Documente Academic
Documente Profesional
Documente Cultură
Toggles
Toggles
A Series...........................................A4
0.4VA Logic Level; Process Sealed Straight, Right Angle, & Vertical PC PCB Mount
Rockers
Pushbuttons
B Series .........................................A12
Antistatic; Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC PCB Mount
Programmable Illuminated PB
Keylocks
D2 Series.......................................A24
0.4VA Logic Level Straight, Right Angle, & Vertical PC PCB Mount
Rotaries
Slides
G Series ........................................A34
Ultra-Miniature; Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC PCB Mount
Tactiles
G3T Series.....................................A42
Ultra-Miniature; Process Sealed SMT 0.4VA Logic Level Gull-wing Terminals Upright & Right Angle Mount
Accessories
Indicators
M Series ........................................A48
Bushing Mount 6A Power Level & 0.4VA Logic Level Solder Lug, Quick Connect, Straight PC, & Wirewrap
A2 www.nkk.com
Supplement
Toggles
Contents
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
M Series ........................................A60
Straight PC with Bracket 6A Power Level & 0.4VA Logic Level PCB Mount
M Series ........................................A66
Right Angle & Vertical PC 6A Power Level & 0.4VA Logic Level PCB Mount
P Series .........................................A90
Internationally Approved 10A Power Level Solder Lug, Straight PC, & Quick Connect Bushing Mount
S Series .........................................A94
5A to 50A Low, Medium, & High Capacity Solder Lug, Quick Connect, & Screw Lug Bushing Mount
WT Series....................................A124
Environmentally Sealed 10A Power Level Solder Lug, Screw Lug, & Wire Lead Bushing Mount
www.nkk.com
A3
Series A
Toggles
Rockers
General Specifications
Electrical Capacity (Resistive Load)
Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section.
Pushbuttons
Programmable Illuminated PB
Other Ratings
Keylocks
50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum between contacts for 1 minute minimum; 500V AC minimum between contacts & case for 1 minute minimum 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 50,000 operations minimum 1.47N (momentary); 1.18N (maintained) for .394 (10.0mm) toggles 2.73N (momentary); 1.84N (maintained) for all other toggles Nonshorting (break-before-make) 26
Rotaries
Toggle: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals:
Glass fiber reinforced polyamide for antistatic; nickel plated brass for all others Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Brass with gold plating Brass with gold plating
Tactiles
Slides
Environmental Data
30C through +85C (22F through +185F) 90 ~ 95% humidity for 240 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Tilt
Touch
PCB Processing
Soldering: Cleaning:
Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. See Cleaning Specifications in Supplement section.
Indicators
Supplement
Accessories
The A Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.
A4
www.nkk.com
Series A
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement contents.) Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants. .100 x .100 (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Toggle option in antistatic material available for dissipating electrostatic discharges. Matching indicators available.
Actual Size
www.nkk.com
A5
Series A
Toggles
Rockers
Programmable Illuminated PB
Pushbuttons
Poles
1 2 SPST SPDT DPDT SP3T A J J2 E H K
Toggles
.394 (10.0mm) Bat .248 (6.3mm) Bat .248 (6.3mm) Antistatic Bat .394 (10.0mm) Flatted .248 (6.3mm) Flatted Snap Top for A or B Paddle A B G J
Optional Caps
.394 (10.0mm) Bat Lever Cap .248 (6.3mm) Bat Lever Cap
Paddles
Short Paddle for K Toggle Long Paddle for K Toggle
Keylocks
Circuits
1 2 3 5 R 8 9 S OFF ON ON ON (ON) (ON) ON (ON) ON (ON) ON NONE NONE OFF NONE NONE OFF OFF OFF ON ON ON ON ON ON (ON) ON (ON) (ON) ON ON (ON) (ON) P B B1 H V V1
Rotaries
PC Terminals
Straight Straight with Bracket Straight with Inline Bracket (Single Pole only) Right Angle with Bracket Vertical with Bracket Vertical with Inline Bracket (Single Pole only)
Cap Colors
A B C --------Black White Red Yellow Green Blue Gray
Paddle Colors
A B C E F G H
Tactiles
Slides
*4 *6 *7
( ) = Momentary
Tilt
* 3-ON circuits
Touch
A12JV
Accessories
Vertical PC Terminals
Supplement
A6
www.nkk.com
Series A
A
Throw & Schematics Note: Terminal numbers are not actually on the switch.
INTERNAL CONNECTION
Connected Terminals Up
Slot
Center
Down
Center
Down
NONE NONE OFF NONE NONE OFF OFF OFF NONE OFF NONE NONE OFF OFF OFF
OPEN
OPEN
3-1
SPST
SP
2-3
OPEN
2-1
SPDT
3
2 (COM) 1
DP
2-3 5-6
OPEN
2-1 5-4
DPDT
2 3
(COM) 1 6
5 4
For 3 Throw (3-on) Connected Terminals & Schematics Pole SP Model A24 A26 A27 Up ON (ON) ON
External Connection 2 (in) 5
Center ON ON ON
External Connection 2 (in) 5
(out)
(out)
1 2 3 4 5 6
1 (out)
3 4 (out) 6 (out)
1 (out)
3 4 (out) 6 (out)
1 (out)
3 4 (out) 6 (out)
2-3 5-6
2-3 5-4
2-1 5-4
Common (in)
(out)
Material & Finish for J2: Matte finish black glass fiber reinforced polyamide .248 (6.3mm) Antistatic Bat
26 (6.3) .248
Dissipating 20Kv ESD: Straight PC Dissipating 10Kv ESD: Straight PC with Bracket, Right Angle, & Vertical
www.nkk.com
A7
Supplement
(1.6) .063
Accessories
Indicators
Touch
J2
Tilt
TOGGLES
Tactiles
External Conn
Slides
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Series A
Toggles
A
P B
Use of a support bracket is recommended to increase PCB mounting strength and stability.
Rockers
Straight
B1
Pushbuttons
(2.54) Typ .100 (0.6) Dia Typ .024 (0.7) Typ .028
Programmable Illuminated PB
(9.0) .354
(8.8) .346
(9.0) .354
(8.8) .346
(9.0) .354
(5.08) .200
V1
Keylocks
(2.54) Typ .100 (0.6) Dia Typ .024 (2.54) Typ .100 (5.08) .200 (0.3) .012
(5.08) .200
(0.6) Dia Typ .024 (0.5) Typ .020 (2.54) Typ .100 (5.08) .200 (0.3) .012
(5.08) .200 (0.3) .012 (0.7) .028 (0.5) .020 (8.8) .346 (9.0) .354
Rotaries
C L
Slides
Tactiles
Touch
Tilt
(11.0) .433
(10.0) .394
(4.4) .173
Indicators
Accessories
(10.3) .406
(14.2) .559
Supplement
Black
White
Red
Yellow
Green
Blue
Gray
A8
www.nkk.com
Series A
A
Straight PC
Rockers
(1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031
2 3
3
26
(4.5) .177
A12AP
Double Pole
Straight PC
4 5 6
1 2 3
26
2 3
(9.8) .386
5 6
(0.4) .016
A22AP
Slides Supplement Accessories Indicators Touch Tilt Tactiles
(5.0) .197 (6.0) .236 Slot (5.84) .230
(2.6) Dia .102 (0.3) Typ .012
Single Pole
(0.6) Dia Typ .024 (10.16) .400 (4.5) .177 (10.0) .394 (0.5) .020 (13.1) .516 (2.54) Typ .100 (3.1) .122
1 2 3
Straight PC Bracket
(1.0) .039
1
(1.0) .039
1 2 3
26
2 3
(0.3) .012
C L
C L
B Terminals
B1 Terminals
A12AB
Double Pole
Straight PC Bracket
26
A22AB www.nkk.com A9
Rotaries
Keylocks
(5.08) .200
Programmable Illuminated PB
C L
C L
Pushbuttons
(9.8) .386
Toggles
Series A
Toggles
A
Right Angle PC
Single Pole
26
Rockers
Pushbuttons
(0.3) .012
Slot
(6.18) .243
Programmable Illuminated PB
(0.7) .028 (9.8) .386 (10.0) .394 (4.5) .177 (9.38) .369
A12AH
Right Angle PC
(6.0) .236 (5.0) .197 (0.4) .016 (2.6) Dia .102
Double Pole
Slot (0.8) .031
3 2 5 1 4
Keylocks
(5.2) .205 (3.5) .138 (0.7) .028 (5.08) .200 (16.4) .646 (2.54) .100 (3.1) .122 (0.5) .020
(10.0) .394
1 4
2 5
Rotaries
(9.8) .386
(10.0) .394
A22AH
Slides
Vertical PC
(5.0) .197 (0.4) .016 (2.6) Dia .102
Single Pole
(0.8) .031
1
1
Tactiles
1 2 3
(6.0) .236 Slot (0.3) Typ .012 (2.54) .100 (5.84) .230
26
(5.3) .208 (2.54) .100 (2.54) .100 (10.0) .394 (4.5) .177 (14.46) .569 (0.5) .020 (1.0) (3.1) .039 .122 (2.54) Typ .100
2 3
(10.2) .402
2 3
Tilt
C L
C .031 L
Touch
A12AV
V Terminals
V1 Terminals
Vertical PC
Indicators
(5.0) .197 (6.0) .236 Slot (0.3) Typ .012 (5.08) .200 (0.4) Typ .016
Double Pole
(2.6) Dia .102 26 (0.8) .031
1 4 5 6
4 1 2 3
(5.3) .208 (3.5) .138 (0.5) .020 (1.0) .039 (2.54) Typ .100
2 3
(10.2) .402
5 6
Accessories
Supplement
(9.5) .374
(10.0) .394
(3.1) .122
(0.8) Dia Typ .031 (0.6) Dia Typ .024 (5.08) .200
Series B
Toggles
General Specifications
Electrical Capacity (Resistive Load)
Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section.
Pushbuttons
Rockers
Other Ratings
Programmable Illuminated PB
Keylocks
50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 50,000 operations minimum for locking lever models 50,000 operations minimum Toggles A, A1, E & K with Long Paddle: 1.47N (momentary); 1.18N (maintained) Toggles J & H & K with Short Paddle: 2.72N (momentary); 1.84N (maintained) Toggle L: 0.59N Nonshorting (break-before-make) 26
Toggle: Bushing: Gasket: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals:
Nickel plated brass Carbon blended polyamide; nickel plated zinc alloy for locking levers & threaded bushing Nitrile butadiene rubber Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Copper alloy with gold plating Copper alloy with gold plating
Tactiles
Slides
Environmental Data
30C through +85C (22F through +185F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Tilt
Touch
Installation
Mounting Torque:
.30 ~ .45Nm (2.65 ~ 3.98 lb in) for A1 actuator with threaded bushing only
PCB Processing
Indicators
Soldering: Cleaning:
Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section.
Accessories
Supplement
UL94V-0 available The B Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.
A12
www.nkk.com
Series B
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and the support bracket, prevents static discharge to the contacts. Static electricity from an operators touch travels from actuator through the bushing and bracket to the PC board. Locking lever mechanism offered as a toggle option. Optional threaded, 6mm diameter bushing for panel seal mounting meets IP65 of IEC60529 specifications (similar to NEMA 4 and 13). Totally sealed body construction prevents contact contamination and allows timeand money-saving soldering and cleaning. Epoxy sealed terminals lock out flux and other contaminants. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) .100 x .100 (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing.
Actual Size
www.nkk.com
A13
Series B
Toggles
Pushbuttons
Rockers
B
Poles
1 2 SPDT DPDT
2
Toggles
A A1 J E H L .394 (10.0mm) Bat
B
Optional Caps
G J .394 (10.0mm) Bat Lever Cap .248 (6.3mm) Bat Lever Cap
Programmable Illuminated PB
.315 (8.0mm) Bat with Panel Seal Threaded Bushing (Straight PC only) .248 (6.3mm) Bat .394 (10.0mm) Flatted .248 (6.3mm) Flatted Locking Lever (with Circuits 2 & 3 only)
Keylocks
Circuits
2 3 5 *R 8 9 *S ON ON ON (ON) (ON) ON (ON) NONE OFF NONE NONE OFF OFF OFF ON ON (ON) ON (ON) (ON) ON P *B *H *V
PC Terminals
Straight Straight with Bracket Right Angle with Bracket Vertical with Bracket
Cap Colors
A B C --------Black White Red Yellow Green Blue Gray
Paddle Colors
A B C E F G H
Rotaries
Slides
Tactiles
( ) = Momentary * Reverse circuits R & S available with right angle & vertical only
Tilt
Touch
B12AB
.394 (10.0mm) Bat Toggle
Accessories
Indicators
Supplement
A14
www.nkk.com
Series B
A
Throw & Schematics Note: Terminal numbers are not actually on the switch.
Rockers Toggles Supplement Accessories Indicators
(4.5) Dia .177 (5.1) Dia .201 (11.5) .453 (5.8) .228
Center
Down
2 (COM)
SP
2-3
OPEN
2-1
SPDT
TOGGLES
Standard Material & Finish: Brass with Bright Nickel .394 (10.0mm) Bat .315 (8.0mm) Bat with Panel Seal Threaded Bushing .248 (6.3mm) Bat
A1
26
Locking Lever
26
26 (1.6) .063 (10.0) .394 (2.7) .106 (6.3) .248 26 (1.6) .063 (2.6) .102 (12.5) .492
(5.9) .232
www.nkk.com
A15
Touch
Tilt
Tactiles
Slides
Rotaries
Keylocks
DP
2-3 5-6
OPEN
2-1 5-4
DPDT
(COM)
Programmable Illuminated PB
Pushbuttons
Series B
Toggles
A
P
Use of a support bracket is recommended to increase PCB mounting strength and stability.
Rockers
Straight
(2.54) Typ .100 (5.08) .200
Pushbuttons
Programmable Illuminated PB
Rotaries
Keylocks
OPTIONAL CAPS G
AT4003 .394 (10.0mm) Bat Lever Cap
26
Slides
Tactiles
26
(11.0) .433
(10.0) .394
Tilt
Color Codes:
Touch
Black
White
Red
Yellow
Green
Blue
Gray
Supplement
Accessories
Indicators
A16
www.nkk.com
Series B
A
Straight PC
(1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031
(8.8) .346
2 3
(1.0) .039 C L
C L
Double Pole
(6.0) Dia .236 26 Slot (8.8) .346 (2.6) Dia .102 (0.6) Dia Typ .024
1 2 3 4 5 6
4 1 2 3
Straight PC
(5.08) .200
(8.8) .346
5 6
(5.08) .200
B22AP
(1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) .100
26 Slot
C L
C L
B12AB
(6.0) Dia .236
(2.6) Dia .102 (0.4) Typ .016
Double Pole
(0.6) Dia Typ .024 (10.16) .400
1 2 3 4 5 6
(5.08) .200 (8.8) .346
4 5 6 1 2 3
Straight PC Bracket
Tilt
26 Slot
B22AB
Single Pole
(6.0) Dia .236 (2.6) Dia .102 (3.4) .134
3 2 1
Right Angle PC
(7.3) .287 (0.6) Dia Typ .024 (2.54) Typ .100 (2.54) Typ .100 (5.08) .200 (0.8) Dia Typ .031
Slot (0.6) Typ .024 (5.08) .200 (2.7) .106 (10.0) .394
Supplement
(8.8) .346
Accessories
Indicators
Touch
Tactiles
Slides
(8.8) .346
2 3
Rotaries
Single Pole
Straight PC Bracket
Keylocks
Programmable Illuminated PB
B12AP
Pushbuttons
Rockers
Toggles
Series B
Toggles
A
Right Angle PC
(6.0) Dia .236
Double Pole
(2.6) Dia .102 (3.1) .122 Slot (0.4) .016 (16.4) .646 (2.54) .100 (5.08) .200 (4.4) .173 (0.5) .020
3 6 2 5 1 4
Rockers
(8.8) .346
1 4
2 5
Pushbuttons
(5.08) .200 (0.6) Dia Typ .024 (2.54) Typ .100 (0.8) Dia Typ .031
(8.8) .346
B22AH
Programmable Illuminated PB
Vertical PC
(6.0) Dia .236 26 Slot (0.6) Typ .024 (2.54) .100 (2.7) .106 (2.6) Dia .102
Single Pole
(1.0) .039
1
1
(4.4) .173
2 3
(8.8) .346
2 3
Keylocks
(8.0) .315
(10.0) .394
(18.9) .746
B12AV
Vertical PC
Rotaries
(6.0) Dia .236 26 Slot (2.7) .106 (2.6) Dia .102
Double Pole
1 4 5 6
4 1 2 3
(4.4) .173
2 3
(8.8) .346
5 6
(8.8) .346
(10.0) .394
(18.9) .746
Slides
B22AV
Tactiles
Single Pole
(0.4) Typ .016 (0.6) Dia Typ .024 (10.16) .400 (5.8) .228 (11.5) .453 (12.5) .492
1 2 3
(1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) .100
Tilt
26 Slot
(8.8) .346
2 3
Touch
(5.5) .217
(8.0) .315
C L
C L
B12LB
Indicators
Double Pole
(0.4) Typ .016 (0.6) Dia Typ .024 (10.16) .400 (5.8) .228 (11.5) .453 (12.5) .492
1 2 3 4 5 6
4 1 2 3
Accessories
26 Slot
Supplement
(5.5) .217
Series B
A
Threaded Bushing Straight PC
Rockers
1
1
M6 P0.75
B12A1P
(2.6) Dia .102 26 Slot
M6 P0.75
1 2 3
(5.08) .200
5 6
B22A1P
AT063 Gasket
(6.2) (8.6) .244 .339 (6.0) .236 (5.0) .197
(9.0) .354
(1.5) .059
(1.3) .051
www.nkk.com
A19
Supplement
Accessories
Indicators
Touch
Tilt
Tactiles
Slides
Rotaries
(8.0) .315
(5.5) .217
C L
Keylocks
Programmable Illuminated PB
(8.0) .315
(5.5) .217
(1.0) .039 C L
C L
Pushbuttons
(8.8) .346
Toggles
Series B
Toggles
Rockers
General Specifications
Electrical Capacity (Resistive Load)
Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section.
