Sunteți pe pagina 1din 5

QUESTION & ANSWERS Pro/ENGINEER

Creating Sketches in the Sketch Mode-I


1. Dimensions and constraints are automatically applied to a sketch when you draw it. (T/F). TRUE 2. In Pro/ENGINEER, you can create lines that are tangent to two circles. (T/F) TRUE 3. If the Intent Manager is on and you draw a line, the cursor snaps to the endpoint of the previous line. (T/F) TRUE 4. You can convert a weak constraint to strong by using the shortcut menu that is displayed when you right-click on the weak constraint. (T/F) TRUE 5. While drawing a circle, first you need to specify its diameter. (T/F) FALSE 6. The EDIT menu in the menu bar has the Modify option in it. 7. The sketch can be modified by changing its DIMENSION. 8. Intent Manager is ON by default when you enter the Sketch mode. (on/off) 9. In the Sketch mode, the tangent constraint is represented by __T________symbol. 10. The files in the Sketch mode are saved with a .sec file extension. Answer the following questions: 1. What is the need of the Sketch mode in Pro/ENGINEER? To create a three-dimensional (3D) feature. 2. What are the four basic steps to create a sketch? Sketch the required section geometry Add the constraints and dimensions to the sketched section Add relations to the sketch if needed Regenerate the section 3. What are the various types of lines you can sketch using the buttons in the Sketcher Tools toolbar? Line Using the Create 2 point lines Tool Line Using the Create lines tangent to 2 entities Tool Drawing a Centerline Using the Create 2 point centerlines Tool 4. Why is it important to select the working directory before creating a new file? To save the work done in the current session of Pro/ENGINEER. 5. Write all steps involved in creating a sketch that is accepted by Pro/ENGINEER. 6. You can dynamically modify the geometry of a sketch. (T/F) TRUE 7. You can use the Create rectangle button from the Sketcher Tools toolbar to draw a square. (T/F) TRUE 8. The Impose sketcher constraints on the section button is used to apply constraints manually. 9. You cannot undo a previous operation in the sketcher environment. (T/F) FALSE 10. You can also use the options in the menu bar to draw a sketch from the Sketch menu (T/F). TRUE

Editing in the Sketch Mode


1. The variable dimension created using the Perimeter option can be modified directly by selecting it using the left mouse button. (T/F) FALSE 2. If the variable dimension is deleted then the perimeter dimension is also deleted. (T/F). TRUE 3. When you modify a weak dimension it becomes strong. (T/F) TRUE 4. You can dimension the length of a center line. (T/F) FALSE 5. Center lines and planes split when intersected. (T/F) FALSE 6. The splines created by using the Control Poly option can be dimensioned to the coordinate system. 7. When you are using the Intent Manager, the Modify Dimensions dialog box is used to modify dimensions. 8. The display of dimensions and constraints can be turned on/off by choosing the Toggle display of dimensions on/off and display of constraints on/off button respectively from the Sketcher toolbar. 9. The Scale and rotate selected entities button is used to rotate selected entities when the Intent Manager is on. 10. When the Intent Manager is on, you can delete the entities by selecting them and then using the DELETE key. 1. Which of the following symbol represents the normal dimension in the Sketch mode? (a) d (b) sd (c) ref (d) kd 2. Using which submenu the display of vertices of the section, the display of dimensions, and display of constraints can be made off or on? (a) DIMENSION (c) MOD SPLINE (b) SEC ENVIRON (d) GEOMETRY

3. When the Intent Manager is off, a sketch is modified by using the __________ submenu? (a) GEOM TOOLS (c) MOD SKETCH (b) GEOMETRY (d) None

4. Which of the following submenu has the Intersect option? (a) GEOMETRY (b) DIMENSION (c) MOD SKETCH (d) GEOM TOOLS 5. Which type of dimensioning uses relations? (a) Normal (c) Baseline (b) Perimeter (d) Known

6. While placing a section in a new sketch, use the right mouse button to place the section.(T/F) TRUE 7. There is only one method to make the grids on or off, which is, using the Sketcher toolbar button. (T/F) TRUE 8. The reference dimensions appear with the suffix REF. (T/F) TRUE 9. While using the Intent Manager, you can modify the dimensions dynamically. (T/F). 10. The modification of a spline is possible by using the Move Points and Control Poly options of the MOD SPLINE menu. (T/F) TRUE

Creating Base Features

1. All features created in the Part mode are called the base features. (T/F) FALSE 2. You can extrude a sketch to both the sides of the sketching plane symmetrically. (T/F) TRUE 3. When the sketcher environment is invoked, the references required for creating a sketch are automatically selected. (T/F) TRUE 4. The Sketch dialog box is used to select the sketching plane. (T/F) TRUE 5. After selecting the sketching plane, the yellow arrow displayed on it shows the direction in which you will view the sketching plane. (T/F) TRUE 6. The Extrude as solid button is selected by default when the Extrude dashboard is displayed. 7. The Thicken Sketch button in the Revolve dashboard is used to create a thin revolve model. 8. The Orientation dialog box is displayed when you choose the Reorient view button. 9. After you exit the sketcher environment, the handles appears on the model to dynamically modify the extrusion depth or the angle of revolution. 10. The Revolve Tool button revolves the sketched section about a center line through the specified angle. Answer the following questions: 1. By default a sketch is revolved about a center line in the ____________ direction. (a) Clockwise (c) Right (b) Counterclockwise (d) None of the above

2. Which of the following menus in the menu bar contains the Extrude option? (a) Edit (c) Insert (b) View (d) File

3. How many datum planes are available when you enter the Part mode? (a) 4 (c) 2 (b) 3 (d) None

4. Which of the following toolbar is used to turn off the display of datum planes? (a) View (b) Sketcher (c) Model Display (d) Datum Display 5. Which of the following combination is used to change the orientation of the model to the default orientation? (a) CTRL+D (b) CTRL+left mouse button (c) CTRL+right mouse button (d) None of the above 6. The features created using the Blind option do not have a dimension associated with them, and hence they cannot be modified by changing the dimension value. (T/F) 7. It is recommended not to use the default datum planes to create the base feature. (T/F) 8. The section drawn for revolving as a solid should be a closed loop. (T/F) 9. The revolved section should have a center line. (T/F) 10. A revolved section can be drawn on both the sides of the center line. (T/F)

S-ar putea să vă placă și