSRP
SureShell Carrier for Urbino Riser (4-Shell, 12-GA) (Right Side) .................................................70.00 SureShell Carrier for Urbino Riser (6-Shell, 12-GA) (Right Side) .................................................75.00 SureShell Carrier for Urbino Riser (4-Shell, 12-GA) (Left Side) ....................................................70.00 SureShell Carrier for Urbino Riser (6-Shell, 12-GA) (Left Side) ....................................................75.00
#90370 Adapter Mount SureShell Carrier (4-Shell, 12-GA)
MSRP
90370 Adapter Mount SureShell Carrier (4-Shell, 12-GA) .........................................................................65.00 90380 Adapter Mount SureShell Carrier (6-Shell, 12-GA) .........................................................................70.00 90610 Adapter Mount SureShell Carrier (8-Shell, 12-GA) .........................................................................85.00
www.mesatactical.com
17
Magazine Clamp for Remington (12-GA)...........................................................................................65.00 Magazine Clamp w/ Sling Swivel for Remington (12-GA) ...........................................................75.00 Magazine Clamp w/ Rail for Remington (12-GA) ............................................................................90.00 Barrel Clamp w/ Rail for Remington (12-GA) ....................................................................................90.00 Magazine Clamp for Moss 930 (12-GA) .............................................................................................65.00 Magazine Clamp w/ Sling Swivel for Moss 930 (12-GA) ..............................................................75.00 Magazine Clamp w/ Rail for Moss 930 (12-GA) ...............................................................................90.00 Barrel Clamp w/ Rail for Moss 930 (12-GA) .......................................................................................90.00
Mesa Tactical Catalog #16
PICATINNY RAILS
Mesa Tactical has long been a supplier of MIL-STD-1913 (NATO STANAG 4694) Picatinny rails for #90770 tactical shotguns. A Picatinny rail Picatinny Rail for Moss 500/590 (Standard Profile, for the mounting of sighting optics 4 inch) is included with every Mesa Tactical High-tube Telescoping Stock Adapter Kit. Additional Picatinny rails are also available for the mounting of optics and accessories, such as lights and lasers. Adapter-mount rails are designed to be attached to telescoping stock adapter accessory mount points, requiring no alterations to the shotgun. These are also compatible with Mesa Tactical Barrel Clamps and Magazine clamps (see page 18). Receiver-mount rails are made to be mounted onto the receivers of Remington, Mossberg, and Benelli shotguns with pre-drilled and tapped mounting holes. These rails can also be used with weapons that are custom drilled and tapped. All Mesa Tactical Picatinny rails are machined from 6061-T6 aircraft quality aluminum, and finished with mil-spec Type III hard anodizing. Mesa Tactical Picatinny rails include all necessary mounting hardware.
modate Scattergun/Wilson style ghost ring sights, and extends to the front of the shotgun receiver (5 inch rail), 2 inches past the front of the receiver (8 inch rail), or just beyond the barrels magazine lug (20 inch rail). The 20 inch rails are available with or without the required Magazine Clamp or Barrel Clamp. No gunsmithing is required to install. Minor fitting of fasteners may be necessary.
ORDERING INFORMATION
Part No Item MSRP
Saddle Rail for Remington (12-GA, 5 in) .............................................................................................85.00 Saddle Rail for Remington (12-GA, 8 in) .......................................................................................100.00 Saddle Rail for Remington w/ Barrel Clamp (12-GA, 20 in)........................................................200.00 Saddle Rail for Remington w/ Magazine Clamp (12-GA, 20 in) ................................................200.00 Saddle Rail for Remington (12-GA, 20 in, no clamp) ....................................................................145.00
See page 11 for SureShell Saddle Rails that feature a four-, six- or eight-shot SureShell shotshell carrier yoke on the left side of the receiver.
92150 Side Mount Picatinny Rail for Rem 870 (Right Side) ......................................................................60.00 92350 Side Mount Picatinny Rail for Remington (Left Side) ....................................................................60.00
20
Mesa Tactical makes Picatinny optics rails for several popular shotgun models that feature pre-drilled and tapped holes in the tops of their receivers. Top rails for the Remington 870 use the tactical hole pattern introduced on some tactical 870 models in the summer of 2007. Mossberg rails attach directly to the receivers of late-model (1997 and later) Mossberg pump shotguns with pre-tapped holes. Standard profile Mossberg rails are for general purpose optics mounting applications. Tall profile rails are only for use with Mesa Tactical High-tube telescoping stock adapters, as an alternative to adapter mount rails. Receiver mount rails allow easy access to the Mossberg safety switch. The hardware included with the Remington and Mossberg rails are for pump action shotguns. They can be used with semi-auto versions (Remington 1100 and Remington 11-87, or Mossberg 930) by grinding the fasteners down to the appropriate lengths. Rails for the Benelli M2 Tactical and Benelli SuperNova Tactical mount just forward of the ghost ring sights, extending to the front of the receiver. Benelli M2 Tactical rails can also be installed on round-top Benelli M1 receivers after drilling and tapping the top of the shotgun receiver with #8-40 threads. Consult a gunsmith.