Programmable Illuminated PB
Pushbuttons
Other Ratings
Keylocks
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Angle of Throw:
50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 100,000 operations minimum 50,000 operations minimum 1.18N Nonshorting (break-before-make) 26
Slides
Actuator: Bushing Housing: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals:
Polyamide Polyamide Glass fiber reinforced polyamide Phosphor bronze with tin plating Phosphor bronze with gold plating Brass with tin plating Brass with gold plating
Rotaries
Environmental Data
Tactiles
25C through +55C (13F through +131F) 90 ~ 95% humidity for 240 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 3 right angled directions, with 5 shocks in each direction)
Tilt
PCB Processing
Touch
Soldering: Cleaning:
Indicators
Wave Soldering recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Automated alcohol based cleaning recommended, 5 minutes maximum. Do not use high-purity alcohol (50% alcohol or more) or organic solvent. High alcohol solution can damage clear plastic. See Cleaning specifications in Supplement section.
Supplement
Accessories
The B Series illuminated toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.
A20
www.nkk.com
Series B
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
LED provides maximum illumination to bushing and actuator, indicating actuator status in highly visible green, red, or amber for single color or red/green for bicolor. (Patent pending.) Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Molded-in, epoxy sealed terminals lock out flux and other contaminants. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability, and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) .100 x .100 (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing.
Actual Size
www.nkk.com
A21
Series B
Toggles
Pushbuttons
Rockers
B
Poles
1 SPDT 2
1
Circuits
ON NONE
J
Actuator
P
PC Terminals
P Straight Right Angle Vertical C D F
C
LEDs
Single Color Red Amber Green Bicolor CF Red/Green ON-NONE-ON & ON-OFF-ON
Programmable Illuminated PB
ON
Clear
Combines with single color or bicolor LEDs 3 ON OFF ON Combines with bicolor LED only J
H V
ON-NONE-ON only
Bushing
Clear
Keylocks
B12JJPC
Rotaries
Clear Toggle & Bushing with Red LED SPDT ON-NONE-ON Circuit Straight PC Terminals
Tactiles
Slides
Tilt
Touch
Slot
Indicators
SPDT
B12 B13
ON ON
NONE OFF
ON ON
2-3 2-3
NONE OPEN
2-1 2-1
3
2 (COM) 1
Single Color
Bicolor
Accessories
Clear Bushing
Supplement
A22
www.nkk.com
Series B
A
Bicolor
Colors
Forward Peak Current Typical Forward Current Forward Voltage Reverse Peak Voltage I FM IF VF VRM
0.43mA/C
25C ~ +55C
PC TERMINALS P
Straight
2 3
(8.8) .346
5 6
(5.08) .200
B12JJPC
Right Angle PC
26
1 4
2 5
3 6
Slot (2.7) .106 (6.3) .248 (0.4) .016 (5.08) .200 (16.42) .646 (2.54) .100 (0.5) .020
(5.08) .200 (0.6) Dia Typ .024 (2.54) Typ .100 (0.8) Dia Typ .031
B13JJHCF
(1.9) Dia .075 (6.0) Dia .236 Slot (0.6) Typ .024 (2.7) .106 (6.3) .248 (0.4) .016 (5.08) .200 (18.96) .746 (0.5) Typ .020 (2.54) Typ .100 (5.08) .200
1 4 5 6
Vertical PC
(3.1) .122
2 3
4 5 6
1 2 3
B13JJVCF A23
Supplement
Accessories
26
(8.8) .346
(5.08) .200
Indicators
Touch
Tilt
(3.1) .122
(8.8) .346
(2.54) .100
Tactiles
Slides
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
CF
Toggles
Series D2
Toggles
Rockers
General Specifications
Electrical Capacity (Resistive Load)
Logic Level: 0.4VA maximum @ 48V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 48V) Note: Find additional explanation of operating range in Supplement section.
Pushbuttons
Programmable Illuminated PB
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Contact Timing: Angle of Throw:
50 milliohms maximum 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 100,000 operations minimum for bat lever models 50,000 operations minimum for locking lever models 50,000 operations minimum Nonshorting (break-before-make) 24
Keylocks
Slides
Toggle/Lever: Bushing: Support Bracket: Housing: Base: Movable Contacts: Stationary Contacts: Terminals:
Brass with chrome plating Brass with nickel plating Straight PC: phosphor bronze with tin plating; right angle & vertical: brass with tin plating Polybutylene terephthalate (PBT) (UL94V-0) 1- and 2-pole GFR polyamide (UL94V-0); 4-pole liquid crystal polymer (LCP) (UL94V-0) Phosphor bronze with gold plating Brass with gold plating Brass with gold plating
Rotaries
Environmental Data
Tactiles
10C through +70C (+14F through +158F) 90 ~ 95% humidity for 240 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Tilt
PCB Processing
Soldering:
Cleaning:
Wave Soldering recommended. See Profile A in Supplement section. Manual Soldering: 1- & 2-pole: 3 seconds maximum @ 350C maximum; 4-pole: 4 seconds maximum @ 410C maximum Hand clean locally using alcohol based solution. See Cleaning specifications in Supplement section.
Indicators
Touch
Supplement
Accessories
UL94V-0 rated housing & base The D2 Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-current, logic level circuit. When used as intended in a logic level circuit, the results do not produce hazardous energy.
A24
www.nkk.com
Series D2
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Base of heat resistant resin meets UL94V-0 flammability rating. Maximized voltage capability of 48V allows use in medium source applications and increases operating life.
Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother positive detent actuation, increased contact stability, and unparalleled reliability. (Additional STC details under Terms and Acronyms in the Supplement section.)
Actual Size
www.nkk.com
A25
Series D2
Toggles
Rockers
Programmable Illuminated PB
Pushbuttons
D220
Poles
1 2 *4 SPDT DPDT 4PDT No Code L
Actuators
.413 (10.5mm) Bat Lever .200 (5.1mm) Diameter Locking Lever
* Combines with ON-NONE-ON circuit only & not available with Right Angle
Rotaries
Keylocks
Circuits
2 3 5 8 9 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) P B H V
PC Terminals
Straight Straight with Bracket Right Angle w/Bracket Vertical with Bracket
Slides
Tilt
Tactiles
( ) = Momentary
D22012P
.413 (10.5mm) Bat Lever
Indicators
Accessories
Supplement
A26
www.nkk.com
Series D2
A
Throw & Schematics Note: Terminal numbers are not actually on the switch.
Rockers
4 11 7 12 10 24 (5.1) Dia .201 (4.6) Dia .181
Center
Center
Up
Pole
Model D22012 D22013 D22015 D22018 D22019 D22022 D22023 D22025 D22028 D22029 D22042 ON ON ON (ON) ON ON ON ON (ON) ON ON NONE OFF NONE OFF OFF NONE OFF NONE OFF OFF NONE ON ON (ON) (ON) (ON) ON ON (ON) (ON) (ON) ON
2 (COM)
SP
2-3
OPEN
2-1
SPDT
DP
2-3 5-6
OPEN
2-1 5-4
DPDT
3
(COM) 1 6
4P
OPEN
4PDT
2 3 1 6
(COM) 4 9
ACTUATORS
No Code .413 (10.5mm)
Bat Lever
24
(8.0) .315
M6 P0.75
Straight
AT427 Cap Supplied with Locking Lever Material: Anodized Aluminum Colors Available: ACG E Yellow F Green G Blue
(8.0) .315
Colors Codes:
A Black
B White
C Red
www.nkk.com
A27
Supplement
Accessories
Indicators
Touch
Tilt
Tactiles
PC TERMINALS
Slides
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Toggles
Series D2
Toggles
A
Straight PC Single Pole
Keyway
Rockers
M6 P0.75
3
(0.3) .012
24
(5.08) Typ .200 (0.8) Dia Typ .031 (10.5) .413 (7.2) .283 (13.9) .547 (3.6) .142
2 1
(14.4) .567
Pushbuttons
(7.0) .276
(0.3) .012
Programmable Illuminated PB
Keyway
M6 P0.75
3 2
24
(5.08) Typ .200 (17.9) .705 (19.4) .764 (0.8) Dia Typ .031 (6.1) .240 (13.9) .547 (3.6) .142
D22012P
D22012LP
Keylocks
Keyway
M6 P0.75
24
Rotaries
(5.08) Typ .200 (0.8) Dia Typ .031 (10.5) .413 (7.2) .283 (13.9) .547 (3.6) .142
5 4
(14.4) .567
(0.3) .012
Slides
Keyway
M6 P0.75
24
Tactiles
(5.08) Typ .200 (17.9) .705 (19.4) .764 (0.8) Dia Typ .031 (6.1) .240 (13.9) .547 (3.6) .142
Tilt
D22022P
D22022LP
Keyway
(0.3) .012
24
(5.08) Typ .200 (0.8) Dia Typ .031 (10.5) .413 (7.2) .283 M6 P0.75 (13.9) .547 (3.6) .142 (5.08) Typ .200
11 10
(14.4) .567
Indicators
(0.3) .012
Keyway
Accessories
24
(5.08) Typ .200 (17.9) .705 (19.4) .764 (0.8) Dia Typ .031 (6.1) .240 (13.9) .547 (3.6) .142
Supplement
D22042P A28
D22042LP
Series D2
A
(0.7) Typ .028 (14.4) .567 (16.44) .647 (0.3) .012 (5.08) .200
3 2 1
24
(7.0) .276
24
(15.24) .600 (5.08) Typ .200 (17.9) .705 (19.4) .764 (0.8) Dia Typ .031 (5.7) .224 (14.3) .563 (3.6) .142
2 1
(5.08) Typ .200 (7.62) Typ .300 (1.0) Dia Typ .039
D22012B
D22012LB
Keyway
(0.3) .012
3 2 1
6 5 4
(2.8) Dia .110 (7.0) .276 Keyway (6.8) (10.5) .268 .413 (6.2) Dia .244 (14.3) .563 (3.6) .142
24
(0.8) Dia Typ .031 (5.7) .224 (14.3) .563 (3.6) .142
Keyway
(0.4) Typ .016 (15.24) .600 (5.08) Typ .200 (0.8) Dia Typ .031 (5.08) Typ .200
(5.08) .200
(0.3) .012
6 5 4 3 2 1
24
8 7
(14.4) .567
(10.5) .413
(14.3) .563
(3.6) .142 (0.4) Typ .016 (15.24) .600 (5.08) Typ .200
24
(7.0) .276
(5.7) .224
(14.3) .563
(3.6) .142
D22042B
D22042LB A29
Supplement
Accessories
Indicators
(2.54)Typ .100
(0.3) .012
Touch
Tilt
D22022B
D22022LB
Tactiles
Slides
(0.3) .012
Rotaries
24
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Series D2
Toggles
A
Right Angle PC Single Pole
Keyway (0.3) .012
Rockers
Pushbuttons
Programmable Illuminated PB
(10.5) .413
(7.7) .303
D22012H
Keyway (0.3) .012 (5.1) Dia .201 (3.5) .138 (0.7) Typ .028 (5.08) .200
Keylocks
(15.24) .600 (0.4) .016 (0.9) .035 (15.24) .600 (3.5) .138 (0.8) Dia .031
Rotaries
(6.6) .260
D22012LH
Slides
Tactiles
(0.3) .012 (2.8) Dia .110 (3.5) .138 (0.7) Typ .028 (5.08) .200 (10.5) .413 (7.7) .303 (0.4) .016 (0.9) .035 (15.24) .600 (0.5) (3.5) .020 .138 (0.8) Dia Typ .031 (2.54) .100 (0.3) .012
(12.4) .488
Tilt
Touch
D22022H
Keyway
Indicators
(0.3) .012
(5.1) Dia .201 (0.4) .016 (0.9) .035 (15.24) .600 (0.5) (3.5) .020 .138 (0.8) Dia Typ .031 (2.54) .100
Accessories
(15.24) .600
Supplement
Series D2
A
Vertical PC Single Pole
(0.3) Typ .012
3
Keyway
(5.08) .200
(10.5) .413
(7.7) .303
(7.0) .276
D22012V
Keyway (6.2) Dia .244
3 2
(0.3) .012
24
(3.5) .138 (1.0) .039 (0.4) .016 (0.9) .035 (15.24) .600 (0.5) .020 (0.8) Dia Typ .031 (2.54) Typ .100
D22012LV
Keyway
(0.3) .012
(0.3) .012
24
(3.5) .138 (1.0) .039 (0.4) .016 (0.9) .035 (15.24) .600 (0.5) .020 (0.8) Dia Typ .031 (2.54) Typ .100
5 4
(14.4) .567
(10.5) .413
(7.7) .303
Keyway
(0.3) .012
24
(3.5) .138 (1.0) .039 (0.4) .016 (0.9) .035 (15.24) .600 (0.5) .020 (0.8) Dia Typ .031 (2.54) Typ .100
D22022LV A31
Supplement
Accessories
(15.24) .600
Indicators
Touch
D22022V
Tilt
Tactiles
Slides
Rotaries
Keylocks
(15.24) .600
Programmable Illuminated PB
(1.0) .039
(0.3) .012
Pushbuttons
(0.3) .012
24
(3.5) .138
(14.4) .567
Rockers
Toggles
Series D2
Toggles
A
Vertical PC Four Pole
Keyway
Rockers
(0.3) .012
Pushbuttons
(0.3) .012
24
(3.5) .138 (1.0) .039 (0.4) .016 (0.9) .035 (15.24) .600 (0.5) .020 (0.8) Dia Typ (5.08) Typ .031 .200 (2.54) Typ .100
11 10
(14.4) .567
Programmable Illuminated PB
(10.5) .413
(7.7) .303
D22042V
Keyway (6.2) Dia .244
3 2 6 5 4 9 8 7 12 11 10
(0.3) .012
24
(3.5) .138 (1.0) .039 (0.4) .016 (0.9) .035 (15.24) .600 (0.5) .020 (0.8) Dia Typ .031 (2.54) Typ .100
(15.24) .600
Keylocks
Rotaries
D22042LV
STANDARD HARDWARE
AT513M Hex Nut Brass with nickel plating 2 supplied
M6 P0.75 (8.0) .315
OPTIONAL
AT509 Lockwasher Steel with zinc/chromate 1 supplied AT501M Knurled Face Nut Brass with chrome plating
Tactiles
Slides
M6 P0.75 (6.4) Dia (10.2) Dia .252 .402 (10.0) Dia .394
Tilt
Touch
(9.0) .354
(1.5) .059
(1.7) .067
(0.8) .031
(0.5) .020
(1.7) .067
With Standard Hardware .087 (2.2mm) for Standard Lever .051 (1.3mm) for Locking Lever
Without Bottom Hex Nut .154 (3.9mm) for Standard Lever .110 (2.8mm) for Locking Lever
Without Locking Ring .118 (3.0mm) for Standard Lever .083 (2.1mm) for Locking Lever
Without Locking Ring & Bottom Hex Nut .185 (4.7mm) for Standard Lever .142 (3.6mm) for Locking Lever
Accessories
(6.5) .256
Supplement
A32
www.nkk.com
Series G
Toggles
Rockers
General Specifications
Electrical Capacity (Resistive Load)
Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section.
Programmable Illuminated PB
Pushbuttons
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life:
Keylocks
80 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 0.93N for momentary & 1.20N for maintained 28
Actuator: Case: Sealing Rings: Movable Contacts: Stationary Contacts: Base: Terminals: Support Bracket:
Glass fiber reinforced polyamide Glass fiber reinforced polyamide Nitrile butadiene rubber Phosphor bronze with gold plating Phosphor bronze with gold plating Glass fiber reinforced polyamide Phosphor bronze with gold plating Phosphor bronze with tin plating
Tactiles
Slides
Environmental Data
25C through +85C (13F through +185F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Tilt
Touch
PCB Processing
Soldering: Cleaning:
Indicators
Wave Soldering recommended: See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section.
Supplement
Accessories
The G Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.
A34
www.nkk.com
Series G
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Ultra-miniature size allows high density mounting, and extremely light weight of 0.25 gram makes these switches ideal for handheld equipment. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Molded-in, epoxy sealed terminals lock out flux, solvents, and other contaminants. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smooth, positive detent actuation, increased contact stability, and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) .100 x .100 (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Round terminals facilitate easier through-hole mounting on PC boards. Matching indicators available.
Actual Size
www.nkk.com
A35
Series G
Toggles
Pushbuttons
Rockers
G
Poles
1 2 SPDT DPDT
1
Circuits
2 3 5 8 9 ON ON ON (ON) ON NONE OFF NONE OFF OFF
3
ON ON (ON) (ON) (ON) A
A
Actuator
.150 (3.8mm) Column Toggle P H V
H
PC Terminals
Straight Right Angle Vertical
Programmable Illuminated PB
( ) = Momentary
Keylocks
G13AH
SPDT ON-OFF-ON Circuit Right Angle PC Terminals
Rotaries
Slides
Tactiles
Connected Terminals Up
Slot
Throw & Schematics Note: Terminal numbers are not actually on the switch.
Center
Down
Center
Down
SP
Touch
ON ON ON (ON) ON ON ON ON (ON) ON
NONE OFF NONE OFF OFF NONE OFF NONE OFF OFF
Tilt
5-6
OPEN
5-4
SPDT
5 (COM) 4 6
(COM) 6 1
2 3
DP
Indicators
5-6 2-3
OPEN
5-4 2-1
DPDT
Accessories
ACTUATOR A
28 (1.7) Dia .067 (4.0) Dia .157
Supplement
(3.8) .150
A36
www.nkk.com
Series G
A
V
Vertical
(2.54) Typ .100 (0.4) Dia Typ .016 (2.54) Typ .100 (0.5) Typ .020 (4.5) .177 (2.54) Typ .100 (7.0) .276 (4.5) .177
(2.54) .100 4
5 6
Straight PC
(2.54) Typ .100
(2.54) .100
4 5
1 2 3
(2.54) .100
G19AP
28
Slot
(2.6) .102 (0.4) Dia Typ .016 (5.08) .200 (7.8) .307 (3.8) .150 (5.08) .200 (1.6) .063 (10.22) .402 (0.5) .020 (2.54) .100
(2.54) Typ .100 1 (0.4) Dia Typ .016 (2.54) Typ .100
4
2 5
3 6
(2.54) .100
(7.0) .276
G19AH
Vertical PC
5 6
28 (2.6) .102 (1.0) .039 (5.08) .200 (12.76) .502 (0.5) Typ .020 (2.54) Typ .100
2 3
(7.4) .292
(5.08) .200
(5.08) .200
Supplement
(2.54) .100
4 5 6
1 2 3
Accessories
Indicators
(0.4) .016
Touch
Tilt
(5.08) .200
Tactiles
(5.08) .200
Slides
Right Angle PC
Rotaries
Keylocks
28
(7.0) .276
Programmable Illuminated PB
(7.0) .276
(4.5) .177
(7.0) .276
Pushbuttons
(0.5) Typ .020 (0.4) Dia Typ .016 (2.54) Typ .100
Rockers
Right Angle
Toggles
Series G
Toggles
Rockers
General Specifications
Electrical Capacity (Resistive Load)
Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section.
