Documente Academic
Documente Profesional
Documente Cultură
Base Alkali
pH scale
The pH is a measure of how acidic or alkaline a solution is in water. The pH scale is numbered from 0 to 14:
0 7 14
alkalinity increase
pH 7 is neutral. (Eg. Pure water) pH less than 7 is acidic. The smaller the pH, the more acidic the solution, the more hydrogen ions it contains. Eg. Hydrochloric acid, HCl, ethanoic acid, CH3COOH. pH more than 7 is alkaline. The bigger the pH, the more alkaline the solution, the more hydroxide ions it contains. Eg. Aqueous ammonia, NH3(aq) and sodium hydroxide, NaOH.
Universal indicator
Universal indicator is a mixture that gives different colours at different pH. The pH of solution can be measured by dipping a piece of Universal paper in solution, then compare with the colour chart. Need to know colour changes of phenolphthalein, litmus and methyl orange. Universal indicator is made of several organic dyes, that can produce different colour changes, when either an acid or alkali is added together with the indicator in water. When water is added, the acid molecules ionize to form H+ ions. In a strong acid, all the acid molecules are completely (100%) ionized when dissolved in water. For example: HCl (aq) H+(aq) + Cl-(aq) You illustrate a strong acid by a single arrow in the chemical equation. In a weak acid, the acid molecules are only partially or weakly ionized when dissolved in water. For example: CH3COOH(aq) CH3COO-(aq) + H+(aq) Ethanoic acid You illustrate a weak acid by a double reversible reaction arrow in the equation. The double arrow indicates that the reaction can take place in the forward and backward directions. CH3COOH(aq) molecules, CH3COO- (aq) ions and H+(aq) ions are present in a solution of ethanoic acid. A strong acid contains a higher concentration of H+ ions than a weak acid of the same concentration.
Reactions of acids
3 important reactions (a) Acid + metals Acids (HCl and H2SO4) react with reactive metals (eg. Mg, Zn and Fe) to form a salt and hydrogen only. K, Na and Ca react explosively not allowed in the lab. Al metal is covered by oxide layer. So reaction is slow at first. Mg(s) + 2HCl(aq) MgCl2(aq) + H2(g)
Copper does not react with dilute acids, because copper is an unreactive metal (see Reactivity series in chapter of Metals). (b) Acid - carbonate Acids react with metal carbonates to produce a salt, carbon dioxide and water only. Insoluble carbonates cannot react to produce insoluble salts. Insoluble salts are produced by mixing two (soluble) solutions together. CaCO3(s) + 2HCl(aq) CaCl2(aq) + H2O(l) + CO2(g) CaCO3(s) + H2SO4 (aq) No reaction as CaSO4 is insoluble. (c) Acid alkali (neutralisation reaction) Acids neutralise base/alkalis to form salt and water only. NaOH(aq) + HCl(aq) NaCl(aq) + H2O(l) State symbols should always be added to every equation. (a) Reaction with ammonium salts to produce of ammonia gas. e.g. 2NaOH(aq) + (NH4)2SO4(aq) Na2SO4(aq) + 2H2O(l) + 2NH3(g) How do you test for ammonia gas? Neutralisation reaction Bases react with acids to form salt and water only. This is neutralisation. The ionic equation for all neutralisation reactions: H+ + OH- H2O This shows that it is a reaction between hydrogen ions and hydroxide ions to form water. E.g. NaOH(aq) + HCl(aq) NaCl(aq) + H2O(l) CuO (s) + 2HCl (aq) CuCl2 (aq) + H2O (l) Work out how you can obtain the ionic equation stated above by cancelling out the spectator ions. Spectator ions do not take part in the reaction. Plants need soil of a suitable pH for good growth. Much soil may be acidic due to acid rain. To reduce acidity, calcium oxide (quicklime) or calcium hydroxide (slaked lime) can be added. The reaction that happens is called neutralisation.
Reactions of bases
Effects of pH on soil
Oxides
Both metals and non metals can react with oxygen to form oxides. Oxides can be classified as acidic, neutral, basic or amphoteric. Acidic : Non-metallic oxides - CO2 ,SO2 , NO2, P4O10 Neutral : Non-metallic oxides - CO , NO, H2O Basic : Metallic oxides - Na2O, MgO, CaO etc Amphoteric : Metallic oxides - Al2O3, PbO, ZnO (both acidic and basic properties) Only oxides of Al, Pb and Zn form amphoteric oxides at O levels. The other metallic oxides are basic oxides.
