Sunteți pe pagina 1din 156

FILE NO.

810-200822GR

SERVICE MANUAL

19/22-inch Diagonal LCD TV/DVD COMBINATION

19LV505 19LV506 22LV505

The above models are classified as green products (*1), as indicated by the underlined serial numbers. This Service Manual describes replacement parts for the green products. When repairing these green product(s), use the part(s) described in this manual and lead-free solder (*2). For (*1) and (*2), see the next page.
2008 Toshiba Corporation

DOCUMENT CREATED IN JAPAN, March, 2008 GREEN

(*1)

GREEN PRODUCT PROCUREMENT

The EC is actively promoting the WEEE & RoHS Directives that define standards for recycling and reuse of Waste Electrical and Electronic Equipment and for the Restriction of the use of certain Hazardous Substances. From July 1, 2006, the RoHS Directive will prohibit any marketing of new products containing the restricted substances. Increasing attention is given to issues related to the global environmental. Toshiba Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts. Green procurement of parts is not only confined to manufacture. The same green parts used in manufacture must also be used as replacement parts.

(*2)

LEAD-FREE SOLDER

This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product.

WARNING
This product is manufactured using lead free solder.

DO NOT USE LEAD BASED SOLDER TO REPAIR THIS PRODUCT !


The melting temperature of lead-free solder is higher than that of leaded solder by 86F to 104F (30C to 40C). Use of a soldering iron designed for lead-based solders to repair product made with lead-free solder may result in damage to the component and or PCB being soldered. Great care should be made to ensure high-quality soldering when servicing this product especially when soldering large components, through-hole pins, and on PCBs as the level of heat required to melt lead-free solder is high.

19LV505/19LV506/22LV505

How to Obtain Warranty Services If, after following all of the operating instructions in this manual and checking the section Troubleshooting, you nd that service is needed: (1) For instructions on how to obtain warranty service for your LCD TV/DVD Combination, contact TACP Consumer Solution Center toll s free at 1-800-631-3811. (2) You must include a copy or original bill of sale or other proof of purchase along with the entire LCD TV/DVD Combination to the Depot Warranty Repair Center specied by the TACP Consumer Solutions Center. You are responsible for all inbound transportation and insurance charges for the LCD TV/DVD Combination to the Depot Warranty Repair Center specied by the TACP Consumer Solutions Center. For additional information, visit TACP website: s www.tacp.toshiba.com ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY USE, MISUSE OR INABILITY TO USE THIS LCD TV/DVD COMBINATION).

No person, agent, distributor, dealer, or company is authorized to change, modify, or extend the terms of these warranties in any manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP arising under the warranty or under any statute or law of the United States or any state thereof is hereby limited to ninety (90) days from the date you discover, or should have discovered, the defect. This limitation does not apply to implied warranties arising under state law. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, WHEN AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.

Introduction

Connections

14

19/22-inch Diagonal LCD TV/DVD COMBINATION


*

Basic setup

21

TV operation

26

19LV505 19LV506 22LV505


OWNERS MANUAL

Basic playback

44

Advanced playback

47

Function setup

60

Others

66

ColorStream is registered trademark of Toshiba America Consumer Products, L.L.C.

IIIustration of 19LV505

J50S0101A SH 08/02 N

Printed in Thailand

2008 Toshiba Corporation Before operating the unit, please read this manual thoroughly. *Screen size is approximate.

Owner Record s The model number and serial number are on the back of your TV/DVD. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV/DVD. Model number: Serial number:

J50S0101A P66-Back.indd 72

1/22/08 1:46:49 PM

J50S0101A.indb 1

1/19/08 2:40:38 PM

Introduction

Dear Customer,
Thank you for purchasing this Toshiba LCD TV or TV/DVD Combination television. This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV or TV/DVD Combination, please read this manual completely, and keep it nearby for future reference.

NOTE TO CATV INSTALLERS


This is a reminder to call the CATV system installers attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see item 26 on page 5.

FCC compliance information


CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

FCC Declaration of Conformity Compliance Statement (Part 15):


The Toshiba 19LV505, 19LV506, 22LV505, LCD TV/DVD Combination complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The party responsible for compliance to these rules is: Toshiba America Consumer Products, L.L.C. 82 Totowa Rd. Wayne, NJ 07470. Ph: (800) 631-3811 or visit TACP website at www.tacp.Toshiba.com s NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications to this equipment not expressly approved by Toshiba could void the user authority to operate this s equipment.

Introduction

Safety Precautions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Child Safety
It Makes A Difference Where Your TV Stands
Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:

WARNING
R I S K OF E LECTR IC S HOCK DO NOT OPEN

The Issue
If you are like most consumers, you have a TV in your home. Many homes, in fact, have more than one TV. The home theater entertainment experience is a growing trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands. Sometimes TVs are improperly secured or inappropriately situated on dressers, bookcases, shelves, desks, audio speakers, chests, or carts. As a result, TVs may fall over, causing unnecessary injury.

CAUTION: TO REDUCE THE RISK OF ELECTRIC


SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Toshiba Cares!
The consumer electronics industry is committed to making home entertainment enjoyable and safe. The Consumer Electronics Association formed the Home Entertainment Support Safety Committee, comprised of TV and consumer electronics furniture manufacturers, to advocate childrens safety and educate consumers and their families about television safety.

CAUTION:

To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

Tune Into Safety


One size does NOT fit all! Use appropriate furniture large enough to support the weight of your TV (and other electronic components). Use appropriate angle braces, straps, and anchors to secure your furniture to the wall (but never screw anything directly into the TV). Carefully read and understand the other enclosed instructions for proper use of this product. Do not allow children to climb on or play with furniture and TVs. Avoid placing any item on top of your TV (such as a VCR, remote control, or toy) that a curious child may reach for. Remember that children can become excited while watching a program and can potentially push or pull a TV over. Share our safety message about this hidden hazard of the home with your family and friends. Thank you!
2500 Wilson Blvd. Arlington, VA 22201 U.S.A. www.CE.org CEA is the Sponsor, Producer and Manager of the International CES

WARNING: If you decide to wall mount this television, always use a UL Listed wall bracket appropriate for the size and weight of this television. The use of any wall bracket other than a UL Listed wall bracket appropriate for the size and weight of this television for wall mounting this television could result in serious bodily injury and/or property damage. See Choosing a location for your LCD TV (Pg.6).
ENERGY STAR qualified TV. Products that earn the ENERGY STAR prevent green house gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and the U.S. Department of Energy. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.

CAUTION: THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. TO PREVENT DIRECT EXPOSURE TO LASER BEAM, NEVER OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. NEVER STARE INTO BEAM.

Location of the required Marking The rating sheet and the safety caution are the rear of the unit.

Illustration of 19LV505

CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

ON DISPOSAL
The lamp(s) inside this product contain mercury. Disposal may be regulated due to environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance (www.eiae.org).

2
J50S0101A.indb 2 1/19/08 2:40:58 PM J50S0101A.indb 3

3
1/19/08 2:41:00 PM

Introduction

SAFETY INSTRUCTIONS
Important Safety Instructions
1) 2) 3) 4) 5) 6) 7) 8) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer instructions. s Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong Wide plug are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

SAFETY INSTRUCTIONS (Continued)


Installation (cont. from previous page)
26) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code.)
Antenna lead-in wire Ground clamp Electric service equipment Power service grounding electrode system (NEC Art 250 Part H) Antenna discharge unit (NEC Section 810-20) Grounding conductors (NEC Section 810-21) Ground clamps

Installation, Care, and Service


Installation Follow these recommendations and precautions and heed all warnings when installing your TV: 15) To avoid damage to this product, never place or store the TV in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration. 16) Never modify this equipment. Changes or modications may void: a) the warranty, and b) the user authority to s operate this equipment under the rules of the Federal Communications Commission. 17) DANGER: RISK OF SERIOUS PERSONAL INJURY, DEATH, OR EQUIPMENT DAMAGE! Never place the TV on an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

32) During normal use, the TV may make occasional snap ping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center.

Introduction

Care (cont. from previous column)


33) Keep your ngers well clear of the disc slot as it is closing. Failure to do so may cause serious personal injury. 34) When you use headphones, keep the volume at a moderate level. Using headphones continuously at a high volume may cause hearing damage. 35) NEVER look directly into the disc slot or ventilation slots at the source of the laser beam. Doing so may cause sight damage. 36) NEVER use a cracked, deformed, or repaired disc. Such discs are easily broken and may cause serious personal injury or product damage. SUCH DAMAGE IS NOT COVERED UNDER YOUR WARRANTY. 37) WARNING: RISK OF SERIOUS PERSONAL INJURY OR EQUIPMENT DAMAGE! Never strike the screen with a sharp or heavy object. Never touch, press, or place anything on the LCD screen. These actions will damage the LCD screen If you need to clean the LCD screen, follow the instructions in item 28 on this page.

9)

27)

18) Never place items such as vases, aquariums, or candles on top of the TV. 19) WARNING: Always place the TV on the oor or a sturdy, level, stable Sturdy tie (as short as possible; min. 4 in.) surface that can Clip support the weight of the unit. To secure Hooks the TV, use a sturdy Screw strap from the hooks on the rear of the TV Band pedestal to a wall TV top TV side stud, pillar or other immovable structure. Make sure the strap is tight, secure, and parallel to the oor. 20) Never expose the apparatus to dripping or splashing liquid or place items such as vases, aquariums, any other item lled with liquid, or candles on top of the TV. 21) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV: on a bed, sofa, rug, or similar surface; too close to drapes, curtains, or walls; or in a conned space such as a bookcase, built-in cabinet, or any other place with poor ventilation. The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV. Leave a space of at least 4 inches around the TV. 22) Always place the back of the television at least four (4) inches away from any vertical surface (such as a wall) to allow proper ventilation. 23) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse. 24) Never overload wall outlets and extension cords. 25) Always operate the TV with a 120V AC, 60Hz power source only.
CAUTION: To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely with three-wire grounding type to prevent blade exposure.

10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specied by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

DANGER: RISK OF SERIOUS PERSONAL INJURY OR DEATH! Use extreme care to make sure you are never in a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits. Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

Care
For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions: 28) Always unplug the TV before cleaning. Wipe the display panel surface gently using only a soft cloth (supplied.) A hard cloth may damage the surface of the panel. Avoid contact with alcohol, thinner, benzene, acidic or and alkaline solvent cleaners, abrasive cleaners, or chemical cloths, which may damage the surface. Never spray volatile compounds such as insecticide on the cabinet. Such products may damage or discolor the cabinet. 29) WARNING: RISK OF ELECTRIC SHOCK! Never spill liquids or push objects of any kind into the TV cabinet slots.

Service
38) WARNING: RISK OF ELECTRIC SHOCK! Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may result in death or serious injury. Refer all servicing to a Toshiba Authorized Service Center.

Additional Safety Precautions

39) If you have the TV serviced: Ask the service technician to use only replacement parts specied by the manufacturer. Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition. 40) When the TV reaches the end of its useful life, ask a qualied service technician to properly dispose of the TV.

14a) CAUTION: If the TV is dropped and the cabinet or enclosure surface has been damaged or the TV does not operate normally, take the following precautions: ALWAYS turn off the TV and unplug the power cord to avoid possible electric shock or re. NEVER allow your body to come in contact with any broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a toxic liquid. If the liquid comes in contact with your mouth or eyes, or your skin is cut by broken glass, rinse the affected area thoroughly with water and consult your doctor. ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped. 14b) WARNING: To prevent the spread of re, keep candles or other open ames away from this product at all times.

30) While it is thundering, do not touch the connecting cables or apparatus. 31) For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

4
J50S0101A.indb 4 1/19/08 2:41:02 PM J50S0101A.indb 5

5
1/19/08 2:41:04 PM

Introduction

Precautions
Choosing a location for your LCD TV
Retractable pedestal stand and locating the LCD TV Observe the following safety precautions: 1) Ensure that unpacking and transfer of the unit is carried out by two or more people. 2) Put the LCD TV on a large level area in a recumbent posture. 3) Grab the pedestal stand and lift the display up. Conrm the pivot is locked. 4) Place the TV on a sturdy, level surface that can support the weight of the TV. 5) Be sure to secure the TV to a wall stud, pillar, surface, or other immovable structure. To secure the TV in this manner: (1) attach a clip to an immovable structure, then (2) pass a sturdy strap through the clip and attach each end to the hooks located at the back of the TV. Be sure to leave at least 4 inches between the TV and the wall or similar structure for ventilation. See item 19, page 4 for additional details. To fold the pedestal stand 1) Slide the lever on the back side of the pedestal stand to the left. 2) Lay the display down. Slide the lever to the left

Precautions (Continued)/Notes on discs


Important notes about your LCD TV
The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction; therefore, Toshiba is not responsible for perceived defects resulting from these symptoms. 1) An after image (ghost) may appear on the screen if a xed, non-moving image is displayed for a long period of time. The after image is not permanent and will disappear in a short period of time. 2) The LCD panel contained in this TV is manufactured using an extremely high level of precision technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does not light, remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance. Note: Interactive video games that involve shooting a gun type of joystick at an on-screen target may not work on this TV.

Notes on moisture condensation


Moisture condensation damages the unit. Please read the following carefully. Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day and drops of water form on the outside of the glass. In the same way, moisture may condense on this unit internal optical s pick-up lens, one of the most crucial internal parts of the unit.
le of mo Examp ensat isture ion! cond

On handling discs
Do not touch the playback side of the disc. For example, handle the disc so that it is shown in gure below.

Introduction

Do not attach paper or tape to discs.

Playback side

Optical pick-up lens

On cleaning discs
Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.

Notes on handling
Do not subject the LCD panel to physical shock, such as dropping it. It may cause unit damage and malfunction. When shipping the unit, the original shipping carton and packing materials come in handy. For fully protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insecticide, near the unit. Do not leave rubber or plastic products in contact with the unit for prolonged periods of time. Doing so will leave marks on the nish. The top and rear panels of the unit may become warm after a long period of use. This is not a malfunction. When the unit is not in use, always remove the disc and turn off the power.

Moisture condensation may occur in the following situations: When you move the unit from a cold area to a warm area. When you use the unit in a room in which the heat was just turned on. When you use the unit in an area where cold air from an air conditioner directly hits the unit. When you use the unit in a humid area.

Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray for vinyl LPs. It may damage the disc.

Back side of the pedestal stand NOTE: Do not operate the LCD TV while the pedestal stand is folded. To Display your LCD TV using a Wall Bracket: If you decide to wall mount your LCD TV, always use a UL Listed wall bracket appropriate for the size and weight of the LCD TV (see page 2): 1) CAUTION: Two people are required for installation. 2) Unplug and remove any cables and/or other component connectors from the rear of the TV. 3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket. 4) After attaching the appropriate bracket(s) to the wall and the back of the TV, remove the pedestal stand from the TV as described below. Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a at, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel. 2) Remove the two screws shown in the diagram below. This will allow removal of the pedestal stand. 3) Once you have removed all two screws holding the pedestal stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV.

On storing discs
Do not store discs in a place subject to direct sunlight or near heat sources. Do not store discs in places subject to moisture and dust such as a bathroom or near a humidier. Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.

Notes on locating the unit


When you place this unit near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, place the unit away from the TV, radio, or VCR. To avoid damage to this product, never place or store the TV/DVD in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration.

Structure of disc contents


Never use the unit when moisture condensation may occur Using the unit when moisture condensation exists may damage discs and internal parts. Connect the power cord of the unit to the wall outlet, turn on the unit, remove the disc, and leave it for two or three hours. After two or three hours, the unit will have warmed up and evaporated any moisture. Leaving the TV connected to the wall outlet will help prevent moisture condensation in the TV or DVD Player.
Wa it!

Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks. DVD video disc
DVD video disc Title 1
Chapter 1 Chapter 2 Chapter 1

Title 2
Chapter 2 Chapter 3

Video CD/Audio CD
Video CD/Audio CD
Track 1 Track 2 Track 3 Track 4 Track 5

Wall outlet

Two screws

6
J50S0101A.indb 6 1/19/08 2:41:05 PM J50S0101A.indb 7

Each title, chapter or track is assigned a number, which is called title number, chapter number or track number respectively. There may be discs that do not have these numbers.

1/19/08 2:41:08 PM

Introduction

Notes on discs (Continued)


Notes on copyright
The unauthorized recording, use, distribution, or revision of copyrighted materials including, without limitation, television programs, videotapes, and DVDs, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Contents
Playable discs
This unit can play the following discs.
Disc Mark Contents Disc Size Maximum playback time Approx. 4 hours (single sided disc) Approx. 8 hours (double sided disc) Approx. 80 minutes (single sided disc) Approx. 160 minutes (double sided disc) Approx. 74 minutes (single sided disc) Approx. 20 minutes (single sided disc) Approx. 74 minutes (single sided disc) Approx. 20 minutes (single sided disc)

Introduction
SAFETY INSTRUCTIONS................................ 4 Precautions....................................................... 6 Notes on discs .................................................. 7 Contents ........................................................... 9 Identication of controls ..................................10

Basic playback
Playing a disc ................................................. 44
Introduction

Advanced playback
Zooming.......................................................... 47 Locating desired scene................................... 47 Marking desired scenes.................................. 48 Repeat playback ............................................. 49 A-B Repeat playback ...................................... 49 Program playback........................................... 50 Random playback ........................................... 50 Changing angles..............................................51 Title selection ...................................................51 DVD menu .......................................................51 Changing soundtrack language .......................52 Subtitles ...........................................................52 Disc status .......................................................53 To turn off the PBC ..........................................53 MP3/WMA/JPEG/DivX and Audio CD operation ..................................54 Repeat, random and program playback using le browser.............................................58

About this owner manual s


This owner manual explains the basic instructions of this s unit. Some DVD video discs are produced in a manner that allows specic or limited operation during playback. As such, the unit may not respond to all operating command. This is not a defect in the unit. Refer to instruction notes of discs. The following symbol may appear on the TV screen during operation. It means that the operation is not permitted by the TV/DVD or the disc. For example, sometimes it is unable to stop the playback of copyright message of the disc when the STOP ( ) button is pressed. Alternatively, this symbol may also indicate that the feature is not available for the disc.

DVD video discs

Audio + Video (moving pictures)

12 cm

Connections
Antenna connections ...................................... 14 Cable TV connections .................................... 15 Connecting to optional equipment .................. 16 Power source.................................................. 20

8 cm

Video CDs
DIGITAL VIDEO

Audio + Video (moving pictures)

12 cm

8 cm 12 cm

Basic setup
Auto setup ...................................................... 21 Setting the language....................................... 22 To memorize channels.................................... 23

Audio CDs

Audio 8 cm Audio + Video (moving pictures) 12 cm

TV operation
It depends on DivX quality

DivX

8 cm

Notes on region numbers


The region number of this unit is 1. If region numbers, which stand for their playable area, are printed on your DVD video disc and you do not nd 1 or ALL , disc playback will not be allowed by the player. (In this case, the unit will display a message on-screen.) Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable.

The following discs are also available. DVD-R/RW discs of DVD video format CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA, JPEG or DivX format Kodak Picture CD and FUJICOLOR CD format Some of these discs may be incompatible.

On Video CDs
This unit supports Video CDs equipped with the PBC (Version 2.0) function. (PBC is the abbreviation of Playback Control.) You can enjoy two playback variations depending on types of discs. Video CD not equipped with PBC function (Version 1.1) Sound and movie can be played on this unit in the same way as a DVD. Video CD equipped with PBC function (Version 2.0) In addition to operation of a Video CD not equipped with the PBC function, you can enjoy playback of interactive software with search function by using the menu displayed on the TV screen (Menu Playback). Some of the functions described in this owner manual may not s work with some discs.

You cannot play discs other than those listed above. You cannot play discs of DVD-RAM, DVD-ROM, CDROM, Photo CD, etc., or non standardized discs even if they may be labeled as above. Some CD-R/RWs cannot be played back depending on the recording conditions. This unit uses the NTSC color system, and cannot play DVD video discs recorded in any other color system (PAL, SECAM, etc.). This unit can play an 8cm disc. Please do not use a disc adapter. It may cause trouble. Please do not insert any disc of an irregular shape into the unit, as it may interfere with the function of the unit. You may not be able to remove it. Please do not use after market accessories, such as a ring protector, as this may cause trouble with the operation of the unit. Because of problems and errors that can occur during the creation of DVD and CD Software and/or the manufacture of DVD and CD discs, Toshiba cannot assure that the DVD player contained in this TV will successfully play every disc bearing the DVD and CD logos. If you happen to experience any difculty playing a DVD and/or CD disc on the DVD player contained in this TV, please contact Toshiba Customer Service. is a trademark of DVD Format/Logo Licensing Corporation.

TV operation ................................................... 26 Labeling channels........................................... 28 Labeling video inputs ...................................... 29 Setting the V-Chip........................................... 30 Setting the closed captions............................. 34 CC advanced .................................................. 35 Adjusting the picture preference ..................... 36 Picture settings ............................................... 36 Viewing the wide-screen picture formats ........ 37 Film Mode ....................................................... 38 DNR ................................................................ 38 Picture control adjustment in the PC mode .... 39 Sound control adjustment ............................... 40 Selecting Stereo/Second Audio Program (SAP) .... 40 Selecting the audio language ......................... 41 Selecting the HDMI audio input source .......... 41 Using the aspect feature................................. 42 Adjusting the back lighting .............................. 42 Setting the Auto Shut Off ................................ 43 Resetting your settings ................................... 43

Function setup
Customizing the function settings ....................60 Temporary cancel the rating level by DVD disc .....................................................65

Others
Understanding the Power Return feature ........66 Troubleshooting ...............................................66 Reception disturbances ...................................68 Language code list ..........................................69 Specications ..................................................70 Limited United States Warranty .......................71

8
J50S0101A.indb 8 1/19/08 2:41:09 PM J50S0101A.indb 9

9
1/19/08 2:41:10 PM

Introduction

Identification of controls

Introduction

Front

Rear

Speaker

Remote sensor

13 21

POWER indicator

Illustration of 19LV505

Side
Left Side Adjusting the angle of the base
Approx. 10 Approx. 3

EJECT button 45
Disc slot 44

VOLUME (+/) buttons 26 CHANNEL 26 PLAY button 44 CHANNEL 26 STOP button 44 MENU button 22 60 INPUT/ENTER button 16 POWER button 21 Illustration of 19LV505 Illustration of 19LV505 Antenna jack 14 15
You can adjust the angle of the TV-screen for 3 forward or for 10 backward from vertical angle. Hold the base of the TV while adjusting the angle.

AC INPUT 20 HEAD PHONE jack 27 COLORSTREAM HD IN jacks 17 VIDEO/GAME IN jack 16 17

COAXIAL DIGITAL AUDIO OUT jack 18 19 HDMI IN jack 19 PC AUDIO IN jack 20 PC MONITOR IN jack 20

10
J50S0101A.indb 10 1/19/08 2:41:10 PM J50S0101A.indb 11

11
1/19/08 2:41:12 PM

Introduction

Identification of controls (Continued)

Introduction

Remote control
The instructions in this manual describe the function on the remote control See the page in for details

Inserting batteries

Open the battery compartment cover in the direction of the arrow

Insta l two R03/AAA batteries (supplied), paying attention to the polarity indicated in the battery compartment

Replace the compartment cover

EJECT button 45 TV/DVD button 44 Direct channel selection buttons (0 9) 26 Numbered buttons (0 9) 30

POWER button 21 SLEEP button 27

DISPLAY button 27 53 CH / button 26 SUBTITLE button 52 INPUT button 16 ZOOM button 47 PLAY MODE button 49 50 53 PLAY button 44 MENU button 22 SETUP button 60 PAUSE button CH RTN button SKIP ( ) button REV button FF button SLOW ( ) button TOP MENU button RETURN button 55
45 27 46 46 46 46 51 60

JUMP button 47 Direct channel selection button ( AUDIO SELECT button 52 VOL +/ button 26 MUTE button 27 *DVD MENU button 51 ENTER button 21 Direction buttons ( / / / ) 21 EXIT/CANCEL button 21 STOP button 44 CLOSED CAPTION button 34 SKIP ( button 46 SLOW ( ) button 46 MARKER button 48 ANGLE button 51 REPEAT A B button 49 PIC SIZE button 37

) 26

Operation
Aim the remote control at the remote sensor and press control buttons to operate Operate the remote control with n 30 angle on either s de of the remote sensor, up to a distance of approx 5 meters

Approx 5 meters

GAME button 16

Caution: Never throw batteries into a re


SE-R0305

Note: Be sure to use AAA size batteries


Dispose of batteries in a designated disposal area Batteries should always be disposed of w th the environment in mind Always d spose of batteries in accordance with applicable laws and regulations If the remote control does not operate correctly, or f the operating range becomes reduced, replace batteries with new ones When necessary to replace batteries in the remote control, always replace both batter es with new ones Never mix battery types or use new and used batteries in combination Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time This will prevent battery acid from leaking into the battery compartment

*DVD MENU button Use the DVD MENU button to display the menu included on many DVD video discs To operate a menu, follow the instructions in DVD menu 51

Illustration of 19LV505

12

13

Connections

Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system If you are using a cable TV service (CABLE), see page 15 for Cable TV connections

Cable TV connections
This TV/DVD has an extended tuning range and can tune most cable channels w thout using a Cable TV converter box Some cable companies offer premium pay channels in which the signal is scrambled Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company

Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

For subscribers to basic cable TV service


Antenna jack For basic cable service not requiring a converter/descrambler box, connect the Cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the TV/DVD

Antenna jack

Antenna jack

Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack on the back of the TV/DVD If your combination VHF/UHF antenna has a 300 ohm twin lead wire, use the 300 75 ohm matching transformer (not supplied) 75 ohm coaxial cable

Connections

75 ohm coaxial cable (not supplied) 300 75 ohm matching transformer (not supplied)

For subscribers to scrambled cable TV service


If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the incoming 75 ohm coaxial cable to the converter/descrambler box Using another 75 ohm coaxial cable, connect the output jack of the converter/descrambler box to the antenna jack on the TV/DVD Follow the connections shown below Set the TV/DVD to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to select channels

Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)
Connect the UHF 300 ohm twin lead w re to the combiner (not supplied) Connect the VHF 300 ohm twin lead wire to the 300 75 ohm matching transformer (not supplied) Attach the transformer to the combiner, then attach the combiner to the antenna jack on the back of the TV/DVD

Antenna jack

300 75 ohm matching transformer (not supplied)

Incoming 75 ohm Cable TV

Converter/ descrambler

75 ohm cable to TV/DVD

Antenna jack

Combiner (not supplied) UHF 300 ohm twin lead wire (not supplied) VHF 300 ohm twin lead wire (not supplied)

For subscribers to unscrambled basic cable TV service with scrambled premium channels
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the cable company or an electronics supply store) Follow the connections shown below With the switch in the B position, you can directly tune any nonscrambled channels on your TV/DVD With the switch in the A position, tune your TV/DVD to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels

Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Connect the VHF 75 ohm cable and UHF 300 ohm twin lead wire to the combiner (not supplied) Attach the combiner to the antenna jack on the back of the TV/DVD
VHF 75 ohm (not supp ied) Combiner (not supplied) UHF 300 ohm twin lead wire (not supplied)

Antenna jack

Incoming 75 ohm Cable TV

Converter/ descrambler

Splitter

A/B switch

75 ohm cable to TV/DVD B

Antenna jack

14

15

Connections

Connecting to optional equipment


You can enjoy VCR, camcorder or TV game with connection to external input.

0-5 CH / INPUT GAME

Using the audio/video inputs


Press INPUT to view a signal from another device connected to your TV/DVD, such as a VCR player. You can select TV, Video, ColorStream HD, HDMI or PC depending on which input jacks you used to connect your devices. Press INPUT on the remote control to display the current signal source. To change the input source, press INPUT again or press 0-4. (5 is for selection DVD mode.)
Source Selection 0.TV 1.Video 2.ColorStream HD 3.HDMI 4.PC 5.DVD

Connecting to an optional equipment with S-video output


If you connect a VCR with an S-Video cable to the S-VIDEO IN jack on the left side of the TV/DVD, you must also connect the audio cables to the AUDIO IN jacks as shown below. The S-Video cable only carries the video signal. The audio signal is separated. Select the Video by pressing INPUT repeatedly.
To S-VIDEO IN (white)

Connections

[0-5]:Select

Back side

Connecting to a VCR
To playback from the VCR, connect the VCR to the TV/DVD as shown. Select the Video by pressing INPUT repeatedly. (yellow) VCR : Signal ow
(white) (red) To VIDEO/GAME IN
To Audio/Video OUT

: Signal ow

Ex. VCR with S-Video

To AUDIO (L/R) IN

(playback) Back side


To S-VIDEO OUT To Audio (L/R) OUT S-Video cable (not supplied) Audio cable (not supplied) (red) To VIDEO/GAME IN

Audio/Video cable (not supplied)

Connecting to a camcorder
To playback from the camcorder, connect the camcorder to the TV/DVD as shown. Select the Video by pressing INPUT repeatedly. : Signal ow Camcorder
(yellow) (white) (red)
To Audio/Video OUT

Note: When the S-Video cable and the standard video cable are connected at the same time, the S-video cable takes precedence.

Connecting an optional equipment with ColorStream (Component video) output


Your TV/DVD is capable of using ColorStream (component video). Connecting your TV/DVD to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream can greatly enhance picture quality and performance. Select the ColorStream HD by pressing INPUT repeatedly.
Ex. DVD player with Component video Back side

Back side

To VIDEO/GAME IN

Audio/Video cable (not supplied)

: Signal ow

To COLORSTREAM HD (Y, PB, PR) IN

Connecting to a TV Game
You can enjoy playing a TV game on the screen by adjusting to the suitable brightness for your eyes. 1. Connect a TV Game to the TV/DVD. 2. Select the Game mode by pressing GAME. The Game mode screen appears. If GAME is pressed during standby mode, the unit turns on automatically and the Game mode screen appears on the screen. (yellow) : Signal ow Back side
(white)
To Audio/Video OUT

To Audio (L/R) OUT

To Component Video OUT Component video cable (not supplied)

(white)

(red) To COLORSTREAM HD AUDIO (L/R) IN

Audio cable (not supplied)

(red)

To VIDEO/GAME IN

When using the Component video cable, an Audio cable must be connected to COLORSTREAM HD AUDIO(L/R) IN jacks. Note: The ColorStream (component video) inputs on this unit are for use with devices that output 480i, 1080i interlaced signals and 480p, 720p progressive signals. Refer to the owner manual of the connected equipment as well. s When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from the tuner and radio.

Audio/Video cable (not supplied)

Note: You can also change the TV/DVD screen to the desired mode by pressing the CH / . The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different types of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. Youl need to consult each component Owner Manual l s s for additional information. Interactive video games that involve shooting a gun type of joystick at on-screen target may not work on this TV/DVD.

16
J50S0101A.indb 16 1/19/08 2:41:17 PM J50S0101A.indb 17

17
1/19/08 2:41:19 PM

Connections

Connecting to optional equipment (Continued)


You can enjoy high quality dynamic sounds by connecting the TV/DVD to optional audio equipment. * This section uses the following reference mark.

: Front speaker : Rear speaker : Sub woofer

: Center speaker : Signal ow

Connecting to an amplier equipped with a Dolby Digital decoder


Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benet of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. Back side
Amplier equipped with a Dolby Digital decoder To COAXIAL type digital audio input 75 coaxial cable (not supplied) To COAXIAL DIGITAL AUDIO OUT

Connecting to an amplier equipped with a digital audio input


2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplier equipped with a digital audio input and speaker system (right and left front speakers). Note: PCM audio is limited to DVD or CD playback.

Connections

Back side

Amplier equipped with a Digital audio input To COAXIAL type digital audio input

To COAXIAL DIGITAL AUDIO OUT

75 coaxial cable (not supplied)


Note: DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD. Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the COAXIAL input of a Receiver or Processor. Refer to the owner manual of the connected equipment as well. s When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. s The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound. Turn off the amplier before you connect or disconnect the TV/DVD power cord. If you leave the amplier power on, the speakers s s may be damaged.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Connecting to an amplier equipped with a DTS decoder


Digital Theater Systems (DTS) DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benet of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs. Back side
Amplier equipped with a DTS decoder To COAXIAL type digital audio input To COAXIAL DIGITAL AUDIO OUT
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. 1996-2007 DTS, Inc. All Rights Reserved.

Connecting to an HDMI or a DVI device


About HDMI HDMI (High Denition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specication. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays. HDMI has the capability to support standard, enhanced, or highdenition video plus standard to multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

75 coaxial cable (not supplied)

Back side

Connecting to an amplier equipped with an MPEG audio decoder


MPEG2 sound You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an amplier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
DVI device To DVI output To PC AUDIO IN To HDMI IN Audio cord (not supplied) HDMI - to - DVI adapter cable (HDMI type A connector) (not supplied) or HDMI device To HDMI out (not supplied) HDMI cable (type A connector)

Back side
Amplier equipped with an MPEG2 audio decoder To COAXIAL type digital audio input To COAXIAL DIGITAL AUDIO OUT

75 coaxial cable (not supplied)

Note: You must select the corresponding audio input source (HDMI or DVI) on the menu screen (see Selecting the HDMI audio input source on page 41). Otherwise you will only see the image with no sound.

18
J50S0101A.indb 18 1/19/08 2:41:20 PM J50S0101A.indb 19

19
1/19/08 2:41:21 PM

Connections

Basic setup

Connecting to optional equipment (Continued)/ Power source


Connecting to a PC (Personal Computer)
Before you connect this TV/DVD to your PC, change the adjustment of your PCs Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the rear of the TV/DVD. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC AUDIO IN jack of the TV/DVD. Select PC by pressing INPUT repeatedly. Switch on the computer. The TV/DVD can operate as the computer monitor Back side Monitor Display modes MODE Resolution VGA 640x480 VGA 720x400 SVGA 800x600 XGA 1024x768 WXGA 1280x768 WXGA 1280x720 WXGA 1360x768 To return to normal mode Press INPUT again. Refresh rate 60Hz 70Hz 60Hz 60Hz 60Hz 60Hz 60Hz

Auto Setup
The Auto Setup function helps to install your TV/DVD easily. It leads you the Language selection, Air/Cable selection and Automatic channel search. IMPORTANT: Make sure that the antenna or cable TV system connection is made!

POWER

ENTER / / / EXIT/CANCEL

Auto Setup

1 2

To turn on the TV/DVD, press POWER. POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.

Now the Automatic Search starts.


Auto Setup
Language Signal Type Automatic Search English Cable Start

Basic setup

To PC AUDIO IN jack Audio cord (not supplied)

Analog Channel Found : 0 Digtal Channel Found : 0

To PC MONITOR IN

Auto Setup menu appears on the screen. Press or to select Language, then press or to select your desired language.
Auto Setup
Language Signal Type Automatic Search English Cable Start

EXIT : End

VGA cable (not supplied)

If you press EXIT/CANCEL, the Automatic Search stops and changes to the TV screen. After the starting setup is completed, the TV channel appears on the screen. Note: The Auto Setup function will work only when you press POWER for the first time. The process of Automatic Search may take 15 to 30 minutes to complete, depending on your regional cable service.

Note: The on-screen displays will have a different appearance in PC mode than in TV mode. If there is no video signal from the PC when the unit is in PC mode, No signal will appear on the TV/DVD-screen.

Power source
To use AC power source 1. Connect the AC cord plug into this TV/DVDs AC INPUT jack. 2. Connect the AC cord into an AC outlet.
Illustration of 19LV505

: Select

: Adjust

3
AC Outlet Wider Hole and Blade

Press or to select Signal Type, then press or to select Air or Cable.


Auto Setup
Language Signal Type Automatic Search English Cable Start

: Select

: Adjust

Air Cable

- VHF/UHF channels - Cable TV channels

AC 120V, 60Hz AC cord (supplied) Note: Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). Use the attached power cord only. If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade. It is the users responsibility to have an electrician replace the obsolete outlet. If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from the AC outlet and plug it back in. The unit should return to normal operation. If the AC cord plug is plugged in for the first time, wait for approx. 5 seconds before pressing POWER.

Press or to select Automatic Search, then press ENTER.


Auto Setup
Language Signal Type Automatic Search English Cable Start

: Select

: Adjust

20
J50S0101A.indb 20 1/19/08 2:41:22 PM J50S0101A.indb 21

21
1/19/08 2:41:23 PM

Basic setup

Setting the language


This TV/DVD can display the on screen language in English, French or Spanish. Select the language you prefer rst, then proceed with the other menu options.

POWER

To memorize channels
This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD memory. To use this TV/DVD with an antenna, set the Tuning Band s menu option to the Air mode. When shipped from the factory, this menu option is in the Cable mode.

MENU ENTER / / / EXIT/CANCEL

ENTER / / / EXIT/CANCEL MENU

Setting the language

Air/Cable selection

Automatic search

1 2

To turn on the TV/DVD, press POWER. POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.

Press or to select the desired language: English, French (Franais) or Spanish (Espaol).

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Channel, then press or ENTER.
Main Menu
Picture Audio

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Channel, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup

Basic setup

Press MENU. The TV menu screen will appear. Press or to select Setup, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

Channel Lock Setup


: Select ENTER:Set

: Select

ENTER:Set

Press EXIT/CANCEL to return to the normal screen.

Press or to select Auto Ch Memory, then press or ENTER.

Press or to select Auto Ch Memory, then press or ENTER.


Channel

Press or to select Language.

Setup
Closed Caption Language Video Label Backlight Auto Shut Off Aspect Reset
: Select

>> English >> 16 Off On >>


: Adjust

Note: If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the TV/DVDs operation. In such case, disconnect the AC cord once, then connect it again. If no buttons are pressed for more than about 60 seconds, the MENU screen will return to normal operation automatically. The TV section has its own menu and the DVD section also has its own menu 60 .

Channel
Add/Delete Auto Ch Memory Ch Label >> >> >>

Add/Delete Auto Ch Memory Ch Label

>> >> >>

Press or to select Signal Type.

: Select

ENTER:Set

Auto Ch Memory
Signal Type Automatic Search Cable Start

Press or to select Automatic Search, then press ENTER.


Auto Ch Memory
Signal Type Automatic Search Cable Stop

Press or to select Air or Cable.

Analog Channel Found : 0 Digital Channel Found : 0

: Select

ENTER:Cancel

Auto Ch Memory
Signal Type Automatic Search Air Start

The TV/DVD will begin memorizing all the channels available in your area.

Air Cable

- VHF/UHF channels - Cable TV channels

5
22
J50S0101A.indb 22 1/19/08 2:41:24 PM

Press EXIT/CANCEL to return to the normal screen.

23
J50S0101A.indb 23 1/19/08 2:41:26 PM

Basic setup

To memorize channels (Continued)

ENTER / / / EXIT/CANCEL MENU

ENTER / / EXIT/CANCEL MENU

Add/Delete channel
You can select the channel that you want to skip.

Adding Channel
If you find a new channel unregistered, you can add the new channel into the channel memory.

Clear All
All channels are deleted from the channel memory. Basic setup

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Channel, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

Press or to select the channel that you want to skip.


Add/Delete
CH 2 3 3-001 3-002 4 Signal Analog Analog Digital Digital Analog Add Add Delete Add Delete

1 2

Tune in the new channel.

1
Main Menu
Picture Audio

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Channel, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

Press MENU. The TV menu screen will appear. Press or to select Channel, then press or ENTER.

: Select

: Adjust

Press or to select Add/Delete, then press or ENTER.


Channel
Add/Delete Auto Ch Memory Ch Label >> >> >>

Press or to select Add or Delete, whichever function you want to perform.


Add/Delete

Channel Lock Setup


: Select ENTER:Set

CH 2 3 3-001 3-002 4

Signal Analog Analog Digital Digital Analog

Delete Add Delete Add Delete

Press or to select Add/Delete, then press or ENTER.


Channel

Press or to select Add/Delete, then press or ENTER.


Channel

Add/Delete Auto Ch Memory Ch Label

>> >> >>

: Select : Select ENTER:Set

: Adjust

Press or to select Add/Delete, then press or ENTER.


Add/Delete
Adding Channel Add/Delete Clear All >> >> >>

6 7

Repeat steps 4 - 5 for other channels you want to add or delete. Press EXIT/CANCEL to return to the normal screen.

Add/Delete Auto Ch Memory Ch Label

>> >> >>


: Select ENTER:Set

: Select

ENTER:Set

Press or to select Clear All, then press or ENTER.


Add/Delete

Press or to select Adding Channel, then press or ENTER. The new channel will be added into the channel memory.
Add/Delete
Adding Channel Add/Delete Clear All >> >> >>

Adding Channel Add/Delete Clear All

>> >> >>

: Select

ENTER:Set

: Select

ENTER:Set

4
: Select ENTER:Set

Press EXIT/CANCEL to return to the normal screen.

5
24
J50S0101A.indb 24 1/19/08 2:41:27 PM

Press EXIT/CANCEL to return to the normal screen.

25
J50S0101A.indb 25 1/19/08 2:41:29 PM

TV operation

TV operation

POWER 09,

SLEEP DISPLAY VOL +/ MUTE CH RTN

VOL +/ CH /

TV operation

TV operation (continued)
TO SELECT ANALOG CHANNELS 1-9: Press 1-9 as needed. Example, to select channel 2, press 2. 10-99: Press the 2 digits in order. Example, to select channel 12, press 1, 2. 100-125: Press the 3 digits in order. Example, to select channel 120, press 1, 2, 0. TO SELECT DIGITAL CHANNELS Press the first 3 digits, then press the button, followed by the remaining number. Example, to select channel 015-001, press 0, 1, 5, , 1. If a channel is selected with only audio content, Audio only will be displayed on the screen. If a channel is selected with a weak digital signal, Digital channel signal strength is low will be displayed on the screen. The same program may be available on either an analog channel or a digital channel. You may choose to watch either format. If a channel is selected to which you have not subscribed, Digital channel is encrypted will be displayed on the screen. VHF/UHF/CABLE CHANNELS DISPLAY Press DISPLAY to display the current information on the screen. SLEEP To set the TV/DVD to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each press of the SLEEP button (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to Off.
S l e e p Ti m e r 0h 10m

1 2

To turn on the TV/DVD, press POWER. (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.)

TV operation

62-001 HDTV Moving Picture1

Adjust the volume level by pressing VOL + or . The volume level will be indicated on the screen by orange bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of orange bars also decreases.

CH-1 Digital

Sleep Timer Off English

Cable

No Program Information is available

When the TV/DVD receives a digital signal, the digital information will appear. Channel number Channel label (if preset) V-Chip rating Sleep timer Program guide Resolution

Natural 1080i


14

Station name Broadcast program name Signal type Audio language Picture size
Sleep Timer Off Cable

3 4

Set the Signal Type option to the appropriate position (see Air/Cable selection on page 23). Air Cable - VHF/UHF channels - Cable TV channels

HEAD PHONES Insert a stereo headphones (not supplied) with a 1/8 mini plug into the HEAD PHONE jack on the rear panel. If you connect headphones, the sound from TV/DVD speakers is muted.

Analog

Press the Direct Channel Selection (0-9, ) buttons or CH / to select the channel. (If you press only channel number, channel selection will be delayed for a few seconds.)

Air VHF 2-13 UHF 14-69

Cable VHF 2-13 STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1) 100-125 (100) (125) 01 (5A)

When the TV/DVD receives a analog signal, the analog information will appear. Channel number Channel label (if preset) V-Chip rating Signal type Sleep timer Audio information (Stereo or SAP) Picture size Resolution
Natural 480i

Press DISPLAY again to clear the call display. Note:


After a few seconds, DISPLAY screen will return to normal TV-operation automatically. CH RTN This button allows you to go back to the last channel selected by pressing CH RTN. Press CH RTN again to return to the last channel you were watching.

Note: If a channel with no broadcast is selected, the sound will automatically be muted. It may take a few seconds for a digital channel picture to appear on screen after being selected.

MUTE Press MUTE to switch off the sound. The TV/DVDs sound will be silenced and Mute will appear on the screen. The sound can be switched back on by pressing this button again or the VOL + or .

26
J50S0101A.indb 26 1/19/08 2:41:31 PM J50S0101A.indb 27

27
1/19/08 2:41:32 PM

TV operation

Labeling channels
Channel label appear with the channel number display each time you turn on the TV/DVD, select a channel, or press DISPLAY. You can choose any four characters to identify a channel.

Labeling video inputs


The Video Label feature allows you to label each input source for your TV/DVD.

ENTER / / / EXIT/CANCEL MENU

ENTER / / / EXIT/CANCEL MENU

Labeling channels

Labeling video inputs

Press MENU in the TV mode. The TV menu screen will appear. Press then press or to select Channel menu, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

Press or repeatedly until the character you want appears in the first space.
Ch Label
Channel Number Ch Label Label Clear 15-1 A >>

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Setup, then press or ENTER.
Main Menu
Picture Audio Channel Lock

Press or to select the desired label for that input source.


Video Label

TV operation

Video ColorStream HD HDMI

SAT -

: Select

: Adjust

ENTER:Set

Setup
: Select ENTER:Set

: Select

: Adjust

The characters rotation as follows:


, () @ / + = -

Press or to select Ch Label, then press or ENTER. The Ch Label menu will appear.
Channel
Add/Delete Auto Ch Memory Ch Label >> >> >>

SPACE

Press or to select Video Label, then press or ENTER.


Setup
Closed Caption Language Video Label Backlight Auto Shut Off Aspect Reset >> English >> 16 Off On >>
ENTER:Set

If the character which you desire appears, press ENTER. Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters.

VCR DVD DTV SAT CBL HD

: Uses the default label name : Video cassette recorder : DVD video : Digital TV set-top box : Satellite box : Cable box : HDMI (only for HDMI input)

Press EXIT/CANCEL to return to the normal screen.

: Select

ENTER:Set

5 6

When you finish inputting the label name, press EXIT/CANCEL to return to the normal screen.

: Select

Press or to select a channel you want to label, then press .


Ch Label
Channel Number Ch Label Label Clear 15-1 >>

Press or to select an input which you want to label.


Video Label

Repeat steps 3-5 for other channel. You can assign a label to each channel.

Video ColorStream HD HDMI

: Select

: Adjust

To clear a Ch Label After step 3 above, press or to select Label Clear, then press or ENTER. Note: The channel labels will be reset after Automatic Search on page 23.

: Select

: Adjust

28
J50S0101A.indb 28 1/19/08 2:41:34 PM J50S0101A.indb 29

29
1/19/08 2:41:36 PM

TV operation

Setting the V-Chip


An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to TV Rating and Movie Rating if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. Notes: If you forget the password, press DISPLAY four times within ve seconds while the TV is in password entering mode. This allows you to reset your password.

09 DISPLAY ENTER / / MENU

09

ENTER / / / MENU

To register a password

To change a password

To set the V-Chip

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Lock, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Lock, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Lock, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup

Press or to select V-Chip Set, then press or ENTER. The V-Chip Set Menu appears.
Lock
V-Chip V-Chip Set V-Chip Set (DTV) Update Change Password On >> >> >> >>

TV operation

: Select

ENTER:Set

: Select

ENTER:Set

: Select

ENTER: Set

Select and enter your password (4 digits) using Number buttons (0-9), then press ENTER.
Lock
New Password ----

Press or to select Change Password, then press or ENTER. The Change Password screen will appear.
Lock
V-Chip V-Chip Set V-Chip Set (DTV) Update Change Password Off >> >> >> >>

Use Number buttons (0-9) to enter your password, then press ENTER. Then Lock menu will appear.
Lock
Password ----

Press or to select which rating will be used, then press or ENTER. Each rating below will appear.
V-Chip Set
TV Rating Movie Rating >> >>

: Select [0-9] : Select ENTER:Set : Select ENTER: Set [0-9] : Select ENTER:Set

ENTER: Set

TV Rating
TV Rating
ALL D TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA
: Select ENTER:Set

Enter the same password again to confirm, then press ENTER. The password is now registered.
Lock
Confirm Password ----

Enter a new password using Number buttons (0-9), then press ENTER.
Change Password
New Password Confirm Password -------

Press or to select V-Chip, then press or to select On .


Lock
V-Chip V-Chip Set V-Chip Set (DTV) Update Change Password On >> >> >> >>

FV

[0-9] : Select [0-9] : Select ENTER:Set

ENTER:Set

: Select

: Adjust

Note: The V-Chip feature is available only for the U.S. V-Chip system. The Canadian V-Chip system is not supported.

Enter the same password again to confirm, then press ENTER. The new password is now registered.

You can set the rating using age level and genre. Age: TV-Y : All children TV-Y7 : 7 years old and above TV-G : General audience TV-PG : Parental guidance TV-14 : 14 years old and above TV-MA : 17 years old and above Genre: ALL : All D : Dialogue L : Language S : Sex V : Violence FV : Fantasy Violence

30
J50S0101A.indb 30 1/19/08 2:41:37 PM J50S0101A.indb 31

31
1/19/08 2:41:38 PM

TV operation

Setting the V-Chip (continued)


MUTE ENTER / / / EXIT/CANCEL MENU
As a supplement to the standard V-Chip rating system, your television will be able to download an additional rating system, if such a system becomes available in the future.

09

ENTER / /

To set the V-Chip (Continued)


Movie Rating
Movie Rating
G PG PG-13 R NC-17 X

To download the additional V-Chip rating system (when available)

1
ENTER:Set

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Lock, then press or ENTER.
Main Menu
Picture Audio Channel

You also need Update procedure to update rating information.

TV operation

: Select

Lock Setup

G PG PG-13 R

: All ages : Parental guidance : Parental guidance less than 13 years old : Under 17 years old parental guidance suggested NC-17 : 17 years old and above X : Adult only

: Select

ENTER:Set

Use Number buttons (0-9) to enter your password, then press ENTER. Then Lock menu will appear.
Lock

Press to select the desired rating, / / / then press ENTER.

Password

----

Note: You can only download the additional V-Chip rating system when your TV/DVD is receiving a digital signal. When you download the additional rating system, it may take some time for the download to occur. The V-Chip rating information and system are not determined or controlled by the TV/DVD. The standard V-Chip rating system is available whether your TV/DVD is receiving a digital signal or not, and will block both analog and digital programs. To set the restriction level using the standard V-Chip rating system, select V-Chip Set in step 3. The downloadable V-Chip rating system is an evolving technology, and availability, content, and format may vary. You cannot select this feature if the TV/DVD is not receiving a digital signal for the current station.

[0-9] : Select

ENTER:Set

3
Press EXIT/CANCEL to return to the normal screen.

Press or to select V-Chip Set (DTV), then press or ENTER.


Lock
V-Chip V-Chip Set V-Chip Set (DTV) Update Change Password On >> >> >> >>

To use the TV/DVD after it is protected. When a program is received that is blocked by the VChip, press MUTE, then enter your password. The protection will be temporarily overridden. If the TV/ DVD is turned off or the channel is changed, the V-Chip restriction will be reactivated. Note: The V-Chip function is activated only on programs and input sources that include a rating signal.

: Select

: Adjust

4 5
1/19/08 2:41:40 PM

If the TV/DVD is not storing the additional rating system, the TV/DVD will begin downloading it, which may take some time to be completed. Set your preferred content rating limits for the additional rating system.

32
J50S0101A.indb 32 J50S0101A.indb 33

33
1/19/08 2:41:41 PM

TV operation

Setting the closed captions


WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display closed captioned television programs. Closed captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.

CC advanced
When you have selected Custom as the display method, you can adjust the various setting listed below as follows: This feature is designed to customize Digital Captions only.

ENTER / / / EXIT/CANCEL MENU CLOSED CAPTION

ENTER / / / EXIT/CANCEL MENU

CC advanced Setting the closed captions

Press MENU in the TV mode. Press or to select Setup, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

Press or to select Analog Caption or Digital Caption, then press or to select the desired Closed Caption mode. When you select Analog Caption, you can choose C1, C2, C3, C4, T1, T2, T3 and T4. When you select Digital Caption, you can choose from CS1, CS2, CS3, CS4, CS5 and CS6.
Closed Caption
CC Setting CC Priority Analog Caption Digital Caption Digital CC Preset CC Advanced On Digital CC C1 CS1 Default >>

Press MENU in the TV mode. Press or to select Setup, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

Press or to select the desired item, then press or to change the setting.
CC Advanced
Text Size Text Type Text Edge Text Color Text Opacity Background Color Background Opacity
: Select : Adjust

Auto Auto Auto Auto Auto Auto Auto

TV operation

Press or to select Closed Caption, then press or ENTER. The Closed Caption menu will appear.
Setup
Closed Caption Language Video Label Backlight Auto Shut Off Aspect Reset
: Select

Press or to select Closed Caption, then press or ENTER. The Closed Caption menu will appear.
Setup
Closed Caption Language Video Label Backlight Auto Shut Off Aspect Reset >> English >> 16 Off On >>
ENTER:Set

: Select

: Adjust

>> English >> 16 Off On >>


ENTER:Set

Press or to select CC Priority, then press or to select Digital CC or Analog CC.

: Select

3
Note: Depending on the broadcast signal, some Analog Captions will function with a Digital broadcast signal. This step prevent that two kind of captions are overlapping.

Press or to select Digital CC Preset, then press or to select Custom.


Closed Caption
CC Setting CC Priority Analog Caption Digital Caption Digital CC Preset CC Advanced On Digital CC C1 CS1 Custom >>

You can select from among the following items and parameters. Text Size: Auto, Small, Standard, Large Text Type: Auto, Style1, Style2, Style3, Style4, Style5, Style6, Style7 Text Edge: Auto, None, Raised, Depressed, Uniform, Left Shadow, Right Shadow Text Color: Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan Text Opacity: Auto, Solid, Transparent, Translucent, Flashing Background Auto, Black, White, Red, Green, Color: Blue, Yellow, Magenta, Cyan Background Auto, Solid, Transparent, Opacity: Translucent, Flashing

Press or to select CC Setting, then press or to select On. On: Captions will be displayed on the screen. Off: Captions will not be displayed on the screen.
Closed Caption
CC Setting CC Priority Analog Caption Digital Caption Digital CC Preset CC Advanced Off Digital CC C1 CS1 Default >>

6
Note:

Press EXIT/CANCEL to return to the normal screen.

: Select

: Adjust

Press EXIT/CANCEL to return to the normal screen.

Press or to select CC Advanced, then press or ENTER. The CC Advanced menu will appear.
Closed Caption

You cannnot select CC Advanced in the menu before set Digital CC preset to Custom. You cannot set the Closed Caption Text Color and Background Color as the same color.

: Select

: Adjust

Note:

You can also display the Closed Caption menu screen by pressing CLOSED CAPTION on the remote control. Digital caption feature is not available for analog channel.
Important Note: If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, set CC Setting to Off.

CC Setting CC Priority Analog Caption Digital Caption Digital CC Preset CC Advanced

On Digital CC C1 CS1 Custom >>

: Select

ENTER:Set

34
J50S0101A.indb 34 1/19/08 2:41:42 PM J50S0101A P29-35.indd 35

35
1/21/08 10:10:27 AM

TV operation

Adjusting the picture preference/ Picture settings


You can select four picture modesSports, Standard, Movie and Memory as described in the following table: Picture settings are factory preset but you can adjust them individually as follows:

Viewing the wide-screen picture formats


You can view programs in a variety of picture sizes Natural, Theather Wide1, Theather Wide2, Theather Wide3 and Full.

0-4

ENTER / / / EXIT/CANCEL MENU

ENTER / / EXIT/CANCEL PIC SIZE

Adjusting the picture preference

Picture settings

Viewing the wide-screen picture formats

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Picture, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

1 2

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Picture, then press or ENTER. Press or to select Picture Setting.
Picture
Picture Setting Picture Preference Picture Size Film Mode PC Setting DNR
: Select

1 2

Press MENU. Press or to select Picture, then press or ENTER. Press or to select Picture Size, then press or ENTER to display Picture Size menu. Press or corresponding Number / button (0-4) to select the desired picture size, as described below and on the next page.
Picture Size 0.Natural 1.Theater Wide1

Theater Wide2 picture size (for letter box programs) The entire picture is uniformly enlargedit is stretched the same amount both wider and taller (retains its original proportion).

TV operation

The top and bottom edges of the picture may be hidden.

>> Sports >> On >> On


ENTER:Set

ABCDEFG----------------

2.Theater Wide2 3.Theater Wide3 4.Full

Press or to select Picture Preference.

Press or to select the item you want to adjust. Press or to adjust the setting.
Picture Setting

[0-4]:Select

Picture
Picture Setting Picture Preference Picture Size Film Mode PC Setting DNR
: Select

>> Sports >> On >> On


: Adjust

25 Brightness 50 Contrast 25 Sharpness 25 Color 0 Tint Color Temperature


: Select : Adjust

Note: Selectable picture sizes may vary depending on the input source or broadcast signal. Picture Size menu also can be displayed by pressing PIC SIZE on the remote control.
Cool
ENTER:Set

Note: This picture size is not available on 22LV505. Theater Wide3 picture size (for letter box programs with subtitles) To fill the width of the screen, it is extended horizontally. However; it is only slightly extended at the top and the bottom. The top and bottom edges of the picture may be hidden.

Press EXIT/CANCEL to return to the normal screen.


ABCDEFG---------------ABCDEFG--------------------------

Press or to select a mode you want to adjust.


Picture
Picture Setting Picture Preference Picture Size Film Mode PC Setting DNR
: Select

>> Standard >> On >> On


: Adjust

Brightness decrease brightness Contrast decrease contrast Sharpness makes picture softer Color be pale color Tint be reddish color
Color Temperature

increase brightness increase contrast makes picture clearer be brilliant color be greenish color

Natural picture size


In some cases, this image will display the size of standard 4:3 with a gray side bar.

Note: To select this picture size on 22LV505, select Theater Wide2. Full picture size (for 16:9 source programs) Full will display the picture at the maximum size.

Mode Sports Standard Movie Memory

Picture Quality Bright and dynamic picture (factory-set) Standard picture quality (factory-set) Movie-like picture setting (factory-set) Your personal preferences (set by you; see Picture settings at right).

Cool Standard Warm

Picture Quality Bluish Neutral Reddish

Theater Wide1 picture size (for 4:3 format programs) To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio. The top and bottom edges of the picture may be hidden.

After your desired setting, press EXIT/ CANCEL to return to the normal screen.

4
36

After your desired setting, press EXIT/ CANCEL to return to the normal screen.

Note: The Contrast default setting is set to maximum at the factory.

Note: Some High Definition and/or Digital broadcasts may not allow you to change the picture size. 19LV505/19LV506: In ColorStream HD/HDMI mode with a scanning rate of 720p or 1080i, only the Theater Wide2 and Full picture size features are available. 22LV505: In ColorStream HD/HDMI mode with a scanning rate of 720p or 1080i, picture size feature will not work. In PC Mode, only the Natural and Full picture size features are available. Additionally this feature will not work when display mode is WXGA.

37
1/21/08 10:09:43 AM J50S0101A.indb 37 1/19/08 2:41:46 PM

J50S0101A P36-43.indd 36

TV operation

Film Mode/DNR
A smoother motion may be obtained by setting the Film Mode to On when you view a DVD. DNR (Digital Noise Reduction) can reduce the roughness of the picture. (This function is available only for analog broadcast.)

Picture control adjustment in the PC mode


You can adjust to optimize the performance of the TV/DVD in the PC mode.

ENTER / / / EXIT/CANCEL MENU

ENTER / / / EXIT/CANCEL MENU

Film Mode

DNR

Picture control adjustment in the PC mode

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Picture, then press or ENTER.
Main Menu

Press MENU in the TV mode. Then press or to select Picture, then press or ENTER.
Main Menu
Picture

Picture Audio Channel Lock Setup

Audio Channel Lock Setup


: Select ENTER:Set

1 2

Press INPUT, then press or 4 to select / the PC mode. Press MENU. Then press or to select Picture, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup

Press or to adjust the setting.

TV operation

: Select

ENTER:Set

Press or to select Film Mode.

2
>> Sports >> On >> On

Press or to select DNR.

: Select

ENTER:Set

Picture

Picture
Picture Setting Picture Preference Picture Size Film Mode PC Setting DNR
: Select

Picture Setting Picture Preference Picture Size Film Mode PC Setting DNR
: Select : Adjust

>> Sports >> On >> On

Press or to select PC Setting, then press or ENTER.


Picture
Picture Setting Picture Preference Picture Size Film Mode PC Setting DNR
: Select

Hor Position: To adjust the horizontal position of the image on the PC mode. Ver Position: To adjust the vertical position of the image on the PC mode. Clock: To minimize any vertical bars or stripes visible on the screen background. Phase: This must be adjusted after the frequency of the PC mode has been set to 60Hz to optimize picture quality (page 20).

: Adjust

Press or to select On or Off.

3
>> Sports >> Off >> On

Press or to select On or Off.

>> Sports >> On >> On


ENTER:Set

6 7

After adjusting, press ENTER to return to the PC Setting menu. Then continue to adjust the other items.

Picture

Picture
Picture Setting Picture Preference Picture Size Film Mode PC Setting DNR
: Select

Picture Setting Picture Preference Picture Size Film Mode PC Setting DNR
: Select : Adjust

>> Sports >> On >> Off

Press or to select the desired item you want to adjust.


PC Setting
Hor Position Ver Position Clock Phase 25 25 0 25

Press EXIT/CANCEL to return to the normal screen.

: Adjust

Press EXIT/CANCEL to return to the normal screen.

: Select

: Adjust

ENTER:Set

Note: A smoother motion may be obtained by setting the Film Mode to On when you view a DVD from the DVD player connected with ColorStream (component video) inputs.

38
J50S0101A.indb 38 1/19/08 2:41:47 PM J50S0101A P36-43.indd 39

39
1/21/08 10:09:44 AM

TV operation

Sound control adjustment/ Selecting Stereo/Second Audio Program (SAP)


The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language or other audio information. When the TV/DVD receives a stereo or SAP broadcast, the word Stereo or SAP displays on-screen every time you press DISPLAY.

Selecting the audio language/ Selecting the HDMI audio input source
ENTER / / / EXIT/CANCEL MENU
When two or more audio languages are included in a digital signal, you can select one of the audio language. (This function is available only for digital broadcast.) When you use PC AUDIO IN jacks with HDMI or DVI device, you must select HDMI audio input source from HDMI or DVI.

