Documente Academic
Documente Profesional
Documente Cultură
1
Product code
Applications
Composite panel to steel substructure Composite panel to timber substructure Side lap and stitching Sealing joint
2 3 4 5 6 7 8 9 10 11 12 13 14
6. 1
Composite panels
1
Fast and comfortable fixing of sandwich panels.
2 3 4 5 6 7 8 9 10 11 12 13 14
An increasing awareness of environmental and energy issues and evertighter fire safety constraints all mean that the operating environment in industrial light building is changing.
Using state-of-the art sandwich panels helps you rise to the challenges of economic construction and modern design needs. Great demands are also placed on the associated fasteners.
SFS intec offers the answer with the SXC family. These parts fulfil a host of requirements in terms of both installation and long-term behaviour.
The impressive features of SXC fasteners Fast, efficient assembly using self-drilling fastening technology The right fastener for each individual substrate A complete system, featuring the CF 55 setting tool No need to swap setting tools, as one tool does everything A depth stop, coupled with sealing washer and special under-head design, avoid dimpling of the sheet Maximum corrosion resistance
Fixing sandwich panels in one operation SFS intec SXC self drilling fasteners have been specially developed for the exacting demands of sandwich systems. Dynamic stress caused by temperature changes, foot traffic or wind load simply wont affect fastener performance. The supporting thread, thread-free zone and the vital sealing washer ensure a lifetime seal.
Perfect fixing with the CF 55 installation tool The front attachment enables simple insertion and high-quality fastening. This is particularly useful where extremely long fasteners are required. The depth locator also inhibits dimpling of the sheet, as well as faulty seals.
A multiplicity of colours To meet the requirements of architectural aesthetics, SFS intec offers these fasteners in any colour. The tried and trusted powder coating accurately matches the exact tone of the sandwich panels being used.
6. 2
Composite panels
1
SXC / SX
2 3
Technical information
Applications
4 5
Washer
Fastening composite panels to steel substructure. The unique thread free zone underneath the head ensure the fastening will remain sealed during the lifetime of the construction.
Material Fastener
Drill point
SXC Austenitic stainless steel, grade AISI 304 (European Standard 1.4301) SX Austenitic stainless steel, grade AISI 304 (European Standard 1.4301), or grade AISI 316 (European Standard 1.4401) on request.
S = Stainless steel, grade AISI 304 (European Standard 1.4301) A = Aluminium with vulcanised EPDM
Case hardened, special carbon steel Coloured fasteners available Colour heads are achieved through powder coating
Coloured fastener
6 7 8 9 10
HD headform / drive
Hexagon 8 mm A/F
Washer recommendation
16 - 19 mm for cladding
Accessories CF 55
19 mm for roofing
29 mm for rooflights
11 12
DI 600
A purpose designed setting tool for installing long composite panel fasteners. The extension drive bar and nosepiece ensure the fasteners are installed correctly.
Lightweight power screwgun for installing self drilling and self tapping fasteners.
13 14
6. 3
Composite panels
1
Order information
2 3 4 5 6 7 8 9 10 11
SFS
d KL
Hexagon 8 mm A/F
Coloured fastener
VD max. penetration | D panel thickness | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of structure | All measures in mm
Applications
SXC Approval Type SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SXC SX SX SX SX SX SX SX SX SX
DTU 40.35 DTU 40.36
Example order code S19- 5,5x 62 5VD KL W* d L 55555555551414141414141414141414145/ 5/ 5/ 5/ 5/ 14/ 14/ 14/ 14/ 3055708511520385875S19S19S19S19S19S19S19S19S19S19S19S19S19S19S19S19S19S19S19S19S19S19S16S16S16S16S16S16S16S16S165,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 62 82 92 113 133 163 193 236 261 286 71 80 99 118 138 147 168 193 218 243 268 293
D 29 39 49 59 79 99 129 157 182 207 27 37 48 67 85 85 106 115 140 165 190 215 36 56 66 87 107 137 167 210 235 260 38 48 67 86 106 116 135 160 185 210 235 260 30 55 70 85 115
Application range
D
VD max. steel 5,0 mm t min. steel: 1,5 - 4,0 mm
SFS
Stainless steel
Stainless steel
5,5x 54 20 5,5x 80 15 5,5x 95 30 5,5x 110 45 5,5x 140 75 5,5x 48 5,5x 63 5,5x 84 5,5x 100 20 38 58 75
KL
SFS
Stainless steel
KL
12 13 14
6. 4
Composite panels
1
SXCW / SXW
2 3
Technical information
Applications
4 5
Washer
Fastening composite panels to timber substructure. The unique thread free zone underneath the head ensure the fastening will remain sealed during the lifetime of the construction.
