Sunteți pe pagina 1din 7

NATIONAL WASTE REPORT 2010 SURVEY IMPORTANT INFORMATION

This survey must be completed by a relevant and competent person within your organisation. This person should have detailed knowledge of onsite activities and processes during the reporting year in question. All quantities must be reported as tonnes or number of pallets only. Please contact the NATIONAL WASTE REPORT HELPLINE on (01) 405 3788 if you require any further help on completing this survey. The helpline will be available from 1 February 2011. Please submit the completed return to recyclers@wastesurvey.ie or by post to National Waste Report, Resource Use Unit, EPA, PO Box 3000, Johnstown Castle Estate, Co. Wexford by 11 March 2011.

COMPLETING THE SURVEY


PART 1 - COMPANY INFO Please ensure all sections of this worksheet are completed. Use the free text box in Section 14 to include any commentary or explanations on the data. This may minimise the extent of validation and follow-up required on the submitted data. Q10 - Does your company broker waste? Does your company collect or arrange collection of waste from a customer and send it (i) directly to landfill (ii) directly abroad or (iii) directly to an Irish facility other than one of your own facilities? If you answer yes to any of these questions please provide information in the free-text box provided. PART 2 - WASTES HANDLED IN 2010 Please ensure you complete all sections of this worksheet. Please distinguish waste accepted from the Republic of Ireland and waste accepted from abroad. Make sure to include all waste accepted at your facility, whether or not they were pallets, and whether or not they were collected by your company. Please provide offsite destination details for Questions 6 and 8. Note that for pallets the tonnage (or number of pallets) reported as the sum of 1 + 2 should equal the sum of 3+4+5+6+7. This is a useful mass balance check.

DISPOSAL AND RECOVERY CODES


In order to select the R code which fits the recovery operation carried out on your premises, please refer to the document "Explanation of Recovery and Disposal Codes " which is available to download from www.wastesurvey.ie. This document gives useful examples of the types of operations that fall under each of the R and D codes.

NATIONAL WASTE REPORT 2010 SURVEY PART ONE - GENERAL COMPANY INFORMATION
**PLEASE COMPLETE ALL SECTIONS**
1 Year to which Data Applies: 2 Company Name: 3 Trade Names 4 Facility Address(es) Address 1: Address 2: Address 3: Address 4: 5 Addresses for correspondence if different to above:

Calendar Year 2010

6 Contact Name: 7 Postion held within company: 8 Telephone Numbers (Landline and Mobile): 9 E-mail:

10 Does your company broker waste i.e. does your company arrange collection of waste from a customer and send it (i) directly to a landfill (ii) directly abroad or (iii) directly to an Irish facility other than one of your own facilities.

PLEASE SELECT

If YES, please supply details:

11 EPA Waste Licence Number/ Local Authority Waste Permit Number/ Certificate of Registration Numbers

12 Does your company claim from Repak? PLEASE SELECT

If YES, please state the waste stream(s) your company claims for:

13 Please provide a brief description of activities that are carried out onsite including the types of wastes accepted onsite:

Include a description of the onsite pallet operations, but remember to include details of any other w activites onsite.

14 Additional Information - Please give any additional information which may be useful to us in compiling annual statistics on waste recycling. Please also include any comments in relation to improving this reporting form

15 How many minutes did it take you to fill in this survey? 16 Finally, please confirm that you have read the 'Important Info' sheet:

PLEASE SELECT

E REPORT 2010 SURVEY L COMPANY INFORMATION


Calendar Year 2010

PLETE ALL SECTIONS**

Please enter the name of the person who will answer any queries about the information submitted.

allet operations, but remember to include details of any other waste

NATIONAL WASTE REPORT 2010 SURVEY


Enter data/information in white cells only. Please answer each of the following questions. Provide the tonnage of pallets or the number of pallets where tonnage is unavailable. 1 Tonnage of pallets accepted onsite in 2010.
Make sure to include all pallets accepted at your facility, whether or not they were collected by your company. 15 01 03

Quantity accepted from ROI EWC Code

Quantity accepted from abroad FULL name & address of offsite facility to which waste was sent Recovery / Diposal operation to which waste was subjected

Number of Tonnage Number of Tonnage Pallets of Pallets Pallets of Pallets

Description of process

2 Tonnage of pallets in storage onsite at the start of


2010. 15 01 03

3 Tonnage of pallets accepted onsite in 2010 and


immediately sold (i.e. no repair done in order to make them suitable for selling). 15 01 03

4 Tonnage of pallets repaired onsite for re-sale in 2010.


15 01 03

5 Tonnage of pallets recovered onsite in 2010.


<<Example 1>> Wood is shredded for use in landscaping 15 01 03 <<Example 2>> Wood is used as a fuel in the on-site biomass boiler R1 - Use as a fuel R3 - Organic Substance Recycling

6 Tonnage of pallets recovered or disposed at a third


party facility in 2010. <<Example 1>> Chipboard Company, Address 123. Licence No. XXX 15 01 03 <<Example 2>> Wood Burner Co., Wood <<Example 2>> Wood is used as a fuel in Road, Ennis, Co. Clare. Permit No. XXX the on-site biomass boiler R1 - Use as a fuel <<Example 1>> Chipboard manufacture R3 - Organic Substance Recycling

7 Tonnage of pallets in storage onsite at the end of


2010. 15 01 03

8 Please detail any other waste streams accepted onsite, or removed offsite in 2010 below:
<<Example 1>> Steel nails, steel banding from pallets <<Insert waste description here>> <<Insert waste description here>> <<Insert waste description here>> 19 12 02 SELECT SELECT SELECT Metal handler, Permit No. XX <<Insert Facility Name & Address Here>> <<Insert Facility Name & Address Here>> <<Insert Facility Name & Address Here>> Metal recovery R4 - Metal recovery SELECT SELECT SELECT

<<Insert waste description here>> <<Insert waste description here>> <<Insert waste description here>>

SELECT SELECT SELECT

<<Insert Facility Name & Address Here>> <<Insert Facility Name & Address Here>> <<Insert Facility Name & Address Here>>

SELECT SELECT SELECT

S-ar putea să vă placă și