0-6

ENTER / / / EXIT/CANCEL MENU

Sound control adjustment

Selecting Stereo/Second Audio Program (SAP)

Selecting the audio language

Selecting the HDMI audio input source

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Audio , then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

Press MENU in the TV mode. Press or to select Audio, then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

Press MENU in the TV mode. Then press or to select Audio , then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Audio , then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

TV operation

Press or to select the item you want to adjust. Then press or to adjust each setting.
Audio
Bass 15 15 Treble Balance 0 MTS Audio Language HDMI Audio

Press or to select MTS, then press or to select Stereo.


Audio
Bass 15 15 Treble Balance 0 MTS Audio Language HDMI Audio

Press or to select Audio Language, then press or ENTER to display the Audio Language menu.
Audio
Bass 15 15 Treble Balance 0 MTS Audio Language HDMI Audio

Press or to select HDMI Audio. Then press or to select HDMI or DVI.


Audio
Bass 15 15 Treble Balance 0 MTS Audio Language HDMI Audio

Stereo English HDMI

Stereo English HDMI

Stereo English HDMI

: Select

: Adjust : Select : Adjust

Stereo No Info. HDMI

: Select

: Adjust : Select : Adjust

Bass: Treble:

Press or to adjust the bass sound. Press or to adjust the treble sound. Balance: Press or to obtain an equal sound level from both speakers.

Press EXIT/CANCEL to return to the normal screen.

Press or Number buttons (0-6) to select / your desired language.


Audio Language
0. English 1. Language 1 2. Language 2 3. French 4. Language 3 5. Spanish 6. No Info
[0-6]: Select

HDMI: DVI:

When you connect the HDMI device to the TV, select this setting. When you connect the DVI device to the TV with analog audio cords, select this setting.

After you desired setting, press EXIT/CANCEL to return to the normal screen.

Note: Generally you can leave your TV in stereo mode because the TV automatically outputs the type of sound being broadcast (stereo or mono). If the stereo sound is noisy, select Mono to reduce the noise. To listen to a second audio program (SAP) Press or to select SAP in step 2 above. The TV speakers will output the second audio program instead of normal audio.

Press EXIT/CANCEL to return to the normal screen.

After you desired setting, press EXIT/CANCEL to return to the normal screen.

40
J50S0101A.indb 40 1/19/08 2:41:50 PM J50S0101A.indb 41

41
1/19/08 2:41:51 PM

TV operation

Using the aspect feature/ Adjusting the back lighting


When the Aspect feature is set to On and the TV receives a 480i signal, the picture size is automatically selected (as described in the following table). The Backlight feature adjusts the screen brightness for improved picture clarity.

Setting the Auto Shut Off/ Resetting your settings


ENTER / / / EXIT/CANCEL MENU
If the Auto Shut Off feature is On, a station being viewed stops broadcasting and the TV is not operated, the TV will automatically shut itself off after 15 minutes. The Reset function returns your settings to the factory settings.

ENTER / / / EXIT/CANCEL MENU

Using the aspect feature

Adjusting the back lighting

Setting the Auto Shut Off

Resetting your settings

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Setup , then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup
: Select ENTER:Set

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Setup , then press or ENTER.
Main Menu

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Setup , then press or ENTER.
Main Menu

Press MENU in the TV mode. The TV menu screen will appear. Press or to select Setup , then press or ENTER.
Main Menu
Picture Audio Channel Lock Setup

TV operation

Picture Audio Channel Lock Setup


: Select ENTER:Set : Select ENTER:Set : Select ENTER:Set

Picture Audio Channel Lock Setup

Press or to select Aspect. Press or to select On or Off.


Setup
Closed Caption Language Video Label Backlight Auto Shut Off Aspect Reset
: Select : Adjust

2
>> English >> Off On >>

Press or to select Backlight.

2
>> English >> Off On >>

Press or to select Auto Shut Off. Press or to select On or Off.


Setup
Closed Caption Language Video Label Backlight Auto Shut Off Aspect Reset
: Select : Adjust

Press or to select Reset.


Setup
Closed Caption Language Video Label Backlight Auto Shut Off Aspect Reset
: Select

Setup
Closed Caption Language Video Label Backlight Auto Shut Off Aspect Reset
: Select : Adjust

16

>> English >> 16 Off On >>

>> English >> 16 Off On >>


ENTER:Set

16

After you desired setting, press EXIT/CANCEL to return to the normal screen.

Press or to adjust the setting.

3
>> English >> Off On >>

After you desired setting, press EXIT/CANCEL to return to the normal screen.

3 4

Press or ENTER to return your settings to the factory settings.

Setup
Closed Caption Language Video Label Backlight Auto Shut Off Aspect Reset
: Select : Adjust

Aspect ratio of signal source 4:3 Normal 16:9 Full 4:3 Letter box Not dened

Automatic aspect size (When Aspect is On) Natural Full Theater Wide2 User-set mode

Reset will appear on the screen approx. 3 seconds, then it returns to the normal

After you desired setting, press EXIT/CANCEL to return to the normal screen.

Note: The Reset function returns your adjustments to the following factory settings:
Picture Setting Brightness ...... center (25) Contrast ............ max (50) Sharpness...... center (25) Color .............. center (25) Tint ................... center (0) Color Temperature ... Cool Picture Preference .... Sports Film Mode .......................On PC Setting Hor Position ... center (25) Ver Position.... center (25) Clock ................ center (0) Phase............. center (25) Bass................... center (15) Treble ................ center (15) Balance................ center (0)

42
J50S0101A P36-43.indd 42 1/21/08 10:09:44 AM J50S0101A P36-43.indd 43

43
1/21/08 10:09:45 AM

Basic playback TV/DVD POWER To obtain a higher quality picture VOL +/ ENTER / / /
POWER

Playing a disc
This section shows you the basics on how to play a disc. CAUTION Keep your ngers well clear of the disc slot when disc is loading or unloading. Neglecting to do so may cause serious personal injury.
DVD VCD CD

EJECT VOLUME +/ PLAY STOP

EJECT
Occasionally, some picture noise may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. In such case, you may reduce the Sharpness with the Picture Setting menu (see page 36).

About

DVD

VCD

CD

PLAY STOP

Basic playback

The DVD VCD CD icons on the heading bar show the playable discs for the function described under that heading. : You can use this function with DVD video discs. VCD : You can use this functio n with Video CDs. CD : You can use this function with Audio CDs and CD-R/RW CDs.
DVD VCD CD

PLAY STOP PAUSE

Preparations: When connecting to other equipment, turn the power off.

Basic playback (continued)


To remove the disc
Press EJECT. Remove the disc after the disc comes out.

Press POWER on the unit or on the remote control to turn on the unit. POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen. Every time you press POWER, the TV/DVD starts from TV mode. When using an amplier, switch on the amplier.

On the TV screen, changes to Reading and then playback commences.


Reading

To pause playback (still mode)


Press PAUSE during playback. To resume normal playback, press PLAY.
The sound is muted during still mode.

Basic playback

Press TV/DVD on the remote control to select DVD mode. The DVD startup screen will appear on the TV screen.

A menu screen will appear on the TV screen if the disc has a menu feature. Press / or / on the remote control to select title, then press ENTER. Title is selected and play commences.

To stop playback
Press STOP.

Press VOLUME + or to adjust the volume.


Volume : 25

Load a disc in the disc slot.

6
Load the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position. If a disc is inserted during some modes other than DVD mode, it may switch to DVD mode and then playback may be begun automatically.

Press STOP to end playback.

Resuming facility The unit records the stopped point, depending on the disc. appears on the screen. Press PLAY to resume playback (from the scene point). If you press STOP again ( appears on the TV screen.), the unit will clear the stopped point.

Note: If a non-compatible disc is loaded, Incorrect Disc, Region Code Error or Parental Error will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (see pages 7 and 64). Some discs may take a minute or so to start playback. When you set a single-faced disc label downwards (ie. the wrong way up), Reading will appear on the display for a few minutes and then Incorrect Disc will continue to be displayed. Some discs may not work the resuming facility. Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 53. Some playback operations of DVDs may be intentionally xed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs. Do not move the unit during playback. Doing so may damage the disc. Use the EJECT to unload and eject the disc. Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions. In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press POWER on the remote control once the movie is completed. There may be a slight delay between the button is pressed and the function activates.

start playback in the stop mode To Press PLAY.

Note: If the unit does not operate properly: Static electricity, etc., may affect the TV/DVD operation. In such s case, disconnect the AC cord, then connect it again.

44
J50S0101A.indb 44 1/19/08 2:41:56 PM J50S0101A.indb 45

45
1/19/08 2:41:58 PM

Basic playback

Advanced playback

Playing a disc (Continued)


PAUSE PLAY SKIP / REV / FF SLOW /

Zooming/Locating desired scene


This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. Use the title, chapter and time recorded on the DVD disc to locate the desired point to playback. In the case of VCD/Audio CD discs, time and track are used to locate the desired point to playback. To check the title/track, chapter/track and time, press DISPLAY.

09 JUMP DISPLAY ZOOM / / / ENTER EXIT/CANCEL

DVD VCD CD

Playing in fast reverse or fast forward directions


To resume normal playback
Press PLAY.

DVD VCD CD

Zooming
Press ZOOM during playback. The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0).
1

DVD VCD CD

Locating desired scene


Press JUMP during playback or resume stop mode.
Jump Title Chapter Time

Press REV or FF during playback. REV: Fast reverse playback FF: Fast forward playback Each time you press REV or FF button, the playback speed changes.

1 2

Note: The TV/DVD mutes sound during reverse and forward scan of DVD/VCD/Audio CD discs. The playback speed may differ depending on the disc. You can use fast reverse/fast forward playback for DivX CD.

Press or to select the Title/Track, Chapter or Time.


Jump

DVD VCD

Playing frame by frame


To resume normal playback
Press PLAY. Each time you press PAUSE, the picture advances one frame.

Press PAUSE during still playback.

Title Chapter Time

Advanced playback

Note: The sound is muted during frame by frame playback. You can use frame by frame playback for DivX CD.
DVD VCD

Press frame.

/ / /

to view a different part of the

Playing in slow-motion
(FORWARD)

You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction.

Press Number buttons (09) to input the number.


Jump Title Chapter Time 12

Press SLOW (REVERSE) or during playback.

To resume normal playback


Press PLAY.

Each time you press the button, the slow-motion speed changes.

Note: The sound is muted during slow-motion playback. The Video CD cannot play Reverse Slow.

In the zoom mode, press ZOOM repeatedly to return to a 1:1 view ( Off).

If you input a wrong number, press EXIT/CANCEL. Refer to the package supplied with the disc to check the numbers.

DVD VCD CD

Locating a chapter or track


or repeatedly to display the chapter or track number you want.
Playback starts from the beginning of the current chapter or track. When you press twice in quick successions, playback starts from the beginning of the preceding chapter or track.

Press SKIP

Playback starts from the selected chapter or track. To locate succeeding chapters or tracks.

Note: You can select the Pause, Slow or Search playback in the zoom mode. Some discs may not respond to zoom feature. Zoom function can be used for DivX CD.

Press ENTER. Playback starts. When you change the title, playback starts from Chapter 1 of the selected title. Some discs may not work in the above operation.

Note: A Prohibition symbol may appear at the upper right of the screen. This symbol means either the feature you tried is not available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD.

Note: In case of the Audio CD and Video-CD, only Track and Time can be selected. In case of the Video-CD playback with PBC, the JUMP does not work. To turn off PBC, see page 53 . Only Time search function can be used for DivX CD.

46
J50S0101A.indb 46 1/19/08 2:41:59 PM J50S0101A.indb 47

47
1/19/08 2:42:00 PM

Advanced playback

Marking desired scenes


The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene.

Repeat playback/A-B Repeat playback


ENTER / EXIT/CANCEL MARKER

PLAY MODE ENTER PLAY SKIP

REPEAT A-B

DVD VCD

Marking the scenes


Press MARKER during playback.

DVD VCD

Returning to the scenes


Press MARKER during playback or stop mode.

DVD VCD

Repeat playback
Press PLAY MODE during playback or stop mode.

DVD VCD CD

A-B Repeat playback

1 2

1 2

1 2

A-B repeat playback allows you to repeat a section between two selected points.

1
[DVD] Press ENTER repeatedly to select Chapter or Title. The unit automatically starts repeat playback after nishing the current title or chapter.

Press REPEAT A-B during playback. The start point is selected.


A

Select the blank Marker using or . Then press ENTER to mark the desired scene. Repeat this procedure to mark the other 2 scenes.

Press

or

to select the Marker 1-3.

Advanced playback

Play Mode
Repeat : Off

Press REPEAT A-B again. The end point is selected. Playback starts at the point that you selected. Playback stops at the end point and returns to Point A automatically, then starts again.
A B

Press MARKER to clear the display.

Press ENTER. Playback starts from the marked scene.

[Video CD] Press to select Repeat. Press ENTER repeatedly to select Track or All. The unit automatically starts repeat playback after nishing the current track.
Play Mode
Mode Repeat : Off : Off

Note: To cancel the Marker Some discs may not work with the marking operation. Follow the above steps 1~2, then press EXIT/CANCEL. The marking is cancelled when you eject the disc or turn the power off. Some subtitles recorded around the marker may fail to appear. In case of Video CD with PBC, Marker function is prohibited.

If you set the repeat mode during stop mode, press PLAY to start Repeat playback.

To resume normal playback Press REPEAT A-B again.

Off appears on the screen.

Press PLAY MODE again to clear the screen.

To resume normal playback Select Repeat : Off in step 2.


Note: Some discs may not work with the repeat operation. In case of Video CD with PBC, Repeat function is prohibited during playback. Chapter/Track repeat function is canceled whenever SKIP or is pressed.

Note: In A-B Repeat mode, subtitles near the A or B locations may not be displayed. You cannot set the A-B Repeat for the scenes that include multiple angles. A-B Repeat playback does not work when Repeat playback is activated. You may not be able to set A-B Repeat during certain scenes of the DVD. A-B Repeat does not work with an interactive DVD and MP3/WMA/JPEG CD. In case of Video CD with PBC, A-B Repeat is prohibited.

48
J50S0101A.indb 48 1/19/08 2:42:01 PM J50S0101A.indb 49

49
1/19/08 2:42:02 PM

Advanced playback

Program playback/Random playback


You can arrange the playback order of tracks on the disc. And the unit can also select tracks at random and playback them. These features work for Video CD. For Audio CD and MP3/WMA CD, please see Random playback (Audio CD/MP3/WMA/JPEG/DivX) 58 and Program playback (Audio CD/MP3/WMA/JPEG/DivX) 59 .

Changing angles/Title selection/DVD menu


09 DVD MENU / / / ENTER PLAY ANGLE TOP MENU PLAY MODE ENTER / / / EXIT/CANCEL PLAY

VCD VCD

Program playback
Press PLAY MODE in the stop mode.
Play Mode
Mode Repeat : Off : Off 1 2 3

Changing angles

1 2

Press / to return to the left column, then press / to select the Program Playback and press ENTER. The programs you selected will start to playback in order. To resume normal playback, select Mode: Off in step 2.

When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.

Press ANGLE during playback. The current angle will appear.


1/2

Press ANGLE repeatedly until the desired angle is selected.

Program Playback

Press or to select Mode, then press ENTER repeatedly to select Program.

Play Mode
Mode Repeat : Program : Off 1 2 3

Play Mode
Mode Repeat : Program : Off 1 2 3 9 3 11

Note: Depending on the DVD, you may not be able to change the angle even if multi-angles are recorded on the DVD.

Program Playback

Program Playback

Advanced playback

Title selection
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.
To change the program 1. Select Mode to Program (as step 2), press / / / to select the track number you want to change, then press EXIT/CANCEL. 2. Press Number buttons (09) to input the new track number. To clear the program one by one Select Mode to Program, press / / / to select the track number. Then press EXIT/CANCEL. To clear all the programs At the left column, press / to select Clear Program. Then press ENTER. Note: In playing back the Video CD with PBC, you cannot set Program playback. The program is cancelled when you eject the disc or turn the power off.

Press / to select the programming position. Press / and then use Number buttons (09) to input the track. To program others, repeat this step. If you input a wrong number, press EXIT/CANCEL.

1 2

Press TOP MENU during playback. Title menu appears on the screen.

Press ENTER or PLAY. The playback of the selected title will start.

Press

to select the desired title.

Play Mode
Mode Repeat : Program : Off 1 2 3 9

Program Playback

Note: Depending on the DVD, you may not be able to select the title. Depending on the DVD, a title menu may simply be called a menu or title in the instructions supplied with the disc.

DVD menu
Some DVDs allow you to select the disc contents using the menu. When you playback these DVDs, you can select the subtitle language, soundtrack language, etc, using the menu.

CD VCD

Random playback
Press PLAY MODE during playback or stop mode.

1 2

Press PLAY. The Random Playback will start. If you set Random during playback mode, Random playback will begin after the track that is currently being played has ended. To resume normal playback, select Mode: Off in step 2.

1 2

Press DVD MENU during playback. The DVD menu appears on the TV screen. Press DVD MENU again to resume playback at the scene when you pressed DVD MENU. Press / / / to select the desired item.

Press ENTER. The menu continues to another screen. Repeat steps 2 and 3 to set the item completely.

Press / to select Mode, then press ENTER repeatedly to select Random.


Play Mode
Mode Repeat : Random : Off 1 2 3

Note: Depending on the DVD, you may not be able to resume playback from the scene point when you press DVD MENU.

Program Playback

50
J50S0101A.indb 50

Note: In case of Video CD with PBC, you cannot set Random function during playback. The random playback is cancelled when you eject the disc or turn the power off.

51
J50S0101A.indb 51 1/19/08 2:42:05 PM

1/19/08 2:42:03 PM

Advanced playback

Changing soundtrack language/Subtitles

AUDIO SELECT SUBTITLE

Disc status/To turn off the PBC


DISPLAY PLAY MODE
/

ENTER
DVD VCD

Changing soundtrack language

Subtitles

DVD VCD

Disc status

VCD

To turn off the PBC

(see page 8)

You can select the language when you play a multilingual disc. When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off.

With press of DISPLAY, the status of the disc will appear on the screen. To cancel the display, press DISPLAY again.

1 2

Press PLAY MODE in the stop mode.

1 2

Press AUDIO SELECT during playback. The current soundtrack language will appear.
1/2 Eng Dolby Digital

1 2

Press SUBTITLE repeatedly during playback until the desired language is selected.
1/5 Eng

Press / to select Mode, then press ENTER repeatedly until Off appear.
Play Mode
Mode Repeat : Off : Off 1 2 3

DVD
DISC OPERATION

ELAPSED TIME

TOTAL TIME

Press AUDIO SELECT repeatedly until the desired language is selected.


2/2 Fre Dolby Digital

To turn off the subtitle, press SUBTITLE until Off appears.


Off

Program Playback

TITLE NO.

DVD Title 1/3 1/1 Eng Dolby Digital 1/1

00:15:25 01:41:39 Chapter 2/24 1/2 Eng

CHAPTER NO.

Advanced playback

ANGLE NO.

SUBTITLE LANGUAGE A KIND OF AUDIO

Press PLAY MODE again to clear the screen.

The on screen display will disappear after a few seconds. In case of Video CD playback Audio type changes as follows each time you press AUDIO SELECT.
LR L R

The on screen display will disappear after a few seconds. Note: Depending on the DVD, you may not be able to change subtitles, or to turn subtitles on or off. While playing a DVD, the subtitle may change when you loaded or eject the disc. In some cases, a selected subtitle language may not be changed immediately.

AUDIO LANGUAGE

To turn on the PBC


Follow the above steps 1~2, then press ENTER repeatedly until PBC appear.
ELAPSED TIME TOTAL TIME

Video CD
DISC OPERATION

VCD Track 3/15

00:08:32 00:51:03

Note:

If the desired language is not heard after pressing the button several times, the language is not recorded on the disc. The selected soundtrack language is cancelled when you eject the disc. The initial default language or available language will be heard if the disc is played back again. If you select DTS in playing DTS-encoded disc, no sound will be heard from the TV/DVD speakers. s

TRACK NO.

52
J50S0101A.indb 52 1/19/08 2:42:06 PM J50S0101A.indb 53

53
1/19/08 2:42:07 PM

Advanced playback

MP3/WMA/JPEG/DivX and Audio CD operation


This unit can playback the MP3/WMA/JPEG/DivX-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA/JPEG/DivX-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG/DivX-encoding Software (not supplied). The Apple-HFS-System cannot be played. This player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality. There are many different types of recordable disc formats (including CD-R containing MP3/WMA les). Not all recordable discs will produce optimal playback quality. The technical criteria set forth in this owner manual are meant only as a s guide. Use of CD-RW for MP3 les is not recommended. You must obtain any required permission from copyright owners to download or use copyrighted content. Toshiba cannot and does not grant such permission.
CD

/ / / ENTER STOP PLAY RETURN TOP MENU

MP3/WMA and Audio CD playback


Load an Audio CD or a disc on which MP3 or WMA les have been recorded in the disc slot.
A le browser screen will appear on the screen.
Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA-2 WMA-3
Select Files Repeat :Off Mode :Off

CD

Audio CD/MP3/WMA/JPEG/DivX CD information

Limitations on MP3/WMA/JPEG/DivX CD playback MP3/WMA/JPEG/DivX CD is the disc that is standardized by ISO9660, its le name must include 3-digits extension letters, .mp3, .wma, .jpg, .div, .divx, .avi. MP3/WMA/JPEG/DivX CD must be correspond to the ISO standardized les. This unit can read 2000 les per disc. If one disc has more than 2000 les, it reads up to 2000 les, the remaining les will be omitted. MP3/WMA/JPEG/DivX CDs cannot be used for the purpose of recording. If the CD has both audio tracks and MP3/WMA/JPEG/DivX les, only audio tracks will be played. It may take more than one minute for this unit to read MP3/WMA/JPEG/DivX les depending on its structure. Music recorded by Joliet Recording Specication can be played back, the le name is displayed (within 15 letters) on the screen. Long le names will be condensed. The music les recorded by Hierarchical File System (HFS) cannot be played. Limitations on display The maximum number for display is 15 letters. Available letters for display are the following: capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score). Other letters than those above are replaced in hyphen. Notes on MP3/WMA/JPEG/DivX les To playback MP3/WMA/JPEG/DivX CD in the recorded order, 1. Use MP3/WMA/JPEG/DivX software that records data alphabetically or numerically. 2. Name each le including two-digit or three-digit number (ex. 01 02 or 001 002). 3. Refrain from making too many sub-folders. CAUTION: Some MP3/WMA/JPEG/DivX CDs cannot be played back depending on the recording conditions. The CD-R/RW that has no music data or non MP3/WMA/JPEG/DivX les cannot be played back. Standard, sampling frequency and the bit rate: MP3 CD MPEG-1 Audio 32kHz, 44.1kHz, 48kHz 32kbps ~ 320kbps (constant bit rate or variable bit rate) The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of constant bit rate. WMA CD WMA version 7 and 8 32kHz/48kbps, 44.1kHz/48kbps~192kbps, 48kHz/128kbps~192kbps The le recorded by mono, 48kHz, 48 kbps is not available to this unit. DivX video DivX version: DivX 3, 4, 5, and 6 (specically 3.1.1, 4.1.2, 5.0.2, 5.0.5, 5.1.1, 5.2.1, 6.0 at Home Theater prole). Audio format: MPEG1 Layer2 (MP2), MPEG1 Layer3 (MP3) Sampling frequencies: 32kHz, 44.1kHz, 48kHz Bit rate: 32kbps ~ 320kbps Resolution: Max 720 x 576 (at 25fps), Max 720 x 480 (at 30fps) Microsoft, Windows Media, and Windows Logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. DivX, DivX Certied, and associated logos are trademarks of DivX, Inc. and are used under license.

1 2 3

About le menu

3/15 00:00:00 /WMA-11.WMA

JPEG Preview

Press

to select le.
/MP3-2.MP3

MP3-5 MP3-6 WMA-11 WMA-12 Picture-1 Picture-2 Movie-1 Movie-2

Select Files Repeat Mode :Off :Off

Music Playing

Advanced playback

Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA-2 WMA-3

Select Files Repeat Mode :Off :Off

JPEG Preview

In case the current directory includes more than 8 les, press or to scroll in the le list. To see contents in folder, select the folder and then press ENTER. To return to the parent directory, press RETURN or select Go Up ... then press ENTER. When PLAY is pressed after the le browser displayed, playback begins automatically starting from the rst le. In this case, if the rst le is an MP3/WMA le, only MP3/WMA les are played back in order. If the rst le is a JPEG le, the rst JPEG le is played back. If the rst le is a DivX le, the rst DivX le is played back. If there is no le at a root directory, playback does not begin automatically.

Note: In the case of a CD containing a mixture of MP3, WMA, JPEG and DivX les, the les are played back by selecting them from the le browser. MP3 or WMA le on the Kodak Picture CD is not recognized on this unit.

Note: During MP3/WMA playback, you cannot use Jump and A-B Repeat functions. You can use Repeat (Track or All), Random functions and Program playback for Audio CD/MP3/WMA/JPEG/DivX playback 58 59 .

4 5

Press ENTER. The selected le starts playing back.

Press STOP to end playback.

Select Files The le type to make it display in the le browser can be chosen. 1.Press or to highlight Select Files at right column in the le browser. 2. Press ENTER, then press or to select le type from the list (Music, Picture or Movie). 3. Press ENTER to add/remove check mark. Checked le type will be displayed in the le browser. 4. Press RETURN to save the setting.

The unit records the stopped point. appears on the TV screen. Press PLAY to resume playback (from the scene point). If you press STOP again or unload the disc, the unit will clear the stopped point.

54
J50S0101A.indb 54 1/19/08 2:42:07 PM J50S0101A.indb 55

55
1/19/08 2:42:08 PM

Advanced playback Advanced playback

MP3/WMA/JPEG/DivX and Audio CD operation (Continued)

ZOOM DVD MENU ENTER / / / PAUSE STOP PLAY SKIP ANGLE TOP MENU
CD

ENTER / STOP PLAY

CD

JPEG playback
Load a JPEG disc in the disc slot.

CD

Slide show playback

DivX playback
Load a disc on which DivX les have been recorded in the disc slot. A le browser screen will appear on the TV screen.
/Movie-01.DIVX Movie-01 Movie-02 Movie-03 Movie-04 Movie-05 Movie-06 Movie-07 Movie-08
Select Files Repeat Mode :Off :Off

CD

Playing DivX VOD content

1 2 3

The slide show enables you to view pictures (les) one after another automatically. Preparation: Set JPEG Interval setting to 5 Seconds, 10 Seconds or 15 Seconds 63 .
Select Files Repeat Mode :Off :Off

A le browser screen will appear on the screen.

/Picture-01.JPG

Picture-01 Picture-02 Picture-03 Picture-04 Picture-05 Picture-06 Picture-07 Picture-08

1 2 3

DivX VOD content is protected by DRM (Digital Rights Management) system. This restricts playback of content to specic registered devices. If the incorrect DRM le is loaded, Authorization View DivX VOD Rental Error This player is not This rental has 5 views left. authorized to play this Do you want to use one of your 5 views now? video. will appear on the screen. Yes No When you attempt to play DivX VOD, the number of plays is limited and the right message will appear on the screen. If you wish to play it, select Yes. If the number of plays goes over the limit, then Rental Expired will be displayed. In this case, the le will not be played. Note: In order to play DivX VOD content on this unit, you rst need to register the unit with registration code. See page
64 .

JPEG Preview
W: 2048 H: 1536

Press / to select the le. To display a thumbnail list, press DVD MENU. Press / / / to select the desired le. (To return to the le browser, press TOP MENU.)

1 2

Select your desired starting le for the slide show in the step 3 on left. Press ENTER or PLAY to start slide show from the selected le.
Press / to select le.

JPEG Preview

Advanced playback

If you press PAUSE during the slide show, the slide

When PLAY is pressed after the le browser displayed, playback begins automatically starting from the rst le. In this case, if the rst le is a JPEG le, the rst JPEG le is played back. If the rst le is a DivX le, the rst DivX le is played back. If the rst le is an MP3/WMA le, only MP3/WMA les are played back in order. If there is no le at a root directory, playback does not begin automatically.

show stops temporary. appears briey on the TV screen. Press PLAY or SKIP again to resume the slide show. If the picture appears upside down or sideways, press ANGLE repeatedly until it right side up. s , , or appears on the TV screen.
When the slide show playback nished, the le list

appears.
To stop the slide show, press STOP. The le browser

appears. Note: During JPEG playback, you cannot use Jump and A-B Repeat functions. When an image exceeds 5760 x 3840 pixels, the entire image may not be displayed on a screen, preview window or thumbnail list. It may have a longer interval due to the size of data.

When PLAY has been pressed after the le browser displayed, playback begins automatically starting from the rst le. In this case, if the rst le is a JPEG le, the rst JPEG le is played back. If the rst le is a DivX le, the rst DivX le is played back. If the rst le is an MP3/WMA le, only MP3/WMA le are played back in order. If there is no le at a root directory, playback does not begin automatically.

Depending on the recording conditions of DivX le, you may not be able to use FF, REV or JUMP function.

Press ENTER or PLAY. The selected picture appears on the screen.

4 5

Press ENTER or PLAY. The selected DivX movie will be played back on the TV screen.

Rotating an image You can rotate an image by 90 degrees. Press ANGLE during playback of the image. , , or appears on the screen. Zooming an image Zoom function also can be used in viewing JPEG les. Press ZOOM (See Zooming 47 ).
Press STOP to end playback. The unit records the stopped point. appears on the TV screen. Press PLAY to resume playback (from the scene point). If you press STOP again or un load the disc, the unit will clear the stopped point. To want to watch the other le, repeat steps 3 ~ 4.

5
56

Press STOP to end playback. The le browser appears on the screen. If you want to watch the other le, repeat steps 3 ~ 4.

57
1/19/08 2:42:10 PM

J50S0101A.indb 56

1/19/08 2:42:09 PM

J50S0101A.indb 57

Advanced playback

Repeat, random and program playback using file browser


/ / / ENTER PLAY SKIP / / / / ENTER PLAY

CD

Repeat playback (Audio CD/ MP3/WMA/JPEG/DivX)


In the le browser, press / / Repeat during stop mode. / to select

CD

Random playback (Audio CD/ MP3/WMA/JPEG/DivX)


In the le browser, press / Mode during stop mode. / / to select

CD

Program playback (Audio CD/MP3/WMA/JPEG/DivX )


In the le browser, press / / / Edit Mode, then press ENTER. to select

Press / to select Program View, then press ENTER. Program View shows only the programmed les that you have added in step 2.
MP3-1 MP3-2 MP3-3 WMA-3
Edit Mode Browser View Clear Program

Folder-1 Folder-2 MP3-1 MP3-2 MP3-3

Select Files Repeat Mode :Off :Off

Folder-1 Folder-2 MP3-1 MP3-2 MP3-3

Select Files Repeat :Off Mode :Off

Folder-1 Folder-2 MP3-1 MP3-2 MP3 3

Repeat Mode

:Off :Off

Edit Mode

When Edit Mode is black color, you can mark the les which you want to add into Program list.

JPEG Preview

Program View

Press ENTER repeatedly to select Track or All.

Press ENTER to select Random.

Advanced playback

2
Folder-1 Folder-2 MP3-1 MP3-2 MP3-3
Select Files Repeat :Off Mode :Random

Press / / / to select le you want to add into the program list.


Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA 2 JPEG Preview
Repeat Mode :Off :Off

Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA-2

Edit Mode Program View Add To Program

Folder-1 Folder-2 MP3-1 MP3-2 MP3 3

Select Files Repeat Mode :Track :Off

Edit Mode

JPEG Preview

Browser View

WMA-3

Press PLAY. The unit automatically starts repeat playback after nishing the current track.

Press PLAY. The random playback will start.

Press ENTER. Selected le was marked. Repeat this procedure to select the other les.

In the Program View, press PLAY. The les start to playback in programed order that were added by you.

To resume normal playback Select Repeat : Off in step 2. Note:


The repeat function is cancelled when you eject the disc or turn the power off. or Track repeat function is canceled whenever SKIP is pressed. The function of A-B Repeat can be used for DivX CD. See A-B Repeat playback 49 .

To resume normal playback Select Mode : Off in step 2. Note:


The random function is cancelled when you eject the disc or turn the power off.

Press / / / to select Add To Program. Then press ENTER. All marked les are added into the program list.
Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA 2
Edit Mode Program View Add To Program

To remove le from program list in stop mode In the Edit Mode, switch to Program View. Select le you want to remove, then press ENTER. Select Clear Program and press ENTER. Marked le is removed from program list. Note: The program function is cancelled when you eject the disc
or turn the power off.

JPEG Preview

When you nish storing the les which you want into the Program list, select Edit Mode and press ENTER to release edit mode.

58
J50S0101A.indb 58 1/19/08 2:42:11 PM J50S0101A.indb 59

59
1/19/08 2:42:12 PM

Function setup

Customizing the function settings


You can change the default settings of the DVD mode to customize performance to your preference. Press TV/DVD on the remote control to select DVD mode.

TV/DVD

/ / / ENTER SETUP RETURN


DVD VCD CD

Setting procedure

Setting details

Press SETUP during stop mode. The following on-screen display appears.
Menu E.B.L. DRC Parental : English Off

Then press or ENTER. The selectable settings will appear.


TV Screen Menu DRC Parental : 4:3 English Off 4:3 Display SubtitleSet Password QSound : English On 16:9 Picture Audio Output Mode : Auto English Interlace JPEG Interval : Off DivX(R) VOD

Section

Option
Menu Subtitle Audio TV Screen Display

Details
To select the language of Menu, Subtitle and Audio if more than one language are available on the disc. To select a picture size according to the aspect ratio of your TV. To turn On or Off the operational status display on the TV screen. To select a preferred picture mode from Video, Film or Auto. To select a preferred setting for the slide show playback.

Page

62

SubtitleSet TV Screen Password QSound : On English 4:3 Audio Display Output : Interlace English On

Picture Mode : Auto DivX(R) VOD JPEG Interval Screen Saver : 5 Seconds : On

62

Press press

or to select the desired section, then or .


TV Screen Menu DRC Parental : English Off 16:9

Change the selection using or , by referring to the corresponding pages 61 ~ 64 . Press ENTER to save the setting.
Repeat steps 3, 4 and 5 to

Picture Mode JPEG Interval

63

Display SubtitleSet Password QSound : English On Picture Audio Output Mode : Auto English Interlace

Night Mode Digital Out


Parental

To select On or Off for Night Mode. To select a digital output sound format corresponding to your system connection.
To select a preferred parental level for the parental setting. To change the password. To display your 8-character registration code.

change other option.


To select another section, go

JPEG Interval : Off DivX(R) VOD

63
Function setup

back to step 2 by pressing repeatedly.

First option will be highlighted. Press to select the desired option.


TV Screen Menu DRC Parental

or

To clear SETUP screen, press SETUP once or press RETURN repeatedly.

Password DivX(R) VOD

64

: English Off 16:9

Display SubtitleSet Password QSound : English On Picture Audio Output Mode : Auto English Interlace

JPEG Interval : Off DivX(R) VOD

60
J50S0101A.indb 60 1/19/08 2:42:13 PM J50S0101A.indb 61

61
1/19/08 2:42:14 PM

Function setup

Customizing the function settings (Continued)

Setting details
Menu E.B.L. DRC Parental : Off English TV Screen Menu DRC Parental : 16:9 Off English

Setting details (continued)


Picture Mode
Night E.B.L. Menu Mode Parental : Off English

SubtitleSet TV Screen Password QSound : 4:3 English On Audio Display Output : On Interlace English

Display SubtitleSet Password QSound : On English Picture Audio Output Mode : Auto Interlace English

Picture Mode : Auto DivX(R) VOD JPEG Interval Screen Saver : 5 Seconds : On

JPEG Interval : Off DivX(R) VOD

There are two types of source content in pictures recorded in DVD video discs: lm content (pictures recorded from lms at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed. Auto: Select this selection normally. The DVD player automatically detects source content, lm or video of playback source, and converts that signal in an appropriate method. The DVD player converts lm content pictures appropriately. Suitable for playback of lm content pictures.
Night Mode

Digital Out TV Screen Password Subtitle Set : Bitstream English 4:3 Display Audio Output : On Interlace English

Picture Mode VOD DivX(R) : Auto JPEG Interval Screen Saver : 5 Seconds : On

Menu, Subtitle, Audio You can select the language of Menu, Subtitle and Audio if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen. Other: Other language can be selected (see Language code list 69 ). Original (Audio): The unit will select the rst priority language of each disc. Off (Subtitle): Subtitles do not appear.
Note: If the selected language is not recorded on the disc, the rst-priority language is selected. If you want to change the OSD language, you can perform it by Language in the TV menu 22 .

TV Screen You have the following screen sizes to choose from: 4:3 (Letter box): When playing back a wide screen-DVD disc, it displays the wide picture with black bands at the top and bottom of screen. (Pan & scan): 4:3 It displays the wide picture on the whole screen with left and right edges automatically cut off. 16:9 (Wide): A wide screen picture is displayed full size.
Note: If the DVD disc is not formatted in the Pan & scan style, it will display 4:3 style.

Night Mode enables you to control the dynamic range so as to achieve a suitable sound for your equipment. Off: It plays back at the recording level on the disc. On: Loud sound such as explosion is toned down slightly when played back. This is suitable when it is connected to a stereo. Note: This function works only when the disc recorded with Dolby Digital is played back. The level of Night Mode may differ depending on DVD video disc.

Film:

Function setup

Video: The DVD player lters video signal and converts it appropriately. Suitable for playback of video content pictures.
Note: Depending on the disc, pictures may be cut off or doubled. In this case, select Video.

Digital Out You can select the digital output sound format corresponding to your system connection. Off: There is no sound output from DIGITAL AUDIO OUT jack. PCM: Change Dolby Digital to PCM for the output. Select when connected to a 2 channel digital stereo amplifier. Bitstream: Disc audio bitstream data will be output. Note: Even if you select Bitstream, MPEG Audio will be output in PCM format.

JPEG Interval You can continuously playback all JPEG les automatically. After the selection below, the disc will start playback on JPEG les which have been recorded. Off: Plays back one le at a time. 5 Seconds: Plays back images in the form of a slide show at 5 second intervals. 10 Seconds: Plays back images in the form of a slide show at 10 second intervals. 15 Seconds: Plays back images in the form of a slide show at 15 second intervals.

Display On screen display can be switched on or off when you press any buttons. Off: On screen displays do not appear when you press any buttons. On: On screen displays appear when you press the buttons (factory setting).

62
J50S0101A.indb 62 1/19/08 2:42:15 PM J50S0101A.indb 63

63
1/19/08 2:42:15 PM

Function setup EJECT

Customizing the function settings (Continued)

Temporary cancel the rating level by DVD disc


Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not.

09

ENTER

RETURN

Setting details (continued)


Parental E.B.L. Menu DRC Password TV Screen Subtitle QSound DivX(R) Display Audio VOD Picture Mode JPEG Interval Screen Saver : English Off : 4:3 Change English On : Display On English : Auto : 5 Seconds : On

DVD

Temporary cancel the rating level by DVD disc


Note:

the new password Set

Parental control setting Some discs are specied as not suitable for children. Such discs can be limited not to playback with the unit. 1) Press or to select Parental, then press ENTER. Enter Password screen will appear. 2) Press 0000 using Number buttons (09). (Please note, this is pre-setting password of this unit). Then press ENTER. The parental level list will appear. Level Off: The parental control setting does not function. Level 8: Virtually all DVD software can be played back. Level 1: DVD software for adults cannot be played back. 3) Press or to select from the level 1 to level 8. The limitation will be more severe as the level number is lower. Then press ENTER. Note: The parental control level is equivalent to the following USA movie ratings. Level 1: G Level 2: Level 3: PG Level 4: PG-13 Level 5: Level 6: R Level 7: NC-17 Level 8:

1) Press or to select Password, then press ENTER. Enter Current Password screen will appear. 2) Press Number buttons (09) to input the current password (If the password has not been set yet after you purchase this unit, it is 0000). 3) Then press ENTER. Enter New Password screen will appear. Press Number buttons (09) to input the new password. 4) Press ENTER. Now your new password has been set. Be sure to remember this number! If you forget the password 1) Press EJECT to remove the disc. 2) While holding 7 down on the remote control and then press STOP on the unit. Password Clear appears on the screen. Now the password has been returned to the initial value (0000).

Load a DVD disc.

This temporary cancellation of rating level will be kept until the disc is ejected. When the disc is ejected, the original rating level will be set again automatically.

2 3

If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the Reading screen will change, depending on which disc is played. If you select YES with the ENTER key, password input screen will then appear. If NO is selected, press EJECT to remove the disc. Enter the password with Number buttons (09). Then press ENTER. To exit from the entry, press RETURN.
Enter Password

Function setup

DivX VOD

In order to play DivX VOD (Video On Demand) content on this unit, you rst need to register the unit with your DivX VOD content provider. You do this by generating a DivX VOD registration code, which you submit to your provider. Press or to select DivX(R) VOD. Then press ENTER. Your 8-character registration code is displayed. Make a note of the code as you will need it when you register with a DivX VOD provider. Then press ENTER to select Done.
Note:

The parental control levels for other countries/area than U.S. are included for future use. Check the appropriate parental control level when you buy a DVD video disc equipped with the parental control feature in the future. Depending on the discs, the unit cannot limit playback. Some discs may not be encoded with specic rating level information though its disc jacket says adult. For those discs, the age restriction will not work. The password is required every time when you change the parental level. If you input a wrong number, press EXIT/CANCEL.

If each setup (pages 62 ~ 64 ) has completed, the unit can always work under the same condition (especially with DVD discs). Each setup will be retained in the memory even if you turn the power off.

Playback will commence if the entered password is correct.

64
J50S0101A.indb 64 1/19/08 2:42:16 PM J50S0101A.indb 65

65
1/19/08 2:42:16 PM

Others

Understanding the Power Return feature


If the power is cut off while you are viewing the TV/DVD and the power is resupplied, the Power Return feature will turn the TV/DVD on automatically. If the power is going to be off for a long time or you are going to be away from the TV/DVD for a long time, unplug the power cord from the wall outlet to prevent the TV/DVD from turning on in your absence.

Troubleshooting
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units.

SYMPTOMS DVD Playback doesn start. t No picture. No sound. 20 Picture is distorted during fast reverse/forward playback. 26 26, 27 68 26 14, 15 68 36 26 14 68 26 23 36 14, 15 68 26 23 14, 15 15 23 26 14, 15 68 23 14 43 27 26 14, 15 34 22 Stopping playback, search, slowmotion play, repeat play, or program play, etc. cannot be performed. No on-screen display. The unit or remote operation key is not functioning. Playback does not start when the title is selected. Audio soundtrack and/or subtitle language is not changed when you playback a DVD. No subtitle. Angle cannot be changed. appears on the screen. REMOTE CONTROL

POSSIBLE SOLUTIONS No disc is loaded. The disc may be dirty. Clean up the disc. The unit cannot play CD-ROMs, etc. TV/DVD selector is not set correctly. Check the input selector of the amplier is set properly. The unit is in the special playback mode. Select the correct Audio Input/Output position on AV amplier. The picture will be distorted occasionally.

PAGE 44 7 8 44 46 18, 19 -

SYMPTOMS POWER TV/DVD does not operate. TV BROADCAST RECEPTION Poor sound or No sound.

POSSIBLE SOLUTIONS Make sure the connection of AC cord is secured. Try another AC outlet. Unplug unit, then plug it back in. Station or Cable TV may have problems, try another station. Check Volume adjustments or mute. Check for sources of possible interference. Station or Cable TV may have problems, try another station. Check antenna or Cable TV connections, reorient antenna. Check for sources of possible interference. Check Picture setting. Station or Cable TV may have problems, try another station. Station signal is weak, reorient antenna to receive weaker station. Check for sources of possible interference. Station or Cable TV may have problems, try another station. Make sure channels are set into memory. Check Picture setting. Check antenna or Cable TV connections, reorient antenna. Check for sources of possible interference. Station or Cable TV may have problems, try another station. Make sure channels are set into memory. Cable TV company is scrambling signal. Check antenna or Cable TV connections, reorient antenna. Check all Cable TV connections. Set Air/Cable selection to the Cable position. Station or Cable TV system problems, try another station. Check antenna or Cable TV connections, reorient antenna. Check for sources of possible interference. Make sure Air/Cable selection is in the appropriate position. If antenna is used, check UHF antenna connections. Auto shut off feature worked. Sleep Timer is set. Power interrupted. TV station experiencing problems or program tuned is not closed captioned. Try another channel. Check Cable TV connection or VHF/UHF antenna, reposition or rotate antenna. Set CC Setting to On to turn on the closed caption decoder. Select proper language in the menu options.

PAGE

Some discs may not do some of the functions.

Poor picture or No picture.

Set Display to On. Turn off the unit and unplug the AC power cord for several minutes, then replug it. Check the Parental setup.

62 64

Poor reception on some channels.

Multilingual language is not recorded on the DVD disc. Some discs have no subtitles. Subtitles are cleared. Press SUBTITLE. Multi-angles are not recorded on the DVD disc. The function is prohibited with the unit or the disc. Aim the remote control at the remote sensor. Operate within approx. 5 meters or reduce the light in the room. Clear the path of the beam. The batteries are weak. Replace the batteries. Check the batteries are inserted correctly.

52

Poor color or no color.

Others

52 51 46

Picture wobbles or drifts.

No CATV reception. Horizontal or diagonal bars on screen. No reception above channel 13.

The remote control does not function.

13

TV shuts off.

Closed - Caption is not activated.

Display is not shown in your language.

66
J50S0101A.indb 66 1/19/08 2:42:17 PM J50S0101A.indb 67

67
1/19/08 2:42:18 PM

Others

Others

Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.

Language code list


Enter the appropriate code number for the initial settings Menu, Subtitle and/or Audio 62 .

Language Name Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir

Code 1112 1111 1116 2927 1123 1128 1835 1129 1135 1136 1211 1531 1224 1436 1218 1228 1217 2335 1215 2123 1311 3618 1325 1828 1329 1411 2422 1524 1525 1530 1625

Language Name Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish

Code 1620 1619 1628 1635 1722 2111 1415 1522 2122 1724 1731 1811 1933 1819 1831 1929 1924 1911 1711 1930 2011 2033 2124 2129 2121 2135 2125 2131 2225 2211 2232

Language Name Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Quechua Rhaeto-Romance Romanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi

Code 2224 2230 2321 2317 2329 2322 2330 2319 2328 2325 2324 2411 2415 2425 2528 2611 2629 1611 2622 2630 2731 2823 2825 2831 2923 2911 1714 2928 2918 2924 2914

Language Name Singhalese Slovak Slovenian Somali Spanish Sundanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapk Welsh Wolof Xhosa Yiddish Yoruba Zulu

Code 2919 2921 2922 2925 1529 2931 2933 2932 3022 3017 3011 3030 3015 3018 1225 3019 3025 3028 3021 3033 3121 3128 3136 3219 3225 1335 3325 3418 2019 3525 3631

IGNITION
Black spots or horizontal streaks may appear, the picture may utter or drift. Usually caused by interference from automobile ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.

GHOSTS
Ghosts are caused by the television signal following two paths. One is the direct path and the other is reected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception.

Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian

SNOW
If the TV/DVD is located far from the TV station, in a fringe reception area where the signal is weak, small dots may appear in the picture. If the signal is extremely weak, the installation of a larger external antenna may be necessary.

Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese

Others

RADIO FREQUENCY INTERFERENCE (RFI)


Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and position of the antenna or installing an RFI lter may improve the picture.

CARE AND MAINTENANCE


To prevent re or shock hazard, disconnect the TV/DVD from the power source before cleaning. Use caution when cleaning or wiping the plastic parts.

68
J50S0101A.indb 68 1/19/08 2:42:18 PM J50S0101A.indb 69

69
1/19/08 2:42:19 PM

Others

Specifications
Model General Power supply Power consumption Weight Dimensions Operating temperature Operating humidity Television LCD panel (Screen size is approximate.) Display method Number of pixels Television system Receiving channels Antenna input Speaker Audio output power DVD/CD player Signal system Applicable disc Pickup Input/Output S-Video input ColorStream video input Video input Audio input (Y) 1.0 V (p-p), 75 negative sync., Mini DIN 4-pin x 1 , (C) 1.0 V (p-p), 75 (Y) 1.0 V (p-p), 75 negative sync., pin jack x 1 , (PB, PR) 0.7 V (p-p), 75 , pin jack x 2 1.0 V (p-p), 75 negative sync., pin jack x 1 , 8dBm, 50 k negative sync., pin jack (L/R) x 2 , HDMI compliant (type A connector), HDCP compliant, E-EDID compliant Suggested scan rates: 1080i, 480p, 720p HDMI Audio: 2-channel PCM, 32/44.1/48 kHz sampling frequency, 16/20/24 bits per sample MONITOR: Mini-Dsub 15pin x 1, AUDIO: 3.5 mm Stereo jack x 1 0.5 V (p-p), 75 pin jack x 1 , 3.5mm stereo mini jack x 1 NTSC 1. DVD (12cm, 8cm) 2. CD (12cm, 8cm) 1-Lens, 2-Beams System 19-inch diagonal Color TFT LCD 1440 (Horizontal) x 900 (Vertical) 1680 (Horizontal) x 1050 (Vertical) 22-inch diagonal AC 120V 60Hz Operation: 60 W, Stand by: 1 W 11.2 lbs (5.1 kg) Width: 18-9/16 inches (472 mm) Height: 15-13/16 inches (401 mm) Depth: 8-1/8 inches (207 mm) 5C-40C (41F-104F) Less than 80% RH (No condensation) Operation: 65 W, Stand by: 1 W 13.5 lbs (6.1 kg) Width: 21-1/8 inches (536.5 mm) Height: 17-5/16 inches (439.5 mm) Depth: 8-1/8 inches (207 mm) 19LV505 / 19LV506 22LV505

Limited United States Warranty LCD TV/DVD Combination - Depot Repair Warranty
Toshiba America Consumer Products, L.L.C. (TACP) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TV/DVD COMBINATION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.

LCD TV/DVD COMBINATIONS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES. LCD TV/DVD COMBINATIONS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.

NTSC standard, ATSC standard (8VSB), QAM VHF: 2-13 UHF: 14-69 CATV: 1-125 (4A, A-5~A-1, A~I, J~W, W+1~W+84) VHF/UHF 75 1-3/16 x 2-13/16 inches (30.5 x 71.1 mm), 8 x 2 1.5W + 1.5W

Limited One (1) Year Warranty on Parts and Labor TACP warrants this LCD TV/DVD Combination and its parts against defects in materials or workmanship for a period of one (1) year after the date of original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACP OPTION, S REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU. Rental Units The warranty for LCD TV/DVD Combination rental units begins on the date of the rst rental or thirty (30) days after the date of shipment to the rental rm, whichever comes rst. Commercial Units LCD TV/DVD Combinations sold and used for commercial purposes have a limited warranty for all parts and labor, which warranty begins on the date of original retail purchase and ends on the date that is ninety (90) days thereafter. Owner Manual and Product Registration Card s Read this owner manual thoroughly before operating s this LCD TV/DVD Combination. Complete and mail the enclosed product registration card or register your LCD TV/DVD Combination online at www.tacp.toshiba.com/service as soon as possible. By registering your LCD TV/DVD Combination you will enable TACP to bring you new products specically designed to meet your needs and help us to contact you in the unlikely event a safety notication is required under the U.S. Consumer Product Safety Act. Failure to complete and return the product registration card does not diminish your warranty rights.

Your Responsibility THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS: (1) You must retain your bill of sale or provide other proof of purchase. (2) All warranty servicing of this LCD TV/DVD Combination must be made by the Depot Warranty Repair Center specied by the TACP Consumer Solutions Center. (3) The warranties from TACP are effective only if the LCD TV/DVD Combination is purchased and operated in the Continental U.S.A. or Puerto Rico. (4) Labor service charges for set installation, setup, adjustment of customer controls, and installation or repair of antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems are your responsibility. (5) Warranties extend only to defects in materials or workmanship as limited above, and do not extend to any LCD TV/DVD Combination or parts that have been lost or discarded by you or to damage to the LCD TV/DVD Combination or parts caused by res, misuse, accident, Acts of God (such as lightning or uctuations in electric power), improper installation, improper maintenance, or use in violation of instructions furnished by TACP; use or malfunction through simultaneous use of this LCD TV/DVD Combination and connected equipment; or to units that have been modied or had the serial number removed, altered, defaced, or rendered illegible.

Others

HDMI input

PC input Digital audio output (Coaxial) Headphone Accessories

Remote control (19LV505/22LV505 : SE-R0305, 19LV506 : SE-R0316) ............................... 1 Batteries (R03/AAA) .............................................................................................................. 2 AC cord .................................................................................................................................. 1 Cleaning cloth .............................................................................. .......................................... 1 Owner manual (this booklet) ..................................................... .......................................... 1 s Quick setup guide (Spanish) .................................................................................................. 1

This model complies with the above specications. Designs and specications are subject to change without notice. This model may not be compatible with features and/or specications that may be added in the future.

70
J50S0101A.indb 70 1/19/08 2:42:19 PM J50S0101A.indb 71

71
1/19/08 2:42:20 PM

CAUTION
THIS LCD COLOR TELEVISION EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS SERVICE MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS LASER RADIATION EXPOSURE. TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM. Location of the required Marking The rating sheet and the safety caution are on the rear of the unit.

CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

PREPARATION OF SERVICING The laser diode used for a pickup head may be destroyed with external static electricity. Moreover, even if it is operating normally after repair, when static electricity discharge is received at the time of repair, the life of the product may be shortened. Please perform the following measure against static electricity, be careful of destruction of a laser diode at the time of repair. Place the unit on a workstation equipped to protect against static electricity, such as conductive mat. Soldering iron with ground wire or ceramic type is used. A worker needs to use a ground conductive wrist strap for body.

A1-1

19LV505/19LV506/22LV505

SERVICING NOTICES ON CHECKING


1. KEEP THE NOTICES
As for the places which need special attentions, they are indicated with the labels or seals on the cabinet, chassis and parts. Make sure to keep the indications and notices in the operation manual.

6. PERFORM A SAFETY CHECK AFTER SERVICING


Confirm that the screws, parts and wiring which were removed in order to service are put in the original positions, or whether there are the portions which are deteriorated around the serviced places serviced or not. Check the insulation between the antenna terminal or external metal and the AC cord plug blades. And be sure the safety of that.
(INSULATION CHECK PROCEDURE)

2. AVOID AN ELECTRIC SHOCK


There is a high voltage part inside. Avoid an electric shock while the electric current is flowing.

3. USE THE DESIGNATED PARTS


The parts in this equipment have the specific characters of incombustibility and withstand voltage for safety. Therefore, the part which is replaced should be used the part which has the same character. Especially as to the important parts for safety which is indicated in the circuit diagram or the table of parts as a mark, the designated parts must be used.

4. BE CAREFUL WITH THE LCD PANEL


Avoid a shock to the panel while servicing. Take enough care to deal with it.

1. Unplug the plug from the AC outlet. 2. Remove the antenna terminal on TV and turn on the TV. 3. Insulation resistance between the cord plug terminals and the eternal exposure metal [Note 2] should be more than 1M ohm by using the 500V insulation resistance meter [Note 1]. 4. If the insulation resistance is less than 1M ohm, the inspection repair should be required.
[Note 1]

If you have not the 500V insulation resistance meter, use a Tester.
[Note 2]

5. PUT PARTS AND WIRES IN THE ORIGINAL POSITION AFTER ASSEMBLING OR WIRING
There are parts which use the insulation material such as a tube or tape for safety, or which are assembled in the condition that these do not contact with the printed board. The inside wiring is designed not to get closer to the pyrogenic parts and high voltage parts. Therefore, put these parts in the original positions.

External exposure metal: Antenna terminal Headphone jack

HOW TO ORDER PARTS


Please include the following informations when you order parts. (Particularly the VERSION LETTER.) 1. MODEL NUMBER and VERSION LETTER The MODEL NUMBER can be found on the back of each product and the VERSION LETTER can be found at the end of the SERIAL NUMBER. 2. PART NO. and DESCRIPTION You can find it in your SERVICE MANUAL.

A1-2

19LV505/19LV506/22LV505

IMPORTANT SAFEGUARDS
1) 2) 3) 4) 5) 6) 7) 8) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

9)

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or S3126A plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such a vases, shall be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal. 17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock. 18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
PORTABLE CART WARNING (symbol provided by RETAC)

A1-3

19LV505/19LV506/22LV505

IMPORTANT SAFEGUARDS

(CONTINUED)

19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC-NATIONAL ELECTRICAL CODE S2898A POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. 22) Keep your fingers clear of the disc slot as it is closing. It may cause injury. 23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections. 24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage.

A1-4

19LV505/19LV506/22LV505

IMPORTANT SAFEGUARDS

(CONTINUED)

25) Do not allow the product to output distorted sound for an extended period of time. It may cause speaker overheating and fire. 26) When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage. 27) Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the laser beam. It may cause eye damage. 28) Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 29) This reminder is provided to call the cable TV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. CONDENSATION Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In such cases, change the location of the player. HOW TO HANDLE THE LCD PANEL Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur. If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation. If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

A1-5

19LV505/19LV506/22LV505

WHEN REPLACING DVD DECK


[ When removing the DVD Deck ] Before removing Pick Up PCB and DVD MT PCB connector, the short circuit the position shown in Fig. 1 using a soldering iron. If you remove the DVD Deck with no soldering, the Laser may be damaged.

[ When installing the DVD Deck ] Remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD MT PCB connector. NOTE Before your operation, please read PREPARATION OF SERVICING. Use the Lead Free solder. Manual soldering conditions Soldering temperature: 320 20oC Soldering time: Within 3 seconds Soldering combination: Sn-3.0Ag-0.5Cu When Soldering/Removing of solder, use the draw in equipment over the Pick Up Unit to keep the Flux smoke away from it.
Pick Up PCB

Short circuit using a soldering iron.

Fig. 1

A1-6

19LV505/19LV506/22LV505

DISC REMOVAL METHOD AT NO POWER SUPPLY


1. Remove the Back Cabinet and Angle Deck. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.) 2. Slide the Belt Loading toward the arrow direction by hand to release the lock. (Refer to Fig. 1) 3. Take out the Disc from the DVD Deck. Be careful not to scratch on the Disc. DVD Deck

Belt Loading

Fig. 1

PARENTAL CONTROL - RATING LEVEL


4 DIGIT PASSWORD CANCELLATION
If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps below. 1. 2. 3. 4. 5. 6. 7. 8. Turn Unit ON. Set the DVD to the Stop Mode. Check that No disc is displayed on the screen. Press and hold the STOP button on the side panel. Simultaneously press and hold the 7 key on the remote control unit. Hold both keys for more than 2 seconds. The On Screen Display message PASSWORD CLEAR will appear. The 4 digit password has now been cleared.

