Documente Academic
Documente Profesional
Documente Cultură
NEW DEVELOPMENTS, STRATEGIES & TRENDS IN Coatings Printing Inks Adhesives & Sealants Construction Chemicals Production Technology Purchasing Legislation and Regulation Issues Licensing and Technology Transfer
Dr. Barbara Brune Editor in Chief FARBE UND LACK European Coatings Journal Vincentz Network
For the second time, the highly acclaimed session Science Today, Coatings Tomorrow will provide a glimpse into what advanced academic polymer and material science has in store for the coatings systems of the future. Summarising and analysing the most recent legislative developments, a new session will focus on the impact of REACH legislation on formulation developments, highlighting this topic from various angles. A focus session on technology transfer issues will discuss strategies and examples of successful knowledge management, licensing policies and know-how transfer from science to industrial products.
Dr. Dirk Meine Science Editor FARBE UND LACK European Coatings Journal Vincentz Network
Dr. Sonja Schulte Science Project Manager FARBE UND LACK European Coatings Journal Vincentz Network
Another new feature comprises four educational Pre-Congress Tutorials on polyurethane binders, biocides, surfactants, and radiation curing materials, which will take place directly before the main congress, enabling you to refresh your knowledge of the chemistry of these important raw material classes. With this intense and all-encompassing rewiew of current material and process developments, the Nrnberg Congress once more sets out to re-dene the state-of-the-art of coatings, inks, adhesives, sealants, and construction chemicals formulation indeed to formulate the future! Do not miss it see you in Nuremberg!
Kirsten Friedrichs Editor FARBE UND LACK European Coatings Journal Vincentz Network
Congress Partner
COATINGS TECHNOLOGY
HINTERWALDNER CONSULTING
OUR KNOW-HOW - YOUR FUTURE
AT A GLANCE
MONDAY, 7 MAY 2007
8.30 12.00 H 10.30 12.00 H 11.45 12.15 H 12.15 13.30 H Pre-Congress Tutorials I III Pre-Congress Tutorial IV Networking: Light Lunch Plenary Session Welcome Address, Congress Introduction, European Coatings Award, Presentation of Delegates Pre-Congress Survey, Keynote Presentation Networking: Refreshments & Coffee Break Parallel Session I: Science Today Coatings Tomorrow Parallel Session II: Licensing and Technology Transfer Parallel Session III: Nanotechnology Parallel Session IV: Powder Coatings Parallel Session V: Measurement & Testing Forum Technology Transfer Poster Session Networking: After Work Party
Page
PRE-CONGRESS TUTORIALS
4 Not a coatings expert yet? Our new Pre-Congress Tutorials, taking place immediately before the start of the main congress, will try to change that at least for some important specic coatings topics. Presented by renowned international experts, the tutorials will build up, or refresh, your knowledge on the fundamentals of their respective topics, providing a concise review of the basic chemistry and physics involved, in an intense, interactive working atmosphere. They will thus help you to follow and evaluate the high-level presentations of the main congress more easily, and also to meet with exhibitors at the European Coatings Show backed by a more profound knowledge base.
Please note that the Pre-Congress Tutorials and the main Congress are two individual events. Participation is limited at the exclusive tutorials and will be reserved on a rst come, rst served basis. Extraregistration is absolutely necessary.
10
12
The latest programme including abstracts of all papers, any new speaker or changes to schedules can be viewed on our website:
14
PRE-CONGRESS TUTORIALS
PRE-CONGRESS TUTORIAL I 8.30 12.00 H BIOCIDE BASICS
Lecturer: Peter Askew, Industrial Microbiological Services Ltd., GB Especially in waterborne formulations, biocides are a very important class of additives, but their efcient use requires some special know-how. In addition, with the provisions of the European Biocidal Products Directive about to come into force, the choices of available biocides will very probably be reduced in the future. Our concise three-hour pre-congress tutorial provides you with an opportunity to learn about the basic materials and concepts that are at work in modern biocide systems for coatings and related applications, for both in-can and lm preservation. It focuses on industrially important biocides, and their use in various waterborne or other coatings systems. Also, the most common test methods that are employed to check biocidal activity will be discussed. Specically, the tutorial will address the following topics:
PRE-CONGRESS TUTORIAL III 8.30 12.00 H THE CHEMISTRY OF RADIATION CURING COATINGS
Lecturers: Dr. Kurt Dietliker, Dr. Katia Studer, Ciba Speciality Chemicals, CH Volume-wise, radiation curing systems still represent a small segment of the coatings world, but they feature some of its highest growth rates. This is driven by the economical and ecological advantages they offer, and by a rapid development of their technical performance, placing them among the most interesting coatings systems, technology-wise. If you are not familiar with the chemistry and photochemistry of radiation curing coatings, our concise and intense three-hour pre-congress tutorial will change that. It offers you an opportunity to learn the basics of the concepts and chemistries that are employed in radiation curing formulations. It will review the materials used in UV curing coatings, and how these materials interact in 100% or in waterborne systems, for the most important end user applications. The tutorial will address the following questions:
polyisocyanates and their characteristic properties? cidal action What are the characteristic features of polyol The chemistry of common industrial biocides components that are in use for coatings and biocide systems for coatings applications applications (polyether, polyester, polyboth for in-can and lm preservation acrylate polyols)? Which system is commonly used for which How do these components inuence the specic application and why? coatings performance? Which combinations are suitable for which applications and why? What implications do specic biocide systems have on the formulation of the corresponding What are the specic characteristics in the coatings? binder chemistry of What are the state-of-the-art test methods to 1K and 2K solventborne PUR coatings judge the efciency of biocides in coatings 1K and 2K waterborne PUR coatings formulations? UV curing PUR coatings PUR powder coatings Peter Askew has been working as a microbiologist dual cure systems since 1977, rst in the food industry, before joining the microbial ecotoxicology unit of ICIs agrochemicals business. In 1988 he became company microbiologist Simon Waddington is C.A.S.E. Market Developfor ICI Paints. In 1996, he formed IMSL Industrial ment Leader Polyurethanes at Dow Europe GmbH Microbiological Services Ltd., a specialised micro- in Horgen, Switzerland. biological testing and consultancy service based in laboratories and ofces near Fleet, UK, with ofces Ian Rimmer has worked in the Polyurethanes Indusalso in Berlin, Germany. Pete is a member of all of try for 19 years, initially as a development chemist the major microbiological societies and is Secre- for elastomers, coatings and adhesives. Since three tary General of the International Biodeterioration years, he has been Sales Manager (UK & Nordic) for Research Group. He is also an Associate of the Oil and the Adhesives, Coatings & Elastomers division of Colour Chemists Association and is the consultant Huntsman Polyurethanes. to the OECD on treated articles.
