Documente Academic
Documente Profesional
Documente Cultură
COMMERCIAL
Indianapolis, Indiana 46206
ENGINE
BULLETIN
March ENGINE, ANTI-ICING VALVE POPPET SE:AT SCREWSPECIAL INSPECTION PLANNING INFORMATION: EFFECTIVITY:
31 , 1977
All Model 250 Series I and II Engine Assemblies prior to the following serial numbers: Model Cl8
c20
Serial No. CAE 803563B CAE 823337 excluding CAE 823333 CAE 830402 excluding CAE 830391, 830397 and 830398 CAE 850100 CAE 870060 CAE 880187
In the anti-icing valve, a AN500D4-4 Screw (No. 4-40 x l/4 inch) retains the seat to the poppet. Although the sc:rew is staked at assembly, loose screws were found at routine maintenance and overhaul. To assure satisfactory operation of the anti-icing valve, a special inspection of the poppet seat retaining screw is recommended within the next 100 flight hours.
DESCRIPTION:
COMMERCIAL
ENGINE
BULLETIN
Loose screws, meaning easy removal with normal finger pressure, are to be reinstalled and restaked securely.
Not affected. It is recommended that this bulletin be accomplished once within the next 100 flight hours. FAA-DER Approved Approximately 1.0 man-hour will be required to complete this bulletin. None
COMMERCIAL
ENGINE
BUL.LETIN
Disconnect the linkage from the valve control arm. Clip the lockwire and remove the poppet guide (10, Figure I), poppet (13) and seat (11) assembly, and lever (9) as an assembly from valve body (15). Do not disassemble for inspection. Check the poppet seat screw (12, Figure 1) for looseness by backing out with finger pressure. If found loose, retighten and restake screw (ding threads) through witness hole. Reinstall lever, poppet and poppet guide assembly to valve body. Tighten coupling nut to 65 - 75 lb. in. and lockwire. Check run the valve per the respective 250 Operation and Maintenance Manual.
C.
D.
E.
IL
Record compliance with Cl8 CEB-170, C20/C20B CEB-1115, B15G TP CEB-51, or B17/B17B TP CEB-1075 in the engine assembly (white pages) Inspection Record, Part III of the Engine Log Book.
COMMERCIAL
ENGINE,
ENGINE
BULLETIN
SEAT SCREW-
1. 2. 3. 4. 5.
6. Pin 7. Washer 8. Pin 9. Lever 10. Poppet Guide ANTI-ICING VALVE FIGURE 1
ENGINE
ASSEMBLY
COMMERCIAL
ENGINE,
ENGINE
BUL-LETIN
SEAT SCREW-
ANTI-ICING
VALVE FIGURE
POPPET 2
ASSEMBLY
250-Cl8 CEB-170 250- C20/C20B CEB-1115 250-B15G TP CEB-51 250-Bl?/B17B TP CEB-107 Page 6
COMMERCIAL
ENGINE
BULLETIN
ENGINE, ANTI-ICING VALVE POPPET SEAT SCREWSPECIAL INSPECTION MATERIAL INFORMATION: New P/N 6856983 !a! 1 Nomenclature Valve Assy, Anti-icing Old P/N 6856983 Qty 1 Disposition A