Documente Academic
Documente Profesional
Documente Cultură
OLOOMBONYAN
Document Title: Protective Coating Specification Job No. : 3344-00GC/GN/CON-EPC2-00 Contractor Document No.: IMT-PL-SP-008/D0 Client Document No. :
334430-001-ED-PL-SP-0008-A0
Page 1 Of 3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ISSUED FOR
REVIEW APPROVAL INFORMATION
4 3 2 1 0 Rev.
M.Mansouri Prepared By
M.Motamedi Approved By
Approved By Client
Date
N.I.O.E.C
OLOOMBONYAN
Document Title: Protective Coating Specification Job No. : 3344-00GC/GN/CON-EPC2-00 Contractor Document No.: IMT-PL-SP-008/D0 Client Document No. :
334430-001-ED-PL-SP-0008-A0
Page 2 Of 3
SCOPE
This specification covers the minimum requirements for Pipeline Protective Coating of Imam Taghi Pump Station - Increasing Capacity" Project.
DEFENITIONS
For the purpose of this specification, the following definitions shall apply: COMPANY/CLIENT NATIONAL IRANIAN OIL ENGINEERING AND CONSTRUCTION COMPANY (N.I.O.E.C.) CONTRACTOR The firm whose tender has been accepted by the COMPANY, which is consortium of Hirbodan/Oloom Bonyan Co. ENGINEER The representative of the COMPANY who is entrusted with inspection of works which is Darya Pala Eng. Co. PURCHASER The party entering into a contract or agreement to purchase commodity ,which is consortium of Hirbodan/ Oloom Bonyan Co. SUPPLIER/VENDOR The vendor/ supplier/ manufacturer of commodity. MANUFACTURER INSPECTOR The party that manufactures the commodity. The representative of the COMPANY or PURCHASER who is entrusted with inspection of commodity , production records, observance of production operations and quality control tests.
N.I.O.E.C
OLOOMBONYAN
Document Title: Protective Coating Specification Job No. : 3344-00GC/GN/CON-EPC2-00 Contractor Document No.: IMT-PL-SP-008/D0 Client Document No. :
334430-001-ED-PL-SP-0008-A0
Page 3 Of 3
SUPPLEMENT TO IPS
The following point to the IPS standard is considered to cover the requirements of this project:
NO CHANGE
ATTACHMENT
IPS-M-TP-321 IPS-M-TP-310 material standard for primers (ditch and yard) to be used with cold-applied inner layer material standard for cold-applied laminated plastic pipes original edition IPS-M-TP-311 material standard for cold-applied laminated plastic tape as outer-layer tape for tape coating system of buried steel pipes tape as inner-layer tape for tape coating system of buried steel