Documente Academic
Documente Profesional
Documente Cultură
Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP Slate 2
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB/PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords Gas Discharge Lamps Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Components and waste containing asbestos EL-MF877-00 Template Revision B PSG instructions for this template are available at EL-MF877-01 Page 1 Include the cartridges, print heads, tubes, vent chambers, and service stations. With a surface greater than 10 sq cm All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps 1 1 2
Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Description #1 Motor-screw-driver + Description #2 Motor-screw-driver * Description #3 Motor-screw-driver - Description #4 Description #5 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. 2. 3. 4. 5. 6. 7. 8. Follow steps described in Disassembly instruction (file attached). If parts can be removed without using a tool, remove it first. Use correct screwdriver and torque value before unlock the screw
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Template Revision B PSG instructions for this template are available at EL-MF877-01
Page 2
A. Current station version list Station 1 2 3 Ver. 0.1 0.1 0.1 Station 8 9 10 Ver. 0.1 0.1 0.1 Station 15 16 17 Ver. 0.1 0.1 0.1 Station Ver.
4
5 6 7
0.1
0.1 0.1 0.1
11
12 13 14
0.1
0.1 0.1 0.1
18
19 20 21
0.1
0.1 0.1 0.1
Alicia Chien
Station :
Date
1(1/1)
: 2011/09/19
Step
1. Disassemble Housing (PN:6070B0427802), and put it in the material box. Disassemble Housing in order (Fig.1), the details see Fig.2 and Fig.3. Slide the power button to the mark lock. (Fig.4)
3 Step 1
Fig.1
Fig.2 Step 4
Fig.4
Station :
Date
2(1/1)
: 2011/09/19
Step
1. Put the tablet on the lock screw fixture. 2. Loosen screws--M2*2.5(6052B0120801)*4. (Fig.1) Front Fig.1 3. Loosen screws- M2*2.5(6052B0120801) *2. (Fig.2)
Back
Fig.2
Station :
Date
3(1/1) : 2011/09/19
Step
1. Pull out the Sensor FFC & LCDS cable. (Fig.1/Fig.2/Fig.3) 2. Disassemble panel set and BTCB completely. 3. Put panel set & LCDS cable in material box.
Fig.1
Fig.2
Fig.3
Station :
Date
4(1/1) : 2011/09/19
Step
1. Rip the acid tape on Power/B. (Fig.1) 2. Rip the gasket * 2 and sponge *1. (Fig.2)
Fig.1
Fig.3
Step
1. Rip the gasket * 3 on battery. (Fig.1) 2. Rip the gasket on docking CNTR bracket. (Fig.2) 3. Rip the gasket on Power/B. (Fig.3)
2 1
Fig.1
Fig.3
Station :
Date
6(1/1) : 2011/09/19
Step
1. Rip AL Foil. (Fig.1) 2. Pull out the USB/B FFC ,Home/B FFC from left to right. (Fig.2)
Fig.1
Fig.2
USB/B FFC
Home/B FFC
Station :
Date
7(1/1) : 2011/09/19
Step
1. Pull out the CR/B , MIC/B, Volume/B, FFC from left to right. (Fig.1) 2. Rip the acid tape * 2. (Fig.2)
Fig.1 Fig.2
CR/B
MIC/B
Volume/B
Station :
Date
8(1/1) : 2011/09/19
Step
1. Loosen SPK screw * 4 form right to left. (Fig.1) 2. Pull out the SPK cable from M/B CNTR. (Fig.2)
Fig.1
Fig.2
Station :
Date
9(1/1) : 2011/09/19
Fig.1
Step
1. Rip the gasket marked in red. (Fig.1) 2. Rip the gasket on red cable. (Fig.2)
Fig.2
Fig.3 Fig.4
Station :
Date
10(1/1) : 2011/09/19
Step
2. Loosen Card Reader/B screw * 2, and put the CR/B in material box. (Fig.2)
Fig.2
Station :
Date
11(1/1) : 2011/09/19
Step
1. Loosen WLAN card screw * 2, and put the WLAN card in material box. (Fig.1) 1
Station :
Date
12(1/1)
: 2011/09/19
Step
1. Loosen SSD screw * 2, and put the SSD in material box. (Fig.1) 1 2. Pull out the Power/B cable. (Fig.2) 2
Fig.2
Station :
Date
13(1/1)
: 2011/09/19
Step
1. Loosen M/B screw * 4. (Fig.1) 2. Take out the COVER,PHONE,JACK. (Fig.2)
2 3 4
Fig.1
Fig.2
Station :
Date
14(1/1)
: 2011/09/19
Step
1. Loosen Docking CNTR BRKT screw * 2. (Fig.1) 2. Loosen M/B screw * 2. (Fig.2)
Fig.1 1 2
Fig.2
1 2
Station :
Date
15(1/1) : 2011/09/19
Step
1. Disassemble the battery CNTR from M/B, take out the battery and then put it in material box. (Fig.1)
Station :
Ver. : 0.1 Date
16(1/1) : 2011/09/19
Step
Fig.2
Fig.3
Station :
Date
17(1/1) : 2011/09/19
Step
1. Loosen Volume/B screw * 1. (Fig.1)
Station :
Date
18(1/1) : 2011/09/19
Step
1. Loosen camera screw * 1. (Fig.1) 2. Loosen USB/B screw * 2, put the USB/B in material box. (Fig.2) 3. Put the USB cover in material box. (Fig.3) Fig.1
2 Fig.2
Station :
Date
19(1/1) : 2011/09/19
Step
1. Rip the gasket. (Fig.1) 2. Disassemble WWAN(AUX) antenna. (Fig.2)
Fig.2
Station :
Date
20(1/2) : 2011/09/19
Step
1. Disassemble WLAN ,BT cable. (Fig.1)
Fig.1
Station :
Date
20(2/2) : 2011/09/19
Step
1. Loosen battery screw * 1, take out the MIC/BPower/BWWAN(AUX), put the battery in material box. (Fig.1) 2. Take out the label tray, put it in material box. (Fig.2)
Fig.2
Station :
Date
21(1/1) : 2011/09/19
Step
1. Loosen WLAN (MAIN) screw * 1, take out the antenna. (Fig.1)
Fig.1
Fig.2