Documente Academic
Documente Profesional
Documente Cultură
BBU Connections
RRU Connections
Local Debug
LED Indicators
Power
To Antenna
Subrack 20
Sector A RRU
Subrack 21
Sector B RRU
Subrack 22
Sector 3 RRU
Expedience Co-existence
On overlay including the Seattle market, it is very important to check Wimax and Expedience noise floor for potential interference. Take Expedience baseline noisefloor prior to maintenance window. After Wimax is transmitting, measure Expedience and Wimax noisefloors for interference. Have had interference caused by bad jumpers.
X 4
Interfaces R1 air interface R2 logical interface from MS to CSN (authentication, QoS) R3 ASN to CSN R4 inter-ASN (we dont have yet) R5 inter-CSN (pseudo with Sprint) R6 BS to ASN (mobility signaling) R8 BS-to-BS (mobility handovers)
Site Construction
Offline ATP
Backhaul Established
Network Commissioning
Integrate site into network. BS receives commercial configuration and is managed by the M2000. Provisioned into the ASN. LV Commissioning Validate commercial parameters, network entry, mobility, throughput. Field Ops
Online ATP
Augments, too.
Network Optimization
Scan and HO triggers, neighbors are adjusted for optimal mobility performance. RF Engineering
Commercial Ready
All data is entered into the ATP form and sent to RF engineering for approval.
For cluster optimization, RF engineering adjusts the following for optimal mobility performance:
Handover triggers Minimize ping-ponging and drops. Scan triggers Minimize scanning time as much as possible. Neighbors Keep neighbors lists as small as possible.
MML Commands
Maintenance -> MML Command. Huaweis command line interface for the BTS. Some commands are restricted.
Performance History
Performance -> Query Result.
Alarms
Monitor -> Current Fault Alarms
Site Retune
Site retunes are performed to change frequency, preamble, and permbase. This change does require disabling carriers and will require a MOP of market is commercial. A short MML script is executed that blocks, makes changes, and then unblocks. If error is made, the original configuration can be restored.
Additional Resources
Huawei M2000 RF Configuration Guide (attached) Huawei BTS Troubleshooting Guide (attached) Questions?