Documente Academic
Documente Profesional
Documente Cultură
Odour Control
www.anotec.com.au
www.anotec.com.au
General Information
DESCRIPTION
The chemical constituents of Anotec® 0307 are highly
active organic compounds that include but are not Neither slight branching nor increments in the length
limited to sugar derivatives and peptides. Anotec’s of the carbon chain appear to exert a significant
unique blend of compounds forms complexes that effect on the rate of degradation. Run-off can be
effectively absorb and treat offending odour disposed of via normal wastewater channels. The
molecules. Further, the Anotec® 0307 blend, when proprietary additives for binding, enhancing
applied, reduces the surface tension in the liquid biodegradation and odour profiling – each of which is
phase and assists in the blocking or inhibition of >2% - are all food grade quality. The active
volatisation of malodours. The effectiveness of ingredients in this product have boiling points in
Anotec® 0307 Odour Control formulations stems from >1500C. Anotec® 0307 is fully miscible in water and
the unique chemistry of synergised surfactants ad the product does not have a measurable flash point.
odour profiling technology, enabling efficient and Application via a misting or fogging system ensures
immediate reduction in chemical odour direct contact between the Anotec odour control
concentrations when compared to conventional odour formulation and the malodorous emission. Upon
abatement technologies. The non-ionic surfactants in direct contact, odour analysis shows a significant
the product are readily biodegradable in standard reduction in chemical odour concentrations for each
component identified in any malodorous mix.*
BOD tests and CO2 evolution procedures.
TYPICAL PROPERTIES
Test Unit Result
3
All rights reserved by Anotec Pty Limited
Tel: (02) 9700 1222 | Fax: (02) 9700 1771 | Email: service@anotec.com.au
5
All rights reserved by Anotec Pty Limited
Tel: (02) 9700 1222 | Fax: (02) 9700 1771 | Email: service@anotec.com.au
Application Equipment
6
All rights reserved by Anotec Pty Limited
Tel: (02) 9700 1222 | Fax: (02) 9700 1771 | Email: service@anotec.com.au