Documente Academic
Documente Profesional
Documente Cultură
Product specification
A723/723C
DESCRIPTION
The A723/A723C is a monolithic precision voltage regulator capable of operation in positive or negative supplies as a series, shunt, switching, or floating regulator. The 723 contains a temperature-compensated reference amplifier, error amplifier, series pass transistor, and current limiter, with access to remote shutdown.
PIN CONFIGURATION
D,F, N Packages
NC 1 CURRENT LIMIT 2 CURRENT SENSE 3 INVERTING INPUT 4 14 NC 13 FREQUENCY COMPENS. 12 V+ 11 V C 10 V OUT 9 8 VZ NC
FEATURES
Positive or negative supply operation Series, shunt, switching, or floating operation 0.01% line and load regulation Output voltage adjustable from 2V to 37V Output current to 150mA without external pass transistor A723 MIL-STD-883A, B, C available
ORDERING INFORMATION
DESCRIPTION 14-Pin Ceramic Dual In-Line Package (CERDIP) 14-Pin Plastic Dual In-Line Package (DIP) 14-Pin Plastic Small Outline (SO) Package
SL00503
EQUIVALENT CIRCUIT
FREQUENCY COMPENSATION 12 V+ VIN 13 11 VC
VREF 8
SL00504
1994 Aug 31
853-1063 13721
Philips Semiconductors
Product specification
A723/723C
TSTG TSOLD
NOTES: 1. The following derating factors should be applied above 25C F package at 9.5mW/C N package at 11.4mW/C D package at 8.3mW/C
1994 Aug 31
Philips Semiconductors
Product specification
A723/723C
DC ELECTRICAL CHARACTERISTICS
TA=25C, unless otherwise specified.1 SYMBOL VR LINE VR LOAD VIN/ VO IOS VREF VREF (LOAD) VNOISE S ISCD VIN VOUT VDIFF PARAMETER Line regulation2 Load regulation2 TEST CONDITIONS VIN=12V to VIN=15V VIN=12V to VIN=40V IL=1mA to IL=50mA f=50Hz to 10kHz, CREF=0 f=50Hz to 10kHz, CREF=5F RSC=10, VOUT=0 IREF=0.1mA IREF=0.1mA to 5mA BW=100Hz to 10kHz, CREF=0 BW=100Hz to 10kHz, CREF=5F Tj=Tjmax. TA=25C for end point measurment IL=0, VIN=30V 9.5 2.0 3.0 20 2.5 0.1 2.3 3.5 40 37 38 9.5 2.0 3.0 6.95 A723 Min Typ 0.01 0.02 0.03 74 86 65 7.15 7.35 20 20 2.5 0.1 2.3 4.0 40 37 38 6.80 Max 0.1 0.2 0.15 Min A723C Typ 0.01 0.1 0.03 74 86 65 7.15 7.50 20 Max 0.1 0.5 0.2 UNITS %VOUT %VOUT dB mA V mV VRMS %1000 hrs. mA V V V
Ripple Rejection Short-circuit current Reference voltage Reference voltage change with load Output noise voltage Long-term stability Standby current drain Input voltage range Output voltage range Input-output voltage differential Line regulation Load regulation Average temperature coefficient of output voltage
NOTES: 1. VIN=V+=VC=12V, V-=0V, VOUT=5V, IL=1mA, RSC=0, C1=100pF, CREF=0 and divider impedance as seen by error amplifier10k. 2. The load and line regulation specifications are for constant junction temperature. Temperature drift effects must be taken into account separately when the unit is operating under conditions of high dissipation.
1994 Aug 31
Philips Semiconductors
Product specification
A723/723C
3.0
120
80
0.2
40
0 0 10 20 30 40 50 INPUT VOLTAGE V
0 0 10 20 30 40 50 (VIN VOUT) V
0.6
120
120
0.05
80
80
0.1
0.4
40
40
0.15
0 0 10 20 30 40 50 (VIN VOUT) V
LOAD DEVIATION mA
1.0
+0.1
C1 = 0
C1 = 1F 0.1
4.0
0.1
8.0 TIME s
.01 100
1k
10k
100k
1M
FREQUENCY Hz
SL00505
1994 Aug 31
Philips Semiconductors
Product specification
A723/723C
+0.1 0
0.1
2.0 6.0 45
4.0 5 5 15 25 35 TIME s
SL00506
TYPICAL APPLICATIONS
VIN
V+
VC VOUT
R2 V+ VREF RSC CL CS
VC VOUT VZ R5 T1
VREF R1
REGULATED OUTPUT R4
CL CS N.I. INV
N.I. CREF
INV C1
R3
R2
V COMP
R3
R1
COMP
100pF
C1 100pF
REGULATED OUTPUT
R3 +
SL00507
1994 Aug 31
Philips Semiconductors
Product specification
A723/723C
V+ VREF
VC VOUT
RSC
REGULATED OUTPUT
V+ VREF
VC VOUT RSC
R1
CL CS INV
REGULATED OUTPUT
R1 R2
V COMP
R2
COMP
C1
1nF
100pF
R3 +
16 OUTPUT VOLTAGE DEVIATION V VC VREF VOUT VZ R1 CL CS N.I. R2 INV R4 R3 RSC REGULATED OUTPUT 14 12 10 8 6 4 2 0 0 NOTES: V I KNEE + R V (R 3 ) R 4) OUT 3 SENSE ) R R4 R R SC SC 4 R1 ) R2 R4 V V I SHORT CKT + R3 ) R4 SENSE X R R4 SC R SC + SENSE I SC 1 ) R3 R4 10 20 ISHORT 30 40 50 60 RSC = 3.4 R4 = 3.6k R3 = 500 IKNEE
COMP
C1
1nF
OUTPUT CURRENT mA
OUT
V REF X
Foldback Current Limiting Regulator (VOUT = 2 to 7V) Figure 6. Typical Applications (cont.)
SL00508
1994 Aug 31