Sunteți pe pagina 1din 1

Protection, Substation Automation, Power Quality and Measurement

6.3 Substation Automation

database with the settings into the new tool SICAM PAS UI. This method reduces the refurbishment work signicantly and adds new features to the system: In the next years the substation can be expanded with new feeder devices through the use of IEC 61850, even though some parts of the system might already be older than 15 years (g. 6.3-10). Our solutions are not only compatible with older devices, they are also very innovative. The Frost&Sullivan Technology Leadership Award 2006 was presented to Siemens for pioneering in the development of an innovative technology, the IEC 61850. With Siemens energy automation solutions, every user is on the safe side: The combination of long-term experience and the newest innovation supplies safety for many years to come.

6.3.3 SICAM PAS


SICAM PAS (Power Automation System) meets all the demands placed on a distributed substation control system both now and in the future. Amongst many other standardized communication protocols, SICAM PAS particularly supports the IEC 61850 standard for communication between substations and IEDs. SICAM PAS is an open system and in addition to standardized data transfer processes it features user interfaces for the integration of system-specic tasks and offers multiple automation options. SICAM PAS can thus be easily included in existing systems and used for system integration, too. With modern diagnostics, it optimally supports commissioning and maintenance. SICAM PAS is clearly structured and reliable, thanks to its open, fully documented and tested system (g. 6.3-11).

System overview, application and functionality of SICAM PAS SICAM PAS is an energy automation solution; its system architecture makes it scalable. SICAM PAS is suitable for operating a substation not only from one single station level computer, but also in combination with further SICAM PAS or other station control units. Communication in this network is based on a powerful Ethernet LAN. With its features and its modular expandability, SICAM PAS covers a broad range of applications and supports distributed system congurations. A distributed SICAM PAS system operates simultaneously on several computers. SICAM PAS can use existing hardware components and communication standards as well as their connections. SICAM PAS controls and registers the process data for all devices of a substation, within the scope of the data transfer protocols supported. SICAM PAS is a communication gateway. This is why only one single data connection to a higher-level system control center is required. SICAM PAS enables integration of a fully graphical process visualization system directly in the substation. SICAM PAS simplies installation and parameterization of new devices, thanks to its intuitive user interface. SICAM PAS is notable for its online parameter setting features, particularly when the system has to be expanded. There are no generation times; loading into a target system is not required at all or only required if conguration is performed on a separate engineering PC. SICAM PAS features integrated testing and diagnostic functions. Its user-friendliness, its operator control logic, its orientation to the Windows world and its open structure ideally suit users' requirements. SICAM PAS is developed in accordance with selected security standards and meets modern demands placed on safe communication.

Control center Station unit full server IEC 60870-5-101 DNP V3.0

Corporate network TCP/IP

IEC 60870-5-104 DNPi HMI

Station bus Serial hub

Ethernet TCP/IP

IEC 61850

Fig. 6.3-11: Typical SICAM PAS conguration; IEDs are connected to the station unit with IEC 61850 and various other protocols (IEC 60870-5-103,DNPV3.00, etc.). The station unit communicates with the higher-level system control center by means of IEC 60870-5-101 and / or 104

350

Siemens Energy Sector Power Engineering Guide Edition 7.0

S-ar putea să vă placă și