Programmable Illuminated PB
Pushbuttons
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life:
Keylocks
80 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 100,000 operations minimum 100,000 operations minimum 10,000 operations minimum @ 0.1A @ 28V AC/DC 1.30N 28
Actuator: Case: Sealing Rings: Movable Contacts: Stationary Contacts: Base: Power Terminals: Lamp Terminals:
Polyamide Glass fiber reinforced polyamide Nitrile butadiene rubber Phosphor bronze with gold plating Phosphor bronze with gold plating Glass fiber reinforced polyamide Phosphor bronze with gold plating Phosphor bronze with gold plating
Tactiles
Slides
Environmental Data
25C through +55C (13F through +131F) 90 ~ 95% humidity for 240 hours @ 40C (104F) 10 ~ 500Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Tilt
Touch
PCB Processing
Soldering: Cleaning:
Wave Soldering recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section.
Indicators
Supplement
Accessories
The G Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.
A38
www.nkk.com
Series G
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Fully illuminated toggle for highly visible status indication with LED in red, green, or amber for single color and red/green for bicolor. Ultra-miniature size allows high density mounting, and extremely light weight makes these switches ideal for handheld equipment. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Molded-in, epoxy sealed terminals lock out flux, solvents, and other contaminants. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smooth, positive detent actuation, increased contact stability, and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) .100 x .100 (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Round terminals facilitate easier throughhole mounting on PC boards.
Actual Size
www.nkk.com
A39
Series G
Toggles
Rockers
G
Pole
1 SPDT 2
1
Circuits
ON NONE ON
2
Actuator
J Clear
J
P H V
H
PC Terminals
Straight Right Angle Vertical C D F
C
LEDS
Single Color Red Amber Green Bicolor CF Red/Green ON-NONE-ON & ON-OFF-ON
Pushbuttons
Programmable Illuminated PB
Combines with single color or bicolor LEDs 3 ON OFF ON Combines with bicolor LED only SPDT ON-NONE-ON Circuit Clear Toggle, Red LED
ON-NONE-ON only
Keylocks
G12JHC
Rotaries
Connected Terminals Up
Slot
Schematics Note: Terminal numbers are not actually on the switch. LED circuit is isolated and requires an external power source.
2 (COM) 3 1 (4) Red (5) (6) (5) (6) Green
Center
Down
Center
Down
Slides
SPDT
ON ON
NONE OFF
ON ON
2-3 2-3
NONE OPEN
2-1 2-1
Single Color
Bicolor
Tactiles
ACTUATOR J
28
Clear Toggle
(3.8) .150
Tilt
Touch
Indicators
C
Colors Forward Peak Current Typical Forward Current Forward Voltage Reverse Peak Voltage I FM IF VF VRM Red 25mA 20mA 2.0V 4V
D
Amber 25mA 20mA 2.1V 4V
F
Green 25mA 20mA 2.1V 4V 0.33mA/C 25 ~ +55C
CF
Red/Green 25mA/25mA 20mA/20mA 2.0V/2.1V 4V/4V
Accessories
Supplement
A40
www.nkk.com
Series G
A
V
Vertical
(2.54) Typ .100 (0.4) Dia Typ .016
(7.0) .276
(4.5) .177
(7.0) .276
(2.54) .100 (7.0) .276 (0.6) Dia Typ .024 (2.54) .100
4 5 6
1 2 3
28
5 & 6 are LED terminals; 4 is a support pin on single color models & an LED terminal on bicolor models.
G12JPC
Right Angle PC
28
Slot
(2.6) .102 (0.4) Dia Typ .016 (5.08) .200 (7.8) .307 (3.8) .150 (5.08) .200 (1.6) .063 (10.22) .402 (0.5) .020 (2.54) .100
(0.6) Dia Typ .024 (0.4) Dia Typ .016 (2.54) Typ .100
(7.0) .276
Vertical PC
(1.7) Dia .067 (4.0) Dia .157
1 2 3 4 5 6
4 5 6
1 2 3
28 (2.6) .102 (1.0) .039 (5.08) .200 (12.76) .502 (0.5) Typ .020 (2.54) Typ .100
5 & 6 are LED terminals; 4 is a support pin on single color models & an LED terminal on bicolor models.
www.nkk.com
G12JVCF
A41
Supplement
Accessories
Slot
Indicators
(2.54) .100
Touch
5 & 6 are LED terminals; 4 is a support pin on single color models & an LED terminal on bicolor models.
G12JHD
Tilt
Tactiles
Slides
Rotaries
Keylocks
Programmable Illuminated PB
(7.0) .276
(4.5) .177
Pushbuttons
(0.5) Typ .020 (0.4) Dia Typ .016 (2.54) Typ .100
Rockers
Right Angle
Toggles
Series G3T
Toggles
Rockers
General Specifications
Electrical Capacity (Resistive Load)
Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: See Supplement section for explanation of operating range.
Pushbuttons
Programmable Illuminated PB
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Angle of Throw:
80 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 50,000 operations minimum 50,000 operations minimum 1.6N for momentary & 1.7N for maintained 28
Keylocks
Actuator: Case: Sealing Rings: Movable Contacts: Stationary Contacts: Base: Terminals:
Polyphenylene sulfide (UL94V-0) Polyphenylene sulfide (UL94V-0) Nitrile butadiene rubber Phosphor bronze with gold plating Phosphor bronze with gold plating Polyphenylene sulfide (UL94V-0) Phosphor bronze with gold plating
Slides
Rotaries
Environmental Data
Tactiles
30C through +85C (22F through +185F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 500Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Tilt
Installation
Mounting: Coplanarity:
It is recommended that the body of models for upright mounting without bracket be fastened to a panel or similar support for protection of solder joints from mechanical stress. See specifications in Terms & Acronyms in Supplement section
Touch
Processing
Soldering: Cleaning:
Indicators
Reflow Soldering recommended. See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section.
Accessories
Supplement
UL94V-0 actuator, case & base The G3T Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.
A42
www.nkk.com
Series G3T
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Ultra-miniature size allows high density mounting, and extremely light weight of 0.6 gram makes these switches ideal for handheld equipment. Tape-reel and stick-tube packaging allow rapid automated placement of surface mount devices. Tape-reel packaging meets EIA-481-D Standard. Heat resistant resin used for housing, base, and lever allows vapor phase and infrared convection reflow soldering. Combination of design features achieves total seal and allows automated processing techniques, including flux cleaning procedures: one-piece bushing and housing, rubber seals surrounding actuator and base, epoxy at joint of case and base, and molded-in, epoxy-sealed terminals. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Gull-wing terminals provide mechanical stability during soldering and simplified solder joint inspection. Coplanarity: all considered surfaces must lie between two parallel planes that are a maximum distance apart of .0059 (0.15mm). (Additional coplanarity details in Terms and Acronyms in the Supplement section.)
Actual Size
www.nkk.com
A43
Series G3T
Toggles
Pushbuttons
Rockers
G3T
Poles
1 2 SPDT DPDT
2
A
A
Actuator
.150 (3.8mm) Column Toggle
H
Packaging
R Tape-Reel for Right Angle Only 500 Pieces/Reel Stick-Tube for Upright Mount 50 Pieces/Stick Partitioned Tray for Upright & Right Angle Any Quantity Packaging details at end of G3T Series
Programmable Illuminated PB
Circuits
2 3 5 8 9 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) P B H
Terminals
Gull Wing for Upright Mount Gull Wing for Upright with Bracket Mount Gull Wing for Right Angle Mount No Code
Keylocks
( ) = Momentary
Rotaries
G3T12AH
SPDT ON-NONE-ON Circuit .150 (3.8mm) Column Toggle Gull Wing Terminals for Right Angle Mount
Slides
Throw & Schematics Note: Terminal numbers are not actually on switch.
Tilt
Pole
Model G3T12 G3T13 G3T15 G3T18 G3T19 G3T22 G3T23 G3T25 G3T28 G3T29
Slot
Touch
SP
ON ON ON (ON) ON ON ON ON (ON) ON
NONE OFF NONE OFF OFF NONE OFF NONE OFF OFF
5-6
OPEN
5-4
SPDT
4
5 (COM) 6
Indicators
DP
5-6 2-3
OPEN
5-4 2-1
DPDT
4
(COM) 6 1
2 3
Accessories
ACTUATOR A
28
Supplement
A44
www.nkk.com
Series G3T
A
Upright Mounting
Rockers Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons
28
(8.5) .335
2 3
4 5 6
(8.5) .335
Slot
(5.0) .197
(3.8) .150
G3T12AP
28
(11.0) .433
2 3
(11.0) .433
Slot
(5.0) .197
(3.8) .150
(0.5) Typ .020 (0.9) Typ .035 (0.1) .004 (3.8) Typ .150 (2.54) Typ .100 (7.6) .299
G3T22AB
28 (4.0) Dia .157 (0.5) Typ .020 (1.5) .059 (3.8) .150 (0.9) Typ .035 (0.55) .022
(11.0) .433
Single Pole
Double Pole
Slot
(9.0) .354
(5.55) .219
6 3 5 2 4 1
(0.25) .010
(0.1) .004
(0.1) .004
G3T12AH
Upright Mounting
4 5
4 5 6
(5.08) .200
(9.75) .384
(9.75) .384
4 5 6
(6.0) .236
(3.8) .150
4 5
4 5
(9.75) .384
(9.75) .384
(6.0) .236
1 4 2 5 3 6
(6.0) .236
www.nkk.com
A45
Series G3T
Toggles
A
R
Tape-Reel for Right Angle
500 pieces per reel Switches must be ordered in 500-piece increments when tape-reel packaging is selected. This packaging meets EIA-481-D Standard for 16mm and 24mm Embossed Carrier Taping of Surface Mount Components for Automatic Handling.
Programmable Illuminated PB
Pushbuttons
Rockers
Slides
Rotaries
Keylocks
Tactiles
No Code
Supplement
Accessories
Indicators
Touch
Tilt
A46
www.nkk.com
Series G3T
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles
L
Minimum Leader Length: 7.87 (200mm) Minimum Trailer Length: 1.97 (50mm)
(1.75) .069
(0.4) .016
(13.0) Dia .512 (2.0) Typ .079 Overall Dia (330.0) 13.0
(13.9) .547
Reel Dimensions
Tape Dimensions
L = Length G3T Upright (code P) 18.31 (465mm) G3T Upright with Bracket (code B) 21.26 (540mm)
(7.7) .303
(15.3) .602
(9.8) .386
Stick-Tube Dimensions
www.nkk.com
A47
Slides
Rotaries
Keylocks
(2.0) .079
Terminal #1
(24.4) .961
Direction of Feed
Programmable Illuminated PB
(6.0) .236
Pushbuttons
Rockers
Series M
A
Miniature Toggles
General Specifications
Electrical Capacity (Resistive Load)
Power Level (silver): 6A @ 125V AC & 3A @ 250V AC 4A @ 30V DC for On-None-On & On-None-Off; 3A @ 30V DC for all other circuits Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Logic/Power Level (gold over silver): Combines silver & gold ratings Note: Find additional explanation of dual rating & operating range in Supplement section. Contact Resistance: 10 milliohms maximum for silver; 20 milliohms maximum for gold Insulation Resistance: 1,000 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts and case for 1 minute minimum Mechanical Life: 100,000 operations minimum; 50,000 operations minimum for flat, locking & splashproof devices Electrical Life: 25,000 operations minimum for silver; 50,000 operations minimum for gold; 50,000 operations minimum for silver at 3A @ 125V AC Angle of Throw: 25 Toggle: Bushing: Case: Movable Contactor: Movable Contacts: Stationary Contacts: Brass with chrome plating Frame: Stainless steel Brass with nickel plating Support Bracket: Brass with tin plating Diallyl phthalate resin (UL94V0) Phosphor bronze with silver or gold plating Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Silver with silver plating (code W); copper or brass with gold plating (code G); or silver with gold plating (code A) Terminals: Copper or brass with silver plating; or copper or brass with gold plating
Pushbuttons
Rockers
Toggles
Other Ratings
Programmable Illuminated PB
Rotaries
Keylocks
Slides
Environmental Data
Operating Temp Range: 30C through +85C (22F through +185F) Humidity: 90 ~ 95% humidity for 96 hours @ 40C (104F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Sealing: Splashproof bushing options B3, D3, D8, L3, & L8, which have o-rings inside & outside the bushing, meet IP67 of IEC60529 Standards. Mounting Torque: 3.0Nm (26.55 lbin) double nut for large bushing; 1.5Nm (13 lbin) double nut & 0.7Nm (6 lbin) single nut for all other bushings Soldering: Wave Soldering (PC version) for Gold: See Profile A in Supplement section. Manual Soldering for Gold: See Profile A in Supplement section. Wave Soldering (PC version) for Silver: See Profile B in Supplement section. Manual Soldering for Silver: See Profile B in Supplement section. Note: Lever must be in OFF (center) position while soldering. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution.
Tactiles
Installation
Tilt
Processing
Touch Indicators
Supplement
Flammability Standards: UL94V0 for case UL: File No. E44145 - Recognized only when ordered with marking on switch. Add /U or /CUL before dash in part number to order UL recognized switch. All models recognized at 6A @ 125V AC, 3A @ 250V AC or 0.4VA maximum @ 28V DC maximum. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add /C before dash in part number to order CSA certified switch. All models certified at 6A @ 125V AC or 3A @ 250V AC or 0.4VA maximum @ 28V maximum.
Accessories
A48
www.nkk.com
Miniature Toggles
Series M
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Antirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggle has two flatted sides which fit into a complementary opening inside bushing. Antijamming design protects contacts from damage due to excessive downward force on actuator. High torque bushing construction prevents rotation or separation from frame during installation. High insulating barriers increase isolation of circuits in multipole devices and provide added protection to contact points. Molded diallyl phthalate case has a UL flammability rating of 94V-0. Epoxy sealed terminals prevent entry of solder flux and other contaminants. Prominent external insulating barriers increase insulation resistance and dielectric strength. Interlocked actuator block, lever, and interior guide prevent switch failure due to biased lever movement. Clinching of frame to case well above base and terminals provides 1,500V dielectric strength.
Actual Size
Bushing Mount
Page A48
Bracket PC Mount
Page A60
Angle PC Mount
www.nkk.com
Page A66
A49
Series M
Toggles
Rockers
Pushbuttons
Programmable Illuminated PB
1 2 3 4
S S2 S3 E * E2 E4 *Q * Q2 * Q4 *C D
.413 (10.5mm) Bat .200 (5.08mm) Bat .256 (6.5mm) Bat .450 (11.4mm) Flatted .256 (6.5mm) Flatted .840 (21.3mm) Flatted .550 (14.0mm) Cone .640 (16.26mm) Cone .840 (21.3mm) Cone .571 (14.5mm) Color Tipped Cone .840 (21.3mm) Color Capped Cone Specify cap color for toggles C & D at the end of the part number. * Available on 1- and 2-pole only.
S1 S4 S2 A1 A2 D1 D4 D3
.350 (8.9mm) Threaded with Keyway 6mm .350 (8.9mm) Threaded with Keyway .350 (8.9mm) Smooth with Keyway .280 (7.1mm) Threaded with Keyway .280 (7.1mm) Smooth with Keyway .350 (8.9mm) Threaded with D Flat 6mm .350 (8.9mm) Threaded with D Flat .350 (8.9mm) Threaded Splashproof with D Flat (combines only with S, S2 & S3) 6mm .350 (8.9mm) Threaded Splashproof with D Flat (combines only with S, S2 & S3)
W G A
Silver; Rated 6A @ 125V AC & 3A @ 250V AC Gold; Rated 0.4VA max @ 28V AC/DC max Gold over Silver; Rated 6A @ 125V AC & 0.4VA max @ 28V AC/DC max
For Small Bat Toggles B C R V For S Bat Toggle Conical Cap for S Bat Toggle For Large Bat Toggles For B Toggle For B2 Toggle
A B C E F G H
Black White Red Yellow Green Blue Gray (for K1 & K2 paddles)
Keylocks
Cap for Locking Lever No Code A C G Nickel Plated Supplied with Switch Black Red Blue
Rotaries
Terminals
01 02 03 05 Solder Lug* Quick Connect .250 (6.35mm) Straight PC .425 (10.8mm) Wirewrap .750 (19.05mm) Wirewrap 1.062 (27.0mm) Wirewrap .964 (24.5mm) Wirewrap
D8
Slides
*1
2 3 5 8 9
ON ON ON ON (ON) ON ON (ON) ON
Large Toggles
.453 (11.5mm) Large Bat .689 (17.5mm) Large Bat .610 (15.5mm) Large Flatted B1 B3
Large Bushings
Large .472 (12mm) Threaded with Keyway Large .472 (12mm) Threaded Splashproof with D Flat
06 07 08
Tactiles
Tilt
** 6 ** 7
Touch
Locking Lever
.201 (5.1mm) Dia. Locking Lever L1 L4 L2 L3
( ) = Momentary
.291 (7.4mm) Threaded with Keyway for Lever Lock 6mm .291 (7.4mm) Threaded with Keyway for Lever Lock Smooth with Keyway for Lever Lock .295 (7.5mm) Threaded Splashproof with D Flat for Lever Lock 6mm .295 (7.5mm) Threaded Splashproof with D Flat for Lever Lock
Indicators
.413 (10.5mm) Bat Toggle 1/440 .350 (8.9mm) Threaded Bushing with Keyway Silver Contacts with 6Amp Rating SPDT ON-OFF-ON Circuit Solder Lug Terminals
Accessories
IMPORTANT:
Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page.