A1-7

19LV505/19LV506/22LV505

REMOTE CONTROL KEY CODE


NEC Format Custom Code : 40-BF H, 44-BB H, 45-BA H, 45-BC H No. Key Name Custom Code Key Code 1 EJECT 45 BA F5 2 TV/DVD 45 BC B3 3 SLEEP 40 BF 15 4 POWER 40 BF 12 5 1 40 BF 01 6 2 40 BF 02 7 3 40 BF 03 8 4 40 BF 04 9 5 40 BF 05 10 6 40 BF 06 11 7 40 BF 07 12 8 40 BF 08 13 9 40 BF 09 14 DISPLAY 40 BF 1C 15 0 40 BF 00 16 / JUMP 44 BB 9B 17 SUBTITLE 44 BB 87 18 CH UP 40 BF 1B 19 VOLUME + 40 BF 1A 20 AUDIO SELECT 44 BB 53 21 INPUT/ZOOM 40 BF 0F 22 CH DOWN 40 BF 1F 23 VOLUME 40 BF 1E 24 MUTE 40 BF 10 25 PLAY MODE 40 BF 1D 26 DVD MENU 40 BF 19 27 UP 44 BB 80 28 LEFT 44 BB 51 29 ENTER 44 BB 4E 30 RIGHT 44 BB 4D 31 DOWN 44 BB 81 32 MENU/SETUP 40 BF 0E 33 EXIT/CANCEL 44 BB EF 34 PAUSE 44 BB 10 35 PLAY 44 BB 15 36 STOP 44 BB 14 37 CH RTN/|<<SKIP 40 BF 17 38 <<REV 44 BB 19 39 FF>> 44 BB 13 40 CLOSED CAPTION/SKIP>>| 40 BF 57 41 <|SLOW 45 BA 0E 42 ANGLE 44 BB 96 43 MARKER 45 BA EC 44 SLOW |> 44 BB 0D 45 TOP MENU 44 BB DF 46 RETURN 44 BB 5D 47 REPEAT A-B 44 BB 5C 48 GAME 40 BF 28 49 PICTURE SIZE 40 BF 59
A1-8 19LV505/19LV506/22LV505

1 2 6 9 12 14 15 18 17 21 22 25 28 31 32 34 35 38 42 46 37 41 45 48 5 8 11

4 3 7 10 13 16 19 20 24 23 26 27 29 30 33 36 40 44 47 49 39 43

TABLE OF CONTENTS
GREEN PRODUCT PROCUREMENT LEAD-FREE SOLDER OWNER'S MANUAL
CAUTION ..................................................................................................................................... SERVICING NOTICES ON CHECKING .................................................................................... HOW TO ORDER PARTS .......................................................................................................... IMPORTANT SAFEGUARDS ..................................................................................................... WHEN REPLACING DVD DECK ............................................................................................... DISC REMOVAL METHOD AT NO POWER SUPPLY ............................................................ PARENTAL CONTROL-RATING LEVEL ................................................................................ REMOTE CONTROL KEY CODE .............................................................................................. TABLE OF CONTENTS ............................................................................................................. GENERAL SPECIFICATIONS ..................................................................................................... DISASSEMBLY INSTRUCTIONS 1.REMOVAL OF MECHANICAL PARTS AND P. C. BOARDS ............................................. 2.REMOVAL OF DVD DECK PARTS ..................................................................................... 3.REMOVAL AND INSTALLATION OF FLAT PACKAGE IC ................................................ SERVICE MODE LIST ................................................................................................................. SERVICING FIXTURES AND TOOLS ....................................................................................... RE-WRITE FOR DVD FIRMWARE ............................................................................................ WHEN REPLACING EEPROM (MEMORY) IC ......................................................................... ELECTRICAL ADJUSTMENTS .................................................................................................. TROUBLESHOOTING GUIDE ..................................................................................................... BLOCK DIAGRAMS DVD ........................................................................................................................................... POWER ..................................................................................................................................... POWER(DIGITAL PCB) .......................................................................................................... SIGNAL ..................................................................................................................................... PRINTED CIRCUIT BOARDS DVD MT ..................................................................................................................................... DIGITAL .................................................................................................................................... POWER/OPERATION/REMOCON ......................................................................................... SW ............................................................................................................................................. SCHEMATIC DIAGRAMS MPEG/MICON/DSP/RF_AMP ................................................................................................. MEMORY ................................................................................................................................... MOTOR DRIVE ......................................................................................................................... AUDIO/VIDEO .......................................................................................................................... MICON ....................................................................................................................................... SCALER .................................................................................................................................... TUNER ...................................................................................................................................... HDMI .......................................................................................................................................... LVDS .......................................................................................................................................... SCALER .................................................................................................................................... FLASH ....................................................................................................................................... DDR ........................................................................................................................................... JACK .......................................................................................................................................... AV SWITCH .............................................................................................................................. REGULATOR ........................................................................................................................... POWER ..................................................................................................................................... BACKLIGHT ............................................................................................................................. SOUND AMP ............................................................................................................................ JACK OUT ................................................................................................................................ SW ............................................................................................................................................. INTERCONNECTION DIAGRAM ................................................................................................ WAVEFORMS ............................................................................................................................... MECHANICAL EXPLODED VIEW .............................................................................................. DVD DECK EXPLODED VIEW ................................................................................................... MECHANICAL REPLACEMENT PARTS LIST ........................................................................... DVD DECK REPLACEMENT PARTS LIST .............................................................................. ELECTRICAL REPLACEMENT PARTS LIST ............................................................................ A1-1 A1-2 A1-2 A1-3~A1-5 A1-6 A1-7 A1-7 A1-8 A2-1 A3-1~A3-21 B1-1, B1-2 B2-1, B2-2 B3-1, B3-2 C-1 C-2 C-2 C-3, C-4 D-1~D-6 E-1~E-9 F-1, F-2 F-3, F-4 F-5~F-8 F-9~F-12 G-1~G-4 G-5~G-12 G-13~G-20 G-21 H-1, H-2 H-3, H-4 H-5, H-6 H-7~H-10 H-11~H-14 H-15, H-16 H-17, H-18 H-19~H-22 H-23~H-26 H-27~H-30 H-31, H-32 H-33, H-34 H-35~H-38 H-39~H-42 H-43~H-46 H-47~H50 H-51~H-54 H-55~H-58 H-59~H62 H-63, H-64 H-65~H-70 I-1, I-2 J1-1~J1-9 J2-1 K1-1~K1-3 K2-1~K2-3 K3-1~K3-15

A2-1

19LV505/19LV506/22LV505

GENERAL SPECIFICATIONS
G-1 TV System LCD LCD Size / Visual Size LCD Type Number of Pixels View Range Bright Dot Zero Bright Dot Ratio Color System Speaker Position Size Impedance Max 10%(Typical) 18.95 inch / 481.41mmV Color TFT LCD 1440(H) x 900(V) 80/80 degree 80/80 degree < n=0 -NTSC 2 Speaker Front 1.2 x 2.8 inch 8 ohm 1.5W + 1.5W --NTSC DVD, CDDVD-R/RW (Video Format Only) 120 mm , 80 mm DSM-2 4 step 2-45 times (DVD) 4-40 times (CD) 4 step 2-45 times (DVD) 4-40 times (CD) 1/7 -1/2 times -1/7 -1/2 times -US System M ATSC(8VSB)/QAM 1Tuner US (W/CABLE) 2~69, 4A, A-5~A-1, A~I, J~W, W+1~W+84 44.00MHz 45.75MHz 41.25MHz 4.50MHz No US-Stereo Yes 1 V p-p/75 ohm ------8.0dBm/50k ohm ---0.5 V p-p/75 ohm -------

Left/Right Up/Down

Sound Output G-2 DVD System Color System Disc Disc Diameter Drive Search speed

Fwd Actual Rev Actual

Slow speed

Fwd Actual Rev Actual

G-3

Tuning System

Broadcasting System Tuner and Receive CH CH Coverage Intermediate Digital Frequency Analog

Analog Digital System Destination

Picture(FP) Sound(FS) FP-FS

G-4

Signal

Preset CH Stereo/Dual TV Sound Tuner Sound Muting Video Signal Input Level Output Level S/N Ratio (Weighted) Horizontal Resolution at DVD Mode RGB Signal Audio Signal Output Level Input Level Output Level

at DVD at TV

Digital Output Level S/N Ratio at DVD (Weighted) Harmonic Distortion Frequency Response : at DVD at Video CD at SVCD at CD

A3-1

19LV505

GENERAL SPECIFICATIONS
G-5 Power Power Source Power Consumption Stand by (at AC) Energy Star Per Year Power Fuse Safety Circuit IC Protector(Micro Fuse) Safety Radiation Laser Operation Storage AC DC at AC at DC 120V, 60Hz -60W at 120V 60Hz -1W at 120V 60Hz Yes -- kWh/Year Yes Yes Yes UL(UL6500_2nd) FCC DHHS +5oC ~ +40oC -20oC ~ +60oC Less than 80% RH Yes 120 Min No No No No -Min Sec RC-LT Yes TOSHIBA TOSHIBA 40-BF h ,44-BB h ,45-BA h ,45-BC h 3V UM-4 x 2 pcs 49 Keys

Protector

G-6

Regulation

G-7 G-8 G-9

Temperature

G-10

Operating Humidity Clock (Only Broadcasting data) Clock and Sleep Timer Max Time Timer On Timer Program Off Timer Program Game Timer Wake Up Timer Timer Back-up (at Power Off Mode) more than Unit Remote Glow in Dark Remocon Control Remocon Format Format Custom Code Power Source Voltage(D.C) UM size x pcs Total Keys

A3-2

19LV505

GENERAL SPECIFICATIONS
Keys Power Eject Sleep TV/DVD 1 2 3 4 5 6 7 8 9 0 100 / Jump / Display Subtitle Audio Select Input Select / Zoom Mute CH Up CH Down Vol Up Vol Down Play Mode DVD Menu Up Down Left Right Enter Menu / Setup Exit / Cancel Game Picture Size Pause Play Stop Skip+ / Closed Caption Skip- / CH Return Search+ SearchSlow+ SlowAngle Maker Top Menu Return Closed Caption Repeat A-B Zoom/ Quick View Freeze frame Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes No No

A3-3

19LV505

GENERAL SPECIFICATIONS
G-11 Features Auto Shut Off Auto Search Power On Memory Comb Filter Game Position Auto Setup(Language/CH Program) Picture Setting(TV) Picture Preference Brightness , Contrast , Color Tint Sharpness Color Temperature DNR Cable Clear Picture Setting(PC) HOR Position , VER Position Phase, Clock Red, Green, Blue Auto Adjust Backlight Audio MTS Tone Control (Bass/Treble/Balance) Stable Sound Surround BBE SRS WOW (SRS 3D/Focus/Tru Bass) Variable Audio Out Tuning CH Program Air/Cable ADD/DELETE Label CH Label Video Label Favorite CH V-Chip Type RRT Setup Lock Hotel Lock Channel Lock Video Lock Panel Lock Menu Language Closed Caption CC Advanced Picture Size HD Zoom Picture Scroll Film Mode Aspect Backlight PFC(Power Factor circuit) Freeze frame PIP/POP Direct Input Selection Yes No Yes Yes 3 -D Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes No No No Yes Yes No No No No No Yes Yes Yes Yes Yes No Yes USA Type Yes No No No No English French Spanish Yes Yes Yes Yes No Yes Yes Yes No No No Yes

A3-4

19LV505

GENERAL SPECIFICATIONS
Digital Out Dolby Digital MPEG PCM DTS VGA (640x480) VGA (720x400) WVGA (848x480) SVGA (800x600) XGA (1024x768) WXGA (1280x768) WXGA (1280x720) WXGA (1360x768) SXGA (1280x1024) HDMI Input VGA (640480) 720480i (4:3) 720480i (16:9) 720480p (4:3) 720480p (16:9) 720576i (4:3) 720576i (16:9) 720576p (4:3) 720576p (16:9) 1280720p 19201080i CEC (ORION Standard) Deep Color xvYCC Component Input 720480i (4:3) 720480i (16:9) 720480p (4:3) 720480p (16:9) 720576i (4:3) 720576i (16:9) 720576p (4:3) 720576p (16:9) 1280720p 19201080i Size W x H(mm) Screw Size Yes No No No Yes Yes (60Hz) Yes (70Hz) No Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) No Yes Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) No No No No Yes (60Hz) Yes (60Hz) No No No Yes Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) No No No No Yes (60Hz) Yes (60Hz) Yes (100 x 100) M4 x 10 Yes No Yes Yes Yes Yes No Yes Yes Yes Yes Yes No Yes No Yes Yes 192kHz / 24bit

PC Monitor Input

Wall Mount Features (DVD) Video CD Playback SVCD Playback MP3 Playback JPEG WMA Divx Playback Digital Out

Down Mix Out Closed Caption Screen Saver TV Screen Audio DAC

DMF Support (Dolby Digital) (MPEG) (PCM) (DTS) (Dolby Digital) (DTS)

4:3 (Letter Box, Pan Scan) 16:9 (Wide)

A3-5

19LV505

GENERAL SPECIFICATIONS
G-12 Accessories Owner's Manual Remote Control Unit Rod Antenna Poles Terminal Loop Antenna Terminal U/V Mixer DC Car Cord (Center+) Guarantee Card Warning Sheet Circuit Diagram Antenna Change Plug Service Facility List Important Safeguard Dew/AHC Caution Sheet Quick Set-up Sheet(Spanish) Battery UM size x pcs OEM Brand AC Adapter AC Cord (for AC Adapter) AC Cord AV Cord (2Pin-1Pin) Registration Card (NDL Card) 300 to 75ohm Antenna Adapter Sheet Information (Return) Sheet Information (HDMI) Cleaning Cloth Switch Side Power (Tact) Channel Up/Menu Up/Play Channel Down/Menu Down/Stop Volume Up/Menu > Volume Down/Menu < Menu Play Eject Skip+, Search+ Skip-, SearchStill/Pause Stop Main Power SW Input Select/Enter Rear Main Power SW Indicator Power/Stand-By Power Wake Up On Timer -No No No No No No No No No Yes Yes UM-4 x 2 pcs No No No Yes No Yes No Yes(USA version) No Yes Yes Yes Yes Yes Yes Yes No (CH+ Alternative) Yes No No No No (CH- Alternative) No Yes No Yes (Green / Red) No No Language w/Guarantee Card English Yes Yes No --No

G-13

Interface

A3-6

19LV505

GENERAL SPECIFICATIONS
Terminals Rear Video Input 1 Audio Input 1 S - Input 1 Video Input 2 Audio Input 2 S - Input 2 Video Output Audio Output Component Input 1 Analog Audio Component Input 2 Analog Audio HDMI Input 1 Analog Audio HDMI Input 2 Analog Audio Sub Woofer Out PC Monitor Input Analog Audio Digital Audio Output DC Jack (Center +) VHF/UHF Antenna Input Video Input 3 Audio Input 3 S - Input 3 Other Terminal AC Inlet Approx. W x D x H (mm)
w/o Handle, Stand Approx. W x D x H (mm)

G-14 G-15

Set Size Weight

G-16

Carton

G-17

Material

G-18

Environment

Net (Approx.) Net w/o Handle, Stand (Approx.) Gross (Approx.) Master Carton Content Material Dimensions W x D x H(mm) Description of Origin Gift Box Material W/Color Photo Label W/Handle Dimensions W x D x H(mm) Description of Origin Drop Test Height (cm) Container Stuffing (40' container) w/Pallet w/Wrapping Cabinet Front Rear Jack Panel PCB Non-Halogen Demand Eyelet Demand Environmental standard requirement Pb-free Measures for Whisker

RCA x 1 RCA x 2(L/MONO, R) Yes No No No No No RCA x 3 RCA x 2(L/MONO, R) No No Yes PC Audio Input Alternative No No No Yes Mini Pin Jack( 3.5), STEREO Coaxial No F Type No No No Headphone Yes 472 x 207 x 401 472 x 67 x 364 5.1kg (11.2lbs) 4.4kg (9.7bs) 6.8kg (15.0lbs) No --- Sets --- / ------Double/Full Color No Yes 558 x 565 x 181 Yes 6 Surfaces 80 1088 Sets/40' container No No PC+ABS 94V0 NON-HALOGEN PS 94V0 NON-DECABROM -No Yes Green procurement of ORION Phase3(Phase3A) Yes

A3-7

19LV505

GENERAL SPECIFICATIONS
G-1 TV System LCD LCD Size / Visual Size LCD Type Number of Pixels View Range Bright Dot Zero Bright Dot Ratio Color System Speaker Position Size Impedance Max 10%(Typical) 18.95 inch / 481.41mmV Color TFT LCD 1440(H) x 900(V) 80/80 degree 80/80 degree < n=0 -NTSC 2 Speaker Front 1.2 x 2.8 inch 8 ohm 1.5W + 1.5W --NTSC DVD, CD-DA, DVD-R/RW (Video Format Only) 120 mm , 80 mm DSM-2 4 step 2-45 times (DVD) 4-40 times (CD) 4 step 2-45 times (DVD) 4-40 times (CD) 1/7 -1/2 times -1/7 -1/2 times -US System M ATSC(8VSB)/QAM 1Tuner US (W/CABLE) 2~69, 4A, A-5~A-1, A~I, J~W, W+1~W+84 44.00MHz 45.75MHz 41.25MHz 4.50MHz No US-Stereo Yes 1 V p-p/75 ohm ------8.0dBm/50k ohm ---0.5 V p-p/75 ohm -------

Left/Right Up/Down

Sound Output G-2 DVD System Color System Disc Disc Diameter Drive Search speed

Fwd Actual Rev Actual

Slow speed

Fwd Actual Rev Actual

G-3

Tuning System

Broadcasting System Tuner and Receive CH CH Coverage Intermediate Digital Frequency Analog

Analog Digital System Destination

Picture(FP) Sound(FS) FP-FS

G-4

Signal

Preset CH Stereo/Dual TV Sound Tuner Sound Muting Video Signal Input Level Output Level S/N Ratio (Weighted) Horizontal Resolution at DVD Mode RGB Signal Audio Signal Output Level Input Level Output Level

at DVD at TV

Digital Output Level S/N Ratio at DVD (Weighted) Harmonic Distortion Frequency Response : at DVD at Video CD at SVCD at CD

A3-8

19LV506

GENERAL SPECIFICATIONS
G-5 Power Power Source Power Consumption Stand by (at AC) Energy Star Per Year Power Fuse Safety Circuit IC Protector(Micro Fuse) Safety Radiation Laser Operation Storage AC DC at AC at DC 120V, 60Hz -60W at 120V 60Hz -1W at 120V 60Hz Yes -- kWh/Year Yes Yes Yes UL(UL6500_2nd) FCC DHHS +5oC ~ +40oC -20oC ~ +60oC Less than 80% RH No 120 Min No No No No -Min Sec RC-LT Yes TOSHIBA TOSHIBA 40-BF h ,44-BB h ,45-BA h ,45-BC h 3V UM-4 x 2 pcs 49 Keys

Protector

G-6

Regulation

G-7 G-8 G-9

Temperature

G-10

Operating Humidity Clock (Only Broadcasting data) Clock and Sleep Timer Max Time Timer On Timer Program Off Timer Program Game Timer Wake Up Timer Timer Back-up (at Power Off Mode) more than Unit Remote Glow in Dark Remocon Control Remocon Format Format Custom Code Power Source Voltage(D.C) UM size x pcs Total Keys

A3-9

19LV506

GENERAL SPECIFICATIONS
Keys Power Eject Sleep TV/DVD 1 2 3 4 5 6 7 8 9 0 Jump / Display Subtitle Audio Select Input Select / Zoom Mute CH Up CH Down Vol Up Vol Down Play Mode DVD Menu Up Down Left Right Enter Menu / Setup Exit / Cancel Game Picture Size Pause Play Stop Skip+ / Closed Caption Skip- / CH Return Search+ SearchSlow+ SlowAngle Maker Top Menu Return Closed Caption Repeat A-B Zoom/ Quick View Freeze frame Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes No No

A3-10

19LV506

GENERAL SPECIFICATIONS
G-11 Features Auto Shut Off Auto Search Power On Memory Comb Filter Game Position Auto Setup(Language/CH Program) Picture Setting(TV) Picture Preference Brightness , Contrast , Color Tint Sharpness Color Temperature DNR Cable Clear Picture Setting(PC) HOR Position , VER Position Phase, Clock Red, Green, Blue Auto Adjust Backlight Audio MTS Tone Control (Bass/Treble/Balance) Stable Sound Surround BBE SRS WOW (SRS 3D/Focus/Tru Bass) Variable Audio Out Tuning CH Program Air/Cable ADD/DELETE Label CH Label Video Label Favorite CH V-Chip Type RRT Setup Lock Hotel Lock Channel Lock Video Lock Panel Lock Menu Language Closed Caption CC Advanced Picture Size HD Zoom Picture Scroll Film Mode Aspect Backlight PFC(Power Factor circuit) Freeze frame PIP/POP Direct Input Selection Yes No Yes Yes 3 -D Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes No No No Yes Yes No No No No No Yes Yes Yes Yes Yes No Yes USA Type Yes No No No No English French Spanish Yes Yes Yes Yes No Yes Yes Yes No No No Yes

A3-11

19LV506

GENERAL SPECIFICATIONS
Digital Out Dolby Digital MPEG PCM DTS VGA (640x480) VGA (720x400) WVGA (848x480) SVGA (800x600) XGA (1024x768) WXGA (1280x768) WXGA (1280x720) WXGA (1360x768) SXGA (1280x1024) HDMI Input VGA (640480) 720480i (4:3) 720480i (16:9) 720480p (4:3) 720480p (16:9) 720576i (4:3) 720576i (16:9) 720576p (4:3) 720576p (16:9) 1280720p 19201080i CEC (ORION Standard) Deep Color xvYCC Component Input 720480i (4:3) 720480i (16:9) 720480p (4:3) 720480p (16:9) 720576i (4:3) 720576i (16:9) 720576p (4:3) 720576p (16:9) 1280720p 19201080i Size W x H(mm) Screw Size Yes No No No Yes Yes (60Hz) Yes (70Hz) No Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) No Yes Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) No No No No Yes (60Hz) Yes (60Hz) No No No Yes Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) No No No No Yes (60Hz) Yes (60Hz) Yes (100 x 100) M4 x 10 Yes No Yes Yes Yes Yes DMF Support (Dolby Digital) (MPEG) (PCM) (DTS) (Dolby Digital) (DTS) No Yes Yes Yes Yes Yes No Yes No 4:3 (Letter Box, Pan Scan) 16:9 (Wide) Yes Yes 192kHz / 24bit

PC Monitor Input

Wall Mount Features (DVD) Video CD Playback SVCD Playback MP3 Playback JPEG WMA Divx Playback Digital Out

Down Mix Out Closed Caption Screen Saver TV Screen Audio DAC

A3-12

19LV506

GENERAL SPECIFICATIONS
G-12 Accessories Owner's Manual Remote Control Unit Rod Antenna Poles Terminal Loop Antenna Terminal U/V Mixer DC Car Cord (Center+) Guarantee Card Warning Sheet Circuit Diagram Antenna Change Plug Service Facility List Important Safeguard Dew/AHC Caution Sheet Quick Set-up Sheet (Spanish) Battery UM size x pcs OEM Brand AC Adapter AC Cord (for AC Adapter) AC Cord AV Cord (2Pin-1Pin) Registration Card (NDL Card) 300 to 75ohm Antenna Adapter Sheet Information (Return) Sheet Information (HDMI) Cleaning Cloth Switch Side Power (Tact) Channel Up/Menu Up/Play Channel Down/Menu Down/Stop Volume Up/Menu > Volume Down/Menu < Menu Play Eject Skip+, Search+ Skip-, SearchStill/Pause Stop Main Power SW Input Select/Enter Rear Main Power SW Indicator Power/Stand-By Power Wake Up On Timer -No No No No No No No No No Yes Yes UM-4 x 2 pcs No No No Yes No Yes No Yes(USA version) No Yes Yes Yes Yes Yes Yes Yes No (CH+ Alternative) Yes No No No No (CH- Alternative) No Yes No Yes (Green / Red) No No Language w/Guarantee Card English Yes Yes No --No

G-13

Interface

A3-13

19LV506

GENERAL SPECIFICATIONS
Terminals Rear Video Input 1 Audio Input 1 S - Input 1 Video Input 2 Audio Input 2 S - Input 2 Video Output Audio Output Component Input 1 Analog Audio Component Input 2 Analog Audio HDMI Input 1 Analog Audio HDMI Input 2 Analog Audio Sub Woofer Out PC Monitor Input Analog Audio Digital Audio Output DC Jack (Center +) VHF/UHF Antenna Input Video Input 3 Audio Input 3 S - Input 3 Other Terminal AC Inlet Approx. W x D x H (mm)
w/o Handle, Stand Approx. W x D x H (mm)

G-14 G-15

Set Size Weight

G-16

Carton

G-17

Material

G-18

Environment

Net (Approx.) Net w/o Handle, Stand (Approx.) Gross (Approx.) Master Carton Content Material Dimensions W x D x H(mm) Description of Origin Gift Box Material W/Color Photo Label W/Handle Dimensions W x D x H(mm) Description of Origin Drop Test Height (cm) Container Stuffing (40' container) w/Pallet w/Wrapping Cabinet Front Rear Jack Panel PCB Non-Halogen Demand Eyelet Demand Environmental standard requirement Pb-free Measures for Whisker

RCA x 1 RCA x 2(L/MONO, R) Yes No No No No No RCA x 3 RCA x 2(L/MONO, R) No No Yes PC Audio Input Alternative No No No Yes Mini Pin Jack( 3.5), STEREO Coaxial No F Type No No No Headphone Yes 472 x 207 x 401 472 x 67 x 364 5.1kg (11.2lbs) 4.4kg (9.7bs) 6.8kg (15.0lbs) No --- Sets --- / ------Double/Full Color No Yes 558 x 565 x 181 Yes 6 Surfaces 80 1088 Sets/40' container No No PC+ABS 94V0 NON-HALOGEN PS 94V0 NON-DECABROM -No Yes Green procurement of ORION Phase3(Phase3A) Yes

A3-14

19LV506

GENERAL SPECIFICATIONS
G-1 TV System LCD LCD Size / Visual Size LCD Type Number of Pixels View Range Bright Dot Zero Bright Dot Ratio Color System Speaker Position Size Impedance Max 10%(Typical) 22.0 inch / 558.00mmV Color TFT LCD 1680(H) x 1050(V) 85/85 degree 80/80 degree < n=0 -NTSC 2 Speaker Front 1.2 x 2.8 inch 8 ohm 1.5W + 1.5W --NTSC DVD, CD-DA, DVD-R/RW (Video Format Only) 120 mm , 80 mm DSM-2 4 step 2-45 times (DVD) 4-40 times (CD) 4 step 2-45 times (DVD) 4-40 times (CD) 1/7 -1/2 times -1/7 -1/2 times -US System M ATSC(8VSB)/QAM 1Tuner US (W/CABLE) 2~69, 4A, A-5~A-1, A~I, J~W, W+1~W+84 44.00MHz 45.75MHz 41.25MHz 4.50MHz No US-Stereo Yes 1 V p-p/75 ohm ------8.0dBm/50k ohm ---0.5 V p-p/75 ohm -------

Left/Right Up/Down

Sound Output G-2 DVD System Color System Disc Disc Diameter Drive Search speed

Fwd Actual Rev Actual

Slow speed

Fwd Actual Rev Actual

G-3

Tuning System

Broadcasting System Tuner and Receive CH CH Coverage Intermediate Digital Frequency Analog

Analog Digital System Destination

Picture(FP) Sound(FS) FP-FS

G-4

Signal

Preset CH Stereo/Dual TV Sound Tuner Sound Muting Video Signal Input Level Output Level S/N Ratio (Weighted) Horizontal Resolution at DVD Mode RGB Signal Audio Signal Output Level Input Level Output Level

at DVD at TV

Digital Output Level S/N Ratio at DVD (Weighted) Harmonic Distortion Frequency Response : at DVD at Video CD at SVCD at CD

A3-15

22LV505

GENERAL SPECIFICATIONS
G-5 Power Power Source Power Consumption Stand by (at AC) Energy Star Per Year Power Fuse Safety Circuit IC Protector(Micro Fuse) Safety Radiation Laser Operation Storage AC DC at AC at DC 120V, 60Hz -65W at 120V 60Hz -1W at 120V 60Hz Yes -- kWh/Year Yes Yes Yes UL(UL6500_2nd) FCC DHHS +5oC ~ +40oC -20oC ~ +60oC Less than 80% RH No 120 Min No No No No -Min Sec RC-LT Yes TOSHIBA TOSHIBA 40-BF h ,44-BB h ,45-BA h ,45-BC h 3V UM-4 x 2 pcs 49 Keys

Protector

G-6

Regulation

G-7 G-8 G-9

Temperature

G-10

Operating Humidity Clock (Only Broadcasting data) Clock and Sleep Timer Max Time Timer On Timer Program Off Timer Program Game Timer Wake Up Timer Timer Back-up (at Power Off Mode) more than Unit Remote Glow in Dark Remocon Control Remocon Format Format Custom Code Power Source Voltage(D.C) UM size x pcs Total Keys

A3-16

22LV505

GENERAL SPECIFICATIONS
Keys Power Eject Sleep TV/DVD 1 2 3 4 5 6 7 8 9 0 Jump / Display Subtitle Audio Select Input Select / Zoom Mute CH Up CH Down Vol Up Vol Down Play Mode DVD Menu Up Down Left Right Enter Menu / Setup Exit / Cancel Game Picture Size Pause Play Stop Skip+ / Closed Caption Skip- / CH Return Search+ SearchSlow+ SlowAngle Maker Top Menu Return Closed Caption Repeat A-B Zoom/ Quick View Freeze frame Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes No No

A3-17

22LV505

GENERAL SPECIFICATIONS
G-11 Features Auto Shut Off Auto Search Power On Memory Comb Filter Game Position Auto Setup(Language/CH Program) Picture Setting(TV) Picture Preference Brightness , Contrast , Color Tint Sharpness Color Temperature DNR Cable Clear Picture Setting(PC) HOR Position , VER Position Phase, Clock Red, Green, Blue Auto Adjust Backlight Audio MTS Tone Control (Bass/Treble/Balance) Stable Sound Surround BBE SRS WOW (SRS 3D/Focus/Tru Bass) Variable Audio Out Tuning CH Program Air/Cable ADD/DELETE Label CH Label Video Label Favorite CH V-Chip Type RRT Setup Lock Hotel Lock Channel Lock Video Lock Panel Lock Menu Language Closed Caption CC Advanced Picture Size HD Zoom Picture Scroll Film Mode Aspect Backlight PFC(Power Factor circuit) Freeze frame PIP/POP Direct Input Selection Yes No Yes Yes 3 -D Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes No No No Yes Yes No No No No No Yes Yes Yes Yes Yes No Yes USA Type Yes No No No No English French Spanish Yes Yes Yes No No Yes Yes Yes No No No Yes

A3-18

22LV505

GENERAL SPECIFICATIONS
Digital Out Dolby Digital MPEG PCM DTS VGA (640x480) VGA (720x400) WVGA (848x480) SVGA (800x600) XGA (1024x768) WXGA (1280x768) WXGA (1280x720) WXGA (1360x768) SXGA (1280x1024) HDMI Input VGA (640480) 720480i (4:3) 720480i (16:9) 720480p (4:3) 720480p (16:9) 720576i (4:3) 720576i (16:9) 720576p (4:3) 720576p (16:9) 1280720p 19201080i CEC (ORION Standard) Deep Color xvYCC Component Input 720480i (4:3) 720480i (16:9) 720480p (4:3) 720480p (16:9) 720576i (4:3) 720576i (16:9) 720576p (4:3) 720576p (16:9) 1280720p 19201080i Size W x H(mm) Screw Size Yes No No No Yes Yes (60Hz) Yes (70Hz) No Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) No Yes Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) No No No No Yes (60Hz) Yes (60Hz) No No No Yes Yes (60Hz) Yes (60Hz) Yes (60Hz) Yes (60Hz) No No No No Yes (60Hz) Yes (60Hz) Yes (100 x 100) M4 x 10 Yes No Yes Yes Yes Yes DMF Support (Dolby Digital) (MPEG) (PCM) (DTS) (Dolby Digital) (DTS) No Yes Yes Yes Yes Yes No Yes No 4:3 (Letter Box, Pan Scan) 16:9 (Wide) Yes Yes 192kHz / 24bit

PC Monitor Input

Wall Mount Features (DVD) Video CD Playback SVCD Playback MP3 Playback JPEG WMA Divx Playback Digital Out

Down Mix Out Closed Caption Screen Saver TV Screen Audio DAC

A3-19

22LV505

GENERAL SPECIFICATIONS
G-12 Accessories Owner's Manual Remote Control Unit Rod Antenna Poles Terminal Loop Antenna Terminal U/V Mixer DC Car Cord (Center+) Guarantee Card Warning Sheet Circuit Diagram Antenna Change Plug Service Facility List Important Safeguard Dew/AHC Caution Sheet Quick Set-up Sheet(Spanish) Battery UM size x pcs OEM Brand AC Adapter AC Cord (for AC Adapter) AC Cord AV Cord (2Pin-1Pin) Registration Card (NDL Card) 300 to 75ohm Antenna Adapter Sheet Information (Return) Sheet Information (HDMI) Cleaning Cloth Switch Side Power (Tact) Channel Up/Menu Up/Play Channel Down/Menu Down/Stop Volume Up/Menu > Volume Down/Menu < Menu Play Eject Skip+, Search+ Skip-, SearchStill/Pause Stop Main Power SW Input Select/Enter Rear Main Power SW Indicator Power/Stand-By Power Wake Up On Timer -No No No No No No No No No Yes Yes UM-4 x 2 pcs No No No Yes No Yes No Yes(USA version) No Yes Yes Yes Yes Yes Yes Yes No (CH+ Alternative) Yes No No No No (CH- Alternative) No Yes No Yes (Green / Red) No No Language w/Guarantee Card English Yes Yes No --No

G-13

Interface

A3-20

22LV505

GENERAL SPECIFICATIONS
Terminals Rear Video Input 1 Audio Input 1 S - Input 1 Video Input 2 Audio Input 2 S - Input 2 Video Output Audio Output Component Input 1 Analog Audio Component Input 2 Analog Audio HDMI Input 1 Analog Audio HDMI Input 2 Analog Audio Sub Woofer Out PC Monitor Input Analog Audio Digital Audio Output DC Jack (Center +) VHF/UHF Antenna Input Video Input 3 Audio Input 3 S - Input 3 Other Terminal AC Inlet Approx. W x D x H (mm)
w/o Handle, Stand Approx. W x D x H (mm)

G-14 G-15

Set Size Weight

G-16

Carton

G-17

Material

G-18

Environment

Net (Approx.) Net w/o Handle, Stand (Approx.) Gross (Approx.) Master Carton Content Material Dimensions W x D x H(mm) Description of Origin Gift Box Material W/Color Photo Label W/Handle Dimensions W x D x H(mm) Description of Origin Drop Test Height (cm) Container Stuffing (40' container) w/Pallet w/Wrapping Cabinet Front Rear Jack Panel PCB Non-Halogen Demand Eyelet Demand Environmental standard requirement Pb-free Measures for Whisker

RCA x 1 RCA x 2(L/MONO, R) Yes No No No No No RCA x 3 RCA x 2(L/MONO, R) No No Yes PC Audio Input Alternative No No No Yes Mini Pin Jack( 3.5), STEREO Coaxial No F Type No No No Headphone Yes 536.5 x 207 x 439.5 536.5 x 67 x 403 6.1kg (13.5lbs) 5.4kg (11.9bs) 8.2kg (18.1lbs) No --- Sets --- / ------Double/Full Color No Yes 623 x 605 x 181 Yes 6 Surfaces 80 737 Sets/40' container No No PC+ABS 94V0 NON-HALOGEN PS 94V0 NON-DECABROM -No Yes Green procurement of ORION Phase3(Phase3A) Yes

A3-21

22LV505

DISASSEMBLY INSTRUCTIONS
1. REMOVAL OF MECHANICAL PARTS AND P.C. BOARDS
1-1: FRONT CABINET ASS'Y AND STAND ASS'Y (Refer to Fig. 1-1) 1. Remove the 2 screws (1). 2. Remove the Stand Ass'y in the direction of arrow (A). 3. Remove the 6 screws (2). 4. Remove the Front Cabinet Ass'y in the direction of arrow (B). 1-3: POWER PCB (Refer to Fig. 1-3) 1. Remove the Holder PCB in the direction of arrow (A). 2. Disconnect the following connectors: (CP501, CP8101 and CD301). 3. Remove the 6 screws (1). 4. Remove the Power PCB in the direction of arrow (B).

(2) (2)

(1)(1) (2) (2) (A) (2)


Stand Ass'y

(2) (B)
CP8101 CP501 Power PCB Front Cabinet Ass'y

(B)
CD301

(1)

Fig. 1-1 1-2: LCD PANEL AND REMOCON PCB (Refer to Fig. 1-2) 1. Disconnect the following connectors: (CD7005, CD7006 and CP2804). 2. Remove the LCD PANEL in the direction of arrow (A). 3. Disconnect the following connector: (CP7601). 4. Unlock the support (1). 5. Remove the Remocon PCB in the direction of arrow (B).
(1)
CP2804

(1)
Holder PCB

(1) (1) (1)(1) (A)

Fig. 1-3

1-4: DIGITAL PCB AND OPERATION PCB (Refer to Fig. 1-4) 1. Disconnect the following connectors: (CP2201 and CP3002). 2. Remove the 6 screws (1). 3. Remove the Spring Earth 1 and Digital PCB in the direction of arrow (A). 4. Remove the 3 screws (2). 5. Remove the Operation PCB in the direction of arrow (B).

(B)
CP7601 Remocon PCB

CD7006 CD7005

(A)
CP2201 Operation PCB

(B) (2) (2) (2)

(A)

LCD Panel

Fig. 1-2
Spring Earth 1

Digital PCB

(1) (1) (1) (1) (1) (1)

CP3002

Fig. 1-4

B1-1

19LV505/19LV506/22LV505

DISASSEMBLY INSTRUCTIONS
1-5: DVD DECK (Refer to Fig. 1-5) 1. Short circuit the position shown in Fig. 1-5 using a soldering iron. If you remove the DVD Deck with no soldering, the Laser may be damaged. 2. Remove the 4 screws (1). 3. Remove the DVD Deck in the direction of arrow (A). 4. Disconnect the following connectors: (CP2301, CP2302 and CP2303). 5. Remove the 2 screws (2). 6. Remove the Angle Mpeg in the direction of arrow (B). 7. Remove the 4 screws (3). 8. Remove the DVD MT PCB in the direction of arrow (C).

(A)

(2) (2)
Pick Up PCB

DVD Deck

(1) (1) (3)(3) (3) (3)


CP2303 CP2302 CP2301 Short circuit using a soldering iron.

(B)

(C)

DVD MT PCB Angle Mpeg

(1)

(1)

Fig. 1-5

NOTE 1. Before your operation, please read "PREPARATION OF SERVICING" 2. Use the Lead Free solder. 3. Manual soldering conditions Soldering temperature: 320 20oC Soldering time: Within 3 seconds Soldering combination: Sn-3.0Ag-0.5Cu 4. When Soldering/Removing of solder, use the drawing equipment over the Pick Up Unit to keep the Flux smoke away from it. 5. When installing the DVD Deck, remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD MT PCB connector.

B1-2

19LV505/19LV506/22LV505

DISASSEMBLY INSTRUCTIONS
2. REMOVAL OF DVD DECK PARTS
NOTE 1. Disassemble only the DVD DECK PARTS parts listed here. Minute adjustments are needed if the disassembly is done. If the repair is needed except listed parts, replace the DVD MECHA ASS'Y. 2-1: TRAVERSE ASS'Y (Refer to Fig. 2-1-A) 1. 2. 3. 4. Remove the 3 screws (1). Unlock the 2 supports (2). Remove the Insulator (R) from the Loader Sub Ass'y. Remove the Traverse Ass'y.
Loader Ass'y (Top Side) Check Hook Check Hook Check Hook

Fig. 2-1-D 2-2: SWITCH PCB ASS'Y/GEAR MIDDLE/GEAR FEED/RACK FEED ASS'Y/FEED MOTOR (Refer to Fig. 2-2-A) 1. Remove the Insulator (F). 2. Remove the Insulator (R). 3. Unlock the support (1). 4. Remove the Gear Middle. 5. Remove the screw (2). 6. Remove the Rack Feed Ass'y. 7. Remove the screw (3). 8. Remove the Switch PCB Ass'y. 9. Remove the screw (4). 10. Remove the Gear Feed. 11. Remove the 2 screws (5). 12. Remove the Feed Motor. 13. Remove the Gear Motor.

(2) (2)
Loader Sub Ass'y

Insulator (R)

Traverse Ass'y

(1) (1)
Screw Torque: 2.0 0.3kgfcm

(1)

Fig. 2-1-A
Gear Motor Traverse Ass'y

Feed Motor

NOTE 1. In case of the Traverse Ass'y installation, hook the wire on the Loader Ass'y as shown Fig. 2-1-B to Fig. 2-1-C.
Loader Ass'y (Bottom Side)

Insulator (R)

Insulator (F)

(1) (5)

(5)
Gear Feed

Insulator (F)

(4)
Gear Middle

Check Lock Check Hook

Check Lock

Rack Feed Ass'y

(2)

Fig. 2-1-B
(3)

Switch PCB Ass'y

80 5mm

Screw Torque: 1.3 0.3kgfcm (Screw 2) Screw Torque: 3.0 0.3kgfcm (Screw 3) Screw Torque: 1.0 0.3kgfcm (Screw 4, 5)

Fig. 2-2-A

Loader Ass'y

Check Hook

Fig. 2-1-C

B2-1

19LV505/19LV506/22LV505

DISASSEMBLY INSTRUCTIONS
NOTE 1. When installing the Rack Feed Ass'y, push both ends to align the teeth as shown Fig. 2-2-B. Then install it. 2. In case of the Gear Motor installation, check if the value of the Fig. 2-2-C is correct. 3. When installing the wire of the Switch PCB Ass'y, install it correctly as Fig. 2-2-D. Manual soldering conditions Soldering temperature: 320 20oC Soldering time: Within 3 seconds Soldering combination: Sn-3.0Ag-0.5Cu 4. After the assembly of the Traverse Ass'y, hook the wire on the Traverse Ass'y as shown Fig. 2-2-E.
Rack Feed Ass'y Traverse Ass'y Check Hook

Check Hook Check Hook

Check Hook Loosen the wire in the direction of the arrow.

Fig. 2-2-E

2-3: FFC WIRE HANDLING 1. When installing the FFC, fold it correctly and install it as shown from Fig. 2-3-A to Fig. 2-3-B. NOTE

Push

Push

1. Do not make the folding lines except the specified positions for the FFC. [ 24 pin FFC ]
Fold it by 90 To Pick Up PCB Printing Surface

[OK]

[NG]

Fig. 2-2-B
20 1mm

30 1mm Gear Motor 8.0 0.2mm

Fig. 2-3-A
Feed Motor

[ 6 pin FFC ]
40 1mm Safety surface for pressing of the insert. Fold Printing Surface

Fig. 2-2-C

Switch PCB Ass'y

~ FEED MOTOR ~ WHITE (4) BROWN (3)

Install wire from (1) to (4) in order.

Fig. 2-3-B

~ SPINDLE MOTOR ~ YELLOW (2) GREEN (1)

Fig. 2-2-D

B2-2

19LV505/19LV506/22LV505

DISASSEMBLY INSTRUCTIONS
3. REMOVAL AND INSTALLATION OF FLAT PACKAGE IC
REMOVAL 1. Put Masking Tape (cotton tape) around the Flat Package IC to protect other parts from any damage. (Refer to Fig. 3-1.) NOTE Masking is carried out on all the parts located within 10 mm distance from IC leads.
Blower type IC desoldering machine

3. When IC starts moving back and forth easily after desoldering completely, pickup the corner of the IC using tweezers and remove the IC by moving with the IC desoldering machine. (Refer to Fig. 3-3.) NOTE Some ICs on the PCB are affixed with glue, so be careful not to break or damage the foil of each IC leads or solder lands under the IC when removing it.

Masking Tape (Cotton Tape)

IC

Tweezers

Fig. 3-1
IC

2. Heat the IC leads using a blower type IC desoldering machine. (Refer to Fig. 3-2.) NOTE Do not rotate or move the IC back and forth , until IC can move back and forth easily after desoldering the leads completely. 4. Peel off the Masking Tape.

Fig. 3-3

5. Absorb the solder left on the pattern using the Braided Shield Wire. (Refer to Fig. 3-4.) NOTE Do not move the Braided Shield Wire in the vertical direction towards the IC pattern.

Blower type IC desoldering machine

Braided Shield Wire

Soldering Iron

IC

Fig. 3-2

IC pattern

Fig. 3-4

B3-1

19LV505/19LV506/22LV505

DISASSEMBLY INSTRUCTIONS
INSTALLATION 1. Take care of the polarity of new IC and then install the new IC fitting on the printed circuit pattern. Then solder each lead on the diagonal positions of IC temporarily. (Refer to Fig. 3-5.) 4. When bridge-soldering between terminals and/or the soldering amount are not enough, resolder using a Thintip Soldering Iron. (Refer to Fig. 3-8.)

Thin-tip Soldering Iron

IC

Soldering Iron

Fig. 3-8 5. Finally, confirm the soldering status on four sides of the IC using a magnifying glass. Confirm that no abnormality is found on the soldering position and installation position of the parts around the IC. If some abnormality is found, correct by resoldering. NOTE When the IC leads are bent during soldering and/or repairing, do not repair the bending of leads. If the bending of leads are repaired, the pattern may be damaged. So, always be sure to replace the IC in this case.

Solder temporarily

Solder temporarily

Fig. 3-5 2. Supply the solder from the upper position of IC leads sliding to the lower position of the IC leads. (Refer to Fig. 3-6.)

Solder

Soldering Iron

IC

Supply soldering from upper position to lower position

Fig. 3-6 3. Absorb the solder left on the lead using the Braided Shield Wire. (Refer to Fig. 3-7.) NOTE Do not absorb the solder to excess.

Soldering Iron IC

Braided Shield Wire

Fig. 3-7 B3-2 19LV505/19LV506/22LV505

SERVICE MODE LIST


This unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control for more than a the standard time in the appropriate condition. (See below chart.) Set Condition TV mode Set Key VOL. DOWN (Minimum) VOL. DOWN (Minimum) VOL. DOWN (Minimum) VOL. DOWN (Minimum) VOL. DOWN (Minimum) VOL. DOWN (Minimum) VOL. DOWN (Minimum) Remocon Key 0 Standard Time 2 sec. Operations Releasing of V-CHIP PASSWORD. Initialization of factory TV data. NOTE: If you set factory initialization, the memories are reset such as the channel setting, and the POWER ON total hours. Initialization of factory DVD data.

TV mode DVD mode (No disc) DVD mode (No disc)

2 sec.

2 sec.

2 sec.

DVD Write mode. Refer to the "RE-WRITE FOR DVD FIRMWARE". POWER ON total hours are displayed on the screen. Can be checked of the INITIAL DATA of MEMORY IC. Refer to the "WHEN REPLACING EEPROM (MEMORY) IC". Check of the SUM DATA and MICON VERSION on the screen. Refer to the "WHEN REPLACING EEPROM (MEMORY) IC". Display of the Adjustment MENU on the screen. Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display Adjustment). Check of the firmware version. D V D Refer to the "RE-WRITE FOR DVD FIRMWARE".

ALL mode

2 sec.

ALL mode

2 sec.

ALL mode

2 sec.

DVD mode (No disc)

STOP

2 sec.

DVD mode (No disc)

STOP

2 sec.

Releasing of PARENTAL LOCK. Refer to the "PARENTAL CONTROL - RATING LEVEL".

C-1

19LV505/19LV506/22LV505

SERVICING FIXTURES AND TOOLS


JG176 Up-Date Disc Ref. No. JG176 Part No. APJG176139 Parts Name Up-Date Disc Remarks Up-Date of the Firmware

RE-WRITE FOR DVD FIRMWARE


1. Turn on the power, and set the DVD mode. 2. Confirm that the "No Disc" will be appeared on the screen. 3. Press both VOL. DOWN button on the set and Channel button (5) on the remote control for more than 2 seconds. 4. Press VOL. UP/DOWN button on the unit to check if all the keys on the unit do not function. NOTE: To check if DVD Write mode is set. When inserting Up-Date Disc at Non DVD Write mode, the read error will happen. 5. Insert the Up-Date Disc. (Refer to SERVICING FIXTURE AND TOOLS) 6. Automatic read will start and "Firmware upgrade Please Wait" will be displayed on the screen. At this time, the horizontal noise lines may appear. But no problem. NOTE: Do not turn off the unit on the way or operate the keys on the unit and remocon. Up-Date error will happen and can not be done with the Up-Date of Up-Date Disc. 7. After the Up-Date, Logo screen will appear. 8. Unplug the AC cord, then plug it in. After the write, set to the initializing of shipping. 9. Turn on the power, and set the DVD mode. 10. Press both VOL. DOWN button on the set and Channel button (4) on the remote control for more than 2 seconds. The "INITIALIZE 5 ---> COMPLETE" will appear on the screen. 11. Then unplug the AC cord, and plug it in. CHECK FOR THE FIRMWARE VERSION 12. Turn on the power, and set the DVD mode. 13. Press both Channel button (1) on the remote control and the STOP button on the set for more than 2 seconds. Firmware version will be displayed on the top left of the screen.
No Disc ADLJB8111A

A D L J B 8 1 1 1 A

Fixed

Released times on the same date Release date (Example: 2008.01.11)

When the changed version displays, the Re-write will be completed. 14. Turn off the power

A = October B = November C = December

C-2

19LV505/19LV506/22LV505

WHEN REPLACING EEPROM (MEMORY) IC


CONFIRMATION OF CHECK SUM, POWER ON TOTAL HOURS AND MICON VERSION
Initial total of MEMORY IC, POWER ON total hours and MICON VERSIONcan be checked on the screen. Total hours are displayed in 16 system of notation. NOTE: If you set a factory initialization, the total hours is reset to "0". Please refer to "CONFIRMATION OF INITIAL DATA" when SUM DATA is not corresponding. 1. Turn on the POWER, and set to the ALL mode. 2. Set the VOLUME to minimum. 3. Press both VOL. DOWN button on the set and Channel button (8) on the remote control for more than 2 seconds. 4. After the confirmation of each check sum, turn off the power. NOTE:The each item value might be different according to each set.
CHECK SUM: 40D3 LCD PWR ON: 0000

Initial setting data check sum. POWER ON total hours.


= + + + (16 x 16 x 16 x thousands digit value) (16 x 16 x hundreds digit value) (16 x tens digit value) (ones digit value)

Sub Micon check version Main Micon check version EEPROM check version Parameter

SUB: DTV:

DA0E77Y221 CA06E82071

EEPROM: W50S01CM00 Picture: _dispSmartPic

FIG. 1

CONFIRMATION OF INITIAL DATA


If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to INITIAL SETTING TABLE (Attached "INITIAL DATA"). 1. Turn on the POWER, and set to the ALL mode. 2. Set the VOLUME to minimum. 3. Press both VOL. DOWN button on the set and Channel button (6) on the remote control for more than 2 seconds. ADDRESS and DATA should appear as FIG 2. NOTE: No need to set data other position than 7200~73FF.
ADDRESS DATA

INIT : 0001

0099

SUB: DA0E77Y221 DTV: CA06E82071 EEPROM: W50S01CM00

FIG. 2 4. ADDRESS is now selected and should "blink". Using the UP/DOWN buton on the remote, step through the ADDRESS until required ADDRESS to be changed is reached. 5. Press LEFT/RIGHT button to select DATA. When DATA is selected, it will "blink". 6. Again, step through the DATA using UP/DOWN button until required DATA value has been selected. 7. Pressing RIGHT/LEFT button will take you back to ADDRESS for further selection if necessary. 8. Repeat steps 4 to 6 until all data has been checked. 9. When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input. After the data input, set to the initializing of shipping. 10. Turn on the Power. 11. Set the VOLUME to minimum. 12. Press both VOL. DOWN button on the set and Channel button (1) on the remote control for more than 2 seconds. 13. After the finishing of the initializing of shipping, the unit will turn off automatically. The unit will now have the correct DATA for the new MEMORY IC. C-3 19LV505/19LV506

WHEN REPLACING EEPROM (MEMORY) IC


CONFIRMATION OF CHECK SUM, POWER ON TOTAL HOURS AND MICON VERSION
Initial total of MEMORY IC, POWER ON total hours and MICON VERSIONcan be checked on the screen. Total hours are displayed in 16 system of notation. NOTE: If you set a factory initialization, the total hours is reset to "0". Please refer to "CONFIRMATION OF INITIAL DATA" when SUM DATA is not corresponding. 1. Turn on the POWER, and set to the ALL mode. 2. Set the VOLUME to minimum. 3. Press both VOL. DOWN button on the set and Channel button (8) on the remote control for more than 2 seconds. 4. After the confirmation of each check sum, turn off the power. NOTE:The each item value might be different according to each set.
CHECK SUM: 40D3 LCD PWR ON: 0000

Initial setting data check sum. POWER ON total hours.


= + + + (16 x 16 x 16 x thousands digit value) (16 x 16 x hundreds digit value) (16 x tens digit value) (ones digit value)

Sub Micon check version Main Micon check version EEPROM check version Parameter

SUB: DTV:

DA0E77Y221 CA07E82071

EEPROM: W50T01CM01 Picture: _dispSmartPic

FIG. 1

CONFIRMATION OF INITIAL DATA


If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to INITIAL SETTING TABLE (Attached "INITIAL DATA"). 1. Turn on the POWER, and set to the ALL mode. 2. Set the VOLUME to minimum. 3. Press both VOL. DOWN button on the set and Channel button (6) on the remote control for more than 2 seconds. ADDRESS and DATA should appear as FIG 2. NOTE: No need to set data other position than 7200~73FF.
ADDRESS DATA

INIT : 0001

0099

SUB: DA0E77Y221 DTV: CA07E82071 EEPROM: W50T01CM01

FIG. 2 4. ADDRESS is now selected and should "blink". Using the UP/DOWN buton on the remote, step through the ADDRESS until required ADDRESS to be changed is reached. 5. Press LEFT/RIGHT button to select DATA. When DATA is selected, it will "blink". 6. Again, step through the DATA using UP/DOWN button until required DATA value has been selected. 7. Pressing RIGHT/LEFT button will take you back to ADDRESS for further selection if necessary. 8. Repeat steps 4 to 6 until all data has been checked. 9. When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input. After the data input, set to the initializing of shipping. 10. Turn on the Power. 11. Set the VOLUME to minimum. 12. Press both VOL. DOWN button on the set and Channel button (1) on the remote control for more than 2 seconds. 13. After the finishing of the initializing of shipping, the unit will turn off automatically. The unit will now have the correct DATA for the new MEMORY IC. C-4

22LV505

ELECTRICAL ADJUSTMENTS
1. ADJUSTMENT PROCEDURE
Read and perform these adjustments when repairing the circuits or replacing electrical parts or PCB assemblies. CAUTION Use an isolation transformer when performing any service on this chassis. When removing a PCB or related component, after unfastening or changing a wire, be sure to put the wire back in its original position. When you exchange IC and Transistor with a heat sink, apply silicon grease on the contact section of the heat sink. Before applying new silicon grease, remove all the old silicon grease. (Old grease may cause damages to the IC and Transistor). Prepare the following measurement tools for electrical adjustments. 1. Pattern Generator On-Screen Display Adjustment 1. Set the VOLUME to minimum. 2. Press the VOL. DOWN button on the set and the channel button (9) on the remote control for more than 2 seconds to display adjustment mode on the screen as shown in Fig. 1-1.
NO. 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 29 30 FUNCTION R DRIVE(N) R CUT OFF(N) G DRIVE(N) G CUT OFF(N) B DRIVE(N) B CUT OFF(N) R DRIVE(C) R CUT OFF(C) G DRIVE(C) G CUT OFF(C) B DRIVE(C) B CUT OFF(C) R DRIVE(W) R CUT OFF(W) G DRIVE(W) G CUT OFF(W) B DRIVE(W) B CUT OFF(W) BAK LIGHT CENT BAK LIGHT MAX NO. 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 FUNCTION BAK LIGHT MIN BRIGHTNESS CENT BRIGHTNESS MAX BRIGHTNESS MIN TINT SHARP H1 MAX SHARP H1 MIN SHARP H2 MAX SHARP H2 MIN SHARP V1 MAX SHARP V1 MIN CONTRAST CENTER CONTRAST MAX CONTRAST MIN COLOR CENTER COLOR MAX COLOR MIN CONTRAST 40

Fig. 1-2

2. BASIC ADJUSTMENTS
2-1: WHITE BALANCE 1. Place the set in Aging Test for more than 15 minutes. 2. Receive the gray scale pattern from the Pattern Generator. 3. Press the INPUT ZOOM button on the remote control to set to the AV mode. 4. Using the remote control, set the brightness and contrast to normal position. Activate the adjustment mode display of Fig. 1-2 and 5. press the channel button (03) on the remote control to select "R DRIVE(N)". 6. Press the CH. UP/DOWN button on the remote control to select the "R DRIVE (N)", "R CUT OFF (N)", "B DRIVE (N)", "B CUT OFF (N)", "R DRIVE (C)", "R CUT OFF (C)", "B DRIVE (C)", "B CUT OFF (C)", "R DRIVE (W)","R CUT OFF (W), "B DRIVE (W)" or "B CUTOFF(W)". 7. Adjust the LEFT/RIGHT button on the remote control to whiten the R DRIVE (N), R CUT OFF (N), B DRIVE (N), B CUT OFF (N), R DRIVE (C), R CUT OFF (C), B DRIVE (C), B CUT OFF (C), R DRIVE (W) ,R CUT OFF (W), B DRIVE (W) and B CUTOFF(W) at each step tone sections equally. 8. Perform the above adjustments 6 and 7 until the white color is achieved.

TV FULL 480i

Function

03 R DRIVE (N)

14

Step No.

Fig. 1-1 3. Use the CH. UP/DOWN button or Channel button (0-9) on the remote control to select the options shown in Fig. 1-2. 4. Press the MENU SETUP button on the remote control to end the adjustments. 5. To display the adjustment screen for TV, AV, GAME, COMPONENT, HDMI, PC and DVD mode, press the INPUT ZOOM button on the remote control. 6. Receive the DIGITAL broadcasting. 7. To display the adjustment screen for DTV mode, select the digital channel. 8. Press the VOL.DOWN button on the set and the channel (9) on the remote control for more than 2 seconds.

D-1

19LV505/19LV506/22LV505

ELECTRICAL ADJUSTMENTS
2-2: Confirmation of Fixed Value (Step No.) Please check if the fixed values of each of the adjustment item is set correctly referring below. (TV/AV/GAME/COMPONENT/HDMI/DVD/PC/DTV) AV CVBS Y/C Step No. Step No. Step No. * * * * * * 0 0 0 0 0 0 * * * * * * * * * * * * 0 0 0 0 0 0 * * * * * * * * * * * * 0 0 0 0 0 0 * * * * * * 75 75 75 100 100 100 30 30 30 111 111 111 180 180 180 50 50 50 128 122 122 511 511 511 0 0 0 511 511 511 0 0 0 511 511 511 0 0 0 * * * * * * 50 50 50 130 140 140 255 255 255 0 0 0 * * * TV GAME 480i Step No. Step No. * * * * 0 0 0 0 * * * * * * * * 0 0 0 0 * * * * * * * * 0 0 0 0 * * * * 75 75 100 100 30 30 113 113 180 180 50 50 122 121 511 511 0 0 511 511 0 0 511 511 0 0 * * * * 50 50 140 170 255 255 0 0 * * COMPONENT 480p 720p 1080i Step No. Step No. Step No. * * * * * * 0 0 0 0 0 0 * * * * * * * * * * * * 0 0 0 0 0 0 * * * * * * * * * * * * 0 0 0 0 0 0 * * * * * * 75 75 75 100 100 100 30 30 30 128 127 127 180 180 180 50 50 50 122 129 129 511 511 511 0 0 0 511 511 511 0 0 0 511 511 511 0 0 0 * * * * * * 50 50 50 175 186 186 255 255 255 0 0 0 * * * HDMI DVD 720p 1080i VGA Step No. Step No. Step No. Step No. * * * * * * * * 0 0 0 0 0 0 0 0 * * * * * * * * * * * * * * * * 0 0 0 0 0 0 0 0 * * * * * * * * * * * * * * * * 0 0 0 0 0 0 0 0 * * * * * * * * 75 75 50 75 100 100 100 100 30 30 30 30 128 128 128 110 160 160 180 180 50 50 50 50 128 128 128 122 511 511 511 511 0 0 0 0 511 511 511 511 0 0 0 0 511 511 511 511 0 0 0 0 * * * * * * * * 50 50 50 50 163 163 163 140 255 255 255 255 0 0 0 0 * * * * PC 1280*720 Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 145 96 128 511 0 511 0 511 0 * * 50 128 255 0 * DTV 480p 720p Step No. Step No. * * * * 0 0 0 0 * * * * * * * * 0 0 0 0 * * * * * * * * 0 0 0 0 * * * * 75 75 100 100 30 30 127 127 180 180 50 50 118 115 511 511 0 0 511 511 0 0 511 511 0 0 * * * * 50 50 140 140 255 255 0 0 * *

NO.

FUNCTION

3 R DRIVE (N) 4 R CUTOFF (N) 5 G DRIVE (N) 6 G CUTOFF (N) 7 B DRIVE (N) 8 B CUTOFF (N) 9 R DRIVE (C) 10 R CUTOFF (C) 11 G DRIVE (C) 12 G CUTOFF (C) 13 B DRIVE (C) 14 B CUTOFF (C) 15 R DRIVE (W) 16 R CUTOFF (W) 17 G DRIVE (W) 18 G CUTOFF (W) 19 B RRIVE (W) 20 B CUTOFF (W) 29 BAK LIGHT CENT 30 BAK LIGHT MAX 31 BAK LIGHT MIN 32 BRIGHTNESS CENT 33 BRIGHTNESS MAX 34 BRIGHTNESS MIN 35 TINT 36 SHARP H1 MAX 37 SHARP H1 MIN 38 SHARP H2 MAX 39 SHARP H2 MIN 40 SHARP V1 MAX 41 SHARP V1 MIN 42 CONTRAST CENTER 43 CONTRAST MAX 44 CONTRAST MIN 45 COLOR CENT 46 COLOR MAX 47 COLOR MIN 50 CONTRAST 40 NOTE: For the step no. with

480i Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 128 511 0 511 0 511 0 * * 50 163 255 0 *

480p Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 128 511 0 511 0 511 0 * * 50 163 255 0 *

640*480 Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 145 96 128 511 0 511 0 511 0 * * 50 128 255 0 *

720*400 800*600 1024*768 1280*768 Step No. Step No. Step No. Step No. * * * * * * * * 0 0 0 0 0 0 0 0 * * * * * * * * * * * * * * * * 0 0 0 0 0 0 0 0 * * * * * * * * * * * * * * * * 0 0 0 0 0 0 0 0 * * * * * * * * 75 75 75 75 100 100 100 100 30 30 30 30 128 128 128 128 145 145 145 145 96 96 96 96 128 128 128 128 511 511 511 511 0 0 0 0 511 511 511 511 0 0 0 0 511 511 511 511 0 0 0 0 * * * * * * * * 50 50 50 50 128 128 128 128 255 255 255 255 0 0 0 0 * * * *

852*480 1360*768 1280*1024 1440*900 Step No. Step No. Step No. Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 145 96 128 511 0 511 0 511 0 * * 50 128 255 0 * -

480i Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 127 180 50 115 511 0 511 0 511 0 * * 50 140 255 0 *

1080i Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 127 180 50 122 511 0 511 0 511 0 * * 50 140 255 0 *

* mark, please adjust it according to the situation of the set.

D-2

19LV505/19LV506

D-3

ELECTRICAL ADJUSTMENTS
2-3: Confirmation of Fixed Value (Step No.) Please check if the fixed values of each of the adjustment item is set correctly referring below. (TV/AV/GAME/COMPONENT/HDMI/DVD/PC/DTV) AV TV CVBS Y/C Step No. Step No. Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 112 180 50 128 511 0 511 0 511 0 * * 50 130 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 116 180 50 122 511 0 511 0 511 0 * * 50 140 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 116 180 50 122 511 0 511 0 511 0 * * 50 140 255 0 * GAME 480i Step No. Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 116 180 50 122 511 0 511 0 511 0 * * 50 140 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 120 180 50 121 511 0 511 0 511 0 * * 50 115 255 0 * COMPONENT 480p 720p 1080i Step No. Step No. Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 122 511 0 511 0 511 0 * * 50 120 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 129 511 0 511 0 511 0 * * 50 120 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 129 511 0 511 0 511 0 * * 50 120 255 0 * HDMI DVD 720p 1080i VGA Step No. Step No. Step No. Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 128 511 0 511 0 511 0 * * 50 163 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 128 511 0 511 0 511 0 * * 50 163 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 128 511 0 511 0 511 0 * * 50 163 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 115 180 50 122 511 0 511 0 511 0 * * 50 140 255 0 * PC 1280*720 Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 145 96 128 511 0 511 0 511 0 * * 50 128 255 0 * DTV 480p 720p Step No. Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 122 511 0 511 0 511 0 * * 50 140 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 122 511 0 511 0 511 0 * * 50 140 255 0 *

NO.