Material Fastener
Drill point
SXCW / SXW Austenitic stainless steel, grade AISI 304 (European Standard 1.4301)
S = Stainless steel, grade AISI 304 (European Standard 1.4301) A = Aluminium with vulcanised EPDM
Case hardened, special carbon steel Coloured fasteners available Colour heads are achieved through powder coating
Coloured fastener
6 7 8
HD headform / drive
Hexagon 8 mm A/F
Washer recommendation
9
19 mm for roofing 29 mm for rooflights
10 11 12
DI 600
A purpose designed setting tool for installing long composite panel fasteners. The extension drive bar and nosepiece ensure the fasteners are installed correctly.
Lightweight power screwgun for installing self drilling and self tapping fasteners.
13 14
6. 5
Composite panels
1
Order information
2 3 4 5 6 7
SFS
d KL
Hexagon 8 mm A/F
Coloured fastener
VD max. penetration | D panel thickness | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of structure | All measures in mm
Applications
Example order code SXCW- S19- 6,5x 90 Approval Type W* d L SXCWSXCWSXCWSXCWSXCWSXCWSXCWSXCWSXCWSXCWSXWSXWSXWS19S19S19S19S19S19S19S19S19S196,5x 6,5x 6,5x 6,5x 6,5x 6,5x 6,5x 6,5x 6,5x 6,5x 90 105 115 135 155 185 205 235 275 305 54 75 99
D 28 38 48 68 78 100 120 150 185 215 37 55 65 85 105 135 155 185 225 255
Application range
D
VD max. steel 2,0 mm
Stainless steel
8 9 10 11 12 13 14
Accessories can be found in chapter 12
6. 6
Composite panels
1
The secure and speedy way to fix overlapping profiles.
2 3 4 5 6 7 8 9 10 11 12 13 14
The SL self drilling fastener range, specially developed for fixing one metal profile to another, offers decisive advantages in use and in its durability.
The impressive features of the SL fastener Incorrect insertion virtually eliminated 100 % functionality from start to finish EPDM washers ensure effective sealing Ergonomic working with the CF 400 installation tool Increased productivity thanks to magazine-fed fasteners =Time is money !
Self drilling fasteners for fast, efficient overlapping These special fasteners designed specifically for thin overlapping profiles offer a range of benefits. The optimum clamping strength results from careful matching of the tip to the thread diameter. Moreover, the special under-head design inhibits over-torquing as well as self-loosening under dynamic load. Any unevenness in the set is smoothed out by the special soft EPDM sealing washer. So the bond is always safe and secure. Safe and easy installation with the CF 400 installation tool Even working on the roof, a simple extension attached to the CF 400 insertion tool is all that is required to maintain a standing position. And using magazine-fed fasteners really speeds up the whole process.
6. 8
Composite panels
1
SL2-S
2 3
Technical information
Applications
Stainless steel fastening of side laps and flashings. The thread-free zone under the fastener head prevents stripping of the threads in the sheets. The sheets are pulled together tightly, clamped in the thread-free zone and sealed. The fasteners can be used without depth stop or torque coupling.
Material Fastener
4 5 6 7 8
Washer
Drill point
SL2-S Austenitic stainless steel, grade AISI 304 (European Standard 1.4301), or grade AISI 316 (European Standard 1.4401) on request.
S = Stainless steel, grade AISI 304 (European Standard 1.4301) A = Aluminium with vulcanised EPDM
Case hardened, special carbon steel Coloured fasteners available Colour heads are achieved through powder coating
Coloured fastener
HD headform / drive
Hexagon 8 mm A/F
irius 12 mm
9 10
Automatic setting tool for installing belted fasteners (10 pcs) with a maximum 16 mm diameter washer and upto a maximum length of 40 mm.
Lightweight power screwgun for installing self drilling and self tapping fasteners.
The E420 setting tool is required for installing self drilling fasteners with the irius system. The E480 setting tool is recommended for installing self drilling fasteners with the hexagon head.
