Documente Academic
Documente Profesional
Documente Cultură
Thickness/
Width Ultimate UTS Mpa
Sr. No. Type of Test Gauge Dia. Area mm2 Character of Failure & Location
mm Load N 410 Min.
Mm
1 Tensile T-1 16.1 18.52 298.17 132840 445.52 Broken out of weld metal
2 Tensile T-2 15.95 18.27 291.4 130240 446.95 Broken out of weld metal
NOTE :
1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.
2.Results given above refer only to the samples submitted for testing.
Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 1
7315
6565
6/27/2008
NOTE :
1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.
2.Results given above refer only to the samples submitted for testing.
Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 2
7315
6565
TEST CERTIFICATE - Reinforcing Steel
SSSBE REGD. NO. 041909004 &VUDA REGD. NO. UDA/PLAN-05/233/2005
NOTE :
1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.
2.Results given above refer only to the samples submitted for testing.
Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 2
7315
6565
TEST CERTIFICATE - Reinforcing Steel
SSSBE REGD. NO. 041909004 &VUDA REGD. NO. UDA/PLAN-05/233/2005
NOTE :
1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.
2.Results given above refer only to the samples submitted for testing.
Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 2
7315
6565
TEST CERTIFICATE - Reinforcing Steel
SSSBE REGD. NO. 041909004 &VUDA REGD. NO. UDA/PLAN-05/233/2005
NOTE :
1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.
2.Results given above refer only to the samples submitted for testing.
Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 2
7315
6565
TEST CERTIFICATE - Reinforcing Steel
SSSBE REGD. NO. 041909004 &VUDA REGD. NO. UDA/PLAN-05/233/2005
NOTE :
1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.
2.Results given above refer only to the samples submitted for testing.
Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 2
7315
6565