FUNCTION

480i Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 128 511 0 511 0 511 0 * * 50 140 255 0 *

480p Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 128 511 0 511 0 511 0 * * 50 163 255 0 *

640*480 Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 145 96 128 511 0 511 0 511 0 * * 50 128 255 0 *

720*400 800*600 1024*768 1280*768 Step No. Step No. Step No. Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 145 96 128 511 0 511 0 511 0 * * 50 128 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 145 96 128 511 0 511 0 511 0 * * 50 128 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 145 96 128 511 0 511 0 511 0 * * 50 128 255 0 * * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 145 96 128 511 0 511 0 511 0 * * 50 128 255 0 *

852*480 1360*768 1280*1024 1440*900 Step No. Step No. Step No. Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 145 96 128 511 0 511 0 511 0 * * 50 128 255 0 * -

480i Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 122 511 0 511 0 511 0 * * 50 140 255 0 *

1080i Step No. * * 0 0 * * * * 0 0 * * * * 0 0 * * 75 100 30 128 180 50 122 511 0 511 0 511 0 * * 50 140 255 0 *

3 R DRIVE (N) 4 R CUTOFF (N) 5 G DRIVE (N) 6 G CUTOFF (N) 7 B DRIVE (N) 8 B CUTOFF (N) 9 R DRIVE (C) 10 R CUTOFF (C) 11 G DRIVE (C) 12 G CUTOFF (C) 13 B DRIVE (C) 14 B CUTOFF (C) 15 R DRIVE (W) 16 R CUTOFF (W) 17 G DRIVE (W) 18 G CUTOFF (W) 19 B RRIVE (W) 20 B CUTOFF (W) 29 BAK LIGHT CENT 30 BAK LIGHT MAX 31 BAK LIGHT MIN 32 BRIGHTNESS CENT 33 BRIGHTNESS MAX 34 BRIGHTNESS MIN 35 TINT 36 SHARP H1 MAX 37 SHARP H1 MIN 38 SHARP H2 MAX 39 SHARP H2 MIN 40 SHARP V1 MAX 41 SHARP V1 MIN 42 CONTRAST CENTER 43 CONTRAST MAX 44 CONTRAST MIN 45 COLOR CENT 46 COLOR MAX 47 COLOR MIN 50 CONTRAST 40 NOTE: For the step no. with

* mark, please adjust it according to the situation of the set.

D-4

22LV505

D-5

ELECTRICAL ADJUSTMENTS
3. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (WIRING CONNECTION)

LCD PANEL DVD MT PCB


DVD DECK

CP8501 CP8502

CP2301

CD2001

CP2302 CP2303 CD2301

OPERATION PCB
CP2201 CD7005

CP7601 OS7601

REMOCON PCB
CD7006

CD3002

CD2804

CP3001

CP501

CP3002

CP2804

J8101 J8104 CD6202 TU5801 J4302 CP3602 J4301 CP4303 J8102

J501 J301

CP4301

POWER PCB

CD301

J8103

SPEAKER

DIGITAL PCB

D-6

19LV505/19LV506/22LV505

CD6203

CP8101

TROUBLESHOOTING GUIDE
(LCD SECTION)
POWER DOES NOT TURN ON

Is F501 broken?

Yes

Change F501.

No

Is there voltage at pin 6 of IC501 21V? Yes

No

Check IC501 and peripheral circuit.

Yes Is R510 broken? Change R510.

No

Change Digital PCB.

E-1

19LV505/19LV506/22LV505

TROUBLESHOOTING GUIDE

THE PICTURE APPEARS, BUT THE AUDIO DOES NOT APPEARS. (AT RF MODE)

Is CD301 connected?

No

Connect CD301.

Yes

Is there signal at pins 1 and 4 of CD301? No

Yes

Change SP301 and SP302.

Is there signal at pins 2 and 4 of IC301? No

Yes

Check IC301 and peripheral circuit.

Is there signal at pins AA3 and AA4 of IC2801? No

Yes

Check Connection of CP4301.

Is there signal at pins 1 and 2 of IC6551? No

Yes

Check IC6551 and peripheral circuit.

Is there signal at pin 3 of IC6552,IC6553? No

Yes

Check IC6552,IC6553 and peripheral circuit.

Is there signal at pin 5 of TU5801? No

Yes

Check IC5801 and peripheral circuit.

Change TU5801.

E-2

19LV505/19LV506/22LV505

TROUBLESHOOTING GUIDE

THE PICTURE DOES NOT APPEAR

No Does backlight shine?

Is CD7005,CD7006 connected ? Yes

No Connected CD7005,CD7006.

Yes

Is the signal pin 18 and 19 of IC7001 ? Yes

No

Check IC7001 and peripheral circuit.

Is the voltage at pin 20 of IC7001 12V ? Yes

No Check F7001.

Is CD2804 connected?

No

Connected CD2804.

Yes

No Is there voltage at pins 1,2 and 16 of CP2804 5V? Yes Is there signal at pins 5,6,7, Yes 8,9,11,12,13,14,15,20,21, 22,23,24,26,27,28,29 and 30 of CP2804? No Change DIGITAL PCB. Check Q3009 and peripheral circuit.

Change V2801(PANEL).

E-3

19LV505/19LV506/22LV505

TROUBLESHOOTING GUIDE

THE COLOR DOES NOT APPEAR

Is setting of color normal? Yes

No Adjust the color.

Is the color signal received? Yes

No Receive the color signal.

Is there color signal at IC2801? Yes

No Check IC2801 and peripheral circuit.

Change DIGITAL PCB.

E-4

19LV505/19LV506/22LV505

TROUBLESHOOTING GUIDE
(DVD SECTION)
DOES NOT DISPLAY DVD PICTURE

Does this display logo picture? No

Yes Check the disc.

Is there signal at pins 149 and 151 of IC4001?

Yes

Check pins 8 and 10 of CP8501 and peripheral circuit.

No

Does IC4001 gets P.CON+3.3V and P.CON+1.8V? No

Yes Change IC4001.

Check P.CON+3.3V and P.CON+1.8V line.

E-5

19LV505/19LV506/22LV505

TROUBLESHOOTING GUIDE

DISC DOES NOT EJECT

Does OSD appear on the screen? Yes

No

Is remote key set effectively? Yes

No

Check pins J18 and J19 of IC2801 and peripheral circuit.

Check pins 138 and 139 of IC4001 and peripheral circuit.

Does this eject disc at change DVD DECK? Yes

No Is there signal at pins 4 and 5 of CP2302? Yes

No

Check IC4001 and peripheral circuit.

Change DVD DECK.

Is there signal at pins 1 and 2 of CP2302? Yes

No Change IC2301.

Change IC4001.

E-6

19LV505/19LV506/22LV505

TROUBLESHOOTING GUIDE

DOES NOT PLAY DVD

Change DVD DECK. No Yes Does CD2001 connect with CP2301 correctly? Yes Is the voltage between JG017 and JG018 less than 0.6V? Yes

Does this display "INCORRECT DISC"? No

No

Connect CD2301.

Does this display reading mark? Yes

No Change IC4001.

No Does disc rotate? Change DVD DECK.

Yes

Change IC4001.

E-7

19LV505/19LV506/22LV505

TROUBLESHOOTING GUIDE

DOES NOT PLAY CD

Change DVD DECK. No Yes Does CD2001 connect with CP2301 correctly? Yes Is the voltage between JG019 and JG018 less than 0.6V? Yes

Does this display "INCORRECT DISC"? No

No

Connect CD2301.

Does this display reading mark? Yes

No Change IC4001.

No Does disc rotate? Change DVD DECK.

Yes

Change IC4001.

E-8

19LV505/19LV506/22LV505

TROUBLESHOOTING GUIDE

NO SOUND DVD/CD ANALOG AUDIO

Is there signal at pins 113, 114, 115 and 116 of IC4001? Yes

No Change IC4001.

Is there signal at pins 1 and 7 of IC8501? Yes

No

Check pins 1 and 7 of IC8501 and peripheral circuit.

No Does CD8501 connected? Connected CD8501.

Yes

Change DIGITAL PCB.

NO SOUND DVD/CD DIGITAL AUDIO

Is there signal at pin1 of CP8501?

Yes Change DIGITAL PCB.

No

Is there signal at pin122 of IC4001? No

Yes

Check line circuit IC4001 to CP8501.

Change IC4001.

E-9

19LV505/19LV506/22LV505

DVD BLOCK DIAGRAM

DVD LOADER DSM2 LCD BLOCK DUPRD1 MD_DVD, MD_CD RF, A, B, C, D, E, F OPU DVD_CD, DVD_LD, CD_LD TR+/-, FO+/-, MOT_LD+/-, MOT_SLED+/MOT_SPDL+/SPINDLE/SLED/ FOCUS/TRACK_PWM, TRAY_CLOSE/OPEN SPDL_SENS+/AUDIO AMP IC8501 NJM4565M(TE1) DVD_AUDIO_L DVD_AUDIO_R MPEG/MICON/DSP/RF_AMP IC4001 ZR36966ELCG-D DUPTD1 TIN_SW SPDIF DAC_VIDEO_C/D DAC_VIDEO_A RESET SYS_MUTE TX RX START_SW SPDIF-134 C_VIDEO Y_VIDEO DVD RESET ZERO

SPINDLE/ STEPING/ SLED MOTOR

Motor Drive IC2301 LA6565VR-TLM-E

HOME, TIN_SW, TOUT_SW APWM_L+/-, APWM_R+/HA0~A19, HD0~D15, MEMCS0, RD, WR

DVD_A_OUT_L DVD_A_OUT_R

SD_A0~A11 FLASH 16M IC4007 SST39VF1601-70-4C-EKE SD_D0~D15 RAMDQM, CLK, CKE, WE#, CAS#, CS0#, CS1#, RAS# SD_BA0, DQM

64M SDRAM IC4005 M12L64164A-7TG

F-1

19LV505/19LV506/22LV505

F-2

POWER BLOCK DIAGRAM


TRANSFORMER T501 1 12 11 8 D515 D523 DC-DC CONVERTER IC503 LA5797M-TE-L-E 1 Q501 POWER CONTROL IC IC501 FA5531P-A2 1 ZCD VH 8 2 F 3 IS 7 NC Vcc 6 7 CP501__4.P.CON+32 CP501__21. POWER FAIL CP501__5.6. AT+12V CP501__7.8.9. AT+5.8V

CD501 AC IN

J501

L501 F501 4 2 3 1

D510

D518 C502
D505

3 5 6

Q505
7 SOUND AMP IC301 1 LA42052-E REGULATOR IC502 KIA431A-AT 3 1

FEED BACK IC505 PS2561AL1-1-V(W) 4 3 1 2

CP501__2.FILTER_MUTE

4 GN OUT 5

CP501__20.INVERTER_H CP501 19.LIGHT CTL

T7001
DRIVE Q7005

1 4

5 6 7 8

CD7005 CD7005 CD7005 CD7005

14.HV 7.LV 8.LV 1.HV

17 18 20 1 11 10 8

1 16 9
DRIVE Q7004

5 6 7 8

CD7005 CD7005 CD7005 CD7005

14.HV 7.LV 8.LV 1.HV

4 T7002

INVERTER CONTROLLER IC7001 BD988SFV-E2

DRIVE Q7003

1 7 8 4

6 2 9

FEED_BACK IC7002 LM2902DR

F-3

19LV505/19LV506/22LV505

F-4

POWER(DIGITAL PCB) BLOCK DIAGRAM

5.0V REGULATOR IC3007 BD7820FP-E2 3.3V REGULATOR IC3009 CP3001 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 FILTER MUTE TUNER+30V AT+12V AT+5.8V SUB MICON IC6202 R5F21124FP
S-1170B33UC-OTSTFG

5.0V

AT3.3V
DIGITAL TUNER TU5801 ENG36E18KRF EEPROM IC2805 M24256-BWMN6TP

BTSC DEMODULATOR IC5801 AN5832SA-E1V VDD CORE 1V IC3001 BD9130NV LIGHT_CTL INVERTER_H POWER FAIL KEY_B KEY_A VDD CORE IC3002 AL1015 3.3V

AUDIO ADC IC6551 AK5358A

1V SCALER IC IC2801 R8J66954BG

SW

FLASH IC IC2804
EN29LV320AB-70TCP

1.8V REGULATOR IC3003 PQ035ZN1HZPH LCD PANEL V2801 T190PW01_V0

1.8V

DDR SDRAM IC2802 HYB18TC256160BF-3S

LCD+B SW Q3009 RTQ035P02-TR

AUDIO Lch SW IC6552 NJM2534V(TE2)

AUDIO Rch SW IC6553 NJM2534V(TE2)

AUDIO Lch SW IC6557 NJM2534V(TE2)

AUDIO Lch SW IC6558 NJM2534V(TE2)

F-5

19LV505/19LV506

F-6

POWER(DIGITAL PCB) BLOCK DIAGRAM

5.0V REGULATOR IC3007 BD7820FP-E2 3.3V REGULATOR IC3009 CP3001 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 FILTER MUTE TUNER+30V AT+12V AT+5.8V SUB MICON IC6202 R5F21124FP
S-1170B33UC-OTSTFG

5.0V

AT3.3V
DIGITAL TUNER TU5801 ENG36E18KRF EEPROM IC2805 M24256-BWMN6TP

BTSC DEMODULATOR IC5801 AN5832SA-E1V VDD CORE 1V IC3001 BD9130NV LIGHT_CTL INVERTER_H POWER FAIL KEY_B KEY_A VDD CORE IC3002 AL1015 3.3V

AUDIO ADC IC6551 AK5358A

1V SCALER IC IC2801 R8J66954BG

SW

FLASH IC IC2804
EN29LV320AB-70TCP

1.8V REGULATOR IC3003 PQ035ZN1HZPH LCD PANEL V2801 T220SW01_V0

1.8V

DDR SDRAM IC2802 HYB18TC256160BF-3S

LCD+B SW Q3009 RTQ035P02-TR

AUDIO Lch SW IC6552 NJM2534V(TE2)

AUDIO Rch SW IC6553 NJM2534V(TE2)

AUDIO Lch SW IC6557 NJM2534V(TE2)

AUDIO Lch SW IC6558 NJM2534V(TE2)

F-7

22LV505

F-8

SIGNAL BLOCK DIAGRAM

OUT

HEADPHONE JACK J301 PJ-364H COAXIAL J4301 RCH-101HT(OR)

SPEAKER L/R SP301, SP302 NB073N1-B1 COMPONENT Y SPDIF AMP L/R COMPONENT U AUDIO L/R COMPONENT V SOUND AMP IC IC301 LA42052-E

IN

COMPONENT IN J8102 RCA-341H(NI)-09

AV 1 CVBS CVBS _AV_IN J8104 RCA-341H(2)NI-06 AV1_A_IN_L AV1_A_IN_R AUDIO Lch SW IC IC6557 NJM2534V(TE2)

IN

AV 2/YUV AUDIO_L IN COMPONENT AUDIO IN J8103 RCA-228H(3)NI-02

AUDIO Lch SW IC IC6552 NJM2534V(TE2)

AUDIO L LCD PANEL V2801 T190PW01_V0

LVDS DATA/CLK AV 2/YUV AUDIO_R PC/DVI AUDIO L AUDIO Rch SW IC IC6558 NJM2534V(TE2)

IN

PC/DVI AUDIO IN J4302 PJ-364H

AUDIO Rch SW IC IC6553 NJM2534V(TE2)

AUDIO R

AUDIO ADC IC IC6551 AK5358A

AUDIO DATA

PC/DVI AUDIO R

SIF IN TUNER TU5801 ENG36E18KRF

TUNER AUDIO L BTSC DEMODULATOR IC IC5801 TUNER AUDIO R AN5832SA -E1V

Y SW IC6554 MM1501XNRE

SCALER IC IC2801 R8J66954BG C SW IC6555 MM1501XNRE SW_C_IN PC R PC G PC IN CP4303 IN WD-00021-R

DIGITAL RF (IF) PC B ANALOG RF(CVBS)

IN

S VIDEO IN J8101 DIN-417HA-01 DVD CP3002 18 RX 7 TX 13 DVD_A_OUT_R 14 DVD_A_OUT_L 1 SPDIF-134 [Y]VIDEO 15 16 [U]C_VIDEO 6 START_SW 4 DVD_RESET 2 ZERO

AV1_Y AV1_C

SW_Y_IN

DIGITAL_A_SW IC6556 SN74LVC1G3157DCKR SUB MICON IC6202 R5F21124FP

F-9

19LV505/19LV506

F-10

SIGNAL BLOCK DIAGRAM

OUT

HEADPHONE JACK J301 PJ-364H COAXIAL J4301 RCH-101HT(OR)

SPEAKER L/R SP301, SP302 NB073N1-B1 COMPONENT Y SPDIF AMP L/R COMPONENT U AUDIO L/R COMPONENT V SOUND AMP IC IC301 LA42052-E

IN

COMPONENT IN J8102 RCA-341H(NI)-09

AV 1 CVBS CVBS _AV_IN J8104 RCA-341H(2)NI-06 AV1_A_IN_L AV1_A_IN_R AUDIO Lch SW IC IC6557 NJM2534V(TE2)

IN

AV 2/YUV AUDIO_L IN COMPONENT AUDIO IN J8103 RCA-228H(3)NI-02

AUDIO Lch SW IC IC6552 NJM2534V(TE2)

AUDIO L LCD PANEL V2801 T220SW01_V0

LVDS DATA/CLK AV 2/YUV AUDIO_R PC/DVI AUDIO L AUDIO Rch SW IC IC6558 NJM2534V(TE2)

IN

PC/DVI AUDIO IN J4302 PJ-364H

AUDIO Rch SW IC IC6553 NJM2534V(TE2)

AUDIO R

AUDIO ADC IC IC6551 AK5358A

AUDIO DATA

PC/DVI AUDIO R

SIF IN TUNER TU5801 ENG36E18KRF

TUNER AUDIO L BTSC DEMODULATOR IC IC5801 TUNER AUDIO R AN5832SA -E1V

Y SW IC6554 MM1501XNRE

SCALER IC IC2801 R8J66954BG C SW IC6555 MM1501XNRE SW_C_IN PC R PC G PC IN CP4303 IN WD-00021-R

DIGITAL RF (IF) PC B ANALOG RF(CVBS)

IN

S VIDEO IN J8101 DIN-417HA-01 DVD CP3002 18 RX 7 TX 13 DVD_A_OUT_R 14 DVD_A_OUT_L 1 SPDIF-134 [Y]VIDEO 15 16 [U]C_VIDEO 6 START_SW 4 DVD_RESET 2 ZERO

AV1_Y AV1_C

SW_Y_IN

DIGITAL_A_SW IC6556 SN74LVC1G3157DCKR SUB MICON IC6202 R5F21124FP

F-11

22LV505

F-12

PRINTED CIRCUIT BOARDS

DVD MT (TOP SIDE)

DVD MT (BOTTOM SIDE)

MOTOR
B2305 B4016 C2337 C2332 R2355 C2323 C2326 R2341 R2309 W813 R2340 C2331 C2339 C2309 C2317 C2338 B2304 R2350 C2321 C4059 W812 C2336 C2350 R2353 R4019 R4043 B4002 R4018 R4022 R2332 C2334 C4076 C2319 R2307 R2333 B4003 R4023 R4062 R2342 C4004 C4055 C4057 C4086 C4033 R2349 R4061 R2324 R4002 C2360 C2358 R2352 C4003 R2335 R2336 R4063 C4037 C2357 W807 R4003 R2328 C4056 C4011 C4001 C4007 R4060 R2334 R4004 C2306 R2358 C2359 C2330 R4005 C8510 R2357 R4086 C2305 C4028 R4045 C2304 R2313 C4079 R4078 C4060 C4039 D2303 IC4007 R4089 C8512 R4052 C4027 D2304 W860 C4051 C4005 R4065 C2301 R2339 R4087 C4054 R4016 R4032 C4081 C4044 C4052 R2330 R2325 C2333 R2337 C4006 Q2301 C2335 C4010 C4008 Q2302 R2310 C8504 R2308 C8505 R2338 L8502 C4091 C4021 C8511 L8504 L8501 C8502 C4105 D4002 B8502 C8503 C8501 R8508 R8509 R8507 R8537 R8506 IC8502 C8521 B8504 C8520 B8503 R8516 R8539 W818 D4003 R4067 C4096 R4024 C4032 R4014 C4040 W841 R4048 C4041 R4054 R4053 D4008 W825 C4077 IC4005 R2306 R2318

C2327 C2340 C2341 C4015

CP2301_1 C2348

C2329

CP2302

C2316 R2360 C4002 157 C4058 C2328 C4085 R4001 C4034 W836 R4012 R4042 C4035 IC4001

C4070

C4071 C2307

R2327 R2326 R2329 R2323

CP2303

REGULATOR

C4075 R2319 R2305

C4095 C4062 C4064 R4040

X4001

IC2301

R2321 R2320 R2302 C2365 C8530 C8529 R8528 R8527 B4001 C4053 C8527 C8528 R2301 C8544

R2304 C2303 R2303 C2302 C2315 C2310

C8517

B4010

C4014

C8539

C4042 C4012

53 R4008 C4029 C4022 C4020 C4013 C4019 C4018 C4024 C4023 C4025 C4072

R4009 C4082 C4038 D8510 B4006 C4030

R8510

C4099

DMG097A
C4009

B4005

C4067

C4083

C8542

C8514

C8525

R8535 R8536 C8543 C8537 C8536

C8541

R8533 C8531 R8529 R8531

C8516

C8538

105

C8533

R4039

C4078

C4016

R8517 R8521 R8523 R8522

CP8502

C8526

C8513

C8506

D4005

MPEG
B4008

C8515 B8501

B4015

C4069

R4071

R8530 R8532 R8534 C8532

C8518 C8519 C8534

IC8501

R4036 R4037 R4038

C4049

W824 C4026

CP8501

DMG097A

C4036

C4050 C4045

C4046

C4047

NTSC PAL

G-1

19LV505/19LV506

G-2

PRINTED CIRCUIT BOARDS DVD MT (TOP SIDE)


DVD MT (BOTTOM SIDE)

MOTOR
C2337 C2332 R2355 R2309 C2331 C2339 B2304 C2321 R2353 R2330 R2325 R2307 R2337 B2305 B4016 C2323 C2335 C2338 C2336 C2334 C2326 W813 C2309 C2317 W812 C4059 R4019 R4043 R4018 R4022 R2306 R2318 R2341 R2340

C2327 C2340 C2341 C4015

CP2301_1 C2348

C2329

CP2302

R2350 B4002 C4076 R2342 R2349 R2352 C2330

C2316 R2360 C4002 157 C4058 C2328 C4085 R4001 C4034 W836 R4012 R4042 C4035

C2350

C4070

REGULATOR

B4003 R2324 C4037 C4011

C4071 C2307

R2329 R2323

R2328 C2306 R2310

C4008

C2360

C2358 C2357 C2359

C4010

R2327 R2326

CP2303

C4006

C4075 R2319 R2305

C2319

X4001

IC2301

C8530 C8529 R8528 R8527 B4001 C4053 C8527 C8528 R2301 C8544

C8515 C2315 C2310

B8501 L8501 C8502

D2304 C2301 R2339

C8504 R2308 C8505 R2338 L8502

R2320 R2302 C2365

R2304 C2303 R2303 C2302

C8517

D2303

B4015 B4010

C4105

C4014

C4069

C4042 C4012

C8534

C8539

CP8502

C8538

R4008 C4029

C4022 C4020

C8520

C4019

C4082

C4072

C4099

C8514

C4038 D8510 B4006

C8525

R8510

C4018

C4024 C4023 C4025

C4030

R8535 R8536 C8543 C8537 C8536

W818

C4013

R4009

C8541

R8533 C8531 R8529 R8531

C8516

B8503

D4008

W825

53

105

C8533

R4039

C4078

IC8501

IC8502

C4016

R8517 R8521 R8523 R8522

C8526

C8513

C8506

D4005

R4071

B8502

C8503 C8501 R8508 R8509 R8507 R8537 R8506 C8521 B8504 R8516 R8539

D4003 R4067

R8532 R8534 C8532

D4002

R8530

C8518 C8519

C4096

C8512 C4051 C4005 C4054 R4016 C4044 C4052

C4028 R4045 C4079 R4078 R4089 R4052 C4027 R4065 R4087 R4032 C4081 R4024 C4032 R4014 C4040

C4091 C4021

R2321

C8511

L8504

R2358 R2357 C2305 C2304 R2313

C4060

C4039 W860

IC4007

W841 R4048 C4041 R4054 C4077 IC4005 R4053

R4036 R4037 R4038

C4049

W824 C4026

C4009

C4067 B4005

C4083

C8542

DMG097A
C4050 C4036 C4045 C4046 C4047

B4008

CP8501

NTSC PAL

DMG097A

R4040

C4062 C4064

R2332 R2333 R4023 R4062 C4055 C4057 C4004 C4033 C4086 R4061 R4002 C4003 R2335 R2336 R4063 W807 R4003 C4056 C4001 C4007 R4060 R2334 R4004 R4005 C8510 R4086

C2333

Q2301

Q2302

C4095

MPEG
IC4001

G-3

22LV505

G-4

G-5
W840 C6564 B3011 B3012 W861 Q3411 Q3410 B3009 B3010 L6561 D3402 D3403 CP4301 CP3001 W812 C4318 C4323 IC6554 C6580 C3022 C6576 IC6555 IC6558 C3043 R4305 L3004 C6571 C6570 C3013 IC6557 L3005 C6574 C6577 C6579 R3004 R3003 R6582 R6588 R6581 R6586 C6575 Q3002 Q3001 C4313 C4317 W850 W849 W847 W851 R4334 R4340 W867 R4344 R4332 W856 R3039 R3038 W857 R4304 W871 CP4303 R4303 IC6553 R3032 IC6552 R3031 C3038 IC3007 R3033 R3034 C3054 IC3009 R3037 C3055 D3005 C3027 C3026 C3024 R4318 C4312 J4302 C4314 X2802 R4319 R3618 C2923 B2810 B2820 C2891 R2810 R2811 R2806 C2808 R3641 R3632 R3643 Q3610 C3611 C3610 Q3603 C3618 C3615 R3635 C3614 R3634 A1 R3612 C2883 X3601 X2801 NR2812 C2975 R2871 R2816 C2880 A21 C2867 C2866 C2809 R2812 C2810 R2814 C2811 R2813 C2812 R2815 B2811 B2821 Q3608 Q3607 R3631 R3630 R3602 R3603 R3604 D3601 R3621 R3619 C2921 D3602 L3603 J4301 B6552 B6553 B6554 CP3602 L3604 C2937 C2932 C2905 C2939 C2924 B2816 B2817 B2814 B2815 B2822 C2914 B2813 C2948 C6557 B4301 R6562 C4302 R6561 W878 C5801 C5819 C5814 L5801 TU5801 X6201 C6221 D6209 CD6203 D6212 C6561 C6562 C5803 R6558 R6559 C2946 C2931 C2940 C2933 C2944 C2936 C2947 AA21 AA1 C2918 C2929 R2837 R2840 L5805 C5846 Q5803 C5844 R5819 R5820 C5845 C5821 R5802 R5801 R5807 C5820 W914 CD6202 R6235 R6231 R6233 C2860 C3047 R5816 R5815 C2943 C2945 C2935 R2842 R2839 R2838 C5855 C5847 Q5804 R5823 R5821 R5817 R5818 R5822 C5822 R5803 R5804 B6201 B6202 IC2801 R2823 IC2802 R2826 R2825 R2817 NR2806 NR2808 NR2807 R2827 R2824 B2800 R2820 C3023 C2802 R3018 C2882 R3016 C2877 C2806 C2974 C2869 NR2813 NR2811 NR2810 R2800 R2830 R2846 C2959 C2965 R2850 CP2804 A1 R1 A9 R9 C3048 L3003 3 C2807 C6213 C6215 C6212 R6216 R6213 R6206 R6221 C6216 R6225 R6223 R6224 R6228 R6227 R6205 R6219 R6214 R6215 B3022 C3065 CP3002 L3001 B3023 C3066 D3007 B3003 B3013 B3016 C2876

PRINTED CIRCUIT BOARDS DIGITAL (TOP SIDE)

CEG360A
R2856 C2968 IC2805

CP2803

CP6201

W862 W864

C6205 CP2801

19LV505/19LV506
G-6

G-7
C5818 R5813 C5824 C5823 C5833 C5834 C5835 C6210 R6222 R6220 Q5802 C5825 C5826
25 17

Q6203 Q6201 Q6202

Q6204

IC5801

R6211 R6212

R5808 R5809 R5810 R5812 C5837 C5838 C5839 R6210 R6209


1

CEG360A

R5811 C5827 C5840 D6205 C5830 R6217 C6209 R6203 IC6201 C5841 R6204 IC6202

C6218 R6226 R6236


9

R6551 R6552 IC6556 C4301 R4301 R4306 R4302 C5806 B5801 R6566 C2976 C2977 IC6551 C2951 R6560 NR6551 R6563 R6567 Q4301 C6559 R6569 C6555 C6556 C6560 X6551 C2950 W881 R2857 R2841 R2853 C2925 R5825 R5824 R2874 C2926 C2908 C2920 C2911 C2907 C2906 C2934 C2910 C2938 C2903 C3612 R3629 IC3602 C2927 C5853 C2949 C5852 C2912 R3610 R3614 R3616 C3613 R3633 C3616 R2808 B3601 C3605 C3603 R2809 D3611 D3607 R2807 C2803 R4316 B4303 B4304 R4317 R2802 R6585 R6583 R6578 R6580 C6583 R6579 C6567 C6563 R4343 W842 C6566 R6572 W844 R6556 C6584 R6555 C6553 C6565 R6573 C6551 R4346 C4320 C6568 R4347 W846 C6581 R6590 R6587 R6589 R6584 C4303 B6551 C6554 W884

Q5801 C5810 C5812 C5811 C5804 C5809 C5817 C5805 B5804 B5803 B5802 C2831 C2838 C2840 C2836 R4307 R4309 C4304 R4310 B4302 C4306 R2818 C2822 NR2809 C2849 C2855 C2846 C2853 C2843 C2847 R2829 C2851 C2848 C2872 C2871 C2879 R2836 R2835 C2868 C2874 C2881 C2857 C2858 C2856 C2861 C2854 C2852 C2859 NR2805 R2819 C2824 C2821 C2826 C2825 R2828 C2844 C2850 C2889 C2845 C2892 C2888 C2842 C2895 C2886 C2875 C2841 C2899 C2884 C2887 C2885 C2890 C2897 C2894 C2893 C2919 C2942 C2900 C2922 C2902 C2898 C2904 C2896 C2901 C2917 C2909 C2913 C2941 IC2804 R3434 C4319 B6556 R4330 R4329 C6569 R3433 R2805 D3002 B3008 C3002 C3004 R3002 C3003 R3010 Q3005 C3042 C3041 R3040 NR2804 NR2802 NR2803 R3005 NR2801 B2801 R3008 C3016 D3006 Q3010 B3015 R3412 R3413 Q3404 C3413 R3421 R3431 Q3409 R3428 Q3407 Q3009 R3035 C3040 Q3402 R3405 D3401 C3039 Q3006 R3427 B3014

R3007

D3003

IC3003

R3015 R3017 R3013 C2815 C2813 C2816 C2814 C2819 C2817 C3018

PRINTED CIRCUIT BOARDS DIGITAL (BOTTOM SIDE)

B2807

B2806

R3009 IC3001

D3004 B3017

C2823 C3056 C3021 B3005 B3004

C2818 C2820

B2803 B2804

R2849 R2847 B2809 B2808

B2805 B2812 C3015 W832 L3002 C3029 Q3011 C3031 R3023 R3025 R3024 R3019 C3017 Q3003 C3012 C3011 R3020 C3019 B3006 B3007 R3022 C3014 IC3002 Q3004 R3014 R3043

R3042 R3045 Q3007 R3041 Q3008

W852 W853

19LV505/19LV506
G-8

W849

R4334 R4340 W867 R4344 R4332 C6571


AV SW

R4304

W871

C6570

R4303

IC6553 R3032

IC6552

R4318 C4312 J4302 C2802

C4314 R4319 R3618 C2923 B2810 B2820 C2891 R2810 R2811 C2808 R3643 Q3610 R3612

C2883 X3601 X2801 X2802

C3618 C3615 R3635 C3611 R3641 R3632 C3610 C3614 R3634


A1

R3631 R3630

Q3608 Q3607

R3603 R3604 D3601 R3621 R3619 B2821 C2921 D3602

L3604

C2937 C2932 C2905

C2946
NTSC

C2940 C2931 C2943

CP2804

NR2806

C2935 C2945

C2939

C2924 B2816 B2815 W915 B2822

AA21

C2918 B2817 B2813 C2929 R2837 R2840

R2826

R2817

R2825

C2914

R2842 R2839 R2838 C5855

C2948

J4301 B6552 B6553 B6554

C6557 R6558 B4301 R6562 C4302 R6561 W878 C6561 C6562 R6559 C5803

L5805 C5846 Q5803 C2860 C3047 R5816 R5815


TUNER

CEG360A

C5819 C5814 L5801

C5801

R5802 R5801 R5807 C5820

TU5801 X6201

W914

C6221

22LV505 G-10

CD6203

IC6557

IC6558

G-9
C6564 W840 B3011 B3012 W861 Q3411 Q3410 B3009 B3010 L6561 D3402 CP3001 D3403 CP4301 W812 C4318 R6582 R6588 C4323 R6581 R6586 C6575 Q3002 IC6554 C6580 C3022 L3005 C3043 C6576 IC6555 R4305 L3004 C3013
REGULATOR

W856 R3039 R3038 W857

C4313 C6574 C6577 C6579 Q3001

C4317

R3004 R3003 W847

W850

W851

CP4303 R3031 C3038 IC3007 R3033 R3034 C3054


JACK

CP3002

B3022 B3023 C3065 C3066

L3001

D3007

B3003 IC3009 R3037 D3005 C3027 C3026 C3024

C2877 C2806

C3055

B3013 R3018 C2882 R3016 B3016

C2974

C2869

C2876

SCALER

C2809 C2811 C2810 NR2813 NR2812 C2880


A21

B2811

Q3603

R2806

R2812 R2814 R2813 R2815 C2812

C2975 R2871 R2816 NR2811

C2867

C2866

R3602 L3603 CP3602 R6235 R6231 R6233 D6209 D6212 C2933 C2944 C2936 C2947
AA1

NR2810

IC2801 NR2808 C5847 R5821 R5817 R5818 R5822 Q5804 NR2807 R2824

R2800 R2830 R2846 C2959

C2965 R2850

A9

A1

IC2802

R2823

R1

R9

PRINTED CIRCUIT BOARDS DIGITAL (TOP SIDE)

R5823

R2827

B2800

R2820 C3023

C5844 R5819 C5845 R5820 CD6202

C5822 R5803 C5821 R5804

C3048

L3003

C2807

C6213 C6215 C6212 R6221 C6216 R6225 R6216 R6213 R6223 R6224 R6206 R6228 R6227 R6205 R6219 R6214 R6215 R2856 C2968 IC2805

CP2803

CP6201

W862 W864

C6205 CP2801

MICON

B6201 B6202

G-11
Q6203 R6220 C6210 R6222 Q6204 C5818 R5813 C5824 C5823 Q6201 Q6202 Q5802 C5825 25 17 R6211 R6212 IC5801 R5808 R5809 R5811 C5827 1 R6210 R6209 R6217 IC6202 9 C6209 R6203 D6205 R6204 IC6201 C5830 C5805 B5803 B5802 C5806 B5801 R6566 C2976 C2977 R6567 IC6551 R6563 C2840 NR6551 R6560 C2951 IC3003 C2838 C5804 C5809 C5810 C5812 C5811 C5817 C2831 C2836 Q5801 B5804 R6551 R6552 IC6556 C4301 R4301 R4306 R4302 R4307 R4309 C4304 R4310 R6569 C6555 C6559 C6556 C6560 X6551 C2950 B4302 W881 R2857 R2841 R2853 C2925 B3601 C3605 C3603 Q4301 R5825 R5824 R2874 C2926 C2908 C2920 C2911 C2907 C2906 C2934 C2910 C2938 C2903 C3612 R3629 IC3602 C2927 R3610 R3614 R3616 C3613 R2808 D3611 R4316 B4303 B4304 R4317 R2802 D3607 R2807 R3633 C3616 R2809 C2803 R6585 R6580 R6583 R6578 Q3009 R6579 C6567 C6583 B3008 C3002 R3002 C6563 R4343 W842 C6566 R6572 W844 R6556 R6555 C6584 C6553 C6565 R6573 C3042 C6551 Q3010 C4320 B6556 C6568 R4347 W846 C6581 R6584 R6590 R6587 R6589 R4330 R4329 C6569 B3015 R3413 R4346 C3041 R3040 B3004 B3005 C3021 Q3006 C3019 C4319 R3035 C3040 B3014 C3004 C3003 R3010 Q3005 C3039 R3025 R3023 R3024 C4303 B6551 W884 C6554 C4306 C5837 C5838 C5839 C5840 C5841 C5826 R5810 R5812 D3003 C5833 C5834 C5835 C6218 R6226 R6236 R3007 R3015 R3017 R3013 C3018

PRINTED CIRCUIT BOARDS DIGITAL (BOTTOM SIDE)

CEG360A

NR2809 C2849 C2855 C2846 C2853 C2847 C2843 C2858 C2856 R2829 C2851 C2848 C2872 C2871 C2879 R2836 C2874 C2881 NR2805 C2857 C2861 C2854 C2852

C2824 C2821 C2826 R2818 R2819 C2822 C2823 C2825

C2815 C2813 C2816 C2814 C2818 C2820 C2819 C2817

R2828 C2844 C2850 C2889 C2845 C2892 C2888 C2842 C2895 C2886 C2875 C2841 C2899 C2884 C2887 C2885 C2890 C2897 C2894 C2893 C2919 C2942 C2898 C2900 C2922 C2902 C2904 C2896 C2901 C2917 C2909 C2913 C2941 C2949 C5852 C5853 C2912 IC2804 R3434

C2859

R2805

C3056

C3029

C3031

R3433

D3002

R2835 C2868 B2807 B2806 R3005 R3009 B2801 R3008 C3016 IC3001 NR2803 NR2804 NR2802 NR2801 D3006 Q3404 C3413 R3421 R3431 Q3409 R3428 Q3407 R3405 D3401 R3412 D3004 Q3402 R3427 B3017

B2803 B2804

R2849 R2847 B2809 B2808 B2805 B2812 C3015 W832 L3002 W852W853

Q3004

IC3002

Q3003

Q3011

R3020 B3006 B3007

R3022

R3019 C3017 C3012 C3011 C3014

R3014

R3043 Q3007 R3041

R3042 R3045 Q3008

22LV505 G-12

PRINTED CIRCUIT BOARDS POWER/OPERATION/REMOCON (INSERTED PARTS)


SOLDER SIDE

CEG363A
SW2208 SW2202 SW2207 SW2205 SW2206 CP2201 CD7005 W031 T7001 SW2204 SW2201

FH502 C507

CD7006 SW2203 W013

C506

F501

C7033

R7049 R7050 W023 R7051 D7010

C7026 D7015 D7018 C7029 W029 W020

AS MARKED. - REPLACE RISK OF FIRE

CP7601

C7030

W810 FH501 D504

W808

R7052

W019

C7022

C7020

OS7601 J501

D505

C7018

C7017

C508

D7006 D7008 R7036_1 C7006 Q7004

R7038

R7039

W024

T7002

C510

L501 R504 Q7005 R512 R7024 D7003 HS503 D515 R7035 W012 W819 C525 R7023 W821 R7022 D7009 D523 Q501 D514 W005 D512 W807 W006 HS501 W028 C502
18 C5

TH501_1 D7601 D510 R509

D7004 D7005

D7002 R7043 C7023

CEG364A

D518

D507

D508

R51 0

R309

W002

R310

W001

B501

L7001 R518 R7056 HS502

R521

T501_1

13 C5
1

R311

R308

J8102

J301

C517

R7014

R7011

W011 W836 W010

R50 5_

R507

C504

D511

C520

D516

W004 C523_1

IC505

C307 R501 W026 C516 IC501 C309 W027 W018 W017 IC502 W815

C511_1

C310

C311

R7004 W025 Q504 Q503

W014

J8104

L503

C522

R551

W835 W016 R302 R314 HS301 W008 IC301 W822 W806 C304 CP501 S803X CP8101

L504

C512 W022 W021

D517

R535

R7001

R529

R538

W032

CEG362A

C535

S803Y

G-13

19LV505/19LV506

CD301

D506
C 51 4

J8101

R511

J8103

C7602

G-14

G-15
R7605 W824 R7602 R7603 W827 W839
CEG364A

R7604

W803

W823 B308 R8119 C8107

B307

R8120 R8103 C8102 C8111 R8114

C8104 R8117 R8116 C8106

R8104

W820 B303 R8111 C8103 R8112 R8118 C8109

C8105 R8105

R8113 R8115 C8108 R8106

C8110 R8108 R8107 R8110

C320 C319

R544 R506 R502 D301

R307 R306 R304 R305 C308 C301 R545 R546 R547 C306 C305 C303 Q302

R2203

PRINTED CIRCUIT BOARDS POWER/OPERATION/REMOCON (CHIP MOUNTED PARTS)

R2204 R2205 R2201


CEG363A

R313

Q301

C7028 D7012 R7048 C503 D7022 R513 D7026 D7016 D7025 D7021 C501 C505 D509 C509_1

SOLDER SIDE

R2202 R2206

R7047 R517

R515 R523

C521

C526 R524 R525 R519

C7027 D7011

IC503

D7013 C7032 F7001

C543_1 R543 C546 D522 R536 R533 C539 C538 D521

CEG362A
C545 C531 D519 D520 R531 Q505 C7011 C7012

D7020 R7046 D7024 D7023 D7019

R7033 C7015 R7034 Q7003 C7013 R7021 R7037 IC7002 C7016

R7009 R7012 C7004 R7010 R7007

R7020 C7008 IC7001

C7034 R7053 C7035 C7025 R7054 R7044 R7041 C7024 R7040 C7019

C7009 C7010 R7013 R7017 R7030 R7018 R7032 C7003 C7002 R7026 R7025 C7007 R7019

R7006 R7005 R7008

C7001 R7003 R7002

19LV505/19LV506
G-16

C7031 D7014 D7017

PRINTED CIRCUIT BOARDS POWER/OPERATION/REMOCON (INSERTED PARTS)


SOLDER SIDE
CP2201 CEG363A SW2208 SW2202 SW2207 SW2205 SW2206 CD7005 SW2204 SW2201

C507

W031 CD7006 W013 T7001 C7033 C7026 D7018 D7015 C7022 C7029 W029

FH502

C7030

SW2203

C506

F501

R7050 W023 R7051 R7052 D7010 C7020

W810 W808 D504 FH501 OS7601 J501

W020

W024 R7038

W019

C7018

C7017

R7039 D7006

T7002

C510

D505

D7008 R7036_1 Q7004 C7006 D7004 Q7005 W028 HS503 R504 R512 C502

C508 L501 TH501_1 D7601 D510 R509

R7024

D7003

D515

D7002 C7021 R7042 D7001 D7005 R7043 C7023

R7035 W012 W819 D523 W807

CEG364A

W006 HS501

D507

D518

D508

R51 0

R309

W005

R7023 R7027 R7028 R7029 R7056 D7007 W821 R7022 D7009

Q501 D512 W002

R310

W001

C525

L7001 R518 R521 T501_1 D514

B501

HS502

R505_1

13 C5
J8102

R311

R308

J301

C517

R7011

R7014

C504

W836 W010 D516

W004 IC505 R501 C523_1 R511

D511

D506 J8101

J8103

C307

C511_1

C520

C310

C309

R7004

IC502 C522 R551

W026

W014

IC501

C311

C516

W027

W018

W017

J8104

W025 Q504 Q503 L503 C512 L504 W022

W835

W804 W016 R302 R314 HS301 W008 IC301 C304 W822 W806 CP501 S803X

W021

D517

C535

W032

R535

CP8101

R7001

R529

CEG362A

R538

S803Y

G-17

22LV505

W815

CD301

W011

R507

C7602

R7049

AS MARKED. - REPLACE RISK OF FIRE

CP7601

18 C5

C 51 4

G-18

G-19
R7605 W824 R7602 R7603 W827 W839 W803 R7604

CEG364A
R8120 R8103 C8102 C8111 R8114 C8107 R8119 C8104 R8117 R8116 C8106

W823 B308

B307

R8104

W820 B303 C8103 R8118

C8105 R8105

R8113 R8111 R8112 C8109 R8115 C8108 R8106

C8110 R8108 R8107 R8110

C320 C319

R544 R506 R502 D301

R307 R306 R304 R305 C308 C301 R545 R546 R547 C306 C305 C303 Q302

R515 R523

R2203

PRINTED CIRCUIT BOARDS POWER/OPERATION/REMOCON (CHIP MOUNTED PARTS)

R2204 R2205 R2201 C7028 D7012 R7048

R313

Q301

SOLDER SIDE

CEG363A
D7022 D7026 D7016 D7025 D7021

D509 C509_1 C503 C501 C505 R513

R2202 R2206

R7047 R517

C521 R519

C526 R524 R525

CEG362A

C7027 D7011

D7013 C7032 F7001

C543_1 R543 C546 D522 R536 R533 C539 IC503 C538 C545 D519 D520 R531 Q505 C7011 C7012 D521

C531

D7020 R7046 D7024 D7023 D7019

R7033 C7015 R7034 C7013 R7021 R7037 IC7002 C7016

R7009 R7012 C7004 R7010 R7007

R7020 C7008 IC7001

C7009 C7010 R7013 R7017 R7030 R7018 R7032 C7002 C7003 R7026 R7025 C7007 Q7003 R7019 C7014 R7045 C7034 R7053 C7035 C7025 R7054 R7044 R7041 C7024 R7040 C7019 C7031 D7014 D7017

R7006 R7005 R7008

C7001 R7003 R7002

22LV505

G-20

PRINTED CIRCUIT BOARDS SW


SOLDER SIDE

SW2

WH

DED020A

CD2301

BR

YE M2601

M2602

G-21

GR

19LV505/19LV506/22LV505

MPEG/MICON/DSP/RF_AMP SCHEMATIC DIAGRAM


8
TRACK_PWM FOCUS_PWM DVD_LD CD_LD (VR_CD)MD_DVD (VR_DVD)MD_CD SLED_PWM SPINDLE_PWM OPU_F SPDL_SENS+ OPU_E SPDL_SENSOPU_D OPU_C OPU_B OPU_A VC

(DVD MT PCB)
RF

JG001 JG002 JG003 JG004 JG005 JG006 JG007

C4038

0.01 B C4056 0.027 B

BOOT1 D4005 MA111 DUPTD1 DUPRD1 DUPTD0 DUPRD0 C4033 0.1 F P.CON+5V_D 10P CH 4.7K 4.7K 4.7K 4.7K F 0.1

C4085 0.001 B

R4019 4.7K TACT_OFFSET FACT_OFFSET R4018 4.7K

BOOT2

C4057 180P CH C4001 0.0039 B

VDDPWM

C4003

0.027 B

(D_GND) (AFEGND) (RF_GND) 6.3V 47 SJV 6.3V 47 SJV (A_GND) 0.1 F

0.001 B

C4058 0.001 B

6.3V 47 SJV

JG009

C4055 0.001 B B4016 EBMS160808A102_RDC45 R4043 390 +-1% R4022 C4004 0.1 F 15K +-1%

39K 0.1 F 15K 560P CH

JG008

0.01B

11K 11K

0.1 F

C4015

C4105

R4037

R4036

R4038

R4039

C4006 C4086

4.7K

R4060 R4061 SGND R4062 C4002 R4063 C4059

C4075

0.1 F

R4023

0.1 F C4072

C4070

C4021

C4067

C4071

C4076

RFINN RFINP

FROM/TO MOTOR DRIVE VDDDAC VDDAFERF B4002 B4003 EBMS160808A102_RDC45 (185mA) EBMS160808A102_RDC45(120mA) (21mA) TIN D4008 MA111 TIN_SW TRAY_OPEN TRAY_CLOSE R4045 F (D_GND) 4.7K (RF_GND) DAC_VIDEO_C/D DAC_VIDEO_B DAC_VIDEO_D DAC_VIDEO_A DAC_VIDEO_E W807 YUV W806 Y/C W807 VDDPWM3.3V GND GND HOME TOUT_SW DVD_CD DRVSB RF OPU_A OPU_B C4034 27P CH C4035 27P CH W836 adjust Xtal frequrcy R4016 100 C4091 100P CH D4002 D4003 C4005 MA111 MA111 DUPRD1 DUPTD1 DUPRD0 DUPTD0 C4044 B RESET 100P CH OPU_C OPU_D OPU_E OPU_F VC SPDL_SENSSPDL_SENS+ MD_DVD MD_CD DVD_LD CD_LD 56P CH SPINDLE_PWM SLED_PWM TRACK_PWM FOCUS_PWM (D_GND)

HD9 HD1 HD8 HD0 RD MEMCS0 HA0

V_SW

+1.8V +3.3V 0 NC 0 NC 0 NC 0 NC 3.3 0 NC 0 NC 0 NC 0 NC 0 1.8 0 NC 0 NC 1.7 1.0 0 1.6 3.3 1.8 2.4 3.3 0 0 3.3 0 0.9 1.7 2.1 0 0 0 0 2.1 2.7 2.1 2.2 2.3 2.3 3.3 2.3 2.3 3.3 1.6 1.6

B4005 B4001 (10mA) EBMS160808A102_RDC45 C4007 R4001 0.1 390 +-1%

EBMS160808A102_RDC45(130mA) P.CON+3.3V_D

105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156

52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

C4069

C4008 0.1 F C4010 0.1 F HA16 HA15 HA14 HA13 HA12 HA11 HA10 HA9 HA8 WR HA18 HA17 HA7 HA6 HA5 HA4 HA3 C4014 HA2 HA1 HA19 0.1 F

6.3V 47 SJV

+3.3V HA0 HA1 HA2 HA3 HA4 HA5 HA6 HA7 HA8 HA9 HA10 HA11 HA12 HA13 HA14 HA15 HA16 HA17 HA18 HA19 HD0 HD1 HD2 HD3 HD4 HD5 HD6 HD7 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 MEMCS0 RD WR SD_A0 SD_A1 SD_A2 SD_A3 SD_A4 SD_A5 SD_A6 SD_A7 SD_A8 SD_A9 SD_A10 SD_A11 SD_D0 SD_D1 SD_D2 SD_D3 SD_D4 SD_D5 SD_D6 SD_D7 SD_D8 SD_D9 SD_D10 SD_D11 SD_D12 SD_D13 SD_D14 SD_D15 RAMCS0# RAMCS1# RAMRAS# RAMCAS# SD_BA0 RAMDQM RAMWE# RAMCLK RAMCKE

HD2 HD10 HD3 HD11 HD4 HD12 HD5 HD13 HD6 HD14 HD7 HD15

GNDC RAMADD(9) RAMADD(11)/GPO(64) RAMCS0# RAMBA RAMCS1#/GPO(65) RAMRAS# RAMCAS# VDDP GNDC RAMWE# RAMDQM GNDPCLK PCLK VDDPCLK RAMDAT(8) RAMDAT(7) RAMDAT(9) RAMDAT(6) VDDP GNDC RAMDAT(10) RAMDAT(5) RAMDAT(11) RAMDAT(4) RAMDAT(12) RAMDAT(3) VDDP GNDC RAMDAT(13) RAMDAT(2) VDDC RAMDAT(14) RAMDAT(1) RAMDAT(15) RAMDAT(0) VDDP RAMDQM2/RAMCKE/GPO(66) GNDC RAMCKE/SDI_PSC/GPIO(10) GPAIO/IGPIO(11) APWM7+/GPIO(12) APWM7-/GPIO(13)

SD_A4 SD_A3 SD_A5 C4016 SD_A2 SD_A6 SD_A1 SD_A7 C4013 0.1 F 0.1 F

2.4 2.4 2.2 2.2 1.7 2.0 2.2 1.2 1.9 1.5 0 2.5 1.9 1.8 3.3 2.5 3.3 NC 0.7 0.6 0.6 1.0 2.5 0.7 1.0 2.4 3.3 0 2.8 1.7 0 0 1.7 1.7 1.7 3.3 1.0 2.6 0 3.3 NC 0 NC0 0 1.6 1.6 1.6 3.3 0 0.7 1.6 1.2 1.6 1.8

C4042

R4054 1K R4053 1K C4077 0.1 F 6.3V 47 SJV

NC

NC NC

NC NC NC NC NC

0.1 F

0 MEMDAT(2) GNDDACBS2 1.3 MEMDAT(10)/GPIO(0) RSET 1.3 MEMDAT(3) DAC1 3.3 MEMDAT(11)/GPIO(1) VDDDAC 1.2 MEMDAT(4) DAC2 1.2 MEMDAT(12)/GPIO(2) DAC3 3.3 MEMDAT(5) VDDDAC 1.1 MEMDAT(13)/GPIO(3) DAC4 0 MEMDAT(6) GNDDAC_D 1.1 MEMDAT(14)/GPIO(4) 160 A DAC5 208 VDDP 1.4 R4042 100 GNDC XIN 159 VDD1AFE 1.6 207 GPIO(9)/MEMDAT(9) MEMDAT(7) XO 1.8 158 RFN MEMDAT(15) VDDPLL 206 MEMDAT(1) 0 VDDC GNDPLL 157 RFP 205 GPIO(8)/MEMDAT(8) 3.3 VDDP RESET# 0 MEMADD(16) GNDC 204 MEMDAT(0) 1.8 MEMCS1#/GPIO(5) VDDC 203 MEMRD# 3.3 MEMADD(15) GPIO(48)/DUPRD1 3.3 202 MEMCS0# MEMADD(14) GPIO(47)/DUPTD1 3.3 MEMADD(13) GPIO(46)/DUPRD0 3.3 MEMADD(12) GPIO(45)/PWMCO(5)/DUPTD0 3.3 MEMADD(11) VDDP R4052 4.7K 3.3 MEMADD(10) IGPIO(44) 3.3 R4065 4.7K MEMADD(9) GPIO(43)/TDO SSCTXD 3.3 R4087 4.7K MEMADD(8) GPIO(42)/TCK SSCCLK 3.3 R4032 4.7K MPEG/MICON/DSP/RF_AMP IC MEMWR# GPIO(41)/TDI/NMI SSCRXD 0 MEMADD(18)/GPIO(6) GPIO(40) IC4001 0 ZR36966ELCG-D MEMADD(17) GPIO(39) 3.3 MEMADD(7) GPIO(38) 3.3 MEMADD(6) IGPIO(37)/TMS/NMI 0 GNDC GPIO(36) 0 MEMADD(5) GPIO(35) 110 GNDAPWM 100 APWM6+/GPIO(14) 3.3 MEMADD(4) GPIO(34)/RAMCKE/SPDIFIN 111 IGPIO(23)/APWM2+ 3.3 R4024 4.7K 101 APWM6-/GPIO(15) 53 RAMADD(0) MEMADD(3) GPIO(33)/AIN/SPDIFIN 1.6 112 GPIO(24)/AOUT(2)/APWM2VDDP GPIO(32)/SPDIFO 102 APWM5+/GPIO(16) 54 RAMADD(8) 0 NC MEMADD(2) GPIO(31)/ABCLK 113 GPIO(25)/APWM1+ 103 APWM5-/GPIO(17) 0 NC 55 RAMADD(10) MEMADD(1) GPIO(30)/ALRCLK 3.3 104 AIN/SPDIFIN/GPIO(18) MEMADD(19)/IGPIO(7) VDDP 56 VDDP 0 USBVDD GPIO(29)/AMCLK NC 105 VDDAPWM 0 USBDP/GPO(67) GNDC 1.6 104PIN FPCSTRB 106 GPIO(19)/PWMCO(5)/APWM4+ USBDN/GPO(68) GPIO(28)/AOUT(0)/APWM01.6 FOR PLAYER USBGND GPIO(27)/APWM0+ 107 GPIO(20)/APWM41.6 RAMADD(4) GPIO(26)/AOUT(1)/APWM11.6 108 GPIO(21)/APWM3+ RAMADD(3) 0 RAMADD(5) NC 109 GPIO(22)/AOUT(3)/APWM30 94PIN STBY_L VDDIP NC 0 GNDC FOR PLAYER 0 NC RAMADD(2) 3.3 RAMADD(6) NC 0 RAMADD(1) NC 0 RAMADD(7) NC R4009 3.3 VDDC 33 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101102103104 0 0 3.3 0 0 0 0 0

MEMADD(0) GPIO(63)/MEMCS2# GPIO(62)/FCU_IORD# GPIO(61)/FCU_IOWR# GPIO(60)/FCU_SCLK GPIO(59)/FCU_CS2# GPIO(58)/FCU_CS3# GPIO(57)/FCU_WAIT# GPIO(56)/FCU_RST IGPIO(55)/FCU_IRQ GNDC VDDC IGPIO(54)/PWMCO(5) GPIO(53)/PWMCO(4) GPIO(52)/PWMCO(3) GPIO(51)/PWMCO(2) GNDPWM GPIO(50)/PWMCO(1) VDDPWM GPIO(49)/PWMCO(0) DVD_LD CD_LD DVD_MD CD_MD VDDSAFE GNDREF RESLOAD VREF VC GND1AFE H G GNDAFE F K E J D C VDDAFE B

3.3 1.9 1.5 1.5 1.5 2.9 2.9 2.4

FROM/TO MEMORY

208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157

75 +-1% R4005

75 +-1% R4004

75 +-1% R4003

W836 52 C4028

R4012 1M X4001 100GT02727 27MHz 0.1 F

75 +-1% R4002

75 +-1%

R4086

C4079

0.001

C4051 0.1 F R4078 4.7K R4089 4.7K C4027 0.01 B IRRCV JG029

R4067

10K

68P CH

68P CH

B4015 (DVD-L/CD-H) (MUTE-L) EBMS160808A102_RDC45 C4011 100P CH C4037 100P CH B4010 EBMS160808A102_RDC45 C4012 0.01 B R4071 150

C4096 0.001 B C4032 0.001 B

TIN DVD_CD DRVSB TOUT_SW TRAY_CLOSE TRAY_OPEN HOME SPDIF 54

68P CH

C4053 0.001 B

C4049

C4052

C4054

FROM/TO AUDIO/VIDEO

C4081 0.1 F

SYS_MUTE DAC_VIDEO_A DAC_VIDEO_C/D RESET SPDIF DUPRD1 DUPTD1 APWM_L+ APWM_LAPWM_R+ APWM_RP.CON+1.8V_D P.CON+3.3V_D P.CON+5V_D GND GND

APWM_LAPWM_L+ APWM_RAPWM_R+

C4026

0.1 F

1.0 0 0 3.3 0 0 0 3.3 0 3.3 3.3 3.3 3.3 0 3.3 1.9 0 0.5 3.3 1.8 1.3 1.2 1.2 3.3 0 1.0 1.2 2.3 1.7 1.8 2.2 3.3 0 1.7 0.8 1.8 1.2 1.2 1.2 1.3 3.3 3.3 0 1.0

B4006 (250mA) EBMS160808A102_RDC45 6.3V 220 SJV 6.3V 100 SJV C4082 0.1 F C4083 C4030

xtal GND --- D_GND JP TOP 3p BOTOM 2p

47 0.01 B

100P CH

0.1 F

0.1 F

0.1 F

0.1 F

0.1 F

C4029

C4024

C4018

C4019

R4008 C4022

C4020

C4023

C4025

C4078

R4014

TP4010

4.7K

0.1

(D_GND)

W841

PCB130 DMG097 SYS_MUTE

SD_A9 SD_A11 RAMCS0# SD_BA0 RAMCS1# RAMRAS# RAMCAS#

RAMWE# RAMDQM

RAMCLK

SD_D13 SD_D2

RAMCKE

SD_A0 SD_A8 SD_A10

SD_D8 SD_D7 SD_D9 SD_D6

SD_D14 SD_D1 SD_D15 SD_D0

SD_D10 SD_D5 SD_D11 SD_D4 SD_D12 SD_D3

53

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK.