11 12 13 14
6. 9
Composite panels
1
Order information
2 3 4 5 6 7 8 9 10 11 12 13 14
d KL
Hexagon 8 mm A/F
L
irius 12 mm
Coloured fastener
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of structure | All measures in mm
Applications
Example order code S14- 4,8x 22 HD W* d L KL S14- 4,8x 22 S14- 5,5x 22 S14- 5,5x 27
Application range
VD max. steel 2,0 mm t min. steel: 2 x 0,4 - 2 x 1,0 mm
Stainless steel
SL2-S-
Stainless steel
SL2-S-
S16- 6,3x 28
6. 10
Composite panels
1
LS
Product advantages
2 3 4 5
self-adhesive on one side to facilitate application raintight seal permits vapour diffusion easy to compress
Technical information
Applications Material
Colour
The pre-compressed tape is used for sealing joints against driving rain, dust, etc. It is suitable for longitudinal and transverse joints between trapezoidal profiles and sandwich elements.
Technical details
Grey
6 7
Item Class of building material Vapour diffusion resistance Heat resistance Compatibility with building Joint permeability Processing temperature Shelf life Storage temperature Driving rain leak-tightness Weathertightness
Characteristics B2 (normally flammable) 100 30C to +90C granted a 0,1 m3 / [h x m x (daPa)n] +5C to +50C 1 year +1C to +20C
8 9 10 11 12
18055 18542
Order information
Example order code 10/ 2-3 tape width joint height 10/ 15/ 30/ 15/ 10/ 15/ 30/ 2-3 2-3 2-3 3-5 3-6 3-6 3-6
LSType LSLSLSLSLSLSLS-
m/roll 25 25 25 18 13 13 13
13 14
6. 11
Composite panels
1
EB
2 3 4 5
Product advantages
self-adhesive on one side to facilitate application non-compressible dimensionally stable, even at high temperatures
Technical information
6 7 8 9 10 11 12 13 14
Applications
Material
Colour
The dimensionally stable sealing tape is used for thermal separation of structural components, e.g. the top flange of liner trays, to minimise heat build-up.
Technical details
Anthrazit
Item Class of building material Heat resistance Compatibility with building Processing temperature Shelf life Storage temperature Thermal conductivity
Characteristics B2 (normally flammable) 30C to +130C granted +5C to +50C 2 years +1C to +20C B2 (normally flammable)
Order information
Example order code 30/ 3 tape width tape thickness 30/ 60/ 80/ 3 3 3
EBType EBEBEB-
m/roll 30 30 30
6. 12
Composite panels
1
LD
Product advantages
2 3 4 5
self-adhesive on one side to facilitate application good adjustment even with wide joint tolerances especially easy to compress no deformation of the steel profiles leak-tight to driving rain up to600 Pa stress class BG1 airtight seal permits vapour diffusion
Technical information
Applications Material
Colour
The pre-compressed tape is used for airtight sealing of joints, e.g. for longitudinal and transverse liner joints and joints between sandwich elements.
Technical details
Anthrazit
6 7
Item Class of building material Vapour diffusion resistance Heat resistance Compatibility with building Joint permeability Processing temperature Shelf life Storage temperature Driving rain leak-tightness Weathertightness
Characteristics B1 (flame-retardant) 100 30C to +90C granted a 0,1 m3 / [h x m x (daPa)n] +1C to +50C 1 year +1C to +20C
8 9 10 11
18055 18542
Order information
Example order code 10/ 1-3 tape width joint height 10/ 14/ 10/ 14/ 10/ 14/ 14/ 18/ 1-3 1-3 1-4 1-4 2-6 2-6 3-9 6-18
LDType LDLDLDLDLDLDLDLD-
m/roll 30 30 22 22 18 18 12 6
12 13 14
6. 13
Composite panels
1
Product code
Applications
Composite panel to steel substructure Composite panel to timber substructure Side lap and stitching Flatroof insulated panel to steel substructure Sealing joint
2 3 4 5 6 7 8 9 10 11 12 13 14
7. 1
Composite panels
1
SDT / SD
2 3
Technical information
4 5 6 7 8 9
Applications
Fastening composite panels to steel substructure. The unique thread free zone underneath the head ensure the fastening will remain sealed during the lifetime of the construction.
Material Fastener
Washer
Coloured fastener
A = Aluminium with vulcanised EPDM S = Stainless steel, grade AISI 304 (European Standard 1.4301)
Coloured fasteners available Colour heads are achieved through powder coating
HD headform / drive
Hexagon 8 mm A/F
Washer recommendation
19 mm for roofing
29 mm for rooflights
10 11 12 13 14
Accessories CF 55 DI 600
A purpose designed setting tool for installing long composite panel fasteners. The extension drive bar and nosepiece ensure the fasteners are installed correctly.
Lightweight power screwgun for installing self drilling and self tapping fasteners.