curing systems today? Which binder materials are used in typical radia tion curing coatings, and what parameters determine their performance? Which are the most important types of photoinitiators, how do they work, and how do they differ? Which types are usually used for which specic applications and why? How do free radical and cationic curing mechanism differ? What are the pros and cons of both methods? What determines the use and the choice of reactive diluents? How do they inuence the coatings characteristics? How can optimal curing and coatings performance be achieved for typical applications? Dr. Kurt Dietliker is a Senior Research Fellow with Ciba Specialty Chemicals in Basel, Switzerland. He has been involved in photoinitiator research since 1983. Dr. Katia Studer completed her PhD thesis on UV and thermal curing of acrylic coatings in 2004 under the direction of Prof. Christian Decker. The same year, she joined Ciba Specialty Chemicals as a Post Doc and received a permanent position in 2005. She is currently technical specialist in the New Technologies group.
MONDAY MORNING
PRE-CONGRESS TUTORIAL IV 10.30 12.00 H SURFACTANTS IN WATERBORNE FORMULATIONS
Lecturer: Samuel P. Morell, S.P. Morell and Company, US A major challenge within the coatings and ink industries is to develop waterborne systems that replace conventional solventborne ones, complying with increasingly restrictive governmental regulations on volatile organic compounds. However, the technological switch from solventborne to waterborne technologies is not an easy one. Challenges may concern application, performance or formulation characteristics and often have to do with the control of surface and interface properties. Examples are wetting of low energy surfaces, foaming, water sensitivity, rheology, ow and leveling. To optimise these properties, the control of surface tensions and surface energies is of major importance. This is the domain of surfactants. Our 90 minute tutorial will review the chemistry, theory and application of surfactants in a wide range of waterborne applications. Specic questions that will be addressed include:
Plenary Session
12.15 13.30 H
Chairman: Dr. Barbara Brune, Vincentz Network, DE of ultrahigh molecular weight polymers from functional monomers, such as acrylates, methacrylates, and vinyl halides, initiated with alkyl, sulfonyl and N-halides. Can this technique pave the way for large-scale industrial applications of controlled radical polymerisation products, then? Is this the breakthrough that will lead to a completely new generation of coating binder systems? In his keynote lecture at the plenary session of the Nrnberg Congress, Virgil Percec will explain the scope and the limitations of the SET-LRP technique in comparison with ATRP, and examine its industrial application potential. Virgil Percec was born in Romania and received his Ph D in Macromolecular Chemistry at the Polytechnic Institute of Iasi, Romania in 1976. From 1976 until 1981 he worked as a Research Associate, Senior Research Associate and Associate Professor at the same institution. As a postdoctoral Research Associate he worked at the Universities of Freiburg (Germany) and Akron (US). In 1982, he started as an Assistant Professor at the Case Western Reserve University in Cleveland, where he became Professor of Macromolecular Science as well as an American citizen in 1986. From 1993, he held the Leonard Case Jr. Chair of Macromolecular Science and Engineering at that institution. Since 1999, he is Roy and Diana Vagelos Professor of Chemistry at the University of Pennsylvania in Philadelphia (USA). Professor Percec has been visiting professor at a member of universities, societies and Institutes including the Royal Australian Chemical Institute, the University of Freiburg, the Royal Society of Chemistry, The Royal Institute of Technology, Stockholm and the Max Plank Institute for Polymers in Mainz. He published over 575 refereed publications and 35 US and European Patents, edited ten books and is currently ranked no 215 among the most cited chemist in the world. He is Editor of the Journal of Polymer Science and is or has been Member of the Editorial Boards of a variety of other scientic polymer journals. In 1997, Virgil Percec was the recipient of the Humbold Research Award for Senior U.S. Scientists. Two times (1990 & 1995) he won the NSF Research Award for Exceptional Creativity in Research and in 2004 he received the ACS Award in Polymer Chemistry. He also won faculty awards of 18 international companies, including Amoco, Asahi Chemical Co., Bayer, BASF, DuPont, Hoechst and PPG. In 2005, he won the Staudinger-Durrer Medal from the ETH Zrich, Switzerland.