DEBUG MODE DEL RELEASE MODE ADD

H-1

19LV505/19LV506/22LV505

H-2

MEMORY SCHEMATIC DIAGRAM


8 8

(DVD MT PCB)

FROM/TO MPEG/MICON/DSP/RF_AMP

7
FLASH IC SD_A0 SD_A1 SD_A2 SD_A3 SD_A4 SD_A5 SD_A6 SD_A7 SD_A8 SD_A9 SD_A10 SD_A11 SD_D0 SD_D1 SD_D2 SD_D3 SD_D4 SD_D5 SD_D6 SD_D7 SD_D8 SD_D9 SD_D10 SD_D11 SD_D12 SD_D13 SD_D14 SD_D15 RAMCS0# RAMCS1# RAMRAS# RAMCAS# SD_BA0 RAMDQM RAMWE# RAMCLK RAMCKE HA0 HA1 HA2 HA3 HA4 HA5 HA6 HA7 HA8 HA9 HA10 HA11 HA12 HA13 HA14 HA15 HA16 HA17 HA18 HA19 HD0 HD1 HD2 HD3 HD4 HD5 HD6 HD7 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 MEMCS0 RD WR +3.3V B4008 EBMS160808A102_RDC45 C4095 0.01 B C4099 C4009 1 B 6.3V 220 SJV IC4007 48 HA16 C4064 0.1 F 46 3 0 1.9 2.5 1.5 1.9 1.2 2.2 2.0 1.7 C4062 0.1 F HD11 HD3 HD10 HD2 HD9 HD1 HD8 HD0 RD 2.2 2.2 2.4 2.4 1.9 1.5 1.5 1.5 2.9 0 MEMCSO 2.9 2.4 R4040 3.3 VSS DQ15 DQ7 DQ14 DQ6 DQ13 DQ5 DQ12 DQ4 VDD DQ11 DQ3 DQ10 DQ2 DQ9 DQ1 DQ8 DQ0 DE# VSS CE# A0 W860 8M FLASH A13 A12 A11 A10 A9 A8 A19 A20 WE# RP# VPP WP# A19 A18 A17 A7 A6 A5 A4 A3 A2 A1 0.6 1.0 2.5 0.7 1.0 2.4 0 40 9 0 NC 3.3 C4060 0 37 12 3.3 36 13 3.3 35 14 C4039 0.1 F RAMDQM RAMCLK 0 15 W860 HA19 HA18 SD_A11 2.8 1.7 0 1.7 1.7 1.7 1.0 2.6 HA17 HA7 SD_A7 HA6 HA5 SD_A4 HA4 RAMCKE HA3 HA2 SD_A6 SD_A5 SD_A9 SD_A8 55 R4048 4.7K 16 0 330P CH RESET WR SD_D8 HA13 0 HA12 SD_D15 HA11 SD_D14 HA10 SD_D13 HA9 SD_D12 HA8 SD_D11 HA19 SD_D10 SD_D9 C4041 0.01 B C4040 0.01 B 1.2 0 1.2 1.7 3.3 1.8 2.3 0 1.0 1.2 3.3 1.8 0 0 NC 1.8 0.5 3.3 0 NC 0 0 0 1.6 1.6 1.6 1.6 0 2.5 3.3 A16 VCCQ 16M SST39VF1601-70-4C-EKE A15 A14 1 0.7 0.6 HA15 HA14 64M SDRAM IC IC4005 54 VSS DQ15 VSSQ DQ14 DQ13 VDDQ DQ12 DQ11 VSSQ DQ10 DQ9 VDDQ DQ8 VSS NC UDQM CLK CKE NC A11 A9 A8 A7 A6 A5 A4 VSS M12L64164A-7TG VDD DQ0 VDDQ DQ1 DQ2 VSSQ DQ3 DQ4 VDDQ DQ5 DQ6 VSSQ DQ7 VDD LDQM WE CAS RAS CS BA0 BA1 A10/AP A0 A1 A2 A3 VDD 1 3.3 1.3 3.3 1.2 0.8 0 2.2 1.7 3.3 1.2 1.2 0 1.3 3.3 1.9 3.3 3.3 3.3 3.3 0 3.3 0 1.0 1.2 0.7 1.6 3.3 C4047 0.1 F C4046 0.1 F RAMDQM RAMWE# RAMCAS# RAMRAS# RAMCS1# SD_BA0 RAMCS0# SD_A10 SD_A0 SD_A1 SD_A2 SD_A3 SD_D7 C4045 0.1 F SD_D5 SD_D6 SD_D3 SD_D4 C4036 0.001 B C4050 0.01 B SD_D1 SD_D2 SD_D0

47

45

HD15 HD7 HD14 HD6 HD13 HD5 HD12 HD4

53

44

52

51

43

50

42

49

48

41

47

46

39

10

45

44

11

10

11

38

43

42

41

40

39

38

34

37

33

35

36

34

32

17

21

20

19

18

17

16

15

14

13

12

33

31

18

32

31

30

19

30

29

20

28

29

28

26

27

23

22

21

27

26

25

24

23

22

3
24 HA1

FROM AUDIO/VIDEO

4.7K

25

HA0

2
MEMCS0 D_GND

P.CON+3.3V_D GND RESET

PCB130 DMG097

1
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK.

H-3

19LV505/19LV506/22LV505

H-4

MOTOR DRIVE SCHEMATIC DIAGRAM


8

(DVD MT PCB)
DVD_CD MD_DVD (VR_CD) MD_CD (VR_DVD) DVD_LD VC R2360 CD_LD

C2350

C2328 C2348 C2329 0.1 B 6.3V 22 SJV 6.3V 22 SJV

DSM2(06SD)
FROM/TO LOADER

0.1 B

33

FROM/TO MPEG/MICON/DSP/RF_AMP MD_DVD MD_CD DVD_CD DVD_LD CD_LD RF GND OPU_A OPU_B OPU_C OPU_D OPU_E OPU_F VC HOME TOUT_SW TIN_SW FOCUS_PWM TRACK_PWM VDDPWM3.3V DRVSB SPINDLE_PWM TRAY_CLOSE TRAY_OPEN SPDL_SENS+ 1.2K SPDL_SENSSLED_PWM R2313 TP2307 R2308 10K R2301 R2307 1K 75K 4.7K R2310 4.7K

2 3 4 5 6 7 8 9 10 11

F Vref VCC E D C SW1(DVD/CD) VRF(RF_OUT) B A VR(DVD) VR COM VR(CD) GND LD(CD) PD/GND LD(DVD) GND NC T DRV T RTN F DRV F RTN TP2305 NC

JG012 JG026 JG014 C2334 C2335 C2336 C2337 C2338 33P CH 33P CH 33P CH 33P CH 33P CH JG013 JG040 JG025 JG016 JG011 JG010 JG027 0.1 F C2309 JG034 JG035 JG036 JG037 JG056 TR+ TRFO+ FOTP2309 TP2310 TP2311 TP2312 C2317

OPU_VREF OPU_E 0.1 B OPU_D OPU_C DVD_CD RF OPU_B OPU_A DVD/VR 0.1 F C2323

3.3K

C2333

33P CH

JG015

OPU_F

R2355

CP2301_1 LD07T2-24ND-03 1 GND

C2331 0.1 B

(RF_GND) (D_GND) 6.3V 47 SJV

W813 C2332 F C2316 B2304 EBMS160808A102_RDC45 0.1

RF_A5V W812

P.CON+A5V_D P.CON+3.3V_D

12 13 14 15 16 17 18 19 20 21 22 23

6.3V 22 SJV

CDLD C2327 DVDLD JG017 R2306 6.8 R2318 DVD LD CTL Q2301 KTA1505S-Y-RTK/P 2.6 1.9 2.3 6.8 R2332 220 C2340 6.3V 47 SJV CDLD C2341 R2352 100 R2353 100 TIN_SW C2330 10P CH TOUT_SW 0 CD LD CTL Q2302 KTA1544T-RTK/P 3.0 3.2 6.3V 47 SJV JG018

C2326

0.1 F

R2336

FOCUS_PWM 100 +-1% TRACK_PWM R2309 TP2320 R2334

390

R2339

R2319

R2324

33K

1K

10K

R2335

24

5
3.3K

DVDLD TP2303 CP2302 04_6232_105_015_800+ 5 4 3 2 1 CLOSE OPEN GND(D) LD100P CH LD+ C2321 TP2304

TP2322

VC2 R2327 15K TP2319 4.7K R2320 R2305 27K 4.7K 5.6K TP2318 R2326 FROM AUDIO/VIDEO

R2333 220 R2340 6.8 TP2308 R2338

R2321

P.CON+A5V_D P.CON+3.3V_D P.CON+6V_D (D_GND) 10K 1.6 29 VIN3 28 VIN30 NC 1.8 27 NC 26 VIN2 1.6 25 VIN21.6 24 VIN2+ 0 NC 23 NC R2337 GND M_GND TP2316

R2350

4.7K

MOT_LDMOT_LD+ JG019 P.CON+3.3V_D B2305 EBMS160808A102_RDC45

4.7K

0 44 S-GND

4.1 43 VCONT

3.2 MUTE1 42

3.2 41 MUTE234

1.6 40 VIN4-

0 NC 1.6 39 NC 38 VIN4

1.6 37 VREF-IN

0 NC 1.6 36 VREF-OUT 35 REG-OUT

0 NC 0 NC 34 NC 33 REG-IN

0 32 VIN+OP

0 31 VIN-OP

0 NC 1.6 30 VO_OP

4
C2339

R2341 6.8 MOTOR DRIVE IC LA6565VR-TLM-E

100P CH

R2330 VIN1+A PGND2 PGND1 VCCS VIN1-A VD3VD2VD1VIN 1 VCC2 VCC1 VLD+ VD4+ VD3+ VD2+ VD1+ FWD VLDVD41 0 0 2 6.0 3 4 0 NC 1.9 5 1.9 6 2.6 7 2.7 8 2.6 9 2.8 10 0 11 0 12 3.7 13 1.7 14 2.6 15 2.7 16 17 0 NC 6.0 18 6.0 19 1.6 20 1.6 21 1.6 22 R2325 6.8K TP2313 TP2314 TP2315 TP2317 REV NC NC

R2342

CP2303 04_6232_106_015_800+ 6 5 4 3 2 SW(GND) LIMIT SW SLDSLD+ SP1SP1+

4.7K

TP2306 (D_GND) R2349 100 HOME MOT_SLEDMOT_SLED+ MOT_SPDLMOT_SPDL+ 100P CH 100P CH C2360 C2358

IC2301

1K

16V 100 SJV

R2328 C2365 0.1 B 4.7K R2302 100 +-1%

0.1 C2306

100P CH

C2319

C2301

0.1 F

100P CH

100P CH

C2357

C2359

C2315 0.1 F

C2302 R2303 TP2301 TP2302 C2303 R2304

0.1 B 2.2 0.1 B 2.2 R2323 MOT_SLED+ R2329 C2307

R2357

C2310

1K 0.022 B MA111 MA111 D2303 D2304 R2358 C2304 C2305 120 0.1 B

0.1 B JG057

2
TRAY_CLOSE MOT_SPDL+ TRAY_OPEN MOT_SPDLMOT_SLEDMOT_LD+ MOT_LD-

1.2

1.2

JG058

TR+

FO+

TR-

FO-

PCB130 DMG097

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK.

H-5

19LV505/19LV506/22LV505

H-6

AUDIO/VIDEO SCHEMATIC DIAGRAM


8

(DVD MT PCB)
FROM/TO REGULATOR CP8502 (CP3002) A2001WV2-8P P.CON+6V_D 16V 100 SJV 0.1 B C8515 C8517 B8501 0.001 B HCB1608KF-121T20 C8518 GND(M) P.CON+6V P.CON+A5V B8504 EBMS160808A102_RDC45 0.001 B C8521 0.1 B B8502 EBMS160808A102_RDC45 0.1 B C8503 C8519 GND P.CON+12V P.CON+3.3V P.CON+3.3V 0.001 B C8539 GND 8 7 6 5 4 3 2 1

7
DAC_VIDEO_C/D 150P CH C8505 12P CH L8502 1uHNLV25 59 DAC_C[U]C_VIDEO 150P CH

M_GND P.CON+5V_D P.CON+A5V_D L8501 2.2uHNLV25 C8502 1 F

C8504

FROM/TO MPEG/MICON/DSP/RF_AMP DAC_VIDEO_C/D DAC_VIDEO_A RESET SYS_MUTE DUPRD1 SPDIF DUPTD1 APWM_L+ APWM_LAPWM_R+ APWM_RP.CON+1.8V_D P.CON+3.3V_D P.CON+5V_D GND TO MEMORY RESET P.CON+3.3V_D GND

C8506

6
P.CON+3.3V_D B8503 HCB1608KF-121T20 1.8V REG IC IC8502 LM1117S-ADJ ADJ 1 C8511 12P CH 150P CH C8510 C8512 L8504 1uHNLV25 150P CH 58 DAC_A[Y]_VIDEO P.CON+1.8V_D 0 OUT 2 0 IN 3 C8520 B 3.3 C8538 2.2

0.001

C8501

P.CON+A5V_D P.CON+3.3V_D P.CON+6V_D GND M_GND

R8532 APWM_LR8517 0.0012 B 47K C8530 R8530 2.2K 47K C8532 47P CH R8534 15K DUPTD1 DUPRD1 TIN_SW W825 W824 W818

R8507

TO MOTOR DRIVE

6.3V 100 SJV

1K +-1% R8508

2.2K +-1% R8509

68 +-1% C8516

FROM/TO REGULATOR CP8501 (CP3002) A2001WR-14A SSCRXD/TX SSCTXD/RX GND START_SW [U]C_VIDEO [V]Y_VIDEO [Y]_VIDEO C8534 16V 10 SJV R8539 1K SYS_MUTE 10K SPDIF D8510 MA111 56 RESET DVD RESET GND ZERO GND SPDIF-134 14 13 12 11 10 9 8 7 5 3 2 1

4
APWM_L+ R8506 16V 47 SJV 220 C8513 R8521 47K

DVD_A_OUT_L 6 16V 47 SJV DVD_A_OUT_R 4

0.1 B R8528

R8510

24K C8525

C8514

CH

0 A_GND 4

4.3 3

4.3 2 +

6.9 AUDIO_AMP IC IC8501 NJM4565M(TE1) R8537 1

47K C8528

150P

3
R8516

CH

R8527

47K C8527

10K

150P

5 4.3 4.3

6 6.9

7 10.9

VCC 8

+ -

C8526 560P CH 0.01 B 0.01 B 0.01 B 0.01 B C8542 C8537 C8536 C8543 C8541 C8544 57 560P CH 0.1 B R8536 1K R8535 10K

APWM_R+

R8522 0.0012 B 47K C8529

C8533

16V 10 SJV

APWM_R-

R8523 47K

R8529 2.2K

C8531 47P CH R8531 47K

R8533 15K

PCB130 DMG097

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

CAUTION: DIGITAL TRANSISTOR NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK.

H-7

19LV505/19LV506

H-8

AUDIO/VIDEO SCHEMATIC DIAGRAM


8

(DVD MT PCB)
FROM/TO REGULATOR CP8502 (CP3002) A2001WV2-8P P.CON+6V_D 16V 100 SJV 0.1 B C8515 C8517 B8501 0.001 B BLM18PG121SN1D C8518 GND(M) P.CON+6V P.CON+A5V B8504 EBMS160808A102_RDC45 0.001 B C8521 0.1 B B8502 EBMS160808A102_RDC45 0.1 B C8503 C8519 GND P.CON+12V P.CON+3.3V P.CON+3.3V 0.001 B C8539 GND 8 7 6 5 4 3 2 1

FROM/TO MPEG/MICON/DSP/RF_AMP DAC_VIDEO_C/D DAC_VIDEO_A RESET SYS_MUTE DUPRD1 SPDIF DUPTD1 APWM_L+ APWM_LAPWM_R+ APWM_RP.CON+1.8V_D P.CON+3.3V_D P.CON+5V_D GND DAC_VIDEO_C/D 150P CH C8505 12P CH L8502 1uHNLV25 59 DAC_C[U]C_VIDEO 150P CH

M_GND P.CON+5V_D P.CON+A5V_D L8501 2.2uHNLV25 C8502 1 F

C8504

C8506

6
P.CON+3.3V_D B8503 BLM18PG121SN1D 1.8V REG IC IC8502 LM1117S-ADJ

TO MEMORY RESET P.CON+3.3V_D GND C8510 DAC_VIDEO_A 150P CH C8511 12P CH C8512 L8504 1uHNLV25 150P CH 58 DAC_A[Y]_VIDEO P.CON+1.8V_D

C8520

C8538

ADJ 1 0

OUT 2 0

IN 3 3.3

0.001

2.2

C8501

P.CON+A5V_D P.CON+3.3V_D P.CON+6V_D GND M_GND

R8532 APWM_LR8517 0.0012 B 47K C8530 R8530 2.2K 47K C8532 47P CH R8534 15K

TIN_SW

R8507

TO MOTOR DRIVE

6.3V 100 SJV

1K +-1% R8508

2.2K +-1% R8509

68 +-1% C8516

FROM/TO REGULATOR CP8501 (CP3002) A2001WR-14A SSCRXD/TX 14 13 12 11 10 9 8 7 5 3 2 1

4
APWM_L+ R8506 16V 47 SJV 220 C8513 R8521 47K

DUPTD1

W825 W818

SSCTXD/RX GND START_SW [U]C_VIDEO [V]Y_VIDEO [Y]_VIDEO

DUPRD1

W824

C8534 16V 10 SJV 16V 47 SJV CH 0.1 B R8528 0 A_GND 4 4.3 3 4.3 2 + VCC + 5 4.3 4.3 6 6.9 7 10.9 6.9 R8537 AUDIO_AMP IC IC8501 NJM4565M(TE1) 10K 1 R8510 C8514

R8539 1K

56

RESET

DVD RESET GND

DVD_A_OUT_L 6 DVD_A_OUT_R 4 ZERO GND SPDIF-134

24K C8525

47K C8528

SYS_MUTE SPDIF

D8510 MA111

150P

3
R8516

R8527

47K C8527

10K

CH

150P

8 C8526 0.01 B 0.01 B 560P CH 0.01 B C8537 C8536 C8543 0.01 B C8542 C8541 C8544 57 560P CH 0.1 B R8536 1K R8535 10K

APWM_R+

R8522 0.0012 B 47K C8529

C8533

16V 10 SJV

APWM_R-

R8523 47K

R8529 2.2K

C8531 47P CH R8531 47K

R8533 15K

PCB130 DMG097

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

1
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK.

H-9

22LV505

H-10

MICON SCHEMATIC DIAGRAM


8

(DIGITAL PCB)
KEY_A1 KEY_B1

FROM OPERATION

TO AV SWICTH

CD6202 (CP2201) CH231204 1 GND 2 3 KEY B KEY A

W862

W864

W914 B6201 B6202 FCM1608KF-102T02 FCM1608KF-102T02 KEY_B1 KEY_A1

RESET_N

7
FROM/TO SCALER VIDEO/AUDIO

3.4

3.3 G 3.4

MCU_SCITXD SW Q6201 2SK3019_TL SW Q6202 2SK3019_TL MCU_SCIRXD I2C_DATA D S 0.5 3.3 G I2C_CLK

3.4 100

R6220

FROM WRITER SUB MICON CP6201 A2001WV-11A 1 2 3 4 5 6 7 8 9 GND TX MODE NC VCC CNVSS RX NC RESET GND GND NC NC FLASH_WRITE_TXD MODE AT+5V FLASH_WRITE_RXD RESET R6214

R6222

100

TO JACK

AUDIO_MUTE

R6215

R6219 C6210 0.1 B

4.7K

4.7K

10 11

4.7K

3.3V_POWER_H

SUR_SW

2.8 2.5 3.4 24 23 22 KEY_B IVCC IIC_OFF

0 3.4 3.4 21 20 19 AVSS VREF

NC 3.4 NC 18 17 HDMI_CEC 16 3.2 3.4 3.3 NC 3.3 3.4 3.4 0

FROM/TO FLASH C6218 0.1 B R6226 R6236 100 4.7K RESET_N IIC_OFF ASEMD0

26

DTV_RESET NC 25 KEY_A MODE EXT_MUTE AUDIO_MUTE DVD_RESET CNVSS

27

STBY-H

R6205 33K R6206 R6210 4.7K

28

32 MAIN_MICON_TXD DVD_POWER 15 ASEMD0 9 DISC_IN_DET 8 REMOCON_IN

29

SYS_POWER_H EEPROM_SDA

12

3.4 2.9

13

3.4

14

3.4

15

3.4

25

0.5

R6227 R6223 100 100 FROM/TO REGULATOR DVD_RESET 3.3V_POWER_H POWER_FAIL SYS_POWER_H START_SW LV_CTL AT+3.3V AT+5.8V GND D5.0V

30

4.7K

11

R6209 4.7K R6211 100

31

1 MAIN_MICON_RXD EEPROM_SCL RESET XOUT VSS VCC XIN

32

3.4

10

R6228 4.7K R6224 4.7K R6225 4.7K

R6235 470 R6231 FROM/TO REMOCON CD6203 (CP7601) CU251301 470 D6209 MA111

D5.0V RESET IC IC6201 PST3229NR IR_REMO 0 NC 5 NC 0 NC 4 NC R6212 OUT 1 3.4 R6203 10K R6204 10K 3.4 IN 2 0 GND 3 100 R6213

SUB MICON IC 1 IC6202 0.5 R5F21124FP

2 3 4 0 3.4 3.1

5 6 7 8 0 2.8 3.4 3.3

AT+5.8V MA111 C6221 D6212 0.1 B R6233 330 0

4.7K

4.7K

5 4 3 2 1

POWER ON LED STANDBY LED AT+5V GND REMOCON IN

R6217

5.0

5.0 SW Q6203 KRA103SRTK

1 100GT01615 16MHz X6201

IR_REMO

D6205 BAT54WS

R6216

4.7K

18P CH

20P CH

C6213

C6215

R6221 0.01 B C6205

BT001 MNAAA(R03)

BT002 MNAAA(R03)

TM101 000-103000530

6.3V 220 V-S

ACCESSORY

C6209

2.2 B (1608)

0 SW Q6204 KRC102SRTK 0

5.0

STBY-H

C6212

C6216

0.1 B

27K

2
IR_REMO

IR_REMO

STBY-H

AT+5.8V

D5.0V

PCBDH0 CEG360

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

CAUTION: DIGITAL TRANSISTOR

CAUTION: DIGITAL TRANSISTOR

H-11

19LV505/22LV505

H-12

MICON SCHEMATIC DIAGRAM


8

(DIGITAL PCB)
KEY_A1 KEY_B1

FROM OPERATION

CD6202 (CP2201) CH231204 1 GND 2 3 KEY B KEY A

W862

W914 B6201 B6202 FCM1608KF-102T02 FCM1608KF-102T02 KEY_B1 KEY_A1

W864

7
TO AV SWICTH

RESET_N 3.4 3.3 S G 3.4 SW Q6201 2SK3019_TL SW Q6202 2SK3019_TL MCU_SCIRXD I2C_DATA I2C_CLK

FROM/TO SCALER VIDEO/AUDIO 0.5 3.3 S G

MCU_SCITXD

3.4 100

R6220

R6222

100

FROM WRITER SUB MICON CP6201 A2001WV-11A 1 2 3 4 5 6 7 8 9 GND TX MODE NC VCC CNVSS RX NC RESET GND GND NC NC FLASH_WRITE_TXD MODE AT+5V FLASH_WRITE_RXD RESET R6214

TO JACK

AUDIO_MUTE

R6215

R6219 C6210 0.1 B

4.7K

4.7K

10 11

4.7K

3.3V_POWER_H

SUR_SW

2.8 2.5 3.4 24 23 22 KEY_B IVCC IIC_OFF

0 3.4 3.4 21 20 19 AVSS VREF

NC 3.4 NC 18 17 HDMI_CEC 16 3.2 3.4 3.3 NC 3.3 3.4 3.4 0

FROM/TO FLASH C6218 0.1 B R6226 R6236 100 4.7K RESET_N IIC_OFF ASEMD0

26

DTV_RESET NC 25 KEY_A MODE EXT_MUTE AUDIO_MUTE DVD_RESET CNVSS

27

STBY-H

R6205 33K R6206 R6210 4.7K

28

32 MAIN_MICON_TXD DVD_POWER 15 ASEMD0 9 DISC_IN_DET 8 REMOCON_IN

29

SYS_POWER_H EEPROM_SDA

12

3.4 2.9

13

3.4

14

3.4

15

3.4

25

0.5

R6227 R6223 100 100

30

4.7K

11

R6209 4.7K R6211 100

31

1 MAIN_MICON_RXD EEPROM_SCL RESET XOUT VSS VCC XIN

32

3.4

10

R6228 4.7K R6224 4.7K R6225 4.7K DVD_RESET 3.3V_POWER_H FROM/TO REGULATOR

R6235 470 R6231 FROM/TO REMOCON CD6203 (CP7601) CU251301 470 D6209 MA111

D5.0V RESET IC IC6201 PST3229NR IR_REMO 0 NC 5 NC 0 NC 4 NC R6212 OUT 1 3.4 R6203 10K R6204 10K 3.4 IN 2 0 GND 3

SUB MICON IC 1 IC6202 0.5 R5F21124FP

2 3 4 0 3.4 3.1

5 6 7 8 0 2.8 3.4 3.3

AT+5.8V MA111 C6221 D6212 0.1 B R6233 330 0

POWER_FAIL 100 R6213 R6217 SYS_POWER_H 4.7K 1 100GT01615 16MHz X6201 START_SW LV_CTL AT+3.3V AT+5.8V 18P CH 20P CH R6221 C6213 C6215 27K GND D5.0V 6.3V 220 V-S IR_REMO 4.7K

5 4 3 2 1

POWER ON LED STANDBY LED AT+5V GND REMOCON IN

5.0

5.0 SW Q6203 KRA103SRTK

D6205 BAT54WS

R6216

ACCESSORY

C6209

2.2 B (1608)

BT001 MNAAA(R03)

BT002 MNAAA(R03)

TM101 000-103000540

0.01 B C6205

0 SW Q6204 KRC102SRTK 0

5.0

STBY-H

4.7K C6212

C6216

0.1 B

2
AT+5.8V IR_REMO

IR_REMO

STBY-H

D5.0V

PCBDH0 CEG360

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

CAUTION: DIGITAL TRANSISTOR

CAUTION: DIGITAL TRANSISTOR

H-13

19LV506

H-14

SCALER VIDEO/AUDIO SCHEMATIC DIAGRAM


8
SCALER IC

(DIGITAL PCB)
IC2801 R8J66954BG TO JACK PC_V PC_H C2946 SW_Y_IN TU_CVBS C2937 C2939 C2938 C2940 FROM/TO JACK AV3/AV4_Y C2931 C2941 DVD-H PC_V PC_H AV3/AV4_Y VGA-G C2927 C2942 C2933 AV3/AV4_PB VGA-B AV3/AV4_PR VGA-R SPDIF VGA-B FROM/TO TUNER AV3/AV4_PR C2944 C2935 C2925 C2936 C2945 0.1 0.1 0.1 0.1 0.1 B B B B B 7 C2947 VGA-R AD_A3.3V TO HDMI HP_RST SICL V9 W9 AD_A3.3V 3.25 3.22 W884 I2C_CLK I2C_DATA C2926 C2929 0.1 B 0.1 0.1 R2837 1K B B 0.81 0 3.32 U1 VRMC U2 V1 VIN3C LPF I2C_CLK I2C_DATA 1.59 1.31 0.03 1.61 1.67 R1 VREFC R2 VRMB R3 VIN4B T1 VRPC T2 VIN2C MCU_SCIRXD MCU_SCITXD AV3/AV4_PB C2943 C2934 0.1 B 0.1 B 0.1 B 0.1 B 0.1 B 6 SW_C_IN C2932 0.1 B 5 2.02 NC 0.91 3.28 1.61 1.34 1.85 DVD-H N1 VIN2B N2 VIN6A N3 VIN5A N4 VRMA P1 VRPB P2 VREFB P3 VIN3B I2C_CLK I2C_DATA FROM/TO FLASH IIC_OFF ROUT LOUT ASW0 ASW2 ASW1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 B B B B B B B 4 3 2 3.24 3.24 3.24 0 0 1.34 0.03 1.12 1.611 C2976 LOUT_FI 1 B ROUT_FI 1 B C2977

J1 PCVIN K1 SSIN1 K2 SSIN2 L1 VIN3A L2 VIN1A L3 VIN2A M1 VREFA

AV1_CVBS

TO AV SWITCH M2 VIN4A M3 VRPA

AV1_CVBS VGA-G

FROM/TO MICON

TU_CVBS I2C_DATA I2C_CLK

FROM/TO REGULATOR S1_DET TWIRE_RXDC TWIRE_TXDC LCD-H

FROM SCALER POWER

4
FROM/TO AV SWITCH

VDIM D3.3V R2853 R2857

SW_Y_IN SW_C_IN SCLK0(GPIO) AA8 MCLK SDOUT LRCK BCLK DVD-H QBLCA J21 3.31 BL_PWM QBLCB(GPIO) J20 QBLCC(RXD0)J19 J18 Y7 RFAGC(GPIO) 3.31 0 0 SRXD0(GPIO) Y8 STXD0(GPIO) W8 3.28 3.31 3.28 ASW2 R2850 R2846 4.7K 4.7K

10K

10K

GND ASW0 ASW1 ASW2 VDIM AT+3.3V

C2959 0.1 B

C2965 0.1 B R2847 R2849 4.7K MCU_SCIRXD MCU_SCITXD IIC_OFF LCD-H TWIRE_RXDC TWIRE_TXDC

DAC_VREF

SPDIFO

V8 SCIRXD V7 SCISCK(GPIO) W7

3.301 3.26 3.31

4.7K

W6 ADATAO

ROUT LOUT

ACLK

Y6 LRCKO

AA6 BCKO

AA3 4.7K 1.68 AA4 R2840 0 V4 3.31 10K W4 R2842 0 Y5 10K

W3

W5

V5

V6

SANT

3.31

3.26

3.39

1.66 R2838 1.68

3.31

3.3

3.5

EEP ROM IC2805 M24256-BWMN6TP 1 8 0 0 0 0 A0 A1 A2 Vss Vcc WP SCL SDA 3.28 0 3.29 3.29 R2856 10K C2968 0.1 B

10V 22 V-S C2949

C2948

0.1 B

R2839

4.7K

R2874

W881

220P CH

220P CH

R2841

C2950

C2951

10K

4.7K

I2C_DATA

SDOUT

MCLK

ROUT

LRCK

LOUT

BCLK

DVD-H

SPDIF

HP_RST

S1_DET

I2C_CLK

PCBDH0 CEG360

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-15

19LV505/19LV506/22LV505

H-16

TUNER SCHEMATIC DIAGRAM


8

(DIGITAL PCB)
TU5801
23

ENG36E18KF 20 IF_O IF_OUT1 14 SDA 15 SCL 17 +5V 16 AFT 19 IF_AGC 18 IF_OUT 21 IF_OUT2 5 SIF-out 8 V_OUT 12 +30V 7 AGC 9 +5V
25

NC(BB)

NC

NC

NC

22

11 TU

NC

NC

NC

NC

NC

NC

33.7

1.8

4.9

NC

4.5

4.5

4.2

4.9

24

TO SCALER VIDEO/AUDIO 8 22uHNLV25 W878

TU_CVBS

L5801

6.3V 220 V-S C5804

0.1 B 50V(1608)

22P CH C5811

CH

C5805

0.1 B

C5803

0.1 B

C5806

C5809

C5810

C5812

CH

0.1

22P

22P

C5814

B5802 C5801 6.3V 220 V-S B5801 FCM1608KF-102T02 B5803 FCM1608KF-102T02 FCM1608KF-102T02

33P

CH

6
R5801 150K R5803 R5802 100 47K

IF_OUT_1

IF_AGC

IF_OUT_2

R5804

100

SCALER IC IC2801 R8J66954BG R5819 100 C5844 0.01 B 56P CH C5846 L5805 0.22uHLQW18AN 1.1 AA1 ADIN1

5
R5820 100 C5845 0.01 B

5
R5824 47K

1.07 R5825 47K 0.79 1.67 0.69 C5852 0.1 B C5853 0.1 B C5855 B

Y1 W2 Y2

ADIN0 VSB_ADC ADVREF0 ADVREF1

AA2 ADVREF2

FROM REGULATOR R5823 0.33 B C5820 D5.0V TUNER+30V D3.3V R5817 4.7K R5818 GND

0.1 3.28

AA7 IF_AGC

1K TUNER_IF C5847 0.1 B

4.7K

TU_AFT 3.2 G I2C0C 3.2 S 47P CH 47P CH 3.2 R5815 R5807 R5816 3.3K 100K 3.3K D S 3.2 D 4.9 I2C0D C5822 C5821 G R5821 47 R5822 47

2.81

AA5

MCUADIN0

MCU_ADC

3.28 3.28

Y9 AA9

SICL0 IIC0 SIDA0

4.9 BUFFER Q5803 2SK3019_TL

BUFFER Q5804 2SK3019_TL

B5804 FCM1608KF-151T06

C5819 6.3V 220 V-S BTSC DEMODULATOR IC IC5801 AN5832SA-E1V 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 C5818 0.22 B 0.1 B R5813 3.3K PILOT DET PLL VCC NC INPUT SIF REF STEREO REF SDA/SAPID GND PE SCL/STID AGC DET ROUT LOUT NC L-R RBF NC L+R REF SAP DET NOISE DET SIF/BB MUTE FOMO MODE AGC SW IIC/PARA SPE FIL SPE DEL SPE TIME WB DET WB TIME NC 9 10 11 12 13 14 15 16 C5823 0.33 B 3.5 3.5 0 NC 2.2 3.3 2.2 R5810 100 180K 100 5.0 0 R5811 R5812 C5827 2.2 B NC 5.0 1.7 2.2 2.2 NC 2.2 2.8 2.9 NC NC NC NC NC 5.0 2.4 2.4 0.5 2.9 0.5 NC C5837 0.022 B C5838 C5839 C5840 C5841 0.1 B 3.3 B 0.33 B 10 C

R5808

R5809

C5833 C5835

2.2 B 0.1 B

4.7K

4.7K

C5824 SIF_OUT C5817 C5825 C5826

C5834 0.033 B

FROM/TO SCALER VIDEO/AUDIO

0.001 B 4.7 2.2 B B

BUFFER Q5802 2SK3019_TL G 3.2 3.2 D S 3.2 BUFFER Q5801 2SK3019_TL 4.9 G D S 4.9

I2C_DATA I2C_CLK

3.2

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE

PCBDH0 CEG360

TO AV SWITCH

C5830

2.2 B

NC 1.3

TU_AUDIO_R TU_AUDIO_L

1
NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

H-17

19LV505/19LV506/22LV505

H-18

HDMI SCHEMATIC DIAGRAM


8

(DIGITAL PCB)

R3629

SCALER IC

IC2801

R8J66954BG

FROM SCALER VIDEO/AUDIO D3607 SS160 EEP_ROM IC IC3602 S-24CS02AFJ-TB-GE 1 8 0 FROM SCALER POWER VDD33 0 0 0 A0 A1 A2 GND VCC WP SCL SDA 4.96 4.93 4.85 4.94

B3601 HCB1608KF-181T20

470 EXT_RES 2.69 J2 EXT_RES

HP_RST

WP SCL SDA

JG3604 JG3605 JG3606 DDC_SCL DDC_SDA 4.7K

BUFFER Q3607 2SK3019_TL D S 5.0 3.3 R3630 4.7K

C3612

0.1

HDMI_SCL

3.27

G4 HDMI_SCL10

G 3.3

10K

47K

5
R3610 R3614 C3605 FROM/TO REGURATOR D3.3V D5.0V GND 0.1 B HDMI CONNECTOR CP3602 1A0300030 24 23 R3612 1K C3603 BAT54WS 0.1 B D3611

R3616

5.0

3.3 R3631

5
HDMI_SDA 4.7K 3.29 F3 HDMI_SDA10

BUFFER 3.3 Q3608 2SK3019_TL G

HDMI_POWER C3610 100GT01807 18.432MHz 8P R3621 10K C3611 10P CH C3616 0.1 B R3633 4.7K R3634 C3618 0.001 B 3.3K R3635 8.2K HDMI_CLOCK_N CH X3601 R3632

3.04

E3 PWR0

R3619

10K

R3641 1K

1M

3.3 D BUFFER 0 G Q3603 2SK3019_TL 0 S

HDMI_XIN

18.0

E1

HDMI_XIN

HDMI_XOUT

18.0

0 HPD_SW Q3610 KTC3875S_Y_RTK 0 R3618 R3602 D3601 AVRL161A1R1NT D3602 NC NC AVRL161A1R1NT 1 8 L3603 EXC28CG900U 10 R3603 R3604 22K 100 100 0.03 R3643 4.7K HP_RST

E2 HDMI_XOUT

22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 NC NC HOT PLUG +5V_POWER DDC_GND DDC_SDA DDC_SCL RESERVED CEC TMDS_CLKTMDS_CLK_SH 2 TMDS_CLK+ TMDS_DATA0TMDS_DATA0_SH TMDS_DATA0+ TMDS_DATA1TMDS_DATA1_SH TMDS_DATA1+ TMDS_DATA2TMDS_DATA2_SH TMDS_DATA2+ 7 3 6 NC NC

C3613 4.7 B

PLL_XFC_A

0.98

4
C1 PLL_XFC_A

C3614 0.0022 B

PLL_XFC_P

0.98

D1

PLL_XFC_P

C3615 0.027 B

PLL_XFC_X

1.01

D2

PLL_XFC_X

3.08 3.08 3.05 3.08 3.08 3.05 3.08 3.08

F1 RXCN F2 RXCP G1 RX0N G2 RX0P G3 RX1N H3 RX1P H1 RX2N H2 RX2P

HDMI_CLOCK_P HDMI_DATA0_N HDMI_DATA0_P HDMI_DATA1_N L3604 EXC28CG900U HDMI_DATA1_P HDMI_DATA2_N HDMI_DATA2_P

1 3 4 2

PCBDH0 CEG360

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-19

19LV505/19LV506

H-20

HDMI SCHEMATIC DIAGRAM


8

(DIGITAL PCB)

SCALER IC

IC2801

R8J66954BG

6
FROM SCALER VIDEO/AUDIO R3629 HP_RST EEP_ROM IC IC3602 S-24CS02AFJ-TB-GE 1 8 0 0 FROM SCALER POWER VDD33 0 0 A0 A1 A2 GND VCC WP SCL SDA 4.96 4.98 4.96 4.98 4.7K 10K 47K B3601 BLM18PG181SN1D WP SCL SDA D3607 SS160 470 C3612 0.1 B EXT_RES 3.3 J2 EXT_RES

JG3604 JG3605 JG3606 DDC_SCL DDC_SDA

4.96

3.32 R3630 4.7K

HDMI_SCL

3.3

BUFFER Q3607 3.32 2SK3019_TL G

G4 HDMI_SCL10

5
C3605 BAT54WS D3611 FROM REGURATOR D3.3V D5.0V GND HDMI CONNECTOR CP3602 1A0300030 24 23 0.1 B

R3610

R3614

R3616

4.98

3.32 R3631 4.7K

5
HDMI_SDA 3.3 F3 HDMI_SDA10

D G

BUFFER 3.32 Q3608 2SK3019_TL

HDMI_POWER C3610 100GT01807 18.432MHz 8P CH X3601 R3621 10K C3611 10P CH C3616 0.1 B R3633 4.7K R3634 C3618 0.001 B 3.3K R3635 8.2K HDMI_CLOCK_N R3632

E3 PWR0

C3603 0.1 B R3612 1K

R3619

10K

R3641 1K

1M

D BUFFER Q3603 0 G 2SK3019_TL 0 S

3.32

HDMI_XIN

E1

HDMI_XIN

HDMI_XOUT

E2 HDMI_XOUT

0 HPD_SW Q3610 KTC3875S_Y_RTK 0 R3618 R3602 D3601 AVRL161A1R1NT D3602 NC NC AVRL161A1R1NT 1 8 L3603 EXC28CG900U 10 R3603 R3604 22K 100 100 0.03

R3643 4.7K

22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 NC NC HOT PLUG +5V_POWER DDC_GND DDC_SDA DDC_SCL RESERVED CEC TMDS_CLKTMDS_CLK_SH 2 TMDS_CLK+ TMDS_DATA0TMDS_DATA0_SH TMDS_DATA0+ TMDS_DATA1TMDS_DATA1_SH TMDS_DATA1+ TMDS_DATA2TMDS_DATA2_SH TMDS_DATA2+ 7 3 6 NC NC

HP_RST C3613 4.7 B C3614 0.0022 B C3615 0.027 B PLL_XFC_A 0 C1 PLL_XFC_A

PLL_XFC_P

D1

PLL_XFC_P

PLL_XFC_X

0 D2 PLL_XFC_X

3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3

F1 RXCN F2 RXCP G1 RX0N G2 RX0P G3 RX1N H3 RX1P H1 RX2N H2 RX2P

HDMI_CLOCK_P HDMI_DATA0_N HDMI_DATA0_P HDMI_DATA1_N L3604 EXC28CG900U HDMI_DATA1_P HDMI_DATA2_N HDMI_DATA2_P

1 3 4 2

PCBDH0 CEG360

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-21

22LV505

H-22

LVDS SCHEMATIC DIAGRAM


8

(DIGITAL PCB)

SCALER IC

IC2801

R8J66954BG

LVDS1OUT0M A19 LVDS1OUT0P B19 B2806 HCB1608KF-221T20 B2807 16V 10 V-S 16V 10 V-S HCB1608KF-221T20 C2974 C2874 0.1 B C2880 0.1 B C2975 3.31 3.32 LVDS1OUT1M A20 LVDS_CH1 LVDS1OUT1P A21 LVDS1OUT2M B20 LVDS1OUT2P B21 0 2.69 D14 A18 PLLAVSS PLL POWER PLLAVSS LVDS1CLKOUTM C19 LVDS1CLKOUTP D19 LVDS1OUT3M C20 LVDS1OUT3P C21 LVDS1OUT4M D20 LVDS1OUT4P D21

2.69 2.69 2.69 2.69 2.69 2.69 2.69 2.69 2.69 2.69

NR2812 CRA108220JV

CH1_TXOUT0CH1_TXOUT0+

FROM/TO PANEL CP2804 A2006WV0-2X15P

CH1_TXOUT1CH1_TXOUT1+ NR2813 CRA108220JV CH1_TXOUT2CH1_TXOUT2+ CH1_TXCLKOUTCH1_TXCLKOUT+ R2816 22 R2871 22 CH1_TXOUT3CH1_TXOUT3+

C15 A17

PLLAVCC_1 PLLAVCC_2

RXE0RXE1RXE2RXECRXE3GND RXO0RXO1RXO2RXOCRXO3GND NC /(GND) NC /(GND) RXE0+

30 29 28 27 26 25 24 23 22 21 20 19 18 17 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 V2801_1 T190PW01_V0 LCD PANEL LVDS CD2804 EA2U2503

FROM REGULATOR

GND D3.3V B2808 D1.0V VDD_PANEL HCB1608KF-221T20 B2809 4V 47 V-S C2875 4V 47 V-S HCB1608KF-221T20 C2869 C2881 0.1 B C2877 0.1 B

1.048 1.04

E13 B17

PLLDVDD_1 PLLDVDD_2

NC NC

VDD+5V/+3.3V 16 0 1.03 E14 D15 PLLDVSS PLLDVSS LVDS0OUT0M E19 LVDS0OUT0P F19 1.59 E18 D18 LPFP REFR LVDS0OUT1M E20 LVDS0OUT1P E21 1.52 1.52 1.52 1.52 NR2811 CRA108220JV RXE1+ CH0_TXOUT0CH0_TXOUT0+ CH0_TXOUT1CH0_TXOUT1+ RXE2+ RXEC+ RXE3+ GND RXO0+ RXO1+ 1.44 1.33 1.1 1.37 R2800 22 R2830 22 NR2810 CRA108220JV CH0_TXOUT2CH0_TXOUT2+ RXO2+ RXOC+ RXO3+ CH0_TXCLKOUTCH0_TXCLKOUT+ CH0_TXOUT3CH0_TXOUT3+ GND GND VDD+5V/+3.3V LVDS0OUT3M G20 LVDS0OUT3P G21 1.42 1.17 VDD+5V/+3.3V

R2835

1K

2.69 R2836 5.6K

0.01 B

C2868

LVDS_CH0 LVDS POWER/REF

D17

VSS33BIAS

LVDS0OUT2M F20 LVDS0OUT2P F21 LVDS0CLKOUTM G18 LVDS0CLKOUTP G19

B2804

3.3 3.28 3.3 0.1 B

HCB1608KF-221T20 B2805 10V22 V-S C2871 10V22 V-S C2879 HCB1608KF-221T20 C2866 0.1 B C2876

F17 E17 F18

VCC33BIAS VCC33LVDS VCC33LVDS

0 0 1.04

E16 G17 H17

VSS33LVDS VSS33LVDS VCC10LVDS

LVDS0OUT4M H20 LVDS0OUT4P H21

NC NC

B2803 HCB1608KF-221T20 4V47 V-S C2872 C2867 0.1 B

RSDSA H18 RSDSB H19 0 J17 VSS10LVDS

NC NC

B2800 HCB1608KF-181T20

PCBDH0 CEG360

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

H-23

19LV505/19LV506

H-24

LVDS SCHEMATIC DIAGRAM


8

(DIGITAL PCB)

SCALER IC

IC2801

R8J66954BG

LVDS1OUT0M A19 LVDS1OUT0P B19 B2806 HCB1608KF-221T20 B2807 16V 10 V-S C2975 16V 10 V-S HCB1608KF-221T20 C2974 C2874 C2880 0.1 B 0.1 B 3.3 LVDS1OUT1M A20 LVDS_CH1 LVDS1OUT1P A21 LVDS1OUT2M B20 LVDS1OUT2P B21 0 0 D14 A18 PLLAVSS PLLAVSS PLL POWER LVDS1CLKOUTM C19 LVDS1CLKOUTP D19 LVDS1OUT3M C20 LVDS1OUT3P C21 LVDS1OUT4M D20 LVDS1OUT4P D21

1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

NR2812 CRA108220JV

CH1_TXOUT0CH1_TXOUT0+

TO PANEL CP2804 A2006WV0-2X15P

3.3

CH1_TXOUT1CH1_TXOUT1+ NR2813 CRA108220JV CH1_TXOUT2CH1_TXOUT2+ CH1_TXCLKOUTCH1_TXCLKOUT+ R2816 22 R2871 22 CH1_TXOUT3CH1_TXOUT3+

C15 A17

PLLAVCC_1 PLLAVCC_2

RXE0RXE1RXE2RXECRXE3GND RXO0RXO1RXO2RXOCRXO3GND GND GND RXE0+

30 29 28 27 26 25 24 23 22 21 20 19 18 17 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

6
FROM REGULATOR GND D3.3V

B2808 D1.0V VDD_PANEL HCB1608KF-221T20 B2809 4V 47 V-S C2875 4V 47 V-S HCB1608KF-221T20 C2869 C2881 C2877 0.1 B 0.1 B

1.0 1.0

E13 B17

PLLDVDD_1 PLLDVDD_2

NC NC

VDD+5V/+3.3V 16 0 0 E14 D15 PLLDVSS PLLDVSS LVDS0OUT0M E19 LVDS0OUT0P F19 1.4 E18 D18 LPFP REFR LVDS0OUT1M E20 LVDS0OUT1P E21 1.6 1.6 1.6 1.6 NR2811 CRA108220JV RXE1+ CH0_TXOUT0CH0_TXOUT0+ CH0_TXOUT1CH0_TXOUT1+ RXE2+ RXEC+ RXE3+ GND RXO0+ RXO1+ NR2810 CRA108220JV CH0_TXOUT2CH0_TXOUT2+ RXO2+ RXOC+ RXO3+ 1.6 1.6 R2800 22 R2830 22 V2801_1 T220SW01_VO E16 G17 H17 VSS33LVDS VSS33LVDS VCC10LVDS RSDSA H18 RSDSB H19 0 J17 VSS10LVDS NC NC EA2U2503 LVDS CD2804 LVDS0OUT4M H20 LVDS0OUT4P H21 NC NC LCD PANEL CH0_TXCLKOUTCH0_TXCLKOUT+ CH0_TXOUT3CH0_TXOUT3+ GND GND VDD+5V/+3.3V LVDS0OUT3M G20 LVDS0OUT3P G21 1.6 1.6 VDD+5V/+3.3V

R2835

1K

0 R2836 5.6K

0.01 B

C2868

LVDS_CH0

D17

VSS33BIAS LVDS POWER/REF

LVDS0OUT2M F20 LVDS0OUT2P F21 LVDS0CLKOUTM G18 LVDS0CLKOUTP G19

1.6 1.6

B2804

3.3 3.3 3.3 C2879 0.1 B

HCB1608KF-221T20 B2805 10V 22 V-S C2871 10V 22 V-S HCB1608KF-221T20 C2866 0.1 B C2876

F17 E17 F18

VCC33BIAS VCC33LVDS VCC33LVDS

0 0 1.0

B2803 HCB1608KF-221T20 4V 47 V-S C2872 C2867 0.1 B

B2800 BLM18PG181SN1D

PCBDH0 CEG360

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

H-25

22LV505

H-26

SCALER POWER SCHEMATIC DIAGRAM


8

(DIGITAL PCB)

FROM/TO SCALER VIDEO/AUDIO

SCALER IC IC2801 R8J66954BG AVDDA J4 AVDDB K4 B2810 HCB1608KF-221T20 10V 22 V-S 3.36 E5 3.36 E6 3.36 E11 3.36 U5 3.36 U8 0.1 B VCCQ33 VCCQ33 VCCQ33 VCCQ33 VCCQ33 AVDDC L4 Io_Power ADVSS F5 ADVSS G5 ADVSS H4 0 1.86 1.03 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.00 1.03 1.03 E7 E9 E15 J9 J10 J11 J12 J13 K9 K13 L9 L13 M9 M13 N9 N10 N11 N12 N13 T5 U6 U9 VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD ADVSS J5 ADVSS L5 0 0 0 0 0 B2814 0.1 B C2910 C2906 HCB1608KF-121T20 1 B 3.30 3.30 3.25 4V 330 V-S C2902 0.1 B C2903 0.1 B C2904 0.1 B C2905 B2813 HCB1608KF-121T20 AD_A3.3V

C2890

C2897

C2887

B2812

0.1 B C2893

C2883

1 B

1 B

HCB1608KF-221T20 4V 100 V-S

C2882

C2898

C2894

1 B

0.1 B

PLLVDD P4 A3.3V

3.30

Core_Power

PLLVSS N5 DLLVDD T4 P5

0 3.32 C2907

B2815 0.1 B C2911 1 B HCB1608KF-121T20

A3.3V

DLLVSS

C2884

1 B C2885

C2886

1 B C2888

0.1 B C2889

1 B C2892

0.1 B C2895

1 B C2899

0.1 B

0.1 B

C2908

C2914

1 B

HCB1608KF-121T20

4V 330 V-S

0.1 B C2912

VCC33AD_A V3 VSS33AD_A W1 0 3.30 VCC33DA_A Y4 VSS33DA_A Y3 VDD33 J3 VDD33 U4 0 3.31

B2816

B2817 0.1 B C2913 C2909 1 B HCB1608KF-121T20

C2896

1 B C2900

0.1 B

B2820 10V 22 V-S HCB1608KF-121T20 TO HDMI VDD33 B2821 10V 22 V-S 0.1 B C2921 HCB1608KF-121T20 0.1 B C2920

3.36 C2917 0 0 3.30 C2918 C2923 0.1 B

B2811 HCB1608KF-221T20 10V 22 V-S C2901 C2891 0.1 B

3.32 M4 0 M5

DVDDABC DVSSABC D3.3V

VSS33 H5 VSS33 R5 VDD33ADDAV2

1.8 0 0 0 0 0 0 0 0 0 0 0 0 FROM REGULATOR

E8 E10 E12 K10 K11 K12 L10 L11 L12 M10 M11 M12 U7

VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS

VSS33ADDA U3

GND

D1.8V VSS18 K5 VSS18 R4 0 0

10V 22 V-S

1.84 VDD18 K3 1.85 VDD18 T3 C2919 0.1 B C2922 0.1 B C2924

B2822 HCB1608KF-121T20

3
D1.0V D1.8V GND D3.3V

PCBDH0 CEG360

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-27

19LV505/19LV506

H-28

SCALER POWER SCHEMATIC DIAGRAM


8

(DIGITAL PCB)

TO SCALER VIDEO/AUDIO SCALER IC IC2801 R8J66954BG AVDDA J4 AVDDB K4 B2810 HCB1608KF-221T20 3.3 E5 3.3 E6 3.3 E11 3.3 U5 3.3 U8 0.1 B VCCQ33 VCCQ33 VCCQ33 VCCQ33 VCCQ33 AVDDC L4 Io_Power ADVSS F5 ADVSS G5 ADVSS H4 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 E7 E9 E15 J9 J10 J11 J12 J13 K9 K13 L9 L13 M9 M13 N9 N10 N11 N12 N13 T5 U6 U9 VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD 0 0 0 (16-08) W915 3.3 3.3 3.3 4V 330 V-S C2902 0.1 B C2903 0.1 B C2904 0.1 B C2905 B2813 BLM18PG121SN1D AD_A3.3V

10V 22 V-S

C2890

C2897

C2887

C2883

B2812

0.1 B C2893

1 B

1 B

HCB1608KF-221T20 4V 100 V-S

0 ADVSS J5 0 ADVSS L5 3.3 C2906 0.1 B C2910 1 B

C2882

C2898

C2894

1 B

0.1 B

PLLVDD P4 A3.3V

Core_Power

PLLVSS N5 DLLVDD T4 P5

0 3.3 C2907 0.1 B C2911 1 B B2815 BLM18PG121SN1D A3.3V

DLLVSS

C2884

1 B C2885

C2886

1 B C2888

0.1 B C2889

1 B C2892

0.1 B C2895

1 B C2899

0.1 B

0.1 B

C2908

C2914

1 B

BLM18PG121SN1D

4V 330 V-S

0.1 B C2912

VCC33AD_A V3 3.3 VSS33AD_A W1 0 VCC33DA_A Y4 3.3 C2909

B2816

B2817 0.1 B C2913 1 B BLM18PG121SN1D

C2896

1 B C2900

0.1 B

VSS33DA_A Y3 VDD33 J3 VDD33 U4

0 3.3 3.3 C2917

B2820 10V 22 V-S BLM18PG121SN1D C2920

B2811 HCB1608KF-221T20 10V 22 V-S C2901 C2891 0.1 B

3.3 M4 0 M5

C2923

0.1 B

0.1 B

DVDDABC DVSSABC D3.3V

VSS33 H5 VSS33 R5 VDD33ADDAV2

0 0

TO HDMI VDD33 B2821

0 0 0 0 0 0 0 0 0 0 0 0 0 FROM REGULATOR

E8 E10 E12 K10 K11 K12 L10 L11 L12 M10 M11 M12 U7

VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS

VSS33ADDA U3

10V 22 V-S

3.3 C2918 0.1 B C2921

BLM18PG121SN1D

1.8 VDD18 K3 1.8 VDD18 T3 C2919 C2922 0.1 B 0.1 B C2924 GND D1.8V VSS18 K5 VSS18 R4 0 0 10V 22 V-S

B2822 BLM18PG121SN1D

3
D1.0V D1.8V GND D3.3V

PCBDH0 CEG360

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-29

22LV505

H-30

FLASH SCHEMATIC DIAGRAM


8

(DIGITAL PCB)
CP2803 A2001WV-12A EEP/PC_TOOL_JIG_CON CP2801 A2001WV-9A 9 8 7 6 5 4 3 2 1 NC/RESET D3.3V PC_TOOL_TX PC_TOOL_RX D_GND IIC_OFF SDA SCL GND IIC_OFF I2C_DATA I2C_CLK GND NC D3.3V PC_TOOL_TX PC_TOOL_RX TCK TRST_N TDO ASEBRKAK_N TMS TDI RESET_N FLASH_WP ASEMD0 C2807 0.1 B TCK TRST_N TDO ASEBRKAK_N TMS TDI RESET_N FLASH_WP ASEMD0 GND VDD33 GND 1 2 3 4 5 6 7 8 9 10 11 12 10K C2808 0.1 B ASEBRKAK_N R2809 TDO TDI TMS TCK TRST_N R2808 R2807 10K 10K ASEMD0 D3.3V A1 RESET_N E4 F4 B1 C2 A2 B2 C3 D3 D4 MODE0 MODE1 ASEMD0 ASEBRKAK_N TDO TDI TMS TCK TRST_N E10A DEBUG 2.78 0 3.23 3.35 3.28 3.24 3.24 3.28 3.31 RESET/MODE RESET_N 3.28 SCALER IC IC2801 R8J66954BG

10V 22 V-S

B2801 D3.3V HCB1608KF-221T20 C2802

D3.3V_FLASH

R2810 10K

USB_CS WE0_N CS0_N

3.26 3.38 3.44 3.44

A6 C6 B9 A9

WAIT_N(GPIO) WE0_N CS0_N RD_N

C2803

0.1 B

RD_N R2802 NOR FLASH IC IC2804 EN29LV320AB-70TCP A15 A14 A13 A12 A11 A10 A9 A8 A19 A20 WE# RESET# A21/NC WP#/ACC RY/BY# A18 A17 A7 A6 A5 A4 A3 A2 A1 A16 BYTE# VSS DQ15/A-1 DQ7 DQ14 DQ6 DQ13 DQ5 DQ12 DQ4 VCC DQ11 DQ3 DQ10 DQ2 DQ9 DQ1 DQ8 DQ0 OE# VSS CE# A0 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 1 10K NEAR FLASH R2811 10K A17 R2805 10K NR2802 CRA108100JV D15 D7 D14 D6 NR2803 CRA108100JV D13 D5 D12 D4 C2806 0.1 B NR2804 CRA108100JV D11 D3 D10 D2 NR2801 CRA108100JV D9 D1 D8 D0 RD_N R2806 10K CS0_N D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 A22 A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1

A16 A15 A14 A13 A12 A11 A10 A9 A20 A21 WE0_N RESET_N FLASH_WP A19 FROM/TO SCALER VIDEO/AUDIO A18 A8 A7 IIC_OFF I2C_DATA I2C_CLK TO JACK A1 A_MUTE FROM/TO MICON ASEMD0 A6 A5 A4 A3 A2

3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 NC 0 JG2801 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36

3.36 3.36 0 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 0 3.36 3.36

24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9

3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44 3.44

B6 D6 A5 D7 C7 A14 B3 A3 C4 B4 A4 D5 C5 B5 B7 A7 D8 C8 B8 A8 D9 C9

A22(GPIO) A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1

BLON

3.31

B14

(GPIO)

3.22 3.31 3.25 3.31 3.28 3.31 3.28 3.31 3.31 3.31 3.31 3.31 3.31 3.31 3.31 3.31

A13 C13 A12 C12 A11 C11 A10 C10 B13 D13 B12 D12 B11 D11 B10 D10

D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0

FLASH I/F

IIC_OFF RESET_N PC_TOOL_RX FROM/TO REGULATOR BLON AT+3.3V D3.3V GND 27MHz CLK NC C2809 100GT02728 27MHz X2801 R2812 1M 1.8K R2814 25MHz C14 A16 VCNT(GPIO) XOUT PC_TOOL_TX (HDMI_SW) A_MUTE JG2803 JG2804 JG2805 3.15 3.15 3.15 C16 D16 C17 C18 B18 M32TDI M32TDO M32TCK M32TMS M32TRST_N M32R DEBUG

JG2806 2.88 JG2802 NC

8P CH

25MHz

C2810 10P CH

B16

XIN

C2811 100GT02509 25MHz 27P CH X2802

R2813 R2815 1.8K 1M

25MHz CLK

25MHz

A15

XOUT25

PCBDH0 CEG360

25MHz

B15

XIN25

C2812

20P CH

10

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-31

19LV505/19LV506/22LV505

H-32

DDR SCHEMATIC DIAGRAM


8

(DIGITAL PCB)
DDR_SDRAM IC IC2802 HYB18TC256160BF-3S R2823 R2824 DAA0 DAA1 DAA2 DAA3 DAA4 DAA5 DAA6 DAA7 DAA8 DAA9 DAA10 DAA11 DAA12 1.83 1.84 1.88 3.30 1.88 0.91 1.86 1.34 1.95 1.85 1.92 1.95 1.31 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 1.81 3.08 0 3.06 3.08 1.8 3.08 1.8 3.34 3.35 3.44 3.28 0.98 3.34 3.23 3.44 DAQ0 DAQ1 DAQ2 DAQ3 DAQ4 DAQ5 DAQ6 DAQ7 DAQ8 DAQ9 DAQ10 DAQ11 DAQ12 DAQ13 DAQ14 DAQ15 DACLK R2820 R2817 160 DACLK DAQM0 DAQM1 DACLK_N DADQS0 DADQS1 0 1.86 NC 0 NC 0 1.80 1.73 NC0 NC0 DADQS0_N DADQS1_N 1.80 1.60 NC 0 0 NC P21 L21 AA14 AA11 N18 K18 V13 V10 N19 K19 W13 W10 SDDM0 SDDM1 SDDM2 SDDM3 SDDQS0 SDDQS1 SDDQS2 SDDQS3 SDDQS0_N SDDQS1_N SDDQS2_N SDDQS3_N SCALER IC DACLK DACLK_N R2825 R2826 5.1 5.1 1.51 1.51 IC2801 R8J66954BG 1.98 27 27 DARAS_N DACKE

NR2805 CRA108270JV DABA1 DAODT DAA4 DAA12 NR2806 CRA108270JV DAA8 DAA6 DAA0 DACS_N NR2807 CRA108270JV DAA2 DAWE_N DABA0 DAA10 NR2808 CRA108270JV DAA1 DAA9 DAA3 DAA7

W20 W21

SDCLK SDCLK_N

SDODT

V18

SDBA0 AA19 1.87 1.52 1.52 DACAS_N R2827 27 1.52 1.89 Y20 V21 V19 Y21 Y19 SDCKE SDCS_N SDRAS_N SDCAS_N SDWE_N SDA0 SDA1 SDA2 SDA3 SDA4 SDA5 SDA6 SDA7 SDA8 SDA9 SDA10 SDA11 SDA12 U20 AA18 AA20 AA17 U18 V16 U21 Y16 T20 Y17 Y18 W16 T18 SDBA1 V17

