Documente Academic
Documente Profesional
Documente Cultură
Liner
Drill Pipe
Rat Hole
O/H Annulus
D/P Annulus
- Casing ID2
______________ 1029.4
- Casing ID2 - Casing ID2 Drill Pipe OD2 Drill Pipe OD2 ____________ ____________ 1029.4 1029.4
ID (Tech) Barrels per Foot (ID2 / 1029.4) (Tech) Feet per Barrel (1 / BF) (Tech) (Tech) (Tech) (Tech) (Tech) (Tech) (Tech) (Tech) (Tech) (Tech)
(OD2 - ID2) x .785 (OD2 - ID2) x .785 OD2 x .785 (LOD2 - StingerOD2) x .785 Stinger OD 100mm = 3.94 70mm = 2.76
Mud#
Drill Pipe Top
CMT#
Bottom of Liner OD
S#
TOL OD Buoyancy Factor (BF)
Length DP Top
Volume
V3
Shoe Track
V4
Rat Hole
V5
O/H Annulus
Total=
V6
Liner over lap
V7
TOC to TOL
V8
Spacer
V9
DP to surface
V10
[=]
3) Bouyed DP Weight
Length of DP1 Weight of DP1 Buoyancy Factor
x
Length of DP2 (Top) Weight of DP2 (Top)
x
Buoyancy Factor
[=]
[=]
2) Hook Load
Liner Bouyed Weight DP Bouyed Weight
[+]
[=]
(
( 30,000,000 DP2 Liner Bouyed Weight
x
DP1 Area
) [=] )
DP2 Top Length
(
( 30,000,000
x
DP2 Top Area
) [=] )
5) Length of Work String needed to set 20,000# onto TOL while cementing liner
F ( ( 30,000,000 F ( ( 30,000,000 x DP2 Top Area x ) x DP1 Area x DP2 Top Length ) ) DP1 Length )
[=]
[=]
V8=
Top of Liner
(=)
(+/-) (=) TOC= add if cement is below the Liner top subtract if cement is above the Liner top
x
TOC /Top of Liner if below
(=)
(-)
(=) TOS=
If the spacer is in the Liner overlap figure out how many barrels in the overlap and subtract that from the
barrels of spacer pumped to complete question 7. (Length of Spacer in overlap x Overlap bpf) 9) Maximum strain that can be pulled on Work String if stuck at Top of Liner
Note: If using two workstrings, the answer will always be the lesser of the two
DP1 Tensile Drill Pipe Grade DP1 Bouyed Weight
[-]
DP2 Tensile Drill Pipe Grade Total DP Bouyed Weight
[=]
[-] Note: Answer is smaller value of DP1 or DP2 max over pull
[=] [=]
(
Max over pull
x
workstring Length
)/
( 30000000 X
DP2 Top Area
)/
( 30000000 X
0.052 x 0.052 x
Length of Spacer x
0.052 x 0.052 x
Length of Spacer x
0.052 x 0.052 x
Original Liner Bouyed Weight (Add) Total down force (Add) Total down force (Subtract) Total up force (Subtract) Total up force New Weight
(=)
V7=
V3=
LC
LC Depth=
V6=
V4=