Documente Academic
Documente Profesional
Documente Cultură
http://wiki.waggy.org/dokuwiki/me5413/hw_10
Problem 7.6
Invert the plane stress form of Hooke's law (7.2.2) and express the stresses in terms of the strain components.
, , .
(7.2.2) [1] ,
[2]
[3] .
Problem 7.7
1 of 4
12/11/2012 3:31 PM
http://wiki.waggy.org/dokuwiki/me5413/hw_10
Using the results from Exercise 7-6, eliminate the stresses from the plane stress equilibrium equations and develop Navier equations (7.2.5). Also, formally establish the Beltrami-Michell equation (7.2.7).
= =
=0=
=0=
2 of 4
12/11/2012 3:31 PM
http://wiki.waggy.org/dokuwiki/me5413/hw_10
Problem 7.15
Explicitly develop the governing equations (7.5.4) in terms of the Airy function for plane strain and plane stress.
No thank you. What would I gain from digging through another avalanche of basic algebraic manipulations?
Problem 8.1
Show that the fourth-order polynomial Airy stress function the biharmonic equation unless
.
. =0= =0.
Problem 8.2
Show that the Airy function
solves the following cantilever beam problem, as shown in the following figure. As usual for such problems, boundary conditions at the ends (x=0 and L) should be formulated only in terms of the resultant force system, while at y = c the exact pointwise specification should be used. For the case with N=0, compare the elasticity stress field with the corresponding results from strength of materials theory. Answer:
3 of 4
12/11/2012 3:31 PM
http://wiki.waggy.org/dokuwiki/me5413/hw_10
= 0.
at N=0.
Problem 8.6
I wish I had time for this one, but a dump truck took down the power, phone, and cable lines to my house this morning, while I was working on this assignment. It took until after lunch to straighten that out, and I only got this far in the time remaining.
4 of 4
12/11/2012 3:31 PM