Documente Academic
Documente Profesional
Documente Cultură
23692 Birtcher Drive Lake Forest, California 92630 (949) 462-0100 Fax: (949) 462-0200 Support: (949) 462-0400 Email: support@etap.com www.etap.com
Analysis Capabilities
The analysis capabilities available to you will depend on the configuration of modules purchased.
Load Flow
New double-precision Newton-Raphson method with current injection Phase-shifting transformer New summary output report on bus loadings and overload conditions New Alert View to display critical and marginal limit violations
Short-Circuit
CB Duty calculation based on the maximum-through fault current (ANSI) Phase-shifting transformer for ANSI unbalanced faults New Alert View to display critical and marginal limit violations New Arc Flash analysis program for determining incident energy and flash protective boundary (ANSI and IEC)
Harmonics
Filter Overloading I*T Index Phase-shifting transformer Customizable output reports using Crystal Reports format
2001 Operation Technology, Inc. All rights reserved. Disclosure, use, or reproduction without written authorization by Operation Technology, Inc. is strictly prohibited. Certain names and / or logos used in this document may constitute trademarks, servicemarks, or tradenames of Operation Technology, Inc. or other entities. Simulink is a registered trademark of The Mathworks, Inc., and CrystalTM Reports is a registered trademark of Seagate Software.
Transient Stability
Synchronous motor exciter/AVR system Automatic CB operation based on instantaneous relay settings Overcurrent (50/50G) Directional Overcurrent (67) Reverse Power (32) Motor Overcurrent (50M) Solid State Trip (SST) Loss of excitation action New plots for machine terminal impedance (for out-of-step relay setting) New plots for branch flows (MW, Mvar, MVA, and Amps) IEEE models for Power System Stabilizers (PSS) New manufacture models for exciters and governors User-defined Dynamic Models (UDM) interface for: Exciter/AVR Governor - Turbine Power System Stabilizer Complete integration with UDM for the Generator Start-Up program Phase-shifting transformer Segment (fractional) faults for cables and transmission lines Remote voltage control bus for all exciters
Libraries
Reliability Index Library Interruption Cost Library Expanded existing library data
Sensitivity analyses for EENSs and ECOSTs: Element contributions to the EENS and their rankings Element contributions to the ECOST and their rankings Customizable output reports using Crystal Reports format
Cable Ampacity
Build your own governor/turbine, exciter/AVR, and Power System Stabilizer control block diagrams for Transient Stability analysis Large selection of control blocks and elementary functions Stand-alone test model performance including isolated step response Complete integration with Generator Start-Up analysis Run-time compile within ETAP PowerStation Utilize models within the Transient Stability Program Select user-built models within generator editors Utilizes block diagrams generated by Simulink Implement system-wide operations such as load shedding, fast bus transfer, islanding, etc.
Motor Starting
Phase-shifting transformer
Calculate battery discharge using an existing battery or using a battery that is automatically sized by ETAP Battery discharge using DC Load Flow method or load summation method Generate plots and reports using Crystal Reports Use different diversity and correction factors such as, temperature, aging, initial capacity, and initial conditions Plots for battery duty cycle, voltage, capacity, current, power and characteristics Plots for branch flow, bus voltage, and bus loading
3-phase 3-wire and 4-wire panels 1-phase 2-wire and 3-wire panels Graphic user interface Unlimited circuits with or without external connections Unlimited sub-panel connections External (graphical) load and branch connections Spreadsheet load modeling Column and standard layouts ANSI and IEC standard panels Extensive switching device libraries Comprehensive circuit feeder/cable libraries User-configurable defaults and layouts Dynamic sub-panel and main-panel schedule updates User selectable load types (LCL, NCL, warehouse, receptacle, hospitals, etc.) User modifiable demand and diversity factors (NEC and others) Ten loading categories per circuit Customizable panel schedules using Crystal Reports format Intelligent panel calculations Detailed panel loading summary
One-Line Diagrams
Single-Phase System (2 and 3 wires) Remote Connector Panel Systems Phase Adapter Ground Grid Systems New Relays Active X (Programmable Objects) XML Data Exchange
Minimum PC Requirements
Intel Pentium II 128 MB of RAM 500 MB available hard drive space 1024x768 resolution Parallel Port (stand-alone licensing only)
Recommended PC Configuration
Intel Pentium IV or higher 512 MB of RAM 2 GB hard disk 21" monitor with 1024x768 resolution Internet Explorer 5.0 or higher Parallel Port (stand-alone licensing only) Microsoft Windows 2000 Professional or XP Professional