L8
Supplement
A50
www.nkk.com
www.nkk.com
A51
Supplement
Accessories
Indicators
** 3-ON circuits
Tilt
** 4
Tactiles
Slides
Circuits
Rotaries
Keylocks
Programmable Illuminated PB
Poles
Small Toggles
Small Bushings
Optional Caps
Cap Colors
Pushbuttons
Rockers
M20
S1
01
Toggles
Series M
Toggles
A
( Toggle Position ) = Momentary Center Up Down Pole Model
Keyway
Throw & Schematics Up Note: Terminal numbers are not actually on the switch.
2 (COM)
Pushbuttons
Rockers
Center
SP
M2011 M2012 M2013 M2015 M2018 M2019 M2021 M2022 M2023 M2025 M2028 M2029 M2032 M2033 M2035 M2038 M2039 M2042 M2043 M2045 M2048 M2049
NONE NONE OFF NONE OFF OFF NONE NONE OFF NONE OFF OFF NONE OFF NONE OFF OFF NONE OFF NONE OFF OFF
OFF ON ON (ON) (ON) (ON) OFF ON ON (ON) (ON) (ON) ON ON (ON) (ON) (ON) ON ON (ON) (ON) (ON)
2-3
OPEN
OPEN
SPST
3
Programmable Illuminated PB
SP
2-3
OPEN
2-1
SPDT
3
2 (COM) 1
DP
2-3 5-6
OPEN
OPEN
(COM) 6
DPST
(COM) 1 6
5 4
DP
2-3 5-6
OPEN
2-1 5-4
DPDT
Keylocks
3P
Rotaries
OPEN
5 1 6
(COM) 4 9
8 7
3PDT
Slides
4P
OPEN
4PDT
2 3 1 6
(COM) 4 9
8 7 12
11 10
Center
External Connection 2 (in) 5
Up
External Connection 2 (in) 5
Tilt
SP
Touch
ON (ON) ON
ON ON ON
ON (ON) (ON)
1 (out)
3 4 (out) 6 (out)
1 (out)
3 4 (out) 6 (out)
1 (out)
3 4 (out) 6 (out)
2-3 5-6
External Connection 2 (in) 5 External Connection 8 (in) 11
2-3 5-4
External Connection 2 (in) 5 External Connection 8 (in) 11
2-1 5-4
External Connection 2 (in) 5 External Connection 8 (in) 11
Indicators
DP
ON (ON) ON
ON ON ON
ON (ON) (ON)
3 4 (out) 6 (out) 7 (out) 9 10 (out) 12 (out) 1 (out) 3 4 (out) 6 (out) 7 (out) 9 10 (out) 12 (out)
Accessories
The SP3T model utilizes a double pole base. External connection must be made during field installation.
A52
(out)
3 2 1
Supplement
(out)
(out)
(out)
www.nkk.com
Series M
A
.200 (5.08mm) Bat
Standard Material & Finish: Brass with Bright Chrome Contact factory for optional finishes.
E2
E4
Material: Polycarbonate
(5.0) .197 (2.5) .098 25 25
(4.2) .165
25
(21.3) .840
Q2
Q4
Material: Polyethylene
25 25 (3.1) Dia .122
25
25
(16.26) .640
(21.3) .840
(21.3) .840
Black
White
Red
Yellow
Green
Blue
www.nkk.com
Tilt
Slides
Rotaries
(5.08) .200
25
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
S2
S3
Toggles
Series M
Toggles
A
S1
1/4-40 .350 (8.9mm) Threaded with Keyway
(0.8) .031 1/4-40 Thd
Rockers
S4
S2
Pushbuttons
Programmable Illuminated PB
A1
A2
Keylocks
Rotaries
When using this bushing, toggle length is increased by .070. Maximum Panel Thickness with Standard Hardware: .031 (0.8mm)
When using this bushing, toggle length is increased by .070. 6mm/.350 (8.9mm) Threaded with D Flat
M6 P0.75
D1
D4
D3
Slides
(2.5) .098
Tactiles
D3 combines only with S, S2 & S3 toggles. Maximum Panel Thickness with Standard Hardware: .193 (4.9mm)
D8
Standard Hardware Supplied for Small Bushings Bushing Codes Hex Nut S1/S4 2 1 1 0 A1 2 1 1 0 D1/D4 2 0 1 0 D3/D8 1 0 0 1 L1/L4 2 1 1 0 L3/L8 1 0 0 1
Touch
(2.5) .098
Indicators
Accessories
D8 combines only with S, S2 & S3 toggles. Maximum Panel Thickness with Standard Hardware: .193 (4.9mm) For S1, S2, A1, A2 or S4 Bushing with Keyway & for L1 or L4 Bushing
Supplement
(6.5) .256
(5.8) .228
A54
www.nkk.com
Series M
A
R
.610 (15.5mm) Large Flatted
Toggles Supplement Accessories Indicators
(11.1) .437 (12.5) Dia .492
Toggle & Bushing Combinations: These toggles combine with the 12mm bushings B1 & B3.
B2
25 25 (6.0) Dia .236 (11.5) .453 (17.5) .689 (6.0) Dia .236
(6.15) .242
25 (3.6) .140
(15.5) .610
Standard Material & Finish: Brass with Bright Chrome Optional Finishes: Contact factory for satin chrome or black.
B1
(1.85) .073
(4.9) .193
(10.9) .429
Standard Hardware for B1: 1 hex face nut AT503M, 1 locking ring AT506M, 1 lockwasher AT508, and 1 hex backup nut AT527M Panel Cutouts
(12.5) Dia .492 (12.5) Dia .492
Standard Hardware for B3: 1 hex face nut AT503M and 1 o-ring AT401P
(11.5) .453
www.nkk.com
A55
Touch
Tilt
(12.0) .472
M12 P1
(2.0) .079
Tactiles
(1.1) .043
M12 P1
(12.0) .472
Slides
B3
Rotaries
LARGE BUSHINGS
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Series M
Toggles
A
LL1
1/4-40 .291 (7.4mm) Threaded with Keyway
(8.0) Dia .315 (0.8) .031
Rockers
LL4
LL2
Pushbuttons
(2.5) .098 (5.1) Dia .201 (16.5) (8.0) .650 .315 (15.0) .591 (9.7) .382 (7.4) .291 25 (5.1) Dia .201 (16.5) (8.0) .650 .315 (15.0) .591 (9.7) .382 (7.4) .291 25
(2.5) .098 (5.1) Dia .201 (16.5) .650 (8.0) .315 (15.0) .591 25
(2.5) .098
Programmable Illuminated PB
1/4-40 Thd
M6 P0.75
(0.9) .035
(0.9) .035
Keylocks
Maximum Panel Thickness with Standard Hardware: .047 (1.2mm) Standard Hardware for L1 & L4: 2 hex nuts AT513H or AT513M, 1 locking ring AT507H or AT507M, and 1 lockwasher AT509
LL3
LL8
Rotaries
Slides
25
Tactiles
1/4-40 Thd
M6 P0.75
(1.5) .059
(1.5) .059
Tilt
Maximum Panel Thickness with Standard Hardware: .047 (1.2mm) Standard Hardware for L3 and L8: 1 hex nut AT513H or AT513M and 1 o-ring AT516 Lever Material & Finish: Brass with Chrome Plating
on-none-on on-none-(on) on-off-(on) on-on-(on) on-off-on on-on-on (on)-off-(on) (on)-on-(on)
Touch
Indicators
Locking Mechanism
2 positions lock 1 position locks 2 positions lock 3 positions lock 1 position locks
Accessories
No Code
Supplied with Cap AT427 Cap Material: Brass with Nickel Plating
Lever
Supplement
A
www.nkk.com
Black
Red
Blue
A56
Series M
A
6A @ 125V AC & 3A @ 250V AC 6A @ 125V AC & 3A @ 250V AC
Toggles Supplement Accessories Indicators Touch
(18.0) .709
Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range.
TERMINALS 01
Solder Lug
Epoxy Seal (2.0) .079 (4.0) .157
02
Epoxy Seal
03
3 2 1
6 5 4
6 5 4
9 8 7
3 2 1
6 5 4
9 8 7
12 11 10
Epoxy Seal
2 1
2 1
Single Pole
Double Pole
Three Pole
Four Pole
05 06
08
A
(1.27) .050
(18.5) .728
Black
White
Red
Yellow
Green
Blue
A57
www.nkk.com
Tilt
Dimension A = terminal lengths as shown beside the terminal codes at the left.
Tactiles
07
Epoxy Seal
Slides
Rotaries
(4.8) .189
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Series M
Toggles
A
Solder Lug
Single Pole
Keyway (1.1) x (2.0) Typ .043 x .079 (4.7) Typ .185 (0.8) Typ .031 (0.5) Typ .020 (9.4) .371 (4.5) .177
3 2 1
Rockers
1/4-40 Thd
Pushbuttons
25
(13.0) .512
Programmable Illuminated PB
(2.0) .079
M2012SS1W01
Solder Lug
Double Pole
Keyway
1/4-40 Thd
(1.1) x (2.0) Typ .043 x .079 (4.7) Typ .185 (0.8) Typ .031 (0.5) Typ .020 (9.4) .371 (4.5) .177
6 5 4 3 2 1
Keylocks
25
(13.0) .512
Rotaries
(12.7) .500
(10.5) .413
M2022SS1W01
Slides
Solder Lug
Keyway
Three Pole
(1.1) x (2.0) Typ .043 x .079
9 6 5 4 3 2 1
1/4-40 Thd
Tactiles
(4.7) Typ .185 (0.8) Typ .031 (0.5) Typ .020 (4.5) .177
8 7
(13.0) .512
Tilt
(17.5) .689
(10.5) .413
(11.5) .453
M2032SS1W01
Touch
Solder Lug
Four Pole
Indicators
Keyway
1/4-40 Thd
(1.1) x (2.0) Typ .043 x .079 (4.7) Typ .185 (0.8) Typ .031 (0.5) Typ .020 (4.5) .177
12 11 10 9 8 7 6 5 4 3 2 1
25
Accessories
(13.0) .512
(11.5) .453
Supplement
M2042SS1W01
A58
www.nkk.com
Series M
A
AT509 Lockwasher Steel with Zinc/Chromate (not supplied with splashproof models)
(6.4) Dia (10.2) Dia .252 .402
(9.0) .354
(1.5) .059
(1.7) .067
(0.8) .031
(0.5) .020
(1.78) .070
AT508 Lockwasher Steel with Zinc/Chromate (not supplied with splashproof models)
(12.1) .476
(14.3) .563
(14.0) .551
(16.0) .630
(2.4) .094
(2.8) .110
(9.5) .374
(1.0) .039
(1.0) .039
(0.5) .020
(16.0) .630
(2.0) .079
(1.5) .059
AT402 .760 (19.3mm) Boot for B2 Toggle Silicon Rubber (8.0) Dia
.315 (15.3) .602 (19.3) .760 (23.8) .937 (12.4) Dia .488 (18.0) Dia .709
(0.5) .020
AT401A/H/S .461 (11.7mm) Boot, Nut and O-ring for B2 Toggle More details in Accessories section
(16.0) Dia .630 (17.0) Dia .669 (17.5) Dia .689
AT4181 .732 (18.6mm) Boot, Nut and O-ring for B2 Toggle More details in Accessories section
(8.0) Dia .315 (14.8) .583 (18.6) .732 (24.3) .957 (13.8) Dia .543 (21.5) Dia .846
(1.0) .039
www.nkk.com
A59
Supplement
Accessories
Indicators
Touch
(14.3) .563
Tilt
Tactiles
Slides
Rotaries
Keylocks
M12 P1
Programmable Illuminated PB
Pushbuttons
Rockers
AT507H for Inch AT507M for Metric Locking Ring Steel with Zinc/Chromate
Toggles
Series M
Toggles
Rockers
Pushbuttons
Programmable Illuminated PB
Poles
1 2 SPDT DPDT SP3T S S2 S3 E E2 E4
Small Toggles
.413 (10.5mm) Bat .200 (5.08mm) Bat .256 (6.5mm) Bat .450 (11.4mm) Flatted .256 (6.5mm) Flatted .840 (21.3mm) Flatted .550 (14.0mm) Cone .640 (16.26mm) Cone .840 (21.3mm) Cone A2 S2 A1 S1
Small Bushings
.280 (7.1mm) Smooth with Keyway .350 (8.9mm) Smooth with Keyway .280 (7.1mm) Threaded with Keyway .350 (8.9mm) Threaded with Keyway Deduct bracket thickness of .020 (0.51mm) from above dimensions A W G
Optional Caps
For S Bat Toggle Conical Cap for S Bat Toggle A B C E Cap for Locking Lever No Code A C G Nickel Plated Supplied with Switch Black Blue Red F G
Cap Colors
Black White Red Yellow Green Blue
Keylocks
Circuits
2 ON ON ON (ON) ON ON (ON) ON NONE OFF NONE OFF OFF ON ON ON ON ON (ON) (ON) (ON) ON (ON) (ON) 3 5 8 9
Q Q2 Q4
Rotaries
Slides
*4 *6 *7
13
.250 (6.35mm) Straight PC with .465 (11.8mm) Bracket .425 (10.8mm) Straight PC with .630 (16.0mm) Bracket .964 (24.5mm) Straight PC with 1.150 (29.2mm) Bracket With Reinforced Bracket .250 (6.35mm) Straight PC with .465 (11.8mm) Bracket .425 (10.8mm) Straight PC with .630 (16.0mm) Bracket .750 (19.05mm) Straight PC with .953 (24.2mm) Bracket DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Locking Lever
L .201 (5.1mm) Dia. Locking Lever L2
Tactiles
( ) = Momentary
* 3-ON circuits
17
Tilt
Touch
Indicators
IMPORTANT:
Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page.
Accessories
Supplement
A60
www.nkk.com
www.nkk.com
A61
Supplement
Accessories
Indicators
Touch
M2022SS2G13-BC
Tilt
Tactiles
15
Slides
Toggle dimensions are based on use with a .350 (8.9mm) bushing; add .070 (1.78mm) to toggle length when combining with a .280 (7.1mm) bushing
Terminals
With Bracket
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
M20
S2
13
Toggles
Series M
Toggles
A
Down Pole Model
Keyway
Throw & Schematics Up Note: Terminal numbers are not actually on the switch.
Pushbuttons
Rockers
Center
SP
Programmable Illuminated PB
M2012 M2013 M2015 M2018 M2019 M2022 M2023 M2025 M2028 M2029
ON ON ON (ON) ON ON ON ON (ON) ON
NONE OFF NONE OFF OFF NONE OFF NONE OFF OFF
2-3
OPEN
2-1
SPDT
3
2 (COM) 1
DP
2-3 5-6
OPEN
2-1 5-4
DPDT
3
(COM) 1 6
5 4
For 3 Throw (3-On) Pole Model M2024 M2026 M2027 Connected Terminals & Schematics Down ON (ON) ON
External Connection 2 (in) 5
Keylocks
Center ON ON ON
External Connection 2 (in) 5
Up ON (ON) (ON)
External Connection 2 (in) 5
SP
Rotaries
Slides
1 (out)
3 4 (out) 6 (out)
1 (out)
3 4 (out) 6 (out)
1 (out)
3 4 (out) 6 (out)
2-3 5-6
2-3 5-4
2-1 5-4
(out)
SMALL TOGGLES
Tactiles
Important: Toggle length changes based on bushing selected. All illustrations are shown with .350 (8.9mm) long bushing. When using a .280 (7.1mm) long bushing, toggle length increases .070 (1.78mm). Standard Material & Finish: Brass with Bright Chrome Contact factory for optional finishes. .256 (6.5mm) Flatted
S2
S3
E
(5.08) .200
Tilt
(2.8) Dia .110 (10.5) .413 (2.7) Dia .106 (5.08) .200
25
Touch
Indicators
E2
E4
(5.0) .197
Q2
Q4
Accessories
(3.1) Dia .122 (4.2) .165 (2.5) .098 (6.5) .256 25 (21.3) .840 (14.0) .550
25
25
(16.26) .640
(21.3) .840
Supplement
A62
www.nkk.com
Series M
A
(0.8) .031 (6.2) Dia .244 (0.9) .035
A1
S1
When using this bushing, toggle length is increased by .070 (1.78mm). Maximum Panel Thickness with Standard Hardware: .031 (0.8mm) Panel Cutouts
Maximum Panel Thickness with Standard Hardware: .102 (2.6mm) Standard Hardware: 2 Hex Nuts (AT513H) 1 Lockwasher (AT509) 1 Locking Ring (AT507H) For dimensions, see Accessories & Hardware section.
(0.6) .024
Locking Mechanism
on-none-on on-none-(on) on-off-(on) on-on-(on) on-off-on on-on-on (on)-off-(on) (on)-on-(on)
2 positions lock
25 (5.1) Dia .201 (16.5) .650
1 position locks
2 positions lock
3 positions lock
1 position locks
Supplied with Cap AT427 Material & Finish: Brass with Nickel Plating Lever Material & Finish: Brass with Chrome Plating
www.nkk.com
(0.5) .020
Blue
A63
Supplement
Black
Red
Accessories
No Code
Indicators
Touch
Tilt
Tactiles
(6.5) .256
Slides
Rotaries
(7.1) .280
(8.9) .350
Keylocks
Programmable Illuminated PB
(7.1) .280
(8.9) .350
Pushbuttons
Rockers
S2
Toggles
Series M
Toggles
A
W
Silver over Silver Gold over Brass or Copper
Rockers
Pushbuttons
Note: See Supplement section to find complete explanation of operating range. Power Level or Logic Level 6A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum
Programmable Illuminated PB
Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range.