12.15 12.45 H WELCOME ADDRESS, CONGRESS INTRODUCTION, EUROPEAN COATINGS AWARD, PRESENTATION OF DELEGATES PRE-CONGRESS SURVEY 12.45 13.30 H KEYNOTE PRESENTATION
Ultrafast Synthesis of Ultrahigh Molar Mass Polymers by SET-LRP of Acrylates, Methacrylates and Vinyl Halides at Room Temperature Virgil Percec, University of Pennsylvania, US Controlled, or living radical polymerisation (LRP) methods have fascinated the community of polymer chemists for a number of years, because these techniques provide a previously unthinkable control over the molecular structure of large macromolecules, and effectively allow the design of novel copolymer architectures from scratch. Of course, this is a highly exciting vision for industrial chemists as well, especially in the coatings industry: Just imagine being able to build almost monodisperse polymeric binders or additives, with just the molecular structure and size that you wish it to have. However, very few products of such techniques have made it to industrial products in the coatings world, dispersing additives so far are the only examples. This has probably been due to a drawback of LRP methods, including atom-transfer radical polymerisation (ATRP): These methods usually require high amounts of expensive metal catalysts, usually Cu(I)X species and N-containing ligands, which are difcult to remove from the products and make the syntheses expensive. Also, the processes tend to be very slow. Very recently, however, Virgil Percec and his coworkers at the University of Pennsylvania found a way to overcome these drawbacks, when they discovered that polar solvents can be used to disproportionate the Cu(I) moieties, forming nascent and extremely reactive atomic Cu(0) and Cu(II) species. These facilitate an ultrafast living radical polymerisation, proceeding by what Percec has termed a low activation energy heterolytic outersphere single-electron-transfer (SET) mechanism. The resulting SET-LRP process requires only a catalytic amount of the copper species and provides, at room temperature and below, an ultrafast synthesis
What are typical chemical structures and properties of both nonionic and ionic surfactants?
surface tension reduction, macro- and microfoam reduction and control, wetting of low energy substrates, e.g. plastics, pigment dispersion and stabilisation, improvement of water resistance? How do surfactants affect rheological behaviour? What are the VOC implications of surfactant use? Samuel P. Morell is a Chemical Engineering graduate of New York University and founder and president of S.P. Morell and Company. His work experience includes both technical and marketing positions at Ciba Specialty Chemicals, Rohm and Haas, BASF and Air Products and Chemicals. Sam Morell is a recognised authority on surfactants and has been instrumental in promulgating the use of specialty surfactants to a wide array of industries including coatings, inks, adhesives and lubricants. He has authored numerous technical articles on the subject in various publications.
PARALLEL SESSIONS IV
PARALLEL SESSION I SCIENCE TODAY COATINGS TOMORROW
Chairman: Prof. Dr. Claus D. Eisenbach, Research Institute for Pigments and Coatings, DE
Day-to-day coatings development often is somewhat restricted to nding specic solutions to specic industrial problems, but what will coatings technology look like in, say, ten years from now? This is the realm of todays advanced material science and of the special session Science Today Coatings Tomorrow, where globally renowned academic materials researchers share their recent research results, take an inspiring deeper look into the molecular interactions in polymers and coatings, and present their visions of the technological future of organic coatings. II.1 14.00 14.30 H Specically, this years session will address Buyer Beware and Seller Prepare: Improving the Likelihood of Forming an Academic-Industrial The details of latex lm formation License Partnership Spherical polyelectrolyte brush core/shell latexes and their use in biological appliProf. Gordon P. Bierwagen*, Kevin K. Crawford, cations? Phillip Boudjouk, Dante Battocchi, Roger Brown, John Grifn, North Dakota State University, US Functional nanoparticles made from mini emulsion polymerisation or covalently built II.2 14.30 15.00 H dendrimers Distribution via a Network of Licensees: Novel linear block-copolymers, with a molecular Decorative Solutions on Polyacetal Resin control of their composition Alexandra Fabbro, DuPont Engineering Polymers, CH Polymer chemistry and biological surfaces II.3 15.00 15.30 H I.1 14.00 14.30 H Research and Technology Transfer with Russia Molecular Aspects of Latex Film Formation Prof. Dr. Mitchell A. Winnik, University of Toronto, CA and China Dr. Christoph Grtler*, Dr. Thomas Rlle, Bayer I.2 14.30 15.00 H MaterialScience , DE Smart Latex Particles Synthesis and Properties 15.30 16.00 H Prof. Dr. Matthias Ballauff, University of Bayreuth, DE Networking: Refreshments & Coffee Break I.3 15.00 15.30 H Organic Functional Nanoparticles Prof. Dr. Klaus Mllen, Max-Planck-Institute for Polymer Research, DE 15.30 16.00 H Networking: Refreshments & Coffee Break I.4 16.00 16.30 H Functionality in Polymer Complexes and Thin Films Prof. Dr. Martin Mller, RWTH Aachen University, DWI e.V., DE I.5 16.30 17.00 H Synthesis and Self-Assembly of Block Copolypeptide Surfactants Prof. Dr. Timothy J. Deming, University of California, US I.6 17.00 17.30 H Tailoring the Material-Biology Interface Prof. Dr. Christopher K. Ober, Cornell University, US