1.34 1.98

DQ13 D9 DQ14 B1 DQ15 B9

2.05 1.91 1.29 1.88 1.97 1.84 2.05 2.1 1.97 2.09 1.98 1.7 1.87

DADQS0 DADQS1 DAQM0 DAQM1

1.8 3.34

F7

LDQS

DADQS0_N 1.8

E8 LDQS B7 UDQS UDQS LDM UDM CKE WE BA0 BA1

CK CK CS RAS CAS ODT

J8 K8 L8 K7 L7 K9

1.06 1.07 1.93 0 0 1.08

160

DACLK_N DACS_N DARAS_N DACAS_N DAODT

DADQS1_N 3.34 A8 3.29 F3 3.34 B3 3.24 DACKE K2 1.84 DAWE_N K3 0 DABA0 L2 1.34 DABA1 L3

NR2809 CRA108270JV DAA11 DAA5 NC NC NC NC

5
3.44 A3 3.04 E3 3.31 J3 2.02 N1 0 P9 3.44 A7 3.24 3.44 1.01 3.44 1.03 3.08 0 3.08 0 0 B B B B B B B B VSS VSS VSS VSS VSS VSSQ VDD A1 VDD E1 VDD J9 VDD M9 VDD R1 VDDQ A9 VDDQ C1 VDDQ C3 VDDQ C7 VDDQ C9 VDDQ E9 VDDQ G1 VDDQ G3 VDDQ G7 VDDQ G9 VDDLJ1 VREF J2 3.28 0 1.86 1.86 1.86 3.44 0.98 3.24 3.34 3.34 1.03 1.86 1.86 1.86 1.86 1.86 0.93 DAQ3 DAQ1 DAQ4 DAQ5 DAQ0 DAQ2 0.1 B 0.1 B 0.1 B B 1 B 1 B DAQ7 DAQ6 0.1 B DAQ12 DAQ8 DAQ14 C2831 DAQ10 DAQ13 DAQ11 0.1 B 0.1 B 0.1 B B B 0.1 B B B 0.1 B DAQ15 DAQ9 NC NC NC NC NC NC NC NC NC NC R8 R7 NC6 NC5 0.1 0 0 0 1.8 1.81 0 1.8 1.8 1.8 1.8 1.8 1.8 0 1.3 0 0 1.8 1.8 1.8 1.8 1.8 0.1 0.1 0.1 0.1 0.1 R20 R21 T21 R18 P18 R19 N20 P20 M20 L18 L20 M18 L19 N21 K21 M21 Y14 W15 V14 V15 AA16 Y15 AA15 Y13 V11 W11 Y11 V12 AA13 AA12 Y12 AA10 SDDQ0 SDDQ1 SDDQ2 SDDQ3 SDDQ4 SDDQ5 SDDQ6 SDDQ7 SDDQ8 SDDQ9 SDDQ10 SDDQ11 SDDQ12 SDDQ13 SDDQ14 SDDQ15 SDDQ16 SDDQ17 SDDQ18 SDDQ19 SDDQ20 SDDQ21 SDDQ22 SDDQ23 SDDQ24 SDDQ25 SDDQ26 SDDQ27 SDDQ28 SDDQ29 SDDQ30 SDDQ31 B B

C2861

C2841

C2842

C2846

C2849

C2853

C2855

C2856

C2857

C2858

FROM/TO REGULATOR GND D1.8V

B2 VSSQ B8 VSSQ D2 VSSQ D8 VSSQ E7 F2 VSSQ VSSQ F8 VSSQ H2 VSSQ H8 VSSQ J7 VSSDL

VCCQ18 K20 VSS VSS VSS K17 L17

1.81 0 0 0 1.81 C2843 C2847 C2848 C2852 1.85 1.81 0 0 1.81 1.81 0 0 1.81 C2854 B B B B 0.1 0.1 0.1 0.1 0.1 B

C2813

C2815

C2817

C2819

C2823

C2825

M19 VCCQ18 M17 SDVREF0 N17 VCCCQ18 P19 VSS VSS P17 R17

C2814

C2816

C2818

C2820

C2824

C2826

C2836

C2838

C2840

VCCQ18 T19 VCCQ18 T17 VSS VSS U19 U17

VCCQ18 V20

1K +-1%

C2844

C2850

R2828

0.1 B

E2

NC2

D1.8V 1K +-1% C2821 R2818

A2 NC1 0.1 B

0.1 B

R3 NC4 L1 NC3

1K +-1%

NC 1.8 NC 1.8 NC 1.8 NC 1.8 NC 1.8 NC 1.8 NC 1.8 NC 1.8 NC 1.8 NC 1.8 NC 1.8 NC

VCCQ18 W19 1.81 VCCQ18 W18 1.81 0 VSS W17 0 AA21 VSS 0 VSS U16 0 VSS U15 VCCQ18 U14 1.81 0 VSS W14 1.85 SDVREF1 U13 1.81 VCCQ18 W12 0 VSS U12 0 VSS U11 0 VSS Y10 VCCQ18 U10 1.81

C2859 1B 6.3V(2125) C2860 10V 22 V-S

C2822

R2819

0.1 B

1K +-1%

C2845

C2851

0.1 B

0.1 B

R2829

PCBDH0 CEG360

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-33

19LV505/19LV506/22LV505

H-34

JACK SCHEMATIC DIAGRAM


8

(DIGITAL PCB)

DVD-H DIGITAL AUDIO SW IC IC6556 SN74LVC1G3157DCKR 1 6 C6554 DVD_SPDIF HDMI AUDIO IN J4302 PJ-364H 5 L 4 2 B4304 R 3 6 7 1 NC NC FCM1608KF-151T06 R4317 22P CH R4318 56K C4312 C4314 1K 22P CH NC NC B4303 FCM1608KF-151T06 R4316 1K R4319 56K R6551 100 11 2 DVI_A_IN_L SPDIF 12 R6552 100 DVI_A_IN_R 5 0 2.9 GND B1 VCC A 3.3 3.3 SPDIF_OUT 2.9 B2 SW 3.3

B6551 HCB1608KF-121T20

4.7 B 6.3V(2125)

FROM/TO REGULATOR

7
GND D3.3V FILTER_MUTE DVD_SPDIF D5.0V ZERO_MUTE

D5.0V

B4301 10V100 V-S FCM1608KF-151T06 C4302 R4302

D AUDIO DRIVER Q4301 KTC3875S_Y_RTK R4309 5.0 1.5K 3.2 2.8 68

COAXIAL J4301 RCA-101HT(OR) C4304 0.1 B B4302 FCM1608CF-600T06 H E

AT+5.8V

TO AV SWITCH

100P CH

C4301 0.1 B FROM/TO JACKOUT FROM/TO CP4301 TWG-P23P-A1 LOUT 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 GND ROUT GND AV1_C GND AV1_Y GND YUV L IN GND YUV R IN GND CVBS1 GND AV1 L IN GND AV1 R IN GND AV3_V GND AV3_U GND AV3_Y 82P CH C4320 82P CH C4323 82P CH C4317 82P CH C4318 82P CH C4313 82P CH AV3/AV4_Y AV3/AV4_PB AV3/AV4_PR AV1_A_IN_R AV1_A_IN_L ROUT_SOUND MUTE SW Q3410 KTC3875S_Y_RTK 4.5 R3427 0 0 1K (2125) C3413 AV1_CVBS YUV_A_IN_R YUV_A_IN_L LOUT_SOUND MUTE SW Q3411 KTC3875S_Y_RTK 0 0 0 R3428 1K 5.0 MUTE_SW Q3409 KRA101SRTK 0 5.0 R3421 1.5K AV1_Y AV1_C 0 MUTE_SW Q3404 KTC3875S_Y_RTK 5.0 FILTER_MUTE

R4301 2.2K

AV1_Y AV1_C DVI_A_IN_L DVI_A_IN_R DVD-H

R4307

R4310

0.022 B R4306

C4303

3.3K

C4306

220

100K

R3431 470 MUTE SW Q3407 KRC102SRTK 2.7 0

D3402 MA111 D3403 MA111 R3412 4.7K R3413 4.7K 0 0 R3405 4.7K 0

D3401 MA111

DVD-H

YUV_A_IN_L YUV_A_IN_R AV1_A_IN_L

MUTE_SW Q3402 KRA101SRTK 3.3 3.3 ZERO_MUTE AT+5.8V

AV1_A_IN_R

FROM/TO SCALER VIDEO/AUDIO PC_V PC_H AV1_CVBS VGA-R VGA-G

W840

A_MUTE AUDIO_MUTE

7 6 5 4 3 2 1

4.7 B

VGA-B AV3/AV4_Y AV3/AV4_PB AV3/AV4_PR SPDIF DVD-H LOUT_FI ROUT_FI FROM FLASH A_MUTE

8.2K

8.2K R4330

R4329

C4319

ROUT_SOUND LOUT_SOUND R3433 1K WD-00021-R VGA-R VGA-G VGA-B NC DGND 75 AGND AGND AGND NC DGND NC DDCD VGAHS VGAVS DDCC NC 2.2K NC NC R4344 R4340 2.2K R4334 R4332 3.3K 3.3K W871 PC_V NC 75 75 W846 NC W844 W842 R4303 100 R4304 100 R4305 100 R4347 R4346 R4343 VGA-R VGA-G VGA-B R3434 1K D-SUB CP4303 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

FROM MICON AUDIO_MUTE

LOUT_FI ROUT_FI

W867

PC_H

PCBDH0 CEG360

CAUTION: DIGITAL TRANSISTOR

CAUTION: DIGITAL TRANSISTOR

1
NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

H-35

19LV505/19LV506

H-36

JACK SCHEMATIC DIAGRAM


8

(DIGITAL PCB)
FROM REGULATOR DVD-H DIGITAL AUDIO SW IC IC6556 SN74LVC1G3157DCKR 1 6 DVD_SPDIF HDMI AUDIO IN J4302 PJ-364H 5 L 4 2 B4304 R 3 6 7 1 COAXIAL J4301 RCA-101HT(OR) C4304 0.1 B B4302 FCM1608CF-600T06 FROM/TO SCALER VIDEO/AUDIO 100P CH R4307 R4310 C4306 100K PC_V PC_H AV1_CVBS VGA-R VGA-G VGA-B AV3/AV4_Y AV3/AV4_PB AV3/AV4_PR SPDIF DVD-H LOUT_FI ROUT_FI FROM FLASH A_MUTE ZERO_MUTE AT+5.8V R3421 1.5K ROUT_SOUND MUTE SW Q3410 KTC3875S_Y_RTK 4.5 R3427 0 0 AV3/AV4_PB AV3/AV4_Y C4319 82P CH C4320 82P CH C4323 82P CH C4317 82P CH C4318 82P CH C4313 82P CH 1K (2125) C3413 4.7 B W840 A_MUTE FROM MICON AUDIO_MUTE 220 H 2 1 E NC NC FCM1608KF-151T06 R4317 22P CH 22P CH R4318 56K C4312 C4314 1K NC NC B4303 FCM1608KF-151T06 R4316 1K R4319 56K R6551 100 11 2 DVI_A_IN_L SPDIF 12 R6552 100 DVI_A_IN_R C6554 5 0 2.9 GND B1 VCC A 3.3 3.3 SPDIF_OUT 4.7 B 6.3V(2125) TO AV SWITCH AV1_Y AV1_C DVD-H DVI_A_IN_L DVI_A_IN_R AV1_A_IN_L AV1_A_IN_R YUV_A_IN_L YUV_A_IN_R B6551 BLM18PG121SN1D 4 D3.3V 2.9 B2 SW 3.3 GND FILTER_MUTE DVD_SPDIF D5.0V ZERO_MUTE AT+5.8V

D5.0V

B4301 10V 100 V-S FCM1608KF-151T06 C4302 R4302

D AUDIO DRIVER Q4301 KTC3875S_Y_RTK R4309 5.0 1.5K 3.2 2.8 68

C4301 0.1 B

R4301 2.2K

0.022 B R4306

C4303

FROM/TO JACK OUT (CP8101) CP4301 TWG-P23P-A1 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 LOUT GND ROUT GND AV1_C GND AV1_Y GND YUV L IN GND YUV R IN GND CVBS1 GND AV1 L IN GND AV1 R IN GND AV3_V GND AV3_U GND AV3_Y AV3/AV4_PR AV1_A_IN_R AV1_A_IN_L AV1_CVBS YUV_A_IN_R YUV_A_IN_L LOUT_SOUND MUTE SW Q3411 KTC3875S_Y_RTK 0 0 0 R3428 1K 5.0 MUTE_SW Q3409 KRA101SRTK 0 5.0 AV1_Y AV1_C 0 FILTER_MUTE R3431 470 MUTE SW Q3407 KRC102SRTK 12.5 0 D3402 MA111 D3403 MA111

3.3K

D3401 MA111 MUTE_SW Q3402 KRA101SRTK 0 3.3 3.3

DVD-H

R3412 R3413 MUTE_SW 5.0 Q3404 KTC3875S_Y_RTK 0 4.7K 0 4.7K

R3405 4.7K

7 6 5 4 3 2 1

4
AUDIO_MUTE

8.2K

R4329

R4330

8.2K

ROUT_SOUND LOUT_SOUND R3433 R3434 WD-00021-R VGA-R VGA-G VGA-B NC DGND 75 AGND AGND AGND NC DGND NC DDCD VGAHS VGAVS DDCC NC 2.2K NC NC R4344 R4340 2.2K R4334 R4332 3.3K 3.3K W871 W867 PC_H PCBDH0 CEG360 NC 75 75 W846 NC W844 W842 R4303 100 R4304 100 R4305 100 R4347 R4346 R4343 VGA-R VGA-G VGA-B 1K D-SUB CP4303 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1K LOUT_FI ROUT_FI

PC_V

CAUTION: DIGITAL TRANSISTOR

CAUTION: DIGITAL TRANSISTOR

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

1
NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-37

22LV505

H-38

AV SWITCH SCHEMATIC DIAGRAM


8

(DIGITAL PCB)

SW+12V

16V 10 V-S

R6581

C6564

Lch SW IC IC6552 NJM2534V 8 1 0 4.0 4.3 3.3 4.8 3.2 C6567 1 B 16V(1608) R6578 10K 8 C6570 1 B 16V(1608) R6579 100 DVD-H 0 SW_L 11.82 5.45 1 B 16V(1608) C6551 0

R6584

56K

L6561 22uHNLCV32T

4.3 3.3 4.6 C6579 1 B 3.2 16V(1608)

C6581 1 B 16V(1608)

56K

Lch SW IC IC6557 NJM2534V

FROM/TO SCALER VIDEO/AUDIO R6589 100 ASW2 R6586 100 ASW1 ASW0 SW_Y_IN SW_C_IN DVI_A_IN_L ASW1 ASW2 DVD-H YUV_A_IN_L SDOUT BCLK AV1_A_IN_L LRCK

BUFFER

BUFFER

ASW0 TU_AUDIO_L

R6558 3.3K R6559 3.3K

AUDIO_L

R6562 2.7K R6561 2.7K

13 5 4.9 C6563 1 B 16V(1608) 14

BAIAS 4

BAIAS 5 4

9.3

MCLK

R6583

R6585

AUDIO_R

D3.3V DVD_L C6553 1 B 16V(1608) R6555 100

C6565 AUDIO_ADC IC IC6551 AK5358A C6562 1 B 16V(1608) C6561 1 B 16V(1608) R6560 4.7K C6557 2.2 B (1608) AGND VA VD DGND SCLK MCLK LRCK SDTO 12 5 0 C6555 C6556 10 C (2125) 0.1 B 4.98 3.32 0 1.62 1.47 R6569 100 1.64 1.22 2 3 OUT 12.288MHz X6551 100DT01217 NC 1 5 6.5 AINR CKS0 CKS2 DIF PDN 16 1 2.47 2.47 4.97 2.47 0 0 3.31 R6563 4.7K 3.3 R6566 4.7K R6567 4.7K 7 14 1 B 16V(1608)

R6573 100

Rch SW IC IC6553 NJM2534V 8 1 0 8.2 12.0 6.5 3.3 8.7 0 C6583 1 B 16V(1608) C6571 1B 16V(1608) R6580 100 0 SW_R 11.82 5.45 0

Rch SW IC IC6558 NJM2534V 8 1 6.17 0 4.8 3.2 C6580 R6590 1 B 16V(1608) C6568 1 B 16V(1608) R6587 100 AV1_A_IN_R FROM TUNER TU_AUDIO_L R6588 100 56K FROM JACK YUV_A_IN_R TU_AUDIO_R

AINL CKS1 VCOM

15

10K

10K

BUFFER

BUFFER

13

TU_AUDIO_R

BAIAS 4

BAIAS 5 4 C6584 1 B 16V(1608)

11

C6566 1 B 16V(1608)

R6572 100

DVD_R

R6556 R6582 100 56K

DVI_A_IN_R

DVD-H AV1_Y AV1_C AV1_A_IN_L

10

C6559 C6560

10 C (2125) FCM1608KF-102T02 FCM1608KF-102T02 0.1 B

SW_Y_IN 4 VCC 0/3.3 FCM1608KF-102T02 4.5 5.0 Y SW IC IC6554 MM1501XNRE


L BUFFER

AV1_A_IN_R DVI_A_IN_L

B6552

B6553

4.5 0 4.5

C6574 10 C 2125 C6575 10 C 2125

AV1_Y

DVI_A_IN_R YUV_A_IN_L YUV_A_IN_R

RESET_N NR6551 CRA108470JV MCLK SDOUT LRCK BCLK

B6554

VCC

DVD_Y

DVD-H D5.0V B6556 HCB1608KF-181T20 C6569 B

FROM MICON

RESET_N SW_C_IN C SW IC IC6555 MM1501XNRE


L

FROM REGULATOR C6577 10 C 2125 C6576 10 C 2125 AV1_C DVD_Y DVD_C

VCC

5.0

4.5

BUFFER

0/3.3

4.5 0 4.5

DVD_C

DVD_L DVD_R SW+12V GND D3.3V D5.0V

PCBDH0 CEG360

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-39

19LV505/19LV506

H-40

AV SWITCH SCHEMATIC DIAGRAM


8

(DIGITAL PCB)

SW+12V

R6581

16V 10 V-S

C6564

Lch SW IC IC6552 NJM2534V 8 1 0 4.0 4.3 3.3 4.8 3.2 C6567 1B 16V(1608) R6578 10K 8 C6570 1 B 16V(1608) R6579 100 DVD-H 0 SW_L 6.5 12.0 1 B 16V(1608) C6551 6.5

R6584

56K

56K

Lch SW IC IC6557 NJM2534V 1 6.5 3.3 6.6 3.3

FROM/TO SCALER VIDEO/AUDIO R6589 100 ASW2 R6586 100 ASW1 YUV_A_IN_L AV1_A_IN_L LRCK SDOUT BCLK MCLK ASW0 SW_Y_IN SW_C_IN ASW1 ASW2 DVD-H DVI_A_IN_L R6585 10K

L6561 22uHNLCV32T

C6581 1 B 16V(1608) C6579 1B 16V(1608) R6583 10K

BUFFER

BUFFER

ASW0 TU_AUDIO_L

R6558 3.3K R6559 3.3K

AUDIO_L

R6562 2.7K

13 5 4.9 C6563 R6561 2.7K 14 1 B 16V(1608)

BAIAS 4

BAIAS 5 4

AUDIO_R

D3.3V DVD_L C6553 1B 16V(1608) R6555 100

16V(1608) C6565 1 B

R6573 100

AUDIO_ADC IC IC6551 AK5358A C6562 C6561 1B 16V(1608) AINR CKS0 CKS2 DIF PDN SCLK MCLK LRCK SDTO 16 1 3.8 3.8 5.0 R6560 4.7K 2.5 0 C6555 C6556 (2125) 10 C 0.1 B 5.0 3.3 0 0 0 3.3 R6563 4.7K 3.3 3.3 1.2 R6569 100 3.3 3.3 12.288MHz X6551 100DT01217 NC 2 1 4 VCC FCM1608KF-102T02 R6566 4.7K R6567 4.7K 7 14

Rch SW IC IC6553 NJM2534V 8 1 0 4.0 9.3 4.9 C6571


BUFFER

Rch SW IC IC6558 NJM2534V 8 1 0 SW_R 6.5 12.0 6.5 6.5 3.3 6.6 3.3 C6568 1B 16V(1608) C6580 R6590 1B 16V(1608) R6587 100 AV1_A_IN_R

9.3

FROM TUNER TU_AUDIO_L TU_AUDIO_R

CKS1 VCOM AGND VA VD DGND

1B 16V(1608)

AINL

15

1B 16V(1608) C6583 1 B 16V(1608) R6580 100

BUFFER

13

C6557

2.2 B(1608)

4.8 3.2

TU_AUDIO_R

R6588 100 56K

BAIAS 5 12 5 4

BAIAS 5 4

YUV_A_IN_R

FROM JACK DVI_A_IN_R DVD-H AV1_Y AV1_C AV1_A_IN_L AV1_A_IN_R SW_Y_IN DVI_A_IN_L DVI_A_IN_R YUV_A_IN_L

11

C6566 1 B 16V(1608)

R6572 100

DVD_R

C6584 1B 16V(1608)

R6556 R6582 100 56K

10

C6559 C6560

10 C (2125) 0.1 B FCM1608KF-102T02 FCM1608KF-102T02

3 OUT

Y SW IC IC6554 MM1501XNRE
L

B6552

B6553

0/3.3 4.5 5.0

4.5 0 4.5

C6574 10 C 2125 C6575 10 C 2125

AV1_Y

YUV_A_IN_R

BUFFER

B6554

VCC

NR6551 CRA108470JV MCLK SDOUT LRCK BCLK

RESET_N

DVD_Y

DVD-H D5.0V B6556 BLM18PG181SN1D C6569 1 B FROM MICON RESET_N SW_C_IN C SW IC IC6555 MM1501XNRE
L

0/3.3 4.5 5.0

4.5 0 4.5

C6577 10 C 2125 C6576 10 C 2125

AV1_C FROM REGULATOR DVD_Y

BUFFER

VCC

DVD_C

DVD_C DVD_L DVD_R SW+12V GND D3.3V D5.0V

PCBDH0 CEG360

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-41

22LV505

H-42

H
TO HDMI D3.3V GND D5.0V FROM/TO SCALER VIDEO/AUDIO S1_DET

REGULATOR SCHEMATIC DIAGRAM


8

(DIGITAL PCB)
IC VCC1.0V DC/DC R3016 NC NC POWER_FAIL BLON VDIM REG_SW LV_CTL R3005 1K R3008 10K AT+5.8V D3005 EC11FS4 D3007 EC11FS4 L3001 1.8K +-1% 22uH TSL0808 C3056 VDD CORE 1.05V IC IC3001 BD9130NV 1 8 0.8 3.3 0.3 0 4.7K +-1% ADJ VCC ITH GND EN PVCC SW PGND 3.0 3.3 1.0 0 C3024 5.2uHCDRH104R 22 B 6.3V(2125) C3031 10 C 10V(2125) C3026 10 C 10V(2125) 10 C 10V(2125) C3029 C3027 22 B 6.3V(2125) L3002 (typ 1.8A) B3003 HCB1608KF-181T20 D1.0V 150 +-1% R3018

FROM/TO POWER CP3001 (CP501) TWG-P23P-A1 23 22 21 20 KEY-A KEY-B POWER_FAIL INVERTER_H LIGHT_CTL POWER_ON-H GND GND B GND GND GND P.CON+3.8V P.CON+3.8V AT+5.8V AT+5.8V AT+5.8V AT+12V AT+12V P.CON+31V POP_MUTE FILTER_MUTE S_DET NC W861 W812 HCB1608KF-181T20 B3010 HCB1608KF-181T20 B3009 HCB1608KF-181T20 FILTER_MUTE S1_DET NC NC HCB1608KF-181T20 B3012 AT+5.8V 3.0 AT+12V TUNER+30V LCD-H 0 0 LCD+B_SW Q3005 KRC102SRTK 0.33 B C3002 B3011 R3002 6.8K C3003 1 B 2.7 3 5.9 2 LCD+B_SW Q3009 RTQ035P02 4 5.9 C3004 1 B 5.9 5 5.9 IN 4 5.8 AT+5.8V AT+5.8V 4.7 B 6 for LCD PANEL B3008 HCB1608KF-181T20 5.9 1 D3002 EC31QS04 D3006 EC31QS04 R3037 1K NC 3 NC VDD_PANEL GND C3015 0.1

AT+3.3V VDIM GND D3.3V TWIRE_TXDC TWIRE_RXDC LCD-H TO TUNER TUNER+30V D3.3V D5.0V TO FLASH GND D3.3V BLON AT+3.3V

1 B

19 18 16 15 14 13 12 11 10 9 8

7 6 5 4 3 2 1

680P CH R3009

C3016

17 DTV_POWER_ON-H NC

0 2 GND 1

5.8

GND TO LVDS 3.3V REGULATOR IC IC3009 S-1170B33UC-OTSTFG D3.3V D1.0V VDD_PANEL GND AT+3.3V FROM/TO MICON LV_CTL SYS_POWER_H 3.3V_POWER_H AT+3.3V

R3010

8.2K

SW

OUT 5 3.3

4.7 B

C3054

C3055

5.0V REGULATOR IC IC3007 BD7820FP

GND

OUT

IN

ADJ

CTL

STBY-H IR_REMO 0.75 POWER_FAIL DVD_RESET B3014 R3033 470 +-1% HCB1608KF-181T20 AT+12V AT+5.8V R3034 220 +-1% 0 R3041 22K 0 R3045 4.7K R3042 0 SW+12V SW Q3007 KTA1664-Y(GP) 4.7K 22uH TSL0808 C3013 6.3V 68 CD L3005 R3022 R3020 0.047 0.047 1/4W 2125 1/4W 2125 for CORE 3.3 3.3 4 S VDD CORE 1.8V IC IC3002 AL1015 C3014 0.1 B 1 8 13.9 4.5 1.2 R3019 27P CH 1.3 C3011 33K C3017 B B VIN V5/PWON Vref/SS CC CS EXT GND FB 13.9 13.1 0 1.3 1K +-1% R3023 R3024 1.5K +-1% R3025 EC31QS04 D3004 220 +-1% 5 D 5.8 6 D HCB1608KF-181T20 B3005 DC DC FET Q3011 TPC6108 B3004

(CP8501,CP8502) TO DVD PCB CD3002 E82M1101 REG_SW R3031 10K

1 2.2

2 5.9

6 0

4 5.0 R3032 3.9K +-1%

D5.0V

VCC+3.3V DC/DC L3004 22uHCDRH104R

START_SW AT+5.8V D5.0V HCB1608KF-181T20 GND TO SCALER POWER GND D3.3V 0.001 B B3006 HCB1608KF-181T20 D3.3V 82 CD B3007 HCB1608KF-181T20 TO AV SWITCH DVD_R DVD_L B3017 DVD+3.3V HCB1608KF-181T20 DVD_Y DVD_C SW+12V D5.0V D3.3V D1.8V D1.0V

C3038

1 B

FROM/TO DVD

W832

CP3002 (CP8501,CP8502) A2006WV0-2X11P 1 2 3 4 5 6 7 8 9 10 11 SPDIF-134 ZERO GND DVD_RESET GND START_SW TX GND P.CON+3.3V GND P.CON+6V GND B3022 FCM1608KF-102T02

C3039

10 B 2125

W847 W849 W852 W853

DVD_SPDIF ZERO_MUTE DVD_RESET START_SW TWIRE_TXDC DVD+3.3V

R3014

C3019 0.1 B

3.3K SW Q3004 KRC103SRTK

2.8 SW Q3008 KRC102SRTK 0

C3021

3 2 1 3.3 2.4 3.3

0.1

B3015 2.7 3 2 LCD+B_SW 8.2K Q3010 RTQ035P02 4 5 5.9 C3042 B 5.9 6 5.9 5.9 1 6.3V 220 V-S C3043 5.9 HCB1608KF-181T20

4V

(1608) W850 W851 W856 W857 B3023 FCM1608KF-102T02 B3016 FCM1608KF-102T02

MOTOR+6V DVD_R DVD_L DVD_Y DVD_C TWIRE_RXDC SW+12V MOTOR_GND 0 0 2.8

R3035 6.8K

3.3V_POWER_H

R3043 1K 0 SW 0 Q3003 KRC103SRTK 3.0

4.5 0

0.47

C3012

C3022

12

13 DVD_A_OUT_R 14 DVD_A_OUT_L 15 16 17 18 19 20 21 22 [V]Y_VIDEO [U]C_VIDEO GND RX P.CON+3.3V P.CON+12V P.CON+A5V GND(M) 10P CH 10P CH

0.33 B C3041

LCD+B_SW Q3006 KRC102SRTK

C3040

1 B R3040

IC

L3003 22uH TSL0808

(DDR2:typ 1095mA) 6.3V 330 V-S

D1.8V

TO DDR D1.8V GND TO JACK D3.3V ZERO_MUTE

B3013 HCB1608KF-181T20 75 75

1.8V_REGULATOR IC IC3003 V_IN PQ035ZN1HZPH AT+5.8V 5.0 5.9 5.9 R3003 2.2K 0 3.2 R3004 D3.3V REG_SW D3003 EC31QS04 R3007 16V 10 V-S 100 C3047 4.7K 1 3.3

VB 2

V_OUT V_ADJ GND 6 1.8 1.3 4 0 5

REG SW Q3002 KRA101SRTK AT+5.8V

C3048

C3065 C3066

R3039

R3038

R3015 6.8K +-1% 3.3K

R3017 150 +-1%

D5.0V DVD_SPDIF FILTER_MUTE AT+5.8V GND

C3023

REG SW Q3001 KRC102SRTK

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. :SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY ARE

2.2 B R3013

C3018

2.2 B

SYS_POWER_H

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

CAUTION: DIGITAL TRANSISTOR

CAUTION: DIGITAL TRANSISTOR


PCBDH0 CEG360

H-43

19LV505/19LV506

H-44

REGULATOR SCHEMATIC DIAGRAM


8

(DIGITAL PCB)
IC VCC1.0V DC/DC R3016 NC NC POWER_FAIL BLON VDIM REG_SW LV_CTL R3005 1K R3008 680P CH 10K R3009 AT+5.8V D3005 EC11FS4 D3007 EC11FS4 L3001 1.8K +-1% 22uH TSL0808 C3056 VDD CORE 1.05V IC IC3001 BD9130NV 1 8 0.8 3.3 0.3 0 4.7K +-1% ADJ VCC ITH GND EN PVCC SW PGND 3.0 3.3 1.0 0 C3024 5.2uHCDRH104R 22 B 6.3V(2125) C3031 22 B 6.3V(2125) 10 C 10V(2125) C3026 10 C 10V(2125) C3027 10 C 10V(2125) C3029 L3002 B3003 BLM18PG181SN1D S1_DET AT+3.3V VDIM D3.3V TWIRE_TXDC TWIRE_RXDC LCD-H GND TO TUNER R3037 S-1170B33UC-OTSTFG 1K NC 3 NC 2 GND 0 1 SW 5.8 3.3V REGULATOR IC IC3009 TUNER+30V D3.3V D5.0V GND (typ 1.8A) D1.0V FROM/TO SCALER VIDEO/AUDIO 150 +-1% TO HDMI D3.3V D5.0V GND R3018

FROM/TO POWER CP3001 (CP501) TWG-P23P-A1 23 22 21 20 KEY-A KEY-B POWER_FAIL INVERTER_H LIGHT_CTL POWER_ON-H GND GND GND GND P.CON+3.8V P.CON+3.8V AT+5.8V AT+5.8V AT+5.8V AT+12V AT+12V P.CON+31V POP_MUTE FILTER_MUTE S_DET NC W861 W812 NC NC B3011 BLM18PG181SN1D B3012 BLM18PG181SN1D B3010 BLM18PG181SN1D B3009 BLM18PG181SN1D FILTER_MUTE S1_DET R3002 6.8K C3003 1 B AT+5.8V AT+12V TUNER+30V 0 LCD-H 3.0 0 0.33 B C3002 LCD+B_SW Q3005 KRC102SRTK 0 3 G 5.2 2 D 5.2 1 D for LCD PANEL B3008 BLM18PG181SN1D D3002 EC31QS04 D3006 EC31QS04 VDD_PANEL GND C3015 0.1 B GND

1 B

19 18 16 15 14 13 12 11 10 9 8

C3016

17 DTV_POWER_ON-H NC

GND

7 6 5 4 3 2 1

R3010

8.2K

LCD+B_SW Q3009 RTQ035P02 S D D 4 5.8 5 5.2 6 5.2

TO FLASH D3.3V BLON GND TO LVDS D3.3V D1.0V VDD_PANEL GND FROM/TO MICON LV_CTL SYS_POWER_H 3.3V_POWER_H AT+3.3V IR_REMO POWER_FAIL DVD_RESET START_SW AT+5.8V D5.0V GND

C3004

1 B

IN 4 5.8 AT+5.8V AT+5.8V C3054 4.7 B

OUT 5 3.3

AT+3.3V C3055 4.7 B

5.0V REGULATOR IC IC3007 BD7820FP

GND

OUT 0 4 5.0

1 R3031 10K

IN

5.8

5.8

ADJ 5 0.8

CTL

W832

REG_SW

R3032 3.9K +-1% 2125 R3034 R3033 470 +-1% VCC+3.3V DC/DC B3014 BLM18PG181SN1D 12.0 220 +-1% R3041 22K 0 R3042 12.0 D5.0V AT+12V SW+12V L3005 AT+5.8V 22uH TSL0808 C3013 R3014 3.3K 6.3V 68 CD R3022 0.047 1/4W 2125 R3020 0.047 1/4W 2125 VDD CORE 1.8V IC IC3002 AL1015 C3014 0.1 B 1 8 5.8 4.5 1.2 27P CH 1.2 R3019 33K C3017 B C3012 VIN V5/PWON Vref/SS CC CS EXT GND FB 5.8 1.2 0 1.3 R3023 1K +-1% R3024 1.5K +-1% R3025 EC31QS04 D3004 C3022 220 +-1% 4V 82 CD C3019 0.1 B 6.2 G 3 3.3 D 2 3.3 D 1 for CORE 5.8 4 S 3.3 5 D 3.3 B3004 D DC DC FET Q3011 TPC6108 6 BLM18PG181SN1D B3005 L3004 22uHCDRH104R BLM18PG181SN1D

C3038

C3039 10 B

1 B

FROM/TO AUDIO/VIDEO

CP3002 A2006WV0-2X11P 1 SPDIF-134 2 3 4 5 6 7 8 9 10 11 ZERO GND DVD_RESET GND START_SW TX GND P.CON+3.3V GND P.CON+6V GND

W847 W849 W852 W853 B3022 FCM1608KF-102T02

DVD_SPDIF ZERO_MUTE

SW Q3007 KTA1664-Y(GP) 4.7K

4
TO SCALER POWER D3.3V D1.8V D1.0V GND

R3045

DVD_RESET START_SW TWIRE_TXDC DVD+3.3V MOTOR+6V R3035

4.7K

0.001 B

2.8

C3021

SW Q3008 KRC102SRTK

SW Q3004 KRC103SRTK 4.5 0 0 0 3.3 6.3V 220 V-S SW Q3003 0 KRC103SRTK C3011 0.1 B

B3006 BLM18PG181SN1D D3.3V BLM18PG181SN1D B3007

TO AV SWITCH DVD_R DVD_L DVD_Y DVD_C SW+12V D5.0V D3.3V GND TO DDR D1.8V GND TO JACK

3.3V_POWER_H B3015 0 3 0.33 B C3041 C3040 1 B R3040 0 2.8 0 LCD+B_SW Q3006 KRC102SRTK G 8.2K 2 5.2 1 C3043 5.2 BLM18PG181SN1D 6.8K

R3043 1K

0.47

12

13 DVD_A_OUT_R 14 DVD_A_OUT_L 15 16 17 18 19 20 21 22 [V]Y_VIDEO [U]C_VIDEO GND RX P.CON+3.3V P.CON+12V P.CON+A5V GND(M) MOTOR_GND

W850 W851 W856 W857 B3023 FCM1608KF-102T02 B3016 FCM1608KF-102T02 B3013

DVD_R DVD_L DVD_Y DVD_C TWIRE_RXDC SW+12V

D D LCD+B_SW Q3010 RTQ035P02 D 5 5.2 D 6 5.2

B3017 DVD+3.3V BLM18PG181SN1D

S 4 5.8 C3042 1 B

L3003 22uH TSL0808 VB 2 3.3 1.8 V_OUT V_ADJ GND 6 1.3 4 0 5

(DDR2:typ 1095mA) 6.3V 330 V-S

D1.8V

BLM18PG181SN1D

R3038

75

(CP8501,CP8502) TO DVD PCB CD3002 10P CH 10P CH E82M1101 R3039

AT+5.8V 3.0 AT+5.8V 5.8 SW Q3002 KRA101SRTK 3.3 R3004 SW 0 Q3001 KRC102SRTK 4.7K 5.8 0 0 SYS_POWER_H R3003 2.2K D3.3V REG_SW D3003 EC31QS04 R3007 16V 10 V-S 100 C3047

C3048

1.8V_REGULATOR IC IC3003 V_IN PQ035ZN1HZPH

D3.3V ZERO_MUTE D5.0V DVD_SPDIF FILTER_MUTE AT+5.8V GND

GND R3015 C3023 2.2 B R3013 6.8K +-1% R3017 150 +-1% PCBDH0 CEG360

C3065

C3066

75

C3018

2.2 B

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. :SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

CAUTION: DIGITAL TRANSISTOR

CAUTION: DIGITAL TRANSISTOR

3.3K

H-45

22LV505

H-46

POWER SCHEMATIC DIAGRAM


8

(POWER PCB)
KX 250V 0.001 KX 12M 1W C507 TO BACKLIGHT INVERTER INV+B TH501_1 5D2-08LCS 275V 0.1 ECQUL 28.0 D510 200V 270 KXW RM11C-EIC D518 RM11C-EIC C502 T501_1 81240018 1 12 11 10 9 2.8 1W R510 20.0 5 6 8 7 9.0 W807 5.0 0 0 9.0 0 D515 FCH10A10 2 W836 L503 22uH TSL0808 1 INV_GND POWER_ON_H INV+B INV_GND LIGHT_CTL INVERTER_H GND SW Q503 KRA103MAT 12.0 12.0 SW Q504 KRC103MAT 3.0 0 0 D523 RB095T-90 1 2 R551 100 1/4W 10V 2200 ZL 25V 0 0 2 DC-DC CONVERTER IC503 LA5797M-TE-L-E 1 8 11.87 22.03 V_IN EN NC NC VRET CPOUT GND FB 6.24 7 0 R533 NC NC 3 6 10K 1.19 4 5 25V C539 0.15 B R543 47K S_DET AT+12V AT+5.8V D520 C545 C538 25V 0.15 B MA111 D519 25V 0.15 B

R503

0.001

ECQUL

ENE241D-10A-Q6

D504

C506

275V 0.22

R509

C508

4 2

3 1 W810

1.2M 1W RCR

P201-2476-2 CD501 P201-2476-2

J501 CCT2302-0901C

W828

250V

W808

C510

NC

D508 RM11C-EIC D507 RM11C-EIC

NC 2 65.0 3

7
TO SOUND AMP POWER_ON_H SOUND+B SOUND_GND GND AT+5.8V FILTER_MUTE

2 NC

F501 51MS040L

D521

C546

MA111

D505

1F5-E

0.22

C531

4A 125V

R536 220K

MA111 TO JACK OUT

400V 0.022 PP

2KV 680P R

56K 1W C518

C513

R512

SWITCHING Q501 STF10NK50Z D 80.0 35.0 G 33 1/4W R506 R505_1 S 35.0 33K

22K 1/2W

R504

C543_1 1 L504 16V 1000 ZL 16V 220 MHE 5mm C511_1 C512 10uH TSL0808 B

0.15 B 25V

4A125V FH501 FH502 EYF-52BCY EYF-52BCY

L501 SS24H-10100

MA111 D522

P.CON+32V

16V 1000 ZL

22K 1/2W

R501

C504

HS503 763WAA0381 HS502 763WAA0381 NC NC

50V(21-25)

R502 150

(21-25) 1.5 1/4W +-1% R544 (21-25) 1.5 1/4W +-1% R545 (21-25) 1.5 1/4W +-1% R546 100 1/4W D506 1H3-E R507 (21-25) 1.5 1/4W +-1% R547 B501 W4BRH3.5X6X1.0

SARS01-V1

D512

100 1/4W

R518

C525

GND D516 1H3-E C520 R538 50V 4.7 YXF D517 MTZJ8.2B D514 C522 RU3AM-EIC R513 82K 16V 1000 ZL R529 2.2K 1/4W 6.0 6.0 POWER FAIL SW Q505 KTA1504S_Y_RTK R535 8.2K 1/4W W835 SOUND+B 10K 1/4W R521 100 1/4W R531 10K

C517 330P B D511 1H3-E

6.0

POWER_FAIL

POWER CONTORL IC501 FA5531P-A2 1 8 5.0 2.8 1.2 0 ZCD FB IS GND VH NC VCC OUT 1.84

SOUND_GND

NC 24.5 23.8 UDZSNP33B C509_1 D509 2.5mm C516 B R511 33 1/4W 50V 47 YXF

CH

0.001

330P

22P CH

C501

C503

C505

R515

HS501 763WAA0381 1K NC FEED BACK IC505 PS2561AL1-1-V(W) 12.0 1 11.0

0.1

R517 470 +-1% 1K R524 C521 0.1 B C523_1 +-1% 0.47 MMTS R523 R519 10K FROM/TO REGULATOR 0.001 B C526 CP501 (CP3001) 127301123K2 S_DET FILTER_MUTE NC P.CON+32V AT+12V S1_DET POP_MUTE P.CON+32V AT+12V AT+12V AT+5.8V AT+5.8V 2.2K +-1% 16V 100 YK R525 AT+5.8V AT+5.8V NC P.CON+3.8V P.CON+3.8V GND GND GND GND GND NC POWER_ON_H LIGHT_CTL INVERTER_H POWER_FAIL 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 FILTER_MUTE 2

250V 470P KX

REGULATOR IC502 KIA431A-AT C 3 4.0 A 2 4.0 REF 1 2.5

2.7K

2.8

C514

GND

C535

DTV POWER ON_H17 POWER_ON-H 18 LIGHT_CTL INVERTER_H 19 20 22 23

POWER_FAIL 21 NC NC KEY-B KEY-A

NOTE: THE RESISTOR MARKED F IS FUSE RESISTOR. THE ALUMI ELECTROLYTIC CAPACITOR MARKED NP IS NON POLAR ONE.
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

4A 125V

CAUTION:

IS THE LIVE CONNECTION

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE CAUTION: DIGITAL TRANSISTOR CAUTION: DIGITAL TRANSISTOR

PCB240 CEG362

PROTECTION AGAINST FIRE CAUTION :FOR CONTINUEDWITH THE SAME TYPE FUSE HAZARD, (F501) REPLACE ONLY 4A 125V LES DINCEIE ATTENTION :POUR UNE PROTECTION CONTINUEMEMERISQUES4A 125V (F501) NUTILISER QUE DES FUSIBLE DE TYPE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

H-47

19LV505/19LV506

H-48

POWER SCHEMATIC DIAGRAM


8

(POWER PCB)
KX 250V 0.001 KX TO BACKLIGHT INVERTER INV+B TH501_1 5D2-08LCS 275V 0.1 ECQUL 169.0 D510 200V 270 KXW RM11C-EIC D518 RM11C-EIC C502 T501_1 81240018 1 12 11 10 9 0 1W R510 0 5 6 8 7 12.0 W807 5.8 0 0 D515 RB095T-90 1 12.0 0 2 W836 L503 22uH TSL0808 R551 D523 RB095T-90 1 2 100 1/4W INV_GND POWER_ON_H INV+B INV_GND LIGHT_CTL INVERTER_H DC-DC CONVERTER IC503 LA5797M-TE-L-E 1 8 12.0 0 C531 25V 1 B V_IN EN NC NC VRET CPOUT GND FB 0 0 0 R533 10K

0.001

C507

C506 275V 0.22 ECQUL

1.2M 1W RCR

NC

ENE241D-10A-Q6

P201-2476-2 CD501 P201-2476-2

J501 CCT2302-0901C

250V

W808

C510

D508 RM11C-EIC D507 RM11C-EIC

NC 2 169.0 3

7
D520 C545 C538 25V 0.15 B MA111 D519 25V 0.15 B TO SOUND AMP POWER_ON_H SOUND+B SOUND_GND GND AT+5.8V P.CON+32V FILTER_MUTE TO JACK OUT S_DET GND AT+12V

D504

1 W810

R509

C508

SW Q503 KRA103MAT 12.0 0 SW Q504 KRC103MAT0 12.0

NC

F501 51MS040L 4A125V

L501 SS24H-10100

MA111 D522 C546 C539 25V 0.15 B MA111 D521

0.22

NC NC

D505

1F5-E

3.0 0

1.3

4A 125V

R536 220K C543_1

R543 47K 1

MA111

22K 1/2W 22K 1/2W

400V 0.022 PP

56K 1W

R512

2KV 470P R

R504

C513

C518

SWITCHING Q501 STF10NK50Z D 169.0 20.0 G 33 1/4W R505_1 S 1.8 R506 33K

25V 0.15 B

FH501 EYF-52BCY

FH502 EYF-52BCY

B 50V(21-25)

16V 1000 ZL

10V 2200 ZL

C504

C525

100 1/4W

R501

R518

SARS01-V1

16V 1000 ZL

5mm C511_1

R502 150

(21-25) 1.5 1/4W +-1% R544 (21-25) 1.5 1/4W +-1% R545 (21-25) 1.5 1/4W +-1% R546 100 1/4W B501 W4BRH3.5X6X1.0

D512

NC

NC

C512

10uH TSL0808

16V 220 MHE

HS502 HS503 763WAA0381 763WAA0381

L504

AT+5.8V

GND

D516 1H3-E C517 330P B D511 1H3-E D514

C520 R538 R521 50V 4.7 YXF D517 MTZJ8.2B R529 2.2K 1/4W 5.8 4.0 R535 8.2K 16V 1000 ZL 1/4W SOUND+B C522 POWER FAIL SW Q505 KTA1504S_Y_RTK 10K 1/4W 100 1/4W R531 10K

5.8

D506

1H3-E

R507

(21-25) 1.5 1/4W +-1% R547

W835 POWER_FAIL

5
POWER CONTORL IC501 FA5531P-A2 1 8 5.7 2.8 1.8 C501 CH B C503 0 ZCD FB IS GND VH NC VCC OUT 169.0

RU3AM-EIC R513 82K

SOUND_GND

NC 21.0 21.3 UDZSNP33B B C516 50V 47 YXF 2.5mm R511 33 1/4W

0.001

22P CH

330P

C505

C509_1

D509

0.1

HS501 763WAA0381 R515 1K NC FEED BACK IC505 PS2561AL1-1-V(W) 12.0 1 11.0 C521

R517 470 +-1% C526 1K R524 R519 C523_1 0.47 MMTS +-1% 10K FROM/TO REGULATOR 0.001 B CP501 (CP3001) 127301123K2 S_DET FILTER_MUTE NC P.CON+32V AT+12V S1_DET POP_MUTE P.CON+32V AT+12V AT+12V AT+5.8V AT+5.8V 2.2K +-1% R525 P/CON+3.3V C535 AT+5.8V AT+5.8V 16V 100 YK P.CON+3.8V P.CON+3.8V GND GND GND GND GND NC POWER_ON_H LIGHT_CTL INVERTER_H POWER_FAIL 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 FILTER_MUTE 2

0.1 B

2.8 0 250V 470P KX

R523 REGULATOR IC502 KIA431A-AT C 3 11.0 A 2 0 REF 1 2.5

2.7K

C514

GND

DTV POWER ON_H17 POWER_ON-H 18 LIGHT_CTL INVERTER_H 19 20 22 23

4A 125V

POWER_FAIL 21 NC NC KEY-B KEY-A

CAUTION:

IS THE LIVE CONNECTION

PROTECTION AGAINST FIRE CAUTION :FOR CONTINUEDWITH THE SAME TYPE FUSE HAZARD, (F501) REPLACE ONLY 4A 125V LES DINCEIE ATTENTION :POUR UNE PROTECTION CONTINUEMEMERISQUES4A 125V (F501) NUTILISER QUE DES FUSIBLE DE TYPE

PCB240 CEG362

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED NOTE: THE RESISTOR MARKED F IS FUSE RESISTOR. WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST THE ALUMI ELECTROLYTIC CAPACITOR MARKED NP WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. IS NON POLAR ONE.

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

CAUTION: DIGITAL TRANSISTOR

CAUTION: DIGITAL TRANSISTOR

H-49

22LV505

H-50

BACKLIGHT INVERTER SCHEMATIC DIAGRAM


8

(POWER PCB)

HIGH VOLTAGE 6KV 10P SL

C7030

7
C7031

7
MA111 D7019 D7023 MA111 CD7005 E82E1201 R7049 10 1/4W MA111 D7017 MA111 IS_DET1 NC NC NC NC VS_DET NC HV NC NC NC NC NC LV LV 680 NC R7050 10 1/4W IS_DET2 NC NC NC NC NC NC NC NC NC HV 1 2 3 4 5 6 7 8 9 10 11 12 13 14 LV HV 2 1 HV LV 1 2

T7001 8135109G FROM POWER 12.4 1 F7001 INV+B 22 1W 1206FA5A-T 5A 32V 10uH TSL0808 16V 470 ZL R7038 C7006 12.6 3 12.4 4 6 5 L7001 12.6 2 7 8 0 0 3.1

D7014

CN1

0.01

INV_SGND 1SS133 D7018 D7020 MA111 R7046

3.1 D7013 0.01 B C7032 MA111

500V 0.0047 B

INV_GND W821

1SS133 R7035 22 1/4W

C7017

D7024

D7003

MA111

W819

D7006 1SS133 R7036_1 16V 470 ZL 22 1/4W D 22 1W R7039 12.4 2.6 G HIGH VOLTAGE HIGH VOLTAGE

C7020

6KV 10P SL

DRIVE Q7005 TK30A06J3(ORION.Q) 12.4 D 2.6 G

C7033

CN2

500V 0.0047 B

C7018

DRIVE 0 S Q7004 TK30A06J3(ORION.Q)

5
CD7006 E82E1201 6KV 10P SL T7002 8135109G 12.4 1 8 0 2 16V 470 ZL 7 6 5 0 3.1 C7027 3.1 C7026 HV_ NC NC MA111 D7025 MA111 D7021 NC NC R7051 10 1/4W 1SS133 R7047 D7015 680 NC NC VS_DET INV_SGND D7016 MA111 D7012 0.01 B C7028 MA111 R7048 NC NC NC IS_DET3 NC NC NC NC NC NC LV LV NC NC NC NC NC HV_ 680 1 2 3 4 5 6 7 8 9 10 11 12 13 14 LV HV_ 2 1

CN3
HV_ LV 1 2

INVERTER COTROL IC IC7001 BD9882FV-E2 2.1 20 DUTY BRT VCC FAIL N1 PGND N2 1 R7009 R7012 220 +-1% BCT RT SRT CT INV GND FB IS VS 18 3 1.3 1.5 R7013 56K 1.1 SCP SS REG 15 6 0 14 7 0 C7002 0.0047 B C7007 0.0047 B 13 8 0 0 3.1 C7008 R7020 100K 0.47 B C7009 0.1 B C7010 0.1 12 R7017 10K B 1.7 16 5 0 0 17 4 R7024 10 1/4W 1.5 19 2 3.4 C7011 C7022 1 3.1 C7012 0.01 B R7023 10 1/4W 47K +-1% C7004 0.047 B R7010 27K +-1% R7007 220K +-1% C7003 330P CH B

12.6 12.6 3 12.4 4

0.01

B D7011 MA111

CN4

D7022

MA111

R7052 D7026 MA111 10 1/4W

IS_DET4

0.1 0.1

6KV 10P SL

C7029

0.001 B

R7053

C7034

C7035

R7054

680K

1.5 10 STB 11

R7005

100

5.1 R7014

10K R7018 10K

680K

R7019 D7002 D7004 D7005 1SS133 1SS133 1SS133

0.001 B

COMP

3
C7025 0.001 B R7044 R7043 330K

FROM POWER R7001 LIGHT_CTL R7002 C7001 0.1 B 18K 2.7K 1/4W 4.7K 47K R7003 R7008

R7011 100K 1/4W

15K 1/4W 0 FEED BACK 3.7 Q7003 G 2SK3018T106 0.001 B 220 1/4W R7026 R7025 39 +-1% 0.17 FEED_BACK IC IC7002 LM2902DR R7056 4.7K 1/4W 56K +-1% 1 2 3.62 3 1.58 4 Vcc 13.04 1.58 5 6 3.64 7 0.17

330K 1/4W C7023 0.001 B

D S

0 R7006

4.7K

R7033

R7022

R7030

5.6K

560K

2
R7004 INVERTER_H 1K 1/4W

2
1SS133 D7010 IS_DET4 GND 13 12 11 10 14 9 8 0.17 0 1.58 3.6 NC11.98 0.025 1.58 C7024 0.001 B R7041 1SS133 D7008 330K 1SS133 D7009 IS_DET2 IS_DET3

390 +-1%

C7013

R7021

100K +-1%

R7032

R7034

C7015

0.001 B R7040

C7016

0.001 B

R7037

C7019

560K

680K

INV_SGND

IS_DET1

VS_DET

680K

PCB240 CEG362

1
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

H-51

19LV505/19LV506

H-52

BACKLIGHT INVERTER SCHEMATIC DIAGRAM


8

(POWER PCB)

HIGH VOLTAGE 6KV 10P SL

C7030

7
C7031

7
D7023 MA111 MA111 CD7005 E82E1201 R7049 10 1/4W R7045 680 IS_DET1 NC NC NC NC VS_DET NC HV NC NC NC NC NC LV LV 680 NC R7050 10 1/4W IS_DET2 NC NC NC NC NC NC NC NC NC HV 1 2 3 4 5 6 7 8 9 10 11 12 13 14 LV HV 2 1 HV LV 1 2 D7019

0.022 B

T7001 8135113G FROM POWER 12.4 1 F7001 INV+B 22 1W 1206FA5A-T 5A 32V 10uH TSL0808 16V 470 ZL R7038 C7006 L7001 12.6 12.6 12.4 2 3 4 8 7 6 5 0 0 3.1

D7014 D7017 MA111 MA111

CN1

INV_SGND 1SS133 D7018 D7020 MA111 R7046

3.1 D7013 C7032 MA111 B

INV_GND W821

R7035 22 1/4W

6KV 10P SL 0.022

C7017

1SS133

500V 0.0047 B

D7024

MA111

D7003

DRIVE Q7005 TK30A06J3(ORION.Q) 12.4 D 2.6 G S 0

W819

D7006 1SS133 R7036_1 16V 470 ZL 22 1/4W D 22 1W R7039 12.4 2.6 G HIGH VOLTAGE HIGH VOLTAGE

C7020

C7033

CN2

500V 0.0047 B

C7018

DRIVE 0 S Q7004 TK30A06J3(ORION.Q)

5
CD7006 E82E1201 6KV 10P SL T7002 8135113G 12.4 1 8 0 2 16V 470 ZL 7 6 5 0 3.1 C7027 3.1 C7026 HV_ NC NC D7025 MA111 NC NC R7051 10 1/4W R7047 680 NC NC VS_DET INV_SGND D7016 MA111 D7012 0.022 B MA111 C7028 R7048 NC NC NC IS_DET3 NC NC NC NC NC NC LV LV NC NC NC NC NC HV_ 680 1 2 3 4 5 6 7 8 9 10 11 12 13 14 LV HV_ 2 1

CN3
HV_ LV 1 2

0.022 B

2.1 20 DUTY BRT VCC FAIL N1 PGND N2 1 R7009 R7012 C7004 0.047 B R7010 33K +-1% R7007 180K +-1% C7003 330P CH 0 INV GND FB IS VS SS REG 14 7 0 0.0047 B C7007 0.047 B 13 8 C7002 1.5 19 2

3.4

C7011 C7022 1 B

12.6 3 12.4 4

D7011 D7015 MA111

BCT RT SRT CT

18

47K +-1%

220 +-1% 1.3 1.5 R7013 1.7 82K 1.1

C7012 0 0 0.01 B R7023 10 1/4W

1SS133

3.1

MA111

D7021

INVERTER COTROL IC IC7001 BD9882FV-E2

12.6

17

16

0 0 0 3.1 C7008 R7020

R7024 10 1/4W

CN4

D7022

MA111

SCP

15

R7052 D7026 MA111 10 1/4W

0.1 12 R7017 10K

B 0.001 B R7053 C7034 C7035 R7054 680K 680K R7019 D7002 D7004 D7005 1SS133 1SS133 1SS133 0.001 B

0.1 0.1

6KV 10P SL

C7029

0.1 B C7010

100K

0.47 B C7009

IS_DET4

COMP STB

3
C7025 0.001 B

1.5 10 11

R7005

100

5.1 R7014

10K R7018 10K

FROM POWER R7001 LIGHT_CTL 2.7K 1/4W R7002 18K 4.7K C7001 0.1 B 47K R7003 R7008

R7011 100K 1/4W

15K 1/4W 0 FEED BACK 3.7 Q7003 G 2SK3018T106 150 +-1% 4.7K +-1% 0.001 B R7025 B 9.1 FEED_BACK IC IC7002 LM2902DR R7056 4.7K 1/4W 0.01 56K +-1% 1 2 4.8 3 2.8 4 Vcc 10.3 5 2.8 6 4.8 7 9.1

R7043

R7044 330K 1/4W

330K

C7023 0.001 B 1SS133 D7010

D S

0 R7006

4.7K

R7030

1SS133

R7033

D7001

1M

2
5.6K R7004 INVERTER_H 1K 1/4W

2
GND 14 9.1 13 4.8 12 2.8 11 0 10 2.8 9 4.8 8 0.001 9.1 R7042 B R7041 330K 1SS133 1SS133 D7007 D7008 1SS133 D7009 C7024

C7013

R7021

R7026

C7014

15K 1/4W R7027

15K +-1%

15K 1/4W R7028

15K 1/4W R7029

15K 1/4W

R7022

R7032

0.001 B

R7034

C7015

330K 1/4W 0.001 B R7040 C7016 0.001 B R7037 C7019 680K 680K C7021 0.001 B

680K

INV_SGND

PCB240 CEG362 IS_DET3 IS_DET4

IS_DET1

IS_DET2

IS_DET3

IS_DET4

VS_DET

IS_DET1

IS_DET2

1
NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. :SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY ARE ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

H-53

22LV505

H-54

SOUND AMP SCHEMATIC DIAGRAM


(POWER PCB)

SOUND AMP IC IC301 LA42052-E

Ripple Filter IN1 1 2 7.4 FROM JACK OUT C303 LOUT_SOUND C301 ROUT_SOUND 1 B 1 B 1.6

GND 3 0

IN2 4 1.6

STB 5 1.6

P.P 6 10.3

Vcc 7 14.0

OUT2 8 7.4

NC 9 NC

GND 10 0

NC 11

OUT1 12

NC 13 NC R308 15 W823 1K 1/4W HEADPHONE JACK J301 PJ-364H 5 R309 16 W820 R310 1K 1/4W 1K 1/4W B307 B308 HCB3216KF-391T20 3 6 7 1 1K 1/4W R 4 2 L

NC 7.4

D301 EC11FS2-TE12L

R304 2.2K R305 MHE 2.2K

R306 2.2K R307 16V 470 MHE 2.2K C311

HCB3216KF-391T20

R311

C310 FROM POWER

16V 470

S803X R302

C319

C320 0.0068 B

B303 HCB3216KF-391T20 CD301 W824 E8142401 4 3 2 1 4 3 2 1 SPEAKER SP302 S0308F01 GND GND SP OUT R HS301 763WSA0064 W803 SP OUT L SPEAKER SP301 S0308F01

0.0068 B FILTER_MUTE SOUND+B 6.3V 220 MHE C308 CH POWER_ON_H 16V 100 MHE C305 0.0022 CH C307 35V 470 MHE 4.7 B C309

6.8K

1/4W

W827

GND AT+5.8V

W806

R313

6.0 6.0

22K

6.0

R314 470 1/4W

2.8

SW Q301 KTA1504S_Y_RTK

SW Q302 KRC102SRTK 0

0.0022

SOUND_GND

C304

C306

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

CAUTION: DIGITAL TRANSISTOR

PCB240 CEG362

H-55

19LV505/19LV506

H-56

SOUND AMP SCHEMATIC DIAGRAM


8

(POWER PCB)

SOUND AMP IC IC301 LA42052-E

6
Ripple Filter IN1 1 2 7.4 FROM JACK OUT C303 LOUT_SOUND D301 EC11FS2-TE12L C301 ROUT_SOUND 1 B 1 B R304 2.2K R305 MHE 2.2K R306 2.2K R307 16V 470 MHE 2.2K C311 16 W820 R310 1K 1/4W R309 1K 1/4W B307 B308 HCB3216KF-391T20 3 6 7 1 1K 1/4W R 15 1.6 GND 3 0 1.6 IN2 4 1.6 STB 5 10.3 P.P 6 14.0 Vcc 7 7.4 OUT2 8 NC 9 NC GND 10 0 NC 11 OUT1 12 NC 13 NC W823 R308 1K 1/4W HEADPHONE JACK J301 PJ-364H 5 4 2 L

NC 7.4

HCB3216KF-391T20

5
FROM POWER

R311

C310

S803X

16V 470

C319

C320 0.0068 B

B303 HCB3216KF-391T20 CD301 W824 E8142403 4 3 2 1 4 3 2 1 SPEAKER SP302 S0308F01 GND GND SP OUT R HS301 763WSA0064 W803 SP OUT L SPEAKER SP301 S0308F01

FILTER_MUTE R302 6.8K SOUND+B 6.3V 220 MHE C308 CH POWER_ON_H C304 16V 100 MHE C305 0.0022 CH C307 35V 470 MHE 4.7 B C309 1/4W

0.0068 B

W827

0.0022

C306

SOUND_GND W806 GND AT+5.8V R313 5.8 1.6 22K 5.8 R314 470 1/4W 0 5.8 SW Q302 KRC102SRTK 3.0 SW Q301 KTA1504S_Y_RTK

PCB240 CEG362

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

CAUTION: DIGITAL TRANSISTOR

H-57

22LV505

H-58

JACK OUT SCHEMATIC DIAGRAM


8

(POWER PCB)

S803Y

W839

JACK_GND

FROM/TO JACK CP8101 127301123K2 23 22 21 20 LOUT GND ROUT GND AV1_C GND AV1_Y GND YUV L IN GND YUV R IN GND CVBS1 GND EVQ21505R AV1 L IN GND AV1 R IN GND AV3_V GND 100P CH R8104 75 GND AV3_Y AV3_Y PCB270 CEG363 75 AV3_U 100P CH R8107 C8103 C8109 AV3_PB AV3_PR AR1 CH DOWN/STOP SW2202 AL1 EVQ21505R EJECT SW2201 EVQ21505R EVQ21505R INPUT SW2204 POWER SW2203 AV1_CVBS AR2/YUV_A_IN_R R2201 1K R2202 820 R2203 15K VOL DOWN SW2205 EVQ21505R R2204 5.6K EVQ21505R R2205 5.6K CH UP/PLAY SW2207 EVQ21505R R2206 820 EVQ21505R AL2/YUV_A_IN_L AV1_Y C8102 AV1_C AV3_PR ROUT_SOUND AV3_PB LOUT_SOUND AV3_Y R8118 100 R8119 100 R8120 100 100P CH C8105 R8103 C8110