TERMINALS
Straight PC Mount with Bracket Straight PC Mount with Reinforced Bracket
Keylocks
13
.250 (6.35mm) Terminal with .465 (11.8mm) Bracket
15
.425 (10.8mm) Terminal with .630 (16.0mm) Bracket
17
.964 (24.5mm) Terminal with 1.150 (29.2mm) Bracket
23
.250 (6.35mm) Terminal with .465 (11.8mm) Bracket
25
.425 (10.8mm) Terminal with .630 (16.0mm) Bracket
26
.750 (19.05mm) Terminal with .953 (24.2mm) Bracket
Tactiles
Slides
Rotaries
Tilt
Indicators
Material: Polyethylene
Material: Polyethylene
Accessories
Supplement
Black
White
Red
Yellow
Green
Blue
A64
www.nkk.com
Series M
A
Straight PC Bracket
(6.86) .270
BRACKET LENGTH (4.8) .189 (1.17) Typ .046 (1.17) .046 (3.2) .126 (4.5) .177
BRACKET LENGTH (4.8) .189 (1.17) Typ .046 (3.2) .126 (8.0) .315 (4.5) .177 (1.17) Typ .046 (4.8) .189 (12.7) .500
(0.9) .035 TERMINAL LENGTH (0.5) Typ .020 (0.8) Typ .031 (4.7) Typ .185 (15.8) .622
M2012S2A2G13
(7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059
3 2 1
(7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059
3 2 1
6 5 4
13 15 17
C L
(6.86) .270
Single Pole
BRACKET LENGTH (4.8) .189 (1.17) Typ .046 (1.17) .046 (4.5) .177 BRACKET LENGTH (4.8) .189 (1.17) Typ .046 (6.35) .250 (9.1) .358
Double Pole
(7.1) .280 (0.9) .035 TERMINAL LENGTH (0.5) Typ .020 (0.8) Typ .031
Keyway
(19.05) .750
M2012S2A2G23
Indicators
(3.18) Typ .125 (9.53) Typ .375 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059
3 2 1
(2.4) Typ .095 (3.18) Typ .125 (9.53) Typ .375 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059
3 2 1 6 5 4
Terminal Code: 23 25 26
www.nkk.com
A65
Supplement
C L
Accessories
Touch
Tilt
Tactiles
Slides
Rotaries
Keylocks
Terminal Code:
Terminal Length:
Bracket Length:
Programmable Illuminated PB
Pushbuttons
Single Pole
Double Pole
(7.1) .280
Keyway
Rockers
Toggles
Series M
Toggles
Rockers
Pushbuttons
Programmable Illuminated PB
Poles
1 2 3 SPDT DPDT SP3T 3PDT 4PDT DP3T on vertical models only. S S2 S3 E E2
Small Toggles
.413 (10.5mm) Bat .200 (5.08mm) Bat .256 (6.5mm) Bat .450 (11.4mm) Flatted .256 (6.5mm) Flatted A2 S2 A1 S1
Small Bushings
.280 (7.1mm) Smooth with Keyway .350 (8.9mm) Smooth with Keyway .280 (7.1mm) Threaded with Keyway .350 (8.9mm) Threaded with Keyway A W G
Optional Caps
For S Bat Toggle Conical Cap for S Bat Toggle A B C E Cap for Locking Lever No Code A C G Nickel Plated Supplied with Switch Black Blue Red F G
Cap Colors
Black White Red Yellow Green Blue
*4
Keylocks
* 4-pole available
Toggle dimensions are based on use with a .350 (8.9mm) bushing; add .070 (1.78mm) to toggle length when combining with a .280 (7.1mm) bushing.
Rotaries
Circuits
Slides
Locking Lever
ON ON (ON) (ON) (ON) ON (ON) (ON) L .201 (5.1mm) Dia. Locking Lever L2
Terminals
Slides
2 3 5 8 9
ON ON ON (ON) ON ON (ON) ON
.150 (3.81mm) Right Angle PC (1-3 Pole) Right Angle PCB (1 Pole & 0.4VA Rating Only) .150 (3.81mm) Vertical PC (1-4 Pole) .100 (2.54mm) Vertical PC (1-4 Pole)
Tactiles
*4 *6 *7
Tilt
( ) = Momentary
Standard Toggle, Bushing, & Terminal Combinations: DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Touch
M2012S2A2G40
Indicators
IMPORTANT:
Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page.
Accessories
Supplement
A66
www.nkk.com
www.nkk.com
A67
Supplement
Accessories
Gold Contacts with 0.4VA Rating Vertical PC Terminals with .150 (3.81mm) Terminal Spacing
Indicators
Tilt
Tactiles
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
M20
S2
A2
40
Toggles
Series M
Toggles
A
( Toggle Position ) = Momentary Center Up Down Pole Model
Keyway
Throw & Schematics Up Note: Terminal numbers are not actually on the switch. * Reverse circuits available for vertical mount SP & DP upon request.
Rockers
Center
Pushbuttons
* SP
Programmable Illuminated PB
NONE OFF NONE OFF OFF NONE OFF NONE OFF OFF NONE OFF NONE OFF OFF NONE OFF NONE OFF OFF
ON ON (ON) (ON) (ON) ON ON (ON) (ON) (ON) ON ON (ON) (ON) (ON) ON ON (ON) (ON) (ON)
2 (COM)
2-3
OPEN
2-1
SPDT
3 1
DP
M2025 * M2028 M2029 M2032 M2033 M2035 M2038 M2039 M2042 M2043 M2045 M2048 M2049
2-3 5-6
OPEN
2-1 5-4
DPDT
2 3
(COM) 1 6
5 4
Keylocks
3P
OPEN
3PDT
2 3 1 6
(COM) 4 9
8 7
Rotaries
4P
OPEN
4PDT
2 3 1 6
(COM) 4 9
8 7 12
11 10
Slides
Tactiles
Up
Down
External Connection 2 (in) 5
Center
External Connection 2 (in) 5
Up
External Connection 2 (in) 5
Tilt
SP
ON ON ON
ON (ON) (ON)
1 (out)
3 4 (out) 6 (out)
1 (out)
3 4 (out) 6 (out)
1 (out)
3 4 (out) 6 (out)
2-3 5-6
Touch
External Connection 2 (in) 5 External Connection 8 (in) 11
2-3 5-4
External Connection 2 (in) 5 External Connection 8 (in) 11
2-1 5-4
External Connection 2 (in) 5 External Connection 8 (in) 11
Indicators
DP
ON ON ON
ON (ON) (ON)
1 (out)
Accessories
(out)
3 5 4 2 1
Supplement
(out)
(out)
(out)
Series M
A
S2
.200 (5.08mm) Bat
(2.7) Dia .106 (5.08) .200 25
(5.08) .200
SMALL BUSHINGS A2
.280 (7.1mm) Smooth with Keyway
(0.8) .031 (6.2) Dia .244
(0.8) .031
A1
S1
When using this bushing, toggle length is increased by .070 (1.78mm). Maximum Panel Thickness with Standard Hardware: .031 (0.8mm) Panel Cutouts For A2, S2, A1 or S1 Bushing with Keyway For A1 or S1 Bushing with Locking Ring
Standard Hardware: 2 Hex Nuts (AT513H) 1 Lockwasher (AT509) 1 Locking Ring (AT507H) For dimensions, see Accessories & Hardware section.
A69
(0.6) .024
www.nkk.com
Supplement
(5.6) .220
(6.5) .256
Accessories
Indicators
Touch
(2.5) .098
(2.5) .098
Tilt
Tactiles
Slides
(2.5) .098
(2.5) .098
Rotaries
S2
Keylocks
Standard Material & Finish: Brass with Bright Chrome Contact factory for optional finishes.
Programmable Illuminated PB
S3
E2
Pushbuttons
Rockers
25
Toggles
Series M
Toggles
A
LL2
Smooth with Keyway
Rockers
Locking Mechanism
on-none-on on-none-(on) on-off-(on) on-on-(on) on-off-on on-on-on (on)-off-(on) (on)-on-(on)
Pushbuttons
(0.8) .031
(2.5) .098
Programmable Illuminated PB
2 positions lock
(5.1) Dia .201 (16.5) .650 (8.0) .315 (15.0) .591 25
1 position locks
2 positions lock
3 positions lock
1 position locks
No Code
(4.6) Dia .181 (6.2) Dia .244 (0.9) .035
Cap for Locking Lever Supplied with Cap AT427 Material & Finish: Brass with Nickel Plating Lever Material & Finish: Brass with Chrome Plating
A G
Black Blue
Red
Keylocks
Slides
Rotaries
Tactiles
Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range.
Tilt
TERMINALS 30
.150 (3.81mm) Right Angle PC (1-3 Pole)
(4.7) Typ .185 (3.81) Typ .150 (3.96) Typ .156 (9.27) .365 (2.54) Typ .100 (1.8) Dia Typ .073
32
8 5 2
Touch
Right Angle PCB with Reverse Circuit (1 Pole & 0.4VA Rating Only)
Indicators
6 3
5 2
4 1
9 6 3
7 4 1
(14.35) .565
Accessories
Single Pole
Double Pole
Three Pole
Supplement
Terminal dimensions are shown on the Typical Switch Dimensions pages which follow.
A70
www.nkk.com
Series M
A
6 5 4
3 2 1
6 5 4
2 1
2 1
5 4
8 7
11 10
Single Pole
Double Pole
Three Pole
Four Pole
45
(4.8) .189
3 2 1
3 2 1
6 5 4
9 8 7
3 2 1
6 5 4
9 8 7
12 11
10
Terminal dimensions are shown on the Typical Switch Dimensions pages which follow.
Colors Available
Material: Polyethylene
Material: Polyethylene
B C
White
F G
Green
Tilt
Red
Blue
(9.0) .354
(1.5) .059
(1.7) .067
(0.8) .031
(0.5) .020
www.nkk.com
A71
Supplement
Accessories
Indicators
AT513H for Inch AT513M for Metric Hex Nut (2 per switch) Brass/Nickel
AT507H for Inch AT507M for Metric Locking Ring (1 per switch) Steel with Zinc/Chromate
AT509 Lockwasher (1 per switch, none with splashproof) Steel with Zinc/Chromate
Touch
STANDARD HARDWARE
Tactiles
Black
Yellow
Slides
Rotaries
Single Pole
Double Pole
Three Pole
Four Pole
Keylocks
(12.7) .500
(12.7) .500
(14.35) .565
(14.35) .565
Programmable Illuminated PB
Pushbuttons
(12.7) .500
(12.7) .500
(14.35) .565
(14.35) .565
Rockers
12
Toggles
Series M
Toggles
A
.150 (3.81mm) Right Angle PC
Single Pole
(6.2) Dia .244
1 2 3
Rockers
Keyway
Pushbuttons
Programmable Illuminated PB
(6.86) .270
(7.32) .288
M2012S2A2G30
Double Pole
(6.2) Dia .244
4 5 2 6 3
Keylocks
Rotaries
(6.86) .270
(7.32) .288
M2022S2A2G30
Slides
Three Pole
(6.2) Dia .244 (0.9) .035
Tactiles
7 4 1
8 5 2
9 6 3
(17.5) .689
(4.3) .169
Tilt
Touch
M2032S2A2G30
(6.86) .270
(8.0) .315
Indicators
Accessories
(4.55) .179 (0.9) .035 (6.2) .245 (6.86) (8.9) .270 .350 (2.7) .106
Supplement
(0.8) .031
(13.0) .512
M2012S2A2G32
A72
www.nkk.com
Series M
A
.150 (3.81mm) Vertical PC
Rockers
1
(6.86) .270
(7.32) .288
(7.9) .311
M2012S2A2G40
Double Pole
Keyway (6.2) Dia .244
6 5 4 3 2 1
(6.86) .270
(7.32) .288
M2022S2A2G40
Keyway
(0.9) .035
9 8 7 6 5 4 3 2 1
(13.0) .512
(6.86) .270
(8.0) .315
(2.7) .106
M2032S2A2G40
Four Pole
Keyway (6.2) Dia .244 (0.9) .035
12 11 10 9 8 7 6 5 4 3 2 1
(13.0) .512
M2042S2A2G40
www.nkk.com
A73
Supplement
(6.86) .270
(8.0) .315
(2.7) .106
Accessories
Indicators
Touch
Tilt
Tactiles
Slides
Three Pole
Rotaries
(2.7) .106
Keylocks
(13.0) .512
Programmable Illuminated PB
Pushbuttons
25
(13.0) .512
Toggles
Series M
Toggles
A
.100 (2.54mm) Vertical PC
Keyway
Single Pole
(6.2) Dia .244
3
Rockers
Pushbuttons
2 1
(13.0) .512
Programmable Illuminated PB
(6.86) .270
(7.32) .288
(7.9) .311
M2012S2A2G45
Double Pole
(6.2) Dia .244
6 3 2 1
Keylocks
5 4
(13.0) .512
Rotaries
(6.86) .270
(7.32) .288
(2.7) .106
M2022S2A2G45
Slides
Three Pole
(6.2) Dia .244 (0.9) .035
9 8 7 6 5 4 3 2 1
Tactiles
(13.0) .512
(6.86) .270
(8.0) .315
Tilt
(2.7) .106
M2032S2A2G45
Touch
Four Pole
(6.2) Dia .244 (0.9) .035
12 11 10 9 8 7 6 5 4 3 2 1
Indicators
25
(13.0) .512
Accessories
Supplement
(6.86) .270
(8.0) .315
(2.7) .106
M2042S2A2G45
A74
www.nkk.com
Series M2100
Toggles
Rockers
General Specifications
Electrical Capacity (Resistive Load)
Power Level (silver): Logic Level (gold): 6A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section.
Pushbuttons
Programmable Illuminated PB
Other Ratings
Keylocks
Angle of Throw:
10 milliohms maximum for silver; 20 milliohms maximum for gold 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 50,000 operations minimum 25,000 operations minimum On-to-On Position Off-to-On Position Single Pole 3.19N 3.92N Double Pole 4.41N 7.06N 20
Bushing: Housing: Mounting Bracket: Movable Contacts: Stationary Contacts: Lamp Contacts: Base: Switch Terminals: Lamp Terminals:
Brass with nickel plating Stainless steel Steel with tin plating Silver alloy or silver alloy with gold plating Silver with silver plating or copper or brass with gold plating Phosphor bronze Diallyl phthalate (UL94V-0) Copper with silver or gold plating Brass with silver or gold plating
Slides
Rotaries
Tactiles
Environmental Data
Tilt
10C through +55C (+14F through +131F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Touch
Cleaning:
Indicators
1.47Nm (13 lbin) for double nut; .67Nm (6 lbin) for single nut Wave Soldering (PC version): See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Note: Lever must be in center position while soldering. PC mountable device is not process sealed. Hand clean locally using alcohol based solution.
CSA:
Supplement
UL94V-0 base File No. E44145 - Recognized only when ordered with marking on switch. Add /U to end of part number to order UL recognized switch. Single pole with synchronous circuits & single color LEDs & solder lug or PC recognized at 6A @ 125V AC File No. 023535_0_000 - Certified only when ordered with marking on switch. Add /C to end of part number to order CSA certified switch. All single pole with synchronous circuits & single color LEDs certified at 6A @ 125V AC
Accessories
A76
www.nkk.com
Series M2100
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Industrys first LED illumination at tip of toggle switches. Single color LEDs of red, yellow, and green, plus bicolor red/green, to meet varied design requirements. LEDs can operate independently from or synchronously with switching operation. Antijamming feature to protect contacts from damage due to excessive downward force on the toggle. High torque bushing prevents the bushing from rotating or separating from the metal frame during installation. Stainless steel frame resists corrosion. Silver contacts are of specially composed alloy for hardness. High insulating barriers protect against crossover in double pole devices. Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants. 1,500V dielectric strength between switch contacts and case is accomplished by clinching the frame away from the terminals.
Actual Size
www.nkk.com
A77
Series M2100
Toggles
Pushbuttons
Rockers
M21
Poles
1 *2 SPDT DPDT
2
LED Circuits & Actuator Types L T Isolated
01
Threaded Bushings
No Code /M 1/440 Thread (Inch) 6mm Thread (Metric)
Programmable Illuminated PB
Synchronous
Circuits
2 ON ON NONE OFF ON ON C E F 3
LED Colors
Single Color Red Yellow Green Bicolor CF Red/Green 01 02 03 30
Rotaries
Keylocks
Slides
IMPORTANT:
Switches are supplied without UL & CSA marking unless specified. UL & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page.
Tilt
Tactiles
M2112TCW01
Red LED
Indicators
Synchronous LED Circuit in Actuator SPDT ON-NONE-ON Switch Circuit Silver Contacts with 6-Amp Rating 1/440 Threaded Bushing
Accessories
Supplement
A78
www.nkk.com
Series M2100
POLES & CIRCUITS & LED ILLUMINATION
Toggle Position & Terminal Numbers Down
Keyway
A
Schematics
Model M2112
LED Circuit
Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals
L(+) 3 1 4 6
L(-)
4 COM
M2113
SPDT
Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals
2 (COM)
L(+) 3 1 4 6
L(-)
2 (COM)
5 COM (+)
External Connection
M2122
DPDT
Connected Power Terminals LED Circuit Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals
ON 2-3 5-6
ON 7-9 ON 7-9 Red 8-9
NONE NONE
NONE NONE NONE NONE NONE NONE
ON 2-1 5-4
ON 7-9 OFF OPEN Green 8-7
2 (COM)
Red Green
M2123
DPDT
Connected Power Terminals LED Circuit Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals
ON 2-3 5-6
ON 7-9 ON 7-9 Red 8-9
OFF OPEN
ON 7-9 OPEN OFF OPEN
ON 2-1 5-4
ON 7-9 ON 7-9 Green 8-7
2 (COM)
OFF
2 (COM)
Red Green
4 External Connection
8 COM (+)
The electrical specifications shown are determined at a basic temperature of 25C. LED circuit is isolated and requires an external power source. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in Supplement Section. The LED is an integral part of the switch and not available separately. Bicolor LED is translucent white when unlit.
Single Color
Bicolor
C
Color Red 25 20 2.1 4 0.33 I FM IF VF VRM I F
E
Yellow 30 20 2.1 4 0.40
F
Green 30 20 2.1 4 0.40 10 ~ +55C
CF
Red/Green 25 10 1.7/2.0 0.33/0.33 Units mA mA V V mA/C
Forward Peak Current Typical Forward Current Forward Voltage Reverse Peak Voltage Current Reduction Rate Above 25C Ambient Temperature Range
www.nkk.com
A79
Tilt
Tactiles
L(+)
L(-)
Slides
7 COM
Rotaries
2 (COM)
L(+)
L(-)
Keylocks
Red Green
Programmable Illuminated PB
Pushbuttons
2 (COM)
Rockers
Center
Up
Notes: Terminal numbers are not actually on the switch. LEDs require an external power source.