II.4 16.00 16.30 H Doing Business in China: Opportunities and Challenges for European Companies Ting Zhang, China Business Solutions, CN II.5 16.30 17.00 H Technology Transfer Between Academia and Industry from a Small Business Perspective Victor P. Janule, SensaDyne Instrument Division, US
The latest programme including abstracts of all papers, any new speaker or changes to schedules can be viewed on our website:
SESSIONS VI XI
PARALLEL SESSION VI PRINTING INKS 1
Chairman: Dr. Erich Frank, Flint Group, DE; Dr. Dirk Meine, Vincentz Network, DE The two sessions VI and IX with altogether 11 papers address the current situation and recent raw material innovations concerning the entire range of printing inks. Session VI concerns classical printing techniques (offset and liquid inks). This is kicked off with a rather political topic the situation of printing inks for food applications, which has been severely under debate recently. Turning to raw material innovations, the focus of current developments clearly is on the resins, driven, for instance, by progress in renewable resources or by constantly increasing performance demands. VI.1 9.00 9.30 H Printing Inks for Food Packaging A Developing Situation Chris Whitehead, EuPIA/Flint Group (UK) Ltd., BE VI.2 9.30 10.00 H Resins for Offset and Publication Gravure Inks: What Happened in the Past 5 Years and What do We Expect for the Next 5 Years? Hans Pardoen, Hexion Specialty Chemicals, NL VI.3 10.00 10.30 H Video Investigation of Ink Emulsions on Heat-set Web-offset Printing Presses Dr. Uwe Bertholdt, Graphic Technology Research Association FOGRA, DE 10.30 11.00 H Networking: Refreshments & Coffee Break VI.4 11.00 11.30 H Offset Ink Solvents from Renewable Resources From Lab Curiosity to Top Seller Dr. Jrgen Baro*, Peter Bene, Cognis Deutschland GmbH, DE VI.5 11.30 12.00 H Self-initiating UV Curable Acrylate Resins Innovative Approaches for Low Extractable Printing Systems Hilbert Esselbrugge*, S. Zhang, M. Gould, M. Sheridan, S. Ananthachar, A. Romano, R. de Bruijn, Ashland B.V., NL VI.6 12.00 12.30 H Advances in Water-based Pigment Grind Resins Allows for Optimising Pigment Concentrate Performance as well as Optimising Factory Throughput Martin Bek, BASF Resins B.V., NL 12.30 14.00 H Networking: Lunch Break & Refreshments
Chairman: Dr. Ad Overbeek, DSM Coating Resins, NL In anticorrosive coatings, the need for more envi- The coating of plastics poses some of the biggest chalronmentally friendly, chromium-free and low VOC lenges their very low-surface energy, tends to make With waterborne coatings being established in a systems has pushed the industry to look primarily coatings adhesion difcult, and they usually require variety of applications, there are still some concerns at waterborne and powder technology as alterna- adhesion primers or physical pre-treatments, which regarding their performance in comparison with tives to solvent based products and to replace chro- have to be adapted to the specic substrate. As for pre- their older, solventborne counterparts. Examples are mium-containing primers. Novel materials include treatment techniques, atmospheric plasma methods improvable open time characteristics, details of the waterborne epoxies, nano-zinc pigments which allow are currently being put forward as new and highly effec- appearance, the adhesion on difcult substrates, or considerable reductions in the zinc-concentration, or tive methods. Another major issue concerns outdoor anti-corrosion performance. New results concerning functional ller approaches. Other concepts involve environments, where the suns UV irradiation has to binder development as well as novel additive packUV curing systems for industrial coatings, or novel be prevented from destroying the substrate. An intel- ages are being presented in this session, with the ideas for self-healing anticorrosion coatings that are ligent light protection is essential. Also, the trend to promise of tackling and solving such problems. create coatings with added functionality has reached XI.1 capable to react to damage. 