7. 2
Composite panels
1
Order information
d KL
Hexagon 8 mm A/F
L
Coloured fastener
2 3 4
VD max. penetration | D panel thickness | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of structure | All measures in mm
Applications
SDT Approval Type SDT SDT SDT SDT SDT SDT SDT SDT SDT
Example order code 5- A19- 5,5x 67 VD W* d L 555555555A19A19A19A19A19A19A19A19A195,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 67 77 97 112 137 162 182 226 276
Application range
D
VD max. steel 5,0 mm t min. steel: 1,5 mm
5 6
SFS
Carbon steel
SDT SDT SDT SDT SDT SDT SDT SDT SDT SDT SD SD SD SD SD
1414141414141414141433333-
A19A19A19A19A19A19A19A19A19A19S16S16S16S16S16-
5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x 5,5x
7 8 9
Carbon steel
10 11 12 13 14
SFS
SFS
7. 3
Composite panels
1
Order information
2 3 4 5 6 7
SFS
SFS
S
d KL
Hexagon 8 mm A/F
L
Coloured fastener
VD max. penetration | D panel thickness | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of structure | All measures in mm
Applications
Example order code 5- A19- 5,5x 67 VD W* d L 555555A16A16A16A16A16A165,5x 5,5x 5,5x 5,5x 5,5x 5,5x 97 112 137 162 182 226
Application range
KL
VD max. steel 5,0 mm t min. steel: 1,5 mm
SFS
Carbon steel
SD SD SD SD
14141414-
S16S16S16S16-
56 66 76 86
5 15 25 35
35 45 55 65
KL
8
Carbon steel
9 10 11 12 13 14
141414141414-
A16A16A16A16A16A16-
48 68 87 94 122 167 -
KL
SFS
7. 4
Composite panels
1
SDTW
2 3
Technical information
Applications
Fastening composite panels to timber substructure. The unique thread free zone underneath the head ensure the fastening will remain sealed during the lifetime of the construction.
Material Fastener
4 5 6 7
Washer
Coloured fastener
Coloured fasteners available Colour heads are achieved through powder coating
HD headform / drive
Hexagon 8 mm A/F
Washer recommendation
8
19 mm for roofing 29 mm for rooflights
9 10 11
DI 600
A purpose designed setting tool for installing long composite panel fasteners. The extension drive bar and nosepiece ensure the fasteners are installed correctly.
Lightweight power screwgun for installing self drilling and self tapping fasteners.
12 13 14
7. 5
Composite panels
1
Order information
2 3 4 5 6 7 8 9 10 11 12 13 14
d KL
Hexagon 8 mm A/F
L
Coloured fastener
VD max. penetration | D panel thickness | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of structure | All measures in mm
Applications
D 42 82 92 102
Application range
D
VD max. steel 2,0 mm
7. 6
Composite panels
1
The secure and speedy way to fix overlapping profiles.
2 3 4 5 6 7 8 9 10 11 12 13 14
The SL self drilling fastener range, specially developed for fixing one metal profile to another, offers decisive advantages in use and in its durability.
The impressive features of the SL fastener Incorrect insertion virtually eliminated 100 % functionality from start to finish EPDM washers ensure effective sealing Ergonomic working with the CF 400 installation tool Increased productivity thanks to magazine-fed fasteners =Time is money !
Self drilling fasteners for fast, efficient overlapping These special fasteners designed specifically for thin overlapping profiles offer a range of benefits. The optimum clamping strength results from careful matching of the tip to the thread diameter. Moreover, the special under-head design inhibits over-torquing as well as self-loosening under dynamic load. Any unevenness in the set is smoothed out by the special soft EPDM sealing washer. So the bond is always safe and secure. Safe and easy installation with the CF 400 installation tool Even working on the roof, a simple extension attached to the CF 400 insertion tool is all that is required to maintain a standing position. And using magazine-fed fasteners really speeds up the whole process.
7. 8
Composite panels
1
SL2-T
2 3
Technical information
Applications
Carbon steel fastening of side laps and flashings. The thread-free zone under the fastener head prevents stripping of the threads in the sheets. The sheets are pulled together tightly, clamped in the thread-free zone and sealed. The fasteners can be used without depth stop or torque coupling.
Material Fastener
4 5 6 7 8
Washer
Drill point
Case hardened, special carbon steel Coloured fasteners available Colour heads are achieved through powder coating
Coloured fastener
HD headform / drive
Hexagon 8 mm A/F
9 10
Automatic setting tool for installing belted fasteners (10 pcs) with a maximum 16 mm diameter washer and upto a maximum length of 40 mm.