Toggles
Series M2100
Toggles
A
L T
(14.7) .579
(14.7) .579
Rockers
Pushbuttons
Finish: Brushed aluminum Standard Hardware: 2 AT513H Hex Nuts, 1 AT507H Locking Ring, 1 AT509 Lockwasher Standard & optional hardware details in Accessories & Hardware section.
1/4-40 Thd (6.2) Dia .244 (6.5) Dia .256 (2.2) Dia .087 (6.5) .256
Programmable Illuminated PB
Threaded Bushing combines with Terminal codes 01, 02, & 03.
Single Pole
1/4-40 Thd (4.8) .189 (0.8) Typ .031
6 5 3 2 1
Keylocks
(4.7) Typ .185 (0.9) .035 (6.35) .250 (1.17) Typ .046
(13.0) .512
Rotaries
(12.7) .500
(14.7) .579
(8.0) .315
(20.3) .799
(4.8) .189
M2112TCFW01
Slides
Solder Lug
(6.35) .250 Keyway
Double Pole
1/4-40 Thd (4.8) .189 (0.8) Typ .031
9 8 6 5 4 3 2 1
Tactiles
(4.7) Typ .185 (0.9) .035 (6.35) .250 (1.17) Typ .046
(13.0) .512
(17.5) .689
(14.7) .579
(8.0) .315
(20.3) .799
Tilt
M2122TCFW01
Touch
Right Angle PC
Keyway
Indicators
Accessories
Supplement
(14.7) .579
(7.6) .299
(16.4) .646
M2112TCFG30
A80
www.nkk.com
Series M2100
A
6A @ 125V AC & 3A @ 250V AC
Rockers Toggles Supplement Accessories Indicators Touch Tilt Tactiles
(6.4) Dia (10.2) Dia .252 .402 (0.5) .020
Logic Level
TERMINALS 01
Solder Lug with Turret LED Terminal
Epoxy Seal (6.35) (4.8) .250 .189 (1.17) .046 (2.0) .079 (4.0) .157 (2.0) .079 (1.1) .043
02
Quick Connect
(6.35) (4.8) .250 .189
Single Pole
3
Double Pole Single color LED & isolated bicolor LED switches do not have terminal 5.
3 2 1 6 5 4 9 8 7
(4.8) .189
30
Right Angle PC LED terminals only available in brass with silver plating
6 3
5 2
4 1
(3.81) .150
(16.4) .646
Single color LED & isolated bicolor LED switches do not have terminal 5.
AT507H Locking Ring (1 per switch) Material: Steel with chromate over zinc
(6.35) Dia .250
AT509 Lockwasher (1 per switch) Material: Steel with chromate over zinc
(9.0) .354
(1.5) .059
(1.7) .067
(0.8) .031
Optional Hardware: Knurled nuts, dress nuts, and ON-OFF plates are available; see details in Accessories & Hardware section.
www.nkk.com
A81
Slides
Single Pole
Rotaries
6 5
Epoxy Seal
Single color LED & isolated bicolor LED switches do not have terminal 8.
Keylocks
03
Programmable Illuminated PB
Series M2
Toggles
Rockers
General Specifications
Electrical Capacity (Resistive Load)
Power Level (silver): Logic Level (gold): Logic/Power Level: (gold over silver) 6A @ 125V AC or 3A @ 250V AC; 4A @ 30V DC (On-On circuit) & 3A @ 30V DC (all other circuits) 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Combines silver & gold ratings Note: Find additional explanation of dual rating & operating range in Supplement section.
Programmable Illuminated PB
Pushbuttons
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Contact Timing: Angle of Throw:
Keylocks
10 milliohms maximum for silver; 20 milliohms maximum for gold 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 100,000 operations minimum 25,000 operations minimum for silver; 50,000 operations minimum for gold Nonshorting (break-before-make) 26
Slides
Stationary Contacts:
Tactiles
Terminals:
Brass with nickel plating Brass with tin plating Glass fiber reinforced polyamide (UL94V-0) Nitrile butadiene rubber Glass fiber reinforced polyamide (UL94V-0) Silver alloy with silver plating (code W); copper or phosphor bronze with gold plating (code G); or silver alloy with gold plating (code A) Silver alloy with silver plating (code W); copper or brass with gold plating (code G); or silver alloy with gold plating (code A) Copper or brass with silver or gold plating
Environmental Data
Operating Temp Range: Humidity: Vibration: Shock: 30C through +85C (22F through +185F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Tilt
Touch
PCB Processing
Soldering: Cleaning: Wave Soldering Recommended: See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section.
Indicators
Accessories
CSA:
Supplement
A82
www.nkk.com
Series M2
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Antijamming actuator design protects against mechanism damage from downward force on the toggle. Single unit construction of the bushing and top of the housing gives protection from cleaning fluids orother liquids.
O-ring surrounding actuator at top of bushing interior prevents liquids from reaching switch mechanism.
Ultrasonic welding of upper and lower housing seals out contaminants and allows automated soldering and cleaning.
Terminals are epoxy sealed to prevent entry of flux, solvents, and other contaminants.
Bracketed models have crimped legs to ensure secure PC mounting and prevent dislodging during automated soldering.
Logic level and power capabilities are available to suit varying applications.
Actual Size
www.nkk.com
A83
Series M2
Toggles
Programmable Illuminated PB
Pushbuttons
Rockers
M2T
A5
03
Poles
1 2 SPDT DPDT A5
Bushing
.250 (6.35mm) Double Flatted 03 13 30 40 05
PC Terminals
Straight Straight with .460 (11.7mm) Bracket .150 (3.81mm) Right Angle .150 (3.81mm) Vertical .390 (9.9mm) Extended PC .728 (18.5mm) Extended PC .945 (24.0mm) Extended PC
Keylocks
Circuits
2 3 5 8 9 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) A W G
06 07
Rotaries
( ) = Momentary
Slides
Actuators
S S4 .500 (12.7mm) Bat Lever .300 (7.62mm) Bat Lever
IMPORTANT:
Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page.
Tilt
Tactiles
M2T12SA5G03
.500 (12.7mm) Bat Lever .250 (6.35mm) Bushing with Double Flat Gold Contacts with 0.4VA Rating
Indicators
Accessories
Supplement
A84
www.nkk.com
Series M2
A
Throw & Schematics Terminal numbers are not actually on the switch.
Rockers Toggles Supplement Accessories Indicators Touch Tilt Tactiles
(6.2) .244 (5.2) .205 (6.35) .250
SP
2-3
OPEN
2-1
SPDT
3
2 (COM) 1
DP
2-3 5-6
OPEN
2-1 5-4
DPDT
2 3
(COM) 1 6
5 4
ACTUATORS S
.500 (12.7mm) Bat Lever
(2.8) Dia .110 (12.7) .500 26
S4
26
BUSHING A5
.250 (6.35mm) Double Flatted
(6.8) .268
Logic Level
Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section for complete explanation of dual rating and operating range.
www.nkk.com A85
Slides
Standard Combinations: S Bat Lever with straight terminals (code 03) with silver or gold contacts.
Standard Combinations: S4 Bat Lever with bracketed terminals (codes 13, 30, 40) with silver or gold contacts.
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Series M2
Toggles
A
03
Straight
Epoxy Seal (4.8) (5.9) .189 .232 (1.17) .046 Thk = (0.8) .031
Rockers
3 2 1
(4.8) .189
6 5 4
2 1
Pushbuttons
Single Pole
Double Pole
(1.6) Typ .063 (2.4) Typ .095
3 2 1 6 5 4
Programmable Illuminated PB
13
(1.6) Typ .063 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059
(7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059
C L
Keylocks
Single Pole
Double Pole
(4.7) Typ .185 (3.81) .150 (12.7) .500 (2.54) Typ .100 (1.8) Dia Typ .073
30
Rotaries
6 3
5 2
4 1
Slides
(3.81) .150
Single Pole
Tactiles
Double Pole
40
3 2 1
6 5 4
2 1
(12.7) .500 (3.81) .150 (2.54) Typ .100 (1.8) Dia Typ .073
Touch
Tilt
Single Pole
Double Pole
Indicators
05 06 07
(4.8) .189
6 5 4
Accessories
A
(1.27) .050
2 1
2 1
Single Pole
Double Pole
Supplement
Dimension A = terminal lengths as shown beside the terminal codes at the left.
A86
www.nkk.com
Series M2
A
Straight PC
Rockers
NKK P/N This Side (4.7) Typ .185 (0.8) Typ .031
3 2
(6.2) .244
26
(12.7) .500
(5.2) .205
(12.7) .500
(6.6) .260
M2T12SA5G03
Double Pole
Straight PC
NKK P/N This Side (4.7) Typ .185 (0.8) Typ .031 (2.8) Dia .110 (5.2) .205 (12.7) .500 (6.35) .250 (9.4) .370 (21.6) .850 (4.8) .189 (11.5) .453
6 5
(4.8) .189
3 2
(6.2) .244
26
(12.7) .500
Straight PC Bracket
26 (2.7) Dia .106 (7.62) .300 (5.8) .228 NKK P/N This Side (4.8) .189 (11.7) Typ .460 (4.7) Typ .185 (6.2) .244
(15.75) .620
(8.0) .315
(11.5) .453
M2T12S4A5G13
www.nkk.com
A87
Supplement
Accessories
Indicators
Touch
Tilt
Tactiles
M2T22SA5G03
Slides
Rotaries
Keylocks
Programmable Illuminated PB
(6.35) .250
(4.8) .189
(1.17) .046
Pushbuttons
Toggles
Series M2
Toggles
A
Right Angle PC
NKK P/N This Side (5.2) .205
Single Pole
(6.2) .244 (2.7) Dia .106
1 2 3
Rockers
Pushbuttons
(7.62) .300
(6.15) .242
(1.27) .050
Programmable Illuminated PB
M2T12S4A5G30
Right Angle PC
NKK P/N This Side (6.2) .244
Double Pole
(2.7) Dia .106
4 5 6
(11.5) .453
(3.7) .146
Keylocks
(7.62) .300
(6.15) .242
M2T22S4A5G30
Rotaries
Vertical PC
(7.2) .283
Single Pole
NKK P/N This Side
3
Slides
(6.2) .244
26
(1.0) .039 (0.5) .020 (0.4) .016 (12.7) .500 (0.8) Typ .031 (3.81) Typ .150
Tactiles
(1.27) .050
M2T12S4A5G40
Tilt
Vertical PC
(7.2) .283
Double Pole
NKK P/N This Side
6
(4.8) .189
3 2
Touch
(6.2) .244
26
(1.0) .039
Indicators
(2.7) Dia .106 (1.3) Typ .051 (5.08) .200 (7.62) .300 (6.15) .242 (0.4) .016 (12.7) .500
(0.5) .020
(11.5) .453
Accessories
M2T22S4A5G40
HANDLING PRECAUTION
When an application employs M2T model with silver contacts, 5 to 6A @ 125V AC, and the switch will be actuated 100 or more times per day, note these instructions: Peel off the film seal on the switch body situated over the part number after cleaning.
A88 www.nkk.com
Supplement
Series P
Toggles
Rockers
General Specifications
Electrical Capacity
Resistive Load: Motor Load: Lamp Load: 10A @ 125V AC or 6A @ 250V AC 400W @ 125V AC 2A @ 125V AC for On-Off-On circuit & 3A @ 125V AC for other circuits
Pushbuttons
Other Ratings
Programmable Illuminated PB
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw:
10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum between contacts for 1 minute minimum; 4,000V AC minimum between contacts & case for 1 minute minimum 100,000 operations minimum 25,000 operations minimum 25
Toggle Cap: Lever: Bushing: Frame: Case/Base: Movable Contacts: Stationary Contacts: Terminals:
Brass with nickel plating Brass with chrome plating Brass with nickel plating Stainless steel Diallyl phthalate resin (UL94V-0) Silver alloy with silver plating Pure silver with silver plating Copper with silver plating
Rotaries
Keylocks
Slides
Environmental Data
Tactiles
10C through +85C (+14F through +185F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Tilt
Wave Soldering Recommended (Straight PC): See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution.
Touch
Indicators
UL94V-0 rated case/base File No. E44145 - Recognized only when ordered with marking on switch. Add /U or /CUL to end of part number to order UL recognized switch. All models recognized at 10A @ 125V AC & 6A @ 250V AC. File No. 023535_0_000 - Certified only when ordered with marking on switch. Add /C to end of part number to order CSA certified switch. All models certified at 10A @ 125V AC & 6A @ 250V AC. License No. 119174 All models approved at 10A @ 125V AC & 6A @ 250V AC. Marking on switch is standard. All models meet EN 61058-1 standard.
CSA:
Accessories
VDE:
Supplement
A90
www.nkk.com
Series P
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Meets EN 61058-1 standard. High torque bushing construction prevents rotation or separation from frame during installation. Stainless steel frame resists corrosion and increases environmental safety. Case/base of heat resistant resin meets UL94V-0 flammability standard. Contacts of special silver alloy resist arcing and guarantee stable electrical contact and long life. High insulating barriers increase isolation of circuits in double pole devices and provide added protection to contact points. Prominent external insulating barriers increase insulation resistance and dielectric strength. Epoxy sealed terminals prevent entry of flux, solvents, and other contaminants. Clinching of the frame to the case well above the base and terminals provides 4,000V dielectric strength.
Actual Size
www.nkk.com
A91
Series P
Toggles
Pushbuttons
Rockers
P20
Poles & Circuits
11 12 13 21 22 23 SPST SPDT SPDT DPST DPDT DPDT ON ON ON ON ON ON NONE NONE OFF NONE NONE OFF OFF ON ON OFF ON ON
22
Toggles & Bushings
No Code E B D
B
Terminals
No Code P Z Solder Lug* Straight PC .187 (4.75mm) Quick Connect .512 (13.0mm) White Cap with 6mm Bushing .450 (11.4mm) Flatted with 6mm Bushing .689 (17.5mm) Large Bat with 12mm Bushing .748 (19.0mm) White Capped Column with 12mm Bushing * Wire harness & cable assemblies offered only in Americas
Keylocks
Programmable Illuminated PB
P2022B
.689 (17.5mm) Large Bat with 12mm Bushing DPDT ON-NONE-ON Circuit Solder Lug Terminals
Rotaries
IMPORTANT:
VDE is marked on all models. Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page.
Tactiles
Slides
Tilt
Center
Center
Touch
SP
Indicators
P2011
ON
NONE
OFF
1-1b
OPEN
OPEN
SPST
1 (COM) 1b 1 (COM)
SP
P2012 P2013
ON ON
NONE OFF
ON ON
1-1b
OPEN
1-1a
SPDT
1
1a
1b 2 2b
Accessories
DP
P2021
ON
NONE
OFF
1-1b 2-2b
OPEN
OPEN
DPST
(COM) 1b
Supplement
DP
P2022 P2023
ON ON
NONE OFF
ON ON
1-1b 2-2b
OPEN
1-1a 2-2a
DPDT
1a
(COM) 1b 2a
2 2b
A92
www.nkk.com
Series P
A
D
.748 (19.0mm) White Capped Column with 12mm Bushing
(4.4) Dia .173 (19.0) .748 25
(13.0) .512
(17.5) .689
Standard Hardware For 6mm Bushing: 1 Locking Ring AT507M, 1 Internal Tooth Lockwasher AT509, 2 Hex Nuts AT513M For 12mm Bushing: 1 Hex Face Nut AT503M, 1 Locking Ring AT506M, 1 Internal Tooth Lockwasher AT508, 1 Hex Mounting Nut AT527M Optional Splashproof Boot Assemblies (for code B): AT401 & AT4181 boots plus hex nut & o-ring; see Accessories & Hardware section.
TERMINALS No Code
Epoxy Seal
Solder Lug
(2.6) .102
Straight PC
(4.8) .189
SPST
SPDT
DPST
DPDT
1a
(10.16) .400
2a
1a
(10.16) .400
6mm Bushing
1b
25 (4.2) Dia .165 (11.0) .433 (13.0) .512 (0.9) .035 (8.0) .315 (22.0) .866 (5.0) .197
(20.5) .807
1a
(2.6) .102
12mm Bushing
25
(20.5) .807
2a
1a
(20.0) .787
(17.5) .689
(12.0) .472
(21.1) .831
(10.16) .400
P2022B A93
Supplement
(5.0) .197
Accessories
Indicators
P2012
Touch
Tilt
Tactiles
Slides
Epoxy Seal
(7.6) .299
1b
2b
1b
Rotaries
(6.35) .250
(9.0) .354
Keylocks
Programmable Illuminated PB
Panel Cutouts
Pushbuttons
25
(5.08) .200
25
Rockers
Toggles
Series S
Toggles
Programmable Illuminated PB
Pushbuttons
Rockers
Slides
Rotaries
Keylocks
Tactiles
Touch
Tilt
Indicators
Supplement
Accessories
A94
www.nkk.com
Series S
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Operating Temp Range: 10 milliohms maximum 200 megohms minimum @ 500V DC 1,500V AC minimum for 1 minute minimum 30,000 operations minimum 10,000 operations minimum 10C through +70C (+14F through +158F)
Environmental Data
Operating Temp Range: Sealing: 30C through +70C (22F through +158F) for Splashproof models; 10C through +70C (+14F through +158F) for all other models Splashproof models meet IP67 standard
Installation
Mounting Torque: Soldering Time & Temperature: 2.94Nm (26 lbin) for double nut Manual Soldering: See Profile A in Supplement section.
www.nkk.com
A95
Series S
Toggles
A
* CSA certified only when ordered with marking on switch (see General Specs)
Rockers
*Approvals Model
R
Inductive
AC 125V PF 0.6 Angle of Throw
Keyway
Pushbuttons
ON ON ON
(COM) 4 5
OFF ON ON
2
5A 5A 5A
2A 2A 2A
5A 5A 5A
3A 3A 3A
25 25 25
Programmable Illuminated PB
Notes: Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies (only for bat lever models): AT401 & AT4181 boots plus hex nut and o-ring. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas.