Acidic oxides dissolve in water to produce an acid. Some basic oxides are soluble in water, eg. Sodium oxide, potassium oxide. The other basic oxides are insoluble in water. Basic oxides react with acids to form salt and water only. Amphoteric oxides react with both acids and alkalis to form salt and water. 7.2 Preparation of salts Preparation of The method used to prepare a salt depends on the solubility of the salt. salts
Solubility of salts
Solubility of ionic compounds in water. (a) All Group I and ammonium compounds are soluble. (b) All nitrates are soluble. (c) All chlorides are soluble, except AgCl, PbCl2 (d) All sulfates are soluble, except PbSO4, CaSO4, BaSO4 (e) All carbonates are insoluble, except Group I carbonates and (NH4)2CO3 (f) All oxides and hydroxides of metals are insoluble, except Group I and ammonium compounds and Ca(OH)2 is slightly soluble. (g) All lead compounds are insoluble except for lead(II) nitrate and lead(II) ethanoate. Insoluble salt: Both reactants must be soluble in water. 1. Mix the two aqueous solutions of the reactants together. 2. Filter the mixture to collect the residue (precipitate). 3. Wash the precipitate with distilled water and dry with filter paper.
Precipitation method
Titration method
Soluble salt: By titration only for salts of K+, Na+ and NH4+ . 1. Titrate 25.0cm3 of alkali with acid, with a suitable indicator, usually methyl orange or phenolphthalein. Do not use universal indicator as there are too many colour changes. 2. Note the volume of acid required for neutralisation. 3. Repeat the titration without the indicator. 4. Evaporate to obtain a saturated solution, cool and crystallise to obtain the pure crystals of the salt. Dry the crystals between filter paper.(See chapter 1). Soluble salt: (NOT by titration, ie. For all other soluble salts which are NOT ammonium, sodium and potassium salts) Acid with insoluble oxide/carbonate/metal. 1. Add excess insoluble base/carbonate/metal to warm acid, with stirring, till no more solid can dissolve. 2. Filter to remove excess insoluble base/carbonate/metal. 3. Evaporate the filtrate to saturation. 4. Cool the saturated solution for crystals to form. 5. Filter the crystals, wash with cold distilled water and dry with filter paper.
Reduction
Redox reaction refers to both oxidation and reduction occurring in the same chemical reaction. Types of redox reaction 1. Metal + Dilute acids 2.All combustion reactions ( burning of fuels) 3. Displacement reaction. Takes place when a more reactive element displaces a less reactive ion from its solution. E.g. (a) Chlorine gas displaces iodide ions to become chloride ions and iodine, I2 molecules. (b) Zinc displaces Cu2+ ions from CuSO4 to form Zn2+ and form reddish-brown Cu metal. 4. Extraction of less reactive metals using Blast furnace. E.g. iron from iron(III) oxide by carbon monoxide The list is not exhaustive. When a substance is reduced, it acts as an oxidising agent. Also, an oxidising agent oxidizes another substance. This is usually observed as a colour change. E.g. acidified potassium dichromate(VI), acidified potassium manganate(VII), chlorine Acidified potassium dichromate (VI) Acidified potassium permanganate (VII) CrO42- Cr3+ Orange to green
Oxidation states
MnO4- Mn2+ Purple to colourless When a substance is oxidised, it acts as a reducing agent. Also, a reducing agent reduces another substance. E.g. potassium iodide, carbon monoxide, hydrogen, metals (high in the reactivity series) Potassium iodide 2I I2 Colourless to brown Hydrogen peroxide (H2O2 is both a H2O2 O2 reducing and oxidising agent) You need to know how to calculate oxidation state (number) . Oxidation is the increase in oxidation number of a species. Reduction is the decrease in oxidation number of a species. (1) (2) (3) (4) (5) Oxidation number of an element is zero. Eg. Oxidation number of iron, carbon is zero. Oxidation number of a simple ion equals the charge of the ion, eg. Oxidation number of iron(II) ions, Fe2+, is +2. Oxygen usually has an oxidation number of -2 in compounds. Hydrogen usually has an oxidation number of +1 in compounds. SO42- ion : Oxidation number of sulfur in sulfate = +6 : +6+(-2)4 = -2 (charge on sulfate ion)