ORDERING INFORMATION
Part No Item MSRP
Picatinny Rail for Remington (5 in) ......................................................................................................35.00 Picatinny Rail for Remington (8 in) ..................................................................................................50.00 Picatinny Rail for Moss 500 (Standard Profile, 4 in) .....................................................................40.00 Picatinny Rail for Benelli M2 Tactical (4 in).....................................................................................45.00 Picatinny Rail for Benelli SuperNova (5 in).....................................................................................45.00
www.mesatactical.com
21
The following two tall profile rails feature an attachment point at one end of the rail.
Part No Item MSRP
90400 Adapter Mount Picatinny Rail (Tall Profile, 9 in)...............................................................................50.00 90410 Adapter Mount Picatinny Rail (Tall Profile, 5 in) ...........................................................................35.00
The following standard profile rails feature attachment points along the length of the rail.
Part No Item MSRP
Adapter Mount Standard Profile Picatinny Rail, 7 in .................................................................40.00 Adapter Mount Standard Profile Picatinny Rail, 5 in .................................................................35.00 Adapter Mount Standard Profile Picatinny Rail, 3 in .................................................................30.00 Adapter Mount Standard Profile Picatinny Rail, 2 in .....................................................................25.00
22
Many operators have requested a more robust sling mounting alternative to our push-button sling swivels. Our answer is a line of rugged steel sling loops and hook loops designed to be fastened to the mount points of our telescoping stock adapters, or to the receivers of popular shotgun models. Sling loops are designed to accept USGI standard 1 inch webbing. Hook loops accommodate H&K-style quick-release sling hooks. Our hook loops and sling loops are stamped 11 gauge steel, with a mil-spec manganese phosphate finish.
REMINGTON
The Remington shotguns rear trigger group pin is replaced by a stainless steel standoff with female threads, into which the steel sling loop retainer, or bushing, can be tightly screwed. The sling or hook loop is free to rotate about the retainer. A rubber gasket keeps the sling loop from marring the receiver finish. Our Push-button Sling Swivel Mount is secured to the shotgun in the same way as the sling loop, except it allows the use of a sling swivel that can be removed from the weapon with the press of a button. We include a US-made Push Button Sling swivel with the mount. Sling mounts are finished with mil-spec manganese phosphate. All our receiver mount sling attaching solutions are fully compatible with our four-shot and sixshot receiver mount SureShell shotshell carriers (but not the eight-shot versions).
ORDERING INFORMATION
Part No Item MSRP
90330 Sling Loop for Remington ................................................................................................................... 20.00 90930 Hook Loop for Remington .................................................................................................................. 20.00 90940 Push-button Sling Swivel for Remington ...................................................................................... 25.00
www.mesatactical.com 23
MSRP
93320 Receiver-back Hook Loop for Remington ...................................................................................... 45.00 93330 Receiver-back Ambi Hook Loop for Remington .......................................................................... 45.00
MOSSBERG
Hook Loop for The receiver mounting scheme of our Mossberg 500/590/835 sling and hook loops for the Mossberg 500 and Mossberg 590 substitutes custom-machined Chicago fasteners for the trigger pin. The sling or hook loop is free to rotate about the retainer. A rubber gasket keeps the sling loop from marring the receiver finish. Our Push-button Sling Swivel Mount is secured to the shotgun in the same way as the sling loop, except it allows the use of a sling swivel that can be removed from the weapon with the press of a button. We include a US-made Push Button Sling swivel with the mount. Sling mounts are finished with mil-spec manganese phosphate. All our receiver mount sling attaching solutions are fully compatible with our four-shot and sixshot receiver mount SureShell shotshell carriers (but not the eight-shot versions).