Keylocks
(9.0) .354
6 5 4 3 2 1
(12.5) Dia .492 (27.8) 1.094 (1.5) .060 (0.8) Typ .031 (11.5) .453
Rotaries
25 (6.0) Dia .236 (17.6) .693 (18.0) .709 (10.0) .394 (22.9) .902
(5.5) .217
S116
Supplement
Accessories
Indicators
Touch
Tilt
Tactiles
Slides
A96
www.nkk.com
Series S
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (): 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 30,000 operations minimum for S5AW, S8AW, S9AW, S25AW, S28AW, S29AW 50,000 operations minimum for all other models 25,000 operations minimum Shown in tables on following pages
Environmental Data
Operating Temp Range: Sealing: 30C through +70C (22F through +158F) for Splashproof models; 10C through +70C (+14F through +158F) for all other models Splashproof & lever lock panel seal models meet IP67 standard
Installation
Mounting Torque: Maximum Panel Thickness: Soldering Time & Temperature: 1.47Nm (13 lbin) for single nut on AW & AL models 2.94Nm (26 lbin) for double nut on other models Shown beneath panel cutout in switch dimension drawings Manual Soldering: See Profile A in Supplement section.
CSA:
www.nkk.com
A97
Series S
Toggles
A
* UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs)
Rockers
Inductive
AC 125V PF 0.6 Angle of Throw
US
Keyway
ON ON ON
OFF ON ON
2-1 2-1
2 (COM) 1
6A 6A 6A
8A 8A 8A
25 25 25
Pushbuttons
Programmable Illuminated PB
INTERNAL CONNECTION
Notes: Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas.
(2.4) Dia Typ .094 (0.8) Typ .031 25 (4.8) Typ .189 (12.5) Dia .492 (30.0) 1.181 (1.5) .060 (11.5) .453
Keyway
M12 P1
3 2 1
Keylocks
(6.0) Dia .236 (5.7) .224 (17.5) .689 (10.0) .394 (23.7) .933
Rotaries
(18.0) .709
S2A
Slides
*Approvals
Tactiles
Inductive
AC 125V PF 0.6
US
Keyway
= Angle of Throw
DPST
ON ON ON
OFF ON ON
8A 8A 8A
21 21 28
Tilt
INTERNAL CONNECTION
Notes: Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. * Wire harness & cables assemblies offered only in Americas.
Indicators
Touch
Keyway
M12 P1
Accessories
(6.0) Dia .236 (5.7) .224 (18.6) .732 (17.5) .689 (10.0) .394 (25.7) 1.012 (0.8) Typ .031
Supplement
Series S
A
Inductive
DC 30V AC 125V PF 0.6 Angle of Throw
Electrical Capacity
Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB = Angle of Throw Pushbuttons
Center
Up
AC 125V
Resistive
AC 250V
ON ON ON
OFF ON ON
2-1 2-1
2 (COM) 3 1
6A 6A 6A
8A 8A 8A
25 25 25
Notes: Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section.
Keyway (7.9) .311 (7.5) Typ .295 25
(6.35) Typ .250
M12 P1
3 2 1
(6.0) Dia .236 (11.7) .461 (18.0) .709 (17.5) .689 (10.0) .394 (29.7) 1.169
S2F
Center
Up
Inductive
AC 125V PF 0.6
DPST
ON ON ON
OFF ON ON DPDT
8A 8A 8A
21 21 28
INTERNAL CONNECTION
Notes: Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section.
Keyway M12 P1 (7.9) .311
(1.5) Dia Typ .060 (7.5) Typ .295 (6.35) Typ .250
5 4
2 1
(6.0) Dia .236 (11.8) .465 (18.6) .732 (17.5) .689 (10.0) .394 (31.8) 1.253 Note: S21F (11.7) .461
S6F A99
Toggles
Series S
Toggles
A
Approvals Model S1AW S2AW S3AW S5AW S8AW S9AW
R
Rockers
Down
Keyway
Center
Up
SPST
ON ON ON ON (ON) ON
6A 6A 6A 6A 6A 6A
24 24 28 20 24 24
Programmable Illuminated PB
Pushbuttons
INTERNAL CONNECTION
Notes: Standard Hardware: AT503M Face Hex Nut, AT508 Lockwasher, AT537 O-ring. See Accessories & Hardware section. For .250 Quick Connect terminals, add F to end of part number. See Quick Connect terminal dimensions on previous page. For further information, contact factory. * Wire harness & cable assemblies offered only in Americas.
(17.0) Dia .669 Flat (2.4) Dia Typ .094 (0.8) Typ .031 (4.8) Typ .189 M12 P1 (7.5) .295 (12.5) .492 (5.7) .224
Keylocks
3 2 1
(10.9) .429
(30.0) 1.181
(18.0) .709
(17.5) .689
(23.7) .933
S2AW
Rotaries
Slides
Center
Up
Tactiles
Model S21AW S6AW S7AW S25AW S28AW S29AW Throw & Schematics:
DPST
1
1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6
INTERNAL CONNECTION
2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4
(COM) 1 6 5 4
22 22 28 20 22 22
Tilt
Touch
Indicators
Notes: Standard Hardware: AT503M Face Hex Nut, AT508 Lockwasher, AT537 O-ring. See Accessories & Hardware section. For .250 Quick Connect terminals, add F to end of part number. See Quick Connect terminal dimensions on previous page. For further information, contact factory. * Wire harness & cable assemblies offered only in Americas.
(17.0) Dia .669 Flat
6 3
Accessories
(10.9) .429
(31.2) 1.228
M12 P1 (7.5) .295 (12.5) .492 (5.7) .224 (25.7) 1.012 (0.8) Typ .031
Supplement
(18.6) .732
(17.5) .689
Series S
A
= Angle of Throw
SINGLE POLE SOLDER LUG WITH LOCKING LEVER & PANEL SEAL *
Toggle Position/Connected Terminals Approvals Model S1AL S2AL S3AL
R
Electrical Capacity
Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB = Angle of Throw Pushbuttons
Center
Up
AC 125V
Resistive
AC 250V DC 30V
Inductive
AC 125V PF 0.6
US
ON ON ON
OFF ON ON SPDT
3
2-1 2-1
6A 6A 6A
8A 8A 8A
24 24 28
INTERNAL CONNECTION
Notes: Standard Hardware: AT503M Face Hex Nut, AT508 Lockwasher, AT537 O-ring. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas.
(7.4) Dia .291 (7.8) Dia .307 Flat (2.4) Dia Typ .094 (0.8) Typ .031 (4.8) Typ .189
3 2 1
(30.0) 1.181
(18.0) .709
S2AL
DOUBLE POLE SOLDER LUG WITH LOCKING LEVER & PANEL SEAL *
* UL & cULus recognized only when ordered with marking on switch (see General Specs)
*Approvals
R
Down
Center
Up
Inductive
AC 125V PF 0.6
US
DPST
1
OFF ON ON DPDT
3
8A 8A 8A
22 22 28
INTERNAL CONNECTION
Notes: Standard Hardware: AT503M Face Hex Nut, AT508 Lockwasher, AT537 O-ring. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas.
Flat
(31.2) 1.228
(18.6) .732
S6AL
www.nkk.com
A101
Toggles
Series S
Toggles
Rockers
Pushbuttons
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (): 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 6,000 operations minimum for S331F; 15,000 operations minimum for all other S331s; 25,000 operations minimum for all others Shown on following tables
Programmable Illuminated PB
Rotaries
Keylocks
Environmental Data
Operating Temperature Range: 10C ~ +70C (+14F ~ +158F)
Slides
Installation
Mounting Torque: Soldering Time & Temperature: 2.94Nm (26 lbin) for double nut; 1.47Nm (13 lbin) for single nut Manual Soldering: See Profile A in Supplement section.
Tactiles
Tilt
CSA:
Touch Supplement Accessories Indicators
A102
www.nkk.com
Series S
A
Electrical Capacity
Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons
US
Center
Up
AC 125V
Resistive
AC 250V DC 30V
Inductive
AC 125V PF 0.6 Angle of Throw
ON ON ON ON (ON) ON
6A 6A 6A 6A 6A 6A
32 32 32 32 32 32
INTERNAL CONNECTION
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas.
Keyway M12 P1 (3.2) Dia Typ .126
3
(12.5) Dia .492 (28.5) 1.122 (9.0) .354 (3.0) Dia .118
32
(6.1) Dia .240 (16.0) .630 (17.5) .689 (12.0) .472 (17.4) .685
S301
*Approvals Model S331 S332 S333 S335 S338 S339 Throw & Schematics: DPST
R
Inductive
AC 125V PF 0.6
US
= Angle of Throw
1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6
INTERNAL CONNECTION
2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4
(COM) 1 6 5
25 25 30 25 25 25
(ON) ON
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas.
Keyway M12 P1 (2.4) Dia Typ .094
(12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118
(6.1) Dia .240 (19.0) .748 (5.7) .224 (17.5) .689 (12.0) .472 (25.1) .988
S331 A103
Toggles
Series S
Toggles
A
*Approvals
R
* UL & cULus recognized only when ordered with marking on switch (see General Specs)
Rockers
Inductive
AC 125V PF 0.6 = Angle of Throw
Model
Pushbuttons
US
Keyway
1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6
INTERNAL CONNECTION
25 25 30 25 25
Programmable Illuminated PB
(ON) ON
Notes: Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas.
Keylocks
Keyway M12 P1
(12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118
Rotaries
Slides
S331R
Tactiles
Supplement
Accessories
Indicators
Touch
Tilt
A104
www.nkk.com
Series S
A
Electrical Capacity
= Angle of Throw Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons
Resistive
AC 250V DC 30V
Inductive
AC 125V PF 0.6
US
ON ON ON ON (ON) ON
6A 6A 6A 6A 6A 6A
32 32 32 32 32 32
INTERNAL CONNECTION
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section.
Keyway M12 P1 M3.5 P0.5
(12.5) Dia .492 32 (6.0) Typ .236 (5.0) Typ .197 (28.5) 1.122 (9.0) .354 (3.0) Dia .118
(6.1) Dia .240 (16.0) .630 (17.5) .689 (12.0) .472 (17.4) .685
S301T
*Approvals Model S331T S332T S333T S335T S338T S339T Throw & Schematics: DPST
1 3 4
R
Inductive
AC 125V PF 0.6
US
= Angle of Throw
1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6
6 INTERNAL CONNECTION
2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4
(COM) 1 6 5
25 25 30 25 25 25
(ON) ON
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section.
Keyway M12 P1 M3.5 x 5
(12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118
25
(6.6) .260
5 4
2 1
(6.1) Dia .240 (19.0) .748 (6.6) .260 (17.5) .689 (12.0) .472 (26.0) 1.024 (1.0) Typ .039
S331T A105
Toggles
Series S
Toggles
A
* UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs)
Rockers
Inductive
AC 125V PF 0.6
US
Keyway
= Angle of Throw
Pushbuttons
ON
1-3
NONE
OFF
15A
6A
20A
10A
32
INTERNAL CONNECTION
Programmable Illuminated PB
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section.
Keyway M12 P1
(12.5) Dia .492 (28.5) 1.122 (9.0) .354 (3.0) Dia .118
32
1
Keylocks
(6.1) Dia .240 (16.0) .630 (17.5) .689 (12.0) .472 (17.4) .685
Rotaries
S301F
Slides
*Approvals Model
R
Inductive
AC 125V PF 0.6
US
= Angle of Throw
Tactiles
OFF ON ON (ON)
2 3
25 25 30 25
Tilt
DPST
1 3 4 6
Touch
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section.
Indicators
Keyway M12 P1
(7.9) .311
(12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118
Accessories
(6.1) Dia .240 (19.0) .748 (11.7) .461 (17.5) .689 (12.0) .472 (30.3) 1.193 (0.8) Typ .031
Supplement
Series S
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (): 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 25,000 operations minimum Shown on following tables
Environmental Data
Operating Temp Range: 10C through +70C (+14F through +158F)
Installation
Mounting Torque: 2.94Nm (26 lbin) for double nut Maximum Panel Thickness: Shown beneath panel cutout in switch dimension drawings Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section.
CSA:
www.nkk.com
A107
Series S
Toggles
A
* UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs)
Rockers
*Approvals Model S31 S32 S33 S35 S38 S39 Throw & Schematics: 3PST
1
R
US
Pole & Throw 3PST 3PDT 3PDT 3PDT 3PDT 3PDT ON ON ON ON (ON) ON
Center
Up
Inductive
AC 125V PF 0.6
= Angle of Throw
1-3 4-6 7-9 2-3 5-6 8-9 2-3 5-6 8-9 2-3 5-6 8-9 2-3 5-6 8-9 2-3 5-6 8-9
2-1 5-4 8-7 2-1 5-4 8-7 2-1 5-4 8-7 2-1 5-4 8-7 2-1 5-4 8-7
2 1 6
9A 9A 9A 6A 6A 6A
8 7
25 25 30 25 25 25
Programmable Illuminated PB
Pushbuttons
6 7
INTERNAL CONNECTION
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas.
Keyway M12 P1 (2.4) Dia Typ .094 (0.8) Typ .031 (4.8) Typ .189
6 9 3
Keylocks
(12.5) Dia .492 (33.8) 1.331 (9.0) .354 (3.0) Dia .118
8 7
2 1
Rotaries
(5.0) .197
S32
(30.0) 1.181
(17.5) .689
(12.0) .472
(27.3) 1.075
Slides
*Approvals
R
US
Center
Up
Tactiles
ON 1-3 4-6 7-9 10-12 ON 2-3 5-6 8-9 11-12 ON 2-3 5-6 8-9 11-12 ON 2-3 5-6 8-9 11-12 (ON) 2-3 5-6 8-9 11-12 ON 2-3 5-6 8-9 11-12
OFF ON ON
9A 9A 9A 6A 6A 6A
11 12
25 25 30 25 25 25
4PST
1 3 4
(ON) 2-1 5-4 8-7 11-10 (ON) 2-1 5-4 8-7 11-10 (ON) 2-1 5-4 8-7 11-10 4PDT
3 2 1 6 5 (COM) 4
S48/S48R
Tilt
6 7
9 10
12
INTERNAL CONNECTION
10
Touch
Indicators
Notes: Standard Hardware for Bat Lever: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut; for Flatted Lever (R): AT504M Knurled Face Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies (only for bat lever models): AT401 & AT4181 boots plus hex nut and o-ring. See Accessories & Hardware section. (12.5) Dia * Wire harness & cable assemblies offered only in Americas. .492
Keyway M12 P1 (2.4) Dia Typ .094 (0.8) Typ .031 (4.8) Typ .189
11 10 7
Accessories
(34.2) 1.346
Supplement
S42R A108
Series S
A
Electrical Capacity
= Angle AC 250V PF 0.6 of Throw Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides AC 250V PF 0.6 = Angle of Throw Rotaries Keylocks Programmable Illuminated PB Pushbuttons
Resistive
AC 250V DC 30V
Inductive
AC 125V PF 0.6
US
Keyway
OFF ON ON 3PDT
3
9A 9A 9A
8 7
5A 5A 5A
25 25 30
INTERNAL CONNECTION
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section.
Keyway M12 P1 M3.5 x 5
6 9 3
(12.5) Dia .492 (33.8) 1.331 (9.0) .354 (3.0) Dia .118
25
8 7 4 5 2 1
(6.1) Dia .240 (7.5) .295 (30.0) 1.181 (17.5) .689 (12.0) .472 (29.8) 1.173
S32T
US
Center
Up
Inductive
AC 125V PF 0.6
ON ON ON
1-3 4-6 7-9 10-12 2-3 5-6 8-9 11-12 2-3 5-6 8-9 11-12
OFF ON ON
9A 9A 9A
8 7
5A 5A 5A
25 25 30
6 7
9 10
12
INTERNAL CONNECTION
10
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section.
Keyway M12 P1 M3.5 x 5
12
9 8
(12.5) Dia .492 (34.2) 1.346 (9.0) .354 (3.0) Dia .118
25
11 10
5 7 4
2 1
(6.1) Dia .240 (8.3) .327 (38.0) 1.496 (17.5) .689 (12.0) .472 (29.6) 1.165 (36.5) 1.437
S42T A109
Toggles
Series S
Toggles
A
* UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs)
Rockers
Inductive
AC 125V PF 0.6
US
Keyway
= Angle of Throw
Pushbuttons
OFF ON ON
9A 9A 9A
8 7
25 25 30
Programmable Illuminated PB
6 7
INTERNAL CONNECTION
3PDT
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section.
Keyway M12 P1 (7.9) .311
(1.5) Dia Typ .060 (7.5) Typ .295 (6.35) Typ .250
6 9 3
(12.5) Dia .492 (33.8) 1.331 (9.0) .354 (3.0) Dia .118
25
Keylocks
8 7
2 1
Rotaries
(30.0) 1.181
(17.5) .689
(12.0) .472
(33.3) 1.311
S32F
*Approvals
Tactiles
Inductive
US
Keyway
1-3 4-6 7-9 10-12 2-3 5-6 8-9 11-12 2-3 5-6 8-9 11-12
OFF
9A 9A 9A
11 12
25 25 30
Tilt
INTERNAL CONNECTION
10
Touch
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section.
Keyway M12 P1 (7.9) .311
Indicators
(12.5) Dia .492 (34.2) 1.346 (9.0) .354 (3.0) Dia .118
25
Accessories
2 1
(6.0) Dia .236 (11.8) .465 (36.5) 1.437 (17.5) .689 (12.0) .472 (33.1) 1.303
Supplement
Maximum Panel Thickness: S41F does not have terminals 2, 5, 8, & 11 .181 (4.6mm)
Series S
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (): 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 15,000 operations minimum Shown in tables on following pages
Environmental Data
Operating Temp Range: 10C through +70C (+14F through +158F)
Installation
Mounting Torque: Maximum Panel Thickness: Soldering Time & Temperature: 2.94Nm (26 lbin) for double nut Shown beneath panel cutout in switch dimension drawings Manual Soldering: See Profile A in Supplement section.
www.nkk.com
A111
Series S
Toggles
A
Approvals Model Pole & Throw DPST
1 3 4
Rockers
Down
Keyway
Center
Up
Inductive
PF 0.75 - 0.8 AC 125V AC 250V
Motor Load
AC 125V
= Angle of Throw
Pushbuttons
ON ON ON ON (ON) ON
1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6
2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4
2
24 24 28 24 24 24
Programmable Illuminated PB
INTERNAL CONNECTION
(COM) 1
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas.