COMPONENT_VIDEO_IN J8102 RCA-341H(NI)-09 H 2 1 3 E E

6 H

18 17 16 15 14 13 12 11 10 9 8

(OPERATION PCB)

100P CH R8108

100P CH R8105

75

75

FROM MICON CP2201 (CD6202) A2001WR2-3P KEY_A KEY_B GND 3 2 1

75

W822 S_DET AV1_Y R8110 R8111 1K 100 Y

VOL UP SW2206

MENU SW2208

19

6 5 4 3 2 1

AV1_C

R8112

100

C S-VIDEO-IN J8101 DIN-417HA-01

COMPONENT_AUDIO_IN J8103 RCA-228H(3)NI-02 2 1 AL2/YUV_A_IN_L R8113 R8114 1K 1K 470P CH C8111 470P CH C8107 H E

S-DET

4
FROM/TO POWER

AR2/YUV_A_IN_R

(REMOCON PCB)
GND S_DET W815 Vout 1 R7602 47 R7605 STAND BY/POWER D7601 LTL-1BEFJ-002A R7604 390 R7603 390 100 FROM/TO MICOM AV1_CVBS CP7601 (CP6203) A2001WR2-5P REMOCON IN GND AT+5V STANDBY AL1 1 2 3 C8104 4 AR1 R8115 R8116 R8117 100 1K 1K 470P CH 470P CH

CVBS_AV_IN J8104 RCA-341H(2)NI-06 H 2 1 E 3 E V L E

GND 2 B+ 3 TO SOUND AMP OS7601 ROM-V338TAO 6.3V 100 KA C7602

6 H

3
LOUT_SOUND ROUT_SOUND

470P CH

C8106

C8108

R8106

POWER ON LED 5

PCBDA0 CEG364

75

NC

PCB240 CEG362

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-59

19LV505/19LV506

H-60

JACK OUT SCHEMATIC DIAGRAM


8

(POWER PCB)
W839

S803Y

JACK_GND

FROM/TO JACK CP8101 (CP4301) 127301123K2 23 22 21 20 19 18 LOUT GND ROUT GND AV1_C GND AV1_Y GND YUV L IN GND YUV R IN GND CVBS1 GND EVQ21505R AV1 L IN GND AV1 R IN GND AV3_V GND 100P CH R8104 75 GND AV3_Y AV3_Y PCB270 CEG363 75 AV3_U 100P CH R8107 C8103 C8109 AV3_PB AV3_PR AR1 CH DOWN/STOP SW2202 AL1 EVQ21505R EJECT SW2201 EVQ21505R EVQ21505R INPUT SW2204 POWER SW2203 AV1_CVBS AR2/YUV_A_IN_R R2201 1K R2202 820 R2203 15K VOL DOWN SW2205 EVQ21505R R2204 5.6K EVQ21505R R2205 5.6K CH UP/PLAY SW2207 EVQ21505R R2206 820 EVQ21505R AL2/YUV_A_IN_L TO MICON CP2201 (CP6202) A2001WR2-3P KEY_A KEY_B GND 3 2 1 AV1_Y AV1_C AV3_PR ROUT_SOUND AV3_PB LOUT_SOUND AV3_Y R8118 100 R8119 100 R8120 100 100P CH

COMPONENT_VIDEO_IN J8102 RCA-341H(NI)-09 H 2 1 5 E 3 E E

100P CH R8108

100P CH R8105

C8102

C8105

R8103

C8110

75

75

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

75

17

(OPERATION PCB)
R8110 R8111 1K 100

6 H

W822 S_DET AV1_Y

Y VOL UP SW2206 MENU SW2208 3 1 5 7 R8112 100 C S-VIDEO-IN J8101 DIN-417HA-01 2 S-DET 4 6

AV1_C

COMPONENT_AUDIO_IN J8103 RCA-228H(3)NI-02 2 1 3 E AL2/YUV_A_IN_L AR2/YUV_A_IN_R R8113 R8114 1K 1K 470P CH C8111 470P CH C8107 H E

TO POWER GND W815 W804 Vout 1 R7602

(REMOCON PCB)
FROM/TO MICON AV1_CVBS 47 R7605 STAND BY/POWER D7601 LTL-1BEFJ-002A R7604 390 100 CP7601 (CP6203) A2001WR2-5P REMOCON IN GND AT+5V STANDBY AL1 1 2 3 C8104 4 AR1 R8115 R8116 R8117 100 1K 1K 470P CH 470P CH

CVBS_AV_IN J8104 RCA-341H(2)NI-06 H 2 1 5 E 3 E V L E

S_DET

GND 2 B+ 3 TO SOUND AMP OS7601 ROM-V338TAO 6.3V 100 KA C7602

470P CH

R7603

C8106

C8108

R8106

75

LOUT_SOUND

390

NC

6 H

ROUT_SOUND

POWER ON LED 5

PCBDA0 CEG364

PCB240 CEG362

NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

H-61

22LV505

H-62

SW SCHEMATIC DIAGRAM
8 8

(SW PCB)
6 6

CD2301 2H061605 1 2 3 4 5 6 GND(SW) PICK UO INNER LIMIT SWITCH FEED MOTOR(-) FEED MOTOR(+) SPINDLE MOTOR(-) SPINDLE MOTOR(+)

SW2 ESE22MH22

M2602 BCZ3B05 M2601 JCV9B12

PCB640 DED020

CAUTION:SINCE THESE PARTS MARKED BY CRITICAL FOR SAFETY,USE ONES


DESCRIBED IN PARTS LIST ONLY

ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

H-63

19LV505/19LV506/22LV505

H-64

INTERCONNECTION DIAGRAM
8 8
SP301 SPEAKER 1 7 6 3 2 4 5 2 H E CD301 4 SP302 SPEAKER 3 2 1 4 3 2 1 SP OUT L GND GND SP OUT R NC 7 CVBS_AV_IN J8104 5 E 3 4 E 1 2 E NC 1 CP2301_1 CP2803 TCK TRST_N TDO HDMI AUDIO IN J4302 TMS TDI RESET_N FLASH_WP NC NC ASEMD0 GND VDD33 GND CP3002 SPDIF-134 ZERO D-SUB CP4303 VGA-R VGA-G NC NC DIGITAL PCB PCBDH0 CEG360 VGA-B NC NC DGND AGND AGND AGND NC NC NC TU5801
23 22

CP501 S_DET FILTER_MUTE P.CON+31V 6 H AT+12V H AT+12V AT+5.8V AT+5.8V AT+5.8V H 1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

CP3001 S_DET FILTER_MUTE POP_MUTE P.CON+31V AT+12V AT+12V AT+5.8V AT+5.8V AT+5.8V P.CON+3.8V P.CON+3.8V GND GND GND GND GND DTV_POWER_ON-HNC POWER_ON-H LIGHT_CTL INVERTER_H POWER_FAIL KEY-B KEY-A NC

COAXIAL J4301

DVD MT PCB PCB130 DMG097 1 2 3 5 6 7 8 9 10 11 12 1 2 3 4 5 6 1 2 3 4 5 7 8 9 10 11 CP8502 1 GND 2 3 4 5 6 7 8 P.CON+3.3V P.CON+3.3V P.CON+12V GND P.CON+A5V P.CON+6V GND(M) TO DVD PCB CD3002 7 8 9 10 11 12 13 14 CP8501 SPDIF-134 GND ZERO DVD_A_OUT_R GND DVD_A_OUT_L DVD RESET [Y]_VIDEO [V]Y_VIDEO [U]C_VIDEO START_SW GND SSCTXD/RX SSCRXD/TX NC

GND F VS VCC E D C SW1(DVD/CD) VRF(RF_OUT) B A VR650(DVD) VRCOM VR780(CD) GND LD_CD(780) PD/GND LD_DVD(650) GND NC TRKG DRV TRKG RTN FOCS DRV FOCS RTN

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 SPINDLE MOTOR DVD DRIVE DM-4PB OPTICAL PICK-UP

POP_MUTE 3

ASEBRKAK_N 4

P201-2476-2 CD501

J501 1

NC

NC COMPONENT_VIDEO_IN J8102 NC E 1 2 E 3 4 E 5

P.CON+3.8V P.CON+3.8V GND GND GND GND GND

2 NC H CD7005 1 HV NC NC NC NC NC LV LV NC NC NC NC NC HV CP7006 1 2 CN3 1 2 HV_ LV 3 4 5 6 7 8 CN4 9 10 11 12 13 14 HV_ NC NC NC NC NC LV LV NC NC NC NC NC HV_ NC NC NC NC NC HEADPHONE JACK J301 NC NC NC NC NC POWER PCB PCB240 CEG362 NC NC NC NC NC 1 3 5 7 S-VIDEO-IN J8101 NC NC NC NC NC 5 4 H 2 H COMPONENT_AUDIO_IN J8103 E E 3 1 H H6

6
1 2

2 CN1 HV LV 3 4 5 6 7 8 CN2 1 2 HV LV 9 10 11 12 13 14 HIGH VOLTAGE

NC DTV POWER ON_H 17 POWER_ON-H 18 LIGHT_CTL 19 INVERTER_H 20 POWER_FAIL 21 NC NC KEY-B KEY-A 22 23

GND DVD_RESET GND TX GND P.CON+3.3V GND P.CON+6V

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

START_SW 6

CP2303 SPD+ SPDSLD+ SLDLIMIT SW SW(GND) 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 FG SENSER SLED,LOADING MOTOR

CP8101 AV3_Y GND AV3_U GND AV3_V GND AV1 R IN GND AV1 L IN GND CVBS1 GND YUV R IN GND YUV L IN GND AV1_Y GND AV1_C GND ROUT GND R LOUT L 3 2 4 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

CP4301 AV3_Y GND AV3_U GND AV3_V GND AV1 R IN GND AV1 L IN GND CVBS1 GND YUV R IN GND YUV L IN GND AV1_Y GND AV1_C GND ROUT GND LOUT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 IF_OUT2 21
25 24

GND 12 DVD_A_OUT_R 13 DVD_A_OUT_L 14 [V]Y_VIDEO 15 [U]C_VIDEO GND RX P.CON+3.3V P.CON+12V P.CON+A5V GND(M) 16 17 18 19 20 21 22

NC DGND NC DDCD VGAHS VGAVS

CP2302 LOAD+ LOADGND (D) OPEN CLOSE 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5

NC NC NC NC

DDCC

NC(BB)

NC 2 NC 3 NC 4 SIF-out HDMI CONNERTOR CP3602 TMDS_DATA2+ TMDS_DATA2_SH TMDS_DATA2TMDS_DATA1+ TMDS_DATA1_SH TMDS_DATA1TMDS_DATA0+ TMDS_DATA0_SH TMDS_DATA0TMDS_CLK+ TMDS_CLK_SH TMDS_CLKCEC RESERVED DDC_SCL DDC_SDA DDC_GND +5V_POWER HOT PLUG NC NC NC NC IF_OUT 18 IF_AGC 19 IF_OUT1 20 IF_O NC NC SCL 15 AFT 16 +5V 17 SDA 14 +30V 12 TU 11 AGC 7 V_OUT 8 +5V 9 5

CP2804 NC SUB MICON CP6201 GND TX MODE NC NC NC VCC CNVSS RX NC NC RESET GND NC GND 1 2 3 4 5 6 7 8 9 10 11 VDD+5V/+3.3V VDD+5V/+3.3V NC /(GND) GND RXO3+ RXOC+ RXO2+ RXO1+ RXO0+ GND RXE3+ RXEC+ RXE2+ RXE1+ RXE0+ VDD+5V/+3.3V NC /(GND) NC /(GND) EEP/PC_TOOL_JIG_CON CP2801 GND SCL SDA NC IIC_OFF D_GND 1 2 3 4 5 GND RXO3RXOCRXO2RXO1RXO0GND RXE3RXECRXE2RXE1RXE01 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 LCD PANEL V2801_1 LVDS CD2804

1 2

HV_ LV

CP2201

CD6202 1 2 3 1 2 3 1 2 3 1 2 3 GND KEY B KEY A

OPERATION PCB PCB270 CEG363

GND KEY_B KEY_A

COMMAND TRANSMITTER TM101

CP7601 STAND BY/POWER D7601 1 Vout 2 GND 3 B+ OS7601 REMOCON PCB PCBDA0 CEG364 G R REMOCON IN GND AT+5V POWER ON LED 1 2 3 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5

CD6203 REMOCON IN GND AT+5V STANDBY LED POWER ON LED

PC_TOOL_RX 6 PC_TOOL_TX 7 D3.3V NC NC/RESET 8 9

STANDBY 4

1
NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

1
ARE ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

H-65

19LV505

H-66

INTERCONNECTION DIAGRAM
8 8
SP301 SPEAKER 1 7 6 3 2 4 5 2 H E CD301 4 SP302 SPEAKER 3 2 1 4 3 2 1 SP OUT L GND GND SP OUT R NC 7 CVBS_AV_IN J8104 5 E 3 4 E 1 2 E NC 1 CP2301_1 CP2803 TCK TRST_N TDO HDMI AUDIO IN J4302 TMS TDI RESET_N FLASH_WP NC NC ASEMD0 GND VDD33 GND CP3002 SPDIF-134 ZERO D-SUB CP4303 VGA-R VGA-G NC NC DIGITAL PCB PCBDH0 CEG360 VGA-B NC NC DGND AGND AGND AGND NC NC NC TU5801
23 22

CP501 S_DET FILTER_MUTE P.CON+31V 6 H AT+12V H AT+12V AT+5.8V AT+5.8V AT+5.8V H 1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

CP3001 S_DET FILTER_MUTE POP_MUTE P.CON+31V AT+12V AT+12V AT+5.8V AT+5.8V AT+5.8V P.CON+3.8V P.CON+3.8V GND GND GND GND GND DTV_POWER_ON-HNC POWER_ON-H LIGHT_CTL INVERTER_H POWER_FAIL KEY-B KEY-A NC

COAXIAL J4301

DVD MT PCB PCB130 DMG097 1 2 3 5 6 7 8 9 10 11 12 1 2 3 4 5 6 1 2 3 4 5 7 8 9 10 11 CP8502 1 GND 2 3 4 5 6 7 8 P.CON+3.3V P.CON+3.3V P.CON+12V GND P.CON+A5V P.CON+6V GND(M) TO DVD PCB CD3002 7 8 9 10 11 12 13 14 CP8501 SPDIF-134 GND ZERO DVD_A_OUT_R GND DVD_A_OUT_L DVD RESET [Y]_VIDEO [V]Y_VIDEO [U]C_VIDEO START_SW GND SSCTXD/RX SSCRXD/TX NC

GND F VS VCC E D C SW1(DVD/CD) VRF(RF_OUT) B A VR650(DVD) VRCOM VR780(CD) GND LD_CD(780) PD/GND LD_DVD(650) GND NC TRKG DRV TRKG RTN FOCS DRV FOCS RTN

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 SPINDLE MOTOR DVD DRIVE DM-4PB OPTICAL PICK-UP

POP_MUTE 3

ASEBRKAK_N 4

P201-2476-2 CD501

J501 1

NC

NC COMPONENT_VIDEO_IN J8102 NC E 1 2 E 3 4 E 5

P.CON+3.8V P.CON+3.8V GND GND GND GND GND

2 NC H CD7005 1 HV NC NC NC NC NC LV LV NC NC NC NC NC HV CP7006 1 2 CN3 1 2 HV_ LV 3 4 5 6 7 8 CN4 9 10 11 12 13 14 HV_ NC NC NC NC NC LV LV NC NC NC NC NC HV_ NC NC NC NC NC HEADPHONE JACK J301 NC NC NC NC NC POWER PCB PCB240 CEG362 NC NC NC NC NC 1 3 5 7 S-VIDEO-IN J8101 NC NC NC NC NC 5 4 H 2 H COMPONENT_AUDIO_IN J8103 E E 3 1 H H6

6
1 2

2 CN1 HV LV 3 4 5 6 7 8 CN2 1 2 HV LV 9 10 11 12 13 14 HIGH VOLTAGE

NC DTV POWER ON_H 17 POWER_ON-H 18 LIGHT_CTL 19 INVERTER_H 20 POWER_FAIL 21 NC NC KEY-B KEY-A 22 23

GND DVD_RESET GND TX GND P.CON+3.3V GND P.CON+6V

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

START_SW 6

CP2303 SPD+ SPDSLD+ SLDLIMIT SW SW(GND) 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 FG SENSER SLED,LOADING MOTOR

CP8101 AV3_Y GND AV3_U GND AV3_V GND AV1 R IN GND AV1 L IN GND CVBS1 GND YUV R IN GND YUV L IN GND AV1_Y GND AV1_C GND ROUT GND R LOUT L 3 2 4 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

CP4301 AV3_Y GND AV3_U GND AV3_V GND AV1 R IN GND AV1 L IN GND CVBS1 GND YUV R IN GND YUV L IN GND AV1_Y GND AV1_C GND ROUT GND LOUT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 IF_OUT2 21
25 24

GND 12 DVD_A_OUT_R 13 DVD_A_OUT_L 14 [V]Y_VIDEO 15 [U]C_VIDEO GND RX P.CON+3.3V P.CON+12V P.CON+A5V GND(M) 16 17 18 19 20 21 22

NC DGND NC DDCD VGAHS VGAVS

CP2302 LOAD+ LOADGND (D) OPEN CLOSE 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5

NC NC NC NC

DDCC

NC(BB)

NC 2 NC 3 NC 4 SIF-out HDMI CONNERTOR CP3602 TMDS_DATA2+ TMDS_DATA2_SH TMDS_DATA2TMDS_DATA1+ TMDS_DATA1_SH TMDS_DATA1TMDS_DATA0+ TMDS_DATA0_SH TMDS_DATA0TMDS_CLK+ TMDS_CLK_SH TMDS_CLKCEC RESERVED DDC_SCL DDC_SDA DDC_GND +5V_POWER HOT PLUG NC NC NC NC IF_OUT 18 IF_AGC 19 IF_OUT1 20 IF_O NC NC SCL 15 AFT 16 +5V 17 SDA 14 +30V 12 TU 11 AGC 7 V_OUT 8 +5V 9 5

CP2804 NC SUB MICON CP6201 GND TX MODE NC NC NC VCC CNVSS RX NC NC RESET GND NC GND 1 2 3 4 5 6 7 8 9 10 11 VDD+5V/+3.3V VDD+5V/+3.3V NC /(GND) GND RXO3+ RXOC+ RXO2+ RXO1+ RXO0+ GND RXE3+ RXEC+ RXE2+ RXE1+ RXE0+ VDD+5V/+3.3V NC /(GND) NC /(GND) EEP/PC_TOOL_JIG_CON CP2801 GND SCL SDA NC IIC_OFF D_GND 1 2 3 4 5 GND RXO3RXOCRXO2RXO1RXO0GND RXE3RXECRXE2RXE1RXE01 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 LCD PANEL V2801_1 LVDS CD2804

1 2

HV_ LV

CP2201

CD6202 1 2 3 1 2 3 1 2 3 1 2 3 GND KEY B KEY A

OPERATION PCB PCB270 CEG363

GND KEY_B KEY_A

COMMAND TRANSMITTER TM101

CP7601 STAND BY/POWER D7601 1 Vout 2 GND 3 B+ OS7601 REMOCON PCB PCBDA0 CEG364 G R REMOCON IN GND AT+5V POWER ON LED 1 2 3 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5

CD6203 REMOCON IN GND AT+5V STANDBY LED POWER ON LED

PC_TOOL_RX 6 PC_TOOL_TX 7 D3.3V NC NC/RESET 8 9

STANDBY 4

1
NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

1
ARE ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

H-67

19LV506

H-68

INTERCONNECTION DIAGRAM
8 8

SPEAKER SP301 CD301 1 2 SPEAKER SP302 3 4 1 2 3 4 SP OUT R GND GND SP OUT L 6 7 CD7005 1 2 3 1 2 HV LV 4 5 6 7 8 9 2 1 LV HV 10 11 12 13 14 HIGH VOLTAGE CD7006 1 2 1 2 HV_ LV 3 4 5 6 7 8 9 2 1 LV HV_ 10 11 12 13 14 HV_ NC H E 2 1 NC NC CVBS_AV_IN J8104 H E 4 3 NC NC 6 H E 5 LV LV NC NC NC NC NC HV_ POWER PCB PCB240 CEG362 AV3_Y GND AV3_U GND AV3_V GND AV1 R IN GND AV1 L IN GND CVBS1 GND YUV R IN GND YUV L IN HEADPHONE JACK J301 J501 1 NC GND AV1_Y GND AV1_C GND ROUT R NC L 5 4 2 3 GND LOUT 1 2 HV COMPONENT_VIDEO_IN J8102 NC NC NC NC NC LV LV NC COMPONENT_AUDIO_IN J8103 NC H NC NC HV 2 1 E NC H E 2 1 5 2 4 3 S-VIDEO-IN J8101 1 NC S_DET FILTER_MUTE POP_MUTE P.CON+31V AT+12V AT+12V AT+5.8V AT+5.8V AT+5.8V P.CON+3.8V P.CON+3.8V GND GND GND GND GND CP501 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 CP3001 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 S_DET FILTER_MUTE POP_MUTE P.CON+31V AT+12V AT+12V AT+5.8V AT+5.8V AT+5.8V P.CON+3.8V P.CON+3.8V GND GND GND GND GND POWER_ON-H LIGHT_CTL INVERTER_H POWER_FAIL KEY-B KEY-A NC NC CP2803 1 CP8101 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 CP4301 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 AV3_Y GND AV3_U GND AV3_V GND AV1 R IN GND AV1 L IN GND CVBS1 GND YUV R IN GND YUV L IN GND AV1_Y GND AV1_C GND ROUT GND LOUT 2 3 4 5 6 7 8 9 10 11 12 TCK TRST_N TDO ASEBRKAK_N TMS TDI RESET_N FLASH_WP ASEMD0 GND VDD33 GND NC NC NC NC
22

CP3002 SPDIF-134 ZERO NC GND DVD_RESET D-SUB CP4303 1 2 3 NC NC 4 5 6 7 8 9 10 11 12 13 14 15 VGA-R VGA-G VGA-B NC DGND AGND AGND AGND NC DGND NC DDCD VGAHS VGAVS DDCC NC NC NC NC NC HDMI CONNECTOR CP3602 24 23 22 21 20 19 17 16 15 14 13 NC NC HOT PLUG DDC_GND DDC_SDA DDC_SCL RESERVED CEC NC NC NC NC GND START_SW TX GND P.CON+3.3V GND P.CON+6V GND 1 2 3 4 5 6 7 8 9 10 11 12 CD3002

CP8501 1 2 3 4 5 7 8 9 10 11 12 13 14 SPDIF-134 GND ZERO DVD_A_OUT_R GND DVD RESET [Y]_VIDEO [V]Y_VIDEO [U]C_VIDEO START_SW GND SSCTXD/RX SSCRXD/TX F

CP2301_1 GND Vref VCC E D C SW1(DVD/CD) VRF(RF_OUT) B A VR(DVD) VR COM VR(CD) GND LD(CD) PD/GND LD(DVD) GND NC NC T DRV T RTN F DRV F RTN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 SLOT IN DVD DRIVE DK1 CV_VTM101A OPTICAL PICK-UP

DSM2(06SD)

6 DVD_A_OUT_L

10 10 11 11 12 12 13 13 14 14 15 15 16 16

10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 SLED MOTOR LOADING MOTOR SPINDLE MOTOR

CN1
6

6 H

18 +5V_POWER

DVD_A_OUT_R 13 DVD_A_OUT_L 14 [V]Y_VIDEO [U]C_VIDEO GND RX P.CON+3.3V P.CON+12V P.CON+A5V GND(M) 15 16 17 18 19 20 21 22

CN2

NC DTV POWER ON_H 17 17 POWER_ON-H 18 18 LIGHT_CTL INVERTER_H POWER_FAIL NC NC KEY-B KEY-A 19 19 20 20 21 21 22 22 23 23

17 DTV_POWER_ON-HNC

CP8502 1 GND 2 3 4 5 6 7 8 P.CON+3.3V P.CON+3.3V P.CON+12V GND P.CON+A5V P.CON+6V GND(M)

12 TMDS_CLK11 TMDS_CLK_SH 10 TMDS_CLK+ 9 8 7 6 5 4 3 2 1 TMDS_DATA0TMDS_DATA0_SH TMDS_DATA0+ TMDS_DATA1TMDS_DATA1_SH TMDS_DATA1+ TMDS_DATA2TMDS_DATA2_SH TMDS_DATA2+ TU5801
23

23 23

23 23 24 24

CP2801 GND SCL SDA IIC_OFF D_GND 1 2 3 4 5

CN3

CP2303 SP1+ SP1SLD+ SLDLIMIT SW SW(GND) 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

NC

PC_TOOL_RX 6 PC_TOOL_TX 7 D3.3V NC NC/RESET 8 9

CN4

1 2 3 4

NC(BB) NC NC NC

CP2302 LD+ LD1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5

10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23

SUB MICON CP6201 1 2 3 4 5 6 7 8 9 10 11 GND TX MODE NC VCC CNVSS RX NC RESET GND GND NC NC

CP2804 VDD+5V/+3.3V VDD+5V/+3.3V GND GND RXO3+ RXOC+ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 LCD PANEL LVDS CD2804

GND(D) DVD MT PCB PCB130 DMG097 OPEN CLOSE

5 SIF-out

P201-2476-2 CD501

NC

7 AGC 8 V_OUT 9 +5V

RXO2+ RXO1+ RXO0+ GND RXE3+ RXEC+ RXE2+ RXE1+ RXE0+ GND

23 23

NC

11 TU 12 +30V

3
CP2201 OPERATION PCB PCB270 CEG363 GND KEY B KEY A 1 2 3 1 2 3 1 2 3 CD6202 1 2 3 GND KEY B KEY A

VDD+5V/+3.3V 16 V2801_1 GND GND RXO3RXOCRXO2RXO1RXO0GND RXE319 IF_AGC COAXIAL J4301 R H L E 20 IF_OUT1 IF_O 21 IF_OUT2
24 25

14 SDA 15 SCL

COMMAND TRANSMITTER TM101

OS7601 1 Vout 2 GND 3 B+ STAND BY/POWER D7601 G R GND AT+5V

CP7601 REMOCON IN 1 2 3 4 1 2 3 4 5 1 2 3 4 5

CD6203 1 2 3 4 5 REMOCON IN GND AT+5V STANDBY LED P.ON LED DIGITAL PCB PCBDH0 CEG360 1 7 HDMI AUDIO IN J4302 NC

16 AFT 17 +5V 18 IF_OUT

STANDBY

POWER ON LED 5 REMOCON PCB PCBDA0 CEG364

RXECRXE2RXE1RXE0-

2 6 3 2 4 5

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

:SINCE THESE CAUTION CRITICAL FORPARTS MARKED BY SAFETY,USE ONES DESCRIBED IN PARTS LIST ONLY

ARE

ETANT ATTENTION:LES PIECES REPAREES PAR UN SECURITE DANGEREUSES AN POINT DE VUE NUTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES

H-69

22LV505

H-70

WAVEFORMS
MICON
20ns 200mV 10us 100mV

AV SWITCH
2ms 100mV

13

SCALER VIDEO/AUDIO
20us 500mV

TUNER
10us 0.5V 2ms 100mV

14

FLASH
10us 0.5V 20ns 200mV

SOUND AMP
1ms 200mV

15

10us 200mV

20ns 200mV

1ms 200mV

10

16

JACK
20us 500mV 2ms 100mV

MPEG/MICON/DSP/RF_AMP
10ns 500mV

11

52

10us 100mV

2ms 100mV

100s 500mV

12

53

NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schemtic diagram.

I-1

19LV505/19LV506/22LV505

WAVEFORMS
MPEG/MICON/DSP/RF_AMP
200ns 1.0V

54

MEMORY
100s 500mV

55

AUDIO/VIDEO
200s 1.0V

56

200s 1.0V

57

10s 200mV

58

10s 100mV

59

NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schemtic diagram.

I-2

19LV505/19LV506/22LV505

MECHANICAL EXPLODED VIEW


210

103

209
103B 103C

PCB270 (OPERATION PCB ASS'Y)


103A

107

211

211

109

112 111

103D

110 208 102D 211 102E

211

102D

206 206
203 203

102A

PCB130 (DVD MT PCB ASS'Y)


208 208 105

118

102E

102B

PCBDA0 (REMOCON PCB ASS'Y)

211 208 102C

102D 102

208

208 119

208 208 114 122 207

PCB240 (POWER PCB ASS'Y)

208 120

116

113

PCBDH0 (DIGITAL PCB ASS'Y)


207 208 208
115 115

104F 205 104D


208

104E 203 204 202 203 104E 204 104D 202 204 104C 104D

208 208
121

202 204

208
117

108

104D

208 101C
201

208

208

113

101G

101E 101F
101A

104B
104A
106

104
101D

101F

101G 101

Note: Hinge Ass'y (106) is not included in Stand Ass'y (104).

101B

J1-1

19LV505

J1-2

MECHANICAL EXPLODED VIEW


208

103

209
103B 103C

PCB270 (OPERATION PCB ASS'Y)


103A

107

210

210

109

112 111

103D

110 208 102D

210

210
206 206
203 203

102E

102D

102A

PCB130 (DVD MT PCB ASS'Y)


208 208 105

118

102E

102B

PCBDA0 (REMOCON PCB ASS'Y)

102D

208

210
208 102C 102 208 119

208 208 114 122 207

PCB240 (POWER PCB ASS'Y)

208 120

116

113

PCBDH0 (DIGITAL PCB ASS'Y)


207 208 208
115 115

104F 205 104D


208

104E 203 204 202 203 104E 204 104D 202 204 104C 104D

208 208
121

202 204

208
117

108

104D

208 101C
201

208

208

113

101G

101E 101F
101A

104B
104A
106

104
101D

101F

101G 101

Note: Hinge Ass'y (106) is not included in Stand Ass'y (104).

101B 123

J1-3

19LV506

J1-4

MECHANICAL EXPLODED VIEW


210

103

209
103B 103C

PCB270 (OPERATION PCB ASS'Y)

107

211

211

103A

109

112 111

103D

110 211 208 124 211 102E 102D

102D

206 206
203 203

102A

PCB130 (DVD MT PCB ASS'Y)

118

102E

102B 208 208 105 119 208 208 114 122 207

PCBDA0 (REMOCON PCB ASS'Y)

208 211 206 102C 102 208

PCB240 (POWER PCB ASS'Y)

208 208 120 208

116

113

PCBDH0 (DIGITAL PCB ASS'Y)


207 208 208
115 115

104F 205 104D 104E 203 204 202 203 104E 204 104D 202 204 104C 104D 202 204

208 208
121

208

208
117

108

104D

208 101C 101F


201

208

208

113

101F

101E 101F
101A

104B
104A
106

104
101D 101F

101F 101F

Note: Hinge Ass'y (106) is not included in Stand Ass'y (104).


101

101B 123

J1-5

22LV505

J1-6

MECHANICAL EXPLODED VIEW (PACKING DIAGRAM)

129, 130, 131, 132, 133, 134, CD501, TM101

124

124

123

128 135

126

125

127

125

J1-7

19LV505

MECHANICAL EXPLODED VIEW (PACKING DIAGRAM)

129, 130, 131, 132, 133, 134, CD501, TM101

124

124

135

128 136

126

125

127

125

J1-8

19LV506

MECHANICAL EXPLODED VIEW (PACKING DIAGRAM)

129, 130, 131, 132, 133, 134, CD501, TM101

137

137

135

136

128

126

125

127

125

J1-9

22LV505

DVD DECK EXPLODED VIEW


600
608

601

608

CD2001 M2602
603

606 703

605 703 AA 605 703


701 602 SW2 604 704

702 702 607

Do not replace the parts. Because, minute adjustments are needed if this condition is disassembled further more. If the repair is needed, replace the DVD MECHA ASS'Y.

PCB640 (SW PCB ASS'Y) 705 CD2301

CLASS GREASE

MARK AA

NOTE: Applying positions AA for the grease are displayed for this section. Check if the correct grease is applied for each position.

J2-1

19LV505/19LV506/22LV505

MECHANICAL REPLACEMENT PARTS LIST


Location No.
101 101A 101B 101C 101D 101E 101F 101G 102 102A 102B 102C 102D 102E 103 103A 103B 103C 103D 104 104A 104B 104C 104D 104E 104F 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 201 202 203 204 205 206 207 208 209 210 211

TSB P/N
AE009568 AE009569 AE009570 AE009571 AE007694 AE009572 AE009573 AE009574 AE009575 AE009576 AE009577 AE009578 AE003026 AE007708 AE009579 AE009580 AE009581 AE009582 AE008459 AE009584 AE009585 AE009586 AE009587 AE009624 AE008947 AE007710 AE009589 AE009590 AE009591 AE009625 AE009626 AE009416 AE009594 AE009595 AE001853 AE005122 AE009597 AE009627 AE009628 AE009600 AE009601 AE009602 AE009629 AE009630 AE009605 AE009606 AE009607 AE009608 AE009603 AE009604 AE009631 AE009609 AE007451 AE007627 AE009610 AE009611 AE009632 AE003528 AE005140 AE005675 AE009612 AE007747 AE003526 AE003524 AE004849 72784031 AE009613 AE009614

Reference No.
7A708A001A 708WPDA001 702WNAA005 713WPAA280 7235490068 761WPAA177 800WQ00129 800WQ00130 7A702A529A 702WPAB205 761WSAA102 761WSA0634 800WQ0A079 800WQ00095 7A711A061A 711WPDA778 711WPEA001 735WPAB101 800WQ00105 7A704A085A 704WPAA066 761WPAA181 761WSBA014 800SRA0002 899NAGCL14 89900FB118 761WSA0628 706KSAA001 706WPA0031 8900P3545B 722549A732 723000D607 723000D784 723000D785 8965TS1017 726000A073 744WUA0029 899RFPC25V 753WUAA014 761WPAA180 761WPAA184 761WPAA187 761WPA0515 752WSA0715 791WHAA201 792WHAA246 792WHAA247 793WCDD657 794WHA0003 794WHA0004 890CCOR003 JB5ND000 J3N51617A J5S10229A J50S0101A J50S0107A 792WHAA265 8110630A0U 810A14080U 810923060U 8110K3080U 814623080U 810923080U 8109I30A0U 8109230A0U 8117540A6S 8109230A0S 8109230A4S

Description
FRONT CABI ASS'Y CABINET FRONT SHEET SPEAKER GLASS LED BADGE BRAND COVER STAND FELT SHEET 5*400*T0.3 FELT SHEET 5*250*T0.3 BACK CABI ASS'Y CABINET BACK ANGLE HINGE ANGLE BACK FELT SHEET FELT SHEET PANEL SIDE ASS'Y PANEL SIDE SLOT DVD BUTTON FRAME FELT SHEET STAND ASS'Y STAND COVER HINGE ANGLE STAND CUSHION LEG VEB1349-A CABLE CLAMP BAND ANGLE MPEG HINGE ASS'Y COVER CONNECTOR RIVET SHEET RATING MERCURY CAUTION LABEL (TOSHIBA) SHEET JACK-1 SHEET JACK-2 CUSHION 65TS10-10(17.5*20*14) SHEET CAUTION SPRING EARTH-2 HOLDER CORD SPRING EARTH-1 HOLDER REMOCON HOLDER SPEAKER-L HOLDER SPEAKER-R HOLDER PCB SHIELD IC LAMIFILM BAG 800*800*0.5MM. PACKAGE TOP PACKAGE BOTTOM GIFT BOX HANDLE HANDLE,STOPPER CLEANING CLOTH PACK POLYBAG,INSTRUCTION(RED CAUTION) REGISTRATION CARD INFORMATION SHEET(RETURN)USA INSTRUCTION BOOK QUICK SET-UP SHEET(SPANISH) PAD FOAM SCREW TAP TITE(P) BRAZIER 3*10 CH SCREW WASHER(A) M4*8 CH SCREW TAP TITE(B) BIND 3*6 CH SCREW TAP TITE(P) LAMI HEAD 3*8 CH SCREW TAP TITE(B) BIND 3*5.7+4*2.3 CH SCREW TAP TITE(B) BIND 3*8 CH SCREW TAP TITE(B) WH7 3*10 CH SCREW TAP TITE(B) BIND 3*10 CH SCREW,TAPPING(B0) TRUSS 4*16 BK SCREW TAP TITE(B) BIND 3*10 BK SCREW TAP TITE(B) BIND 3*14 BK

K1-1

19LV505

MECHANICAL REPLACEMENT PARTS LIST


Location No.
101 101A 101B 101C 101D 101E 101F 101G 102 102A 102B 102C 102D 102E 103 103A 103B 103C 103D 104 104A 104B 104C 104D 104E 104F 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 201 202 203 204 205 206 207 208 209 210

TSB P/N
AE009638 AE009639 AE009640 AE009571 AE007694 AE009684 AE009573 AE009574 AE009641 AE009642 AE009577 AE009578 AE003026 AE007708 AE009643 AE009644 AE009581 AE009645 AE008459 AE009646 AE009647 AE009648 AE009649 AE009624 AE008947 AE007710 AE009589 AE009590 AE009650 AE009625 AE009651 AE009416 AE009652 AE009653 AE001853 AE005122 AE009597 AE009627 AE009628 AE009600 AE009601 AE009602 AE009629 AE009630 AE009596 AE009606 AE009607 AE009654 AE009603 AE009604 AE009631 AE009609 AE007451 AE007627 AE009610 AE009611 AE009605 AE009632 AE003528 AE005140 AE005675 AE009612 AE007747 AE003526 AE003524 AE004849 AE004847 AE009655

Reference No.
7A708A011A 708WPDA010 702WNBA011 713WPAA280 7235490068 761WPAA196 800WQ00129 800WQ00130 7A702A557A 702WPAB222 761WSAA102 761WSA0634 800WQ0A079 800WQ00095 7A711A067A 711WPDA774 711WPEA001 735WPAB117 800WQ00105 7A704A090A 704WPAA068 761WPAA189 761WSAA103 800SRA0002 899NAGCL14 89900FB118 761WSA0628 706KSAA001 706WPA0034 8900P3545B 722549A733 723000D607 723000D807 723000D808 8965TS1017 726000A073 744WUA0029 899RFPC25V 753WUAA014 761WPAA180 761WPAA184 761WPAA187 761WPA0515 752WSA0715 723549A089 792WHAA246 792WHAA247 793WCDD692 794WHA0003 794WHA0004 890CCOR003 JB5ND000 J3N51617A J5S10229A J50S0101A J50S0107A 791WHAA201 792WHAA265 8110630A0U 810A14080U 810923060U 8110K3080U 814623080U 810923080U 8109I30A0U 8109230A0U 8117540A6U 8109230A4U

Description
FRONT CABI ASS'Y CABINET FRONT SHEET SPEAKER GLASS LED BADGE BRAND COVER STAND FELT SHEET 5*400*T0.3 FELT SHEET 5*250*T0.3 BACK CABI ASS'Y CABINET BACK ANGLE HINGE ANGLE BACK FELT SHEET FELT SHEET PANEL SIDE ASS'Y PANEL SIDE SLOT DVD BUTTON FRAME FELT SHEET STAND ASS'Y STAND COVER HINGE ANGLE STAND CUSHION LEG VEB1349-A CABLE CLAMP BAND ANGLE MPEG HINGE ASS'Y COVER CONNECTOR RIVET SHEET RATING MERCURY CAUTION LABEL (TOSHIBA) SHEET JACK-1 SHEET JACK-2 CUSHION 65TS10-10(17.5*20*14) SHEET CAUTION SPRING EARTH-2 HOLDER CORD SPRING EARTH-1 HOLDER REMOCON HOLDER SPEAKER-L HOLDER SPEAKER-R HOLDER PCB SHIELD IC POP LABEL PACKAGE TOP PACKAGE BOTTOM GIFT BOX HANDLE HANDLE,STOPPER CLEANING CLOTH PACK POLYBAG,INSTRUCTION(RED CAUTION) REGISTRATION CARD INFORMATION SHEET(RETURN)USA INSTRUCTION BOOK QUICK SET-UP SHEET(SPANISH) LAMIFILM BAG 800*800*0.5MM. PAD FOAM SCREW TAP TITE(P) BRAZIER 3*10 CH SCREW WASHER(A) M4*8 CH SCREW TAP TITE(B) BIND 3*6 CH SCREW TAP TITE(P) LAMI HEAD 3*8 CH SCREW TAP TITE(B) BIND 3*5.7+4*2.3 CH SCREW TAP TITE(B) BIND 3*8 CH SCREW TAP TITE(B) WH7 3*10 CH SCREW TAP TITE(B) BIND 3*10 CH SCREW TAPPING(B0) TRUSS 4*16 CH SCREW TAP TITE(B) BIND 3*14 CH

K1-2

19LV506

MECHANICAL REPLACEMENT PARTS LIST


Location No.
101 101A 101B 101C 101D 101E 101F 102 102A 102B 102C 102D 102E 103 103A 103B 103C 103D 104 104A 104B 104C 104D 104E 104F 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 201 202 203 204 205 206 207 208 209 210 211

TSB P/N
AE009668 AE009669 AE009670 AE009571 AE007694 AE009572 AE009671 AE009672 AE009673 AE009577 AE009578 AE003026 AE007708 AE009579 AE009580 AE009581 AE009582 AE008459 AE009584 AE009585 AE009586 AE009587 AE009624 AE008947 AE007710 AE009589 AE009590 AE009591 AE009625 AE009674 AE009416 AE009594 AE009595 AE001853 AE005122 AE009597 AE009627 AE009675 AE009600 AE009676 AE009677 AE009629 AE009630 AE009678 AE009679 AE009680 AE009681 AE009603 AE009604 AE009631 AE009609 AE007451 AE007627 AE009610 AE009611 AE009605 AE009682 AE009683 AE003528 AE005140 AE005675 AE009612 AE007747 AE003526 AE003524 AE004849 72784031 AE009613 AE009614

Reference No.
7A708A003A 708WPDA002 702WNAA006 713WPAA280 7235490068 761WPAA177 800WQ0A073 7A702A534A 702WPAB207 761WSAA102 761WSA0634 800WQ0A079 800WQ00095 7A711A061A 711WPDA778 711WPEA001 735WPAB101 800WQ00105 7A704A085A 704WPAA066 761WPAA181 761WSBA014 800SRA0002 899NAGCL14 89900FB118 761WSA0628 706KSAA001 706WPA0031 8900P3545B 722549A734 723000D607 723000D784 723000D785 8965TS1017 726000A073 744WUA0029 899RFPC25V 753WUA0097 761WPAA180 761WPAA185 761WPAA188 761WPA0515 752WSA0715 723549A091 800WQ0A119 792WHAA251 793WCDD665 794WHA0003 794WHA0004 890CCOR003 JB5ND000 J3N51617A J5S10229A J50S0101A J50S0107A 791WHAA201 792WHAA268 792WHAA250 8110630A0U 810A14080U 810923060U 8110K3080U 814623080U 810923080U 8109I30A0U 8109230A0U 8117540A6S 8109230A0S 8109230A4S

Description
FRONT CABI ASS'Y CABINET FRONT SHEET SPEAKER GLASS LED BADGE BRAND COVER STAND FELT SHEET BACK CABI ASS'Y CABINET BACK ANGLE HINGE ANGLE BACK FELT SHEET FELT SHEET PANEL SIDE ASS'Y PANEL SIDE SLOT DVD BUTTON FRAME FELT SHEET STAND ASS'Y STAND COVER HINGE ANGLE STAND CUSHION LEG VEB1349-A CABLE CLAMP BAND ANGLE MPEG HINGE ASS'Y COVER CONNECTOR RIVET SHEET RATING MERCURY CAUTION LABEL (TOSHIBA) SHEET JACK-1 SHEET JACK-2 CUSHION 65TS10-10(17.5*20*14) SHEET CAUTION SPRING EARTH-2 HOLDER CORD SPRING EARTH-1 HOLDER REMOCON HOLDER SPEAKER-L HOLDER SPEAKER-R HOLDER PCB SHIELD IC POP LABEL FELT,SHEET PACKAGE BOTTOM GIFT BOX HANDLE HANDLE,STOPPER CLEANING CLOTH PACK POLYBAG,INSTRUCTION(RED CAUTION) REGISTRATION CARD INFORMATION SHEET(RETURN)USA INSTRUCTION BOOK QUICK SET-UP SHEET(SPANISH) LAMIFILM BAG 800*800*0.5MM. PAD FOAM PACKAGE TOP SCREW TAP TITE(P) BRAZIER 3*10 CH SCREW WASHER(A) M4*8 CH SCREW TAP TITE(B) BIND 3*6 CH SCREW TAP TITE(P) LAMI HEAD 3*8 CH SCREW TAP TITE(B) BIND 3*5.7+4*2.3 CH SCREW TAP TITE(B) BIND 3*8 CH SCREW TAP TITE(B) WH7 3*10 CH SCREW TAP TITE(B) BIND 3*10 CH SCREW,TAPPING(B0) TRUSS 4*16 BK SCREW TAP TITE(B) BIND 3*10 BK SCREW TAP TITE(B) BIND 3*14 BK

K1-3

22LV505

DVD DECK REPLACEMENT PARTS LIST


Location No.
! 600 601 602 603 604 605 606 607 608 701 702 703 704 705 CD2001 CD2301 M2602 PCB640 SW2

TSB P/N
AE009615 AE008499 AE005815 AE003551 AE005805 AE008500 AE008501 AE005816 BZ710149 AE005817 AE003554 AE003555 AE005006 AE003557 AE009434 AE003558 AE009616 AE008503 AE001158

Reference No.
A50N01P650 92SBB0033A 92AAA0017A 92P100088A 92P100117A 92P200017A 92P200018A 92P100116A 800WFAA008 92P700007A 814011723U 816112080U 813381750U 811022080U 12C14O1602 122H062102 1515T98006 A5X002C640 0500101036 DVD MECHA ASS'Y LOADER SUB ASS'Y FEED RACK ASS'Y GEAR,MOTOR GEAR,MIDDLE INSULATOR, F INSULATOR, R GEAR,FEED CUSHION C

Description
A50N01P650 DLM1D29-31

SCREW,GEAR FEED SCREW,PAN M1.7*2.3 P3 CH SEMS.TAP TITE(P) PAN W10 2*8 CH SCREW,T-TITE(B)CAMERA PAN M1.7*5.0 P3 CH SCREW,TAP TITE(P) BIND 2*8 CH CORD JUMPER CORD JUMPER MOTOR SW PCB ASS'Y PUSH SWITCH FFC05241600408T1-A04 2H062102 WRF-300CA-10460A DED020A ESE22MH22

K2-1

19LV505

DVD DECK REPLACEMENT PARTS LIST


Location No.
! 600 601 602 603 604 605 606 607 608 701 702 703 704 705 CD2001 CD2301 M2602 PCB640 SW2

TSB P/N
AE009615 AE008499 AE005815 AE003551 AE005805 AE008500 AE008501 AE005816 BZ710149 AE005817 AE003554 AE003555 AE005006 AE003557 AE009434 AE003558 AE009616 AE008503 AE001158

Reference No.
A50N01P650 DVD MECHA ASS'Y

Description
A50N01P650 DLM1D29-31

92SBB0033A LOADER SUB ASS'Y 92AAA0017A FEED RACK ASS'Y 92P100088A GEAR,MOTOR 92P100117A GEAR,MIDDLE 92P200017A INSULATOR, F 92P200018A INSULATOR, R 92P100116A GEAR,FEED 800WFAA008 CUSHION C 92P700007A 814011723U 816112080U 813381750U 811022080U 12C14O1602 122H062102 1515T98006 A5X002C640 0500101036

SCREW,GEAR FEED SCREW,PAN M1.7*2.3 P3 CH SEMS.TAP TITE(P) PAN W10 2*8 CH SCREW,T-TITE(B)CAMERA PAN M1.7*5.0 P3 CH SCREW,TAP TITE(P) BIND 2*8 CH CORD JUMPER CORD JUMPER MOTOR SW PCB ASS'Y PUSH SWITCH FFC05241600408T1-A04 2H062102 WRF-300CA-10460A DED020A ESE22MH22

K2-2

19LV506

DVD DECK REPLACEMENT PARTS LIST


Location No. TSB P/N Reference No.
! 600 601 602 603 604 605 606 607 608 701 702 703 704 705 CD2001 CD2301 M2602 PCB640 SW2 AE009615 AE008499 AE005815 AE003551 AE005805 AE008500 AE008501 AE005816 BZ710149 AE005817 AE003554 AE003555 AE005006 AE003557 AE009434 AE003558 AE009616 AE008503 AE001158 A50N01P650 92SBB0033A 92AAA0017A 92P100088A 92P100117A 92P200017A 92P200018A 92P100116A 800WFAA008 92P700007A 814011723U 816112080U 813381750U 811022080U 12C14O1602 122H062102 1515T98006 A5X002C640 0500101036 DVD MECHA ASS'Y LOADER SUB ASS'Y FEED RACK ASS'Y GEAR,MOTOR GEAR,MIDDLE INSULATOR, F INSULATOR, R GEAR,FEED CUSHION C

Description
A50N01P650 DLM1D29-31

SCREW,GEAR FEED SCREW,PAN M1.7*2.3 P3 CH SEMS.TAP TITE(P) PAN W10 2*8 CH SCREW,T-TITE(B)CAMERA PAN M1.7*5.0 P3 CH SCREW,TAP TITE(P) BIND 2*8 CH CORD JUMPER CORD JUMPER MOTOR SW PCB ASS'Y PUSH SWITCH FFC05241600408T1-A04 2H062102 WRF-300CA-10460A DED020A ESE22MH22

K2-3

22LV505

ELECTRICAL REPLACEMENT PARTS LIST


Location No. TSB P/N
! R505 ! R509 ! R510 ! R512 R551 ! R3019 ! R7038 ! R7039 C502 ! C504 ! C506 ! C507 ! C508 ! C510 C511 ! C513 ! C514 C518 ! C522 ! C525 C535 C7006 C7020 C7022 C7026 C7029 C7030 C7033 D301 ! D504 D505 D506 ! D507 ! D508 D509 ! D510 ! D511 D512 ! D514 ! D515 D516 D517 ! D518 D519 D520 D521 D522 ! D523 D2303 D2304 D3002 D3003 D3004 D3005 D3006 D3007 D3401 D3402 D3403 D3601 D3602 D3607 D3611 D4002 D4003 D4005 D4008 D6205 D6209 D6212 D7002 D7003 D7004 AE009485 AE009486 AE005735 AE009487 BZ210272 AE009488 AE009489 AE009489 AE009490 AE009184 BZ110025 AD301026 BZ110035 AD301026 AE008913 BZ110172 AE009491 AE009492 AE008913 AE008913 AE009003 AE009357 AE009357 AE009357 AE009493 AE009493 AE009493 AE009493 AE008906 BZ410031 AE008372 AE008319 BZ410062 BZ410062 AE009494 BZ410062 AE008319 AE002133 BZ410126 AE009360 AE008319 BZ410058 BZ410062 AE009006 AE009006 AE009006 AE009006 AE009495 AE009006 AE009006 AE004643 AE004643 AE004643 AE009496 AE004643 AE009496 AE009006 AE009006 AE009006 AE004937 AE004937 AE009497 AE009498 AE009006 AE009006 AE009006 AE009006 AE009498 AE009006 AE009006 BZ410006 BZ410006 BZ410006

Reference No.
R63884330J RC31X1125J R63881R22J R3K781563J R00204101J R808R9333J R3K781220J R3K781220J E8E52C271D E7EYF1222M P2122B224M CD39E0M13M P2122B104M CD39E0M13M E7EYF2102M C03L0R7U2K CD39E0MQ2K P332E4223J E7EYF2102M E7EYF2102M E7EPU2101M E7EYS2471M E7EYS2471M E7EYS2471M C230SLB11J C230SLB11J C230SLB11J C230SLB11J D28R11FS20 D6CE24110A D2LT001F50 D4AT01H3E0 D2WTRM11C0 D2WTRM11C0 DE7RB3302B D2WTRM11C0 D4AT01H3E0 D2BXARS010 D2WXRU3AM0 D28A10A100 D4AT01H3E0 D97U08R21B D2WTRM11C0 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 D27A95T900 DGERMA1110 DGERMA1110 D28R1QS040 D28R1QS040 D28R1QS040 D28R11FS40 D28R1QS040 D28R11FS40 DGERMA1110 DGERMA1110 DGERMA1110 D77R1A1R10 D77R1A1R10 DDLRS160T0 DGJRT54WS0 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGJRT54WS0 DGERMA1110 DGERMA1110 D1VT001330 D1VT001330 D1VT001330

R,FUSE RC R,FUSE R,METAL OXIDE RC RC R,METAL OXIDE R,METAL OXIDE CE CE CMP CC CMP CC CE CC CC CPP CE CE CE CE CE CE CC CC CC CC

Description RESISTORS

33 OHM 1/4W 1.2M OHM 1W 0.22 OHM 1W 56K OHM 1W 100 OHM 1/4W 33K OHM 1/16W 22 OHM 1W 22 OHM 1W 270 UF 200V 2200 UF 10V 0.22 UF 275V ECQUL 0.001 UF 250V 0.1 UF 275V ECQUL 0.001 UF 250V 1000 UF 16V 680 PF 2KV R 470 PF 250V 0.022 UF 400V 1000 UF 16V 1000 UF 16V 100 UF 16V 470 UF 16V 470 UF 16V 470 UF 16V 10 PF 6KV SL 10 PF 6KV SL 10 PF 6KV SL 10 PF 6KV SL EC11FS2-TE12L ENE241D-10A-Q6 1F5-E 1H3-E RM11C-EIC RM11C-EIC UDZSNP33B TE-17 RM11C-EIC 1H3-E SARS01-V1 RU3AM-EIC FCH10A10 1H3-E MTZJ8.2B T-77 RM11C-EIC MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) RB095T-90 MA111-(TX) MA111-(TX) EC31QS04-TE12L EC31QS04-TE12L EC31QS04-TE12L EC11FS4-TE12L EC31QS04-TE12L EC11FS4-TE12L MA111-(TX) MA111-(TX) MA111-(TX) AVRL161A1R1NT AVRL161A1R1NT SS160-T BAT54WS MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) BAT54WS MA111-(TX) MA111-(TX) 1SS133T-77 1SS133T-77 1SS133T-77

CAPACITORS

DIODE DIODE VARISTA DIODE SILICON DIODE RECTIFIER DIODE SILICON DIODE SILICON DIODE ZENER DIODE SILICON DIODE RECTIFIER DIODE SILICON DIODE SILICON DIODE SCHOTTKY BARRIER DIODE RECTIFIER DIODE,ZENER DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SCHOTTKY BARRIER DIODE SILICON DIODE SILICON DIODE DIODE DIODE DIODE SCHOTTKY DIODE DIODE SCHOTTKY DIODE SILICON DIODE SILICON DIODE SILICON DIODE VARISTA DIODE VARISTA DIODE SCHOTTKY BARRIER DIODE SCHOTTKY BARRIER DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SCHOTTKY BARRIER DIODE SILICON DIODE SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON

DIODES

K3-1

19LV505

ELECTRICAL REPLACEMENT PARTS LIST


Location No. TSB P/N
D7005 D7006 D7008 D7009 D7010 D7011 D7012 D7013 D7014 D7015 D7016 D7017 D7018 D7019 D7020 D7021 D7022 D7023 D7024 D7025 D7026 D7601 D8510 ! IC301 ! IC501 ! IC502 IC503 ! IC505 ! IC2301 IC2801 IC2802 IC2804 IC2805 ! IC3001 ! IC3002 ! IC3003 ! IC3007 ! IC3009 IC3602 IC4001 IC4005 IC4007 IC5801 IC6201 IC6202 IC6551 IC6552 IC6553 IC6554 IC6555 IC6556 IC6557 IC6558 IC7001 IC7002 IC8501 ! IC8502 Q301 Q302 ! Q501 Q503 Q504 Q505 Q2301 Q2302 Q3001 Q3002 Q3003 Q3004 Q3005 Q3006 ! Q3007 Q3008 BZ410006 BZ410006 BZ410006 BZ410006 BZ410006 AE009006 AE009006 AE009006 AE009006 BZ410006 AE009006 AE009006 BZ410006 AE009006 AE009006 AE009006 AE009006 AE009006 AE009006 AE009006 AE009006 AE000288 AE009006 AE008430 AE009499 AD302211 AE009500 AE002809 AE008194 AE009656 AE009502 AE009688 AE009618 AE009505 AE008435 AE008916 AE008431 AE009506 AE009619 AE009685 AE008324 AE008437 AE004647 79097849 AE009620 AE009511 BZ611139 BZ611139 AD301988 AD301988 AE008921 BZ611139 BZ611139 AE009512 AE009513 AE009365 AE008223 BZ510108 BZ510071 72783392 79097796 AE000613 BZ510108 AE008330 AE008331 BZ510071 BZ510107 BZ510067 BZ510067 BZ510071 BZ510071 AE009621 BZ510071

Reference No.
D1VT001330 D1VT001330 D1VT001330 D1VT001330 D1VT001330 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 D1VT001330 DGERMA1110 DGERMA1110 D1VT001330 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 0021E9Q010 DGERMA1110 I03SP20520 ICAD055310 I1KJ9A431A I03F9797M0 000220002W I03FV65650 I56M069540 IGGM061600 S50T01CF05 S50S01CE01 I07F091300 I1LF010150 I0GF95ZN10 I07F078200 I5HJ0170B0 S50T01CE02 S50T01CF02 IF9J0164AG ICMJ016017 I01FF58320 I9UF032290 S34L01PM01 IC1J053580 I0QF02534V I0QF02534V I0UF015010 I0UF015010 I5CJ031570 I0QF02534V I0QF02534V I07F098820 I0CF0902D0 I0QF045650 I1TF911170 TAAA1504SY TNAAB05003 TJXG10NK50 TPATC03002 TNATC03002 TAAA1504SY TAAA1505SY TAAA1544T0 TNAAB05003 TPAAA05001 TNAAC05002 TNAAC05002 TNAAB05003 TNAAB05003 TL4A01664Y TNAAB05003 DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE,SILICON DIODE SILICON DIODE SILICON DIODE,SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON LED DIODE SILICON

Description DIODES
1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) 1SS133T-77 MA111-(TX) MA111-(TX) 1SS133T-77 MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) LTL-1BEFJ-002A MA111-(TX)

SOUND AMP 5W 2CH LOW STANDBY POWER IC CONTROL VARIABLE SHUNT REGULATOR TAPE CHARGE POMP CONTROL PHOTO COUPLER 5CH MOTOR DRIVER IC SCALER 256MB DDR2 SDRAM MEMORY DATA 32MBIT FLASH 48PIN TSOP MEMORY DATA EEPROM 256KBIT SO8 1CH DC-DC CONVERTER DC-DC CONVERTER CONTROLLER VO=0.8-3.5V I=1.5A TAPING VARIABLE REG LOW INPUT IO=1A REGULATOR VO=3.3V IO=800MA MEMORY DATA EEPROM 2K SOP8 MEMORY DATA VADDIS9 MPEG/MICON/DSP/RF-AM 1M*16*4BANK SDRAM TSOP54 16M FLASH MEMORY PB FREE USA STEREO RESET IC 2.9V TYPE MEMORY DATA FLASH MICOM ROM16K 2KX2 RAM1 A/D CONVERTER A/V SW 3INPUT 1OUTPUT A/V SW 3INPUT 1OUTPUT A/V SW 2INPUT 1OUTPUT A/V SW 2INPUT 1OUTPUT A/V SW 2INPUT 1OUTPUT A/V SW 3INPUT 1OUTPUT A/V SW 3INPUT 1OUTPUT 19WLCD INVERTER IC QUAND OPERATIONNAL AMPLIFILE DUAL OPEAMP VO=1.5-7V IO=1A TAPING TRANSISTOR SILICON COMPOUND TRANSISTOR FET COMPOUND TRANSISTOR COMPOUND TRANSISTOR TRANSISTOR SILICON TRANSISTOR SILICON TRANSISTOR SILICON COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR TRANSISTOR SILICON COMPOUND TRANSISTOR

ICS

LA42052-E FA5531P-A2 KIA431A-AT LA5797M-TE-L-E PS2561AL1-1-V(W) LA6565VR-TLM-E R8J66954BG HYB18TC256160BF-3S EN29LV320AB-70TCP M24256-BWMN6TP BD9130NV AL1015 PQ035ZN1HZPH BD7820FP-E2 S-1170B33UC-OTSTFG S-24CS02AFJ-TB-GE ZR36966ELCG-D-G M12L64164A-7TG SST39VF1601-70-4C-EKE AN5832SA-E1V PST3229NR R5F21124FP AK5358A NJM2534V(TE2) NJM2534V(TE2) MM1501XNRE MM1501XNRE SN74LVC1G3157DCKR NJM2534V(TE2) NJM2534V(TE2) BD9882FV-E2 LM2902DR NJM4565M(TE1) LM1117S-ADJ KTA1504S_Y_RTK KRC102SRTK STF10NK50Z KRA103MAT KRC103MAT KTA1504S_Y_RTK KTA1505S-Y-RTK/P KTA1544T-RTK/P KRC102SRTK KRA101SRTK KRC103SRTK KRC103SRTK KRC102SRTK KRC102SRTK KTA1664-Y(GP) KRC102SRTK