9.00 9.30 H the coatings for plastics sector: Examples include novel New Insights in Formulation Factors Inuencing IX.1 9.00 9.30 H easy-to-clean and soft-feel coatings. the Open Time of Waterborne Trim Paints Novel Radiation Curable Resins for Coating of Metallic Substrates X.1 9.00 9.30 H Dirk Mestach*, Wincent Pilaszek, UV Protection of Substrates Being Light Sensitive Robert van Egmond, Martin Bosma, Dr. Kris Verschueren, Cytec Surface Specialties, BE Towards 400 nm and Above Enrico Rensen, Nuplex Resins BV, NL IX.2 9.30 10.00 H Dr. Adalbert Braig*, Dr. Christian Schaller, XI.2 9.30 10.00 H Self-healing Concepts for Protective Coatings Ciba Speciality Chemicals, CH Enhancing the Performance of Low VOC Aqueous Dr. Ulrike Mock*, Stephan Tillner, Dr. Volkmar Coatings Utilizing a Unique Wetting Additive X.2 9.30 10.00 H Stenzel, Fraunhofer IFAM, DE Radiation Curable Resins for Plastic Exterior Robert T. Miller*, Sheila Belding, Dale Lyman, IX.3 10.00 10.30 H Applications Syed Kazmi, Pravin Patel, Troy Corporation, US Waterborne Epoxy Anti-Corrosion Paints: Phillippe de Groote*, Dr. Steven Cappelle, XI.3 10.00 10.30 H The Right Formulation to Achieve Superior Cytec Surface Specialities, BE The Next Generation Superwetter for Performance High Performance Waterborne Coatings X.3 10.00 10.30 H Francoise Heine*, Jean Rivire, Karin Van Poppel, Spectral Sensitivity of Polymeric Degradation & Laurent Herschke*, Ingrid Meier, Pascale Claeys Bouuaert, Dominique VandenSpectral Efciency of Stabilizers Air Products & Chemicals Inc, NL berghe, Hexion Specialty Chemicals, BE Anja Geburtig*, Volker Wachtendorf, Federal Institute 10.30 11.00 H 10.30 11.00 H for Materials Research and Testing, DE Networking: Refreshments & Coffee Break Networking: Refreshments & Coffee Break 10.30 11.00 H XI.4 11.00 11.30 H IX.4 11.00 11.30 H Networking: Refreshments & Coffee Break Preparation of Fluorinated Additives for Properties of Anti-Corrosion Paints based on Matt Latex Paints X.4 11.00 11.30 H Nano Zinc Metal Powder Atmospheric Plasma A New Surface Treatment Jorge Moniz*, Filomena Braga, Joana Branquinho, Pascal Verbiest*, Libuse Hochmannova, Technology for Promoting Coating Adhesions Susana Carvalho, Helena Gil, Fernanda Oliveira, Umicore, BE Resiqumica-Resinas Qumicas, S.A., PT Rory A. Wolf*, Rick Elwanger, Enercon Industries IX.5 11.30 12.00 H Corporation, US XI.5 11.30 12.00 H Mg-rich Primer for Totally Chromate Free Corrosion Inhibitors for Waterborne Alkyds X.5 11.30 12.00 H Protective Systems on AI Alloys Development of an Easy-to-Clean Coating for Dr. Tony Gichuhi*, Wendy Novelli, Saner Poplata, Dante Battocchi* , Gordon Bierwagen1, Grafti Protection of Plastic Substrates Andrew Thorn, Melissa DeGroot, Halox, US Mark Zentner2, Roger Brown2 1 Dr. Claudius Neumann*, Dr. Patrick Becker, XI.6 12.00 12.30 H North Dakota State University, US, 2 Dr. Thomas Hakerl, Waldemar Kanzler, Formulating for Optimum Rheology in Akzo Nobel Aerospace Coatings, US Margarita Stein, Ghirmay Seyoum, Degussa, DE Waterborne Coatings IX.6 12.00 12.30 H X.6 12.00 12.30 H Daniel Saucy*, Barrett Bobsein, Rohm and Haas Optimization Potential with Functional Fillers Widening the Application Field of Soft Touch Company, US in Two-component Polyaspartic Anti-Corrosion Coatings Coatings 12.30 14.00 H Dr. Thomas Fcke*, Uwe Klippert, Bodo Essen*, Hubert Oggermueller, Networking: Lunch Break & Refreshments Bayer MaterialScience, DE Hoffmann Mineral GmbH, DE 12.30 14.00 H 12.30 14.00 H The latest programme including abstracts Networking: Lunch Break & Refreshments Networking: Lunch Break & Refreshments of all papers, any new speaker or changes to schedules can be viewed on our website:
Polyurethane-, acrylic- or polyvinylacetate-based Reporting on further innovations for construction adhesives are within the focus of the second chemicals formulations, the second session features adhesives session, discussing new concepts for ve contributions focusing on: improved binder materials, on structure-property starch ethers and their improvement for mortars relationships as well as on HSE aspects. In addiand concrete admixtures tion, innovative analysis methods are highlighted controlling the drying kinetics of cements with that allow to study in detail the lm formation and optimised cellulose ethers curing of adhesives formulations, providing a deeper granulated/encapsulated silicone species and understanding of these processes. their use for the hydrophobisation of cementiXIII.1 14.00 14.30 H tious materials, aiming at improved ready-to-use Naphthenic Plasticizers in Diaper Adhesives dry-mixes Anita Neau*, Anna Eriksson, Nynas, FR the curing mechanisms and fractionation effects XIII.2 14.30 15.00 H in polymer-modied thin-bed mortars The Relationship between Rheological Proper the effects of latex addition and latex microstructies and Spraying Behaviour of Polyurethane ture as well as their physico-chemical properties Adhesive Dispersion on the performance of cementitious mortars. Dr. Dirk J. Dijkstra*, Dr. Wolfgang Henning, XIV.1 14.00 14.30 H