Sunteți pe pagina 1din 4

Multi Effects Switching System

Looper Addendum

Updating your RP500


To update your RP500 with the version 2.0 firmware, follow these steps: . Connect your RP500s USB cable to an available USB port on your computer and power the RP500. 2. Backup your RP500 using X-Edit. ATTENTION: ALL PRESETS WILL BE ERASED DURING THE UPDATE PROCESS. BE SURE TO BACKUP THE RP500 FIRST USING X-EDIT BEFORE UPDATING!! 3.Visit www.digitech.com/software_support/ using your web browser. 4. Select RP500 from the Select Product menu and then select the operating system for your computer from the Select Operating System menu. 5. Click the 1. Download Files tab and download the NetUpdater application to your desktop. 6. Launch the NetUpdater application and follow the onscreen instructions to update your RP500 to version 2.0. 7. Use X-Edit to restore the backup you made to the RP500. Once your RP500 is successfully updated, you can now begin using the new Looper feature.

Using the RP500s Looper

The RP500 now includes a dedicated Looper phrase sampler that lets you record up to 20 seconds of your guitar playing and play it back as an endless loop so you can solo over it. Once a loop is recorded, you can also add more guitar parts to the recorded loop (overdub). Whats great about the RP500s Looper is that even while the Looper is playing back and/or recording you can still select different presets or turn on and off effects to add different sounds to your loop or overdubs. When the Looper is turned on, the Up/Down footswitches will not select preset banks (Preset Mode) or select presets (Pedalboard Mode). You can use the -5 footswitches to do this. There are two ways to use the Looper: with a quiet start or on the fly. Quiet start means you Arm the Loopers record feature when youre not playing your guitar, and then it automatically starts recording when you start playing. On the fly means you arm the record feature while youre playing, and the Looper starts recording as soon as you step on the Down footswitch. To use the Looper with a quiet start, follow these steps: . Press and hold the Up Footswitch for 2 seconds until LOOPER appears in the display indicating the Looper is now active. 2. To begin looping, press the Down Footswitch. The Display will show ARMED indicating the Looper is armed and ready to record but not actually recording yet.

3. Begin playing a phrase on the guitar. The the Display will show RECRDING and the Looper will begin recording anything that is played. 4. Once you are ready to set the loop point, press Down Footswitch again. The Display will read PLAYING and the recorded phrase will now begin playing back. 5. To add an overdub to the looped phrase, press the Down Footswitch again. The display will read OVERDUB and anything that is played at this time will be added to the loop. When you are finished with the overdub, press the Down Footswitch again. The display will read PLAYING and the looped phrase will continue with the newly added overdub phrase added. 6. To stop the Phrase Looper, press the Up Footswitch and the display will read STOPPED. You can resume playback by pressing the Down Footswitch again. 7. To clear a recorded loop, stop the loop playback first as outlined in step 6 and then press and hold the Up Footswitch for 2 seconds until the display read LOOPCLRD. To use the Looper on the fly, follow these steps: . Press and hold the Up Footswitch for 3 seconds until LOOPER appears in the display indicating the Looper is now active. 2. Start playing your guitar. 3. To begin looping, press the Down Footswitch. The Display will show RECRDING and the Looper will begin recording anything that is played. 4. Once you are ready to set the loop point, press Down Footswitch again. The Display will read PLAYING and the recorded phrase will now begin playing back. 5. To add an overdub to the looped phrase, press the Down Footswitch again. The display will read OVERDUB and anything that is played at this time will be added to the loop. When you are finished with the overdub, press the Down Footswitch again. The display will read PLAYING and the looped phrase will continue with the newly added overdub phrase added. 6. To stop the Phrase Looper, press the Up Footswitch and the display will read STOPPED. You can resume playback by pressing the Down Footswitch again. 7. To clear a recorded loop, stop the loop playback first as outlined in step 6 and then press and hold the Up Footswitch for 2 seconds until the display read LOOPCLRD. To exit the Phrase Looper mode, press and hold the Up Footswitch for 4 seconds until the display reads LOOPEXIT. Exiting the Looper clears the recorded loop.

DigiTech 8760 South Sandy Parkway Sandy, Utah 84070 PH (80) 566-8800 FAX (80) 566-7005 http://www.digitech.com
RP500 Looper Addendum

2009 Harman International Industries, Incorporated, all rights reserved.

S-ar putea să vă placă și