Keyway M12 P1 (2.4) Dia Typ .094
Keylocks
6
(4.8) Typ .189
3
(33.2) 1.307
5 4
2 1
Rotaries
(6.1) Dia .240 (19.0) .748 (17.5) .689 (12.0) .472 (25.1) .988
(5.7) .224
S422
Slides
Tactiles
Center
Up
Inductive
PF 0.75 - 0.8 AC 125V AC 250V
Motor Load
AC 125V
= Angle of Throw
DPST
1
ON ON ON ON (ON) ON
1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6
2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4
2
24 24 28 24 24 24
Tilt
Touch
INTERNAL CONNECTION
(COM) 1
Indicators
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section.
Keyway M12 P1 M4 X 5
Accessories
3 5
(12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118
2 4 1
Supplement
(6.1) Dia .240 (19.0) .748 (17.5) .689 (12.0) .472 (31.1) 1.224
(11.0) .433
Series S
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum for S800s & S800Ds 3,000V AC minimum for 1 minute minimum for S732 50,000 operations minimum 10,000 operations minimum for S800Ds 25,000 operations minimum for S800s & S732
Environmental Data
Operating Temp Range: 10C through +70C (+14F through +158F)
Installation
Mounting Torque: 2.94Nm (26 lbin) for double nut Maximum Panel Thickness: Shown beneath panel cutout in switch dimension drawings
www.nkk.com
A113
Series S
Toggles
* UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs)
Rockers
Inductive
AC 125V AC 250V PF 0.6 PF 0.6
Motor Load
AC 125V
Keyway
Model
Pushbuttons
US
ON ON ON
2
OFF ON ON
1A 1A 1A
750W
Programmable Illuminated PB
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assembly: AT401 boot plus hex nut & o-ring. See Accessories & Hardware section.
Keyway M12 P1
6 3
M4.5x6
(12.5) Dia .492 (42.0) 1.654 (9.0) .354 (3.0) Dia .118
Keylocks
Rotaries
(12.0) .472 (22.0) .866 (12.0) .472 (34.0) 1.339 (24.0) .945
S822
Slides
Tactiles
Inductive
AC 125V PF 0.6 AC 250V PF 0.6
US
Keyway
ON ON ON
2 6
OFF ON ON 3PDT
3
1A 1A 1A
Tilt
Touch
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assembly: AT401 boot plus hex nut & o-ring. See Accessories & Hardware section.
Keyway M12 P1
6 9 3
M4.5x6
Indicators
(42.0) 1.654
Accessories
Supplement
(43.0) 1.693
Series S
A
Inductive L/R = 3ms
DC 400V DC 24V DC 48V DC 125V DC 250V
US
Keyway
6A 6A 6A
3A 3A 3A
DPST
3
DPDT
3
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section.
Keyway
M12 P1
6 3
Double Pole
M4.5x6
(42.0) 1.654
(9.0) .354
(27.0) 1.063
(12.0) .472
(34.0) 1.339
(24.0) .945
S822D
D L
(Patent Pending)
(2) (3)
(5) (6)
1 2
Minus Pole Connection
4 5
4. Compressed terminal connection When connecting screw terminal with compressed terminal, select compressed terminal using drawing below.
) .8 (9 86 .3
6
Plus Pole Connection
External Connection
www.nkk.com
(9.8) .386
A115
Toggles
Series S
Toggles
* UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs)
Rockers
US
Keyway
Pushbuttons
OFF
6A 6A 6A
3A 3A 3A
Programmable Illuminated PB
3PDT
3
Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section.
Three Pole
Keyway
M12 P1 M4.5x6
6 9 3
Keylocks
5 2 1 4
(42.0) 1.654
Rotaries
(4.0) .157
(8.15) .321
(43.0) 1.693
Slides
S831D does not have terminals 1, 4 & 7. Positive (+) must be connected to end terminals & negative to common terminals
Tilt
Tactiles
Touch
Indicators
Accessories
S832D
Supplement
A116
www.nkk.com
Series TL
Toggles
Rockers
General Specifications
Electrical Capacity (Resistive Load)
Power Level (silver): Logic Level (gold): 6A @ 125V AC or 3A @ 250V AC or 6A @ 12V DC for silver 0.4VA maximum @ 28V AC/DC maximum for gold (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: See Supplement Index for explanation of operating range.
Programmable Illuminated PB
Pushbuttons
Other Ratings
Keylocks
Mechanical Life: Electrical Life: Static Capability: Nominal Operating Force: Angle of Throw:
10 milliohms maximum for silver; 20 milliohms maximum for gold 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 50,000 operations minimum 25,000 operations minimum for silver; 50,000 operations minimum for gold Withstands 20 kilovolts ESD minimum 1.9N for .689 (17.5mm) toggle; 2.5N for .433 (11.0mm) toggle 25
Rotaries
Tactiles
Toggle: Housing: Sealing Ring: Base: Movable Contactor: Movable Contacts: Stationary Contact: Lamp Contacts: Power Terminals: Lamp Terminals:
Polycarbonate Glass fiber reinforced polyamide Nitrile butadiene rubber Diallyl phthalate (UL94V-0) Phosphor bronze with silver or gold plating Silver alloy or copper with gold plating Silver plus copper with silver plating or copper with gold plating Beryllium copper with silver plating Copper with silver or gold plating Brass with silver plating
Slides
Tilt
Environmental Data
Touch
10C through +55C (+14F through +131F) 90 ~ 95% humidity for 240 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 1.75 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Indicators
Installation
.98Nm (8.67 lb in) maximum Manual Soldering: See Profile B in Supplement section.
Accessories
Flammability Standards:
UL94V-0 base
Supplement
A118
www.nkk.com
Series TL
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Choice of long or short toggles in translucent colors combine with bright LEDs available in red, amber, and green, plus super bright LEDs available in white, green, and blue.
Panel seal, achieved with use of optional exterior o-ring, conforms to IP65 of IEC60529 Standards.
Interior o-ring protects contacts from oil, dust, water, and other contaminants.
Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants.
Actual Size
www.nkk.com
A119
Series TL
Toggles
Pushbuttons
Rockers
TL
Pole
2 DPDT
N
Toggle Colors
For Bright
W01
Housing
6G
LED Colors
Bright 5C 5D 5F 6B 6F 6G Red Amber Green White Green Blue
Programmable Illuminated PB
Black
C D F ON N
Circuit
2 ON NONE
Super Bright
Keylocks
Toggle Lengths
D .689 (17.5mm) (combines with silver contacts only) .433 (11.0mm) (combines with gold contacts only) W01
Rotaries
Tactiles
Slides
G01
Tilt
TL22DNAW016G
Touch
Indicators
.689 (17.5mm) Toggle Length; No Color (matte finish of clear material) Blue, Super Bright LED DPDT ON-NONE-ON Circuit Solder Lug Terminals Black Housing Silver Contacts with 6-amp Rating
Supplement
Accessories
A120
www.nkk.com
Series TL
A
Throw & Power/Lamp Schematics
Notes: Terminal numbers are not actually on switch. Lamp circuit is isolated and requires an external power source. DPDT
1a 1 (COM) 1b 2a 2 2b
(+) (-)
Connected Terminals
Up Down
Keyway
DP
TL22
ON
NONE
ON
1-1b 2-2b
OPEN
1-1a 2-2a
.689 (17.5mm)
(17.5) .689
.433 (11.0mm)
(11.0) .433
Red
Amber
Green
HOUSING A
Black
The housing consists of the one-piece bushing/case of glass fiber reinforced polyamide in black color only. The diallyl phthalate material used for the base is UL flammability rated 94V-0; housing material is not.
ATTENTION
Colored Toggles
Clear Toggles
Color I FM IF VF VRM I F
Red
Amber
Green
White
Green
Blue
20mA 2.0V 4V
20mA 2.27V 4V
20mA 3.6V 5V
20mA 3.6V 5V
A121
Supplement
Accessories
30mA
30mA
50mA
30mA
30mA
30mA
Indicators
5 Bright
6 Super Bright
Touch
Tilt
Tactiles
(2.0) .079 (3.0) (3.5) .118 .138 (2.0) Typ .079 (1.1) Typ .043
Slides
01 Terminals
Solder Lug
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Center
Center
Up
Toggles
Series TL
Toggles
A
17.5mm Toggle
Rockers
Keyway
M12 P1
(3.5) .138
(1.1) x (2.0) Typ .043 x .079 (0.6) Typ .024 (4.7) Typ (13.5) .185 .531 (0.8) Typ .031
Pushbuttons
25
I L( )v 2a
Programmable Illuminated PB
(2.5) .098
(5.4) .213
TL22DNAW016G
11.0mm Toggle
Keyway M12 P1 (3.5) .138 (1.1) x (2.0) Typ .043 x .079 (0.6) Typ .024 (4.7) Typ (13.5) .185 .531 (0.8) Typ .031
2a
Keylocks
25
Rotaries
I L( )v
(2.5) .098 (6.0) .236 (18.0) Sq .709 (21.0) .827 (5.4) .213
(11.0) .433
(10.0) .394
Slides
TL22SCAG015C
STANDARD HARDWARE
Tactiles
OPTIONAL HARDWARE
AT508 Lockwasher Not to use with Panel Seal Steel with Chromate/Zinc
(12.1) .476 (12.1) Dia .476 (17.5) Dia .689
Tilt
(14.0) .551
(14.0) .551
Touch
(13.8) Dia .543 (16.0) .630 (2.0) .079 (16.0) .630 (2.0) .079 (1.0) .039 (0.5) .020 (1.5) .059
Indicators
Accessories
Panel Cutouts
(12.5) Dia .492
Supplement
Maximum Panel Thickness with Standard Hardware & AT401P O-ring .236 (6.0mm)
A122
www.nkk.com
Series WT
Toggles
General Specifications
Electrical Capacity (Resistive Load)
Power Level: 10A @ 125V AC or 6A @ 250V AC or 10A @ 30V DC
Pushbuttons
Rockers
Other Ratings
Contact Resistance:
Programmable Illuminated PB
Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw:
10 milliohms maximum for solder lug & screw terminal models; 30 milliohms maximum for wire lead terminal models 200 megohms minimum @ 500V DC 1,500V AC minimum for 1 minute minimum 50,000 operations minimum for On-None-Off, On-None-On, & On-Off-On models 30,000 operations minimum for all other models 15,000 operations minimum 24
Keylocks
Toggle: Bushing & Outer Case: Inner Case: Inner Sealing Ring: Outer Sealing Ring: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Wire Lead Covers:
Brass with chrome plating Fiberglass reinforced polyamide (UL94V-0) Melamine Nitrile butadiene rubber for On-None-Off, On-None-On, & On-Off-On models; silicone rubber for all other models Natural rubber Copper with silver plating Silver alloy plus copper with silver plating Silver alloy plus copper with silver plating Copper with tin plating for solder lug & wire lead; brass with silver plating for screw lug Heat resistant polyvinyl chloride (Leads are AWG 16)
Slides
Rotaries
Environmental Data
Tactiles
Operating Temp Range: Humidity: Vibration: Shock: Front Panel Seal: Behind Panel Seal:
30C through +70C (22F through +158F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) IP67 of IEC60529, dust tight & water protected during temporary immersion for all models; optional toggle boot AT401 for additional protection (details at end of WT section) IP60 of IEC60529, dust tight but not water protected for solder lug & screw terminal models IP67 of IEC60529, dust tight & water protected during temporary immersion for wire lead models
Touch
Tilt
Installation
Indicators
Supplement
Accessories
UL94V-0 outer case UL AWM 1015 Recognized at Flammability VW-1; Temperature Range 20C ~ +105C; Maximum Load 600V; AWG 16. CSA TEW 105 Certified at Temperature Range 20C ~ +105C; Maximum Load 600V
A124
www.nkk.com
Series WT
A
Toggles Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers
Distinctive Characteristics
Sealing for wire lead models meets IP67 of IEC60529 Standards at front and back panel. Sealing for solder lug or screw lug models meets IP67 at front panel and IP60 at back panel.
Single unit construction of bushing and case gives added protection from environmental elements.
Epoxy sealed base covered by outer case doubles protection from dust and water (not operable under water or oil).
Specially designed contact mechanism that breaks light contact welds for circuits 11, 12, 21 and 22.
Interlocked movable contact mechanism provides highly reliable switching by minimizing contact bounce over center contact.
Actual Size
Heat resistant resin used for outer housing meets UL94V-0 flammability standard and provides high arc and tracking resistance.
www.nkk.com
A125
Series WT
Toggles
Pushbuttons
Rockers
WT
Poles
1 2 SPST SPDT DPST DPDT 1 2 3 5 8 9 (
2
Circuits
ON ON ON ON (ON) ON NONE NONE OFF NONE OFF OFF OFF ON ON (ON) (ON) (ON)
2
S T L
S
Terminals
Solder Lug* Screw Lug Wire Lead
Programmable Illuminated PB
) = Momentary
WT22S
Rotaries
Slides
Tactiles
Throw & Schematics Terminal numbers are not actually on wire lead models.
1a (COM) 1b
Tilt
Pole
Model
Flat
Touch
SP
WT11 WT12 WT13 WT15 WT18 WT19 WT21 WT22 WT23 WT25 WT28 WT29
ON ON ON ON (ON) ON ON ON ON ON (ON) ON
NONE NONE OFF NONE OFF OFF NONE NONE OFF NONE OFF OFF
1a-1b
OPEN
OPEN
SPST
Indicators
SP
1-1b
OPEN
1-1a
SPDT
1a
1 (COM) 1b
Accessories
DP
1a-1b 2a-2b
OPEN
OPEN
DPST
1a (COM) 1b
2a 2b
Supplement
DP
1-1b 2-2b
OPEN
1-1a 2-2a
DPDT
1a
(COM) 1b 2a
2 2b
A126
www.nkk.com
Series WT
A
Single Throw Solder Lug
Rockers
2b 1b
Flatted
1b 1
24 (11.2) Typ .441 (5.7) Dia .224 M12 P1 (1.0) .039 (17.5) .689 (9.6) .378 (27.1) 1.067 (4.8) .189
(28.8) 1.134
2 1
(28.8) 1.134
1a
2a 1a
(4.8) .189
Single Pole
Double Pole
WT11S
Flatted
(2.4) Dia Typ .094 24 (11.2) Typ .441 (5.7) Dia .224 M12 P1 (1.0) .039 (17.5) .689 (9.6) .378 (27.1) 1.067 (4.8) .189
1b 1 1a
(28.8) 1.134
2 1
(28.8) 1.134
2a 1a
(4.8) .189
Single Pole
Double Pole
M3.5 x 5 Flatted
24
1 1a
(28.8) 1.134
2 1
(28.8) 1.134
(30.6) 1.205
(19.4) .764
Supplement
Single Pole
Double Pole
Accessories
(1.0) .039
2a 1a
(6.6) .260
Indicators
1b
Tilt
WT22S
Tactiles
Slides
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Toggles
Series WT
Toggles
A
Double Throw Screw Lug
Rockers
Pushbuttons
M3.5 x 5 Flatted
2b 1b
1b
24
(6.6) .260
1 1a
(28.8) 1.134
2 1
(28.8) 1.134
Programmable Illuminated PB
2a 1a
M12 P1 (1.0) .039 (17.5) .689 (9.6) .378 (30.6) 1.205 (8.3) .327
Double Pole
Rotaries
Keylocks
Flatted
Slides
1b
1b
2b
24
(30.2) 1.189
(30.2) 1.189
1a
1a
2a
Tactiles
(20.8) .819
(20.8) .819
Single Pole
Tilt
Double Pole
WT22L
Touch
Indicators
1 Black Black
2a
2b
Accessories
Yellow Green
Supplement
A128
www.nkk.com
Series WT
A
With Standard Hardware: .157 (4.0mm) With optional Boot Assembly AT401A/H/S: .063 (1.6mm) With optional Boot Assembly AT4181: .083 (2.1mm)
Toggles Supplement Accessories Indicators Touch
(8.0) Dia .315 (13.8) Dia .543 (21.5) Dia .846 Boot O-ring Panel (24.3) .957 (18.6) .732 (21.5) Dia .846 (1.0) .039 (12.1) Dia .476 (14.8) .583 M12 P1
AT503M Hex Face Nut Material: Brass with Chrome Plating 1 supplied with each switch
M12 P1
AT508 Internal Tooth Lockwasher Material: Steel with Zinc/Chromate 1 supplied with each switch
(12.1) .476
AT401P O-ring Material: Nitrile butadiene rubber 1 supplied with each switch
(14.3) .563
(13.8) Dia .543 (16.0) .630 (2.4) .094 (1.0) .039 (0.5) .020 (1.5) .059
OPTIONAL ACCESSORIES
Boot Assemblies for High Particulate Contamination Applications AT401A for Oil Resistance Boot Material: Black nitrile butadiene rubber Hex Nut Material & Finish: Nickel plated brass O-ring Material: Nitrile butadiene rubber
(17.5) Dia .689 (17.0) Dia .669 (16.0) Dia .630 (10.0) .394 (10.0) (11.7) .394 .461 (13.2) .520 (3.5) ~ (5.5) .138 .217 (1.6) Max .063 Boot Hex Nut O-ring Panel O-ring (12.1) Dia .476 (17.5) Dia .689 (11.7) .461 (17.0) .669 (1.5) .059
Boot Material: Gray ethylene propylene rubber Hex Nut Material & Finish: Nickel plated brass O-ring Material: Nitrile butadiene rubber
(16.0) Dia .630
Hex Nut Material & Finish: Nickel plated brass O-ring Material: Nitrile butadiene rubber
Boot
M12 P1
Hex Nut
O-ring
AT4181 Splashproof Boot Assembly Boot Material: Black Silicon rubber Nut Material & Finish: Nickel plated brass O-ring Material: Nitrile butadiene rubber
(1.0) .039 (2.1) .083 (18.6) .732 (24.3) .957 (14.8) .583
O-ring
Note: When using boot assemblies AT401A/H/S or AT4181, also use o-ring AT401P from the standard hardware supplied. Hex face nut AT503M and lockwasher AT508 are not used with these boot assemblies.
www.nkk.com
O-ring
A129
Rotaries
AT401S for Retention of Flexibility, Resilience & Tensile Strength Over Wide Temperature Range
Keylocks
Programmable Illuminated PB
Pushbuttons
STANDARD HARDWARE
Rockers