Bayer MaterialScience, DE Innovative Starch Ethers Optimise Dry Mortar and XIII.3 15.00 15.30 H Concrete Properties Risk Calculation of Isocyanate Emission Dr. Jacob Terpstra*, Hylke Simonides, AVEBE, NL at Workplaces during Processing Reactive XIV.2 14.30 15.00 H Polyurethane Adhesives Inuence of Cellulose Ethers on the Kinetics Jasmin Trautmann*1, Thomas Hensel2 of Early Portland Cement Hydration 1 Fraunhofer Institute for Manufacturing TechnolIngo Mller, Hercules GmbH, DE ogy and Applied Materials Research, DE; 2 InstituXIV.3 15.00 15.30 H tion for Statutory Accident Insurance and PrevenGranulated/Encapsulated Silicones as Additives tion in Printing and Paper Converting Industry, DE for Cement 15.30 16.00 H Jean-Paul Lecomte*, Andreas Stammer, Marc Thibaut, Networking: Refreshments & Coffee Break Dow Corning, BE XIII.4 16.00 16.30 H 15.30 16.00 H Beyond Wood Failure: Correlations between Networking: Refreshments & Coffee Break Physical-chemical Structure and Mechanical XIV.4 16.00 16.30 H Properties of Polyvinyl Acetate-based Adhesives Functionalities of Organic Additives and Resulting 1 1 1 2 Maria Ripamonti* , S. Paffumi , F. Abb , A. Bravo , Surface Properties of Polymer-modied Mortars M. Decio2, T. Cerulli2 Roger Zurbriggen*1, M. Herwegh1, T. Aberle1, 1 2 Vinavil S.p.A., IT; Mapei S.p.A., IT A. De Gasparo2, A. Jenni2 XIII.5 16.30 17.00 H 1 Elotex AG, CH; 2 Institute of Geological Sciences, Monitoring of Film Formation, Cure and Ageing University of Berne, CH of Adhesives and Coatings by Ultrasound XIV.5 16.30 17.00 H Dr. Ingo Alig*, Dirk Lellinger, Harald Oehler, On the Benets of Polymeric Admixtures in German Institute for Polymers, DE Cementitious Materials XIII.6 17.00 17.30 H Ulrike Peter, Mustapha Sari, Hexion Specialty Curing Behavior and Process Optimization Chemicals, FR of Reactive Adhesives by Thermoanaytical Techniques and Kinetic Analysis Stephan Knappe, Netzsch-Gertebau GmbH, DE
10
The latest programme including abstracts of all papers, any new speaker or changes to schedules can be viewed on our website:
11
analysis and integrated software solutions for more effective production process control semi continuous or fully continuous operation vs. batch-wise production sustainability analyses and their usefulness in the coatings manufacturing process XVIII.1 9.00 9.30 H What Precisely are Customers Product Needs? A Perspective from a TiO2 Supplier Dr. Stefan Niedoba*, Gary Yorke-Robinson, Michael Binns, Millennium Chemicals, BE XVIII.2 9.30 10.00 H Utilisation of Multivariate Data Analysis in Fillers Selection for the Paint Industry Carlos Otavio Petter*, Paulo Ricardo Nunes Conceicao, Federal University, UFRGS, BR XVIII.3 10.00 10.30 H Optimized Process Solutions for Specic Demands in Combination with Traditional Batch Plants Dr. Bernhard Stalder, Bhler AG, CH 10.30 11.00 H Networking: Refreshments & Coffee Break XVIII.4 11.00 11.30 H Conversion of Tinting Systems Guido Strauch, Protec Systempasten GmbH, DE XVIII.5 11.30 12.00 H Using the Eco-efciency Analysis in the Sustainability Assessment of Chemical and Technical Processes Dr. Peter Saling, BASF AG, DE XVIII.6 12.00 12.30 H Planetary Mixer for the Production of Silicone Masses Johannes Popp*, Wolfgang Stadlbauer, Netzsch-Feinmahltechnik GmbH, DE 12.30 14.00 H Networking: Lunch Break & Refreshments
12
used in the production of products in a viscosity range from 1 Pas to more than 5.000 Pas Automated handling tools for non-free-owing solids A novel, shear-free dispersion process and its uses for more effective coatings production Processes to achieve an effective and stable dispersion of nanoparticles XXII.1 14.00 14.30 H The Modular Coatings Production Facility: A Vision Turns into Reality Ralf Hohmann, Hemmelrath Coatings, DE, XXII.2 14.30 15.00 H Stable and Reproducible Grinding Processes in R&D, even with the Smallest Grinding Media Dr. Frank Lang, Willy A. Bachofen AG, CH XXII.3 15.00 15.30 H A Present-day Approach to Handling Non-freeowing Bulk Solids in the Paint and Surface Coatings Industry Manfred Hnggi, Ipswiss, CH 15.30 16.00 H Networking: Refreshments & Coffee Break XXII.4 16.00 16.30 H A New, Shear-free Dispersion Process for Automated Production Peter Schertenleib, Netzsch-Feinmahltechnik GmbH, DE XXII.5 16.30 17.00 H Efciency and Characteristics of Different Machines for Dispersing Nanoparticles Dr. Arno Kwade*, Carsten Schilde, Kwade + Schwedes Zerkleinerungstechnik, DE
