Sunteți pe pagina 1din 3

Phoenix Service Software 2012.16.004.

48159 Cracked & Original

Main component versions in the release: Product API 2012.14.7

Nokia Connectivity Cable USB Driver Version 7.1.78.0 Flash Update Package 2012.11 Envira CL 2012.16 FUSE Connection Manager v 2012.14 MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2012.4.3.47798 Error Corrections & changes: New products: RM-653, RM-840, RX-103, RM-862, RM-864, RM-811, RM-827, RM-807, RM-841, RM871, RM-863, RM-810, RM-812, RM-837 Please note: Energy Management Calibration should not be performed for products using the Quantum engine (RM RM-653 settings added

689, RM-702, RM-704 and other product using the same engine)

Microsoft DOT.NET version 2 Service Pack 2 is now the minimum requirement. Phoenix installation will check PC for the DOT.NET version and update it automatically when PC has online connection. Without online connection, old DOT.NET versions must be updated manually. Center for further information. New common data package location in use. Please see document SR1315 in KICS Information All Nokia Service Software Applications will use following location for product specific data: - Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages - Windows 7: C:\Program Data\Nokia\Packages

Please see articles SR1774 for more information on the use of Nokia Data Package manager tool, and article SR1854 for more information on the Nokia Service Application Manager Tool. During installation, Data Packages should be installed in these directories, if they install to any other

location by default. target folder for local data packages can be changed in the installation wizard manually This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Before you start Phoenix or Care Suite installation to Windows 7 the User Account Control (UAC) For more information concerning new options in Firmware Update menu and their use, Please Tucson operations combined with flash option are now handled in the same way as Use of Flash option simultaneously with product code change for USB Only phones is restricted. It is

Add-On Installation Packages

should be turned off from Windows Control Panel settings.

see documents SR1313 and SR1659 in KICS Information Center.

refurbishment, which requires Mass Memory Content File to be available.

recommended to flash phone separately with Firmware Update. Please refer to product specific

instructions.

Connection media to FLS-5 must be configured to be USB_FBUS, after FLS-4 support has been KNOWN ERRORS & LIMITATIONS

removed FBUS does not work anymore with FLS-5 N9- RM-696 Product Code change still unreliable serviced in 64 bit operating systems Package 2 concept.

FLS-5 drivers do not support 64 bit OS, so phones using FLS-5 /USB_FBUS connection can not be Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore. FLS-5 can If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong.

be used with other product specific cables and adapters, but not with SS-46 Interface Adapter.

This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite check that Phoenix Prommer maintenance is looking for the files from the correct location which is

current information during installation. If you experience problems when updating FPS-x prommers, please C:\Program Files\Common Files\Nokia\Tss\Flash. If not, Phoenix will show error Update via ini file failed. In this case, select Update from that Phoenix Prommer maintenance UI, browse to correct directory and select fpsxupd.ini for all other prommers except the FPS-8. FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version

11 has been released to correct this. Sales pack code is 0089J83 , old HW version is not delivered anymore product

Please refer to product specific documents and instructions concerning the limitations of the RX-51 When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older

Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is finished. When using Data Package download functions with online connection, download times may

occasionally be long. This is not caused by Phoenix (or Care Suite). The download speed from online servers is occasionally is known to be slow, depending on how data is buffered on caching servers. After you close Phoenix, it may not restart. To rectify this: - Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or It is not possible to program Mass Media Content file to some devices over direct USB cable

optionally restart your PC

connection, due to the large size of the file. For these models a feature called Media Check has been implemented. When this type of product is connected to service software / PC via direct USB cable the are: RM-122, RM-175, RM-176, RM-186, RM-246, RM-247, RM-296, RM-297, RM-320, RM-462, RM-472, RM-484, RM-505, RM-555, RM-559 To be able to use the help files in Windows 7 you need to install Windows Help program - Start Phoenix with online connection to Internet, select Help and Phoenix help. Click the Microsoft refurbishment option will be disabled. Please use a flash prommer. Affected products using Media Check

(WinHlp32.exe) for Windows 7. Ways to locate WinHlp32.exe:

Help and Support website link. Download WinHlp32 and install it.- Go to Microsoft Corporation: Software,

Smartphones, Online, Games, Cloud Computing, IT Business Technology, Downloads program (WinHlp32.exe) for Windows 7 and install it

(http://www.microsoft.com). Type WinHlp32 to Search Microsoft.com field. Locate Windows Help When using flash prommers, only one connection type to one prommer is allowed. Please use either Supported operating systems and user rights Windows XP Service Pack 1 or higher

NFPD USB or NFPD TCPIP connection to one prommer, not both connections to same prommer

When installing Phoenix into Win XP you must have local admin rights. When using in Win XP, user must have power user rights. Windows 7 32 Bit version Windows 7 64 Bit version (Please note that FLS-5 drivers do not support Win 7 64 bit OS, therefore

FLS-5 can not be used in this operating system)

S-ar putea să vă placă și