Lightweight power screwgun for installing self drilling and self tapping fasteners.
The E480 setting tool is recommended for installing self drilling fasteners with the hexagon head.
11 12 13 14
7. 9
Composite panels
1
Order information
2 3 4 5 6 7 8 9 10 11 12 13 14
d KL
Hexagon 8 mm A/F
L
Coloured fastener
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of structure | All measures in mm
Applications
Application range
VD max. steel 2 x 1,0 mm t min. steel: 2 x 0,4 - 2 x 1,0 mm
7. 10
Composite panels
Carbon steel self drilling fasteners Flatroof insulated panel to steel substructure
SD-D10
1
SD-D10
2 3
Technical information
Applications
4 5 6 7
Washer
HD headform / drive
Low profile 10 mm
8 9
Lightweight power screwgun for installing self drilling and self tapping fasteners.
10 11 12 13 14
Accessories can be found in chapter 12
7. 11
Carbon steel self drilling fasteners Flatroof insulated panel to steel substructure
SD-D10
Composite panels
1
Order information
2 3 4 5
d KL
Low profile 10 mm
L
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of structure | All measures in mm
Applications
SD Type SD
Application range
VD max. steel 3,0 mm
VD
Carbon steel
SD
6 7 8 9 10 11 12 13 14
Accessories can be found in chapter 12
7. 12
Composite panels
1
LS
Product advantages
2 3 4 5
self-adhesive on one side to facilitate application raintight seal permits vapour diffusion easy to compress
Technical information
Applications Material
Colour
The pre-compressed tape is used for sealing joints against driving rain, dust, etc. It is suitable for longitudinal and transverse joints between trapezoidal profiles and sandwich elements.
Technical details
Grey
6 7
Item Class of building material Vapour diffusion resistance Heat resistance Compatibility with building Joint permeability Processing temperature Shelf life Storage temperature Driving rain leak-tightness Weathertightness
Characteristics B2 (normally flammable) 100 30C to +90C granted a 0,1 m3 / [h x m x (daPa)n] +5C to +50C 1 year +1C to +20C
8 9 10 11 12
18055 18542
Order information
Example order code 10/ 2-3 tape width joint height 10/ 15/ 30/ 15/ 10/ 15/ 30/ 2-3 2-3 2-3 3-5 3-6 3-6 3-6
LSType LSLSLSLSLSLSLS-
m/roll 25 25 25 18 13 13 13
13 14
7. 13
Composite panels
1
EB
2 3 4 5
Product advantages
self-adhesive on one side to facilitate application non-compressible dimensionally stable, even at high temperatures
Technical information
6 7 8 9 10 11 12 13 14
Applications
Material
Colour
The dimensionally stable sealing tape is used for thermal separation of structural components, e.g. the top flange of liner trays, to minimise heat build-up.
Technical details
Anthrazit
Item Class of building material Heat resistance Compatibility with building Processing temperature Shelf life Storage temperature Thermal conductivity
Characteristics B2 (normally flammable) 30C to +130C granted +5C to +50C 2 years +1C to +20C B2 (normally flammable)
Order information
Example order code 30/ 3 tape width tape thickness 30/ 60/ 80/ 3 3 3
EBType EBEBEB-
m/roll 30 30 30
7. 14
Composite panels
1
LD
Product advantages
2 3 4 5
self-adhesive on one side to facilitate application good adjustment even with wide joint tolerances especially easy to compress no deformation of the steel profiles leak-tight to driving rain up to600 Pa stress class BG1 airtight seal permits vapour diffusion
Technical information
Applications Material
Colour
The pre-compressed tape is used for airtight sealing of joints, e.g. for longitudinal and transverse liner joints and joints between sandwich elements.
Technical details
Anthrazit
6 7
Item Class of building material Vapour diffusion resistance Heat resistance Compatibility with building Joint permeability Processing temperature Shelf life Storage temperature Driving rain leak-tightness Weathertightness
Characteristics B1 (flame-retardant) 100 30C to +90C granted a 0,1 m3 / [h x m x (daPa)n] +1C to +50C 1 year +1C to +20C
8 9 10 11
18055 18542
Order information
Example order code 10/ 1-3 tape width joint height 10/ 14/ 10/ 10/ 14/ 14/ 18/ 1-3 1-3 1-4 2-6 2-6 3-9 6-18
LDType LDLDLDLDLDLDLD-
m/roll 30 30 22 18 18 12 6
12 13 14
7. 15