Documente Academic
Documente Profesional
Documente Cultură
1 General........................................................................................................2
1.1 Introduction..................................................................................2
1.2 CP Backup...................................................................................2
1.3 Transfer to TAPE (DAT )..............................................................2
1.4 Frequency....................................................................................4
1.5 Rotate and update backup files...................................................4
2 APG 40 Windows 2003 ..............................................................................5
2.1 AP Backup...................................................................................5
2.2 Transfer to TAPE (DAT)...............................................................5
2.3 Frequency....................................................................................7
General
1.1
Introduction
The purpose of this document is to provide the guideline for backup
procedures in Core Ericsson nodes.
1.2
CP Backup
1 Connect to CP mode.
mml
2 Check backup information.
SYBFP:FILE;
3 - Passivate the automatic output of the small and large data dumps.
SYBUE;
4 - Initiate the output of a system backup copy .
SYBUP:FILE;
5 Wait till following printout.
6 - Connect to AP mode.
aploc;
7 Check the APG node you are connected.
hostname
8 - Check to make sure you are connected to the active node.
prcstate
9 - Insert Tape DAT in active node.
1.3
8 Start Backup
1.4
Frequency
The CP Backup to DAT is recommended to be taken on weekly basis.
1.5
2.1
AP Backup
1 telnet to the node and then Connect to AP mode.
aploc;
2 Initiate backup of the APG40 system disks.
burbackup -o
3 Wait till Backup execution completed then Check backup
M:\Images\NodeA and M:\Images\NodeB
dir
2.2
8 Start Backup.
2.3
Frequency
The APG Backup to DAT is recommended to be taken in every 15 days.