The European REACH legislation, meaning the RegThe stabilisation of pigment and other solid particles istration, Evaluation and Authorisation of Chemicals, in aqeuous, solventborne or UV curing coatings meanwhile is beginning to take effect: The nal regulais a prerequisite for good performance. Polymeric tory statutes of REACH are likely to come into force in dispersants are state-of-the-art, but the key is June 2007. It is therefore high time to prepare for the in their specic design. Using controlled radical consequences of this far-REACHing legislation. Propolymerisation and modern methods of analys- viding information and viewpoints from all industrial ing structure-property relationships, new, highly parties involved, the REACH session will explain the tailored dispersants have been designed, signi- major points of the nalized REACH programme, the cantly improving the performance. Colour strength challenges it poses to raw material suppliers, formulaand dispersion stability have been improved, but tors and further downstream users, as well as discuss the agents also feature reactive centres, allowing possibilities for collaboration between all parties them to be built into the binder matrix, thus reduc- involved to minimise the economic burden which will ing emissions. Specic developments address the have to be shouldered. dispersion of nanoparticles to optimise their effects XXIV.1 14.00 14.30 H in coatings formulations. Is Your Company Prepared for REACH? XXIII.1 14.00 14.30 H The Importance of the Particle Stabilization Mechanism on the Performance of Waterborne Pigment Dispersants Dr. Clemens Auschra*, Frank Pirrung, Peter Harbers, Lothar Engelbrecht, Marcel van der Sluis, Ciba Speciality Chemicals, CH XXIII.2 14.30 15.00 H Design of Pigment Dispersants New Options for the Future Dr. Ian Maxwell*, Dr. Stuart Richards, Dr. Andrew Shooter, Noveon, GB XXIII.3 15.00 15.30 H Solutions to Colourful Problems with Novel Pigment Dispersing Technology Wim Peter Stout*, Michael K. Peck, Air Products and Chemicals Inc., NL 15.30 16.00 H Networking: Refreshments & Coffee Break XXIII.4 16.00 16.30 H Polyetheralkanolamine Comb Polymers: Novel Wetting and Dispersant Additives for Pigmented Coating Compositions Duy T. Nguyen, Huntsman Corp., US XXIII.5 16.30 17.00 H The Development of New SMA Esters as Pigment Dispersants for Waterborne Coatings and Inks Dr. William R. Dougherty*, Robert B. Adams, Disa Grant, Lisa Fine, Sartomer Company, Inc., US XXIII.6 17.00 17.30 H Nanoparticle Dispersions as Unique Additives to Impart Novel Properties in Coatings: The Importance of High Quality Dispersions Dr. Detlef Burgard*, Frank DiStefano, Charlie Hegedus, Lisa Mercando, Frank Pepe, Air Products and Chemicals, Inc.; c/o Nanogate Advanced Materials GmbH, DE Dr. Jacques Warnon, CEPE The European Council of the Paint, Printing Ink and Artists Colours Industry, BE XXIV.2 14.30 15.00 H How may Downstream Users Assist their Suppliers in the Preparation of a Registration? Kerstin Heitmann*, Antonia Reihlen, kopol GmbH, DE XXIV.3 15.00 15.30 H The Impact of REACH on Pigment Production and Pigment Use Dr. Erwin Dietz, Clariant GmbH, DE 15.30 16.00 H Networking: Refreshments & Coffee Break XXIV.4 16.00 16.30 H Impact of REACH on Middle-sized Companies Importing Raw Materials from Outside the EU Dr. Heiko Thoms, Lehmann & Voss & Co. KG, DE XXIV.5 16.30 17.00 H REACH Dialogue between Suppliers and Downstream-users of Chemical Substances Dr. Siegfried Wallat, Cognis GmbH & Co. KG, DE
14
15
Top-notch speakers
The following leading companies and institutes will show you their new developments, strategies and trends and how to solve the technical problems you are facing:
Air Products & Chemicals Inc. Akzo Nobel Coatings Arkema, Inc. Artikol Ashland AVEBE BAM BASF AG BASF Construction Chemicals (Schweiz) AG BASF Resins B.V. Bayer MaterialScience AG Becker Industrial Coatings Ltd. Bhler AG BYK Chemie GmbH BYK-Gardner CEPE ChemInvest GmbH ChemQuest Europe China Business Solutions Ciba Specialty Chemicals Inc. Clariant GmbH Clariant International Cognis Deutschland GmbH & Co.KG Collano AG Conmet GmbH Cornell University CPS Color Cray Valley Cytec Surface Specialties Degussa GmbH Dow Corning Dow Europe GmbH DSM Coating Resins DSM NeoResins DuPont Performance Coatings DuPont Powder Coatings Scandinavia AB DuPont Surface Protection Solutions DuPont, Functional & Aesthetics on DuPont EP Dyrup Eastman Chemical Company Industry LLC Eliokem 16 Elotex AG Enercon Industries Corporation Flint Group Focus Air Conditioning Fraunhofer Institute for Wood Research Gebr. Mankiewicz German Institute for Polymers Halox Hemmelrath Coatings Hercules GmbH Heubach GmbH Hexion Specialty Chemicals Hinterwaldner Consulting & Partner Hoffmann Mineral GmbH & Co KG hte-Aktiengesellschaft Huntsman Corp. Huntsman Pigments Huntsman Polyurethanes IFAM-Institute for Manufacturing Technology and Applied Materials Research IKEA of Sweden Industrial Copolymers Limited Industrial Microbiological Services Ltd. Ingtec-Pneumacon AG Innowep GmbH Institute for Surface Modikation Jotun Coatings Karlsruhe Institute of Technology, Chemical Engineering Institute Lehmann & Voss & Co. KG Max-Planck-Institute for Polymer Research Merck KGaA Millenium Chemicals NANO-X GmbH Nanogate Advanced Materials GmbH NETZSCH-Feinmahltechnik GmbH NETZSCH-Gertebau GmbH North