TRANSISTORS

K3-2

19LV505

ELECTRICAL REPLACEMENT PARTS LIST


Location No. TSB P/N
! Q3009 Q3010 ! Q3011 Q3402 Q3404 Q3407 Q3409 Q3410 Q3411 Q3603 Q3607 Q3608 Q3610 Q4301 Q5801 Q5802 Q5803 Q5804 Q6201 Q6202 Q6203 Q6204 Q7003 Q7004 Q7005 ! L501 L503 L504 L3001 L3002 L3003 L3004 L3005 L3603 L3604 L5801 L5805 L6561 L7001 L8501 L8502 L8504 ! T501 ! T7001 ! T7002 ! J301 ! J501 J4301 J4302 J8101 J8102 J8103 J8104 SW2201 SW2202 SW2203 SW2204 SW2205 SW2206 SW2207 SW2208 PCB130 PCB240 PCB270 PCBDA0 PCBDH0 B303 B307 B308 B501 AE009514 AE009514 AE008933 BZ510107 BZ510109 BZ510071 BZ510107 BZ510109 BZ510109 AE009515 AE009515 AE009515 BZ510109 BZ510109 AE009515 AE009515 AE009515 AE009515 AE009515 AE009515 BZ510072 BZ510071 BZ510113 AE009516 AE009516 AE005143 BZ310150 AD301785 BZ310150 AE009517 BZ310150 AE009518 BZ310150 AE009519 AE009519 72784092 AE009260 AE005284 AD301785 AE008874 AE006570 AE006570 AE009520 AE009521 AE009521 AE009522 AE009523 AE009524 AE009522 AE009526 AE009527 AE009528 AE009529 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 AE009530 AE009531 AE009532 AE009533 AE009534 AE009535 AE009535 AE009535 BZ310129

Reference No.
TJ7T35P020 TJ7T35P020 TJ5MC61080 TPAAA05001 TCAA3875SY TNAAB05003 TPAAA05001 TCAA3875SY TCAA3875SY T27T030190 T27T030190 T27T030190 TCAA3875SY TCAA3875SY T27T030190 T27T030190 T27T030190 T27T030190 T27T030190 T27T030190 TPAAC05002 TNAAB05003 T27T030180 T250A06J30 T250A06J30 029X000416 02167E220K 02167E100K 02167E220K 0218MG5R2P 02167E220K 0218MG220P 02167E220K 02D1000119 02D1000119 0216SD220J 021AS9224J 0216S8220K 02167E100K 0216SD2R2J 0216SD1R0J 0216SD1R0J 0481240018 048135109G 048135109G 060R131024 064Q1A0010 060R401140 060R131024 062R750007 060R411058 060R431039 060R431040 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 A50S01C130 A50S01C240 A50S01C270 A50S01CDA0 A50S01CDH0 024HC13914 024HC13914 024HC13914 024HT03564

Description TRANSISTORS
FET FET FET COMPOUND TRANSISTOR TRANSISTOR SILICON COMPOUND TRANSISTOR COMPOUND TRANSISTOR TRANSISTOR SILICON TRANSISTOR SILICON FET FET FET TRANSISTOR SILICON TRANSISTOR SILICON FET FET FET FET FET FET COMPOUND TRANSISTOR COMPOUND TRANSISTOR FET FET FET COIL,LINE FILTER COIL COIL COIL COIL COIL COIL COIL COIL CHOKE COIL CHOKE COIL COIL COIL COIL COIL COIL COIL TRANSFORMER,SWITCHING TRANSFORMER,SWITCHING TRANSFORMER,SWITCHING HEADPHONE JACK JACK,AC RCA JACK HEADPHONE JACK PLUG RCA JACK RCA JACK RCA JACK SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT RTQ035P02-TR RTQ035P02-TR TPC6108 KRA101SRTK KTC3875S_Y_RTK KRC102SRTK KRA101SRTK KTC3875S_Y_RTK KTC3875S_Y_RTK 2SK3019_TL 2SK3019_TL 2SK3019_TL KTC3875S_Y_RTK KTC3875S_Y_RTK 2SK3019_TL 2SK3019_TL 2SK3019_TL 2SK3019_TL 2SK3019_TL 2SK3019_TL KRA103SRTK KRC102SRTK 2SK3018T106 TK30A06J3(ORION.Q) TK30A06J3(ORION.Q) SS24H-10100 22 UH 10 UH 22 UH 5.2 UH 22 UH 22 UH 22 UH EXC28CG900U EXC28CG900U 22 UH 0.22 UH 22 UH 10 UH 2.2 UH 1 UH 1 UH 81240018 8135109G 8135109G PJ-364H CCT2302-0901C RCA-101HT(OR) PJ-364H DIN-417HA-01 RCA-341H(NI)-09 RCA-228H(3)NI-02 RCA-341H(2)NI-06 EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R DMG097A CEG362A CEG363A CEG364A CEG360A HCB3216KF-391T20 HCB3216KF-391T20 HCB3216KF-391T20 W4BRH3.5X6X1.0

COILS &TRANSFORMERS

JACKS

SWITCHES

DVD MT PCB ASS'Y POWER PCB ASS'Y OPERATION PCB ASS'Y REMOCON PCB ASS'Y DIGITAL PCB ASS'Y CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS

P.C.BOARD ASSEMBLIES

MISCELLANEOUS

K3-3

19LV505

ELECTRICAL REPLACEMENT PARTS LIST


Location No. TSB P/N
B2304 B2305 B2800 B2801 B2803 B2804 B2805 B2806 B2807 B2808 B2809 B2810 B2811 B2812 B2813 B2814 B2815 B2816 B2817 B2820 B2821 B2822 B3003 B3004 B3005 B3006 B3007 B3008 B3009 B3010 B3011 B3012 B3013 B3014 B3015 B3016 B3017 B3022 B3023 B3601 B4001 B4002 B4003 B4005 B4006 B4008 B4010 B4015 B4016 B4301 B4302 B4303 B4304 B5801 B5802 B5803 B5804 B6201 B6202 B6551 B6552 B6553 B6554 B6556 B8501 B8502 B8503 B8504 BT001 BT002 CD301 ! CD501 CP501 CD2804 CD3002 AE008552 AE008552 AE008878 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009374 AE009374 AE009374 AE009374 AE009374 AE009374 AE009374 AE009374 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008609 AE008878 AE008609 AE008609 AE008878 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008610 AE008395 AE008610 AE008610 AE008609 AE008609 AE008609 AE008610 AE008609 AE008609 AE009374 AE008609 AE008609 AE008609 AE008878 AE009374 AE008552 AE009374 AE008552 AE008217 AE008217 AE009537 AE009538 AE008882 AE009539 AE009540

Reference No.
024NC51021 024NC51021 024HC51816 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC51216 024HC51216 024HC51216 024HC51216 024HC51216 024HC51216 024HC51216 024HC51216 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51023 024HC51816 024HC51023 024HC51023 024HC51816 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024HC51513 024HC56005 024HC51513 024HC51513 024HC51023 024HC51023 024HC51023 024HC51513 024HC51023 024HC51023 024HC51216 024HC51023 024HC51023 024HC51023 024HC51816 024HC51216 024NC51021 024HC51216 024NC51021 141U004016 141U004016 06E8142401 120Q119905 06977NM020 06EA2U2503 06E82M1101

Description MISCELLANEOUS
CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS BATTERY,MANGAN BATTERY,MANGAN CORD CONNECTOR CORD SET AC CONNECTOR PCB SIDE CORD CONNECTOR CORD CONNECTOR EBMS160808A102_RDC45 EBMS160808A102_RDC45 HCB1608KF-181T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 FCM1608KF-102T02 HCB1608KF-181T20 FCM1608KF-102T02 FCM1608KF-102T02 HCB1608KF-181T20 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 FCM1608KF-151T06 FCM1608CF-600T06 FCM1608KF-151T06 FCM1608KF-151T06 FCM1608KF-102T02 FCM1608KF-102T02 FCM1608KF-102T02 FCM1608KF-151T06 FCM1608KF-102T02 FCM1608KF-102T02 HCB1608KF-121T20 FCM1608KF-102T02 FCM1608KF-102T02 FCM1608KF-102T02 HCB1608KF-181T20 HCB1608KF-121T20 EBMS160808A102_RDC45 HCB1608KF-121T20 EBMS160808A102_RDC45 MNAAA(R03) MNAAA(R03) E8142401 P201-2476-2 127301123K2 EA2U2503 E82M1101

K3-4

19LV505

ELECTRICAL REPLACEMENT PARTS LIST


Location No. TSB P/N
CD6202 CD6203 CD7005 CD7006 CP2201 CP2301 CP2302 CP2303 CP2801 CP2803 CP2804 CP3001 CP3002 CP3602 CP4301 CP4303 CP6201 CP7601 CP8101 ! CP8501 CP8502 CUS151 EL2401 ! F501 ! F7001 FH501 FH502 NR2801 NR2802 NR2803 NR2804 NR2805 NR2806 NR2807 NR2808 NR2809 NR2810 NR2811 NR2812 NR2813 NR6551 OS7601 ! SP301 ! SP302 ! TH501 TM101 ! TU5801 ! V2801 X2801 X2802 X3601 X4001 X6201 X6551 AE009541 AE009542 AE009622 AE009622 AD301795 AE008156 AE009544 AE009545 AE009546 AE009547 AE009548 AE008886 AE009549 AE009550 AE008886 AE009551 AE009552 BZ614440 AE008882 AE009553 AD301796 BZ710279 BZ614043 AD302166 AE004626 AE002634 AE002634 AE009554 AE009554 AE009554 AE009554 AE009555 AE009555 AE009555 AE009555 AE009555 AE009556 AE009556 AE009556 AE009556 AE009557 AE008414 AE009558 AE009558 AE009559 AE009560 AE009623 AE009562 AE009563 AE009564 AE009565 AE009566 75006971 AE009567

Reference No.
06CH231204 06CU251301 06E82E1201 06E82E1201 069S230639 069KYOT159 069EV5T060 069EV6T060 06GG290029 06GG2C0029 069S2U0739 06CK7N0301 069S2M0079 06GDYL3038 06CK7N0301 06G7S21501 06GG2B0029 069S250639 06977NM020 06GG2E0019 069S280629 800WFAA006 124116281A 081PC04005 083LA05007 06710T0009 06710T0009 11074100M7 11074100M7 11074100M7 11074100M7 11074270M7 11074270M7 11074270M7 11074270M7 11074270M7 11074220M7 11074220M7 11074220M7 11074220M7 11074470M7 077A033001 070Y433004 070Y433004 DSQDNE5R0L 076D0LT030 0164100027 09EA119001 100GT02728 100GT02509 100GT01807 100GT02727 100GT01615 100DT01217

CORD CONNECTOR CORD CONNECTOR CORD CONNECTOR CORD CONNECTOR CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CORD CONNECTOR CONNECTOR PCB SIDE CONNECTOR PCB SIDE CORD CONNECTOR CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CUSHION A EYE LET FUSE FUSE HOLDER,FUSE HOLDER,FUSE R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK REMOTE RECEIVER SPEAKER SPEAKER THERMISTOR TRANSMITTER DIGITAL TUNER LCD CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL

Description MISCELLANEOUS

CH231204 CU251301 E82E1201 E82E1201 A2001WR2-3P LD07T2-24ND-03 04_6232_105_015_800+ 04_6232_106_015_800+ A2001WV-9A A2001WV-12A A2006WV0-2X15P TWG-P23P-A1 A2006WV0-2X11P 1A0300030 TWG-P23P-A1 WD-00021-R A2001WV-11A A2001WR2-5P 127301123K2 A2001WR-14A A2001WV2-8P XRY16X28BD 51MS040L 1206FA5A-T EYF-52BCY EYF-52BCY CRA108100JV CRA108100JV CRA108100JV CRA108100JV CRA108270JV CRA108270JV CRA108270JV CRA108270JV CRA108270JV CRA108220JV CRA108220JV CRA108220JV CRA108220JV CRA108470JV ROM-V338TAO S0308F01 S0308F01 5D2-08LCS 000-103000530 ENG36E18KRF T190PW01_V0 SMD-49 C27000B030 SMD-49 C25000H025 SMD-49 C18432B022 SMD-49 C27000J029 B16000E007 DS0321SRAB

RESISTOR RC.................. CARBON RESISTOR CAPACITORS CC.................. CERAMIC CAPACITOR CE.................. ALUMI ELECTROLYTIC CAPACITOR CP.................. POLYESTER CAPACITOR CPP................ POLYPROPYLENE CAPACITOR CPL................ PLASTIC CAPACITOR CMP............... METAL POLYESTER CAPACITOR CMPL............. METAL PLASTIC CAPACITOR CMPP............. METAL POLYPROPYLENE CAPACITOR

K3-5

19LV505

ELECTRICAL REPLACEMENT PARTS LIST


Location No.
! R505 ! R509 ! R510 ! R512 R551 ! R3019 ! R7038 ! R7039 C502 ! C504 ! C506 ! C507 ! C508 ! C510 C511 ! C513 ! C514 C518 ! C522 ! C525 C535 C7006 C7020 C7022 C7026 C7029 C7030 C7033 D301 ! D504 D505 D506 ! D507 ! D508 D509 ! D510 ! D511 D512 ! D514 ! D515 D516 D517 ! D518 D519 D520 D521 D522 ! D523 D2303 D2304 D3002 D3003 D3004 D3005 D3006 D3007 D3401 D3402 D3403 D3601 D3602 D3607 D3611 D4002 D4003 D4005 D4008 D6205 D6209 D6212 D7002 D7003 D7004

TSB P/N
AE009485 AE009486 AE005735 AE009487 BZ210272 AE009488 AE009489 AE009489 AE009490 AE009184 BZ110025 AD301026 BZ110035 AD301026 AE008913 BZ110172 AE009491 AE009492 AE008913 AE008913 AE009003 AE009357 AE009357 AE009357 AE009493 AE009493 AE009493 AE009493 AE008906 BZ410031 AE008372 AE008319 BZ410062 BZ410062 AE009494 BZ410062 AE008319 AE002133 BZ410126 AE009360 AE008319 BZ410058 BZ410062 AE009006 AE009006 AE009006 AE009006 AE009495 AE009006 AE009006 AE004643 AE004643 AE004643 AE009496 AE004643 AE009496 AE009006 AE009006 AE009006 AE004937 AE004937 AE009497 AE009498 AE009006 AE009006 AE009006 AE009006 AE009498 AE009006 AE009006 BZ410006 BZ410006 BZ410006

Reference No.
R63884330J RC31X1125J R63881R22J R3K781563J R00204101J R808R9333J R3K781220J R3K781220J E8E52C271D E7EYF1222M P2122B224M CD39E0M13M P2122B104M CD39E0M13M E7EYF2102M C03L0R7U2K CD39E0MQ2K P332E4223J E7EYF2102M E7EYF2102M E7EPU2101M E7EYS2471M E7EYS2471M E7EYS2471M C230SLB11J C230SLB11J C230SLB11J C230SLB11J D28R11FS20 D6CE24110A D2LT001F50 D4AT01H3E0 D2WTRM11C0 D2WTRM11C0 DE7RB3302B D2WTRM11C0 D4AT01H3E0 D2BXARS010 D2WXRU3AM0 D28A10A100 D4AT01H3E0 D97U08R21B D2WTRM11C0 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 D27A95T900 DGERMA1110 DGERMA1110 D28R1QS040 D28R1QS040 D28R1QS040 D28R11FS40 D28R1QS040 D28R11FS40 DGERMA1110 DGERMA1110 DGERMA1110 D77R1A1R10 D77R1A1R10 DDLRS160T0 DGJRT54WS0 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGJRT54WS0 DGERMA1110 DGERMA1110 D1VT001330 D1VT001330 D1VT001330

R,FUSE RC R,FUSE R,METAL OXIDE RC RC R,METAL OXIDE R,METAL OXIDE CE CE CMP CC CMP CC CE CC CC CPP CE CE CE CE CE CE CC CC CC CC

Description RESISTORS

33 OHM 1/4W 1.2M OHM 1W 0.22 OHM 1W 56K OHM 1W 100 OHM 1/4W 33K OHM 1/16W 22 OHM 1W 22 OHM 1W 270 UF 200V 2200 UF 10V 0.22 UF 275V ECQUL 0.001 UF 250V 0.1 UF 275V ECQUL 0.001 UF 250V 1000 UF 16V 680 PF 2KV R 470 PF 250V 0.022 UF 400V 1000 UF 16V 1000 UF 16V 100 UF 16V 470 UF 16V 470 UF 16V 470 UF 16V 10 PF 6KV SL 10 PF 6KV SL 10 PF 6KV SL 10 PF 6KV SL EC11FS2-TE12L ENE241D-10A-Q6 1F5-E 1H3-E RM11C-EIC RM11C-EIC UDZSNP33B TE-17 RM11C-EIC 1H3-E SARS01-V1 RU3AM-EIC FCH10A10 1H3-E MTZJ8.2B T-77 RM11C-EIC MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) RB095T-90 MA111-(TX) MA111-(TX) EC31QS04-TE12L EC31QS04-TE12L EC31QS04-TE12L EC11FS4-TE12L EC31QS04-TE12L EC11FS4-TE12L MA111-(TX) MA111-(TX) MA111-(TX) AVRL161A1R1NT AVRL161A1R1NT SS160-T BAT54WS MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) BAT54WS MA111-(TX) MA111-(TX) 1SS133T-77 1SS133T-77 1SS133T-77

CAPACITORS

DIODE DIODE VARISTA DIODE SILICON DIODE RECTIFIER DIODE SILICON DIODE SILICON DIODE ZENER DIODE SILICON DIODE RECTIFIER DIODE SILICON DIODE SILICON DIODE SCHOTTKY BARRIER DIODE RECTIFIER DIODE,ZENER DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SCHOTTKY BARRIER DIODE SILICON DIODE SILICON DIODE DIODE DIODE DIODE SCHOTTKY DIODE DIODE SCHOTTKY DIODE SILICON DIODE SILICON DIODE SILICON DIODE VARISTA DIODE VARISTA DIODE SCHOTTKY BARRIER DIODE SCHOTTKY BARRIER DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SCHOTTKY BARRIER DIODE SILICON DIODE SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON

DIODES

K3-6

19LV506

ELECTRICAL REPLACEMENT PARTS LIST


Location No.
D7005 D7006 D7008 D7009 D7010 D7011 D7012 D7013 D7014 D7015 D7016 D7017 D7018 D7019 D7020 D7021 D7022 D7023 D7024 D7025 D7026 D7601 D8510 ! IC301 ! IC501 ! IC502 IC503 ! IC505 ! IC2301 IC2801 IC2802 IC2804 IC2805 ! IC3001 ! IC3002 ! IC3003 ! IC3007 ! IC3009 IC3602 IC4001 IC4005 IC4007 IC5801 IC6201 IC6202 IC6551 IC6552 IC6553 IC6554 IC6555 IC6556 IC6557 IC6558 IC7001 IC7002 IC8501 ! IC8502 Q301 Q302 ! Q501 Q503 Q504 Q505 Q2301 Q2302 Q3001 Q3002 Q3003 Q3004 Q3005 Q3006 ! Q3007 Q3008

TSB P/N
BZ410006 BZ410006 BZ410006 BZ410006 BZ410006 AE009006 AE009006 AE009006 AE009006 BZ410006 AE009006 AE009006 BZ410006 AE009006 AE009006 AE009006 AE009006 AE009006 AE009006 AE009006 AE009006 AE000288 AE009006 AE008430 AE009499 AD302211 AE009500 AE002809 AE008194 AE009656 AE009502 AE009688 AE009618 AE009505 AE008435 AE008916 AE008431 AE009506 AE009619 AE009685 AE008324 AE008437 AE004647 79097849 AE009620 AE009511 BZ611139 BZ611139 AD301988 AD301988 AE008921 BZ611139 BZ611139 AE009512 AE009513 AE009365 AE008223 BZ510108 BZ510071 72783392 79097796 AE000613 BZ510108 AE008330 AE008331 BZ510071 BZ510107 BZ510067 BZ510067 BZ510071 BZ510071 AE009621 BZ510071

Reference No.
D1VT001330 D1VT001330 D1VT001330 D1VT001330 D1VT001330 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 D1VT001330 DGERMA1110 DGERMA1110 D1VT001330 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 0021E9Q010 DGERMA1110 I03SP20520 ICAD055310 I1KJ9A431A I03F9797M0 000220002W I03FV65650 I56M069540 IGGM061600 S50T01CF05 S50S01CE01 I07F091300 I1LF010150 I0GF95ZN10 I07F078200 I5HJ0170B0 S50T01CE02 S50T01CF02 IF9J0164AG ICMJ016017 I01FF58320 I9UF032290 S34L01PM01 IC1J053580 I0QF02534V I0QF02534V I0UF015010 I0UF015010 I5CJ031570 I0QF02534V I0QF02534V I07F098820 I0CF0902D0 I0QF045650 I1TF911170 TAAA1504SY TNAAB05003 TJXG10NK50 TPATC03002 TNATC03002 TAAA1504SY TAAA1505SY TAAA1544T0 TNAAB05003 TPAAA05001 TNAAC05002 TNAAC05002 TNAAB05003 TNAAB05003 TL4A01664Y TNAAB05003

Description DIODES
DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE,SILICON DIODE SILICON DIODE SILICON DIODE,SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON LED DIODE SILICON SOUND AMP 5W 2CH LOW STANDBY POWER IC CONTROL VARIABLE SHUNT REGULATOR TAPE CHARGE POMP CONTROL PHOTO COUPLER 5CH MOTOR DRIVER IC SCALER 256MB DDR2 SDRAM MEMORY DATA 32MBIT FLASH 48PIN TSOP MEMORY DATA EEPROM 256KBIT SO8 1CH DC-DC CONVERTER DC-DC CONVERTER CONTROLLER VO=0.8-3.5V I=1.5A TAPING VARIABLE REG LOW INPUT IO=1A REGULATOR VO=3.3V IO=800MA MEMORY DATA EEPROM 2K SOP8 MEMORY DATA VADDIS9 MPEG/MICON/DSP/RF-AM 1M*16*4BANK SDRAM TSOP54 16M FLASH MEMORY PB FREE USA STEREO RESET IC 2.9V TYPE MEMORY DATA FLASH MICOM ROM16K 2KX2 RAM1 A/D CONVERTER A/V SW 3INPUT 1OUTPUT A/V SW 3INPUT 1OUTPUT A/V SW 2INPUT 1OUTPUT A/V SW 2INPUT 1OUTPUT A/V SW 2INPUT 1OUTPUT A/V SW 3INPUT 1OUTPUT A/V SW 3INPUT 1OUTPUT 19WLCD INVERTER IC QUAND OPERATIONNAL AMPLIFILE DUAL OPEAMP VO=1.5-7V IO=1A TAPING TRANSISTOR SILICON COMPOUND TRANSISTOR FET COMPOUND TRANSISTOR COMPOUND TRANSISTOR TRANSISTOR SILICON TRANSISTOR SILICON TRANSISTOR SILICON COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR TRANSISTOR SILICON COMPOUND TRANSISTOR 1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) 1SS133T-77 MA111-(TX) MA111-(TX) 1SS133T-77 MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) LTL-1BEFJ-002A MA111-(TX)

ICS

LA42052-E FA5531P-A2 KIA431A-AT LA5797M-TE-L-E PS2561AL1-1-V(W) LA6565VR-TLM-E R8J66954BG HYB18TC256160BF-3S EN29LV320AB-70TCP M24256-BWMN6TP BD9130NV AL1015 PQ035ZN1HZPH BD7820FP-E2 S-1170B33UC-OTSTFG S-24CS02AFJ-TB-GE ZR36966ELCG-D-G M12L64164A-7TG SST39VF1601-70-4C-EKE AN5832SA-E1V PST3229NR R5F21124FP AK5358A NJM2534V(TE2) NJM2534V(TE2) MM1501XNRE MM1501XNRE SN74LVC1G3157DCKR NJM2534V(TE2) NJM2534V(TE2) BD9882FV-E2 LM2902DR NJM4565M(TE1) LM1117S-ADJ KTA1504S_Y_RTK KRC102SRTK STF10NK50Z KRA103MAT KRC103MAT KTA1504S_Y_RTK KTA1505S-Y-RTK/P KTA1544T-RTK/P KRC102SRTK KRA101SRTK KRC103SRTK KRC103SRTK KRC102SRTK KRC102SRTK KTA1664-Y(GP) KRC102SRTK

TRANSISTORS

K3-7

19LV506

ELECTRICAL REPLACEMENT PARTS LIST


Location No.
! Q3009 Q3010 ! Q3011 Q3402 Q3404 Q3407 Q3409 Q3410 Q3411 Q3603 Q3607 Q3608 Q3610 Q4301 Q5801 Q5802 Q5803 Q5804 Q6201 Q6202 Q6203 Q6204 Q7003 Q7004 Q7005 ! L501 L503 L504 L3001 L3002 L3003 L3004 L3005 L3603 L3604 L5801 L5805 L6561 L7001 L8501 L8502 L8504 ! T501 ! T7001 ! T7002 ! J301 ! J501 J4301 J4302 J8101 J8102 J8103 J8104 SW2201 SW2202 SW2203 SW2204 SW2205 SW2206 SW2207 SW2208 PCB130 PCB240 PCB270 PCBDA0 PCBDH0 B303 B307 B308 B501

TSB P/N
AE009514 AE009514 AE008933 BZ510107 BZ510109 BZ510071 BZ510107 BZ510109 BZ510109 AE009515 AE009515 AE009515 BZ510109 BZ510109 AE009515 AE009515 AE009515 AE009515 AE009515 AE009515 BZ510072 BZ510071 BZ510113 AE009516 AE009516 AE005143 BZ310150 AD301785 BZ310150 AE009517 BZ310150 AE009518 BZ310150 AE009519 AE009519 72784092 AE009260 AE005284 AD301785 AE008874 AE006570 AE006570 AE009520 AE009521 AE009521 AE009522 AE009523 AE009524 AE009522 AE009526 AE009527 AE009528 AE009529 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 AE009530 AE009531 AE009532 AE009533 AE009534 AE009535 AE009535 AE009535 BZ310129

Reference No.
TJ7T35P020 TJ7T35P020 TJ5MC61080 TPAAA05001 TCAA3875SY TNAAB05003 TPAAA05001 TCAA3875SY TCAA3875SY T27T030190 T27T030190 T27T030190 TCAA3875SY TCAA3875SY T27T030190 T27T030190 T27T030190 T27T030190 T27T030190 T27T030190 TPAAC05002 TNAAB05003 T27T030180 T250A06J30 T250A06J30 029X000416 02167E220K 02167E100K 02167E220K 0218MG5R2P 02167E220K 0218MG220P 02167E220K 02D1000119 02D1000119 0216SD220J 021AS9224J 0216S8220K 02167E100K 0216SD2R2J 0216SD1R0J 0216SD1R0J 0481240018 048135109G 048135109G 060R131024 064Q1A0010 060R401140 060R131024 062R750007 060R411058 060R431039 060R431040 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 A50S01C130 A50S01C240 A50S01C270 A50S01CDA0 A50S01CDH0 024HC13914 024HC13914 024HC13914 024HT03564

Description TRANSISTORS
FET FET FET COMPOUND TRANSISTOR TRANSISTOR SILICON COMPOUND TRANSISTOR COMPOUND TRANSISTOR TRANSISTOR SILICON TRANSISTOR SILICON FET FET FET TRANSISTOR SILICON TRANSISTOR SILICON FET FET FET FET FET FET COMPOUND TRANSISTOR COMPOUND TRANSISTOR FET FET FET COIL,LINE FILTER COIL COIL COIL COIL COIL COIL COIL COIL CHOKE COIL CHOKE COIL COIL COIL COIL COIL COIL COIL TRANSFORMER,SWITCHING TRANSFORMER,SWITCHING TRANSFORMER,SWITCHING HEADPHONE JACK JACK,AC RCA JACK HEADPHONE JACK PLUG RCA JACK RCA JACK RCA JACK SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT RTQ035P02-TR RTQ035P02-TR TPC6108 KRA101SRTK KTC3875S_Y_RTK KRC102SRTK KRA101SRTK KTC3875S_Y_RTK KTC3875S_Y_RTK 2SK3019_TL 2SK3019_TL 2SK3019_TL KTC3875S_Y_RTK KTC3875S_Y_RTK 2SK3019_TL 2SK3019_TL 2SK3019_TL 2SK3019_TL 2SK3019_TL 2SK3019_TL KRA103SRTK KRC102SRTK 2SK3018T106 TK30A06J3(ORION.Q) TK30A06J3(ORION.Q) SS24H-10100 22 UH 10 UH 22 UH 5.2 UH 22 UH 22 UH 22 UH EXC28CG900U EXC28CG900U 22 UH 0.22 UH 22 UH 10 UH 2.2 UH 1 UH 1 UH 81240018 8135109G 8135109G PJ-364H CCT2302-0901C RCA-101HT(OR) PJ-364H DIN-417HA-01 RCA-341H(NI)-09 RCA-228H(3)NI-02 RCA-341H(2)NI-06 EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R DMG097A CEG362A CEG363A CEG364A CEG360A HCB3216KF-391T20 HCB3216KF-391T20 HCB3216KF-391T20 W4BRH3.5X6X1.0

COILS &TRANSFORMERS

JACKS

SWITCHES

DVD MT PCB ASS'Y POWER PCB ASS'Y OPERATION PCB ASS'Y REMOCON PCB ASS'Y DIGITAL PCB ASS'Y CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS

P.C.BOARD ASSEMBLIES

MISCELLANEOUS

K3-8

19LV506

ELECTRICAL REPLACEMENT PARTS LIST


Location No.
B2304 B2305 B2800 B2801 B2803 B2804 B2805 B2806 B2807 B2808 B2809 B2810 B2811 B2812 B2813 B2814 B2815 B2816 B2817 B2820 B2821 B2822 B3003 B3004 B3005 B3006 B3007 B3008 B3009 B3010 B3011 B3012 B3013 B3014 B3015 B3016 B3017 B3022 B3023 B3601 B4001 B4002 B4003 B4005 B4006 B4008 B4010 B4015 B4016 B4301 B4302 B4303 B4304 B5801 B5802 B5803 B5804 B6201 B6202 B6551 B6552 B6553 B6554 B6556 B8501 B8502 B8503 B8504 BT001 BT002 CD301 ! CD501 CP501 CD2804 CD3002

TSB P/N
AE008552 AE008552 AE008878 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009374 AE009374 AE009374 AE009374 AE009374 AE009374 AE009374 AE009374 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008878 AE008609 AE008878 AE008609 AE008609 AE008878 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008610 AE008395 AE008610 AE008610 AE008609 AE008609 AE008609 AE008610 AE008609 AE008609 AE009374 AE008609 AE008609 AE008609 AE008878 AE009374 AE008552 AE009374 AE008552 AE008217 AE008217 AE009537 AE009636 AE008882 AE009539 AE009540

Reference No.
024NC51021 024NC51021 024HC51816 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC51216 024HC51216 024HC51216 024HC51216 024HC51216 024HC51216 024HC51216 024HC51216 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51816 024HC51023 024HC51816 024HC51023 024HC51023 024HC51816 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024HC51513 024HC56005 024HC51513 024HC51513 024HC51023 024HC51023 024HC51023 024HC51513 024HC51023 024HC51023 024HC51216 024HC51023 024HC51023 024HC51023 024HC51816 024HC51216 024NC51021 024HC51216 024NC51021 141U004016 141U004016 06E8142401 120Q119907 06977NM020 06EA2U2503 06E82M1101

Description MISCELLANEOUS
CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS BATTERY,MANGAN BATTERY,MANGAN CORD CONNECTOR CORD SET AC CONNECTOR PCB SIDE CORD CONNECTOR CORD CONNECTOR EBMS160808A102_RDC45 EBMS160808A102_RDC45 HCB1608KF-181T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-121T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 HCB1608KF-181T20 FCM1608KF-102T02 HCB1608KF-181T20 FCM1608KF-102T02 FCM1608KF-102T02 HCB1608KF-181T20 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 FCM1608KF-151T06 FCM1608CF-600T06 FCM1608KF-151T06 FCM1608KF-151T06 FCM1608KF-102T02 FCM1608KF-102T02 FCM1608KF-102T02 FCM1608KF-151T06 FCM1608KF-102T02 FCM1608KF-102T02 HCB1608KF-121T20 FCM1608KF-102T02 FCM1608KF-102T02 FCM1608KF-102T02 HCB1608KF-181T20 HCB1608KF-121T20 EBMS160808A102_RDC45 HCB1608KF-121T20 EBMS160808A102_RDC45 MNAAA(R03) MNAAA(R03) E8142401 P201-2751-1 127301123K2 EA2U2503 E82M1101

K3-9

19LV506

ELECTRICAL REPLACEMENT PARTS LIST


Location No.
CD6202 CD6203 CD7005 CD7006 CP2201 CP2301 CP2302 CP2303 CP2801 CP2803 CP2804 CP3001 CP3002 CP3602 CP4301 CP4303 CP6201 CP7601 CP8101 ! CP8501 CP8502 CUS151 EL2401 ! F501 ! F7001 FH501 FH502 NR2801 NR2802 NR2803 NR2804 NR2805 NR2806 NR2807 NR2808 NR2809 NR2810 NR2811 NR2812 NR2813 NR6551 OS7601 ! SP301 ! SP302 ! TH501 TM101 ! TU5801 ! V2801 X2801 X2802 X3601 X4001 X6201 X6551

TSB P/N
AE009541 AE009542 AE009622 AE009622 AD301795 AE008156 AE009544 AE009545 AE009546 AE009547 AE009548 AE008886 AE009549 AE009550 AE008886 AE009551 AE009552 BZ614440 AE008882 AE009553 AD301796 BZ710279 BZ614043 AD302166 AE004626 AE002634 AE002634 AE009554 AE009554 AE009554 AE009554 AE009555 AE009555 AE009555 AE009555 AE009555 AE009556 AE009556 AE009556 AE009556 AE009557 AE008414 AE009558 AE009558 AE009559 AE009657 AE009623 AE009562 AE009563 AE009564 AE009565 AE009566 75006971 AE009567

Reference No.
06CH231204 06CU251301 06E82E1201 06E82E1201 069S230639 069KYOT159 069EV5T060 069EV6T060 06GG290029 06GG2C0029 069S2U0739 06CK7N0301 069S2M0079 06GDYL3038 06CK7N0301 06G7S21501 06GG2B0029 069S250639 06977NM020 06GG2E0019 069S280629 800WFAA006 124116281A 081PC04005 083LA05007 06710T0009 06710T0009 11074100M7 11074100M7 11074100M7 11074100M7 11074270M7 11074270M7 11074270M7 11074270M7 11074270M7 11074220M7 11074220M7 11074220M7 11074220M7 11074470M7 077A033001 070Y433004 070Y433004 DSQDNE5R0L 076D0LT040 0164100027 09EA119001 100GT02728 100GT02509 100GT01807 100GT02727 100GT01615 100DT01217

CORD CONNECTOR CORD CONNECTOR CORD CONNECTOR CORD CONNECTOR CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CORD CONNECTOR CONNECTOR PCB SIDE CONNECTOR PCB SIDE CORD CONNECTOR CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CUSHION A EYE LET FUSE FUSE HOLDER,FUSE HOLDER,FUSE R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK REMOTE RECEIVER SPEAKER SPEAKER THERMISTOR TRANSMITTER DIGITAL TUNER LCD CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL

Description MISCELLANEOUS

CH231204 CU251301 E82E1201 E82E1201 A2001WR2-3P LD07T2-24ND-03 04_6232_105_015_800+ 04_6232_106_015_800+ A2001WV-9A A2001WV-12A A2006WV0-2X15P TWG-P23P-A1 A2006WV0-2X11P 1A0300030 TWG-P23P-A1 WD-00021-R A2001WV-11A A2001WR2-5P 127301123K2 A2001WR-14A A2001WV2-8P XRY16X28BD 51MS040L 1206FA5A-T EYF-52BCY EYF-52BCY CRA108100JV CRA108100JV CRA108100JV CRA108100JV CRA108270JV CRA108270JV CRA108270JV CRA108270JV CRA108270JV CRA108220JV CRA108220JV CRA108220JV CRA108220JV CRA108470JV ROM-V338TAO S0308F01 S0308F01 5D2-08LCS 000-103000540 ENG36E18KRF T190PW01_V0 SMD-49 C27000B030 SMD-49 C25000H025 SMD-49 C18432B022 SMD-49 C27000J029 B16000E007 DS0321SRAB

RESISTOR RC................... CARBON RESISTOR CAPACITORS CC................... CERAMIC CAPACITOR CE................... ALUMI ELECTROLYTIC CAPACITOR CP................... POLYESTER CAPACITOR CPP.................POLYPROPYLENE CAPACITOR CPL................. PLASTIC CAPACITOR CMP................ METAL POLYESTER CAPACITOR CMPL.............. METAL PLASTIC CAPACITOR CMPP..............METAL POLYPROPYLENE CAPACITOR

K3-10

19LV506

ELECTRICAL REPLACEMENT PARTS LIST


Location No.
! R505 ! R509 ! R510 ! R512 R551 ! R3019 ! R7038 ! R7039 C502 ! C504 ! C506 ! C507 ! C508 ! C510 C511 ! C513 ! C514 C518 ! C522 ! C525 C535 C7006 C7020 C7022 C7026 C7029 C7030 C7033 D301 ! D504 D505 D506 ! D507 ! D508 D509 ! D510 ! D511 D512 ! D514 ! D515 D516 D517 ! D518 D519 D520 D521 D522 ! D523 D2303 D2304 D3002 D3003 D3004 D3005 D3006 D3007 D3401 D3402 D3403 D3601 D3602 D3607 D3611 D4002 D4003 D4005 D4008 D6205 D6209 D6212 D7001 D7002 D7003

TSB P/N
AE009485 AE009486 AE005735 AE009487 BZ210272 AE009488 AE009489 AE009489 AE009490 AE009184 BZ110025 AD301026 BZ110035 AD301026 AE008913 BZ110176 AE009491 AE009492 AE008913 AE008913 AE009003 AE009357 AE009357 AE009357 AE009493 AE009493 AE009493 AE009493 AE008906 BZ410031 AE008372 AE008319 BZ410062 BZ410062 AE009494 BZ410062 AE008319 AE002133 BZ410126 AE009495 AE008319 BZ410058 BZ410062 AE009006 AE009006 AE009006 AE009006 AE009495 AE009006 AE009006 AE004643 AE004643 AE004643 AE009496 AE004643 AE009496 AE009006 AE009006 AE009006 AE004937 AE004937 AE009497 AE009498 AE009006 AE009006 AE009006 AE009006 AE009498 AE009006 AE009006 BZ410006 BZ410006 BZ410006

Reference No.
R63884330J RC31X1125J R63881R22J R3K781563J R00204101J R808R9333J R3K781220J R3K781220J E8E52C271D E7EYF1222M P2122B224M CD39E0M13M P2122B104M CD39E0M13M E7EYF2102M C03L0R7Q2K CD39E0MQ2K P332E4223J E7EYF2102M E7EYF2102M E7EPU2101M E7EYS2471M E7EYS2471M E7EYS2471M C230SLB11J C230SLB11J C230SLB11J C230SLB11J D28R11FS20 D6CE24110A D2LT001F50 D4AT01H3E0 D2WTRM11C0 D2WTRM11C0 DE7RB3302B D2WTRM11C0 D4AT01H3E0 D2BXARS010 D2WXRU3AM0 D27A95T900 D4AT01H3E0 D97U08R21B D2WTRM11C0 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 D27A95T900 DGERMA1110 DGERMA1110 D28R1QS040 D28R1QS040 D28R1QS040 D28R11FS40 D28R1QS040 D28R11FS40 DGERMA1110 DGERMA1110 DGERMA1110 D77R1A1R10 D77R1A1R10 DDLRS160T0 DGJRT54WS0 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGJRT54WS0 DGERMA1110 DGERMA1110 D1VT001330 D1VT001330 D1VT001330

R,FUSE RC R,FUSE R,METAL OXIDE RC RC R,METAL OXIDE R,METAL OXIDE CE CE CMP CC CMP CC CE CC CC CPP CE CE CE CE CE CE CC CC CC CC

Description RESISTORS

33 OHM 1/4W 1.2M OHM 1W 0.22 OHM 1W 56K OHM 1W 100 OHM 1/4W 33K OHM 1/16W 22 OHM 1W 22 OHM 1W 270 UF 200V 2200 UF 10V 0.22 UF 275V ECQUL 0.001 UF 250V 0.1 UF 275V ECQUL 0.001 UF 250V 1000 UF 16V 470 PF 2KV R 470 PF 250V 0.022 UF 400V 1000 UF 16V 1000 UF 16V 100 UF 16V 470 UF 16V 470 UF 16V 470 UF 16V 10 PF 6KV SL 10 PF 6KV SL 10 PF 6KV SL 10 PF 6KV SL EC11FS2-TE12L ENE241D-10A-Q6 1F5-E 1H3-E RM11C-EIC RM11C-EIC UDZSNP33B TE-17 RM11C-EIC 1H3-E SARS01-V1 RU3AM-EIC RB095T-90 1H3-E MTZJ8.2B T-77 RM11C-EIC MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) RB095T-90 MA111-(TX) MA111-(TX) EC31QS04-TE12L EC31QS04-TE12L EC31QS04-TE12L EC11FS4-TE12L EC31QS04-TE12L EC11FS4-TE12L MA111-(TX) MA111-(TX) MA111-(TX) AVRL161A1R1NT AVRL161A1R1NT SS160-T BAT54WS MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) BAT54WS MA111-(TX) MA111-(TX) 1SS133T-77 1SS133T-77 1SS133T-77

CAPACITORS

DIODE DIODE VARISTA DIODE SILICON DIODE RECTIFIER DIODE SILICON DIODE SILICON DIODE ZENER DIODE SILICON DIODE RECTIFIER DIODE SILICON DIODE SILICON DIODE SCHOTTKY BARRIER DIODE RECTIFIER DIODE,ZENER DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SCHOTTKY BARRIER DIODE SILICON DIODE SILICON DIODE DIODE DIODE DIODE SCHOTTKY DIODE DIODE SCHOTTKY DIODE SILICON DIODE SILICON DIODE SILICON DIODE VARISTA DIODE VARISTA DIODE SCHOTTKY BARRIER DIODE SCHOTTKY BARRIER DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SCHOTTKY BARRIER DIODE SILICON DIODE SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON

DIODES

K3-11

22LV505

ELECTRICAL REPLACEMENT PARTS LIST


Location No.
D7004 D7005 D7006 D7007 D7008 D7009 D7010 D7011 D7012 D7013 D7014 D7015 D7016 D7017 D7018 D7019 D7020 D7021 D7022 D7023 D7024 D7025 D7026 D7601 D8510 ! IC301 ! IC501 ! IC502 IC503 ! IC505 ! IC2301 IC2801 IC2802 IC2804 IC2805 ! IC3001 ! IC3002 ! IC3003 ! IC3007 ! IC3009 IC3602 IC4001 IC4005 IC4007 IC5801 IC6201 IC6202 IC6551 IC6552 IC6553 IC6554 IC6555 IC6556 IC6557 IC6558 IC7001 IC7002 IC8501 ! IC8502 Q301 Q302 ! Q501 Q503 Q504 Q505 Q2301 Q2302 Q3001 Q3002 Q3003 Q3004 Q3005 Q3006

TSB P/N
BZ410006 BZ410006 BZ410006 BZ410006 BZ410006 BZ410006 BZ410006 AE009006 AE009006 AE009006 AE009006 BZ410006 AE009006 AE009006 BZ410006 AE009006 AE009006 AE009006 AE009006 AE009006 AE009006 AE009006 AE009006 AE000288 AE009006 AE008430 AE009499 AD302211 AE009500 AE002809 AE008194 AE009656 AE009502 AE009688 AE009659 AE009505 AE008435 AE008916 AE008431 AE009506 AE009619 AE009685 AE008324 AE008437 AE004647 79097849 AE009620 AE009511 BZ611139 BZ611139 AD301988 AD301988 AE008921 BZ611139 BZ611139 AE009512 AE009513 AE009365 AE008223 BZ510108 BZ510071 72783392 79097796 AE000613 BZ510108 AE008330 AE008331 BZ510071 BZ510107 BZ510067 BZ510067 BZ510071 BZ510071

Reference No.
D1VT001330 D1VT001330 D1VT001330 D1VT001330 D1VT001330 D1VT001330 D1VT001330 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 D1VT001330 DGERMA1110 DGERMA1110 D1VT001330 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 DGERMA1110 0021E9Q010 DGERMA1110 I03SP20520 ICAD055310 I1KJ9A431A I03F9797M0 000220002W I03FV65650 I56M069540 IGGM061600 S50T01CF05 S50T01CE01 I07F091300 I1LF010150 I0GF95ZN10 I07F078200 I5HJ0170B0 S50T01CE02 S50T01CF02 IF9J0164AG ICMJ016017 I01FF58320 I9UF032290 S34L01PM01 IC1J053580 I0QF02534V I0QF02534V I0UF015010 I0UF015010 I5CJ031570 I0QF02534V I0QF02534V I07F098820 I0CF0902D0 I0QF045650 I1TF911170 TAAA1504SY TNAAB05003 TJXG10NK50 TPATC03002 TNATC03002 TAAA1504SY TAAA1505SY TAAA1544T0 TNAAB05003 TPAAA05001 TNAAC05002 TNAAC05002 TNAAB05003 TNAAB05003 DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE,SILICON DIODE SILICON DIODE SILICON DIODE,SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON DIODE SILICON LED DIODE SILICON

Description DIODES
1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) 1SS133T-77 MA111-(TX) MA111-(TX) 1SS133T-77 MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) MA111-(TX) LTL-1BEFJ-002A MA111-(TX)

SOUND AMP 5W 2CH LOW STANDBY POWER IC CONTROL VARIABLE SHUNT REGULATOR TAPE CHARGE POMP CONTROL PHOTO COUPLER 5CH MOTOR DRIVER IC SCALER 256MB DDR2 SDRAM MEMORY DATA 32MBIT FLASH 48PIN TSOP MEMORY DATA EEPROM 256KBIT SO8 1CH DC-DC CONVERTER DC-DC CONVERTER CONTROLLER VO=0.8-3.5V I=1.5A TAPING VARIABLE REG LOW INPUT IO=1A REGULATOR VO=3.3V IO=800MA MEMORY DATA EEPROM 2K SOP8 MEMORY DATA VADDIS9 MPEG/MICON/DSP/RF-AM 1M*16*4BANK SDRAM TSOP54 16M FLASH MEMORY PB FREE USA STEREO RESET IC 2.9V TYPE MEMORY DATA FLASH MICOM ROM16K 2KX2 RAM1 A/D CONVERTER A/V SW 3INPUT 1OUTPUT A/V SW 3INPUT 1OUTPUT A/V SW 2INPUT 1OUTPUT A/V SW 2INPUT 1OUTPUT A/V SW 2INPUT 1OUTPUT A/V SW 3INPUT 1OUTPUT A/V SW 3INPUT 1OUTPUT 19WLCD INVERTER IC QUAND OPERATIONNAL AMPLIFILE DUAL OPEAMP VO=1.5-7V IO=1A TAPING TRANSISTOR SILICON COMPOUND TRANSISTOR FET COMPOUND TRANSISTOR COMPOUND TRANSISTOR TRANSISTOR SILICON TRANSISTOR SILICON TRANSISTOR SILICON COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR COMPOUND TRANSISTOR

ICS

LA42052-E FA5531P-A2 KIA431A-AT LA5797M-TE-L-E PS2561AL1-1-V(W) LA6565VR-TLM-E R8J66954BG HYB18TC256160BF-3S EN29LV320AB-70TCP M24256-BWMN6TP BD9130NV AL1015 PQ035ZN1HZPH BD7820FP-E2 S-1170B33UC-OTSTFG S-24CS02AFJ-TB-GE ZR36966ELCG-D-G M12L64164A-7TG SST39VF1601-70-4C-EKE AN5832SA-E1V PST3229NR R5F21124FP AK5358A NJM2534V(TE2) NJM2534V(TE2) MM1501XNRE MM1501XNRE SN74LVC1G3157DCKR NJM2534V(TE2) NJM2534V(TE2) BD9882FV-E2 LM2902DR NJM4565M(TE1) LM1117S-ADJ KTA1504S_Y_RTK KRC102SRTK STF10NK50Z KRA103MAT KRC103MAT KTA1504S_Y_RTK KTA1505S-Y-RTK/P KTA1544T-RTK/P KRC102SRTK KRA101SRTK KRC103SRTK KRC103SRTK KRC102SRTK KRC102SRTK

TRANSISTORS

K3-12

22LV505

ELECTRICAL REPLACEMENT PARTS LIST


Location No.
! Q3007 Q3008 ! Q3009 Q3010 ! Q3011 Q3402 Q3404 Q3407 Q3409 Q3410 Q3411 Q3603 Q3607 Q3608 Q3610 Q4301 Q5801 Q5802 Q5803 Q5804 Q6201 Q6202 Q6203 Q6204 Q7003 Q7004 Q7005 ! L501 L503 L504 L3001 L3002 L3003 L3004 L3005 L3603 L3604 L5801 L5805 L6561 L7001 L8501 L8502 L8504 ! T501 ! T7001 ! T7002 ! J301 ! J501 J4301 J4302 J8101 J8102 J8103 J8104 SW2201 SW2202 SW2203 SW2204 SW2205 SW2206 SW2207 SW2208 PCB130 PCB240 PCB270 PCBDA0 PCBDH0 B303 B307

TSB P/N
AE009621 BZ510071 AE009514 AE009514 AE008933 BZ510107 BZ510109 BZ510071 BZ510107 BZ510109 BZ510109 AE009515 AE009515 AE009515 BZ510109 BZ510109 AE009515 AE009515 AE009515 AE009515 AE009515 AE009515 BZ510072 BZ510071 BZ510113 AE009516 AE009516 AE005143 BZ310150 AD301785 BZ310150 AE009517 BZ310150 AE009518 BZ310150 AE009519 AE009519 72784092 AE009260 AE005284 AD301785 AE008874 AE006570 AE006570 AE009520 AE009660 AE009660 AE009522 AE009523 AE009524 AE009522 AE009526 AE009527 AE009528 AE009529 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 BZ612010 AE009661 AE009662 AE009663 AE009664 AE009665 AE009535 AE009535

Reference No.
TL4A01664Y TNAAB05003 TJ7T35P020 TJ7T35P020 TJ5MC61080 TPAAA05001 TCAA3875SY TNAAB05003 TPAAA05001 TCAA3875SY TCAA3875SY T27T030190 T27T030190 T27T030190 TCAA3875SY TCAA3875SY T27T030190 T27T030190 T27T030190 T27T030190 T27T030190 T27T030190 TPAAC05002 TNAAB05003 T27T030180 T250A06J30 T250A06J30 029X000416 02167E220K 02167E100K 02167E220K 0218MG5R2P 02167E220K 0218MG220P 02167E220K 02D1000119 02D1000119 0216SD220J 021AS9224J 0216S8220K 02167E100K 0216SD2R2J 0216SD1R0J 0216SD1R0J 0481240018 048135113G 048135113G 060R131024 064Q1A0010 060R401140 060R131024 062R750007 060R411058 060R431039 060R431040 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 A50T01C130 A50T01C240 A50T01C270 A50T01CDA0 A50T01CDH0 024HC13914 024HC13914

Description TRANSISTORS
TRANSISTOR SILICON COMPOUND TRANSISTOR FET FET FET COMPOUND TRANSISTOR TRANSISTOR SILICON COMPOUND TRANSISTOR COMPOUND TRANSISTOR TRANSISTOR SILICON TRANSISTOR SILICON FET FET FET TRANSISTOR SILICON TRANSISTOR SILICON FET FET FET FET FET FET COMPOUND TRANSISTOR COMPOUND TRANSISTOR FET FET FET COIL,LINE FILTER COIL COIL COIL COIL COIL COIL COIL COIL CHOKE COIL CHOKE COIL COIL COIL COIL COIL COIL COIL TRANSFORMER,SWITCHING TRANSFORMER,SWITCHING TRANSFORMER,SWITCHING HEADPHONE JACK JACK,AC RCA JACK HEADPHONE JACK PLUG RCA JACK RCA JACK RCA JACK SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT KTA1664-Y(GP) KRC102SRTK RTQ035P02-TR RTQ035P02-TR TPC6108 KRA101SRTK KTC3875S_Y_RTK KRC102SRTK KRA101SRTK KTC3875S_Y_RTK KTC3875S_Y_RTK 2SK3019_TL 2SK3019_TL 2SK3019_TL KTC3875S_Y_RTK KTC3875S_Y_RTK 2SK3019_TL 2SK3019_TL 2SK3019_TL 2SK3019_TL 2SK3019_TL 2SK3019_TL KRA103SRTK KRC102SRTK 2SK3018T106 TK30A06J3(ORION.Q) TK30A06J3(ORION.Q) SS24H-10100 22 UH 10 UH 22 UH 5.2 UH 22 UH 22 UH 22 UH EXC28CG900U EXC28CG900U 22 UH 0.22 UH 22 UH 10 UH 2.2 UH 1 UH 1 UH 81240018 8135113G 8135113G PJ-364H CCT2302-0901C RCA-101HT(OR) PJ-364H DIN-417HA-01 RCA-341H(NI)-09 RCA-228H(3)NI-02 RCA-341H(2)NI-06 EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R DMG097A CEG362A CEG363A CEG364A CEG360A HCB3216KF-391T20 HCB3216KF-391T20

COILS &TRANSFORMERS

JACKS

SWITCHES

DVD MT PCB ASS'Y POWER PCB ASS'Y OPERATION PCB ASS'Y REMOCON PCB ASS'Y DIGITAL PCB ASS'Y CORE,BEADS CORE,BEADS

P.C.BOARD ASSEMBLIES

MISCELLANEOUS

K3-13

22LV505

ELECTRICAL REPLACEMENT PARTS LIST


Location No.
B308 B501 B2304 B2305 B2800 B2801 B2803 B2804 B2805 B2806 B2807 B2808 B2809 B2810 B2811 B2812 B2813 B2815 B2816 B2817 B2820 B2821 B2822 B3003 B3004 B3005 B3006 B3007 B3008 B3009 B3010 B3011 B3012 B3013 B3014 B3015 B3016 B3017 B3022 B3023 B3601 B4001 B4002 B4003 B4005 B4006 B4008 B4010 B4015 B4016 B4301 B4302 B4303 B4304 B5801 B5802 B5803 B5804 B6201 B6202 B6551 B6552 B6553 B6554 B6556 B8501 B8502 B8503 B8504 BT001 BT002 CD301 ! CD501 CP501 CD2804

TSB P/N
AE009535 BZ310129 AE008552 AE008552 AE007761 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE009536 AE008394 AE008394 AE008394 AE008394 AE008394 AE008394 AE008394 AE007761 AE007761 AE007761 AE007761 AE007761 AE007761 AE007761 AE007761 AE007761 AE007761 AE007761 AE007761 AE007761 AE008609 AE007761 AE008609 AE008609 AE007761 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008552 AE008610 AE008395 AE008610 AE008610 AE008609 AE008609 AE008609 AE008610 AE008609 AE008609 AE008394 AE008609 AE008609 AE008609 AE007761 AE008394 AE008552 AE008394 AE008552 AE008217 AE008217 AE009666 AE009538 AE008882 AE009539

Reference No.
024HC13914 024HT03564 024NC51021 024NC51021 024AC5181J 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024HC52216 024BC5121J 024BC5121J 024BC5121J 024BC5121J 024BC5121J 024BC5121J 024BC5121J 024AC5181J 024AC5181J 024AC5181J 024AC5181J 024AC5181J 024AC5181J 024AC5181J 024AC5181J 024AC5181J 024AC5181J 024AC5181J 024AC5181J 024AC5181J 024HC51023 024AC5181J 024HC51023 024HC51023 024AC5181J 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024NC51021 024HC51513 024HC56005 024HC51513 024HC51513 024HC51023 024HC51023 024HC51023 024HC51513 024HC51023 024HC51023 024BC5121J 024HC51023 024HC51023 024HC51023 024AC5181J 024BC5121J 024NC51021 024BC5121J 024NC51021 141U004016 141U004016 06E8142403 120Q119905 06977NM020 06EA2U2503

Description MISCELLANEOUS
CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS BATTERY,MANGAN BATTERY,MANGAN CORD CONNECTOR CORD SET AC CONNECTOR PCB SIDE CORD CONNECTOR HCB3216KF-391T20 W4BRH3.5X6X1.0 EBMS160808A102_RDC45 EBMS160808A102_RDC45 BLM18PG181SN1D HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 HCB1608KF-221T20 BLM18PG121SN1D BLM18PG121SN1D BLM18PG121SN1D BLM18PG121SN1D BLM18PG121SN1D BLM18PG121SN1D BLM18PG121SN1D BLM18PG181SN1D BLM18PG181SN1D BLM18PG181SN1D BLM18PG181SN1D BLM18PG181SN1D BLM18PG181SN1D BLM18PG181SN1D BLM18PG181SN1D BLM18PG181SN1D BLM18PG181SN1D BLM18PG181SN1D BLM18PG181SN1D BLM18PG181SN1D FCM1608KF-102T02 BLM18PG181SN1D FCM1608KF-102T02 FCM1608KF-102T02 BLM18PG181SN1D EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 EBMS160808A102_RDC45 FCM1608KF-151T06 FCM1608CF-600T06 FCM1608KF-151T06 FCM1608KF-151T06 FCM1608KF-102T02 FCM1608KF-102T02 FCM1608KF-102T02 FCM1608KF-151T06 FCM1608KF-102T02 FCM1608KF-102T02 BLM18PG121SN1D FCM1608KF-102T02 FCM1608KF-102T02 FCM1608KF-102T02 BLM18PG181SN1D BLM18PG121SN1D EBMS160808A102_RDC45 BLM18PG121SN1D EBMS160808A102_RDC45 MNAAA(R03) MNAAA(R03) E8142403 P201-2476-2 127301123K2 EA2U2503

K3-14

22LV505

ELECTRICAL REPLACEMENT PARTS LIST


Location No.
CD3002 CD6202 CD6203 CD7005 CD7006 CP2201 CP2301 CP2302 CP2303 CP2801 CP2803 CP2804 CP3001 CP3002 CP3602 CP4301 CP4303 CP6201 CP7601 CP8101 ! CP8501 CP8502 CUS151 EL2401 ! F501 ! F7001 FH501 FH502 NR2801 NR2802 NR2803 NR2804 NR2805 NR2806 NR2807 NR2808 NR2809 NR2810 NR2811 NR2812 NR2813 NR6551 OS7601 ! SP301 ! SP302 ! TH501 TM101 ! TU5801 ! V2801 X2801 X2802 X3601 X4001 X6201 X6551

TSB P/N
AE009540 AE009541 AE009542 AE009622 AE009622 AD301795 AE008156 AE009544 AE009545 AE009546 AE009547 AE009548 AE008886 AE009549 AE009550 AE008886 AE009551 AE009552 BZ614440 AE008882 AE009553 AD301796 BZ710279 BZ614043 AD302166 AE004626 AE002634 AE002634 AE009554 AE009554 AE009554 AE009554 AE009555 AE009555 AE009555 AE009555 AE009555 AE009556 AE009556 AE009556 AE009556 AE009557 AE008414 AE009558 AE009558 AE009559 AE009560 AE009623 AE009667 AE009563 AE009564 AE009565 AE009566 75006971 AE009567

Reference No.
06E82M1101 06CH231204 06CU251301 06E82E1201 06E82E1201 069S230639 069KYOT159 069EV5T060 069EV6T060 06GG290029 06GG2C0029 069S2U0739 06CK7N0301 069S2M0079 06GDYL3038 06CK7N0301 06G7S21501 06GG2B0029 069S250639 06977NM020 06GG2E0019 069S280629 800WFAA006 124116281A 081PC04005 083LA05007 06710T0009 06710T0009 11074100M7 11074100M7 11074100M7 11074100M7 11074270M7 11074270M7 11074270M7 11074270M7 11074270M7 11074220M7 11074220M7 11074220M7 11074220M7 11074470M7 077A033001 070Y433004 070Y433004 DSQDNE5R0L 076D0LT030 0164100027 09EA122001 100GT02728 100GT02509 100GT01807 100GT02727 100GT01615 100DT01217

CORD CONNECTOR CORD CONNECTOR CORD CONNECTOR CORD CONNECTOR CORD CONNECTOR CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CORD CONNECTOR CONNECTOR PCB SIDE CONNECTOR PCB SIDE CORD CONNECTOR CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CUSHION A EYE LET FUSE FUSE HOLDER,FUSE HOLDER,FUSE R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK R,NETWORK REMOTE RECEIVER SPEAKER SPEAKER THERMISTOR TRANSMITTER DIGITAL TUNER LCD CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL

Description MISCELLANEOUS

E82M1101 CH231204 CU251301 E82E1201 E82E1201 A2001WR2-3P LD07T2-24ND-03 04_6232_105_015_800+ 04_6232_106_015_800+ A2001WV-9A A2001WV-12A A2006WV0-2X15P TWG-P23P-A1 A2006WV0-2X11P 1A0300030 TWG-P23P-A1 WD-00021-R A2001WV-11A A2001WR2-5P 127301123K2 A2001WR-14A A2001WV2-8P XRY16X28BD 51MS040L 1206FA5A-T EYF-52BCY EYF-52BCY CRA108100JV CRA108100JV CRA108100JV CRA108100JV CRA108270JV CRA108270JV CRA108270JV CRA108270JV CRA108270JV CRA108220JV CRA108220JV CRA108220JV CRA108220JV CRA108470JV ROM-V338TAO S0308F01 S0308F01 5D2-08LCS 000-103000530 ENG36E18KRF T220SW01_VO SMD-49 C27000B030 SMD-49 C25000H025 SMD-49 C18432B022 SMD-49 C27000J029 B16000E007 DS0321SRAB

RESISTOR RC................... CARBON RESISTOR CAPACITORS CC................... CERAMIC CAPACITOR CE................... ALUMI ELECTROLYTIC CAPACITOR CP................... POLYESTER CAPACITOR CPP.................POLYPROPYLENE CAPACITOR CPL................. PLASTIC CAPACITOR CMP................ METAL POLYESTER CAPACITOR CMPL.............. METAL PLASTIC CAPACITOR CMPP..............METAL POLYPROPYLENE CAPACITOR

K3-15

22LV505

1-1, SHIBAURA 1-CHOME, MINATO-KU, TOKYO 105-8001, JAPAN

TOSHIBA CORPORATION

S-ar putea să vă placă și