#90270
ORDERING INFORMATION
Part No Item MSRP
Sling Loop for Moss 500/590 ................................................................................................................ 25.00 Hook Loop for Moss 500/590 ............................................................................................................... 25.00 Push-button Sling Swivel for Moss 500/590 ................................................................................... 30.00 Sling Loop for Moss 930 .......................................................................................................................... 25.00 Hook Loop for Moss 930 ......................................................................................................................... 25.00 Push-button Sling Swivel for Moss 930 ............................................................................................. 30.00
24
BENELLI
For the Benelli M1014 semi-automatic shotgun, we substitute custom-machined steel fasteners for the split pin in the skeleton stocks pistol grip assembly. Our Push-button Sling Swivel Mount is secured to the shotgun in the same way as the sling loop, except it allows the use of a sling swivel that can be removed from the weapon with the press of a button. We include a US-made Push Button Sling swivel with the mount. Sling mounts are finished with mil-spec manganese phosphate. These sling and hook loop mounts are only compatible with the skeleton style stock for the Benelli M1014. Some drilling and fitting will be required.
ORDERING INFORMATION
Part No Item MSRP
91420 Sling Loop for Benelli M1014 ............................................................................................................... 25.00 91430 Hook Loop for Benelli M1014 .............................................................................................................. 25.00 91330 Push-button Sling Swivel for Benelli M1014 .................................................................................. 30.00
www.mesatactical.com
25
ORDERING INFORMATION
Part No Item MSRP
Sling Loop Magazine Cap for Remington ........................................................................................ 25.00 Hook Loop Magazine Cap for Remington ....................................................................................... 25.00 Ambi Hook Loop Magazine Cap for Remington ............................................................................ 25.00 Push-button Sling Swivel Magazine Cap for Remington ........................................................... 25.00
Hook Loop for Magazine Extension (Vang Comp, 12-GA) ...........................................................10.00 Ambi Hook Loop for Magazine Extension (Vang Comp, 12-GA) ...............................................10.00 Hook Loop for Magazine Extension (Benelli M2, 12-GA)..............................................................10.00 Ambi Hook Loop for Magazine Extension (Benelli M2, 12-GA) ..................................................10.00 Hook Loop for Magazine Extension (Benelli M4, 12-GA)..............................................................10.00 Ambi Hook Loop for Magazine Extension (Benelli M4, 12-GA) ..................................................10.00
26
#91410 Rear Hook Loop for Benelli Tactical Stocks (except Benelli M4)
Factory tactical stocks for most Benelli shotguns include a stamped steel sling plate in the center of the stock. We have produced a replacement stamping that features a circular hook loop instead of the sling loop for use with H&K style (dog leash) sling hooks. Our Rear Hook Loop fits all Benelli platforms except the Benelli M4 (in which the sling plate is actually glued in place), and features a tough mil-spec manganese phosphate finish.
ORDERING INFORMATION
Part No Item MSRP
91410 Rear Hook Loop for Benelli Tactical Stocks (except Benelli M4) ................................................10.00
90200 Adapter Mount Sling Loop (Y Loop) ............................................................................................... 20.00 90250 Adapter Mount Sling Loop (H Loop) ............................................................................................... 20.00 90680 Adapter Mount Hook Loop ................................................................................................................. 20.00
www.mesatactical.com
27
ADAPTER POCKET SLING LOOPS AND HOOK LOOPS FOR REMINGTON 870
All our telescoping stock adapter designs for the Remington 870, as well as the PGO adapter, include a pocket between the adapter and the shotgun receiver that accepts steel sling sloops or hook loops (see pages 6-9). These sling mounts are stamped steel with a tough mil-spec manganese phosphate finish.
ORDERING INFORMATION
Part No Item
#91390 Pocket Ambi Sling Loop for Remington Stock and PGO Adapters
MSRP
Pocket Sling Loop for Remington Stock and PGO Adapters ................................................... 10.00 Pocket Hook Loop for Remington Stock and PGO Adapters ................................................... 10.00 Pocket Ambi Sling Loop for Remington Stock and PGO Adapters ........................................ 12.00 Pocket Ambi Hook Loop for Remington Stock and PGO Adapters ....................................... 12.00
POCKET SLING LOOPS AND HOOK LOOPS FOR URBINO TACTICAL STOCKS
The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts. The Push Button Sling Swivel mount includes a USmade Push Button Sling Swivel, and all the sling mounts feature a tough mil-spec manganese phosphate finish. Ambi style sling attachments feature mounts on both sides of the receiver.