Dakota State University Noveon Nuplex Resins BV Nynas kopol Omya Peralta GmbH Paint Research Association Perstorp Specialty Chemicals AB Rembrandtin Lack GmbH Research Institute for Pigments and Coatings Resiqumica Resinas Quimicas, S.A. Rockwood Clay Additives GmbH Rohm & Haas France S.A.S Rohm and Haas Company RWTH Aachen University, DWI e. V. Sachtleben Chemie GmbH Sartomer Company, Inc. SensaDyne Instrument Division S.P. Morell and Company Technical University at Brunswick, Institute for Particle Technology Technical University of Szczecik, Institute of Chemical Organic Technology Tego Chemie Service (Degussa) The Shepherd Color Company TIMCAL Ltd. Tolsa S.A. Troy Corporation UFRGS Umicore Uniqema University of Bayreuth, Institute for Physical Chemistry University of California, Dept. of Bioengineering University of Hanover, Institute for Vocational Science in the Building Trade University of Pennsylvania University of Stuttgart, Institute for Polymerchemistry University of Toronto Dept. of Chemistry Vinavil S.p.A. Wayne Pigment Corp. Willy A. Bachofen AG Maschinenfabrik Yasar Paint and Chemicals Group YKI, Ytkemiska Institutet AB
For further questions and individual offers please contact our service partner at: Business & Service Brigitte Schmedding Exhibition events Messezentrum 90471 Nuremberg, DE Phone +49 9 11.86 07 6-0 Fax +49 9 11.86 07 611 info@business-und-service.de www.business-und-service.de
17
Title e-Mail Company Department (if applicable) Street Zip Code, City Phone
First Name
Last Name
Country Fax
REGISTER ON-LINE!
www.coatings.de/ecs07
Stated congress fees are net prices. 19% German VAT has to be added. The total amount incl. 19% German VAT must be paid by all delegates from any country. In some cases the VAT is refundable.
Discounts
Companies who are exhibitors at the EUROPEAN COATINGS SHOW 2007 or members of one of the following associations will be given a 10% discount off the standard fee. *I am exhibitor/member of y Exhibitor of ECS 2007 y EuPIA y PRA y F.E.I.C.A y FPL
Methods of Payment
y Please send invoice y Credit Card Card Number
University Members
On-site fee: +15 %
I y 300
II y 300
III y 300
IV y 200
18
Please complete the form and mail or fax it to Business & Service. You will receive a written conrmation for your hotel booking. Please contact Business & Service directly in case you need any further information After we have received the congress registration, delegates will be sent a written conrmation of par- about hotel facilities: ticipation and invoice in return, followed by more Business & Service details in due time. Congress materials (incl. name Tel.: +49 911 86076-0 badge, congress proceedings as CD Rom, etc.) will Fax: +49 911 86076-11 be ready for collection upon arrival at the congress info@business-und-service.de registration desk (entrance CCN Ost) in Nuremberg. www.business-und-service.de Registration desks will be open on each day of the Visa Information Congress, from 8.00 H. After 21 April 2007 delegates are asked to register International attendees who will need to obtain a on-site in Nuremberg. Please note that on-site reg- visa for visiting Germany should contact the German istrations cannot be guaranteed as congress places embassy or consulate in order to determine how to apply and the length of time required to process are limited. applications. The organiser has no inuence over Fees include: the issuance of visas. In order to obtain a letter of Admittance to the Congress Day booked invitation from the organiser, please contact the NrnbergMesse: Congress Proceedings as CD-Rom
List of Congress Delegates of the Congress Day booked Permanent Exhibition Ticket Exhibition Catalogue Luncheons & Coffee Breaks After Work Party
NrnbergMesse GmbH Visitor Information Tel: +49 911 8606-4900 Fax: +49 911 8606-4901 visitorinformation@nuernbergmesse.de Notice Photographs of attendees will be taken during the events and may be used for promotional purpose. The address data are processed for customer service and information purposes in compliance with the German Data Protection Law. Companys name, city and country might be published on the Internet as reference for upcoming events. Photographs The photographs published in this brochure have been kindly provided: Vincentz Network
A CD Rom with all presentations of the congress day booked will be included in the congress fee. Sales Tax Refund Procedure Within 6 month after the calendar year expires the claim for the sales tax refund must be made at the German Federal Ofce of Finance: Bundesamt fr Finanzen, Friedhofstr. 1, 53225 Bonn, DE
19
Eyes open!
Which new technological developments are promising? What will REACH change? Where are new trends emerging? The EUROPEAN COATINGS SHOW is a dynamic driving force, reliable trend-setter and top get-together. Keep an eye on the market and focus on the future!
www.european-coatings-show.com