#91440 Pocket Push Button Sling Mount for Urbino Tactical Stock for Benelli M1/M2 (12-GA)
#91900 Pocket Ambi Hook Loop for Urbino Tactical Stock for Benelli M1/M2 (12-GA)
#91780 Pocket Ambi Hook Loop for Urbino Tactical Stock for Benelli M4 (12-GA)
ORDERING INFORMATION
Part No Item MSRP
Pocket Sling Loop for Urbino Tactical Stock for Remington (12-GA) .................................... 12.00 Pocket Hook Loop for Urbino Tactical Stock for Remington (12-GA) ................................... 12.00 Pocket Push Button Sling Mount for Urbino Tactical Stock for Remington (12-GA) ....... 25.00 Pocket Ambi Sling Loop for Urbino Tactical Stock for Remington (12-GA) ........................ 14.00 Pocket Ambi Hook Loop for Urbino Tactical Stock for Remington (12-GA) ....................... 14.00
Mesa Tactical Catalog #16
91530 Pocket Ambi Push Button Sling Mount for Urbino Tactical Stock for Remington (12-GA) ... 25.00 91870 91880 91440 91890 91900 91450 91750 91760 91480 91770 91780 91490 Pocket Sling Loop for Urbino Tactical Stock for Benelli M1/M2 (12-GA) ............................. 12.00 Pocket Hook Loop for Urbino Tactical Stock for Benelli M1/M2 (12-GA) ............................. 12.00 Pocket Push Button Sling Mount for Urbino Tactical Stock for Benelli M1/M2 (12-GA) 25.00 Pocket Ambi Sling Loop for Urbino Tactical Stock for Benelli M1/M2 (12-GA) ................. 14.00 Pocket Ambi Hook Loop for Urbino Tactical Stock for Benelli M1/M2 (12-GA) ................. 14.00 Pocket Ambi Push Button Sling Mount for Urbino Tactical Stock for Benelli M1/M2 (12-GA) ... 25.00 Pocket Sling Loop for Urbino Tactical Stock for Benelli M4 (12-GA) ..................................... 12.00 Pocket Hook Loop for Urbino Tactical Stock for Benelli M4 (12-GA) ..................................... 12.00 Pocket Push Button Sling Mount for Urbino Tactical Stock for Benelli M4 (12-GA) ........ 25.00 Pocket Ambi Sling Loop for Urbino Tactical Stock for Benelli M4 (12-GA) ......................... 14.00 Pocket Ambi Hook Loop for Urbino Tactical Stock for Benelli M4 (12-GA) ......................... 14.00 Pocket Ambi Push Button Sling Mount for Urbino Tactical Stock for Benelli M4 (12-GA) 25.00
Rear Hook Loop for Urbino Tac Stock for Remington 870 (12-GA)...........................................12.00 Rear Hook Loop for Urbino Tac Stock for Remington Semi-auto (12-GA) .............................12.00 Rear Hook Loop for Urbino Tac Stock for Ben M1/M2 (12-GA) ..................................................12.00 Rear Hook Loop for Urbino Tac Stock for Ben M4 and SuperNova (12-GA)...........................12.00
www.mesatactical.com
29
Push Button Sling Swivel for 1-1/4 inch Webbing ...................................................................... 12.00 Hogue Rubber Overmolded Combat Grip .................................................................................... 26.00 ERGO Grip ................................................................................................................................................ 26.00 CAR Stock Lock Nut ................................................................................................................................... 6.00
The Trigger Pin Replacement Kits, also known as anti-walk pins, can be installed in Remington shotguns to secure the trigger pins in place. These kits are incompatible with receiver mounted SureShell carriers or side Picatinny rails.
Part No Item MSRP
Our exclusive new mulitool doubles as an AR-15 stock wrench and pump shotgun forend wrench (for Remington and Mossberg). We include a multi-tool in every stock kit, but it doesnt hurt to have extra ones laying around.
Part No Item MSRP
OPERATORS CAPS
These days the well-dressed peace officer wouldnt think of stepping outside to serve a felony warrant without one of our new Mesa Tactical Operators Caps. These high-quality cotton twill caps feature a Mesa Tactical Guy logo embroidered on the front, and Mesa Tactical on the back. One size fits all with Velcro adjustment strap. Imported from youknow-where.
ORDERING INFORMATION
Part No Item MSRP
51001 Mesa Tactical Operators Cap, white on black .................................................................................15.00 51002 Mesa Tactical Operators Cap, black on khaki ..................................................................................15.00
30
TEE SHIRTS
Our soon-to-be-classic Mesa Tactical tee shirts are heavy 100% pre-shrunk cotton. Available in two designs, short-sleeve and long-sleeve shirts featuring a big Mesa Tactical Guy logo on the back and a smaller one over the left breast; and the shotgun design for short-sleeve shirts only, with a cool red shotgun graphic on the back. Shirts are available in black, gray, olive and desert tan, sizes M to XXXL. Call for prices.
CREDITS
Photography: Caleb Coppola Photography, Los Angeles, CA; MSL International Enterprises, Redondo Beach, CA; R.D. Design, Rancho Santa Margarita, CA; Vision Photodesign, Temecula, CA Design and layout: Thom Barrie Graphics, Bellingham, WA Printing: Printwell, Huntington Beach, CA
www.mesatactical.com 31